1
Product catalogue Home and Building Automation
In networksAt home In enterprises
2
®
General notes on this catalogue This catalogue is being updated frequently due to the ever growing range of products, technical changes as well as new or changed performance characteristics. Texts, illustrations and graphs presented in this product catalogue are used exclusively for explanatory purposes and assistance in planning and ordering myGEKKO along with the appropriate accessories. Please do not hesitate to contact us if questions concerning myGEKKO arise. We are pleased to be at your disposal. Our terms and conditions can be found at www.my-gekko.com.As of May 2013. The information in this documentation is provided without guarantee. Changes and updates are in the interests of progress and subject to change.
CopyrightAll rights reserved. Without the the prior written permission of the publisher, no part of this document for any purpose, be reproduced or transmitted, and regardless of any form or by any means, electronic or mechanical, this is happening. If this publication is made available on media by Ekon GmbH, Ekon GmbH grant permission, copies of the information contained in this file is only for private use and not to download or print for redistribution. No part of this publication may be changed, modified or used for commercial purposes. Ekon is not liable for damages resulting from the use of an illegal modified or altered publication.
Brands and logos contained in this catalogue are registered trademarks of their respective owners.
Warranty Ekon GmbH assumes no responsibility for this material including, but limited to the implied warranties of merchantability and suitability for a particular pur-pose. Ekon GmbH cannot be held responsible for any errors herein or indirect damages, which might result from the use or application of the materials.
The devices comply with the relevant guidelines and standards of the EU.
3
Table of Content
myGEKKO Touch - Operator panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
myGEKKO Apps - Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Flexible installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
myGEKKO Rio modules for distribution boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Wago . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Beckhoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Phoenix Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Enocean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 BACnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 KNX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
myGEKKO Extensions - System extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Access - Control via card or fingerprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 SMS - Remote control and alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Multiroom Music - Music in all rooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Weather station - Using the weather for control purposes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Video - Surveillance and intercom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 M-BUS - Interface for power control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Alarm and fire detection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
System diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4
1.000 possibilities - 1 product
Lighting atmosphere Brightness control RGB colour light control
Manual positioning Positioning according to the sun position Control depending on wind / rain
Sockets off (standby) Mains cut-off device (electrosmog) Time-controlled switching
Movement detector and window contacts Home surveillance via Web SMS / e-mail alerts
Programmable in accordance with IEC 1131 Expandable standard functions Graphics
Control of heating/water/power Daily/monthly lists in euros Graphic trend curves
Single-level and multi-level activation Operating according air quality Control of heat recovery
Single room control Heating circuits regulation Control of boiler and solar heating
Temperature monitoring Automats / filling level Free choosable surveillance
Limit alarms History Costumizable measuring
Lights
Ventilation
Heating / Cooling
Alarms
Consumption measurement
Shutters / blinds
Electronic equipment
Alarm system
Logics
Power consumption
5
Fingerprint scanner or card reader Linkable with alarm system Integrated recording
Home surveillance Video station Recording control
Freely adjustable by the end user Presence simulation Heating cycles
Via Web / SMS Control and surveillance Access via mobile phone, Windows, Mac, ...
Directly via touch / push- button No PC necessary Backup/update via USB
Optimized power loads Reduction of peak currents Aggregate function
Sprinkling areas Protection against over-irrigation Activation at sunrise and sunset
Multi-room function MP3, Internet radio Control via button / touchscreen
Central power-off Holiday / coming back home Barbecue / relax
With music Wake-up service in accord with Dr. Schreiner Coffee machine, roller shutters and light control
For shading, irrigation Conservatory control Weather book / Weather trend
Weather forecast Moon and sun signs Digital picture frames
Load rejection/ energy optimization
Access
Cameras
Timer
Display
Music
Scenarios
Sprinkling
Wake-up Service
Weather station
Remote control
Operation
6
Smart technologyThe myGEKKO touch, the ‘smart’ part of the system, represents the core of the equipment. Commissioning, re-calibration, adjustment and extension – everything is set up directly at the myGEKKO Touch via intuitive user guidance.
When it comes to installation myGEKKO provides all possible in-terfaces to various installation and media bus systems. Regard-less of whether Modbus, myGEKKO, Enocean or KNX: The ideal cable connection depends on the conditions of the building and the users themselves. Push-buttons, sensors, lights, etc. can be used freely. The components are connected to the respec-tive modules or interfaces and via these to the myGEKKO Touch.
What is so great about myGEKKO?
With myGEKKO the landlord can set the system optimally ac-cording to his needs. New time clocks and scenarios can be created and changed very easily with just a few key strokes. The push-button, which controlled the blinds today, might be used to manage the sound or lighting system tomorrow.
In addition, the system properties can be modified at any time. If the exterior lighting has always been switched via a motion sensor, it is, for example, not a problem to control it via time clocks in the future.
A major advantage of myGEKKO is that the landlord can make the entire changes himself.
The myGEKKO Software is continuously being adapted and expanded to technological innovations. Updates of the system are available without charge to our customers in order that they are able to enjoy long-term benefits from the new developments of myGEKKO.
The system can be expanded almost indefinitely by new functions at any time and with only little effort thanks to its modular design. Build today and keep yourself open to all pos-sibilities in the future!
myGEKKO Touch(p. 14)
myGEKKO App(p. 18)
Lights, roller, ... Accessories(p. 52)
System expansion(p. 41)
Flexible installation (p. 24)
RIO modules Wago, Beckhoff, Phoenix
Enocean, BACnet, KNX
7
Central handling
Living areas
Functions
Heating
Example living room
Timer – alarm clock
Example bathroom
Weather forecast Power consumption – trend
8
Private residences myGEKKO is optimally adapted to the features of residences and apartments. It takes over control of lights, roller shutters, heating as well as music and irrigation systems. The individual systems can be controlled and monitored via a neatly arranged surface. Settings and adjustments can be made easily by the landlord himself.
Universally applicable
Receive visitorsDo you want to know who’s at the door before answering it? myGEKKO shows it to you and answers the door on request.
A pleasant indoor climateSwitch your ventilation system comfortably via time clocks or automatically via air quality sensors.
Personalise easilyYou can make quick and easy changes to the system, program time clocks and create scenarios on the display.
Feel safeDo you get scared when you hear about a burglary in your area? Take precautions and protect yourself so that you can sleep well and feel safe.
Use the weatherYou do not know how you could use the weather?There are many possibilities. You may, for example, let the roller shutters close or deactivate the irrigation system during heavy rains or control the shading ele-ments according to the position of the sun. You will be amazed.
9
Informed at all timesAre you on the way and do not remember whether the lights are turned off or the heating is turned down? A short SMS is enough to drive away your wor-ries.
Heat simplySave cash by optimising heat-ing control with myGEKKO. Take advantage of the many opportu-nities to customise your heating system to your daily routine!
Consumption controlHave you ever been frightened by high water, electricity or heat-ing bills? This need not be! Keep informed about consumption levels and intervene actively in your home’s energy management.
Realising gardening dreamsDo you lack the time to take care of your garden, but you do not want to give up on the beautiful green? With the integrated irrigation control you will safe a lot of time. At the same time, you can tailor the system to your plant’s water requirements.
Goodbye electro smog!Do you find the effects of electric radiation on our body worrying? By disconnecting electrical sock-ets, in bedrooms and children’s rooms in particular, you can reduce radiation significantly.
For special momentsDo you like being pampered and enjoy the simplicity of the moment? Create special moments in your life and underline these with the right lightning.
Unlimited listening pleasureAre you a music lover and enthralled by the world of notes and sounds? Enjoy your favourite music at any time, no matter if you are cooking, having lunch on the patio or relaxing on the sofa.
10
Hotel and commercial construction myGEKKO is not only suitable for the realisation of private homes, but also for complex and extensive building concepts such as office buildings, hotel facilities, hospital or nursing homes.
With myGEKKO there are no limits to your projects!
myGEKKO Touch
Lights, blinds, ...
Accessories
System expansion
Flexible cablinge.g. IO Modules
Customised visualisation
LAN internet
myGEKKO networkIndividual systems are combined to form a homoge-neous myGEKKO network. Settings and operation of the system can be performed locally on each display or easily via a personal computer.
By linking several building units or buildings you can create maximum information transparency and use synergies.
11
myGEKKO in use
Trade buildings
Craft buildings
Gastronomy
Hotels
Public buildings
Office buildings
Boutique Kraler Franz ASA-ProData
Hotel Hohenwart
Hospital BrixenArch. Pardeller Putzer Scherer
Giacomuzzi KG - Solarteur®
Bar/Pizzeria Sylvanerhof in Raas
12
Total Building SolutionMulti-functional, user-friendly and expandable
Intelligent rooms
Savings of up to 50 % of the useful energy through presence-dependent automatic light, constant light control, automatic solar control and slat adjustment.
