POWER TRANSMISSION PRODUCTS
TO PERFORMPASSION
A WORLDWIDE LEADER IN THE FIELD OF HYDRAULIC FILTRATION EQUIPMENT.
Our company started life in 1964, when Bruno Pasotto decided to attempt to cater for the requests of a market still to be fully explored, with the study, design, development, production and marketing of a vast range of fi lters for hydraulic equipment, capable of satisfying the needs of manufacturers in all sectors.The quality of our products, our extreme competitiveness compared with major international producers and our constant activities of research, design and development has made us a worldwide leader in the fi eld of hydraulic circuit fi ltering.Present for over 50 years in the market, we have played a truly decisive role in defi ning our sector, and by now we are a group capable of controlling our entire chain of production, monitoring all manufacturing processes to guarantee superior quality standards and to provide concrete solutions for the rapidly evolving needs of customers and the market.
A WORLDWIDE LEADER IN THE FIELD OF HYDRAULIC FILTRATION EQUIPMENT.
1
Our customer-oriented philosophy, which enables us to satisfy all customer requests rapidly and with personalized products, makes us a dynamic and fl exible enterprise.The possibility of constantly controlling and monitoring the entire production process is essential to allow us to guarantee the quality of our products.
Our work is based on a skillful interaction between advanced technology and fi ne workmanship, customizing products according to specifi c market requests, focusing strongly on innovation and quality, and following every step in the manufacturing of both standard and special products, fully respecting customer expectations.
Introduction 2
LEADERMARKET
USA
CANADAUNITED KINGDOM
FRANCE
ITALY
GERMANY
INDIA
RUSSIA
P.R. CHINA
WORLDWIDE PRESENCE
8The Group boasts business branches
Our foreign Branches enable us to offer a diversified range of products that allow us to successfully face the aggressive challenge of international competition, and also to maintain a stable presence at a local level.
Introduction3
Introduction 4
TECHNOLOGY
Our constant quest for excellence in quality and technological innovation allows us to offer only the best solutions and services for applications in many fields, including general industry, test rigs, l u b r i c a t i o n , h e a v y e ng i n e e r i n g, r e n ewab l e energ ies, nava l engineering, offshore engineering, aviation systems, emerging technologies and mobile plant (i.e. tractors, excavators, concrete pumps, platforms).
Introduction5
AND PRODUCTION
Our high level of technological expertise means we can rely entirely on our own resources, without resorting to external providers. This in turn enables us to satisfy a growing number of customer requests, also exploiting our constantly updated range of machines and equ ipmen t , f ea tu r i ng fu l ly-automated workstations capable of 24-hour production.
Introduction 6
Flow rates up to 3000 l/min
Pressure up to 20 bar
Mounting:- In-Line- Tank top- In single and duplex designs
Flow rates up to 300 l/min
Pressure up to 80 bar
Mounting:- In-Line- Tank top
Flow rates up to 875 l/min
Mounting:- Tank immersed- In-Line- In tank with shut off valve- In tank with � ooded suction
Flow rates up to 750 l/min
Pressure from 110 bar up to 560 bar
Mounting:- In-Line- Manifold- In single and duplex designs
Flow rates up to 3000 l/min
Pressure up to 80 bar
Mounting:- In-Line- Parallel manifold version- In single and duplex designs
LOW & MEDIUM PRESSURE FILTERS
HIGH PRESSURE FILTERS
SPIN-ON FILTERS
Flow rates up to 365 l/min
Pressure up to 35 bar
Mounting:- In-Line- Tank top
SUCTION FILTERS
RETURN FILTERS
RETURN /SUCTIONFILTERS
Introduction7
PRODUCT RANGE
Flow rates up to 150 l/min
Pressure from 320 bar up to 1000 bar
Mounting:- In-Line- Manifold- In single and duplex designs
STAINLESS STEEL HIGH PRESSURE FILTERS
CONTAMINATION MONITORING PRODUCTS
Flow rates from 15 l/min up to 200 l/min
MOBILE FILTRATION UNITS
- Oil � ller and air breather plugs- Optical and electrical level gauges- Pressure gauge valve selectors- Pipe � xing brackets- Pressure gauges
- Aluminium bell-housings for motors from 0.12 kW to 400 kW- Couplings in Aluminium Cast Iron - Steel- Damping rings- Foot bracket- Aluminium tanks- Cleaning covers
POWER TRANSMISSIONPRODUCTS
ACCESSORIES
- Online, in-line particle counters- Off-line Bottle sampling products- Fully calibrated using relevant ISO standards- A wide range of variants to support � uid types and communication protocols
MP Filtri can offer a vast and articulated range of products for the global market, suitable for all industrial sectors using hydraulic equipment.
This includes filters (suction, return, return/suction, spin-on, pressure, stainless steel pressure) and structural components (motor/pump bell-housings, transmission couplings, damping rings, foot brackets, aluminium tanks, cleaning covers).
We can provide all the skills and solutions required by the modern hydraulics industry to monitor contamination levels and other fl uid conditions.
Mobile fi ltration units and a full range of accessories allow us to supply everything necessary for a complete service in the hydraulic circuits.
POWER TRANSMISSION PRODUCTS
Introduction 8
INDEX
LMG
LMC - LDC
LMS - LDS
MULTI-COMPONENTS
General Information
Bell-housing with rectangular flange
Bell-housing for piston, screw and vane pumps
Bell-housing - Low Noise
Bell-housing - Multi-components 2 - 3
BELL-HOUSING
46
51
63
71
79
page45
ANM A
PDM A
MPDR PDMA - MPDR
OB
SE10
Damping rings
Foot brackets
Damping rods
Cleaning covers
Aluminium tanks
ACCESSORIES
102
104
105
106
111
page101
COMPANY
PRODUCT RANGE
BELL-HOUSING & COUPLING SIZING
SELECTION SOFTWARE
INTRODUCTION
1
6
10
12
page1
SGEA - SGEG - SGES - EGE
SGDR - EGR
General Information
Flexible half-couplings
Gear couplings
COUPLINGS
16
21
39
page15
Introduction9
BELL-HOUSING & COUPLING SIZINGA GUIDE TO SELECT THE CORRECT BELL-HOUSING AND DRIVE COUPLING
- Electric motor power/motor size- Manufacturer and pump type
Pages 63 ÷ 69 for IEC Electric motor size 100-112 - LMC250
LMC 250 bell-housing with height ≥ 135.5 - LMC250AFSQ
The bell-housing code must be completed with pump drilling code (see pages 48-49).For the specific case:Spigot hole 82.55 - PCD 106.4 - Nr.2 holes M10 : Drilling code 060
Definitive bell-housing code LMC250AFSQ060
Pages 71 ÷ 77 for IEC Electric motor size 100-112 - LMS250
LMS 250 bell-housing with height ≥ 135.5 - LMS250AFSA
The bell-housing code must be completed with pump drilling code (see pages 48-49).For the specific case:Spigot hole 82.55 - PCD 106.4 - Nr.2 holes M10 : Drilling code 060
Definitive bell-housing code LMS250AFSA060
1 - Pump and motor shaft dimensions (see electric motor data sheet)2 - Shaft and flange pump (see pump data sheet)
Example:- Electric motor 2.2 kW - size 100-112- Atos pump code PFE31 - Shaft 1
DATA REQUIRED
Bell-Housing’s length calculation
Case ASolution with monobloc bell-housing series LMC/LDC
Case BSolution with low noise bell-housing series LMS/LDS
TO VERIFY:
- H = 60 + 18 + 57.5 = 135.5 mm (18 = Sp spider - see page 31)
- Choose type of bell-housing (LMC - LMS): For monobloc bell-housing LMC/LDC series see pages 63 ÷ 69 For Low noise bell-housing LMS/LDS series see pages 71 ÷ 77 For Multi-components 2-3 bell housing series see pages 79 ÷ 99
Note: The length of bell-housing must be ≥ than the length calculated (135.5 mm)
IEC Electric motor dimension Hydraulic pump dimension
ø28 - key 8
ø19.05 - key 4.76ø250
60 57.5
9.5ø82.55
ø106.4
Nr.2ø11
code M05 see page 18
code G01 see page 18
Introduction 10
BELL-HOUSING & COUPLING SIZINGA GUIDE TO SELECT THE CORRECT BELL-HOUSING AND DRIVE COUPLING
Motor half-coupling (see page 26)For IEC Electric motor size 100/112, the half-coupling is SGEA21M05060FG
Spider (see page 31)For SGEA21, EGE2 - EGE2RR(choose spider material on the base of the application, oil, temperature and cycle machine, etc.)
Pump half-couplingChoose the drilling code - see pages 18-19 for shaft 19.05 - key 4.76 - code: G01
Pump half-coupling length = BH length - THK Spider - THK Spigot LMC = 138 mm - 60 - 18 - 9.5 = 50.5 mm LMS = 148 mm - 60 - 18 - 9.5 = 60.5 mm
LMC - Choose the half-coupling’s length at page 26 ≤ 50.5 mm.LMS - Choose the half-coupling’s length at page 26 ≤ 60.5 mm.LMC - Available length for SGEA21 = 50 mmLMS - Available length for SGEA21 = 60 mmHalf coupling for LMC: SGEA21G01050FGHalf coupling for LMS: SGEA21G01050FG
Coupling selection
SOFTWARE FOR AUTOMATIC CALCULATION
available on the web site www.mpfiltri.com
Note: for multi pumps we recommend to use a specific support on the base of the pump’s dimensions and weight.
Introduction11
BELL-HOUSING & COUPLING SIZING Selection Software
Select “BELL-HOUSING & COUPLING”Step 1
Choose Coupling materialStep 4
Choose Manufacturer: select “Pump type” and “Pump model”
Step 2
Choose nr° of poles of “Electric motors”: select “Electric motors type” and “Electric motors size”
Step 3
Introduction 12
BELL-HOUSING & COUPLING SIZINGSelection Software
Download PDF Datasheet and “DXF Drawing” of your selection
Step 7
Push “CLICK HERE TO PROCEED”, then choose best solution for your application.Step 5
Sec. A-A
Ques
todo
cum
ento
e'di
prop
rieta
' dell
aM
Pfilt
riS.
p.A.
-Sen
zaau
toriz
zazio
nesc
ritta
della
stess
ano
npo
tra' e
sser
eut
ilizza
tope
rla
costr
uzion
ede
ll'ogg
etto
rapp
rese
ntat
one
venir
eco
nunic
ato
ate
rzi.
Laso
cieta
'pro
priet
aria
tute
laip
ropr
idirit
tiarig
ore
dileg
ge.
Allp
ropr
ietar
yrigh
tsre
serve
dbyM
Pfilt
riS.p.
A.-T
hisdr
awing
shall
notb
erep
rodu
ced,
orin
anyw
ayuti
lized
,fort
hema
nufac
tureo
fthec
ompo
nent
orun
ither
einillu
strate
dand
must
notb
erele
ased
tooth
erpa
rties,
witho
utwr
ittenc
onse
nt.A
nyinf
ringe
ment
willb
eleg
allyp
ursu
ed.
Revis
ioni/M
odific
ation
Per errori ammissibili di quotesenza tolleranze e per altre prescrizioni generali vediUNI EN 22768-1/1996 - f
For the permissible errors on thedimensions without tollerance andfor other general specifications .See UNI EN 22768-1/1996 - f
Data/Date
Data/Date
Q.tà/Qty
Disegnato/Drawn.
Controllato/Checked
Peso/Weight
Scala/Scale
N° Disegno/Drawing No.
Dis.grezzo/Raw Componente/ComponentNorma di collaudo/Tested std.
Denominazione/Description
Trattamento/Treatment
Sostituisce/Supersedes
Prodotto/Product
Materiale/Material
REV. Tav./Sht.
di/of
20/02/2017
1:2
1 1
FORMAT
A3
A
A
B.O.M.DESCRIPTIONCODEQTYITEM
Monobloc BellhousingLMC350AFSU0721ASpiderEGE51BMotor Half CouplingSGEA51D02045FG1CPump Half CouplingSGEA51M07109FG1D
140
300
Nr. 4 holes M16
350
Ø
250
Ø
21.hC-
Ø24
54,5
109 26 45
8 M
31
194
100
Ø
8.hC-
Ø52
Nr.2 holes M12
AKMM05Z0007Complete kit for:-IEC Electric Motor Size 160-Pump Bosch Rexroth A10VSO45 shaft P C.a. 7Kg
Complete Kit
Ø
Ø
Revis
ioni/M
odific
ation
Push “PREVIEW” to download the reports.Step 6
Insert pump’s dimension on the section
“INSERT PUMP” and follow the instructions
to achieve the couplings components code
You can’t fi nd the pump on the system?
Introduction13
Drive couplings provide the means by which power is transmitted from the electric motor to the hydraulic pump.
By virtue of their fl exible structure, they are able to compensate angular and radial misalignments between motor and pump, and appreciably attenuate the noise generated through the drive line.
The couplings illustrated are available in aluminium and cast iron versions, with a variety of spider options, and will cover a range of applications using electric motors from size 63, rated 0.15 kW, up to size 400 rated 400 kW.
Grub screw on all half-couplings.Cast iron half-coupling SGEG available with screw mounted.Steel half-couplings SGES and SGDR available with screw.
Standard ATEX 2014/34/EUHalf-couplings are available to use in hazardous area.The couplings are certifi ed according to Standard ATEX 2014/34/EU - Category certifi ed 2G - Area 1 and 2.Other information available on our web site “www.mpfl tri.com”.
The half-couplings SGE*** series are in conformity to normative DIN 740/2.The max torque to transmit is always less than the max torque that the coupling can transmit.
Couplings 14
Couplings
SGEA - SGEG - SGES - EGE
SGDR - EGR
GENERAL INFORMATION
21
39
16page
Couplings15
GENERAL INFORMATION SGE SERIES
Admissible misalignment radial, angular and axial
Standard ATEX 2014/34/EU
MP Filtri couplings are developed with:
The half-couplings series SGE*** allow secure transmission between the electric motor and the driven side; they are able to absorb shocks and vibration, in addition to compensating radial misalignment, angular and axial.
The assembly of the couplings can be horizontal/vertical, withstanding vibration and load reversals.
The complete range of couplings are extrapolated from the on-line software, with a length equal than the shaft on which must be mounted and they are completed with grub screw for fixing located on the key.
Available for cylindrical shaft with metric and imperial dimensions as well for splined shafts as per specification DIN, ISO and SAE.
Half-couplings are available to use in hazardous area.The couplings are certified according to Standard ATEX 2014/34/EU - Category certified 2G - Area 1 and 2.Other information available on our web site “www.mpfiltri.com”.
Drawings 3D available on website www.mpfiltri.com at section TOOLS.
CAD 3D FEM
Max admissible radial misalignment Max admissible angular misalignment Max admissible angular alignment
SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90
0.51.01.01.01.51.52.02.0
Half-coupling R [mm]SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90
1.5°
Half-coupling ß [°]SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90
2.02.53.03.53.53.54.05.0
Half-coupling A [mm]
Couplings 16
Small pumps, uniform load, low operating pressurese.g. rotary action machine tools - 5/8 work cycles per hour
Small pumps, uniform load, high working pressurese.g. lifting equipment - 120-150 work cycles per hour
Pumps, non-uniform loade.g. lifting equipment - 280-300 work cycles per hour
GENERAL INFORMATIONSIZING
Examples verification of the coupling
Select the half-coupling of the calculated size from the motor half-couplings table.Note: When selecting the coupling, remember that for pumps with splined shaft, only cast iron couplings of the SGEG series can be used.
1.3
1.5
1.7
Mt: 9560 x kW / rpm = NmMe > Mt x S = NmWhere:Mt: Torque transmitted by electric motorMe: Torque transmitted by couplingkW: Power of electric motorRpm: Revolutions per minute of electric motorS: Service factor
ExampleElectric motor, 4 pole - 4 kWhydraulic pump, uniform load, low operating pressureMt: 9560 x 4 / 1500 = 25.45 NmMe > 25.49 x 1.3 = 33 Nm
Half-coupling SGEA21 meets the above requirement.
