*Prices and specifications are subject to change without prior notice. 115
Product Catalogue 2013
MMA160 Inverter Arc Welding Machine DIAMOND Technical specification: -‐ • Input Voltage Single Phase 220-‐240V • Rated Input Current 30A • Idle Voltage 60V • Output Current Adjustment 20-‐160A • Rated Output Voltage 26.4V • Rated Duty Cycle 60% • Power Capacity 6.6KVA • Idle Loss 30W • Power Factory 0.93 • Efficiency 85% • Weight 3.8KG 6.8KG • Dimension(MM) 300*140*190 350*160*300
CGS255 CO2/ MIG welding machine HKUNICO Feature:-‐ • Welding and spot welding continuously. • Can weld STEEL, STAINLEE STEEL and ALUMINIUM. • Easily set the current pulse width / the interval of current pulse width /
the current magnitude / the wire-‐feeded rate. • Optional kinds of welding wires: STEEL, STAINLEE STEEL, ALUMINIUM,
THLE/UHTS (BORON STEEL).
Technical specification: -‐ • Power supply: 220V/50Hz/1Ph • Welding current: 250A 30% • Input power: 8KVA • No-‐load voltage: 20 – 40V • Current step adjustment: 10 • Wire feeding rate: 2 ~ 25m/min • Welding wire diameter: 0.8 ~ 1.2mm • Dimension: 42 x 85 x 75cm • Weight: 82kg
116 *Prices and specifications are subject to change without prior notice.
MIG210 CO2/ MIG welding machine DIAMOND Technical specification: -‐ • Main Power Supply Voltage: AC 220 -‐ 240V Single Phase • Operating Frequency: 50 -‐ 60Hz • Open Circuit Voltage: 22 -‐ 45V • Voltage Selector: 6 Steps • Max. Load 100% Duty Cycle: 90A • Max. Load 60% Duty Cycle: 120A • Max. Load 20% Duty Cycle: 210A • Output Current Range: 50 -‐ 210A • Overload Protection: Thermostat • Wire Diameter: 0.80 -‐ 1.00mm • Wire Speed: 2 -‐ 12 m/min • Spot/Intermittent Timer: 0.2 -‐ 2.5 seconds • Weight: 61kgs • Dimension (WxDxH): 330 x 762 x 635mm • Standard Accessories: -‐ • 4m Welding torch x 1no • CO2Regulator x 1no • Earth clamp cable x 1no • 0.8mm MIG Wire (15Kgs) x 1 roll
MIG210F CO2/ MIG welding machine with wire feeder DIAMOND Technical specification: -‐ • Main Power Supply Voltage: AC 220 -‐ 240V Single Phase • Operating Frequency: 50 -‐ 60Hz • Open Circuit Voltage: 22 -‐ 45V • Voltage Selector: 6 Steps • Max. Load 100% Duty Cycle: 90A • Max. Load 60% Duty Cycle: 120A • Max. Load 20% Duty Cycle: 210A • Output Current Range: 50 -‐ 210A • Overload Protection: Thermostat • Wire Diameter: 0.80 -‐ 1.00mm • Wire Speed: 2 -‐ 12 m/min • Spot/Intermittent Timer: 0.2 -‐ 2.5 seconds • Weight: 61kgs • Dimension (WxDxH): 330 x 762 x 635mm Standard Accessories: -‐ • 4m Welding torch x 1no • CO2Regulator x 1no • Earth clamp cable x 1no • 0.8mm MIG Wire (15Kgs) x 1 roll
*Prices and specifications are subject to change without prior notice. 117
Product Catalogue 2013
CGS-TIG200A DC Inverter TIG welding machine HKUNICO Feature:-‐ • Advanced electronic circuit and MOSFET inverter technology adapted. • High frequency starting with pulsation thermal initiation design. • Handy power supply with effective energy saving. • Automatic voltage pulsation compensation. • Fast dynamic response, noise free, low spatter and without magnetic
bias. • Portable and light weight for easy relocation. Technical specification: -‐ • Input Voltage / Frequency: 220V±10% 1Ph 50/60HZ • Rate input power capacity(KVA): 4.6 • Output current range(A): 10~200 • Rate output voltage(V): 18 • O.C.V(V): 56 • Duty cycle(%):100% at 10A, 100% at 100A, 60% at 200A • Efficency(%): 85 • Post-‐flow time(S): 5 • Welding thickness(mm): 0.3~10.0 • Weight(KG): 9
WSEM315 AC/DC Inverter TIG welding machine HKUNICO Features:-‐ • Inverter TIG welder • IGBT inverter technology • AC/DC Pulse output • High frequency welding equipment • HF Arc-‐starting, Pulse control and strong welding penetration • Be satisfied with requirements of technological welding • Applicable to weld on Carbon Steel, Stainless Steel, Copper, Aluminum, Al-‐Mg
Alloy materials • Aluminum Oxide film cleaning up area is legible when welding Aluminum at
alternative current, Welding pool has good flow-‐ability and welding seam looks good and bright
Technical Specification: -‐ Model WSEM-‐315 Rated Input Voltage (AC3)380V Rated Input Capacity(KW) 9.3 Rated Input Current(A) 14.4 Output Current Range(A) 5-‐315 Pulse Frequency Range(A) 1-‐100 Rated Duty Cycle(%) 60 AC TIG Output Frequent (HZ) 60 TIG Arc Starting HF MMA yes Efficiency (%) 85 Power factor 0.85 Insulation Class F Weight(kg) 40