Post-Harvest Losses and Food Waste Research in Canada
Presentation to APEC Seminar on Strengthening Public-Private Partnership to Reduce Food Losses in the Supply Chain
August 2013
2
Food Losses and Waste Are An Important Element of Supporting Food Security• Much of the dialogue on food security has focused on
improving production and productivity
• However, mounting evidence suggests that the world supplies sufficient food, but 30-40% is lost or wasted– In developing nations, it is estimated that most food losses happen post-
harvest, between harvest and retail– In developed nations, it is estimated that most food waste is due to
consumer waste, much of this suitable for human consumption
• Reducing food losses and waste is an opportunity to increase the available supply of food
3
Reducing Food Losses in the Early Stages of the Food System
• Much of the attention on food losses and waste is centered around innovations in storage, transportation, infrastructure
• In addition to losses during storage, Canadian scientists have looked at means to reduce food losses at earlier stages of the food system – production and harvest, where scientists research 4 categories:
i. Intrinsic characteristics of the product that improves resiliency ii. Practices employed in the field and post-harvestiii. Additives that inhibit ripening and decay iv. Technology use
• Research related to losses in grains focuses primarily on the first, second and fourth of these categories
4
Intrinsic Characteristics of the Product
• Pre-harvest sprouting (PHS) in grain is caused when grains have reached maturity but are negatively affected by rains before harvest. PHS creates waste/losses by reducing grain yield and suitability for food processing. In Canada, this can result in about $100million in lost market value 3 out of 10 years.
• Scientists undertake genetic research on PHS-resistant characteristics in grains to pursue improved cultivars
• Scientists also study methods for measuring factors that contribute to PHS (e.g. dormancy)
Intrinsic Characteristics of the Product cont’d
• Disease and insect damage in grains can cause serious losses
• Grains with increased resiliency will result in reduced losses
• Breeding for resiliency against diseases and insects is on-going in Canada– Diseases: fusarium head blight and associated mycotoxin (DON), leaf and stem
rust, common bunt, crown rust, ergot, and leaf spot
– Insects: wheat stem sawfly, orange wheat blossom midge
5
Practices Associated with Storage
• Potentially cost-effective practices can be an important means to reduce food losses and waste during storage
• Examples of Canadian research:– Aeration of grain with air/liquid nitrogen to freeze insects – Use of microwaves to control beetles in grains and pulses– Use of short-wave near-infrared hyperspectral and digital
colour imaging to detect fungal damage, insect damage• One can calibrate inexpensive near-infrared apparatus for
specific characteristics
6
Inhibition of Ripening and Decay (associated with fruits and vegetables rather than grains)• Studies have been completed in preventing physical decay and
disease in fruits and vegetables – Use of 1-methylcyclopropene, ethylene, ozone, and antimicrobials
as possible ripening inhibitors.– Use of reflective tarps during harvest to extend life– Lactic fermentation and biological agents to delay decay
• The first option is particularly useful for fruits that are sensitive to chilling and might be broadened to sub-tropical and tropical fruits (e.g. banana, avocado, durian, guava, jackfruit, mango, etc.)
• The second 2 options could be of significant importance in hot climates
7
Use of Cost-Effective Technology
• Some technologies can dramatically reduce food losses and waste and can be quite cost-effective
– Use of instruments to detect insects, moulds and mycotoxins (traps, odour detection)
– Weather-tight bins to keep grain dry
– Aeration after harvest to dry and cool grains
– Use of “sensor arrays” to identify specific sources of spoilage (Temperature and moisture sensors will soon be developed as well as nanosensors for odours)
8
Public – Private Partnerships
• At Agriculture and Agri-Food Canada (AAFC), funding programs are available to support collaborations between AAFC scientists, other public agencies and the private sector
• For example, industry-based organizations, like the Canola Council and Western Grains Research Foundation can partner with universities and AAFC to research topics that will lend to reduction of losses and waste
• This approach can be effective in meeting industry goals by capitalizing on the strengths within each sector
9
Conclusions
• When discussing food losses and waste, we need to look at a broader spectrum of possible options (e.g. more resilient varieties) rather than just post-harvest
• Canadian scientists have concluded that improvements to production, harvest, and storage processes can help to reduce waste and post-harvest losses
• This research is adaptable to production systems in both developing and developed economies
• Public – private partnerships, through funding programs, can be effective in the development of innovative ways to reduce losses
10
For Further Information
• Canadian scientists working in both grains and horticulture fields would be happy to discuss their post-harvest and resiliency work with you in greater detail
• For more information on scientists working these fields, please contact:
Diane LivingstonEmail: [email protected] Telephone: 1 (306) 523-6568
11