Torque transmitted by electric motor:
Table 1
Determine the size of the coupling according to the type of installation and application envisaged, on the basis of the formulas and the following tables:
Nominal and maximum torque values are referred to couplings assembled with standard flexible spiders of the EGE** series (see page 31). Where higher torques are to be transmitted, use flexible spiders of the EGE**RR series (see page 31).
Table 2
SGEA01SGEA21SGEA31SGEA51 ALUMINIUM
CAST IRON
STEEL
SGEG01SGEG30SGEG40SGEG60SGEG80SGEG90
SGES40SGES60SGES80
436875
109.5
15160340550
20190380620
408095
120160200
20400550760
22005500
30450620850
25006100
95120180
550760
2200
620850
2500
Half-coupling type
External diameter[mm]
Nominal torque Me - Nm
Maximum transmissible torque Me - Nm
Couplings17
GENERAL INFORMATION PUMP SHAFT CODES
Parallel shaft - Metric Dimensions Parallel shaft - Imperial Dimensions
C00C01C02C03C04C05C06C07C08C09C10C11D00D01D02D03D04D05D06D07D08D09D10D20E00E01E02E03E04E05E06E07M00M01M02M03M04M05M06M07M08M09M10M11M12M13M14M15M16M17M18
121516161718201930201615222425303235404550702252
810223235822563
9111419242838424855606575809095
100110
85
45455655
106546688
101012141420
816
33588
227
18345688
10121416181820222525282822
ø [mm] key [mm] Code
Parallel shaft - Double Key
C02***2H
C06***2M
C07***2L
D01***2N
D03***2P
G02***2E
G04***2F
G06***2G
16.00
20.00
19.00
24.00
30.00
22.22
25.40
31.75
4.005.005.006.005.006.006.008.008.00
10.004.766.356.354.766.357.94
ø [mm] key [mm] Code
profile
key
key
ø
key
ø
DOUBLE KEY VERSION
*** = coupling length
G00G01G02G03G04G05G06G07G08G09H00H01H02H03H04H05H06H07H08H09L00L01L02L03L04L05L06L07L08L09L10L15
7/16”3/4”7/8”7/8”1”1”
1 1/4”1 1/4”1 3/8”1 1/2”1 5/8”1 3/4”
2”2 11/32”
3/4”1”
5/8”17/32”11/16”
1/2”5/8”7/8”
11/8”3/4”
1 7/8”3 3/8”2 3/8”2 3/8”2 7/8”3 5/8”1 5/8”1 1/8”
11.11 19.0522.2222.2225.4
25.4031.7531.7534.9438.1
41.2744.4550.8
53.9419.0225.4
15.8713.4517.4612.7
15.8722.2228.5819.0547.6385.7360.3360.3373.0392.0741.6
28.58
1/8”3/16”3/16”1/4”
3/16”1/4”1/4”
5/16”5/16”3/8”3/8”
7/16”1/2”1/2”1/8”
3/16”3/16”1/8”
3/16”1/8”
5/32”5/32”1/4”1/4”1/2”7/8”5/8”1/2”3/4”7/8”
15/32”5/16”
3.184.764.766.354.766.356.357.947.949.529.52
11.1112.712.73.174.764.763.184.763.183.97
46.356.3512.7
22.2315.8812.7
19.0522.22
127.94
ø key Code[inch] [inch][mm] [mm]
Couplings 18
GENERAL INFORMATIONPUMP SHAFT CODES
SAE Bore - ANS.B.92.1-1970 Splined bore as per standard DIN5480
PD01PD02PD03PD04PD05PD06PD07PD08PD09PD10PD11PD12PD13PD14PD15PD16PD17PD18PD19PD20PD21PD22PD23PD24PD25PD26PD27PD28PD29PD30PD31PD32PD33PD34PD35PD36PD37
PA01PA02PA03PA04PA05PA06PA07PA08PA09PA10PA11PA12PA13PA14PA15PA16PA17PA18PA19PA20PA21PA22PA23PA24PA25PA26PA27PA28PA29PA30
17 th 8/1614 th 12/2416 th 12/2417 th 12/249 th 16/3211 th 16/3212 th 16/3213 th 16/3215 th 16/3221 th 16/3223 th 16/3227 th 16/3240 th 16/3220 th 24/4821 th 24/4823 th 24/4825 th 24/4826 th 24/4827 th 12/4828 th 24/4829 th 24/4832 th 24/4821 th 32/6430 th 32/6433 th 32/6423 th 40/8036 th 48/9641 th 48/9647 th 48/9613 th 8/1615 th 8/1614 th 16/3240 th 16/3233 th 16/329 th 20/4010 th 16/3225 th 20/40
W18 x 1.25 x 13W20 x 1.25 x 14W25 x 1.25 x 18W28 x 1.25 x 21W32 x 1.25 x 24W38 x 1.25 x 29W30 x 2 x 14W32 x 2 x 14W35 x 2 x 16W37 x 2 x 17W38 x 2 x 18W40 x 2 x 18W42 x 2 x 18W45 x 2 x 21W50 x 2 x 24W55 x 2 x 26W60 x 2 x 28W70 x 2 x 34W80 x 2 x 38W60 x 3 x 18W70 x 3 x 22W75 x 3 x 24W90 x 3 x 28W105 x 3 x 34W80 x 3 x 25W50 x 1.25 x 38W62 x 1.25 x 48W40 x 1.5 x 25W32 x 1.5 x 20W40 x 1.25 x 30
171416179
11121315212327402021232526272829322130332336414713151440339
1025
131418212429141416171818182124262834381822242834253848252030
Profile ProfileNr. of Th Nr. of ThCode Code
Splined bore as per standard DIN5482
PB01PB02PB03PB04PB05PB06PB07PB08PB09PB10PB11PB12PB13PB14PB15PB16PB17PB18PB19PB20PB21PB22PB23PB24PB25PB26PB27PB28PB29PB30PB31PB32PB33PB34PB35PB36
A15 x 12A17 x 14A18 x 15A20 x 17A22 x 19A25 x 22A28 x 25A30 x 27A32 x 28A35 x 31A38 x 34A40 x 36A42 x 38A45 x 41A48 x 44A50 x 45A52 x 47A55 x 50A58 x 53A60 x 55A62 x 57A65 x 60A68 x 62A70 x 64A72 x 66A75 x 69A78 x 72A80 x 74A82 x 76A85 x 79A88 x 82A90 x 84A92 x 86A95 x 89A98 x 92A100 x 94
89
10121314151617181920212223242526272829303132333435363738394041424344
Profile Nr. of Th Code
Splined bore as per standard DIN5481
PC01PC02PC03PC04PC05PC06PC07PC08PC09
8 x 1010 x 1212 x 1415 x 1717 x 2021 x 2426 x 3030 x 3460 x 65
283031323334353641
Profile Nr. of Th Code
*** = coupling length
Couplings19
Couplings 20
SGEA - SGEG - SGES - EGEseries
Aluminium - Cast Iron - Steel couplings
Couplings
Couplings21
Technical data
SGEA-SGEG-SGES-EGE
SGEA: Pressure die cast aluminiumSGEG: Cast Iron en-GJL-250 (gg25)SGES: Steel C40
Half-couplings materials
- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Spider oil-resistant rubber: from -20 °C to +90 °CSpider polyurethane resin: from -30 °C to +120 °C
Temperature
Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
Special Applications
For temperatures outside this range, contact MP Filtri Technical and Sales Department
NoteEGE** series: Oil-resistant NBR 85 Shore A - black colourEGE**RR series: in polyurethane Laripur - 92 Shore A - LPR202-95A - red colour
Spider materials
GENERAL INFORMATION
Couplings 22
SGEA-SGEG-SGES-EGE
Range
GENERAL INFORMATION
IEC 63 ø 140 - ø 11x23IEC 71 ø 160 - ø 14x30IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 110 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170IEC 355 ø 800 - ø 90x170
3
Shaft ISO 3019-2
Shaft DIN 5480
Shaft ISO 3019-2
Shaft DIN 5481
Shaft ANSI B92. 1A 1976
Shaft DIN 5482
0.5 1 2
G25 UNI 5007 Cast Iron - C40 Carbon Steel
European standard size3.5 4
IEC Electric Motorssize
IEC Electric Motorssize
Aluminiun
German standard sizeZB ZF ZG
Couplings23
SGEA-SGEG-SGES
Pump half-coupling
Pump half-coupling
Series and material
Series and material
Size
Size
Configuration example:
Configuration example:
SGE
SGE
FG
Groub screw (necessary for SGEA series only)
G
S
S
FG
SGE
SGE
A
G
Cast Iron
Steel
21 30
30
30
30
Steel
31 40
40
40
40
80
80
80
80
51 60
60
60
60
90
90
90
90
See page 18 (parallel shaft - double key)
Aluminium
Cast Iron
01 01
01
01
01
PUMP HALF-COUPLING FOR PARALLEL SHAFT
PUMP HALF-COUPLING FOR SPLINED SHAFT
Pump shaft code
Pump shaft code
Double key way (available combinations only)
Length
Length
G02
PD02
2E
050
050
See pages 26 ÷ 30
See page 18
See pages 28 ÷ 30
See pages 19
2EG02
PD02
050
050
A
G
21
40
Designation & Ordering code
SGEA
SGEG
SGEG
SGES
SGES
Couplings 24
IEC ELECTRIC MOTORSCouplings for standard IEC motors, protection class IP 54 / IP 55
SGEA-SGEG-SGES
0.320.410.620.861.31.92.53.75
7.4
9.8
131825
36496071
97120
145177241289353423513641
80210101140128016001790202022702560
A. C. motor 50 Hz
56
63
71
80
90S90L
100L
112M
132S
132M
160M
160L180M180L
200L
200S225M250M280S280M315S315M
315L
315
355
400
SizeShaft end dxl [mm]
9 x 20
11 x 23
14 x 30
19 x 40
24 x 50
28 x 60
38 x 80
42 x 110
48 x 110
55 x 110
2-pole 4, 6, 8 pole
Motor output n=3000 RPM 2 poles
Output P[kW]
TorqueT [Nm]
55 x 110
60 x 140
65 x 140
75 x 140
80 x 170
60 x 140
65 x 140
75 x 140
80 x 170
85 x 170
95 x 170
110 x 210
0.090.120.180.250.370.550.751.11.52.2
3
45.57.5
1115
18.522
3037
45557590
110132160200
250315355400500560630710800
0.430.640.881.31.82.53.75.17.51015202736
49
72
98121144196
240292356484581707849
10301290
160020202280257032103580403045405120
Motor output n=1500 RPM 4 poles
Output P[kW]
TorqueT [Nm]
0.060.090.120.180.250.370.550.751.11.52.234
5.5
7.5
11
1518.52230
3745557590
110132160200
250315355400500560630710800
0.430.520.71.12
2.83.95.88
12
15
22
30
4055
75
109
148181215
293361438535727873
10701280155019302410
304038504330481053906060
Motor output n=1000 RPM 6 poles
Output P[kW]
TorqueT [Nm]
0.0370.0450.060.090.180.250.370.550.751.1
1.5
2.2
3
45.5
7.5
11
1518.522
303745557590
110132160200250
315400450500560630
1.41.82.53.55.37.911162130
40
5474
100
145198
244290392483587712971
11701420171020702580
322040604570515057906420
Motor output n=750 RPM 8 poles
Output P[kW]
TorqueT [Nm]
0.090.120.180.250.370.550.751.11.52.2
3
45.57.5
1115
18.522303745557590
110132160200
250315355400450500
Couplingsize
01
21
31
40/51
60
80
90
Couplingsize
01
21
31
40/51
60
80
90
Couplingsize
01
21
31
40/51
60
80
90
Couplingsize
01
21
31
40/51
60
80
90
Couplings25
Dimensions
Motor half-coupling
Pump half-couplings
44.0 21 11 4 M5 44.0 28 14 5 M5 44.0 40 19 6 M5 70.0 40 19 6 M6 44.0 48 24 8 M5 70.0 48 24 8 M6 70.0 60 28 8 M6 85.0 60 28 8 M8 70.0 80 38 10 M6 85.0 77 38 10 M8 109.5 77 38 10 M8 109.5 109 42 12 M8 109.5 109 48 14 M8 109.5 109 55 16 M8
SGEA01M01019FGSGEA01M02028FGSGEA01M03040FGSGEA21M03040FGSGEA01M04048FGSGEA21M04048FGSGEA21M05060FGSGEA31M05060FGSGEA21M06080FGSGEA31M06077FGSGEA51M06077FGSGEA51M07109FGSGEA51M08109FGSGEA51M09109FG
0.070.080.120.300.130.280.330.480.440.781.601.601.601.90
Weight [kg]De L ø key FGIEC - Electric motors
6371
80
90
100 - 112
132
160180200
Motor size Shaft end [d x l]11x2314x30
19x40
24x50
28x60
38x80
42x11048x11055x110
Dimensions [mm]Half-coupling code
SGEA Aluminium
Notes: - Screw not included- Double key version pump side only
Double key versionkey
De
ø ø
key
key
11 19 44.0 17 50 15 24 70.0 23 50 25 28 70.0 40 60 18 32 85.0 40 60 38 42 85.0 60 80 18 40 109.5 40 70 38 55 109.5 70 109
SGEA01 *** ***SGEA21 *** ***SGEA21 *** ***SGEA31 *** ***SGEA31 *** ***SGEA51 *** ***SGEA51 *** ***
Half-coupling code Standard lengths [mm]ø min ø max De L min L max FG
M5M6M6M8M8M8M8
Complete the half-coupling code with the shaft’s code and lengthExample: SGEA51D02040FG
D02 - see page 18040 - table “pump half-coupling - standard lengths”
Dimensions [mm]
17354042604270
23404245654575
30424448704880
40444850775085
44485052805290
48505555-
5595
--5858-58
100
--6060-60
105
-----65
109
-----
70-
Couplings 26
Half-coupling for gear pumps - tapered
Half-coupling for gear pumps - parallel
Weight [kg]
Weight [kg]
ConicalDimensions [mm]
Dimensions [mm]
44.0 14.5 16.0 9.7 2.4 44.0 16.0 16.0 13.9 3 44.0 11.5 14.5 9.8 2 70.0 14.5 21.5 9.7 2.4 70.0 18.5 21.5 13.9 3 70.0 21.5 21.5 17.2 3.2 - 4 70.0 20.0 21.5 16.9 3 70.0 27.0 41.0 21.6 4 85.0 14.5 37.0 9.7 2.4 85.0 17.5 36.0 13.9 3 85.0 23.0 37.0 17.2 3.2 - 4 85.0 27.0 37.0 21.6 4 85.0 35.0 37.0 25.6 4.76 - 5 85.0 17.0 37.0 16.9 3 85.0 27.0 34.0 25.2 5 109.5 23.5 32.0 17.2 3.2 - 4 109.5 25.0 32.0 21.6 4 109.5 32.0 32.0 25.6 4.76 - 5 109.5 19.5 32.0 16.9 3 109.5 25.0 32.0 24.6 5
44 10.0 17.0 6 2 44 10.0 17.0 7 2 44 - 17.0 12 3 70 14.5 21.5 12 3 85 14.5 37.0 12 3
SGEA01FS100SGEA01FS1M0SGEA01FSZBR SGEA21FS100SGEA21FS1M0SGEA21FS200SGEA21FSZFRSGEA21FS300 SGEA31FS100SGEA31FS1M0SGEA31FS200SGEA31FS300SGEA31FS350SGEA31FSZFRSGEA31FSZGR SGEA51FS200SGEA51FS300SGEA51FS350SGEA51FSZFRSGEA51FSZGR
SGEA01FS05MSGEA01FS05CSGEA01FS1C0SGEA21FS1C0SGEA31FS1C0
0.120.300.280.330.781.601.601.601.900.330.480.781.601.601.601.901.901.601.901.90
1:81:8 1:51:8 1:81:81:51:81:8 1:81:81:81:81:51:51:81:81:81:51:5
0.070.080.130.481.90
Half-coupling code
Half-coupling code
Dimensions
Aluminium SGEA
key
key
ø co
n.
key
De
De
øDe
De
L
L
L1
L1
ø
ø
key
key
Couplings27
Motor half-coupling
0.320.420.610.772.352.653.153.554.704.554.359.00
12.3012.0018.3017.7021.0020.6020.0019.0018.00
Weight [kg]IEC - Electric motors
63718090
100 - 112
132
160180
200
225
250
280
315
355400
Motor size Shaft end [d x l]
11x2314x3019x4024x50
28x60
38x80
42x11048x110
55x110
60x140
65x140
75x140
80x170
95x140100x210
Dimensions [mm]Half-coupling code
Pump half-couplings
SGEG01 *** ***SGEG30 *** ***SGEG40 *** ***SGEG60 *** ***SGEG80 *** ***SGEG90 *** ***
Half-coupling code
every 5 mm
All SGEG series half-couplings are supplied with a grub screw hole as standard, and with a grub screw UNI 5929 DIN 916 fitted to the hub.Note: For lengths other than those indicated in “Pump half-coupling” table, contact MP Filtri Technical and Sales Department.