Video surveillance and recording when an event is triggered, e.g. when an alarm is trig-gered.
Visualisation of the fire detection and alarm system.
Multimedia: Music control for transmitting the sound to entrance, waiting and recreational areas as well as media control for seminar and meeting rooms.
Energy savings of up to 10 % on heating and cooling energy through time programmes for op-erating modes, presence switch, window monitor-ing, free night cooling, solar compensation.
Automation
Take advantage of the energetic and functional synergies by integrating all concepts into a coherent whole!
Load optimisation via intelligent linkage of HVAC systems, individual room control, light and sun management.
Access permissions for multiple groups (em-ployees, cleaning staff, etc.) according to time and zones.
13
Recording of working time for payroll accounting, via access control.
Parking management with integrated group and rights management.
Workplace management: Employees can adapt light, roller shutters and heating to their individual needs and presence.
The central control and monitoring of the entire system allows quick identification of optimisation potentials, energy consumption control and qual-ity improvement of the building’s operation.
Storage of all the information, which are collect-ed, analysed and visualised centrally.
Recording of energy consumption along with calculation of the corresponding costs.
Comparison of energy consumption with simi-lar objects.
Remote alarming in the event of alarms or faults.
Management Personnel administration
Take advantage of the energetic and functional synergies by integrating all concepts into a coherent whole!
myGEKKO Touch
15
myGEKKO Slide
SVGA Touch display 8.4”Latest capacitive touch technology
Audio interface with speakers
9 buttons - quick operation - and integrated slide function
Warning / status LEDs and built-in alarm buzzer
LAN and USB interface
Very low power consumption
Brilliant optics through glass front
myGEKKO Touch
Great success at the red dot design awardThe myGEKKO Slide with brilliant design and fascination technology was able to convince in the product design 2011 category!
16
Features
Description Group Article €
myGEKKO Touch - Slide 8.4" 10 GKPES-UWH41
myGEKKO Points 11 GKIOM-LIC21
myGEKKO Slide
myGEKKO Touch
Technical data
Elegant designThe white glass surface provides an elegant and unobtru-sive mounting on the wall and emphasises the timeless-ness and longevity of myGEKKO. The vertical front guar-antees an optimal view and quick operation function. Multi-Touch The display and the quick operation keys are equipped with capacity touch technology. This offers new possibili-ties for interaction with myGEKKO. Thus, operation gets more intuitive and easier. Sliding and scrolling are just some of the new touch technology’s areas of application.
Buttons - quick operation - keys with slide function9 quick operation keys, which on request can be dis-played in green, red or orange, are hidden underneath the white glass front. The luminosity as well as the func-tions of the quick operation keys can be assigned indi-
vidually. Quick access of the video camera, activation of the alarm system or display of energy values is possible with a single touch.
Warning and status indication via LEDsThe LEDs can also be used as warning indicators. Con-sequently, occurring alarms such as increased energy consumption, excessive temperature, lack of production of the PV system can be indicated by a flashing red LED. Not only alarms, but also general information can be dis-play with the LEDs, for example, if all windows are closed, one LED will light up green and if one window contact signals an open window, the LED will switch to orange. Hence, the resident can quickly check the windows’ status before leaving the house, and hence be reassured. This display can be defined for any function / information in the house.
Power supply 10-32 VDC
Current consumption 650mA@24DC
Display size 8.4”
Operation Capacitive touch screen 9 LED fields with quick operation and warning function
Screen resolution 800 x 600 pixels
Colour resolution 16 million
Audio interface 2x built-in speakers
Interfaces 1 x Lan1 x Line-Out1 x RS232 1 x RS232 / RS485 1 x USB
Mounting Cavity wall Flush mounting with boxart. ACC-BOX01
Dimensions W x H x D 220 x 320 x 20 mm
17
Technical data
Power supply 24 VDC
Display size 5.7"
Operation Touch interface - Resistive touch
Screen resolution 640 x 480 pixels
Interfaces 1 x Lan1 x RS485 1 x USB
Degree of protection IP 65 (front panel)
Mounting Front panel mounting
Dimensions W x H x D 200 x 141 x 42 mm
Available software myGEKKO living (excl. VNC)
Description Group Article €
myGEKKO Compact 5.7" 10 GKPES-COM01
myGEKKO Points 11 GKIOM-LIC21
myGEKKO Compact
myGEKKO Touch
Flush mounting: The flush mounted box is screwed to the mounting frame, then the thread screws are bolted to the display which is hooked into the mounting frame. The distance to the box can be varied by adjusting the thread screws on the screen. Never-theless, care should be taken during assembly in order that the box is mounted flush to the final rendering.
Cavity wall installation: The mounting frame is screwed to the plaster or wooden wall. The space required for the display is cut or drilled out. Sub-sequently, the display is hooked into the mounting frame by the use of the thread screws. The flush mounting frame is not required when mounting to a cavity wall.
The myGEKKO Compact is used preferably in technical equip-ment rooms for mounting in control cabinets. The high IP protection on the front panel protects the screen from damage and spills.
Ideal mounting height:The mounting height should be chosen according to the user’s eye level.
Description Group Article €
Flush mounting box V.1 (Gewiss GW48672) 12 ACC-BOX01
Mounting frame for box V.1 12 ACC-RB01
Technical data
Mounting Flush mounting
Dimensions W x H x D 169 x 308 x 70 mm
ACC-BOX01
Mounting box
Flush-mounting box Used for flush mounting of the myGEKKO Slide
myGEKKO Apps
19
Software
myGEKKO PointTo unlock the software you need myGEKKO Points for any connection on the I/O modules and for any system extension. Information about how many myGEKKO points are required for the individual modules or extensions can be found in the detailed technical product description (starting on p. 25).
Pre-installed softwareThe software (App) is already installed on the myGEKKO Touch. Configuration settings and commissioning can be made di-rectly via the display. The landlord can personalise and adjust the user interface at any time.
Workplace visualisation
Living areas
Home Screen
Flexible for the futurePlan your house with myGEKKO not only for today, but opt for a system, which can be continuously adapted to new require-ments.The software can be updated without charge via USB flash drive. Furthermore, you can expand your system with new func-tions (e.g. SMS, music, web cameras, …) at any time. You need the appropriate myGEKKO Points for the expansion of the sys-tem. We reserve the right to charge a service fee for activation.
myGEKKO networkA specific amount of lights, roller shutters, individual room controls, … can be realised with any myGEKKO. Large projects are realised by linking several myGEKKOs. The software is designed in order that the linked myGEKKOs can be operated and managed as a homogenous unit.
Plug&PlaymyGEKKO is plug & play, just connect the system extension and it will work immediately. The necessary adjustments are already included in the software.
Several variationsFor customers and partners there are different software ver-sions available for download (e.g. living, emax, …) which can be uploaded to the myGEKKO touch free of charge at any time. You can learn more about our software versions on our websitewww.my-gekko.com or from your myGEKKO contact partner.
myGEKKO Apps
20
64 Lighting circles
32 Shutters/blinds controls
8 Ventilation controls
4 Climate modules
Connection of 32 electrical devices or circuits
32 Single-room controls (heating/conditioning)
Boiler demand / boiler monitoring
Boiler-/buffer control
Distribution pump and circulation pump control
16 Controls of heating/conditioning circuits
16 Controls circuits/pump circuits
Solar control
Alarm system for 2 zones with 32 detector inputs
64 Alarm messages and logic combinations
16 Energy counters with daily, monthly and total sum display
8 freely definable trend records
Load rejection control for 16 load groups
Access control for 8 doors und 72 users
Display of 8 customizable webcams
Music-Multiroom for 8 zones
40 Customizable clocks
32 Customizable scenarios
myGEKKOStandard software for the realisation of home and building au-tomation concepts for private residential houses, but also for business projects like hotels, commercial buildings, offices, etc.
myGEKKOThe software was designed specifically for energy optimisation and temperature recording of hotels.
The most important functions in addition to energy optimisa-tion are:
Temperature recording according to HACCP concept for monitoring of cold storage cells Fill level monitoring of fuel tanks Optimisation of heat pumps Control of CHPs Consumption metering of oil, gas or heat, etc.
Current execution
living
emax
myGEKKO Apps
21
Access control for 8 doors and 200 users
8 Controls of heating/conditioning circuits
No control circuits/pump circuits
Remaining functions idem myGEKKO living
Configuration and commissioning controlled directly via the myGEKKO display
Back up and restore of the configuration via USB flash drive
Softwareupdate via USB flash drive
Language selection (German, Italian, English, Dutch, Spanisch, Franch, Czech)Central management with remote display of multiple myGEKKO's
For the realisation of comprehensive systems and business projects you can use different apps in the network. All apps are compatible with each other.
Remote access via VNC or via the myGEKKO Web-App
myGEKKOSoftware for the realisation of comprehensive access control solutions for office and industry.
