Download pdf - Packers Catalog SCHLUMBERGER

Packers Catalog

Set, seal, and retrieve with confidence

1

Table of ContentsConventional Packers ................................................................................................................................05

ESP/Dual Completion Packers ................................................................................................................35

High-Rate-Gas Packers ............................................................................................................................43

HPHT Packers ..............................................................................................................................................47

Intelligent Completion Packers ...............................................................................................................51

Sand Control Packers ................................................................................................................................57

Service Packers ..........................................................................................................................................67

Swellable Packers ......................................................................................................................................79

Thermal Packers .........................................................................................................................................85

Accessories ..................................................................................................................................................87

3

Conventional Packers

5

APPLICATIONS Vertical, deviated, or horizontal wellbores Permanent production or isolation packer High-temperature, high-pressure

hostile environments

BENEFITS Positive set of slips and elements are

provided by twin-piston design Packer may be set on workstring to

facilitate completion options

FEATURES 360, one-piece, opposing-slip design Full tubing bore-through packer

and stinger Reduced-OD latching head Ability to install wellhead before the

packer is set Twin-piston setting Ability to convert to a temporary

bridge plug Lower slips and upper slips independently

set to eliminate tubing movement

The field-proven HSP-1 conventional sealbore packer has been used for many years in high-risk, harsh-environment wells. The packer forms part of the tubing string.

Main features Hydraulic-set Permanent For use in conventional completions Designed and tested in accordance with ISO 14310 V0 standards

Opposing-slip designThis packers design incorporates two full-circumference slips supported by two opposing tapered cones with a sealing element assembly positioned between them. The slips and sealing element assembly are sequentially set and held in position by a positive lock mechanical ratchet. The lower slip is set before the sealing element assembly to eliminate tubing movement and centralize the packer in the casing before the element fully packs off against the casing wall. The slips are designed to split into multiple segments upon setting and yield a full 360 grip on the casing.

High-performance sealingThe high-performance sealing element features metallic antiextrusion rings positioned above and below the sealing element. These antiextrusion rings provide a positive metal-to-metal interference fit with the casing to prevent seal extrusion and provide a reliable packoff.

HSP-1 series packers are available for a variety of service applications, including high H2S and CO2 exposure.

HSP-1Conventional sealbore packer

HSP-1 conventional sealbore packer.

6

Other company, product, and service names are the properties of their respective owners.Copyright 2014 Schlumberger. All rights reserved. 14-CO-0161

HSP-1

slb.com/packers

HSP-1 Conventional Sealbore Packer Specifications

Casing Size, in [mm]

Casing Weight Range, lbm/ft [kg/m]

Max. OD, in [mm]

Nominal ID, in [mm]

Upper Sealbore, in [mm]

4.500 [114.3] 9.516.6 [14.1424.70] 3.562 [90.5] 1.937 [49.2] 2.625 [66.7]5.000 [127.0] 11.518.0 [17.1126.79] 4.276 [99.9] 1.937 [49.2] 2.750 [69.9]5.500 [139.7] 9.013.0 [13.3919.35] 4.875 [123.8] 1.937 [49.2] 2.750 [69.9]5.500 [139.7] 13.023.0 [19.3534.23] 4.375 [111.1] 1.937 [49.2] 2.750 [69.9]6.625 [168.3] 17.024.0 [25.3035.72] 5.375 [136.5] 2.375 [60.3] 3.500 [88.9]6.625 [168.3] 24.032.0 [35.7247.62] 5.375 [136.5] 2.875 [73.0] 3.750 [95.3]7.000 [177.8] 17.032.0 [25.3047.62] 5.875 [149.2] 2.500 [63.5] 3.500 [88.9]7.000 [177.8] 17.032.0 [25.3047.62] 5.875 [149.2] 2.875 [73.0] 3.750 [95.3]7.000 [177.8] 17.032.0 [25.3047.62] 5.875 [149.2] 3.375 [85.7] 4.250 [108.0]7.000 [177.8] 23.032.0 [34.2347.62] 5.875 [149.2] 3.937 [99.9] 4.690 [119.1]7.625 [193.7] 20.039.0 [29.7658.04] 6.375 [161.9] 2.375 [60.3] 3.500 [88.9]7.625 [193.7] 20.039.0 [29.7658.04] 6.375 [161.9] 2.875 [73.0] 3.750 [95.3]8.625 [219.1] 24.049.0 [35.7272.92] 7.250 [184.2] 3.875 [98.4] 5.375 [136.5]9.625 [244.5] 29.358.4 [43.6086.91] 8.187 [207.9] 2.875 [73.0] 3.750 [95.3]9.625 [244.5] 29.358.4 [43.6086.91] 8.187 [207.9] 3.875 [98.4] 5.375 [136.5]9.625 [244.5] 29.358.4 [43.6086.91] 8.187 [207.9] 4.750 [120.7] 6.000 [152.4]9.625 [244.5] 47.0 [69.94] 8.438 [214.3] 6.000 [152.4] 7.250 [184.2] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

