PlayStation 3 Super Slim Laser UnitReplacement
How to disassemble and change the Laser Unit.
Written By: ZFix
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8
INTRODUCTION
How to disassemble and change the Laser Unit.
[video: https://www.youtube.com/watch?v=qXvM_xy4kKU]
TOOLS:Phillips #00 Screwdriver (1)Metal Spudger (1)
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8
Step 1 — Laser Unit / Deck replacement
Turn off the console anddisconnect all cables.
Step 2
You must remove the warranty sticker and 4 screws.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8
Step 3
After removing HDD bay cover, you will see another 3 screw.
Step 4
Push there to release and remove upper back bezel.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8
Step 5
The upper front bezel is harder to remove.
Step 6
Remove 7 screws to release top cover.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8
Step 7
Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the smallcable and then take out the Power Supply Unit.
Step 8
To release the laser unit disconnect this flex-cable.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8
Step 9
One flex-cable, for rubbers and the metal bezel.
Step 10
Disconnect this flex-cable and attach it to the new spare part. Let's start assembling.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8
To reassemble your device, follow these instructions in reverse order.
Step 11
Assembling, assembling...
Step 12
Let's test the device before fully assembling it.
PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -
This document was generated on 2019-09-20 05:45:04 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8