BrightLinkInteractionThreeinteractivemodesareavailable:
Whiteboard mode
Useoneortwointeractivepenstowriteontheprojected“whiteboard.”Youcaninsertimagesfromathumbdriveorscannerandsave,print,oremailyourwhiteboard“pages,”withoutconnectingacomputer.
Annotation mode
Easilyswitchbetweensourcesandaddnotestoyourprojectedcontent.Captureyourscreens,thensave,print,oremailtheimageswithannotations.Youcanevensplitthescreentoannotateontwoimagesatthesametime.
Interactive computer mode
Usetheinteractivepenasamousetonavigate,select,andscrollthoughcontentfromyourcomputer.Splitthescreenandinteractwithtwoprojectedimages.YoucandoevenmoreifyouinstallEasyInteractiveToolsonyourcomputer.
QuickReferenceThiscardwillhelpyougetstartedusingyourBrightLinkProinteractiveprojector.
1 Turning on and Calibrating the Projector
• Using the Remote Control
2 Using the Pens and Control Pad
3 Using Whiteboard Mode
4 Connecting a Computer and Using Annotation Mode
5 Using Interactive Computer Mode
• Splitting the Screen
BrightLinkProFeatures• Projectanimagefromacomputer,DVDplayer,cable
box,USBthumbdrive,orotherdevice
• Splitthescreenandprojecttwoimagesatthesametime
• Holdavideoconferencewithoutaflatpaneldisplay
• Projectwirelesslyfromatabletorsmartphone
SeetheonlineUser’s Guideformoreinformationaboutthesefeatures.
BrightLink®Pro
1 TurningonandCalibratingtheProjector
Toturnontheprojector,presstheredororangepowerbuttonontheremotecontrol,controlpad,or
ontheprojectoritself.
Calibrationcoordinatesthepositionofthepenwiththelocationofyourannotations.Yourprojectormayalreadybecalibrated.Ifnot,followtheinstructionsbelow:
1 Tocalibrateautomatically,presstheUserbuttonontheremotecontrol.Youseethefollowing:
2 PressEntertoselectYes.Apatternappears.
3 Waituntilcalibrationiscomplete.
Ifyouseeamessagethatcalibrationfailed,orthepenpositionandcursorlocationdon’tmatch,youcancalibratemanually.PresstheMenubuttonontheremotecontrol,thenselectExtended menu > Easy Interactive Function > Manual CalibrationandpressEnter.Followtheinstructionsonthescreentocalibratemanually.
UsingtheRemoteControl
Select from various image sources connected to the projector
Save the projected image
Select whiteboard mode (turns on the projector if it is off)
Switch between annotation mode and interactive computer mode
Enter
Turn projector on/off
Capture the projected image
Access menu system for additional
adjustments
Auto-calibrate
Page through documents
Project 2 images at the
same time
Print the projected image
Formoreinformationonusingtheremotecontrol,seetheonlineUser’s Guide.YoucaninstallalinktotheUser’s GuidebyinsertingtheBrightLinkPro1410WiCD.Orgotoepson.com/brightlinkdownloads(U.S.)orepson.ca/brightlinkdownloads(Canada).
• Toturnonthepen,slidethepowerswitch.Thegreenlightcomesonbriefly.Ifthebatteryislow,thelightflashes.
• Holdthepenperpendiculartotheboard,asshownbelow.Donotcovertheblacksectionofthepen.
Note:Thepensturnoffautomaticallyafterabout20minutesofinactivity.Slidetheswitchtoturnthepenbackon.
2 UsingthePensandtheControlPad
Theprojectorcamewith2pensthathavedifferentcoloredends,orangeandblue.MakesureoneAAbatteryisinstalledineachpen.
Battery light
Power switch
Remove the top cover to install batteries or connect the control pad to the projector or to a printer. See the online User’s Guide for more information.
Select whiteboard mode (turns on the projector if it is off)
Select from various image sources connected to the projector
Save the projected image
Turn projector on/off
Capture the projected image (switch to whiteboard to
paste the captured image)
Connect USB cable from computer (on bottom of
control pad)
Connect USB thumbdrivePrint the projected image
3 UsingWhiteboardMode
• Toprintanimageorseriesofimages,selectthePrinticon(orpressthePrintbuttononthe
remotecontrolorcontrolpad).Makesureasupportedprinterisconnectedtothecontrolpad(ortoyournetwork).
• Toemailanimageorseriesofimages,selecttheEmailicon.Beforeyoucanemail,youneed
tosetmailserveroptionsusingtheprojector’sExtendedmenu.SeetheonlineUser’s Guideforinstructions.
Youcanusethepenstodraworwriteontheprojectionsurface.
• Toscanapaperdocumentandimportit,selecttheScanicon.Makesureasupportedall-in-one
deviceisconnectedtothecontrolpad(ortoyournetwork),thenplaceadocumentonthescannerglassorintheautomaticdocumentfeeder.
• Todisplaythumbnailimagesofthepagesinthecurrentsession,selectthepageonthebottomtoolbar.Usethearrowsordragthepentoscrollthroughthepages.