7

APPLICATIONS High-pressure, high-volume production,

injection, or disposal wells Highly deviated wells

ADVANTAGES Rated for 10,000 psi [68,947 kPa] at

350 degF [175 degC] One-trip setting capability Hydraulic or coiled tubing setting Full-circle slips to minimize casing

damage Lower slips secured to packer mandrel with

threaded connection Available alternative bore Optional bottom sub configuration to

accommodate pumpout plugs, sealbore extensions, millout extensions, and tubing

The Hydraperm conventional sealbore packer utilizes a single-element system and full-circle slips to perform in a wide range of casing weights while minimizing casing damage. This one-trip-capable packer is ideal for high-pressure, high-volume production, injection, or disposal wells. It is particularly suited for highly deviated wells where tubing manipulation is difficult and wireline operations are unsuitable.

Main features Hydraulic-set Permanent For use in conventional completions

Ratings and settingsThe Hydraperm packer is rated to 10,000 psi [68,947 kPa] at 350 degF [175 degC] and can be set on coiled tubing. The optional bottom sub configures to accommodate pumpout plugs, sealbore extensions, millout extensions, tubing, or other completion accessories.

HydrapermConventional sealbore packer

Hydraperm conventional sealbore packer.

8

HydrapermHydraperm Conventional Sealbore Packer Specifi cationsCasing Size,in [mm]

Casing Weight Range,lbm/ft [kg/m]

Casing ID,Min., in [mm]

Casing ID,Max., in [mm]

Tool Size, in [mm]

Tool OD, Max., in [mm]

Standard Tool Sealbore, in [mm]

Alternative Tool Sealbore, in [mm]

7 [177.8] 26.0032.00 [38.6947.62] 6.094 [154.79] 6.276 [159.41]5840 [1,473.21,016] 5.870 [149.10] 4.000 [101.60] 4.750 [120.65]

7 [177.8] 17.0020.00 [25.3029.76] 6.456 [163.98] 6.538 [166.07]6140 [1,549.41,016] 6.182 [157.02] 4.000 [101.60] 4.750 [120.65]

9.625 [244.48] 47.0058.40 [69.9486.91] 8.435 [214.25] 8.681 [220.50]8260 [2,082.81,524] 8.218 [208.74] 6.000 [152.40] na

9.625 [244.48] 36.0047.00 [53.5769.94] 8.681 [220.50] 8.921 [226.59]8460 [2,133.61,524] 8.432 [214.17] 6.000 [152.40] na

Not applicable

Seal Assembly Specifi cationsDescription,in [mm]

Size,in [mm]

Tool Through Seals, Min., in [mm]

7 [177.8] standard 4030 [1,016762] 3 [76.20]7 [177.8] alternative 4740 [1,193.81,016] 4 [101.60]9.625 [244.48] standard 6048 [1,5241,219.2] 4.828 [122.63]

slb.com/packers

Copyright 2014 Schlumberger. All rights reserved. 14-CO-0142

9

APPLICATIONS Deviated wells Multiple-zone, multiple-packer completions

ADVANTAGES Easy release with a fully adjustable,

straight-pickup shear mechanism Short, compact design Fast, reliable installation in straight or

highly deviated wells Field-proven performance Easier, safer retrieval with built-in

equalizing and circulating system

The Hydro-6* conventional multizone packer is ideal for use in deviated wells, multiple-packer completions, and applications where the packer is to be set after the wellhead is installed. Because no mandrel movement occurs during setting, it may also be used in multiple-packer completions where all packers are placed simultaneously.

Main features Hydraulic-set Retrievable For use in conventional completions

Setting-pressure featuresSet with a pressure differential, the Hydro-6 packer has an easily adjust able setting-pressure feature and a bidirectional mechanical slip system. The packer features a unique design that allows debris to be circulated from above the packer when releasing. A three-piece, dual-durometer element system and a built-in equalizing and circulating system ensure reduced risk and easy release.