SGEG Cast IronDimensions
Complete the half-coupling code with the shaft’s code and lengthExample: SGEG40PD02040
PD02 - see page 19040 - table “pump half-coupling - standard lengths”
Notes: - Screw included- Double key version only pump side
keykey
ø
øke
y
De
- 24 40 20 50 - 42 80 30 80 - 55 95 30 110 - 75 120 40 140 - 85 160 50 170 - 100 200 40 100
ø min ø max De L min L maxDimensions [mm]
De L ø key FG
Splined shaft
Standard lengths [mm]
Double key version
SGEG01M01021 SGEG01M02028 SGEG01M03040 SGEG01M04050 SGEG30M05060 SGEG40M05060 SGEG30M06080 SGEG40M06080 SGEG40M07110 SGEG40M08110 SGEG40M09110 SGEG60M09110 SGEG60M10140 SGEG60M11140 SGEG80M11140 SGEG80M12140 SGEG90M12100 SGEG80M13170 SGEG90M13100 SGEG90M15100 SGEG90M16100
44 21 11 4 M6 44 28 14 5 M6 44 40 19 6 M6 44 50 24 8 M6 80 60 28 8 M8 95 60 28 8 M8 80 80 38 10 M8 95 80 38 10 M8 95 110 42 12 M8 95 110 48 14 M8 95 110 55 16 M8 120 110 55 16 M8 120 140 60 18 M8 120 140 65 18 M8 160 140 65 18 M8 160 140 75 20 M10 200 100 75 20 M10 160 170 80 22 M10 200 100 80 22 M10 200 100 95 25 M10 200 100 100 28 M10
Couplings 28
Motor half-coupling
0.320.420.610.772.352.653.153.554.704.554.359.0012.3012.0018.3017.7021.0020.6020.0019.0018.00
Weight [kg]IEC - Electric motors
63718090
100 - 112
132
160180
200
225
250
280
315
355400
Motor size Shaft end [d x l]
11x2314x3019x4024x50
28x60
38x80
42x11048x110
55x110
60x140
65x140
75x140
80x170
95x140100x210
Dimensions [mm]Half-coupling code
Pump half-couplings
SGES01 *** ***SGES30 *** ***SGES40 *** ***SGES60 *** ***SGES80 *** ***SGES90 *** ***
Half-coupling code
every 5 mm
All SGES series half-couplings are supplied with a grub screw hole as standard, and with a grub screw UNI 5929 DIN 916 fitted to the hub.Note: For lengths other than those indicated in “Pump half-coupling” table, contact MP Filtri Technical and Sales Department.
Steel C40 SGESDimensions
Complete the half-coupling code with the shaft’s code and lengthExample: SGES40PD02040
PD02 - see page 19040 - table “pump half-coupling - standard lengths”
Notes: - Screw included- Double key version only pump side
keykey
ø
øke
y
De
- 24 40 20 50 - 42 80 30 80 - 55 95 30 110 - 75 120 40 140 - 85 160 50 170 - 100 200 40 100
ø min ø max De L min L maxDimensions [mm]
De L ø key FG
Splined shaft
Standard lengths [mm]
Double key version
SGES01M01021 SGES01M02028 SGES01M03040 SGES01M04050 SGES31M05060 SGES40M05060 SGES31M06080 SGES40M06080 SGES40M07110 SGES40M08110 SGES40M09110 SGES60M09110 SGES60M10140 SGES60M11140 SGES80M11140 SGES80M12140 SGES90M12100 SGES80M13170 SGES90M13100 SGES90M15100 SGES90M16100
44 21 11 4 M6 44 28 14 5 M6 44 40 19 6 M6 44 50 24 8 M6 80 60 28 8 M8 95 60 28 8 M8 80 80 38 10 M8 95 80 38 10 M8 95 110 42 12 M8 95 110 48 14 M8 95 110 55 16 M8 120 110 55 16 M8 120 140 60 18 M8 120 140 65 18 M8 160 140 65 18 M8 160 140 75 20 M10 200 100 75 20 M10 160 170 80 22 M10 200 100 80 22 M10 200 100 95 25 M10 200 100 100 28 M10
Couplings29
SGES*GO Steel C40
Motor half-coupling
95 50 38 10 M8 95 65 42 12 M8 95 65 48 14 M8 120 85 55 16 M10 120 85 60 18 M10 120 85 65 18 M10 120 85 75 20 M10 160 85 80 22 M10
SGES40M06050G0 SGES40M07065G0SGES40M08065G0SGES60M09085G0SGES60M10085G0SGES60M11085G0SGES60M12085G0SGES80M13085G0
4.005.005.008.008.008.008.00
13.00
Weight [kg]IEC - Electric motors
132160180200225250280315
Motor size Shaft end [d x l]
38x8042x11048x11055x11060x14065x14075x14080x170
Pump half-couplings
- 55 95 35 - 65 120 65 - 75 160 85
SGES40 *** ***SGES60 *** ***SGES80 *** ***
Half-coupling code
Complete the half-coupling designation with the pump interface code and the length.Example: SGES40PD02035GO (see page 19).
Dimensions
key
ø De
L
Dimensions [mm]Half-coupling code De L ø key Screw
ø min ø max De LDimensions [mm]
Splined shaft
Couplings 30
Spiders EGE
Version for extreme temperatures available on request.For further information, contact MP Filtri Technical and Sales Department.
EGE** series
15 40 16 18 65 25 22 80 35 26 105 45 24 95 40 28 120 55 38 160 75
SGEA01 - SGEG01SGEA21SGEA31 - SGEG30SGEA51SGEG40 - SGES40SGEG60 - SGES60SGEG80 - SGES80
0.0060.020.040.060.090.130.36
ø max Weight [kg]Nominal torque
NmDimensions [mm]
Half-coupling code E DeEGE0EGE2EGE3EGE5EGE4EGE6EGE8
Code
1095
190310310430
1250
Max torqueNm
20190380620620860
2500
EGE**RR series
15 40 16 18 65 25 22 80 35 26 105 45 24 95 40 28 120 55 38 160 75 48 200 95
SGEA01 - SGEG01SGEA21SGEA31 - SGEG30SGEA51SGEG40 - SGES40SGEG60 - SGES60SGEG80 - SGES80SGEG90
0.0060.020.040.060.090.130.360.59
ø max Weight [kg]Nominal torque
NmDimensions [mm]
Half-coupling code E DeEGE0RREGE2RREGE3RREGE5RREGE4RREGE6RREGE8RREGE9RP
Code
15115250400380550
14008900
Max torqueNm
30230500800760
110029009900
Dimensions
Notes: Made in polyurethane Laripur - LPR202-95A, red colour, are suitable for applications where high levels of torque are transmitted.
Notes: Made of black oil-resistant rubber, these components serve to interconnect the two halves (motor - pump) of a flexible coupling.
E
E
ø maxSplined with key
ø maxSplined with key
De
De
Couplings31
Metric cylindrical finish bore H7 Keyway to DIN 6885 sheet 1 (JS9)
01
21
31
40
51
60
80
90
Size Materials
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
8 3
9 3
10 3
11 4
12 4
13 5
14 5
15 5
15 4
16 4
16 5
16 5
17 5
18 6
19 5
19 6
20 5
20 6
22 6
22 8
22 5
246
24 8
25 8
25 7
01
21
31
40
51
60
80
90
Size Materials
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
95 25
30 10
30 8
32 10
32 8
35 10
35 8
38 10
40 12
42 12
45 14
48 14
50 14
52 16
55 16
60 18
63 18
65 18
70 20
75 20
8022
82 22
90 25
100 28
28 8
Half-coupling bore sizes
Diameter / Key [mm]
Diameter / Key [mm]
SGEA-SGEG-SGES
•
•
•
•
•
•
•
•
•
••
•
•
•
•
•
••
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
• •
•
•
•
• •
•
•
•
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
• •
•
•
•
•
•
•
•
• •
•
•
•
• •
•
•
•
• •
•
•
•
• •
•
•
•
•
•
•
••
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
• •
•
• •
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
•
••
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
•
••
•••
•
•
•
•
•
•
•
•
•
• •
•
• •
• • ••
•••
•
•
•
•
•
•
•
•
•••
•
•
•
•
•
•
•
•
•••
•
•
•
•
•
•
•
•
Couplings 32
Half-coupling bore sizes
Imperial cylindrical finish bore H7 Keyway to DIN 6885 sheet 1 (JS9)
01
21
31
40
51
60
80
90
Size Materials
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
11.11 3.18
12.7 3.18
13.45 3.18
15.87 4.76
15.87 3.97
17.46 4.76
19.02 3.17
19.05 4.76
19.05 6.35
22.22 4.76
22.22 6.35
22.22 4
25.4 6.35
25.4 4.76
26.94 4.76
28.58 6.35
01
21
31
40
51
60
80
90
Size Materials
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
AluminiumSteel
Cast IronAluminium
SteelCast Iron
31.75 6.35
31.75 7.94
34.94 7.94
38.1 9.52
41.27 9.52
41.6 12
44.45 11.11
47.63 12.7
50.8 12.7
53.94 12.7
60.33 15.88
60.33 12.7
73.03 19.05
85.73 22.23
92.07 22.22
28.58 7.94
Diameter / Key [mm]
Diameter / Key [mm]
SGEA-SGEG-SGES
•
•
•
•
•
•
•
•
•
•
•
•
•••
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
•••
•
•
•
•
•
•
•••
••
•
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
•••
•
•
•
•
•
•
•••
•••
•
•
•
•
•
•
•••
•
•
•
•
•
•
•
•
•
•
•
•
•••
•••
•••
•
•
•
•
•
•
•• •• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
•••
•
•
•
•
•
•
•••
•••
•
•
•
•
•
•
•••
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•••
••
•
•
Couplings33
SAE involute spline (angle 30°) - ANS.B.92.1.1970
Size Materials 916/32
1016/32
1116/32
1216/32
1316/32
1416/32
1516/32
2116/32
2316/32
2716/32
3316/32
4016/33
1412/24
1612/24
1712/24
138/16
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Diametral pitch
Size Materials 158/16
178/16
2024/48
2124/48
2324/48
2524/48
2624/48
2824/48
2924/48
3224/48
2340/80
3648/96
4148/96
4748/96
3332/64
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Diametral pitch
Half-coupling bore sizesSGEA-SGEG-SGES
• • • •• • • •
• •• •• •
• •
• • • •• • • •
• •• •• •
• •••
• • • • • •• • •
•
• • • •• • • •
• •• •• •
• ••• • •• •• • •• •
• •• •• • • •• • •
• •
• •• • • •
• •• •• •
• •••
• •• •• • • •• • •
• •
• • •
• •• •• •
• •••
• •• •• • • •• • •
• •
• • • •• • • •
• •• •• •
• ••
• • • •• • • •
• •• •• •
• •••
• • • • • •• • •
•
• • • •• • • •
• •• •• •
• ••• • •• •• • •• •
• •• •• • • •• • •
• •
• •• • • •
• •• •• •
• •••
• •• •• • • •• • •
• •
• • •
• •• •• •
• •••
• •• •• • • •• • •
• •
Couplings 34
Half-coupling bore sizes SGEA-SGEG-SGESSpline bores to DIN 5480
Size
Size
Materials
Materials
1318x1.25
2128x1.25
1420x1.25
2145x2
1430x2
2270x3
1432x2
2432x1.25
1635x2
2450x2
1737x2
2655x2
1825x1.25
2860x2
1838x2
2938x1.25
1840x2
3470x2
1842x2
3880x2
1860x3
01
21
31
40
60
80
90
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Size
Nr. of th - Size
• •
• • •• • •
•
• • •• • •
• • •
•
• • •• •• •• •
• •• •
•
•• •• •
•• •• • •• • •
• •
• • •• •• •• •
• • •• • ••
• •
• • •
••• • •• • •
•
• •
• • •• • •
•
• • •• • •
• • •
•
• • •• •• •• •
• •• •
•
•• •• •
•• •• • •• • •
• •
• • •• •• •• •
• • •• • ••
• •
• • •
••• • •• • •
•
Couplings35
Spline bores to DIN 5481
Size Materials 288x10
3010x12
3112x14
3215x17
3317x20
3421x24
3526x30
3638x34
4160x65
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Size
Spline bores to DIN 5482
Size Materials 9A17x14
8A15x12
10A18x15
12A20x17
13A22x19
14A25x22
15A28x25
16A30x27
17A32x28
18A35x31
19A38x34
20A40x36
21A42x38
23A48x44
22A45x41
24A50x45
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Size
Size Materials 25A52x47
26A55x50
27A58x53
28A60x55
29A62x57
30A65x60
31A68x62
32A70x64
33A72x66
34A75x69
35A78x72
36A80x74
37A82x76
38A85x79
39A88x82
01
21
31
40
60
80
90
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
SteelCast Iron
Nr. of th - Size
•
• • • • • •
• •• • •
•
•
••
•
• •• •
• • •• •
•
• • • • • •
• •• • •
• •• •• •• •• •• •• • •
• •• •• •• •• •• •• • •
• • •• • •
• • • • • •
•
• • •
•
• • •
•
• • • • • •
• •• • •
•
•
••
•
• •• •
• • •• •
•
• • • • • •
• •• • •
• •• •• •• •• •• •• • •
• •• •• •• •• •• •• • •
• • •• • •
• • • • • •
•
• • •
•
• • •
Half-coupling bore sizesSGEA-SGEG-SGES
Couplings 36
Couplings37
Couplings 38
Steel couplings
Couplings
SGDR series
Couplings39
SGDR
Technical data
Couplings: Steel C40Sleeve: Nylon PA66 Blue color
Gear couplings materials
- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Sleeve Nylon PA66: from -20 °C to +90 °CTemperature
Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
Special Applications
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Note
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110
C40 Carbon SteelIEC Electric Motorssize
GENERAL INFORMATION
IEC Electric motors
Shaft DIN 5480
Shaft ISO 3019-2
Shaft DIN 5481
Shaft ANSI B92. 1A 1976
Shaft DIN 5482
Couplings 40
SGDRGENERAL INFORMATION
Designation & Ordering code
Pump half-coupling
Size
Configuration example: SGDRSGDR
4255
28
HALF-COUPLING FOR SPLINED SHAFT
Bore size code
Length
PD02
040 See page 42
See page 19
PD02 04028
Pump half-coupling
Size
Configuration example: SGDRSGDR
4255
28
BLANK HALF-COUPLING
Without borePB
PB28
Pump half-coupling Configuration example: SGDRSGDR
HALF-COUPLING FOR PARALLEL SHAFT
Bore size code
Double key way (available combinations only)
Length
G02
2E
040 See page 42
See page 18 (Parallel shaft - double key only)
See page 18
2EG02 04028
Size
4255
28
Couplings41
SGDRDimensions
Notes: - Screw included- Double key version only pump side
Motor half-coupling
SGDR28M03040SGDR28M04040SGDR28M05040SGDR42M06042SGDR42M07042SGDR42M08042SGDR55M09060
0.50.50.51.01.01.02.5
Weight [kg]IEC - Electric motors
8090
100-112132160180200
Motor size Shaft end [d x l] De L ø key Fg19x4024x5028x6038x80
42x11048x11055x110
45454560606084
40404042424260
19242838424855
M6M6M6M8M8M8M8
Dimensions [mm]
Dimensions [mm]
Half-coupling code
Pump half-couplings
SGDR28*** SGDR42*** SGDR55***
Complete the half-coupling designation with the pump interface code and the length.Example: SGDR280PD02050 (see page 19).
