CONFORMITY No KH.1001 - CE AC0049
Product ID: KH.1001
Name: Hinge
Size A=100 B=30 C=76 D=3
Mini Door Thickness (mm) 44
Door Mass (Kg) 120
Classification 13
Description Ball Bearing
Finish Grade 304-SSS, PSS, PB
Grade 316 KH.1002 -SSS, PSS, PB
Fixing (mm) WS - 6.0 X 30 - Template
Options Radius Corner - KH.1003
Security Dog Bolt KH.1004
This certificate is the property of Warrington Certification Limited, part of Exova (UK) Ltd. Registered office: Lochend Industrial Estate, Newbridge, Midlothian, EH28 8PL, UK. Registered in Scotland, No. SC 70429
CERTIFICATE OF APPROVALNo CF 5247
This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
KCC ARCHITECTURAL Unit 1, Westgate Business Park, Ballymount Industrial Estate,
Dublin 24 Tel: 00 353 1 4567421 Fax: 00 353 1 4567409
Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions
appended hereto:______________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE
KCC Architectural Stainless Steel Hinges
TS24 The Contribution of Single Axis Hinges to the Fire Resistance of Door Assemblies
Signed and sealed for and on behalf of CERTIFIRE
Sir Ken Knight Issued: 28th May 2014 Chairman - Management Council Valid to: 19th December 2018 Page 1 of 5
This certificate is the property of Warrington Certification Limited, part of Exova (UK) Ltd. Registered office: Lochend Industrial Estate, Newbridge, Midlothian, EH28 8PL, UK. Registered in Scotland, No. SC 70429
CERTIFICATE No CF 5247KCC ARCHITECTURAL
Page 2 of 5 Signed Issued: 28th May 2014Valid to: 19th December 2018
KCC Architectural Stainless Steel Hinges
1. This approval relates to the use of the KCC Architectural stainless steel, single axis hinges referenced KH1001 and KH1001RC in contributing to the fire resistance performance of timber based doorsets, as defined by EN 1634-1 or BS 476: Part 22, for periods of 20 and 30 minutes integrity or metallic based doorsets, for periods of 30, 60, 90, 120 or 240 minutes integrity. Subject to the undermentioned conditions, the doorsets will meet the relevant requirements of BS 5588 for doorsets when used in accordance with the provisions therein.
2. This certification is designed to demonstrate compliance of the product or system specifically with Approved Document B (England and Wales), Section D of the Technical Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.
3. The hinges are approved on the basis of:
i) Initial type testing to EN 1935 ii) A design appraisal against TS24 iii) Certification of quality management system to ISO 9001: 2008. iv) Inspection and surveillance of factory production control v) On-going audit testing in accordance with EN 1935 requirements
4. The products are stainless steel, single axis hinges, for use on various classes of doorsets. The hinges are Class 13.
5. This certification relates only to the following hinge variants:
Hinge Dimensions Maximum Leaf Weight
KH1001 102 x 76 x 3mm 120 kg
KH1001RC 102 x 76 x 3mm 120 kg
6. This approval relates to the above hinges used with latched or unlatched single-leaf or double-leaf door assemblies consisting of timber faced and edged leaves with timber, cellulosic or mineral cores and in timber frames (Code ITT) not less than 45 mm thick. The door frame shall consist of timber with a minimum density of 450 kg/m³ (with leaf to frame gaps less than 3mm), for FD20, FD30, E30 and EI30 applications. The hinges must be bedded onto 1 mm of mono ammonium phosphate material behind both blades.
This certificate is the property of Warrington Certification Limited, part of Exova (UK) Ltd. Registered office: Lochend Industrial Estate, Newbridge, Midlothian, EH28 8PL, UK. Registered in Scotland, No. SC 70429
CERTIFICATE No CF 5247KCC ARCHITECTURAL
Page 3 of 5 Signed Issued: 28th May 2014Valid to: 19th December 2018
KCC Architectural Stainless Steel Hinges
7. This approval also relates to the above hinges used with latched or unlatched single-leaf or double-leaf door assemblies consisting of metallic faced and edged leaves hung within metallic frames (Codes MM and IMM) not less than 45 mm thick, for up to FD240, E240 and EI240 applications.
8. The above hinges may only be fitted to previously tested timber door assemblies when fitted in the manner described in this certificate and when particular aspects of the door assembly are maintained.
9. Hinges shall only be fitted using the fixings supplied by the hinge manufacturer.
10. The doorset, including door frame and associated building hardware, should be either CERTIFIRE approved for the relevant application and classification or the doorset, including door frame and associated building hardware, should have achieved at least 30 minutes fire resistance when tested, or subsequently assessed to BS 476: Part 22: 1987 or EN 1634-1. In either case regard should be paid to the maximum door mass permitted to be used with the hinge (see classification).