Integrated in all apps!As manifold the myGEKKO Apps are, they all have in common the following.
Current execution
off ice
myGEKKO Apps
64 Lighting circles
64 Shutters/blinds controls
8 Ventilation controls (of that)
4 Climate modules
Connection of 64 electrical devices or circuits
64 Single-room controls (heating/conditioning)
16 Controls of heating/conditioning circuits
64 Alarm messages and logic combinations
8 Energy counters with daily, monthly and total sum display
Access control for 8 doors und 72 users
Display of 8 customizable webcams
Music-Multiroom for 8 zones
40 Customizable clocks
32 Customizable scenarios
8 freely definable trend records
myGEKKOSoftware for the realisation of extensive hotel projects.
rooms
NEW!
NEW!
22
myGEKKO everywhere
NEW!myGEKKO Web-App
myGEKKO Touch
The myGEKKO Web-App is supplied with the myGEKKO Touch and immediately available after entering the necessary security setting. The Web-App is available for all (!) myGEKKO models.
The Web-App is compatible with all Android phones and pads, iPhone and iPads.
All systems can be monitored and controlled directly. Adjust-ments on the myGEKKO Touch (e.g. adding of cameras) are transferred directly to the Web-App.
Remote control via VNC
With the use of VNC software the myGEKKO screen content can be visualised on a local computer / device. As a result, the myGEKKO can be operated as if one was sitting directly in front of it. VNC is platform independent.
23
myGEKKO Viewer
With the myGEKKO Viewer you can control your myGEKKO comfortably via PC. The software is compatible with Win-dows.
After entering their user data employees can operate their work station individually. At their wish, they can adapt the heating, roller shutters, etc. according to their needs.
We also create bespoke visualisations. Tell us your require-ments and ideas and we will develop an individualised visuali-sation for you.
myGEKKO Viewer
Work station visualisation
Customised visualisation
Description Group Article €
myGEKKO Viewer - Private (1 workplace) 13 GKRS0-PES01
myGEKKO Viewer - Business application (1 workplace) 13 GKRS0-BUS01
Additional work station license 13 GKRS0-BUS11
Customised visualisation 13 on request
myGEKKO Viewer
Flexible installationmyGEKKO RIO Modules .................p. 25Wago .................................................p. 36Beckhoff ...........................................p. 37Phoenix Contact ..............................p. 37 Enocean ............................................p. 38BACnet ..............................................p. 38KNX ....................................................p. 39
25
RIO modules
RIO-29 RIO-16
Everything with just 2 modules!
myGEKKO IOs
Lighting control
Roller shutter/External blinds control
Ventilation control
Connection of electrical devices
Individual room control (heating/cooling)
Boiler demand/boiler monitoring
Boiler/buffer adjustment
Distributor and circulation pump control
Heating/cooling circuit adjustment
Solar control
Alarm system
Logics and alarms of any kind
Energy meters with daily, monthly and sum display
Load shedding control
Access control
Integration of web cameras
Music multi-room
Customisable time clocks
Customisable scenarios
Highly integrated combination modules
Simple bus cabling
Very quick installation Installation in civil standard distribution cabinets
LED status indicators
Man / Auto switch
26
RIO modules
The ultra-compact combination module RIO-29 is a true all-rounder. From analog and digital IOs to various interfaces like M-Bus, RS232, RS485 – everything is united in the RIO-29. The RIO-29 module furthermore serves as bus coupler.
Topology:Up to 4 bus couplers can be connected to a myGEKKO Touch. (Bus line 1 to 4).Each bus can consist of a maximum of 16 modules and contain up to 6 RIO-29.
Technical data
myGEKKO module RIO-29
Description Group Article €
myGEKKO module RIO-29, 8AI, 2AO, 8DI 24VDC, 8DO 24VDC 14 RIO-29
Connection via myGEKKO points
RS485 max. 32 (with M-Bus)
Bus line, example single unit Topology, example �oor distribution
RS485
RS485
M1 M2 M15 M16
Information:- The 1st module for each bus line must always be a RIO-29- Maximum modules per bus line = 16- Maximum RIO-29 modules per bus line = 6
Maximum of 4 bus lines per myGEKKO Touch
Bus line: Ground �oor
Bus line: 1st �oor
Rio-29 Rio-29 Rio-16 Rio-16 M1 M16Rio-29 Rio-16
M16 Rio-16M1 Rio-29
Digital inputs 8 inputs, 24 VDC galvanically isolated, status display and labelling field
Digital outputs 8 outputs, 24VDC 500 mA with status display and labelling field
Analog inputs 8 inputs 0-10V, 0-20 mA, PT1000
Analog outputs 2 outputs, 0-10V 0-20 mA
Interfaces 1 additional interface RS485 1 additional interface RS485/RS2321 MBUS interface for 3 devices
Switching Manual/Auto switching with status display
Protection Odd-/Even lock protection
Features - LED function On/Off- function as bus coupler- address selector
Supply voltage 24VDC - 25% / +30%
Current consumption (internal) Max. 250 mA
Dimensions W x H x D 160 x 63 x 110 mm
myGEKKO IOs
RIO-29
27
Bus line, example single unit Topology, example �oor distribution
RS485
RS485
M1 M2 M15 M16
Information:- The 1st module for each bus line must always be a RIO-29- Maximum modules per bus line = 16- Maximum RIO-29 modules per bus line = 6
Maximum of 4 bus lines per myGEKKO Touch
Bus line: Ground �oor
Bus line: 1st �oor
Rio-29 Rio-29 Rio-16 Rio-16 M1 M16Rio-29 Rio-16
M16 Rio-16M1 Rio-29
The ultra compact combination module RIO-16 is a true power module. With its 8 digital outputs with 230 VAC 16 A almost all loads in the house can be switched. The eight 24 VDC inputs serve to connect sensors, such as push-buttons or motion sensors.
Odd-/Even lock The odd/even lock protection is mainly used for the con-nection of venetian blinds motors. Via the protection the outputs 1-2, 3-4, 5-6 and 7-8 are mutually locked, in order that a simultaneous activation of the to outputs is avoided. The odd/even lock protection is also active in manual mode. Protection of the motors is hence guaranteed.
Technical data
myGEKKO module RIO-16
Description Group Article €
myGEKKO module RIO-16, 8DI 24VDC, 8DO 230V 16A 14 RIO-16
Connection via myGEKKO points
module RIO-29
max. 16
Digital inputs 8 inputs, 24 VDC galvanically isolated, status display and labelling field
Digital outputs 8 outputs, 230 VAC 16 A with status display and labelling field
Switching Manual/Auto switching with status display
Protection Odd-/Even lock protection
Features - LED function On/Off- address selector
Supply voltage 24VDC -25% / +30%
Current consumption Max. 300mA
Dimensions W x H x D 160 x 63 x 110 mm
myGEKKO IOs
RIO-16
28
Connection examples
RIO-29Room sensors Valves
Brightness sensor
Lamp
Push-button
0-10V dimmer
Temperature and humidity sensor
Heating pump
Malfunction ventilation and heating
Living room ventilation
Weather station M-BusSMS
...
Connection 8 room sensor PT1000 Direct connection control valves 24VDC
Connection 0-10V dimmer Connection brightness sensor 0-10V
Connection flow/outdoor sensor PT1000 Requirement heating/ventilation through 0-10V Connection heating pump and mixer motors
Connection M-Bus energy meter Connection weather station, SMS module, …
Individual room control
Dimming the light
Heating and ventilation control
M-Bus / external systems
myGEKKO IOs
8 x DO 24VDC, 500 mA8 X DI 24VDC8 X AI 0-10V, 0-20 mA, PT10002 x AO 0-10V, 0-20 mA
29
RIO-16Lamps
Push-button
Sockets Fans
Push-button
Siren Door-opener
Bell Irrigation
Malfunctions
Connection 8 light circles Connection 8 push-button
Connection 8 sockets / fans
Connection 4 blind motors Connection 8 push-buttons
Connection various devices Connection fault messages
Switching the light
Sockets/ Ventilation
Shutters / blinds
Miscellaneous
myGEKKO IOs
8 x DI 24VDC8 x DO 230VAC / 16A
Roller shutters / Awning
Push-button
30
Outputs 8
Output type PWM outputs
Switching Manual/Auto switching with status display
Protection Odd-/Even lock protection Locking can be activated pairwise
Features - LED function On/Off- LED status display
Output current 0,5A short-circuit protected
Power supply Separate feeding, galv. non-insulated
On module RIO-29
Digital outputs 24VDC/230 VACDigital outputs 24VDC
Relay outputs 230VAC
The digital outputs are primarily used for switching 24VDC loads. For switching 230/400V loads additional relays or power contactors (see accessories) may be used.