0.51.02.5
Weight [kg]De L456084
404260
Half-coupling code
Splined shaft ø
ø
key key
L
FG
key
De
Double key version
688
10121416
Couplings 42
SGDRDimensions
Sleeve
De E
B B
Half-coupling code
EGR066PAEGR090PAEGR125PA
SGDR28SGDR42SGDR55
0.0500.1500.371
Weight [kg]De E B6690
125
385265
162227
CodeDimensions [mm]
Couplings43
Bell-Housing are used as connecting elements between IEC motors and wide range of hydraulic pumps available on the international market.
Made in Aluminiun die cast, they cover a range from IEC motor size 63 to IEC motor size 355.
They are available in six different styles:- LMG series for gear pumps- LMC series monobloc bell-housing- LDC series made in 2 pcs fixed by screws- LMS series able to reduce the noise- LDS series made in 2 pcs fixed by screws- MULTI-COMPONENTS made by 3 pcs for IEC motors from sizes 132 up to size 225, made by 2 pcs for IEC motors from size 250 up to size 355
For the Bell-Housing selection you require please see our on-line software at www.mpfiltri.com.
Bell-Housing 44
Bell-Housing
LMG
LMC - LDC
LMS - LDS
MULTI-COMPONENTS
GENERAL INFORMATION
51
63
71
79
46page
Bell-Housing45
GENERAL INFORMATION NOISE
THEORY AND DEFINITION OF NOISE
From a health and hygiene standpoint, noise can be defi ned as an unpleasant and undesirable sound, or an unpleasant and annoying or intolerable auditory sensation (noise being any sound phenomena that may be accompanied by sensations of disturbance and pain). By definition, acoustic phenomena are oscillatory in character, propagated in a fl exible medium and causing pressure variations at the points, and the areas adjacent to those points, through which they pass.
2 THEORY AND DEFINITION OF NOISE1 SOUND
Technically considered, certain elements must be present simultaneously for acoustic phenomena to occur:
- Sound source
- Transmission medium
- Receive
The electric motor and the pump, together with the drive coupling, are the SOURCE OF THE NOISE. The Bell-housing is the noise transmission MEDIUM.Depending on whether the monobloc bell-housing is a rigid or low noise type, there will be variations in the fl exible properties of the transmission medium. The acoustic phenomena are dissimilar in the two cases, given the differences in pressure variation and particle displacement.
MOTOR AND PUMP UNIT
Noise is a particularly pervasive problem so much so that there have been statutory regulations in place now for some years, designed to limit harmful occupational exposure. Many of the machines used in industry today are equipped with oil-hydraulic systems, which happen to be a major source of noise.
RECEIVER- Human ear
- Sound level meter
BELL-HOUSING
ELECTRIC MOTOR
PUMP
Bell-Housing 46
ASSEMBLY OF MOTOR AND PUMP UNIT
Low noise bell-housing will help to attenuate the transmission of vibrations and the emission of noise generated by the system.Self-evidently, however, the mere adoption of a low noise bell-housing will achieve little unless the motor and pump are correctly installed on the machine or on the tank of the hydraulic power unit.
Should be followed in order to achieve best possible results and correct installation:
1 MOTOR AND PUMP UNIT MOUNTED HORIZONTALLY ON OIL TANK LID
- The suction pipe attached to the pump must be rigid and fi tted using a resilient bulkhead flange of the FTA series, which helps to cushion the vibrations propagated between the pipe and the tank lid. If pipes need to be bent, the radius of curvature must be at least 3 times the pipe diameter. Do not use elbow fi ttings, as these will signifi cantly increase pressure losses.
- The pressure pipeline of the pump must be flexible and long enough to include bends with the minimum radius of curvature recommended by the manufacturer for the specifi ed operating pressure.
- The return pipeline running from the service to the fi lter must be fl exible. Where oil is returned directly to the tank of the hydraulic power unit through a rigid pipe, it is advisable to use a resilient bulkhead fl ange of the FTR series, which helps to cushion the vibrations propagated between the pipe and the tank lid.
- Anti-vibration devices (resilient mounts or damping rods) must be located under the feet of the electric motor or the PDM foot brackets, depending on the mounting position of the motor.
- The lids of hydraulic oil tanks must be sturdy enough to support the load they carry.
2 MOTOR AND PUMP UNIT MOUNTED HORIZONTALLY ON MACHINE
- As a matter of good practice, the oil tank and motor-pump unit should be mounted on a single supporting frame of strength suffi cient to support the load.
- If the hydraulic system is fi tted with a side-mounted fi lter, the suction pipeline to the pump must be flexible and long enough to include bends with the minimum radius of curvature recommended by the manufacturer.
- If the suction filter is not side mounted, the pipeline should be rigid and installed in conjunction with a compensating coupling.
- The pressure pipeline of the pump must be fl exible, and long enough to include bends with the minimum radius of curvature recommended by the manufacturer for the specifi ed operating pressure.
- The return pipeline running from the service to the fi lter must be fl exible. Where oil is returned directly to the tank of the hydraulic power unit through a rigid pipe, it is advisable to use a resilient bulkhead fl ange of the FTR series, which helps to cushion the vibrations propagated between the pipe and the tank lid.
- Anti-vibration devices (resilient mounts or damping rods) must be located under the feet of the electric motor or the PDM foot brackets, depending on the mounting position of the motor.
FINAL CONSIDERATION
For best results, in any event, the motor-and-pump unit should be incorporated into the hydraulic system in such a way that no one component is rigidly associated with another, resulting in the propagation of vibration, and consequently noise.
RECOMMENDED TIGHTENING TORQUES FOR MOTOR/PUMP FIXING ON THE BELL-HOUSING
M6M8M10M12M14
M16M18M20M22M24
10 N∙m15 N∙m50 N∙m84 N∙m135 N∙m
205 N∙m280 N∙m400 N∙m530 N∙m690 N∙m
Note: The above guidelines are indicative only and subordinate to the solutions adopted ultimately by design engineers.
Bell-Housing47
PCD
40
45.2
50
50.85657.15
60
62.7
63
657071.875
80
82.55
85
90
92
72.0088.9071.8080.0093.0060.0063.0093.0082.5076.00
106.4074.0098.5075.00
157.20100.00125.00
85.0080.0080.00
100.0085.0090.0090.0084.0088.90
102.00100.00103.20100.00100.00110.00140.00115.00100.00106.40130.00100.00113.00
95.00103.00110.00106.40105.00106.40146.00110.00106.40112.00105.00118.00112.00140.00145.00
M8M8M8M8
M10M5ø7M8M8M6ø11M10M6M6
M12M8M6M8M8ø8,5M10M8M8M8ø7
M10M10M8M8ø11M10M10M10M10M10M10M8ø8,5M12M8M8
M10M10M10M8
M12M10M10M8M8ø9ø9M8
M10
244224422424444244242444444424222242444444242222242244
191096120052053280057287050234212098147227231042043044051058062168271073289047139024045059061063064065067083087093104169242272060097254260284066134156163164088089
D Nr. holes CodeSpigot hole[mm] Type
GENERAL INFORMATION
Bell-housing with nr. 2 holes at pump interface, aligned with through holes at motor interface.
Valid configuration for bell-housing up to ø400
Valid configuration for bell-housingfrom ø450 to ø660
Bell-housing with nr. 4 holes at pump interface, aligned with thread holes at motor interface.
Bell-housing with nr. 2 holes at pump interface + 22.5° compared to through holes at motor interface.
Bell-housing with nr. 4 holes at pump interface + 22.5° compared to thread holes at motor interface.
“-”: configuration out of ISO & SAE Standard
Spi
got
hole
Spi
got
hole
Spi
got
hole
Spi
got
hole
PC
DP
CD
PC
DP
CD
PUMP INTERFACE CODES
---
ISO3019-2-50-B2----
SAE A-A 50-2------
ISO3019-2-63-B2-----
ISO3019-2-63-B4-----
ISO3019-2-80-B4ISO3019-2-80-B2
-------------
SAE A 82-2-----------
Bell-Housing 48
PCD
95
98.4
100
101.6
105
110
112
115116
120
125
127
130
115.00127.00125.00125.00125.00125.00125.00190.00125.00125.00140.00146.00126.00120.00160.00150.00161.50146.00127.00146.00127.00146.00175.00130.00200.00135.00145.00140.00140.00130.00180.00160.00210.00145.00150.00160.00160.00160.00180.00155.00160.00200.00181.20200.00180.00170.00161.50181.20161.50165.00150.00181.20165.00165.00
M8M10ø11M10M10ø11M5ø15ø13M12M12M12M10M8
M10M10M12M12M12M10M10M12M10M8
M10M10M12M12M10M10M12M14M16M10ø13M12ø13M12M16M10ø17M12M16M16ø20ø18M12M16M14ø11M12M16M12M14
444244444222244442424244444224422444422444244442444244
137131128023025031032038041071072075106122141150029070125159224076110154202219273074138264198084094155267026033079082102113114136200215237021080140054068085124135
D Nr. holes CodeSpigot hole[mm] Type TypePCD
130
135
140
150
152.4
160
162
165.1
175
177.8
180
200
203.2205
224
250
275
165.00160.00175.40180.00180.00165.00200.00165.00180.00185.00228.60228.60228.60217.50228.60228.60190.50200.00200.00200.00224.00200.00230.00185.00224.00230.00188.00317.35317.35229.00317.35200.00230.00350.00216.00350.00216.00216.00224.00216.00215.00230.00250.00250.00280.00230.50254.00240.00280.00280.00310.00315.00355.00355.00
M10M10M12M14M12M10M16ø11M16M16M16M18M18ø17M20M20M8
M16ø17M16M20M12M22M12M16ø22M12M20M24M20M18M12M18M24M12M24ø13M16M16M12M22M22M20ø22M24M12M14M16M20ø22M24M20M16ø18
444424442442442444422244444424442442444444442444444444
253151220077081157176223232069022090108118166192207027035091092107111152184228263143145201204153185146222203055078112132148226028095117214210133144205238282233281
D Nr. holes CodeSpigot hole[mm]
GENERAL INFORMATION
“-”: configuration out of ISO & SAE Standard “-”: configuration out of ISO & SAE Standard
PUMP INTERFACE CODES
---
ISO3019-2-100-B4ISO3019-2-100-B2
------------
SAE B 101-2-----------------
ISO3019-2-125-B4--
ISO3019-2-125-B2--------
SAE C 127-2------
---
ISO3019-2-140-B4--
ISO3019-2-140-B2-------
SAE D 152-2SAE D 152 -4
-ISO3019 - 2 -160 B4
--
ISO3019 - 2 -160 B2------
SAE E 165 - 4SAE E 165 - 2
----
SAE F 177 - 4-
SAE F 177 - 2--
ISO3019 - 2 -180 B4---
ISO3019 - 2 -200 B4-----
ISO3019 - 2 -224 B4--
ISO3019 - 2 -250 B4--
Bell-Housing49
Bell-Housing 50
IEC electric motor range from size 63 up to size 225
Bell-Housing
LMG series
Bell-Housing51
Technical data
- Bell-housing: Pressure die casting Aluminium- Center ring: Galvanized Steel- Gasket: Special paper - Guarnital
Materials
Modular bell-housing components compatible for use with: - Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fl uids
From -30 °C to +80 °CTemperature
Special Applications
Bell-Housing - IEC electric motor range from size 63 up to size 225
LMG
IEC 63 ø 140 - ø 11x23IEC 71 ø 160 - ø 14x30IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 110 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140
LMG140LMG160LMG200LMG200LMG250LMG250LMG300LMG351LMG351LMG400LMG450
3Bell-Housing
size 0.5 1 2European standard size
3.5 4IEC Motors
sizeGerman standard sizeZB ZF ZG
GENERAL INFORMATION
Note: For specifi c information see pages 58 ÷ 60 “Table of Combination”
IEC Electric motors
Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Note
Bell-Housing 52
LMG
Without centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft); motor mounting flange drilled with 4 clearance holes + 4 threaded holes.Used normally for vertically mounted motor and pump units with pump submerged in the oil tank.
With centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 4 clearance holes + 4 threaded holes. Normally used for motor and pump units mounted horizontally on the tank lid or on the machine for maximum ease of maintenance. With this type of mounting, in effect, the hydraulic pump can be removed without removing the motor. The half-coupling mounted to the shaft passes through the spigot hole.
Without centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 8 clearance holes. Used normally for vertically mounted motor and pump units with pump submerged in the oil tank, allows greater flexibility for directional positioning of the hydraulic pump inside the tank, according to constructional requirements.
With centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 8 clearance holes.Normally used for motor and pump units mounted horizontally on the tank lid or on the machine, offers maximum ease of maintenance and enables directional positioning of the pump. With this type of mounting, in effect, the hydraulic pump can be removed without removing the motor.The half-coupling mounted to the shaft passes through the spigot hole.