11. Timber doorsets shall be installed in accordance with BS 8214: 2008.
12. The approval relates to on-going production. Product and/or its immediate packaging is
name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.
This certificate is the property of Warrington Certification Limited, part of Exova (UK) Ltd. Registered office: Lochend Industrial Estate, Newbridge, Midlothian, EH28 8PL, UK. Registered in Scotland, No. SC 70429
CERTIFICATE No CF 5247KCC ARCHITECTURAL
Page 4 of 5 Signed Issued: 28th May 2014Valid to: 19th December 2018
KCC Architectural Stainless Steel Hinges
Matrix of acceptable doorset types
Approved Door TypeClass IMM MM TT ITT ITM ITCFD20
FD30
FD60
FD120
FD240
E 20
EI 20
E 30
EI 30
E 60
EI 60
E 90
EI 90
E 120
EI 120
E 240
EI 240
See CERTIFIRE Technical Schedules for designation of doorset types i.e. ITT etc.
Key: - Approved
- Not approved
This certificate is the property of Warrington Certification Limited, part of Exova (UK) Ltd. Registered office: Lochend Industrial Estate, Newbridge, Midlothian, EH28 8PL, UK. Registered in Scotland, No. SC 70429
CERTIFICATE No CF 5247KCC ARCHITECTURAL
Page 5 of 5 Signed Issued: 28th May 2014Valid to: 19th December 2018
KCC Architectural Stainless Steel Hinges
Scope of Approval:
The hinges may be fitted to doorsets without intumescent protection for up to 20 minutes integrity.
All applications apply to glazed and unglazed doorsets.
Both blades of the hinges must be bedded onto 1 mm of mono ammonium phosphate material when used with TT or ITT doorsets.
The door frame of TT and ITT doorsets shall consist of timber with a minimum density of 450 kg/m³ (with leaf to frame gaps less than 3mm).
Classification codes
The approval provides the following classifications:
KH1001 & KH1001RC
Further Information
Further information regarding the details contained in this certificate may be obtained from KCC Architectural (Tel: 00 353 1 4567 421).
Further information regarding CERTIFIRE certification and other approved products can be obtained from CERTIFIRE (Tel: 01925 646777).
4 7 6 1 1 4 0 13
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom
T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : [email protected] W: www.exova.com
Registered Office: Exova (UK) Ltd, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Reg No.SC 70429
Title:
The Fire Resistance Performance of Doorsets Incorporating Various Items of Frisco Door Furniture
WF Assessment Report No:
169279 Issue 4
Prepared for:
Frisco (UK) Sales Ltd
Unit 14 Pindar Road Essex Road HoddesdonHertsEN11 0DE
Date:
8th February 2008
WF Assessment Report No. 169279 Issue 4
Page 13 of 48
14101/2/3 The models 14101, 14102 and 14103 are all mild steel ball bearing butt hinges of identical design to the tested 14851. These models differ from each other only in respect of their finishes which are satin chrome, polished chrome and electro brass respectively. The change of material from that of the tested mild steel hinge to mild steel for the proposed hinge models is not considered to have any negative influence on the performance of the hinges when used in the proposed application with 30 minute fire resisting timber based doors. The proposed hinges are therefore positively appraised.
Eclipse Hinge Range – Steel Based Doors
Of the range of hinges previously discussed, several models are currently Certifire approved (CF336). Of these, the following models have additional approval for use with steel based doorsets for fire resistance periods of up to 240 minutes.
14858, 14860, PK858, PK860, 14854, 14853, PK854, PK853, 14882, PK882, 14861, 14869, 14872, 14879, 14883, 14884, 14866, 14888, 14889 and Insignia 14929, 14930, 14931, 14932, PK929, PK930, PK931 & PK932.
The above hinges are all of stainless steel construction and have been approved for use with steel based doorsets for fire resistance periods of up to 240 minutes. It is therefore considered acceptable that the scope of use for these hinge models, when fitted to steel based doorsets, may also be included in this appraisal.
The following requirements of the doorset are however considered to be essential:
The doorset must have provided the required 20, 30, 60, 120 or 240 minute integrity performance when tested at a UKAS accredited laboratory in accordance with BS 476: Part 22: 1987 or EN 1634-1: 2000, be assessed for the required period by Exova Warringtonfire or be CERTIFIRE approved for the required period.
The tested/assessed doorset as described above must have been tested or assessed in the required configuration i.e. number of leaves and action.
The maximum door mass shall be commensurate with the class of the relevant hinge and shall not be exceeded.
A full list of the positively appraised Eclipse Hinge Range items is included within the Annex to this report.