No tubing movement is required to set the packer. After the packer is set, the tubing can be landed in either compression or neutral condition. The setting force is mechanically locked into the sealing elements with a positive ratchet-lock mechanism. The Hydro-6 packer is released with an upward pull exceeding the rating of the shear release screws. Optionally, the Hydro-6 packer is available with a rotation release mechanism.

Hydro-6Conventional multizone packer

*Mark of SchlumbergerCopyright 2014 Schlumberger. All rights reserved. 14-CO-0117 slb.com/packers

Hydro-6 Conventional Multizone Packer Specifications



Max. OD, in [mm]

Nominal ID, in [mm]

Max. Working Temperature, degF [degC]

5.500 [139.7] 1315.5 [19.3523.07] 4.781 [121.4] 2.000 [50.8] 275 [135]

5.500 [139.7] 15.520 [23.0729.76] 4.641 [117.9] 2.000 [50.8] 275 [135]

5.500 [139.7] 2023 [29.7634.23] 4.500 [114.3] 2.000 [50.8] 275 [135]

5.750 [146.1] 16.124.6 [23.9636.61] 4.744 [120.5] 2.000 [50.8] 275 [135]

6.625 [168.3] 2024 [29.7635.72] 5.661 [143.8] 2.441 [62.0] 275 [135]

6.625 [168.3] 2428 [35.7241.67] 5.625 [142.9] 2.441 [62.0] 275 [135]

6.625 [168.3] 2832 [41.6747.62] 5.484 [139.3] 2.441 [62.0] 275 [135]

7.000 [177.8] 1720 [25.3029.76] 6.266 [159.2] 2.441 [62.0] 275 [135]

7.000 [177.8] 2326 [34.2338.69] 6.078 [154.4] 2.441 [62.0] 275 [135]

7.000 [177.8] 2629 [38.6941.16] 5.968 [151.6] 2.441 [62.0] 275 [135]

7.000 [177.8] 3235 [47.6252.09] 5.817 [147.8] 2.441 [62.0] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

Hydro-6 conventional multizone packer.

10

APPLICATIONS As the bottom packer in multiple-zone

dual completions Single-zone completions Highly deviated wells and

multiple-packer completions

ADVANTAGES Fully adjustable, straight-pickup,

shear-release system Compact, field-proven design Quick, reliable installation in highly

deviated wells Built-in equalizing and circulating system

for increased safety and easy retrieval

The Hydro-8* conventional multizone packer is used in a variety of applications, including single-zone isolation, multiple-string hookups, selective multiple-zone production, and stimulation. The Hydro-8 packer features a mechanical, bidirectional slip system to anchor the packer and resist upward and downward tubing movement. It also has a built-in internal bypass system that allows formation pressure to equalize before the slip is fully released.


Setting operationThe Hydro-8 packer is set by applying tubing pressure, which acts on the packers setting piston area, shears the setting screws, and activates the packer-setting mechanism. The setting-mechanism trigger pressure is adjusted by adding or removing easily accessible shear screws. The packers hydrostatic chamber allows the packer to be successfully set at lower pump pressures.

Once the packer is fully set, the pack-off force is mechanically locked into the slips and sealing element with a positive lock-ratchet mechanism. This allows the tubing to be landed in either compression or neutral condition.

Release operationThe Hydro-8 packer does not require tubing manipulation during setting and can be set after the wellhead has been installed. Packer release is accomplished by a simple upward pull on the tubing string. Unlike many hydrostatic packers, the Hydro-8 packer can be adjusted or redressed in the field by onsite personnel. This packer also features an optional slickline-intervention, selective-set feature with a choice of upward or downward shift.

Hydro-8Conventional multizone packer


Hydro-8 Conventional Multizone Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]


4.500 [114.3] 9.513.5 [14.1420.09] 3.771 [95.8] 2.000 [50.8] 275 [135]

5.000 [127.0] 1113 [16.3719.35] 4.250 [108.0] 2.000 [50.8] 275 [135]

5.000 [127.0] 1518 [22.3226.79] 4.125 [104.8] 2.000 [50.8] 275 [135]

5.500 [139.7] 15.520 [23.0729.76] 4.641 [117.9] 2.441 [62.0] 325 [163]

5.500 [139.7] 2023 [29.7634.23] 4.500 [114.3] 2.441 [62.0] 325 [163] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

Hydro-8 conventional multizone packer.