VERSIONS
LMG *** 4S LMG *** 4E
LMG *** 8S LMG *** 8E
Bell-Housing53
Designation & Ordering code
BELL-HOUSING LMG
Bell-Housing series and size
Product revision code
LMG140 LMG250Configuration example:
LMG251LMG141
LMG140 M 4EFS200 DI
M
Pump flange identification codeFS200 See page 55
Versions4S
8S4E
8E
4 through holes + 4 threaded holes, motor interface without coupling removal ring
8 through holes, motor interface without coupling removal ring4 through holes + 4 threaded holes, motor interface with coupling removal ring
8 through holes, motor interface with coupling removal ring
LMG300LMG160LMG350LMG161LMG351LMG200LMG400LMG201
LMG660
OptionsDI
SAAN
Pxx
Drain hole + inspection hole
Motor interface with clearance holesBlack anodized finish
Customer specification
Note:- Bell-Housings with DI options are supplied complete with threaded closure plug.- Bell-Housing with 4E/8E version are supplied with center ring mounted.- For product range codes see pages 58 ÷ 60
COMPLETE KIT (BELL-HOUSING & COUPLINGS)
Motors identification code
Size Size
Configuration example: AKA02 FS200 4EZ
Pump flange identification codeFS200 See page 55
Product revision codeZ
COUPLING KIT
Motors identification code
02 13
Configuration example:
4303
AKG02 FS200 Z
Pumps flange identification codeFS200 See page 55
44044505460748
180 B3-B563 B1471 B1480 B1490 B14100/112 B1411
12
63 B3-B571 B3-B5 80 B3-B5 90 B3-B5 100/112 B3-B5 132 B3-B5 160 B3-B5
Product revision codeZ
LMG
Size Size Size02 63 B3-B5 13
1603 71 B3-B5 1804 80 B3-B5 2005 90 B3-B5 2207 100/112 B3-B5 2611 132 B3-B5
12 160 B3-B5 43
180 B3-B5200 B3-B5225 B3-B5250 B3-B5280 B3-B5315 B3-B563 B14
44454648
71 B1480 B1490 B14100/112 B14
Versions4S
8S4E
8E
4 through holes + 4 threaded holes, motor interface without coupling removal ring
8 through holes, motor interface without coupling removal ring4 through holes + 4 threaded holes, motor interface with coupling removal ring
8 through holes, motor interface with coupling removal ring
LMG450LMG550
Bell-Housing 54
LMG
M6M6M6M6M6M8M8M10M10M10M12M10M12M12M8M8M10
FS05MFS05CFS100FS1M0FS1M0FS200FS25TFS300FS3M0FS3T0FS35MFS350FS4M0FS400FSZBRFSZFRFSZGR
22.022.025.430.030.036.550.850.850.850.860.060.363.563.532.080.0
105.0
Hole
05
1
2
3
3.5
4
Bosch
Pumpgroup
Spigothole
25.525.526.224.524.532.543.042.043.045.048.549.565.064.310.334.548.0
A66.066.072.073.073.096.0
128.0128.0128.0137.0148.0149.5196.0188.0
40.0100.0145.0
B--
52.056.056.071.598.598.598.598.5
127.0114.3142.8143.0
40.072.0
102.0
CPump flange
codeShafttype
parallelparalleltapered 1:8paralleltapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:5tapered 1:5tapered 1:5
6.07.09.7
12.013.917.222.222.222.222.225.625.633.333.3
9.816.925.2
2.02.02.43.03.0
3.2 - 44.04.04.04.0
4.76 - 5.04.76 - 5.06.35 - 7.06.35 - 7.0
2.03.05.0
Key Pump half-couplingcode
FS05MFS05CFS100FS1C0FS1M0FS200FS300FS300FS300FS300FS350FS350FS400FS400FSZBRFSZFRFSZGR
Key
d
Spigot hole Hole
dDimensions
Dimensions
Designation of pump flange and shaft
Bell-Housing55
LMG090LMG105LMG120LMG140LMG141LMG160LMG161LMG200LMG201LMG250LMG251 (*)
0.300.350.400.350.400.440.500.680.801.161.80
D1Weight
[kg]IEC - Electric motors
63 - B1471 - B1480 - B14
63 - B3/B563 - B3/B571 - B3/B571 - B3/B580 - B3/B590 - B3/B5
100-112 - B3/B5100-112 - B3/B5
Motor size Shaft end [d x l]11x2314x3019x4011x2311x2314x3014x3019x4024x5028x6028x60
Dimensions [mm]Bell-housing code
1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4”
6070809595
110110130130180180
7585
100115115130130165165215215
90105120140140160160200200250250
637484
100100110110135135185185
789
1313151518182222
---M8M8M8M8M10M10M12M12
6779 999
11111414
4040454050405045507070
D2 D3 D4 H1 H2 F P H3 D6On request
606787609570
1058795
105126
LMG
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Nr.4xP
Nr.4xFDrain Hole(on request)
Motorsize
Motorsize
Pumpsize
Pumpsize
(*) Shape valid for LMG 251
Dimensions
Bell-housing
0.15
Bell-Housing 56
LMG300LMG351LMG351
2.554.904.90
D1Weight
[kg]IEC - Electric motors
132160180
Motor size Shaft end [d x l]38x80
42x11048x110
Dimensions [mm]Bell-housing code
1”1”1”
230250250
265300300
300350350
235255255
233131
M12M16M16
141818
80100100
D2 D3 D4 H1 H2 F P H3 D6On request
145179179
LMG
Nr.4xP
Nr.4xFDrain Hole(on request)
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
ø10
Dimensions
Bell-housing
Bell-Housing57
LMGIEC Motors B3/5 - standard gear pumpIEC - Electric motors
Motor size
Shaft end [d x l]
Pump identification
code Bell-Housing code
Motor half-couplingcode
Spider code
Pump half-couplingcode
Complete coupling kit code
Components
FS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS100FS1C0FS1M0FSZBRFS200FSZFRFS25TFS300FS3M0FS3T0FS100FS1C0FS1M0FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350
63
71
80
90
100112
132
11x23
14x30
19x40
24x50
28x60
38x80
LMG140MFS05M4SLMG140MFS05M4SLMG140MFS1004S/4ELMG140MFS1M04S/4ELMG140MFS1M04S/4ELMG140MFSZBR4SLMG160MFS05M4SLMG160MFS05M4SLMG160MFS1004S/4ELMG160MFS1M04S/4ELMG160MFS1M04S/4ELMG160MFSZBR4SLMG200MFS05M4SLMG200MFS05M4SLMG200MFS1004S/4ELMG200MFS1M04S/4ELMG200MFS1M04S/4ELMG200MFSZBR4SLMG201MFS2004S/4ELMG201MFSZFR4SLMG200MFS05M4SLMG200MFS05M4SLMG200MFS1004S/4ELMG200MFS1M04S/4ELMG200MFS1M04S/4ELMG200MFSZBR4SLMG201MFS2004S/4ELMG201MFSZFR4SLMG250MFS1004SLMG250MFS1M04SLMG250MFS1M04SLMG250MFSZBR4SLMG250MFS2004S/4ELMG250MFSZFR4SLMG251MFS25T4ELMG251MFS3004ELMG251MFS3M04ELMG251MFS3T04ELMG300MFS1004SLMG300MFS1M04SLMG300MFS1M04SLMG300MFSZGR4SLMG300MFS2004S/4ELMG300MFSZFR4SLMG300MFS25T4S/4ELMG300MFS3004S/4ELMG300MFS3M04S/4ELMG300MFS3T04S/4ELMG300MFS35M4S/4ELMG300MFS3504S/4E
SGEA01M01019FG
SGEA01M02028FG
SGEA01M03048FG
SGEA21M03048FG
SGEA01M04048FG
SGEA21M04048FG
SGEA21M05055FG
SGEA31M06077FG
EGE 0
EGE 0
EGE 0
EGE 2
EGE 0
EGE 2
EGE 2
EGE 3
SGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1COSGEA01FS1MOSGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS100SGEA21FS1C0SGEA21FS1M0SGEA21FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS300SGEA21FS300SGEA21FS300SGEA21FS300SGEA31FS100SGEA31FS1C0SGEA31FS1M0 SGEA31FSZGR SGEA31FS200 SGEA31FSZFR SGEA31FS300 SGEA31FS300 SGEA31FS300SGEA31FS300 SGEA31FS350 SGEA31FS350
Complete kit code
Note:- For bell-housing dimensions see pages 56-57.- For coupling dimensions see “Half-couplings” section on pages 26-27.
TABLE OF COMBINATION
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
AKG02FS05MZAKG02FS05CZAKG02FS100ZAKG02FS1C0ZAKG02FS1M0ZAKG02FSZBRZAKG03FS05MZAKG03FS05CZAKG03FS100ZAKG03FS1C0ZAKG03FS1M0ZAKG03FSZBRZAKG04FS05MZAKG04FS05CZAKG04FS100ZAKG04FS1C0ZAKG04FS1M0ZAKG04FSZBRZAKG04FS200ZAKG04FSZFRZAKG05FS05MZAKG05FS05CZAKG05FS100ZAKG05FS1C0ZAKG05FS1M0ZAKG05FSZBRZAKG05FS200ZAKG05FSZFRZAKG07FS100ZAKG07FS1C0ZAKG07FS1M0ZAKG07FSZBRZAKG07FS200ZAKG07FSZFRZAKG07FS300ZAKG07FS300ZAKG07FS300ZAKG07FS300ZAKG11FS100ZAKG11FS1C0ZAKG11FS1M0ZAKG11FSZGRZAKG11FS200ZAKG11FSZFRZAKG11FS300ZAKG11FS300ZAKG11FS300ZAKG11FS300ZAKG11FS350ZAKG11FS350Z
Bell-Housing 58
Note:- For bell-housing dimensions see pages 56-57.- For coupling dimensions see “Half-couplings” section on pages 26-27.
LMGIEC Motors B3/5 - standard gear pump
IEC - Electric motors Motor size
Shaft end [d x l]
Pump identification
code Bell-Housing code
Motor half-couplingcode
Spider code
Pump half-couplingcode
Components
FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350FS200FS300FS3M0FS35MFS350FSZFRFSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGR
160
180
200
225
250
280
315
42x110
48x110
55x110
60x140
65x140
75x140
80x170
LMG351MFSZGR4SLMG351MFS2004SLMG351MFSZFR4SLMG351MFS25T4S/4ELMG351MFS3004S/4ELMG351MFS3M04S/4ELMG351MFS3T04S/4ELMG351MFS35M4S/4ELMG351MFS3504S/4ELMG351MFSZGR4SLMG351MFS2004SLMG351MFSZFR4SLMG351MFS25T4S/4ELMG351MFS3004S/4ELMG351MFS3M04S/4ELMG351MFS3T04S/4ELMG351MFS35M4S/4ELMG351MFS3504S/4ELMG400MFS2004ELMG400MFS3004ELMG400MFS3M04ELMG400MFS35M4ELMG400MFS3504ELMG400MFSZFR4SLMG400MFSZGR4SLMG450MFS3004ELMG450MFS3MO4ELMG450MFS35M4ELMG450MFS3504ELMG450MFSZGR4SLMG550MFS3004ELMG550MFS3MO4ELMG550MFS35M4ELMG550MFS3504ELMG550MFSZGR4SLMG550MFS3004ELMG550MFS3MO4ELMG550MFS35M4ELMG550MFS3504ELMG550MFSZGR4SLMG660MFS3004ELMG660MFS3MO4ELMG660MFS35M4ELMG660MFS3504ELMG660MFSZGR4S
SGEA51M07109FG
SGEA51M08109FG
SGEA51M09109FG
SGEG60M10110
SGEG60M11140
SGEG80M12140
SGEG80M13170
EGE 5
EGE 5
EGE 5
EGE 6
EGE 6
EGE 8
EGE 8
SGEA51FSZGRSGEA51FS200SGEA51FSZFRSGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FSZGRSGEA51FS200SGEA51FSZFRSGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FS200SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FSZFRSGEA51FSZGRSGEG60FS300SGEG60FS300SGEG60FS350SGEG60FS350SGEG60FSZGRSGEG60FS300SGEG60FS300SGEG60FS350SGEG60FS350SGEG60FSZGRSGEG80FS300SGEG80FS300SGEG80FS350SGEG80FS350SGEG80FSZGRSGEG80FS300SGEG80FS300SGEG80FS350SGEG80FS350SGEG80FSZGR
TABLE OF COMBINATION
Complete coupling kit code
Complete kit code
AKA12FSZGRZ4SAKA12FS200Z4SAKA12FSZFRZ4SAKA12FS25TZ4S/4EAKA12FS300Z4S/4EAKA12FS3M0Z4S/4EAKA12FS3T0Z4S/4EAKA12FS35MZ4S/4EAKA12FS3504ZS/4EAKA13FSZGRZ4SAKA13FS200Z4SAKA13FSZFRZ4SAKA13FS25TZ4S/4EAKA13FS300Z4S/4EAKA13FS3M0Z4S/4EAKA13FS3T04ZS/4EAKA13FS35MZ4S/4EAKA13FS350Z4S/4EAKA16FS200Z4SAKA16FS300Z4EAKA16FS3M0Z4EAKA16FS35MZ4EAKA16FS350Z4EAKA16FSZFRZ4EAKA16FSZGRZ4EAKA18FS300Z4EAKA18FS3M0Z4EAKA18FS35MZ4EAKA18FS350Z4EAKA18FSZGRZ4EAKA20FS300Z4EAKA20FS3M0Z4EAKA20FS35MZ4EAKA20FS350Z4EAKA20FSZGRZ4EAKA22FS300Z4EAKA22FS3M0Z4EAKA22FS35MZ4EAKA22FS350Z4EAKA22FSZGRZ4EAKA26FS300Z4EAKA26FS3M0Z4EAKA26FS35MZ4EAKA26FS350Z4EAKA26FSZGRZ4E
AKG12FSZGRZAKG12FS200ZAKG12FSZFRZAKG12FS300ZAKG12FS300ZAKG12FS300ZAKG12FS300ZAKG12FS350ZAKG12FS350ZAKG13FSZGRZAKG13FS200ZAKG13FSZFRZAKG13FS300ZAKG13FS300ZAKG13FS300ZAKG13FS300ZAKG13FS350ZAKG13FS350ZAKG16FS200ZAKG16FS300ZAKG16FS300ZAKG16FS350ZAKG16FS350ZAKG16FSZFRZAKG16FSZGRZAKG18FS300ZAKG18FS300ZAKG18FS350ZAKG18FS350ZAKG18FSZGRZAKG20FS300ZAKG20FS300ZAKG20FS350ZAKG20FS350ZAKG20FSZGRZAKG22FS300ZAKG22FS300ZAKG22FS350ZAKG22FS350ZAKG22FSZGRZAKG26FS300ZAKG26FS300ZAKG26FS350ZAKG26FS350ZAKG26FSZGRZ
Bell-Housing59
LMGIEC Electric motors B14 mountingIEC - Electric motors
Motor size
Shaft end [d x l]
Pump identification
code Bell-Housing code
Motor half-couplingcode
Spider code
Pump half-couplingcode
Components
FS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFR
63
71
80
90
100112
11x23
14x30
19x40
24x50
28x60
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
SGEA01M01019FG
SGEA01M02028FG
SGEA01M03048FG
SGEA21M03048FG
SGEA01M04048FG
SGEA21M04048FG
SGEA21M05055FG
EGE0
EGE 0
EGE 0
EGE 2
EGE 0
EGE 2
EGE 2
SGEA00FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS05MSGEA21FS05CSGEA21FS100SGEA21FS1C0SGEA21FS1M0SGEA21FSZBRSGEA21FS200SGEA21FSZFR
AKG43FS05MZAKG43FS05CZAKG43FS100ZAKG43FS1C0ZAKG43FS1M0ZAKG43FSZBRZAKG44FS05MZAKG44FS05CZAKG44FS100ZAKG44FS1C0ZAKG44FS1M0ZAKG44FSZBRZAKG45FS05MZAKG45FS05CZAKG45FS100ZAKG45FS1C0ZAKG45FS1M0ZAKG45FSZBRZAKG45FS200ZAKG45FSZFRZAKG46FS05MZAKG46FS05CZAKG46FS100ZAKG46FS1C0ZAKG46FS1M0ZAKG46FSZBRZAKG46FS200ZAKG46FSZFRZAKG48FS05MZAKG48FS05CZAKG48FS100ZAKG48FS1C0ZAKG48FS1M0ZAKG48FSZBRZAKG48FS200ZAKG48FSZFRZ
AKA43FS05MZ4EAKA43FS05CZ4EAKA43FS100Z4EAKA43FS1C0Z4EAKA43FS1M0Z4EAKA43FSZBRZ4EAKA44FS05MZ4EAKA44FS05CZ4EAKA44FS100Z4EAKA44FS1C0Z4EAKA44FS1M0Z4EAKA44FSZBRZ4EAKA45FS05MZ4EAKA45FS05CZ4EAKA45FS100Z4EAKA45FS1C0Z4EAKA45FS1M0Z4EAKA45FSZBRZ4EAKA45FS200Z4EAKA45FSZFRZ4SAKA46FS05MZ4EAKA46FS05CZ4EAKA46FS100Z4EAKA46FS1C0Z4EAKA46FS1M0Z4EAKA46FSZBRZ4EAKA46FS200Z4EAKA46FSZFRZ4SAKA48FS05MZ4EAKA48FS05CZ4EAKA48FS100Z4EAKA48FS1C0Z4EAKA48FS1M0Z4EAKA48FSZBRZ4EAKA48FS200Z4EAKA48FSZFRZ4S
TABLE OF COMBINATION
Note:- For bell-housing dimensions see pages 56-57.- For coupling dimensions see “Half-couplings” section on pages 26-27.
Complete coupling kit code
Complete kit code
Bell-Housing 60
LMGCENTER RING
GASKET
ANC01FS100ANC01FS1M0ANC02FS200ANC03FS200ANC03FS300ANC03FS350ANC04FS300ANC04FS350ANCA001ANCD005
D1Dimensions [mm]Center ring
code505072888888
115115
4285
25.430.036.536.550.860.350.860.322.050.8
1.01.02.02.02.52.53.53.51.02.5
D2 Thk.