Hint: Direct connection of heating valve drives 24VDC per output (see accessories)
The relay outputs are used for switching loads like lights, venetian blinds and various devices. The floating 230V/16A contacts allow a direct connection of the loads.
Technical data
Technical data
Outputs 8
Output type relay
Voltage power contacts 230 VAC
Switching Manual/Auto switching with status display
Protection Odd-/Even lock protection Locking can be activated pairwise
Features - LED function On/Off- LED status display
Switching capacity 16A / 230VAC per output
Contact ratings load: 12 A, 250V~, cosφ=1TV8 2500 W, 230V~, halogen lamps1000 W, 250V~, incandescent lamps3000 W, 250V~, incandescent lamps1500 VA, fluorescent tubes 163 µF
Switching cycles3x105
25x103
>104 2,3x105 3,6x104
104
On module RIO-16
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO AI-1 .. AI-4, AO
-1Analog-IO
AI-5 .. AI-8, AO-2
Digital Outputs DO
-1 .. DO-8
848586878889
80818283
90
79 24V DC-EXT*
* The digital outputs D01 … 8 must be supplied externally
Man/AutoLED On/Off
24V DC-EXT*
0V DC-EXT*0V DC-EXT*
DO1DO2DO3DO4DO5DO6DO7DO8
0,2 ..1,50,2 ..1,5
DO-1..8: 24VDC / 500m
A max.. .
. So
lid-S
tate
-Out
puts
. . .
222324252627282930
21
101
102
103
104
105
106
113
114
115
116
117
118
107
108
109
110
111
112
5678
ww
w.m
y-gekko.com
DO
-1D
O-2
DO
-5D
O-3
DO
-4D
O-7
DO
-8D
O-6
NC
NC
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
my-G
EKKO RIO
-16
101
102
103
104
105
106
113
114
115
116
117
118
107
108
109
110
111
112
L
DO1
L
DO2
L
DO3
myGEKKO IOs
X7
X5, X6, X7
31
Analog outputs 0-10 VAnalog outputs 0-20 mA
Digital inputs 24DC
Analog outputs 0-10V/0-20mA
The digital inputs are used for the connection of push-buttons, motion sensors and any additional floating contacts.
The analog outputs are used for controlling dimmable ballasts for lighting as well as heating or ventilation requirements.
Technical data
Technical data
Inputs 8
Input type Optically separated / opto-couplers
Isolation voltage 400V
Switch point On >9VDC
Switch point Off <5VDC
Current consumption / Input @ 10V 2 mA
Current consumption / Input @ 18V 3.8 mA
Current consumption / Input @ 24V 5.5 mA
Current consumption / Input @ 28V 6.2 mA
Features - LED function On/Off- LED status display
On module RIO-29 and RIO-16
Outputs 2
UO-X Output 0-10 V
UO-X 12-bit resolution
IO-X Output 0-20 mA
IO-X 12-bit resolution
On module RIO 29
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO AI-1 .. AI-4, AO
-1Analog-IO
AI-5 .. AI-8, AO-2
Digital Outputs DO
-1 .. DO-8
Manual
Auto
* External ground connector for isolated digital inputs
LED On/Off
0V DC-EXT *0V DC-EXT *
DI1DI2DI3DI4DI5DI6DI7DI8
0,2 ..1,50,2 ..1,5
222324252627282930
21
DI-1
.. D
I-8: 1
2-24
VDC/
5mA@
24V
Optocoupler
Inputs
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO
AI-1 .. A
I-4, AO
-1A
nalog-IO A
I-5 .. AI-8, A
O-2
Digital O
utputs DO
-1 .. DO
-8
Gnd
UI-3II-3
TI-3
AI-7
UI-1II-1
TI-1Gnd
AI-5
UI-2II-2
TI-2Gnd
AI-6
UI-4II-4
TI-4Gnd
AI-8
UO-1IO-1GND
AO-2
U: Voltage 0..10V D
CI: Current 0..20m
A
0,25 ..0,50,14 ..0,5
Gnd
UI-3II-3
TI-3
AI-3
UI-1II-1
TI-1Gnd
AI-1
UI-2II-2
TI-2Gnd
AI-2
UI-4II-4
TI-4Gnd
AI-4
UO-1IO-1GND
AO-1
U: Voltage 0..10V D
CI: Current 0..20m
A
11
4748
69
49
1
6768
myGEKKO IOs
X7 X4
X5, X6X5, X6, X7
32
Analog inputs 0-10V/0-20mA/PT1000
Analog inputs 0-10V
Analog inputs 0-20mA
The analog inputs 0-10V serve to connect sensors and devices with 0-10V output (weather station, brightness sensor, …)
The analog inputs 0-20mA serve to connect sensors and devices with 0-20mA output (humidity sensor, level measure-ment, …)
Analog inputs PT1000
The analog inputs PT1000 serve to connect PT1000 sensors for measuring room temperatures, heating and ventilation systems, …
Hint: Use of temperature sensors in rooms (see accessories)
Technical dataInputs 8
UI-x input range 0-10V voltage input
UI-x measuring accuracy 16-bit resolution
UI-x input resistance 39 kOhm
Il-x input range 0-20mA current input, 12 Bit
Il-x measuring accuracy 12-bit resolution
TI-x input range PT1000 from -50 to 250°C
TI-x measuring accuracy 0,1 degrees
On module RIO-29
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO
AI-1 .. A
I-4, AO
-1A
nalog-IO A
I-5 .. AI-8, A
O-2
Digital O
utputs DO
-1 .. DO
-8
Gnd
UI-3II-3
TI-3
AI-7
UI-1II-1
TI-1Gnd
AI-5
UI-2II-2
TI-2Gnd
AI-6
UI-4II-4
TI-4Gnd
AI-8
UO-1IO-1GND
AO-2
I: Current 0..20mA
0,25 ..0,50,14 ..0,5
Gnd
UI-3II-3
TI-3
AI-3
UI-1II-1
TI-1Gnd
AI-1
UI-2II-2
TI-2Gnd
AI-2
UI-4II-4
TI-4Gnd
AI-4
UO-1IO-1GND
AO-1
U: Voltage 0..10V D
C
31
11
11
11
11
3435
3839
4243
46
52
54
56
58
60
62
64
66
=
=
=
=
=
=
=
=
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO
AI-1 .. A
I-4, AO
-1A
nalog-IO A
I-5 .. AI-8, A
O-2
Digital O
utputs DO
-1 .. DO
-8
Gnd
UI-3II-3
TI-3
AI-7
UI-1II-1
TI-1Gnd
AI-5
UI-2II-2
TI-2Gnd
AI-6
UI-4II-4
TI-4Gnd
AI-8
UO-1IO-1GND
AO-2
0,25 ..0,50,14 ..0,5
T: Temp. Sensor PT-1000
Temp. Range -50..+250 oC
Gnd
UI-3II-3
TI-3
AI-3
UI-1II-1
TI-1Gnd
AI-1
UI-2II-2
TI-2Gnd
AI-2
UI-4II-4
TI-4Gnd
AI-4
UO-1IO-1GND
AO-1
T: Temp. Sensor PT-1000
Temp. Range -50..+250 oC
11
11
11
11
3334
3738
4142
4546
5354
5758
6162
6566
myGEKKO IOs
X5, X6
X5, X6
33
RS232/RS485 interface
M-Bus interface
The RS232/RS485 interfaces are used for the connection of system extensions, such as weather station, SMS module, …
The M-Bus interface is used for the direct connection of M-Bus devices, such as energy, water and electricity meters.
Technical data
Technical data
Number of interfaces 2
Interface type RS-485 (Aux 1)RS-485 or RS-232 (Aux 2)
Baud rate 1200, 2400, 4800, 9600, 19'200 and 38'400 baud
Parity Adjustable
On module RIO-29
Number of Interfaces 1
Interface type M-Bus
Max. number of M-Bus slaves 3
Power supply +/- 30VDC max. 60mA
Baud rate 1.200, 2.400 baud
On module RIO-29
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Digital O
utputs DO
-1 .. DO
-8
AUX1
: RS4
85AU
X2: R
S485
/RS2
32
9101112
1920
15161718
RxTx+
RxTx-
+24VDC
GND
RxTx+RxTx-
+24VDC
GNDRxDTxD
848586878889
80818283
31
90
79
91011121314
1920
15161718
222324252627282930
21
32333435363738
40394142434445464748
69
49
5152535455565758
6059
6162636465666768
my-G
EKKO RIO
-29w
ww
.my-gekko.com
Analog-IO
AI-1 .. A
I-4, AO
-1A
nalog-IO A
I-5 .. AI-8, A
O-2
Digital O
utputs DO
-1 .. DO
-8
M-Bus +M-Bus -
1314
myGEKKO IOs
X3
X3
34
The PWM inputs translate the PWM outputs (PWM signal) of the RIO-29 into a 0-10V signal. The module can only be oper-ated on a RIO-29.