11

APPLICATIONS Zone isolation, injection, and production Shallow wells

BENEFITS Simple, easy installation reduces

rig time

FEATURES 7,500-psi [51,710 kPa] and 10,000 psi

[68,947 kPa] nominal pressure rating Temperature ratings based

on elastomers Big bore version for larger production

tubing requirements Quarter right-hand rotation to

mechanically set and release Large internal bypass to maximize flow Double grip design to allow tubing

to be left in tension, compression, or neutral

Pressure hold from above or below Seals below upper slips that allow

flushing of debris prior to releasing Optional safety release system

(in some sizes)

The M1-X conventional packer permits unrestricted flow and passage of full-gauge wireline tools and accessories with an unrestricted ID, making it ideal for zone isolation, injection, and production. The M1-X packer can be set with production tubing in tension, compression, or neutral, maximizing effectiveness in shallow wells and fiberglass tubing operations.

Main features Mechanically set Retrievable For use in conventional completions

Bypass closureThe packers mechanical lock-set action closes an internal bypass and allows application of pressure above or below the packer while reducing surge-and-swab pressure during running and retrieval. This bypass closes during setting and opens to equalize pressure before releasing the slips.

Seals and releaseSeals below the upper slips allow debris above the packer to be washed away prior to release. The packer is released by a quarter right-hand turn at the tool, followed by straight pickup of the production tubing.

M1-XConventional packer

M1-X conventional packer.

12

M1-X Conventional Packer SpecificationsCasing Size,in [mm]


Casing ID, Min., in [mm]

Casing ID, Max., in [mm]


Tool ID, Min., in [mm]

ThreadBox Up/Pin Down

2.875 [73.03] 6.5 [9.67] 2.375 [60.33] 2.441 [62.00] 2.314 [58.78] 0.990 [25.15] 1.315 EU 10 RD3.5 [88.90] 7.710.2 [11.4615.18] 2.797 [71.04] 2.867 [72.82] 2.786 [70.76] 1.245 [31.62] 1.900 NU 10 RD4 [101.60] 9.511 [14.1416.37] 3.351 [85.12] 3.423 [86.94] 3.255 [82.68] 1.495 [7.97] 1.900 EU 10 RD