Dimensions
Motor side gasket
LMG 120LMG 140LMG 160LMG 200LMG 250LMG 300LMG 350
D1Dimensions [mm]Bell-housing
size8496
110145190234260
100115130165215265300
120140160200250300350
1111111
D2 D3 Thk. Hole799
11141418
GUM P 120GUM P 140GUM P 160GUM P 200GUM P 250GUM P 300GUM P 350
Seals code
Pump side gasket
FS05MFS100FS1M0FS200FS300FSZBRFSZFR
PDDimensions [mm]Pump identification
code22.025.430.036.550.832.080.0
25.626.624.532.543.0
10.3534.5
66727396
12840
100
1111111
A B Thk. Hole6.56.56.58.5
10.58.59.0
GUP P001GUP P002GUP P003GUP P004GUP P005GUP P013GUP P014
Seals code
-52.456.071.598.540.072.0
808785
112148
75118
C H48676888
1186290
L
ANC01FS100ANC01FSM0ANC02FS200ANC03FS200ANC03FS300ANC03FS350ANC04FS200ANC04FS300ANC04FS350ANCA001ANCD005
LMG140Center ring
code LMG090 LMG105 LMG120Bell-Housing size
LMG160 LMG200 LMG250 LMG300 LMG350 LMG400 LMG450
Thk.
Thk.Thk. HoleHoleSpigothole
ACCESSORIES
Bell-Housing61
Bell-Housing 62
Bell-Housing
LMC/LDC seriesIEC electric motor range from size 80 up to size 355
Bell-Housing63
LMC/LDC
Technical data
- Monobloc bell-housing: Pressure die-cast aluminium alloy - Pump flange: Pressure die-cast aluminium alloy - Screws kit: Steel- Gaskets: Special paper (Guarnital) - Plug for inspection: Nylon
MaterialsFrom -30 °C to +80 °CTemperature
Bell-Housing - IEC electric motor range from size 80 up to size 355
GENERAL INFORMATION
Modular bell-housing components compatible for use with: - Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Special ApplicationsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Note
Bell-Housing 64
LMC/LDC
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170
LMC200LMC200LMC250LMC250LMC300LMC350LMC350LMC400LMC450LMC550LMC550LMC660
127-2(C)
Bell-Housing size 50-2
(A-A)82-2(A)
101-2(B)
Flange SAE J 744152-2
(D)165-2
(E)
IEC Motorssize101-4
(B)127-4
(D)152-4
(D)165-4
(E)
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170
LMC200LMC200LMC250LMC250LMC300LMC350LMC350LMC400LMC450LMC550LMC550LMC660
100B2-B4
Bell-Housing size 50
B2-B463
B2-B480
B2-B4
Flange ISO 3019-2125
B2-B4160
B2-B4
IEC Motorssize200
B2-B4
GENERAL INFORMATION
Range
Bell-Housing65
Bell-Housing series and sizeLMC200AFSJLMC200AFSW
LMC350AFSY
Configuration example:LMC350AFSULMC400AFSVLMC450AFSZLMC550AFSNLMC550AFSOLMC660AFSPLMC660AFSS
LMC250AFSM
LMC200AFSJ DI
LMC300AFSTLMC300AFSX
LMC250AFSQLMC250AFSR
Options
FGDP
DI
AN
Holes rotated through 45° in relation to standard positionDouble set of hole
Drain hole + inspection hole
Black anodized finish
LMC
Pump interface codes070 See page 48
PxxSA
Customer specificationClearance holes at motor interface
070
Designation & Ordering code
LMC/LDC MONOBLOC BELL-HOUSING
Note:- Bell-housings with DI options are supplied complete with threaded closure plug.- For customization features other than those indicated on this page, contact MP Filtri Technical and Sales Department.
Bell-Housing series and sizeLDC200AFRBLDC200AFRCLDC200AFRD
Configuration example:
LDC250AFRC
LDC200AFRB DI
LDC300AF5BLDC350AF6A
LDC300AFRCLDC300AF5A
LDC350AF6B
LDC400AF5BLDC400AF6A
LDC450AF6ALDC400AF6B
LDC450AF6B
LDC400AF5A
Options
FGDP
DI
AN
Holes rotated through 45° in relation to standard positionDouble set of hole
Drain hole + inspection hole
Black anodized finish
LDC
Pump interface codes070 See page 48
PxxSA
Customer specificationClearance holes at motor interface
070
Bell-Housing 66
LMCMONOBLOC BELL-HOUSINGDimensions
LMC200AFSJ***LMC200AFSW***LMC250AFSM***LMC250AFSQ***LMC250AFSR***LMC300AFST***LMC300AFSX***LMC350AFSY***LMC350AFSU***LMC400AFSV***
0.750.951.501.601.753.203.304.804.906.50
D1Weight
[kg]IEC - Electric motors
8090
110 - 112
132
160180200
Motor size Shaft end [d x l]19x4024x50
28x60
38x80
42x11048x11055x110
Dimensions [mm]Bell-housing code
3/4”3/4”3/4”3/4”3/4”3/4”3/4”1”1”
1 1/2”
130130180180180230230250250300
165165215215215265265300300350
200200250250250300300350350400
125125175175175230230240240280
100125114138159155170178194201
18181919192323313131
M10M10M12M12M12M12M12M16M16M16
608575
100120809595
115125
D2 D3 D4 D5 H1 H2 F H3 D6On request
135135186186186235235254254305
11111414141414181818
P Spigot hole
Minimum [mm]50505050508080508080
LMC450AFSZ*** LMC550AFSN***LMC550AFSO***LMC660AFSP***LMC660AFSS***
9.0015.0017.0027.0031.00
D1Weight
[kg]IEC - Electric motors
225250280
315
Motor size Shaft end [d x l]60x14065x14075x140
80x170
Dimensions [mm]Bell-housing code
1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”
350450450550550
400500500600600
450550550660660
320----
250265310295 325
3131353545
M16 M16M16M16M20
175175175175175
D2 D3 D4 D5 H1 H2 F H3 D6On request
350----
-----
P Spigot hole
Minimum [mm]80
100100100100
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xP Nr.4xF
Nr.8xFDrain Hole
(on request)
Motorsize
Motorsize
Pumpsize
Pumpsize
Spi
got
Hol
eS
pigo
tH
ole
ø10
ø10
Bell-Housing67
LDC200AFRB***LDC200AFRC***LDC200AFRD***LDC250AFRC***LDC300AFRC***LDC300AF5A***LDC300AF5B***LDC350AF6A***LDC350AF6B***LDC400AF5A***LDC400AF5B***LDC400AF6A***LDC400AF6B***
1.851.952.102.754.604.504.806.807.307.507.908.509.00
D1Weight
[kg]IEC - Electric motors
80
90
110 - 112
132
160180
200
Motor size Shaft end [d x l]19x40
24x50
28x60
38x80
42x11048x110
55x110
Dimensions [mm]Bell-housing code
3/4”3/4”3/4”3/4”3/4”3/4”3/4”1”1”
1 1/2”1 1/2”1 1/2”1 1/2”
130130130180230230230250250300300300300
165165165215265265265300300350350350350
200200200250300300300350350400400400400
125133158169185190181239252246234246260
18181819232323313131313131
M10M10M10M12M12M12M12M16M16M16M16M16M16
606075
100959595
115115125125125125
D2 D3 D5 H1 H2 F H3 D6On request
135135135186235235235254254305305305305
11111114141414181818181818
P Spigot hole
Minimum [mm]50505050508080808080808080
LDCDimensions
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xP
Nr.4xF
Motorsize Pump
size
Spi
got
Hol
e
MONOBLOC BELL-HOUSING
ø10
Bell-Housing 68
LDC450AF6A***LDC450AF6B***
11.2011.60
Weight [kg]
IEC - Electric motors
225
Motor size Shaft end [d x l]
60x140
Dimensions [mm]Bell-housing code
Spigot holeMinimum [mm]
8080
D11 1/2”1 1/2”
350350
400400
450450
295308
3131
M16M16
175175
D2 D3 D5 H1 H2 F H3 D6On request
350350
--
P
LDC
LMC200A*** LMC200A*** LMC250A*** LMC300A*** LMC350A*** LMC400A*** LMC450A*** LMC550A*** LMC660A***
MP Filtri code KTR code OMT code Hydrapp code Raja code
PK200/3/... PL200/8/... PL250/6/... PL300/4/... PK350/4/... PK400/4/... PK450/4/... PK550/4/... PK660/4/...
TH20A*** TH1*** TH2*** TH3*** TH4*** TH15*** TH18*** TH19*** TH20***
- HLC1 HLC3 HLC5 HLC8 HLC12 - - -
R200/99-115/... R200/120-135/... R250/120-135/... R300/155-170/... R350/173-194/... R400/194-210/... R450/250-210/... R550/250-210/... R660/250-210/...
Comparative table
Dimensions
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.8xF
Motorsize Pump
size
Spi
got
Hol
e
MONOBLOC BELL-HOUSING
Note:The above table is gudeline only. Not all bell-housings are fully interchangeble.
ø10
22.5° 22.5°
Bell-Housing69
Bell-Housing 70
Bell-Housing
LMS/LDS seriesIEC electric motor range from size 100 up to size 315
Bell-Housing71
LMS/LDS
Technical data
- Motor base bell-housing: Pressure die-cast aluminium alloy - Pump fl ange: Pressure die-cast aluminium alloy - Internal ring: Pressure die-cast aluminium alloy - Damping ring: Vulcanized aluminium + NBR 75 Shore A
MaterialsFrom -30 °C to +80 °CTemperature
Bell-Housing - IEC electric motor range from size 100 up to size 315
GENERAL INFORMATION
Modular bell-housing components compatible for use with: - Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fl uids
Special Applications Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Note
Bell-Housing 72
LMS/LDS
IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170
LMS250LMS250LMS300LMS350LMS350LMS400LMS450LMS550LMS550LMS660
127-2(C)
Bell-Housing size 50-2
(A-A)82-2(A)
101-2(B)
Flange SAE J 744152-2
(D)165-2
(E)
IEC Motorssize101-4
(B)127-4
(D)152-4
(D)165-4
(E)
IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170
LMS250LMS250LMS300LMS350LMS350LMS400LMS450LMS550LMS550LMS660
100B2-B4
Bell-Housing size 50
B2-B463
B2-B480
B2-B4
Flange ISO 3019-2125
B2-B4160
B2-B4
IEC Motorssize200
B2-B4
GENERAL INFORMATION
Range
Bell-Housing73
LMS/LDSDesignation & Ordering code
Bell-Housing series and size Configuration example: LMS250AFSA DI
Options
FGDP
DI
AN
Holes rotated through 45° in relation to standard positionDouble set of hole
Drain hole + inspection hole
Black anodized finish
LMS
Pump interface codes070
PxxSA
Customer specificationClearance holes at motor interface
070
Note:- Bell-housings with DI options are supplied complete with threaded closure plug.- For customization features other than those indicated on this page, contact MP Filtri Technical and Sales Department.
Bell-Housing series and size Configuration example: LDS250AFRA DI
Options
FGDP
DI
AN
Holes rotated through 45° in relation to standard positionDouble set of hole
Drain hole + inspection hole
Black anodized finish
LDS
Pump interface codes070
PxxSA
Customer specificationClearance holes at motor interface
070
See page 48
See page 48
LDS250AFRALDS250AFBB
LDS400AF6A
LDS450AF6ALDS550AF6ALDS660AF6ALDS250AFRE
LDS300AF5GLDS350AF5A
LDS300AFRBLDS300AFRC
LMS250AFSALMS250AFSB
LMS350AFSH
LMS400AFSL
LMS450AFSO
LMS400AFSM
LMS550AFSP
LMS550AFSS
LMS400AFSN
LMS550AFSR
LMS660AFST
LMS300AFSC
LMS350AFSFLMS350AFSG
LMS300AFSDLMS300AFSE
Bell-Housing 74
LMSDimensionsDimensions
LMS250AFSA***LMS250AFSB***LMS300AFSC***LMS300AFSD***LMS300AFSE***LMS350AFSF***LMS350AFSG***LMS350AFSH***LMS400AFSL***LMS400AFSM***LMS400AFSN***
LMS450AFSO***LMS550AFSP***LMS550AFSR***LMS550AFSS***LMS660AFST***
3.724.104.204.456.516.807.108.518.809.10
11.61
12.115.215.919.220.2
D1
D1
Weight [kg]
Weight [kg]
IEC - Electric motors
IEC - Electric motors
225
250
280315
100 - 112
132
160
180
200
Motor size
Motor size
Shaft end [d x l]
Shaft end [d x l]60x140
65x140
75x14080x170
28x60
38x80
42x110
48x110
55x110
Dimensions [mm]
Dimensions [mm]
Bell-housing code
Bell-housing code
3/4”3/4”3/4”3/4”3/4”1”1”1”
1 1/2”1 1/2”1 1/2”
1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”
180180230230230250250250300300300
350450450450550
215215265265265300300300350350350
400500500500600
250250300300300350350350400400400
450550550550660
128148155168194204228204228256240
255255270290305
1919232323313131313131
3131313142
M12M12M12M12M12M16M16M16M16M16M16
M16M16M16M16M20
7575808080959595
125125125
175176177178179
D2
D2
D3
D3
H1
H1
H2
H2
F
F
H3
H3
D6
D6
On request
On request
1414141414181818181818
-----
P
P
Spigot holeMinimum [mm]
Spigot holeMinimum [mm]
5050508080808080808080
8080808080
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xP
Nr.4xF
Motorsize
Pumpsize
Spi
got
Hol
eInspection Hole
Plastic threaded plug mounted(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.8xF
Motorsize
Pumpsize
Spi
got
Hol
e
ø10
ø10
Bell-Housing75
LDSDimensions
LDS250AFRA***LDS250AFRB***LDS250AFRE***LDS300AFRB***LDS300AFRC***LDS300AF5G***
LDS350AF5A***
LDS400AF6A***
3.974.104.704.754.856.70
8.10
10.00
D1Weight
[kg]IEC - Electric motors
100 - 112
132
160180
200
Motor size Shaft end [d x l]
28x60
38x80
42x11048x110
55x110
Dimensions [mm]Bell-housing code
3/4”3/4”3/4”3/4”3/4”3/4”
1”
1 1/2”
180180180230230230
250
300
215215215265265265
300
350
250250250300300300
350
400
158165173185188232
254
288
191919232323
31
31
M12M12M12M12M12M12
M16
M16
757575808080
95
125
D2 D3 H1 H2 F H3 D6On request
141414141414
18
18
P Spigot hole
Minimum [mm]505050508080
80
80
Dimensions
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xP
Nr.4xF
Motorsize
Pumpsize
Spi
got
Hol
e
ø10
Bell-Housing 76
LDS
LDS450AF6A***
LDS550AF6A***
LDS660AF6A***
14.10
17.20
23.00
D1Weight
[kg]IEC - Electric motors
225
250280
315
Motor size Shaft end [d x l]60x140
65x14075x140
80x170
DimensionsBell-housing code
1 1/2”
1 1/2”
1 1/2”
350
450
550
400
500
600
450
550
660
287
300
335
31
31
42
M16
M16
M20
175
176
179
D2 D3 H1 H2 F H3 D6On request
-
-
-
P Spigot hole
Minimum [mm]80
80
80
Dimensions
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.8xF
Motorsize Pump
size
Spi
got
Hol
e
LMS250A*** LMS300A*** LMS350A*** LMS400A*** LMS450A*** LMS550A*** LMS660A***
MP Filtri code KTR code OMT code Raja code
PK+D150/190PK+D150/190PK+D150/D190/D230/260PK+/D190/D230/260PK+/D190/D230/260D/D330PK+/D190/D230/260D/D330PK+/D190/D230/260D/D330
BS251***BS300***BS350***BS400***BS451***BS551***BS661***
R250***DFR300***DFR350***DFR400***DFR450***DFR550***DFR660***DF
Comparative table
Note:The above table is guideline only. Not all bell-housings are fully interchangeable.