Technical data
myGEKKO analog extender AX-8
Description Group Article €
Analog extender AX-8 - 4 x 0-10V 14 RIO-AX8
Connection via myGEKKO points
RIO 29 -
Bus line with analogue extentions 4 x 0-10V
RS485
RS485
M1 M2 M3 M16Rio-29 Rio-29 AX-8 M4 AX-8 Rio-16
Digital PWM inputs 4 inputs, 24VDC galvanically isolated
Analog outputs 4 outputs, 0-10V
Supply voltage 24VDC - 25% / +30%
Degree of protection IP 20
Current consumption (internal) Max. 50 mA
Dimensions W x H x D 54 x 110 x 62 mm
AX-8
Digital PWM inputs X100
Analog outputs X101
Technical data
Technical data
Input type PWM inputs, only from Rio 29
Maximum input voltage 24VDC +30%
Input frequency 500 Hz
UO - X Output 0-10 V
UO - X Max. load 10mA (Short-circuit-proof )
NEW!myGEKKO IOs
35
HTML / httpJAVA ScriptAjaxJSONWeb
open for the future...
IO modules
IO modules
Bus systemKNX
KNXBACnet
IO modules
IO modules
Burglary/Security system
Bussystem
Alarm signalling protocol fire alarm system
Multi-room solutions
Access solutions
Battery-free wireless technology
Heat, electricity and water meter
Bacnet
Dali bus lighting control - RGB-LED
All listed brands and logos are registered trademarks of their respective owners.
Regarding the installation itself myGEKKO offers all possible interfaces to various installation and media bus systems. Whether via bus, 2-wire technology, wireless or traditional – myGEKKO is familiar with all systems and able to combine them as desired! The wiring can thus be flexibly adapted to the requirements of the building and the user.
Thanks to the flexible installation concept the user can benefit from all technical possibilities and innovations in the future. Despite having opted for a certain wiring method, the user is not bound.
Open for all systems
Flexible installation
36
Technical data
see product catalogue myGEKKO & WAGO
The interface serves as linkage for the digital light control bus DALI to myGEKKO.
The WAGO IO system of the 750 series can be used as an alter-native and in combination with the myGEKKO RIOs.
Interface
Interface on the Wago IO system
Wago
Connection via myGEKKO points
WAGO IO 1 per DALI data point
Connection via myGEKKO points
RS485 acc. to WAGO IO modules
Description Group Article €
Interface DALI 12 on request
Description Group Article €
Interface on the Wago IO system 12 on request
For technical data see product catalogue myGEKKO & WAGO
DALI interface via WAGO I/O System.
WAGO basic equipment
RS485
Combination possibility
myGEKKO Rio
Wago
Wago
Flexible installation
37
Beckhoff modules can be used as an alternative and in combi-nation with the myGEKKO RIO modules.
Phoenix Contact modules can be used as an alternative and in combination with the myGEKKO RIO.
Interface on Beckhoff
Interface on the Phoenix Contact
Beckhoff
Phoenix Contact
Connection via myGEKKO points
RS485 acc. to IO Module
Connection via myGEKKO points
RS485 acc. to IO Module
Description Group Article €
Interface on Beckhoff 12 on request
Description Group Article €
Interface on the Phoenix Contact 12 on request
Connection Beckho� coupler
RS485
Combination possibility Beckho� & KNX
Beckho�
Beckho�
KNX
Connection Phoenix Contact coupler Combination possibility Phoenix Contact & enocean
Phoenix Contact
Phoenix Contact
enoceanRS485
Technical data
Technical data
Combatible coupler BK7300
Combatible modules KL2809 DOKL1809 DIKL4438 AOKL9188 24V terminalKL9189 0V terminalKL3468 AIKL3448 AIKL3228 AI RTD
Combatible coupler ILMod BK DI8 DO4-PAC
Combatible module IB IL 24 DI IB IL 24 DO IB IL TEMP RTD
Flexible installation
38
Enocean
BACnet
RS485
Enocean interface Combination possibility: myGEKKO Rio & Enocean
Enocean actuator
Enocean sensor
Sensor technology to Enocean
Actuator toRIO modules
Connection to BACnet
LAN
BACnet / IP
LAN
The Enocean interface allows the receiving and sending of wireless telegrams of all wireless transmitters, which corre-spond to the standard of the Enocean protocol.
Serves to link myGEKKO to BacNet building control systems. Values can be read out and described via BacNET IP.
Technical dataInput voltage range 12-30 VAC/DC
Rated current 0,5A
Installation Surface mounted
Dimensions W x H x D 80 x 80 x 25 mm
Connection via myGEKKO points
RS485 1 per Enocean data point
Interface on the Enocean
Description Group Article €
Interface on the Enocean 12 ACC-ENO01
NEW!
Flexible installation
39
KNXCombination possibilities myGEKKO & KNX
RS232
RS484
Sensor technology to KNX
Actuator to Rio, Wago, Beckho� ...
Alarm signalling system
Enocean
KNX
KNX connected to external systems
Technical dataInput voltage range +5 VDC
EIB bus coupler Integrated
Included in the delivery power supply
Dimensions W x H x D 92 x 26 x 67 mm
KNX® Interface
Connection via myGEKKO points
RS232 1 per group address
Description Group Article €
KNX Schnittstelle 12 ACC-KNX01
The KNX/EIB interface is a serial interface for the EIB system with integrated 2-wire bus coupler. KNX/EIB devices can be connected to the myGEKKO by means of this interface.
Modbus TCP / IPConnection to Modbus TCP/IP
LAN
Modbus TCP / IP
LAN
Serves to link myGEKKO to TCP/IP building control systems. Values can be read out and described via TCP/IP.
NEW!
Flexible installation
myGEKKO Extensions
41
Expand myGEKKO with ...
Multiroom Music
Video Weather station
SMS
... and much more!
myGEKKO Extensions
42
Access Reader MIFAREServes as non-contact access detection via Mifare cards.
Access Reader FingerprintServes as access control via fingerprint.
Pin assignment:Pin 2: +9-12VDCPin 3: GNDPin 6: RS485 APin 7: RS485 B
Technical data
Technical data
Input voltage range 9-12 VDC
Function range 70 mm
Colour black
Chip/Reading standard Mifare 13,56 Mhz
Mounting Flush-mounted box with device screws spacing 60 mm (Example Kaiser 1055-04)
Door status 2 LEDs to indicate the door status
Current consumption 110 mA
Dimensions W x H x D 108 x 86 x 12 mm
Input voltage range 8-24 VDC
Biometric characteristics FAR 1 x 10-6 / FRR 1,4 x 10-2
Mounting Surface-mounted / Flush-mounted box 0 55 mm
Degree of protection IP 44 - Surface-mounted model 2.0IP 33/44/64 Flush-mounted model 2.0 (depending on switch ranges)
Operating temperature -25° - +75° C - Surface-mounted model 2.0 -30° - +70° C - Flush-mounted model 2.0
Dimensions W x H x D 45 x 81,6 x 60,3 mm Surface-mounted model 2.050,4 x 50,4 x 30,1 mm Flush-mounted model 2.0
Access
Description Group Article €
Access Reader Fingerprint - Flush-mounted model 2.0 12 ACC-ACC50
Access Reader Fingerprint - Surface-mounted model 2.0 - silver gray 12 ACC-ACC55
Description Group Article €
Assecc Reader 12 ACC-ACC01
Mifare Card 12 QU000401
Mifare Keyring 12 QU000402
Connection via myGEKKO points
RS485 1
Connection via myGEKKO points
RS485 1
max. 8 Reader ....
Access Mifare and Fingerprint
RS 485
Mifare or FingerprintACC-ACC01 / ACC-ACC55
myGEKKO Extensions
Surface-mounted 2.0 Flush-mounted 2.0
43
Serves to send and receive short messages for remote control or remote alert.
Technical data
Input voltage range 8 - 30 VDC
External antenna Yes
Weight 130 g
Included in the delivery Power adapter
Dimensions W x H x D 74 x 65 x 33 mm
SMS
Description Group Article €
GSM-SMS module RS232 with external antenna 12 ACC-GSM01
Connection via myGEKKO points
RS232 1
GSM-SMS module RS232 with external antenna
GSM-SMS module RS232ACC-GSM01
GSM-module RS232
RS 232
GSM-SMS module RS232ACC-GSM01
GSM-module RS232 - Connection via Rio 29
RS485RS232
myGEKKO Extensions
44
LAN MP3-Player Stereo Line Output
Serves to play MP3 streams from the network.
LAN MP3-Player 2x25W RMS Dient zum Abspielen von MP3 Streams aus dem Netzwerk.
