Development of an ARB Classic Canopy to suit the all new Toyota Hilux SR dual cab is now complete.
The ARB canopy compliments the commercial design of the new Hilux SR, available as a standard height roof version in either Smooth or Textured exterior finish. Customers may choose from our side sliding window or side lift up window configurations, which are positioned low on the canopy shell to maximise the access into the cargo area.
The front canopy window is available in a lift up configuration to allow maximum rearward vision and easy access to clean the vehicle cabin rear glass. A flat glass door manufactured from grey tinted and tempered safety glass to EC43R standards has been designed to complement the new tailgate. Each rear door is fitted with a high mount LED stop lamp, a forward facing interior light and specially selected gas assist struts with low opening force (160N) suitable for a climate range of -30°C to 80°C.
PRODUCT RELEASE
Toyota Hilux SR Oct 2015 on - ARB Classic Canopy 1 - 4
Product Specification
PRODUCT RELEASE
Product Specification
Date: February 2016
Description: ARB Classic Canopy
Application: Toyota Hilux SR Oct 2015 on
Part No. : See Table
Price: See Table
Product Group: 125 - ARB HD Smooth Canopies 135 - ARB Canopies
Fitting: 2.5 Hours
ARB’s unique laser cut steel mount system is bolted directly to the existing vehicle hard points located at the front and rear of the vehicle tub to form a solid foundation for the canopy.
An ARB ‘under rail’ ute liner (part# KUL2579) has been designed specifically to suit Hilux SR canopy installations which require minimum modifications to allow for sufficient clearance around the canopy brackets.
ARB canopy shells are made from a special co-extruded ABS plastic for strength and durability. The ABS is inert and with suitable venting is safe for the transportation of animals. As a recyclable material we have the opportunity to reduce the amount of landfill at end of product life. The heavy duty painted smooth canopy blends with the smooth surface of the vehicle whilst the economical alternative is the white textured surface canopy with UV capping where painting is optional. Shell surface configurations are captured in our unique part numbers - Refer to Canopy part number table below.
For trade and lifestyle customers, we are thrilled to offer our standard side windows with the large 278mm opening to access the cargo area for a vast array of tools or camping equipment. Window combinations are captured in our unique part numbers - Refer to Canopy part number table below.
Part # Shell style Window Combination
CLS60A Smooth Canopy 2 sliding side windows
CLS60B Smooth Canopy LH lift up, RH sliding
CLS60C Smooth Canopy 2 lift up side windows
CLS60D Smooth Canopy RH lift up, LH sliding
CL60A Textured Canopy 2 sliding side windows
CL60B Textured Canopy LH lift up, RH sliding
CL60C Textured Canopy 2 lift up side windows
CL60D Textured Canopy RH lift up, LH sliding
Toyota Hilux SR Oct 2015 on - ARB Classic Canopy 2 - 4
Toyota Hilux SR Oct 2015 on - ARB Classic Canopy 3 - 4
Installation:
For those familiar with ARB canopies, the new Toyota Hilux SR canopy is fitted in the same traditional way as per previous classic canopies.
Technical Specifications:Fitting instructions and spare parts lists are available on www.sellarb.com.au.
Canopy Part Number
Roof A�(mm)
B(mm)
C(mm)
D(mm)
C/L/S60 Standard 1640 1605 480 550
Stated dimensions are external canopy measurements in “mm”. Acceptable manufacturing variation to these nominal dimensions may occur. Dimension “C” is the internal measurement.
A� B
C D
Toyota Hilux SR Oct 2015 on - ARB Classic Canopy 4 - 4
Accessories:A new internal frame kit has been made specifically to suit the new Hilux SR dual cab canopy. The ARB in-ternal frame kit is rated to carry up to 100kg load evenly spread over the roof bar system (e.g. the roof cage and its contents must not exceed this rating).
To accommodate vehicles fitted with OE cabin rails there are 2 channel bar mount kits available.
In order to align the canopy roof rack with the contour lines of the cabin roof, additional front rack mounts have been designed and are required when fitting an ARB trade rack.
Designated Thule roof bars have a design load rating of 100kg for a 2 bar system. Either Thule GL760 (108cm) or GL860 (108cm) can be used and have been designed to align with either cabin gutter mounts or track mounts.
To reduce dust ingress we highly recommend the fitment of the ARB slimline vent to pressurise the tub when driving on dusty roads.
A�ccessory Description Standard or Option A�RB Part NumberCanopy Vent Slimline Option 4700010
Internal frame set for roof bars/rack 3 Option 4114120
Roof rack mounts 2 Option 4114094
Canopy roof rack 1850 x 12502 ALLOY Option 4900140M
Canopy roof rack 1850 x 12502 STEEL Option 4000020
Canopy roof rack 1850 x 11202 ALLOY Option 4900130M
Canopy roof rack 1850 x 11202 STEEL Option 4000010
Roller for Steel Canopy roof rack Option 3700300
Roof Bars Professional (Thule) 3 Option 1 x GL860 (2 pack)
Roof Bars Square (Thule) 3 Option 1 x GL760 (2 pack)
Roof Bar Mount kit Suit Track Mount 3 Option 4114070
Roof Bar Mount Kit Suit Gutter Mount 3 Option 4114080
Sports lid Option TBA
Fly Screen (suit sliding windows) Option 6600021L/R
Screen - side window slider– full width Option 6600035
Screen - side window slider– open section only Option 6600034
Screen - front window lift up Option 6600037
2 Components indicated with this reference are required to complete a full canopy roof rack installation.3 Components indicated with this reference are required to complete a full roof bar installation.
Caution: The canopy is NOT rated to carry loads directly on the roof top without an approved rack system. The rear door is recommended to remain in the closed position during transit.