4.5 [114.30] 15.116.6 [22.4724.7] 3.629 [92.18] 3.701 [94.01] 3.255 [82.68] 1.495 [7.97] 1.900 EU 10 RD

4.5 [114.30] 13.515.1 [20.0922.47] 3.826 [97.18] 3.920 [99.57] 3.655 [92.84] 1.930 [49.02] 2.375 EU 8 RD

4.5 [114.30] 9.513.5 [14.1420.09] 3.920 [99.57] 4.090 [103.89] 3.759 [95.48] 1.930 [49.02] 2.375 EU 8 RD

5 [127.0] 20.821.4 [30.9531.85] 4.126 [104.80] 4.156 [105.56] 3.943 [100.15] 1.930 [49.02] 2.375 EU 8 RD

5 [127.0] 1820.8 [26.7930.95] 4.156 [105.56] 4.276 [108.61] 4.000 [101.60] 1.930 [49.02] 2.375 EU 8 RD

5 [127.0] 11.515 [17.1122.32] 4.408 [111.96] 4.560 [115.82] 4.125 [104.78] 1.930 [49.02] 2.375 EU 8 RD

5.5 [139.70] 2023 [29.7634.23] 4.670 [118.62] 4.778 [121.36] 4.500 [114.30] 1.995 [50.67] 2.375 EU 8 RD

5.5 [139.70] 1720 [25.3029.76] 4.778 [121.36] 4.892 [124.26] 4.625 [117.48] 1.995 [50.67] 2.375 EU 8 RD

5.5 [139.70] 1317 [19.3525.30] 4.892 [124.26] 5.044 [128.12] 4.625 [117.48] 1.995 [50.67] 2.375 EU 8 RD

5.5 [139.70] 2023 [29.7634.23] 4.670 [118.62] 4.778 [121.36] 4.500 [114.30] 2.360 [59.94] 2.875 EU 8 RD

5.5 [139.70] 1517 [22.3225.30] 4.778 [121.36] 4.950 [125.73] 4.625 [117.48] 2.360 [59.94] 2.875 EU 8 RD

5.5 [139.70] 1315 [19.3522.32] 4.950 [125.73] 5.044 [128.12] 4.781 [121.44] 2.360 [59.94] 2.875 EU 8 RD

5.75 [146.05] 1821.9 [26.7932.59] 5.000 [127.00] 5.142 [130.61] 4.817 [122.35] 2.360 [59.94] 2.875 EU 8 RD

5.75 [146.05] 1421.9 [20.8332.59] 5.000 [127.00] 5.282 [134.16] 4.817 [122.35] 2.360 [59.94] 2.875 EU 8 RD

6.625 [168.28] 2428 [35.7241.67] 5.791 [147.09] 5.921 [150.39] 5.588 [141.94] 2.515 [63.88] 2.875 EU 8 RD

6.625 [168.28] 2024 [29.7635.72] 5.921 [150.39] 6.049 [153.64] 5.755 [146.18] 2.515 [63.88] 2.875 EU 8 RD

7 [177.80] 3238 [47.6256.55] 5.920 [150.37] 6.094 [154.79] 5.588 [141.94] 2.515 [63.88] 2.875 EU 8 RD

7 [177.80] 2632 [38.6947.62] 6.094 [154.79] 6.276 [159.41] 5.588 [141.94] 2.515 [63.88] 2.875 EU 8 RD

7 [177.80] 2026 [29.7638.69] 6.276 [159.41] 6.538 [166.07] 6.000 [152.40] 2.515 [63.88] 2.875 EU 8 RD7 [177.80] 1720 [25.3029.76] 6.456 [163.98] 6.538 [166.07] 6.255 [158.88] 2.515 [63.88] 2.875 EU 8 RD

7 [177.80] 3238 [47.6256.55] 5.920 [150.37] 6.094 [154.79] 5.750 [146.05] 2.990 [75.95] 3.5 EU 8 RD

7 [177.80] 2632 [38.6947.62] 6.094 [154.79] 6.276 [159.41] 5.875 [149.23] 2.990 [75.95] 3.5 EU 8 RD

7 [177.80] 1724 [25.3035.72] 6.336 [160.93] 6.538 [166.07] 6.000 [152.40] 2.990 [75.95] 3.5 EU 8 RD

7.625 [193.68] 33.739 [50.1558.04] 6.625 [168.28] 6.765 [171.83] 6.453 [163.91] 2.515 [63.88] 2.875 EU 8 RD

7.625 [193.68] 2429.7 [35.7244.20] 6.875 [174.63] 7.025 [178.44] 6.672 [169.47] 2.515 [63.88] 2.875 EU 8 RD

7.625 [193.68] 33.739 [50.1558.04] 6.625 [168.28] 6.765 [171.83] 6.453 [163.91] 2.990 [75.95] 3.5 EU 8 RD

7.625 [193.68] 2429.7 [35.7244.20] 6.875 [174.63] 7.025 [178.44] 6.672 [169.47] 2.990 [75.95] 3.5 EU 8 RD

8.625 [219.08] 3240 [47.6259.53] 7.725 [196.22] 7.921 [201.19] 7.500 [190.50] 4.000 [101.60] 4.5 EU 8 RD

8.625 [219.08] 2428 [35.7241.67] 8.017 [203.63] 8.097 [205.66] 7.750 [196.85] 4.000 [101.60] 4.5 EU 8 RD

9.625 [244.48] 43.553.5 [64.7479.62] 8.535 [216.79] 8.755 [222.38] 8.250 [209.55] 4.000 [101.60] 4.5 EU 8 RD

9.625 [244.48] 3243.5 [47.6264.74] 8.755 [222.38] 9.001 [228.63] 8.500 [215.90] 4.000 [101.60] 4.5 EU 8 RD10.75 [273.05] 32.845.5 [48.8167.71] 9.950 [252.73] 10.192 [258.88] 9.688 [246.08] 4.000 [101.60] 4.5 EU 8 RD

Casing weight available in 10,000 psi and standard bores.

M1-X

slb.com/packers


13

APPLICATIONS Conventional completions Vertical and deviated wells Permanent sealbore production or

isolation packer High-volume production and

injection wells Sump packer for gravel-pack

applications

BENEFITS High running speed reduces rig time Packer is easily milled

FEATURES Setting on wireline, coiled tubing,

or tubing workstring to provide operational versatility

10,000-psi [68,947 kPa] nominal pressure rating

Temperature ratings based on elastomer type

Full-circle, opposed slips to minimize induced loads in supporting casing

Sealbore ID in packer mandrel for optimum seal performance

S limline design for fast, easy running Optional bottom guides for quick addition

of millout extensions, sealbore extensions, and other accessories

The MDF conventional multisetting packer and MDFBB conventional multisetting big-bore packer are high-performance completion packers featuring a standard operating envelope of 10,000-psi [68,947 kPa] nominal pressure rating (temperature ratings based on elastomers).