Technical data
Technical data
Supported audio format MP3 up to 320 kbps with fixed or variable bit rate
Network connection RJ45 LAN 10/100Mbit TCP/IP
Audio connector Stereo RCA, 3.5 mm jack plug (4Vpp max)
input voltage range 9 to 30VDC / 12 to 24VAC (power adapter icluded in the delivery)
Dimensions W x H x D 108 x 38 x 78,7 mm
Supported audio format MP3 up to 320 kbps with fixed or variable bit rate
Network connection RJ45 LAN 10/100Mbit TCP/IP
Audio connector - Stereo RCA, 3.5 mm jack plug (4Vpp max), - 2x25W (RMS@8ohm) speaker connector (short circuit overload protection) - S/PDIF out (optical)
input voltage range 9 bis 30VDC / 12 bis 24VAC (power adapter icluded in the delivery)
Dimensions W x H x D 108 x 38 x 78,7 mm
Multiroom Music
Connection via myGEKKO points
Lan/Ethernet 1
Connection via myGEKKO points
Lan/Ethernet 1
Description Group Article €
LAN MP3 Player Stereo Line Output 12 ACC-LPL01
Description Group Article €
LAN MP3 Player 2x25W RMS 12 ACC-LPL02
RS 232LAN
Ampli�er
ACC-AMR01
4 channel Audiomatix - Mono
ACC-LPL01
... max 8 zones
ACC-LPL02
Switch
ACC-LPL10
LAN-Player - Stereo
Ampli�er
Alternative
RS485
myGEKKO Extensions
45
LAN MP3 Instreamer
Converts analog and digital audio signals including CD players, tuners, etc. into high quality MP3 streams.
4 channel analog Audiomatrix Mono
Is used for source selection and volume control of analog audio sources. Usually, the audio matrix is installed ahead of a 4 channel power amplifier.
8 channel analog Audiomatrix stereo BOSE® ControlSpace™ ESP-88
The BOSE ControlSpace ESP-88 Engineered Sound Processor is a flexible, extendable high-end audio signal processor for individually developed sound applications.
8 channel extension cableBy using the extension cable two 4 channel audio matrices (ACC-AMR01) can be linked to an 8 channel audio matrix.
Technical data
Technical data
Technical data
Supported audio format MP3 up to 192 kBit with fixed or variable bit rate
Network connection RJ45 LAN 10/100Mbit TCP/IP
Audio connector - Stereo RCA, 3.5 mm jack plug(4Vpp max)- S/PDIF in (optical)
Input voltage range 9 bis 30VDC / 12 bis 24VAC (power adapter icluded in the delivery)
Dimensions W x H x D 108 x 38 x 78,7 mm
Input voltage range 12 VDC
Audio input connector 4xStereo Line IN RCA Cinch
Audio output connector 4xMono Line OUT RCA Cinch
Included in the delivery Power adapter
Dimensions W x H x D 170 x 105 x 50 mm
Input voltage range 85-264 VAC 50/60 Hz
Audio input connector 8xStereo Line IN / microphone
Audio-output connector 8xStereo Line OUT / microphone
Dimensions W x H x D 482 x 88 x 332 mm
Connection via myGEKKO points
Lan/Ethernet 1
Description Group Article €
LAN MP3 Instreamer 12 ACC-LPL10
Connection via myGEKKO points
RS232 max. 4
Connection via myGEKKO points
RS232 max. 8
Description Group Article €
4 channel analog Audiomatrix Mono 12 ACC-AMR01
8 channel extension cable 12 ACC-AMR02
Description Groupo Article €
8 channel analog Audiomatrix Stereo - Bose 12 on request
myGEKKO Extensions
46
Serves as the amplifier output stage of the audio system. Technical dataMounting 19” rack mount
Input voltage range 230 VAC
Audio input connector RCA Cinch
Audio output connector 8 ohm 4x60 watts4 ohm 4x80 watts
Dimensions W x H x D 483 x 440 x 360 mm
Serves as the amplifier output stage of the audio system.Technical data
Mounting 19” rack mount
Input voltage range 230 VAC
Power 4 x 120 watts @ 4 ohm
Audio output connector 100/70V or 4/8 ohm
Dimensions W x H x D 483 x 89 x 445 mm
Description Group Article €
4 channel power amplifier 4x120W 100/70V 12 ACC-END02
Description Group Article €
4 channel power amplifier 4x80W 12 ACC-END03
Description Group Article €
Interface to various audio systems 12 on request
4 channel power amplifier 4x80W
4 channel power amplifier 4x120W 100/70V
The interface serves to connect various multi-room systems, such as Revox, Bose, Nuvo, Sonos… to myGEKKO. The opera-tion of the audio system using traditional push-buttons, time-controlled music playback or action-based control of music is possible.
Technical specifications and details - on request
Interface to various audio systems
myGEKKO Extensions
47
light - rain - wind light - rain - wind - humidity
Used for recording weather data such as light, rain, wind, humidity. The data may, for example, be used for weather-dependent control of all devices.
Technical data
Operating voltage 24 VAC/DC ± 25%
Current consumption <= 150 mA (with heating <= 650 mA)
Ambient temperature -40 … +60 °C
Connection cable 10 m; LiYCY 16x 0.14mm², UV resistant max. 100 m (when supplied with 24V nominal)
Mode of mounting Niro clamping piece for wall or pole mount-ing
Weight max. 1,5 kg
Weather station
Connection via myGEKKO points
RS485 max. 8
Description Group Article €
Weather station light-rain-wind 12 AT000100
Weather station light-rain-wind-humidity 12 AT000101
Rain: Measurement value: yes/no Output: 0V=Rain, 10V=dry
Light: Measurement range: 1-100 kLux / 0-250 lux Output: 3 x 0-10V Direction: East, South, West, Twilight Accuracy: +-3% of measurement range
Wind: Measurement range: 0,5 - 40 m/s Output: 0-10V Accuracy: +-0,5 m/s or +-5% of measurement value
only AT000101
Humidity: Measurement range: 0-100% rel. humidity Output: 0-10V Accuracy: +-3% in range 10...90% rel. humidity
Measurement data
Weather station AT000100 / AT000101 Weather station AT000100 / AT000101(alternative connection possibility)
RS 485
IO-modules
AT000100AT000101
AT000100AT000101
myGEKKO Extensions
Model Thies
48
The weather station measures temperature, wind speed and brightness. It recognises precipitation.
Connection via myGEKKO points
RS485 max. 8
Description Group Article €
Weather station light-rain-wind RS485 - Elsner model 12 EL000100
Weather station EL000100
RS 485
IO-modules
EL000100
EL000100
Model Elsner
Operating voltage 24 VDC
Current consumption <= 105 mA
Ambient temperature -30 … +50 °C
Connection cable 10 m; LiYCY 16x 0.14mm², UV re-sistant max. 100 m (when supplied with 24V nominal)
Mode of mounting Flush-mounted, Niro clamping piece for wall or pole mounting
Colour White / translucent
Weight 160g
Dimensions W x H x D 96 x 77 x 118 mm
Technical data
Rain: Measurement value: yes/no
Light: Measurement range: 0 - 99.000 lux Direction: East, South, West Accuracy: +-35%
Wind: Measurement range: 0 - 70 m/s Accuracy +-25% at 0..15m/s
Temperature: Measurement range: -40...+80°C Accuracy: +-1.5°C
Measurement data
myGEKKO Extensions
NEW!
49
Serves to connect analog video cameras to myGEKKO for video recording and surveillance. E.g. to connect a video remote station to myGEKKO. (Information on request)
IP / Web cameras for video surveillance and connection to myGEKKO
Technical data
Connection network side LAN RJ45
Connection camera side Composite-Video-BNC-Input, NTSC/PAL with auto-sensing function
Supply Via Power over Ethernet (PoE)
Compression MJPEG, JPEG
Dimensions W x H x D 37 x 30,1 x 101 mm
Connection via myGEKKO points
LAN 1
Connection via myGEKKO points
LAN 1
Description Group Article €
Video converter analog / IP 1 Channel POE 12 ACC-IPS01
IP / Web cameras 12 on request
Video converter analog / IP 1 Channel POE
IP / Web cameras
Webcam
LANKoax RG59
Switch - PoE
Video converterACC-IPS01
IP/Webcam
Analogue camera
Recommended Switch: Netgearrecommended IP Webcam: Mobotix
Video
Technical specifications and details - on request
Rain: Measurement value: yes/no
Light: Measurement range: 0 - 99.000 lux Direction: East, South, West Accuracy: +-35%
Wind: Measurement range: 0 - 70 m/s Accuracy +-25% at 0..15m/s
Temperature: Measurement range: -40...+80°C Accuracy: +-1.5°C
myGEKKO Extensions
50
With the aid of the interface all M-bus compatible devices can be connected to myGEKKO.