ø10
Bell-Housing77
Bell-Housing 78
IEC electric motor range from size 132 up to size 355
Bell-Housing
MULTI-COMPONENTS
Bell-Housing79
MULTI-COMPONENTS
Technical data
- Base module: Pressure die-cast aluminium alloy- Pump flange: Aluminium alloy- Intermediate adapter: Aluminium alloy.- Screw kit: Steel- Gaskets: Special paper (Guarnital)
Materials
Modular Bell-Housing Components - IEC electric motor range from size 132 up to size 355
From -30 °C to +80 °CTemperature
GENERAL INFORMATION
Modular bell-housing components compatible for use with: - Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Special ApplicationsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Note
Bell-Housing 80
MULTI-COMPONENTS
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140
IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170IEC 355 ø 800 - ø 95x210
BMC200BMC200BMC250BMC250BMC300BMC350BMC350BMC400BMC450
BMT300BMT350BMT350BMT400BMT450BMT550BMT550BMT660BAD800
127-2(C)
127-2(C)
Bell-Housing size
Bell-Housing size
50-2(A-A)
50-2(A-A)
82-2(A)
82-2(A)
101-2(B)
101-2(B)
Flange SAE J 744
Flange SAE J 744
152-2(D)
152-2(D)
165-2(E)
165-2(E)
IEC Motorssize
IEC Motorssize
101-4(B)
101-4(B)
127-4(D)
127-4(D)
152-4(D)
152-4(D)
165-4(E)
165-4(E)
IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140
IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170IEC 355 ø 800 - ø 95x210
BMC200BMC200BMC250BMC250BMC300BMC350BMC350BMC400BMC450
BMT300BMT350BMT350BMT400BMT450BMT550BMT550BMT660BAD800
100B2-B4
100B2-B4
Bell-Housing size
Bell-Housing size
50B2-B4
50B2-B4
63B2-B4
63B2-B4
80B2-B4
80B2-B4
Flange ISO 3019-2
Flange ISO 3019-2
125B2-B4
125B2-B4
160B2-B4
160B2-B4
IEC Motorssize
IEC Motorssize
200B2-B4
200B2-B4
GENERAL INFORMATION
BMC
BMT
Bell-Housing81
Designation & Ordering code
Motor base series and size
Intermediate adapter series and size
BMC200A1001
AD60465
BMT300A0805 BMT550A21567
BMT400A1106 BAD800A2707
BMC200A1251
AD50385
BMT350A1105 BMT660A25067
BMT450A1406
Configuration example:
Configuration example:
BMC300A1551 BMC400A2016BMC300A1555 BMC450A2507BMC300A1705BMC350A1945BMC350A1946
BMC250A1141
AD60466
AD50467
BMC200A1001
AD60465
DI
AN
BMC250A1361
AD50386
AD60467
Options
Options
DIAN
AN
Drain hole + inspection holeBlack anodized finish
Black anodized finish
BMC
Pump interface codes070 See page 48
Pxx
Pxx
SACustomer specification
Customer specification
Clearance holes at motor interface
Pump flange series and size
Mounting kit code series and size
FR1023
KVG1
FR1025
KVG5
Configuration example:FP5026 FP6032 FP7052FP5032 FP6045 FP7066FP5035 FP6058 FP7069
FP5063 FP6086
FP5045 FP6070 FP7086
FP60101
FP5056 FP6082 FP70111
FP5091FP60110
FR1033
FR1040
KVG6
FP5026 AN070
FR1035
FR1079
KVG7
Options
FGDP
Holes rotated through 45° in relation to standard positionDouble set of hole
PxxAN
Customer specificationBlack anodized finish
See page 99
Options
MULTI-COMPONENTS
1
2
3
Bell-Housing 82
BMC / FLANGE FR1
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.4xP
Nr.4xF
Nr.4xM8
Motorsize
BMC200A1001BMC200A1251BMC250A1141BMC250A1361BMC300A1551
FR1023***FR1025***FR1033***FR1035***FR1040***FR1079***
H1
H1
Motor base code D1
2 Bolt 4 Bolt
D2 D3 D5Dimensions [mm]
Mounting kit
Available pump interface
H2 F PWeight
[kg]
Weight [kg]
130130180180230
D042 - S061 - S063 -S083 - S023 - S070 -S071 - S082 - S075S080 - S082 S023 - S070 - S071 - S072 -S074 S080 -S082S060 - S063 -S065--
S024 - S025 - S125 - S154S021 - S026 - S068 -S069S021 - S026 - S027-S098 - S227S031
165165215215265
200200250250300
135135186186235
100125114138155
232533354079
KVG1
1818191923
M10M10M12M12M12
1111141414
0.750.951.601.603.30
0.250.300.800.901.101.30
8090
100-112
132
19x4024x50
28x60
38x80
IEC - Electric motors
Pump flangecode
Motor size Shaft end [d x l]On request
See page 99
H3 D6607580
10095
3/4”3/4”3/4”3/4”3/4”
Pump flange code to be complete with available pump interfaceExample: FR1023S024
ø10
ø85
ø105
ø105 ø105
ø85
MULTI-COMPONENTS2
1
3
Bell-Housing83
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.4xP
Nr.4xF
Nr.4xM14
Motorsize
BMC300A1555BMC300A1705BMC350A1785BMC350A1945
FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***
H1
H1
Motor base code D1
2 Bolt 4 Bolt
D2 D3 D5Dimensions [mm]
Mounting kit
Available pump interface
H2 PFWeight
[kg]
Weight [kg]
230230250250
S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-
S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267
265265300300
300300350350
235235254254
155170178194
26323545566391
KVG5
23233131
14141818
M12M12M16M16
3.33.64.44.9
1.01.10.90.91.61.72.2
132
160180
38x80
42x11048x110
IEC - Electric motors
Pump flangecode
Motor size Shaft end [d x l]On request
See page 99
H3 D695
110100115
3/4”3/4”1”1”
Pump flange code to be complete with available pump interfaceExample: FP5026S023
BMC / FLANGE FP5
ø170ø170ø1
90
ø190
ø170
ø10
MULTI-COMPONENTS 2
1
3
Bell-Housing 84
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.4xP
Nr.4xF
Nr.4xM14
Motorsize
BMC350A1786BMC350A1946BMC400A2016
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
H1
H1
Motor base code D1
2 Bolt 4 Bolt
D2 D3 D5Dimensions [mm]
Mounting kit
Available pump interface
H2 PFWeight
[kg]
Weight [kg]
250250300
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
300300350
350350400
254254305
178194201
324558708286
101110
KVG6
313131
181818
M16M16M16
4.41.96.9
1.82.12.43.03.33.44.25.5
160180200
42x11048x11055x110
IEC - Electric motors
Pump flangecode
Motor size Shaft end [d x l]On request
See page 99
H3 D6100115125
1”1”
1 1/2”
Pump flange code to be complete with available pump interfaceExample: FP6032S021
BMC / FLANGE FP6
ø218
ø218 ø218
ø240
ø240
ø10
MULTI-COMPONENTS2
1
3
Bell-Housing85
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.8xF
Nr.4xM14
Motorsize
BMC450A2506
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
H1
H1
Motor base code D1
2 Bolt 4 Bolt
D2 D3 D5Dimensions [mm]
Mounting kit
Available pump interface
H2 PFWeight
[kg]
Weight [kg]
350
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
400 450 350 250
324558708286
101110
31 -M16 6.9
1.82.12.43.03.33.44.25.5
225 60x140
IEC - Electric motors
Pump flangecode
Motor size Shaft end [d x l]On request
H3 D6
175 1 1/2”
Pump flange code to be complete with available pump interfaceExample: FP6032S021
BMC / FLANGE FP6
KVG6See page
99
ø240
ø240
ø218
ø10
ø218ø218
MULTI-COMPONENTS 2
1
3
Bell-Housing 86
Inspection HolePlastic threaded plug mounted
(protection accordingto DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.8xF
Nr.4xM20
Motorsize
BMC450A2507
FP7052***FP7066***FP7069***FP7086***FP7111***
H1
H1
Motor base code D1
2 Bolt 4 Bolt
D2 D3 D5Dimensions [mm]
Mounting kit
Available pump interface
H2 PFWeight
[kg]
Weight [kg]
350
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
400 450 350 250
52666986
111
31 -M16 6.9
4.44.84.95.26.3
225 60x140
IEC - Electric motors
Pump flangecode
Motor size Shaft end [d x l]On request
H3 D6
175 1 1/2”
Pump flange code to be complete with available pump interfaceExample: FP7052S028
BMC / FLANGE FP7
KVG7See page
99
ø10
ø288
ø258
ø258 ø258
ø288
MULTI-COMPONENTS2
1
3
Bell-Housing87
BMT300
Flange
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
4 Bolt Version 2 Bolt Version
Nr.4xM12
Nr.4xø14
Nr.4xP Nr.4xP
Nr.8xø15
Motorsize
Motor baseinterface
Pump flangeinterface
FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
170 15
324558708286
101110
190
17
52666986
111
288 258 22
KVG5
KVG6
KVG7
BMT300A0805
Motor base code
Weight[kg]
1.95
11.10.90.91.61.72.2
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
See page 99
See page 99
See page 99
Pump flange code to be complete with available pump interfaceExample: FP6032S021
ø10
ø190
ø234
ø300
ø265
ø230
ø166
218240
1
3
MULTI-COMPONENTS 3
26323545566391
Bell-Housing 88
BMT300
Flange interface Motor base interface
AD50385Code Weight [kg]
1.00
AD50386Code Weight [kg]
1.25
AD50467Code Weight [kg]
1.90
Nr.4xM14
Nr.4xM16
Nr.4xM20
Nr.4xM14
Nr.4xM14
Nr.4xM14
ø170
ø218
ø258
ø166
ø166
ø166
ø190
ø240
ø190
ø190
ø190
ø288
2
MULTI-COMPONENTS 3
Bell-Housing89
BMT350
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request) Nr.4xM16
Nr.4xø18
Nr.8xø15
Motorsize
Motor baseinterface
FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
15
324558708286
101110
17
52666986
111
288 258 22
11.10.90.91.61.72.2
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP6032S021
Flange
4 Bolt Version 2 Bolt Version
Nr.4xP Nr.4xP
Pump flangeinterface
BMT350A1105
Motor base code
Weight [kg]
3.10
KVG5
KVG6
KVG7
See page 99
See page 99
See page 99
ø10
ø190
ø260
ø166
ø350
ø300
ø250
170190
218240
MULTI-COMPONENTS 3
1
3
26323545566391
Bell-Housing 90
BMT350
Flange interface Motor base interface
AD50385Code Weight [kg]
1.00
AD50386Code Weight [kg]
1.25
AD50467Code Weight [kg]
1.90
Nr.4xM14
Nr.4xM16
Nr.4xM20
Nr.4xM14
Nr.4xM14
Nr.4xM14
ø170 ø166
ø190
ø190
ø218 ø166
ø240
ø190
ø258 ø166
ø190
ø288
MULTI-COMPONENTS 3
2
Bell-Housing91
BMT400
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request) Nr.4xM16
Nr.4xø18
Nr.8xø15
Motorsize
Motor baseinterface
FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
15
324558708286
101110
17
52666986
111
288 258 22
11.10.90.91.61.72.2
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP6032S021
Flange
4 Bolt Version 2 Bolt Version
Nr.4xP Nr.4xP
Pump flangeinterface
BMT400A1106
Motor base code
Weight [kg]
4.90
KVG5
KVG6
KVG7
See page 99
See page 99
See page 99
ø10
ø240
ø300
ø208
ø400
ø350
ø300
1 1/2”
170190
218240
1
3
MULTI-COMPONENTS 3
26323545566391
Bell-Housing 92
BMT400
Flange interface Motor base interface
AD60465Code Weight [kg]
1.30
AD60466Code Weight [kg]
1.60
AD60467Code Weight [kg]
2.50
Nr.4xM14
Nr.4xM16
Nr.4xM20
Nr.4xM16
Nr.4xM16
Nr.4xM16
ø170
ø218
ø258
ø208
ø208
ø208
ø190
ø240
ø288
ø240
ø240
ø240
2
MULTI-COMPONENTS 3
Bell-Housing93
BMT450
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request) Nr.8xM16
Nr.8xø17.5
Motorsize
FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
15
324558708286
101110
17
52666986
111
288 258 22
1.01.10.90.91.61.72.2
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP6032S021
Flange
4 Bolt Version 2 Bolt Version
Nr.4xP Nr.4xP
Pump flangeinterface
BMT450A1406
Motor base code
Weight [kg]
5.00
KVG5
KVG6
KVG7
See page 99
See page 99
See page 99
ø10
ø240
ø350
1 1/4”
ø208
ø450
ø400
ø350
170190
218240
1
3
MULTI-COMPONENTS 3
26323545566391
Bell-Housing 94
BMT450
Flange interface Motor base interface
AD60465Code Weight [kg]
1.30
AD60466Code Weight [kg]
1.60
AD60467Code Weight [kg]
2.50
Nr.4xM14
Nr.4xM16
Nr.4xM20
Nr.4xM16
Nr.4xM16
Nr.4xM16
ø170ø208
ø190
ø240
ø218 ø208
ø240
ø240
ø258 ø208
ø288
ø240
2
MULTI-COMPONENTS 3
Bell-Housing95
BMT550
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xM20
Nr.4xM16
Nr.16xM16
Motorsize
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
324558708286
101110
17
52666986
111
288 258 22
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP6032S021
Flange
4 Bolt Version 2 Bolt Version
Nr.4xP Nr.4xP
Pump flangeinterface
BMT550A21567
Motor base code
Weight [kg]
8.80
KVG6
KVG7
See page 99
See page 99
ø258
ø218
ø550
ø500
ø450
ø240
ø288
ø450
ø10
218240
1
3
MULTI-COMPONENTS 2
1 1/2”
Bell-Housing 96
BMT660
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xM20
Nr.4xM16
Nr.16xM20
Motorsize
FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]
S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080
-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145
S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
324558708286
101110
17
52666986
111
288 258 22
1.82.12.43.03.33.44.25.5
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP6032S021
Flange
4 Bolt Version 2 Bolt Version
Nr.4xP Nr.4xP
Pump flangeinterface
BMT660A25067
Motor base code
Weight [kg]
12.00
KVG6
KVG7
See page 99
See page 99
ø258
ø218
ø660
ø600
ø550
ø240
ø288
ø10
ø550
218240
1
3
MULTI-COMPONENTS 2
1 1/2”
Bell-Housing97
Inspection HolePlastic threaded plug mounted
(protection according to DIN EN 292 part 2)“Safety of machines”
Drain Hole(on request)
Nr.4xM20
Nr.16xM20
Motorsize
FP7052***FP7066***FP7069***FP7086***FP7111***
H1 D1 D2 P 2 Bolt 4 BoltMounting
kitAvailable pump interface Weight
[kg]-S090 - S092 - S166-S091 - S092 - S117 - S166 - S091 - S092 - S117 - S145
S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184
52666986
111
288 258 22
4.44.84.95.26.3
Pump flangecode
Pump flange code to be complete with available pump interfaceExample: FP7052S028
Flange
4 Bolt Version 2 Bolt Version
Nr.4xø22 Nr.4xø22
Pump flangeinterface
BAD800A2707
Motor base code
Weight [kg]
31.00
KVG7See page
99
ø258
ø800
ø740
ø680
ø288
ø680
ø10
ø258 ø258
ø288
1
3
BAD800MULTI-COMPONENTS 2
1 1/2”
Bell-Housing 98
MOUNTING KIT
ø85.5ø105
ø132ø170
ø189.5
ø180ø218
ø239
ø205ø258ø287
KVG1
KVG5
KVG6
KVG7
Q.ty
Q.ty
Q.ty
Q.ty
Material
Material
Material
Material
Torque
Torque
Torque
Torque
144
144
144
14
PaperSteelSteel
PaperSteelSteel
PaperSteelSteel
PaperSteel
-200 Nm
-
-130 Nm
-
-90 Nm
-
-15 Nm
Item
Item
Item
Item
Description
Description
Description
Description
Components
Components
Components
Components
123
123
123
12
1
1
1
1
2
2
2
2
3
3
3
Gasket for auxiliary flange FP7 / AD7Screw T.C.E.I. M20x50 UNI-5931 8.8Washer Schnorr 20
Gasket for auxiliary flange FP6 / AD6Screw T.C.E.I. M16x35 UNI-5931 8.8Washer Schnorr 16
Gasket for auxiliary flange FP5 / AD5Screw T.C.E.I. M14x35 UNI-5931 8.8Washer Schnorr 14
Gasket for auxiliary flange FR1Screw T.C.E.I. M8x20 UNI-5931 8.8
MULTI-COMPONENTS
Bell-Housing99
The range of products is completed by a number of accessories, including:
DAMPING RINGS, intended mainly for use with motor-pump units positioned vertically and with the pump submerged in the oil tank.