Main features Hydraulic- and wireline-set Permanent For use in conventional applications

Construction and pressure integrityThe MDFBB packer features a larger bore than the MDF packer for use with larger-diameter production tubing. Both packers feature a setting sleeve, sealbore mandrel, opposed full-circle slips and cones, and a packing element assembly with a backup system for maximum pressure integrity. Optional bottom guides are threaded to the mandrel for including accessories such as sealbore extensions, millout extensions, or tailpipe assemblies.

A range of available elastomers and materials for flow-wetted parts ensure compatibility with wellbore fluids; the Elastomer Guide outlines the materials available for a variety of service conditions.

MDF and MDFBBConventional multisetting packer and conventional multisetting big-bore packer

MDFBB conventional multisetting big-bore packer.

MDF conventional multisetting packer.

14

MDF Conventional Multisetting Packer Specifi cationsCasingSize, in [mm]



Casing ID,Max.,in [mm]

ToolSize

Tool OD, Max.,in [mm]

Sealbore, Min., in [mm]

Seal AssemblySize

Throughbore Seals, Min., in [mm]

Baker E-4 SettingTool

Hydraulic Setting Tool

4.5[114.30]

9.513.5 [14.1420.09]

3.920[99.56]

4.090 [103.88] 3726 3.750 [95.25] 2.687 [68.24] 2619 1.938 [49.22] Size 10 2.375 tool

5 [127]1520.8 [22.3230.95]

4.156 [105.56]

4.408 [111.96] 3926 3.960 [100.58] 2.687 [68.24] 2619 1.938 [49.22] Size 20 2.375 tool

11.513 [17.1119.35]

4.494 [114.14]

4.560 [115.82] 4226 4.250 [107.95] 2.687 [68.24] 2619 1.938 [49.22] Size 20 2.375 tool

5.5[139.70]

2023 [29.7634.22]

4.670 [118.61]

4.778 [121.36] 4426 4.430 [112.52] 2.687 [68.24] 2619 1.938 [49.22] Size 20 2.375 tool

1317 [19.3525.30]

4.892 [124.25]

5.044 [128.12] 4526 4.560 [115.82] 2.687 [68.24] 2619 1.938 [49.22] Size 20 2.875 tool

2026 [29.7638.69]

4.548 [115.52]

4.778 [121.36] 4326 4.33 [109.98] 2.687 [68.25] 2619 1.938 [49.23] Size 20 2.875 tool

7[177.80]

3238[47.6256.55]

5.920 [150.36]

6.094 [154.79]

5626 5.687 [141.45] 2.687 [68.24] 2619 2.375 [60.32] Size 20 2.875 tool5632 5.687 [141.45] 3.250 [82.55] 3224 2.375 [60.32] Size 20 2.875 tool

2632 [38.6947.62]

6.094 [154.78]

6.276 [159.41]


2638 [38.6956.55]

5.920 [150.36]

6.276 [159.41] 5732 5.687 [141.45] 3.250 [82.55] 3224 2.375 [60.32] Size 20 2.875 tool

7.625[193.675]

33.745.3[50.1567.41]

6.366 [161.69]

6.765 [171.83]


2439 [35.7258.04]

6.625 [168.27]

7.025 [178..44]


9.625[244.47]

4758.40 [69.9486.91]

8.435 [214.24]

8.681 [220.49] 8247 8.217 [210.08] 4.750 [120.65] 4738 3.875 [98.42] Size 20 2.875 tool

MDF and MDFBB

MDFBB Conventional Multisetting Big-Bore Packer Specifi cationsCasingOD, in [mm]



Casing ID,Max.,in [mm]

ToolSize

Tool OD, Max.,in [mm]

Sealbore, Min., in [mm]

Seal Assembly Size

Min. Throughbore Seals, in [mm]

Baker E-4 Setting Tool

Hydraulic Setting Tool

4.5 [114.30]

13.515.10 [20.0922.47]

3.826 [97.18]

3.920 [99.568] 3625 3.599 [91.41] 2.500 [63.50] 2521 2.137 [54.27] Size 10 2.375 tool

5.5 [139.70]

2023 [29.7634.22]

4.670[118.61]

4.778 [121.36] 4430 4.437 [112.70] 3.000 [76.20] 3023 2.360 [59.94] Size 20 2.875 tool

1317 [19.3525.30]

4.892[124.25]

5.044 [128.12] 4530 4.563 [115.90] 3.000 [76.20] 3023 2.360 [59.94] Size 20 2.875 tool

7 [177.80]

3238 [47.6256.55]

5.920 [150.36]

6.094 [154.79] 5640 5.687 [141.45] 4.000 [101.60] 4030 3.000 [76.20] Size 20 2.875 tool