Technical data - ACCMBU20 / ACCMBU60Standard loads per 1.5mA Max 20/60 terminals
Power supply External 12-24VDC or AC supply
Protection Overcurrent and short-circuit protection on the M-Bus
Display for Data transmission and system status
Mounting Rail or wall
Description Group Article €
M-Bus interface for 20 terminals 12 ACC-MBU20
M-Bus interface for 60 terminals 12 ACC-MBU60
M-Bus interface
RS 232M-BusRS 485
for max. 3 M-Bus meter
water meterenergy meter
M-Bus interfacefor more than 3 M-Bus meter
water meterenergy meter...
M-Bus
Connection via myGEKKO points
RS232 1 per M-BUS-address
myGEKKO Extensions
51
Control panel
RS 232
RS 485
Fire detection system
Control panelTelenot
Fire detection system Schrack Seconet
Alarm-Fire detection system
Technical specifications and details - on request
Serves to connect the fire detection system type Integral by Schrack Seconet AG to myGEKKO. The connection to myGEKKO is established via RS232 and does not need any additional hardware. The interface is used for status indication and to display malfunction messages and fire calls on the myGEKKO Touch.
Interface on fire detection system
Description Group Article €
Interface on fire detection system 12 on request
Connection via myGEKKO points
RS232 1 per data point
Serves to connect the alarm control panel type Complex 400 by Telenot Electronic GmbH and AVS alarm control panels to myGEKKO. The connection to myGEKKO is established via RS485 / RS232 and does not require any additional hardware. The interface is used to operate the control panel and to dis-play malfunction and alarm messages on the myGEKKO Touch.
Connection via myGEKKO points
RS485 /RS232
1 perdata point
Description Group Article €
Interface on alarm control panel 12 on request
Technical specifications and details - on request
Interface on alarm control panel
myGEKKO Extensions
Accessories
53
Sensor for measuring temperature in outdoor areas, cold stor-age cells and greenhouses, production and storage facilities.
Cable / Housing contact sensor PT1000For temperature measurement on pipes and curved surfaces directly with connection housing (TH000211) and terminal.
Cable sensor PT1000 For temperature measurement in designated mounting sleeves.
Room temperature sensor PT1000 Precise platinum temperature sensor in stainless steel hous-ing with connecting wires. Used as temperature sensor in the rooms.
Technical data
Technical data
Technical data
Technical data
Temperature range -35 ...100°C
Temperature range -35 ... 100°C
Temperature range -35...100°C
Length stainless steel case 5 cm
Temperature range -35...100°C
Length stainless steel case 2 cm
Sensors and valves
Connection via myGEKKO points
I/O module acc. to I/O modules
Connection via myGEKKO points
I/O module acc. to I/O modules
Connection via myGEKKO points
I/O module acc. to I/O modules
Description Group Article €
Room temperature sensor PT1000 12 BL000200
Description Group Article €
Cable sensor PT1000 12 TH000200
Description Group Article €
Housing contact sensor PT1000 12 TH000211
Cable contact sensor PT1000 12 TH000210
Description Group Article €
Outdoor temperature sensor PT1000 12 TH000220
Connection via myGEKKO points
I/O modules acc. to I/O modules
Outdoor temperature sensor PT1000
Accessories
54
USB converter / 4xRS232Used for the fourfold expansion of RS232 interfaces.
Technical data
Technische Daten
USB specification 2.0
Interface 4 x RS232 with DB9 connector
Included in the delivery USB connection cable – no external power supply required
Dimensions W x H x D 100 x 20 x 60 mm
Interface 1 x RS232 with DB9 connector 1 x RS485 with DB9 connector
Dimensions W x H x D 75 x 19 x 37 mm
Interface converter
Connection via myGEKKO points
USB -
Connection via myGEKKOpoints
RS232 -
Description Group Article €
USB converter / 4xRS232 12 ACC-RS201
Description Group Article €
Converter RS232 / RS485 12 ACC-RS401
RS 485USBKat 5
RS 232
Rio modules
AccessRS232/RS485 converterACC-RS401
Rio modules
AccessMusicAlarm ...
RS 232 converterACC-RS201
Accessories
Converter RS232 / RS485Used to convert an RS-232 interface into an RS485 interface.
55
Description Group Article €
Thermovalve actuator 24VDC 21 IS000100
Adapter thermovalve version 1 / version 2 / version 3 21 IS000110 / 111 / 112
Description Group Article €
Overvoltage protection for 2 channel 24V 21 DE000100
End cover surge overvoltage protection 21 DE000110
To protect against overvoltage, primarily for external lines as for example at the weather station.
Technical dataArrester class Type 3
Nominal voltage Un 24 V
Nominal current 10 A
Protection type IP 00, with cover IP 20
Mounting on 35 mm DIN rail according to EN60715
Connection cross section 0,08-2,5 mm²
Grounding via DIN rail / terminal
Dimensions W x H X D 57 x 90 x 6 mm
Connection via myGEKKO points
I/O modules acc. to I/O modules
Technical data
Model Currentless closed
Voltage 24V AC/DC, +20%...-10%, 0-60 Hz
Starting current max. 250 mA for max.2 min.
Operating current 75 mA
Operating power 1,8 W
Travel range 4 mm
Positioning force 100 N +/- 5%
Protection type IP 54
Connection cable / Power length 2 x 0,75 mm2 PVC, gray / 1m
Heating valve actuators
Overvoltage protection
Accessories
PWM dim load module
Description Group Article €
PWM dim load module 500VA 12 DO000100
The PWM all-purpose dim load module is used for brightness control of lamps up to 500VA. The dim load module is con-trolled by means of a PWM signal via the RIO-29 digital output.
Technical data
Input voltage range 230 V ± 10% / 50 Hz
Load output Semiconductor output 230VA / 50Hz
Control input PWM signal (digital output RIO 29)
Protection type IP 40 for distribution installation
Connection via myGEKKO points
IO modules acc. to I/O modules
Thermovalve actuator 24VDC
Adapter thermovalve version 1 for the following products: Beulco (starting in 2005) Böhnisch, Cazzaniga, Dumser, Heimeier, Honeywell, Ivar, mng, Onda, Oventrop, Reich Schlösser, Siemens, Taco.Adapter thermovalve version 2 for GiacominiAdapter thermovalve version 3for Danfoss RA
56
Power supply for standard rail mounting
230VAC 24VDC 3,75A 230VAC 24VDC 6,25A
Technical data
Input current 85-264 VAC
Output voltage range DC 24-28V adjustable
Output current 3,7A bei DC 24V (TR000090) 6,25 bei DC 24V (TR000150)
Safety low voltage SELV
Protection type / Protection class IP 20 / II
Mounting On DIN standard rail
Dimensions W x H x D 105 x 89,5 x 59,5 mm (TR000090) 175 x 89,5 x 59,5 mm (TR000150)
Description Group Article €
Power supplies 230 VAC / 24 VDC 3,7 A 12 TR000090
Power supplies 230 VAC / 24 VDC 6,25 A 12 TR000150
Power supplies
Relay 8A 2 changeovers / Relay 16A 1 changeover Technical data8A
2 changeovers16A
1 changeoverNumber of contacts 2 changeovers 1 changeover
Max. continuous current/inrush current A 8/15 16/25
Nominal voltage max. switching voltage V AC 250/400 250/400
Max switching capacity AC1 VA 2.000 4.000
Max. switching capacity AC15 (230VAC) VA 350 750
1-phase motor capacity, AC3-operation (230VAC) kW
0,37 0,55
Max. switching current DC1:30/110/220V A 6/0,5/0,15 12/0,5/0,15
Min. switching capacity mW (V/mA) 300 (5/5) 300 (5/5)
Rated power (VA/W) 1,2/0,5 1,2/0,5
Contact material standard AgNi AgNi
Mounting on DIN standard rail
Socket width 15,8 mm 15,8 mm
Relay
Description Group Article €
Relay 8A 2 changeovers manual switch and socket 12 FI465208
Relay 16A 1 changeover manual switch and socket 12 FI466116
Outdoor siren
The outdoor siren with flashing light and autonomy is oper-ated as alarm control panel when using myGEKKO.
Technical data
Runtime / SPL 7 min / 116 DB - 1 mt
Command Positive or negative
Supply 12/24 VDC
Max. current consumption 1,6 A
Battery 12 V - 0,23 Ah
Ambient temperature -20°C to 50°C
Dimensions W x H x D 30 x 20 x 7,7 mm
Description Group Article €
Outdoor siren with flashing light and autonomy 12 ACC-SIR01
Accessories
57
Room temperature sensor
Energy meter
Accessories
Description Group Article €
Room temperature sensor Thermasgard 4277 12 on request
Description Group Article €
M-Bus energy meter 1 phase 32A 12 BE000110
M-Bus direct energy meter 3 phases 65A 12 BE000500
Thermasgard 4277
The room sensor serves to detect the temperature in closed, dry rooms, in apartments, supermarkets, warehouses, office and business premises.