Eclipse Security Range
The Eclipse Security Range incorporates several mortice latch/locks the dimensions and materials of which are comparable to those of the ‘Eclipse ez-R’ sashlock included within the test referenced WF No. 167471. This test demonstrated that the inclusion of the ‘Eclipse ez-R’ sashlock had no deleterious effects upon the tested timber based doorset for in excess of 60 minutes and based upon this it is considered that the proposed Black Antique Range locks may be included with suitable timber based doorsets, as detailed below:
WF Assessment Report No. 169279 Issue 4
Page 37 of 48
Eclipse Hinge Range
Name Code Integrity with timber doors Additional Information
BallBearingHinges
1485814860PK858PK8601485414853PK854PK85314882PK88214841148691487214875
to14878
to14935
Up to 60 minutes Suitable doorset specifications are described on Page 12 of this report 4 Ball
BearingHinges
14861
RadiusCorner Ball
BearingButt Hinges
1486914872148791480114802
BallBearing
Butt Hinges
1488314884
SecurityButt Hinges
148661486714902
WasheredHinges
148561484814886
InsigniaHinges
14929149301493114932PK920PK930PK931PK932
Page 1 of 2
EC CERTIFICATE OF CONFORMITY
Number: 1121 - CPD - AC0049
In compliance with Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Construction Products Directive - CPD), amended by the Directive 93/68/EEC of the Council of European Communities of 22 July 1993, it is confirmed that the following products are subject to factory production control procedures and are submitted by the manufacturer to further testing of samples taken at the factory in accordance with a prescribed test plan. The stated Notified Certification Body has performed the initial type-testing for the relevant characteristics of the product, has conducted the initial inspection of the factory and the factory production control, and is responsible for the continuous surveillance, assessment and approval of the factory production control.
construction product : Eclipse range detailed on page 2
placed on the market by:
Company: Frisco UK Address: Unit 14,Essex Road, Hoddeson, Hertfordshire, EN11 0AA
product classification:
intended use: For use on fire / smoke compartmentation doors and on escape route doors
This document certifies that all the provisions concerning the attestation of conformity and product performance described in Annex ZA of the product standard
were applied and that the product fulfils all the prescribed requirements.
Notified Certification Body: Warrington Certification Ltd EC Reference Number: 1121
This certificate was first issued on 28/01/2004 revised on 01/04/2010 and remains valid as long as the conditions laid down in the harmonised technical specification above, or the product design, or the manufacturing conditions in the factory, or the FPC itself are not modified significantly, or at the latest 31/03/2015.
References: Mechanical test evidence: 128704, 128708, 128709, Fire test evidence: 134350, 134351
128710, 128715 and 128718 134768 and 135669 Factory references: J/006 Classification report: N/a
* The referenced reports detail the precise field of application for fire/smoke door use
Manager – Warrington Certification Ltd.
4 7 6 1* 1 4 0 13
EN 1935 : 2002
Page 2 of 2
EC CERTIFICATE OF CONFORMITY
Number: 1121 - CPD – AC0049
Hinge reference Description
14854
4” x 3” x 3mm 304 Satin Stainless steel
14853
4” x 3” x 3mm 304 Polished Stainless steel
14879
4” x 3” x 3mm Brass plated with radiused corners
14882
4” x 3” x 3mm Brass Plated stainless steel
14869
4” x 3” x 3mm 304 Satin Stainless steel with radiused corners
14872
4” x 3” x 3mm 304 Polished Stainless steel with radiused corners
14889
4” x 3” x 3mm 304 Satin Stainless steel with radiused corners
14888
4” x 3” x 3mm 304 Polished Stainless steel with radiused corners
14883
4” x 3” x 3mm 316 Satin Stainless steel
14884
4” x 3” x 3mm 316 Polished Stainless steel
Notified Certification Body: Warrington Certification Ltd EC Reference Number: 1121
This certificate was first issued on 28/01/2004 revised 01/04/2010 and remains valid as long as the conditions laid down in the harmonised technical specification above, or the product design, or the manufacturing conditions in the factory, or the FPC itself are not modified significantly, or until 31/03/2015, whichever is the latest.
Manager – Warrington Certification Ltd.
KH1001
1
Construction Products Regulation 2011
DECLARATION OF PERFORMANCE
DoP No. KCC‐014
1. Unique identification code of the product‐type: Single Axis Hinge
2. Type, batch or serial number or any other element allowing identification of the construction product as required under Article 11(4) of the CPR: KH.1001.
3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: For use on fire and smoke compartmentation doors, when fitted in accordance with the manufacturer's fitting instructions.
4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5): KCC Architectural, Unit 1, Westgate Business Park, Ballymount, Dublin 12, Ireland Tel: +353 (0)1 456 7421 Web: www.kccarchitectural.com 5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2): N/A 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in CPR, Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard. EN 1935 : 2002 Notified product certification body No. 1121 performed the type testing and issued test reports. 8. European Technical Assessment: N/A
KH1001
2
9. Declared Performance – Figure 1
10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by:
Chris Kilpatrick Managing Director Date of issue: 1st July 2013 KCC Architectural, Unit 1, Westgate Business Park, Ballymount, Dublin 12 Ireland