2632 [38.6947.62]

6.094 [154.78]

6.366 [161.69] 5840 5.875 [149.23] 4.000 [101.60] 4030 3.000 [76.20] Size 20 2.875 tool

7.625 [193.675]

33.745.30 [50.1567.41]

6.366 [161.69]

6.765 [171.83] 6140 6.187 [157.15] 4.000 [101.60] 4030 3.000 [76.20] Size 20 2.875 tool

2439 [35.7158.04]

6.625 [168.27]

7.025 [178.44] 6340 6.375 [161.93] 4.000 [101.60] 4030 3.000 [76.20] Size 20 2.875 tool

9.625 [244.47]

4758.4 [69.9486.91]

8.435 [214.24]

8.681 [220.49] 8260 8.218 [208.73] 6.000 [152.4] 6055 5.505 [139.82] Size 20 2.875 tool

3647 [53.5769.94]

8.681 [220.49]

8.921 [226.59] 8460 8.437 [214.29] 6.000 [152.4] 6055 5.505 [139.82] Size 20 2.875 tool

slb.com/packers


15

APPLICATIONS Single-string completions Zonal isolation Vertical, deviated, or horizontal wellbores

BENEFITS Simplified operations reduce rig costs

FEATURES Ability to pressure test the system at

the surface No tubing movement during installation Minimal debris buildup above slips Easy to circulate out debris before retrieval Positive casing grip to secure packer Slips located below the sealing element Equalization system above the element Adjustable, straight-pull shear release Field-proven sealing element Bidirectional slips Minimized end effect on

shear-release screws

The MRP conventional modular packer is used in vertical and deviated wellbores or in applications in which single or multiple packers are set after the wellhead has been installed. A modular shell and body design for low-to-medium pressure differentials allows configuration as a single-string production packer. Its compact, modular design makes the MRP packer an economical choice for production applications.

Main features Hydraulic-set Retrievable For use in conventional completions Designed and tested in accordance with ISO 14310 V3

Installation and releaseThe MRP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the MRP packer is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing and the element relaxes. Set at the factory to a standard value, the packer shear-release mechanism can be adjusted in the field just before installation.

MRP conventional modular packer.

MRPConventional modular packer

16


MRP

slb.com/packers

MRP Conventional Modular Packer Specifications



Max. OD, in [mm]

Nominal ID, in [mm]


Differential Pressure Rating, psi [kPa]

7.000 [177.8] 2326 [34.2338.69] 6.090 [154.7] 2.426, 2.922 [61.62, 74.22] 325 [163] 7,000 [48,263]

7.000 [177.8] 2629 [38.6943.16] 6.000 [152.4] 2.426, 2.922 [61.62, 74.22] 325 [163] 7,000 [48,263]

7.000 [177.8] 2932 [43.1647.62] 5.910 [150.1] 2.426, 2.922 [61.62, 74.22] 325 [163] 7,000 [48,263]

7.000 [177.8] 3235 [47.6252.09] 5.850 [148.6] 2.426, 2.922 [61.62, 74.22] 325 [163] 7,000 [48,263]

7.625 [193.7] 26.429.7 [39.2944.20] 6.690 [169.9] 2.922 [74.2] 325 [163] 7,000 [48,263]

7.625 [193.7] 33.739 [50.1558.04] 6.440 [163.6] 2.922 [74.2] 325 [163] 7,000 [48,263]

9.625 [244.5] 4047 [59.5369.94] 8.463 [215.0] 2.922, 3.910, 4.733 [74.2, 99.3, 120.2] 325 [163] 7,000 [48,263]

9.625 [244.5] 4753.5 [69.9479.62] 8.354 [212.2] 2.922, 3.910, 4.733 [74.2, 99.3, 120.2] 325 [163] 7,000 [48,263] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

17

APPLICATIONS Deviated wellbores Conditions where mechanically setting

equipment is difficult Single zone completions Bottom packer in multizone completions

BENEFITS Packer can be set in both low and high

hydrostatic wells

FEATURES Straight-pull release Locked-in pack-off force Hydraulic hold-downs that resist

differential pressure below the packer Hydraulic setting for low hydrostatic wells Ability to withstand high

hydrostatic pressure

The Neptune* conventional hydrostatic-set packer can be set either hydraulically or hydrostatically, allowing tubing to be left neutral or in compression. The Neptune packer is for use in deviated wellbores or other conditions where use of mechanically set equipment is not feasible.