M-Bus energy meter 1 phase 32A
M-Bus direct energy meter 3 phases 65A
Technical data
Technical data
Technical data
Power supply 8 - 30 VDC
Current consumption 15 mA off-load
Input analog Temperature 0...+50°Cresolution 0,1°C calibration Temperatur +/- 2,5K
Temperature range -10...+50°C ambiente temperaturin operation
Mounting Wall mounting or on in-wallflush box 0 55 mm
Protection class II (according to EN 60 730)
Protection type IP 30 (according to EN 60 529)
Dimensions W x H x D 98 x 106 x 32 mm
Input voltage range 2 phase meter 1x230 V
Current consumption 20 mA
Frequency 50 Hz
Outputs 1 S0-Pulse output
Protection class II
Protection type IP 20
Dimensions W x H x D 17,5 x 95,6 x 68,20 mm
Input voltage range 4 phase meter 3x230 / 400 V
Current consumption 20 mA
Frequency 50 / 60 Hz
Outputs 1 S0-Pulse output
Protection class II
Protection type IP 20
Dimensions W x H x D 107 x 89,5 x 64,2 mm
Connection via myGEKKO points
RS485 max. 2
Connection via myGEKKO points
M-Bus / IO modules
1
Connection via myGEKKO points
M-Bus / IO modules
1
58
Wiring system extensions
GSM-module RS232ACC-GSM01
IO modulesmyGEKKO/Wago
Recommended cable
RS485: Pro�bus L2FIP 1x2x0,65RS232: J-Y(ST)Y420 2x2x0,8mmM-BUS: J-Y(ST)Y420 2x2x0,8mm
GSM
RS 232RS 485
RS 485
IO modulesmyGEKKO/Wago
IO modulesmyGEKKO/Wago
RS232-RS485 converterACC-RS401
Access
max. 8 reader .... Mifare or FingerprintACC-ACC01 / ACC-ACC55
RS 485RS 232MBUSAudioUSB
LAN MP3 Player 2x25WACC-LPL02
GSM - Access- M-Bus - Music - Video
max. 8 reader .... Mifare or Fingerprint
ACC-ACC01 / ACC-ACC55
GSM-module RS232ACC-GSM01
max. 4 m/
energy meter
LANIP/Webcam
LAN
Interfaceconverter
System diagrams
59
myGEKKO network
LAN
RS 485
myGEKKO Touch to control:- Light circles 2nd �oor- Roller shutter circles 2nd �oor- Roof windows 2nd �oor- Gutter heating- Individual room control 2nd �oor- Switched sockets 2nd �oor- Ventilation system 2nd �oor- Power meter 2nd �oor- Access control 2nd �oor- Central control 2nd �oor2nd �oor
1st �oor
Ground foor
Basement
myGEKKO Touch to control:- Light circles 1st �oor- Roller shutter circles 1st �oor- Individual room control 1st �oor- Switched sockets 1st �oor- Ventilation system 1st �oor- Power meter 1st �oor- Access control 1st �oor- Central control 1st �oor
myGEKKO Touch at the caretaker to control:- Light circles ground �oor + outdoor lighting - Roller shutter circles GF- Ramp heating- Individual room control GF- Switched sockets GF- Ventilation system GF- Power meter GF- Access control GF and main entrance- Central control GF- Central control entire building- Central management of the myGEKKO family- Video surveillance - Sending alarm messages via SMS
myGEKKO Touch cabinet installation in the equipment room to control:- Light circles basement- Heating circuit control- Boiler charging- Solar system- Circulation pump- Boiler demand- Irrigation- Load shedding control
myGEKKO Touch
myGEKKO Touch
myGEKKO Touch
myGEKKO Touch
Example o�ce building
LAN
System diagrams
60
Enthral customersThe myGEKKO Slide in its convenient sample case is versatile and ideal for customer visits and demonstrations.
The customer can test the myGEKKO in practice and form her own opinion about its simple operation, the neatly arranged navigation menu and the ample application possibilities.
Included in the sample case are the myGEKKO Slide with precon-figured demo software, a table stand, a RIO-module and a power supply.
Quick request for proposal via the online configurator Via the myGEKKO online configurator it is possible to request a myGEKKO offer without obligation. Just select the desired functions, the appropriate equipment and send it.
You will receive a corresponding no obligation quote from us. We are pleased to assist you in your projects from planning until commissioning.
myGEKKO trainingsPeriodically, we give myGEKKO product trainings for build-ers, electricians and planners / architects. Training dates are published on our website. If interested, you can also pre-register and we will keep you informed about training dates in your area.
myGEKKO Sample case
Work with myGEKKO
Description Group Article €
myGEKKO Sample case English with Slide and RIO 29 17 GKSET-SLEN001
61
Manual for myGEKKO AppsWith myGEKKO you have chosen a constantly expanding product. The apps are continuously adapted to technological innovations and enhanced with new features.
Visit our Wiki (online manual) onhttp://de.wiki.my-gekko.com
Technical manuals We provide comprehensive manuals for the respective func-tions and cabling options. The manuals contain the necessary technical data, connection options as well as the commission-ing on myGEKKO. The manuals are updated constantly and can be retrieved at any time from our website.
Visit our download area on www.my-gekko.com
Support via data backupIf support via remote access is not feasible (e.g. no working internet connection) the complete settings may be saved on a USB flash drive. The technician can then upload the settings to a sample device and control them externally.
Support via remote accessThe technician can respond quickly and easily to customer problems via remote access. He can always connect (after activation) with the system and advise the client via phone to solve the problem together – without journey, appointment arrangement or extended time consumption.
Direct assistance from myGEKKODo you have a problem with your system and need help? Our support team is pleased to help you. To do this, simply write an e-mail to [email protected].
Comprehensive documentation
Support
62
Distribution
Switzerland and Liechtenstein
Bettschen Elektronik AGAllenwindenstraße 1 CH-8247 Flurlingen T. +41 (0) 52 647 30 30F. +41 (0) 52 647 30 [email protected]
Italy
Region Veneto, Friauli Venezia Giulia, provinces Mantova and BresciaV.S.D. GmbHVia Torricelli 71BI-37136 Verona (VR) T. +39 045 6305453F. +39 045 [email protected]
ItalyEkon GmbH - headquartersRienzfeldstraße 30I-39031 Bruneck (BZ) T. +39 0474 551820F. +39 0474 [email protected]
Region Trentino-Südtirol Prader GmbHHandwerkerzone am Gornegg 9I-39040 Lajen (BZ) T. +39 0471 655802F. +39 0471 [email protected]
Postal code areas 1, 2, 4, 5 and 9Stöckl GmbH für GebäudeautomationDrosselweg 9 D-90617 Puschendorf T. +49 (0) 9101 7818F. +49 (0) 9101 [email protected]
Postal code areas 6 and 7Ricolo GmbH Reustadt 14 D-73110 Hattenhofen T. +49 (0) 7164 919730F. +49 (0) 7164 [email protected]
Postal code area 8BS-SystemeAm Sportzentrum 5D-85646 Anzing T. +49 (0) 8121 229378F. +49 (0) 322 [email protected]
Postal code area 3Bus-Profi Gebäudeleittechnik GmbH Berkhopstr. 8 D-30938 Großburgwedel T. +49 (0) 5139 9573420F. +49 (0) 5139 [email protected]
Germany
Region Trentino-Südtirol Hotel solutionsHerokal GmbHB. Buozzi Str. 19 I-39100 Bozen (BZ) T. +39 0471 [email protected]
63
Our offices take care of consulting, sales and support in the respective zones. Through direct cooperation between headquarters and branches we can deliver optimized, country-specific automation solutions.
The companyHeadquarters - Ekon GmbHSince the foundation of the Ekon GmbH we have been dealing with home and building automation and have been searching for solutions to minimise costs while increasing comfort. From the combination of many years of experience and countless projects a comprehensive control concept emerged, which we had successfully brought to market in 2002. Since 2006 this concept has officially been presented under the name myGEKKO. Our team is constantly working on new challenges, new technologies and on extending the functional scope.
Austria
Honauer & iCon Ges.m.b.H.Unterauerstraße 11A - 3370 Ybbs an der Donau T. +43 (0) 7412 540050 F. +43 (0) 7412 [email protected]
Europe
Ekon GmbH - headquartersRienzfeldstraße 30 - Gedi CenterI-39031 Bruneck (BZ) T. +39 0474 551820F. +39 0474 [email protected]
64
A first class product of Europe!The result of a close collaboration between Italy, Switzerland and Germany
A first class product of Europe!The result of a close collaboration between Italy, Switzerland and Germany
www.my-gekko.com
myGEKKO is a product born from a longlasting experience and development all
over Europe - with partners in your neighbourhood.
Italy Germany Switzerland Austria Netherlands