PresstheWhiteboardbuttonontheremotecontrolorcontrolpad.Youseethefollowingtoolbars:
Select whiteboard mode
Redo
Zoom in or out
Select an inserted image to move, resize, or rotate
Insert a circle, square, triangle, or other shape
Use black, red, or blue pen—select large dot for thick line
Erase—select large dot for thick eraser
Clear everything on screenClose toolbar
Select annotation mode
Undo
Insert a background pattern
Crop an inserted image
Insert a jpg or png image from a thumbdrive or network folder
Change custom pen color and width
Change highlighter pen color and width
Use black, red, or blue pen—select small dot for thin line
Erase—select small dot for thin eraser
Hide toolbar after each annotation
Show or hide toolbar Show or hide toolbar
Start a new whiteboard session
Scan and insert an image
Save the projected image or a series of images on a thumbdrive or network folder
Display help
Insert a jpg, png, or pdf file from a thumbdrive or network folder
Open a new page
Print the projected image
Email the projected image (requires advance setup)
Thumbnail images of pages in current session
1 Connectthedeviceyouwanttoprojectfrom.
• ConnectwirelesslytoanotebookcomputerusingtheWindows®ConnecttoaNetworkProjectorutility(withoutaudio),orEasyMPNetworkProjection.
• ConnectwirelesslytoatabletorsmartphoneusingtheEPSONiProjectionapp.
• Connectusingacable,asshownbelow.
USB
HDMI
VGA
Display Port
2 Displayanimagefromyourdevice.Ifanimagedoesnotappear,tryoneofthefollowing:
• OnsomePClaptops,youmayneedtoholddowntheFnkeyonthekeyboardandpressF7orthefunctionkeythatletsyoudisplayonanexternalmonitor.Itmayhaveaniconsuchas ,oritmaybelabelledCRT/LCD.
• OnaMac,youmayneedtoopenSystemPreferencesandselectDisplays.SelecttheVGA/HDMI DisplayorColor LCDoptionifnecessary,thenclicktheArrangeorArrangementtabandselecttheMirror Displayscheckbox.
• TrypressingtheSource Searchbuttonontheremotecontrolorcontrolpad.
3 Turnononeofthepensandhovernearortaptheprojectedimage.Youseethesetoolbarsonyourprojectedimage:
4 ConnectingaComputerandUsingAnnotationMode
Select whiteboard mode
Redo
Zoom into image
Use custom pen
Use hightlighter
Use black, red, or blue pen—select large dot for thick line
Erase—select large dot for thick eraser
Clear everything on screen
Close toolbar
Switch between annotation mode and interactive computer mode
Select annotation mode
Undo
Freeze action in videos
Change custom pen color and width
Change highlighter color and width
Use black, red, or blue pen—select small dot for
thin line
Erase—select small dot for thin eraser
Hide toolbar after each annotation
Print the projected image
Split the screen
Show or hide the bottom toolbar
Save the projected image on a thumbdrive
or network folder
Capture the projected image
EPSONisaregisteredtrademarkandEPSONExceedYourVisionisaregisteredlogomarkofSeikoEpsonCorporation.
BrightLinkisaregisteredtrademarkofEpsonAmerica,Inc.
GeneralNotice:Otherproductnamesusedhereinareforidentificationpurposesonlyandmaybetrademarksoftheirrespectiveowners.Epsondisclaimsanyandallrightsinthosemarks.
Thisinformationissubjecttochangewithoutnotice.
©2012EpsonAmerica,Inc.10/12
PrintedinXXX CPD-38221
SplittingtheScreen
1 PresstheSplitbuttonontheremotecontrolorselectthe Spliticononthescreen.Thecurrentprojectedimageappearsontheleft.
2 PresstheMenubuttonontheremotecontrol.YouseetheSplitScreenSetupmenu:
3 SelectSourceandpressEnter.
4 Selectthesourceyouwanttousefortherighthalfofthescreen.Ifyouwanttowriteonablankscreen,selectanyunusedsource.
5 SelectExecute,thenpress Enter.
5 UsingInteractiveComputerMode
1 ConnectaUSBcablefromyourcomputertotheUSB-Bportonthebottomofthecontrolpad.
Connect computer to port on the bottom
IfyourcomputerisconnectedtotheprojectorwirelesslyusingEasyMPNetworkProjectionversion2.81orlater,youdon’tneedaUSBcable.
IfyouareusingMacOSX,youneedtoinstallEasyInteractiveDriverfromtheCDthatcamewiththeprojector,labeled“EPSONProjectorSoftwareforEasyInteractiveFunction.”
2 PressthePen Modebuttonontheremotecontrolorselectthe Pen Modeicononthescreen,thenselectthe Mouseicon.
Youcanusethepenasamousetointeractwiththeprojectedimage.
• Toleft-click,tapontheboard.
• Todouble-click,taptwice.
• Toright-click,presstheboardwiththepenforabout3seconds.
• Toclickanddrag,tapanddragwiththepen.
• Tomovethecursor,hoverovertheboardwithouttouchingit.
• Whenyouarefinished,slidethepowerswitchtoturnoffthepen.
FormoreinformationonanyBrightlinkProfeatures,seetheonlineUser’s Guideatepson.com/brightlinkdownloads(U.S.)orepson.ca/brightlinkdownloads(Canada).
*412409400**412409400*