FOOT BRACKETS, which serve to support the motor pump unit in the event that the selected electric motor does not have mounting feet.
DAMPING RODS, to be mounted under the electric motor feet or under the foot brackets.
CLEANING COVERS, facilitating the maintenance of oil tanks in hydraulic power units, without necessarily having to dismantle the unit.
ALUMINIUM TANKS of 10 litres capacity, allowing the assembly of a compact hydraulic power unit.
Accessories 100
Accessories
Damping rings
Foot brackets
Damping rods
Cleaning covers
Aluminium tanks
102
104
105
106
111
pageANM A
PDM A
MPDR PDMA - MPDR
OB
SE10
Accessories101
ACCESSORIES DAMPING RINGS
Positioned between the bell-housing motor flange and lid of the tank, they help to reduce the transmission of the vibrations and emission of noise generated by the system.
Damping rings provide a perfect hydraulic sealing actions by virtue of their special profile; damping rings are available for IEC electric motors from size 80 to size 315.
In order to warranty the application, to proceed with the calculation of the max weight and moment with the following formulas.
Values higher than those in the table could damage the product and couldn’t warranty the conformity of the application!
Permissible radial weight and bending load for damping rings
Example of assembly
Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
Special Applications- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Internal ring: pressure die-cast aluminium alloyExternal body: NBR 75 Shore A
Materials
From -30 °C to +80 °C
Temperature
Technical data
Code F perm [N] Mb perm [N∙m]
ANM A 200 ANM A 250 ANM A 300 ANM A 350ANM A 400ANM A 450 ANM A 550 ANM A 660
370720
1450360048006600
1300024000
3065
175740
1100160044009000
Legend of symbolF perm = ammissible load (N)Fp = pumps weight (N)Fm = motor weight (N)Mb perm = bending load (N∙m)
PUMP
TANK WALL
BELL-HOUSING
DAMPING RING
IEC ELECTRIC MOTOR
F perm ≥ Fp + Fm Mb perm ≥ Fm x l1 - Fp x l2
l1 l2
Accessories 102
DAMPING RINGS
Dimensions
Code IEC - Electric motors D1 SD2 F x P Nr. FD3Weight
[kg]Screw tightening torque
[N∙m]4045505850
M10x16M12x16 M12x16 M16x20M16x25
4+4
ANM A 200 ANM A 250 ANM A 300 ANM A 350ANM A 400
144191238260301
80, 90S / 90L100L / 112M132S / 132M
160L/160M, 180L/180M200L
200250300350400
165215265300350
1.702.532.153.954.60
234040
100100
Code IEC - Electric motors D1 SD2 F x P Nr. FD3Weight
[kg]Screw tightening torque
[N∙m]606067
M16x25 M16x25M20x25
8+8ANM A 450 ANM A 550 ANM A 660
352452552
225S / 225M250M, 280M / 280S
315M / 315S
450550660
400500600
6.207.7611.25
100210410
ACCESSORIES
ANM A 200 ÷ 400
ANM A 450 ÷ 660
Dimensions [mm]
Dimensions [mm]
Accessories103
ACCESSORIES FOOT BRACKETS
- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
Dimensions
P
P
R
R
L1
L1
Foot bracket
Foot bracket
H1
H1
R2
R2
B
B
H2
H2
L
L
B1
B1
R1
R1
L2
L2
S
S
H
H
D1
D1
F
F
Weight [kg]
Weight [kg]
360
180207262320
200
86115145170
200
8098
130160
220
100128157188
300
106128172210
30
16141818
30
14141620
30
13212125
261
111146191235
18
8.511.013.013.0
PDM A 350
PDM A 160 PDM A 200 PDM A 250 PDM A 300
350
160200250300
310
135175220270
300
130165215265
13
8.511.513.513.5
4.80
0.450.601.201.80
M16
M8 M10 M12 M12
Foot bracket: pressure die-cast aluminium alloyMaterials
From -30 °C to +80 °C
Temperature
Technical data
The foot brackets are proportioned to support IEC Electric motors with B5 flange without feet.
The range is available from size 71 to size 180.
Dimensions [mm]
Dimensions [mm]
Accessories 104
ACCESSORIES
Damping rods are element to reduce the transmission of the vibrations and emission of noise generated of the system.
Damping rods are available for IEC Electric motors from size 71 to size 315L and for MP FILTRI foot bracket
Dimensions
Damping rods for foot brackets PDMA series.
Damping rods for electrical motors UNEL-MEC
For foot brackets see page 104
Dimensions [mm]
Plate: steel black colourDamping element: NBR 60 Shore A
Materials
DAMPING RODS
Technical data
- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluids
From -20 °C to +80 °C
Temperature
Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by the MP Filtri Technical and Sales Department
Special Applications
8098
130160200
8888
15
2121242035
4040404560
5050505070
1212121215
M8M10M12M12M12
2525252535
2020202026
MPDR PDMA160MPDR PDMA200MPDR PDMA250MPDR PDMA300MPDR PDMA350
196196240280446
156156205245400
1414141414
1.51.52.02.58.0
90100100125140140178210254241279305286311349368419406457508
8888888
15151515151515151515151515
212224.52422202028283535353535505050606060
4040404040454560606060606060606060606060
5050505050505070707070707070
100100100120120120
1212121212121215151515151515151515151515
M6M8M8M8
M10M10M10M12M12M12M12M16M16M16M20M20M20M24M24M24
2525252525252535353535353535505050606060
2020202020202026262626333333333333333333
MPDR 71MPDR 80MPDR 90SMPDR 90LMPDR 100LMPDR 132SMPDR 132MMPDR 160MMPDR 160LMPDR 180MMPDR 180LMPDR 200LMPDR 225SMPDR 225MMPDR 250MMPDR 280SMPDR 280MMPDR 315SMPDR 315MMPDR 315L
196176196240240280280340416416446492492492492614614614614704
156146156205205245245300370370400430430445445570570570570660
1414141414141418181818222222222222222222
1.51.71.72.02.02.52.56.07.57.58.08.98.98.9
12.515.115.126.526.529.2
D
D
B1
B1
Code
Code
H1
H1
L2
L2
L
L
H2
H2
B
B
L1
L1
d
d
B2
B2
M
M
H
H
Weight [kg]
Weight [kg]
Accessories105
ACCESSORIES CLEANING COVERS
These pressure die-cast aluminium alloy doors offer superior mechanical strength and are manufactured to DIN 24339 standard. They provide easy access to the inside of the oil tank for inspection and cleaning purposes. On request and for small quantities, to be agreed with MP Filtri Technical and Sales Department, inspection doors can be supplied with: - Customer logo. - Hole cut for visual level indicator. - Hole cut for visual and electrical level indicator. - Oil sample plug
DimensionsOB275
OB400
Cleaning cover according to DIN 24339
Holes on the tank
Holes on the tank
Weight [kg]
1.761.761.761.76
Code Description
OB275P01 OB275P02 GU0275NBR GU0275VTN
Door with MP Logo Blank coverSeal Seal
Weight [kg]
2.902.902.902.90
Code Description
OB400P01 OB400P02 GU0400DINNBR GU0400DINVTN
Door with MP Logo Blank coverSeal Seal
Cleaning covers: pressure die-cast aluminium alloy / cast ironSeal: NBR 70 Shore A
Materials
From -30 °C to +80 °C
Temperature
Technical data
- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version
Compatibility with fluidsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department
Special Applications
ø400
ø380
240
ø250
240
Nr.8xø9
Nr.4xø11
18
17
ø300
ø195
Weight[kg]
Weight[kg]
2.062.062.062.06
3.203.203.203.20
Code
Code
Description
Description
Seal
Seal
OB275P01GN OB275P02GNOB275P01GV OB275P02GV
OB400P01GN OB400P02GNOB400P01GV OB400P02GV
Door with MP Logo Blank coverDoor with MP Logo Blank cover
Door with MP Logo Blank coverDoor with MP Logo Blank cover
NBRNBRFPMFPM
NBRNBRFPMFPM
Accessories 106
ACCESSORIESCLEANING COVERS
Dimensions
OB356
OB350
OB475
Holes on the tank
Holes on the tank
Holes on the tank
Weight [kg]
3.403.403.403.40
Code Description
OB475P01 OB475P02 GU0475DINNBR GU0475DINVTN
Door with MP Logo Blank coverSeal Seal
Weight [kg]
1.801.801.80
Code Description
OB350DIN000 GU0350DINNBR GU0350DINVTN
Door SealSeal
Weight [kg]
1.801.801.80
Code Description
OB356DIN000 GU0350DINNBR GU0350DINVTN
Door SealSeal
ø383
ø248
ø248
23
23
ø475
ø449
ø350
ø350
ø324
ø324
Nr.6xø12
Nr.6xø12
Nr.4xø12
25
Weight[kg]
Weight[kg]
Weight[kg]
2.102.102.102.10
2.102.102.102.10
3.703.703.703.70
Code
Code
Code
Description
Description
Description
Seal
Seal
Seal
OB350P01GN OB350P02GNOB350P01GV OB350P02GV
OB356P01GN OB356P02GNOB356P01GV OB356P02GV
OB475P01GN OB475P02GNOB475P01GV OB475P02GV
Door with MP Logo Blank coverDoor with MP Logo Blank cover
Door with MP Logo Blank coverDoor with MP Logo Blank cover
Door with MP Logo Blank coverDoor with MP Logo Blank cover
NBRNBRFPMFPM
NBRNBRFPMFPM
NBRNBRFPMFPM
Accessories107
ACCESSORIES CLEANING COVERS OPTIONSVisual level indicators LVA series
Transparent amorphous polyamide lens Nylon guard Seal: Series A-NBR - Series V-FPM
Materials
Mineral oilsSynthetic oilsWater base emulsionsPhosphoric esters
From -25 °C to +80 °COperating temperature
10 N∙m max. Tightening torque
Max 1 bar at +80°C Operating pressure
Technical data
Dimensions
Installation
Packaging
Size
Type
A[mm]
B[mm]
H[mm]
C[mm]
LVA 10 LVA 20 LVA 30
LVA...M10LVA...M12LVA...U38LVA...U12
76127254
M10M12
3/8” UNC1/2”UNC
114165292
10.512.510.013.5
Type Nr. pieces per pack
LVA 10
Fixing holesLVA...S LVA...T
A/F 638 23.5 19.5
A A19
B
19øc
H
Preparing for to fit the level on request
LVA 10**LVA 20**LVA 30**
OB275** OB350** OB356** OB400** OB475**• • • • •
• •• •• •
Indicator code
Accessories 108
ACCESSORIES
DimensionsOptional
SizeH 1
[mm]Weight
[kg]
LEG 102 LEG 200
103200
0.190.22
CLEANING COVERS OPTIONS
LEG series electrical level indicators are supplied with a 3-hole fixing flange and a reed switch having NC-NO contacts.
Designed typically for installation on the vertical walls of oil tanks, these instruments can also be mounted to inspection doors of the OB475 series as indicators of minimum and maximum oil levels in the tank.
To operate correctly, the float must be positioned vertically and at a minimum distance of 35 mm from walls made of ferrous metal. To change the contact from NC to NO, simply turn the float upside down. The electrical properties indicated are referred to resistive loads; for capacitive and inductive loads and incandescent lamps, use protection circuits.
Installation
Warning
- Flange: aluminum - Rod: brass - Float: nylon foam - Seals: A= NBR - V= FPM
DIN 43650 CONNECTOR
For temperatures outside this range, contact MP Filtri Technical and Sales Department
Materials
From -15 °C to +80 °CTemperature
Technical data
Electrical float level indicators LEG series
O-Ring seal
M4 - #8 UNCNr. 3 holes
52 70
H1
27
458
71
Ø30
Ø55
Ø42
Ø35
60°
Holes on the tank
Note: Prepared for visual indicator on request Min
Max
Min
Max
Layout of fixing holes for LEG level indicator
Note: Arrange the holes according to the position of the level indicator
nr. 3 holes M4
ø35
ø42
120°
Min
Max
Min
Max
Min Min
LEG 1 Float
Electrical symbol:
1: Common
2: Level
Note: to invert the contact status from NC to NO and vice versa, simply invert the float.
Accessories109
ACCESSORIES CLEANING COVERS OPTIONS
Available customization
Installation Dimensions
For ordering information codes, minimum order quantities, fixing hole positions and other details not indicated in this publication, contact MP Filtri Technical and Sales Department.
The nameplates applied to the new inspection door are identical to those applied to the old door.The difference with the new door is that nameplates are fixed with rivets.
Nameplate with customer logoOrdering information: OB475LOGOP05
Visual level indicators code LCPG42N...S
G 1 1/4”51
52
A/F
42
1411
Accessories 110
ACCESSORIES
Dimensions
ALUMINIUM TANKS
Made of pressure die-cast aluminium alloy, these tanks feature superior strength and optimum design and are ideal for compact hydraulic power units.
Generously proportioned fins ensure efficient cooling.
The tank is supplied with: - M6 threaded fixing holes for lid - feet with M8 threaded fixing holes - G 3/8” threaded drain hole
The lid is sealed by a gasket made of special paper, which must be ordered separately indicating code “GUS 10.0”.
Technical data
SE10LT Code Weight [kg]
4.0
112.
511
2.5
240
310
310 240
102
170250
114 Nr.12xM8
225207
G 3
/8”
95100 100
Accessories111
All data, details and words contained in this publication are provided for information purposes only.MP Filtri reserves the right to make modifications to the models and versions of the described products at any time
for both technical and / or commercial reasons.The colors and the pictures of the products are purely indicative.
Any reproduction, partial or total, of this document is strictly forbidden.All rights are strictly reserved.
112
mpfiltri.com
WORLDWIDE
TO PERFORM
NETWORK
PASSION
EN
- R
ev. 0
2-20
20C
MP
EN
001X
HEADQUARTERS
ITALFILTRI LLCMoscow - Russia+7 (495) 220 94 60 [email protected]
MP Filtri Canada Inc.Concord, Ontario - Canada+1 905 303 [email protected]
MP Filtri France SASVilleneuve la GarenneFrance+33 (0)1 40 86 47 [email protected]
MP Filtri Germany GmbHSt. Ingbert - Germany+49 (0) 6894 [email protected]
MP Filtri India Pvt. Ltd.Bangalore - India+91 80 4147 7444 / +91 80 4146 [email protected]
MP Filtri (Shanghai) Co., Ltd.Shanghai - Minhang District - China+86 21 58919916 [email protected]
MP Filtri U.K. Ltd.Bourton on the WaterGloucestershire - United Kingdom+44 (0) 1451 822 522 [email protected]
MP Filtri U.S.A. Inc.Quakertown, PA - U.S.A.+1 215 529 [email protected]
BRANCH OFFICES
MP Filtri S.p.A.Pessano con BornagoMilano - Italy+39 02 [email protected]