Main features Hydrostatic-set Retrievable For use in conventional completions

Setting operationThe Neptune packer withstands high hydrostatic pressures and includes hydraulic hold-downs to resist differential pressure from below. The packer can be set hydraulically in low hydrostatic head wells and can be released with a straight-pull release.

NeptuneConventional hydrostatic-set packer

Neptune conventional hydrostatic-set packer.

18

NeptuneNeptune Conventional Hydrostatic-Set Packer Specifi cationsCasing Size, in [mm]


Casing, Min., in [mm]

Casing, Max., in [mm]

Packer OD, Max., in [mm]

Packer Tool, in [mm]

Thread Box Pin

4.5 [114.30] 9.513.5 [14.1420.09] 3.910 [93.31] 4.090 [103.88] 3.770 [95.76] 1.978 [50.241] 2.375 EU 8 RD5 [127.00] 1518 [22.3226.79] 4.250 [114.30] 4.410 [112.01] 4.130 [104.90] 1.978 [50.241] 2.375 EU 8 RD5 [127.00] 11.515 [17.1122.32] 4.410 [112.01] 4.560 [115.82] 4.250 [107.95] 1.978 [50.241] 2.375 EU 8 RD5.5 [139.70] 2023 [29.7634.23] 4.630 [117.60] 4.780 [121.41] 4.500 [114.30] 1.995 [50.673] 2.375 EU 8 RD5.5 [139.70] 15.520 [23.0729.76] 4.780 [121.41] 4.950 [125.73] 4.640 [117.86] 1.995 [50.673] 2.375 EU 8 RD5.5 [139.70] 1315.5 [19.3523.07] 4.950 [125.73] 5.190 [131.83] 4.780 [121.41] 1.995 [50.673] 2.375 EU 8 RD

7 [177.80] 38 [56.55] 5.920 [150.36] 5.795 [147.19] 5.656 [143.66]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7 [177.80] 3235 [47.6252.09] 5.940 [150.88] 6.140 [155.95] 5.810 [147.57]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7 [177.80] 2629 [38.6943.16] 6.140 [155.96] 6.280 [159.51] 5.970 [151.64]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7 [177.80] 2026 [29.7638.69] 6.280 [159.51] 6.460 [164.08] 6.080 [154.43]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7 [177.80] 1720 [25.3029.76] 6.460 [164.08] 6.580 [167.13] 6.270 [159.26]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7.625 [193.67] 33.739 [50.1558.04] 6.580 [167.13] 6.800 [172.72] 6.450 [163.83] 2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7.625 [193.67] 2429.7 [35.7244.20] 6.800 [172.72] 7.030 [178.56] 6.670 [169.42]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

7.625 [193.67] 2024 [29.7635.72] 7.030 [178.56] 7.130 [181.10] 6.810 [172.97]2.416 or 3.000 [61.366 or 76.2] 2.875 or 3.500 EU 8 RD

9.625 [244.48] 29.336 [43.6053.57] 8.921 [226.59] 9.063 [230.20] 8.593 [218.26] 4.000 [101.600] 4.500 LCT9.625 [244.48] 4047 [59.5369.94] 8.681 [220.49] 8.835 [224.41] 8.437 [214.30] 4.000 [101.600] 4.500 LCT9.625 [244.48] 4753 [69.9478.87] 8.343 [211.91] 8.681 [220.49] 8.218 [208.74] 4.000 [101.600] 4.500 LCT

slb.com/packers

*Mark of SchlumbergerCopyright 2014 Schlumberger. All rights reserved. 14-CO-0146

19

APPLICATIONS Vertical, deviated, or horizontal wellbores Permanent production or isolation packing Nonperforated wellbores

BENEFITS Reduced overall rig costs due to shorter

installation times Eliminated plug installation in

high-angle wells Decreased rig time associated with

standard methods to set packers

FEATURES No slickline or plug to set Atmospheric chamber to ensure maximum

setting force is applied to packer Self-energizing element system Can be set with standard methods as

a backup Autoset feature in case the tubing

string drops ISO 14310 V0 qualified

The NIS conventional interventionless hydrostatic-set packer is designed to be set in a closed system, such as a cased well before perforating. Another popular option is an open completion (openhole lateral or perforated casing) isolated by a formation isolation valve.

Main features Hydrostatic-set Permanent For use in conventional completions Designed and tested in accordance with ISO 14310 V0 standards

Multiple setting optionsTo prevent premature setting of the packer, rupture discs are used to isolate the setting chamber. Each NIS packer is internally tested with nitrogen to ensure that the hydrostatic chamber is leak-free and will activate the packer at the proper depth. The NIS packer has a contingency set option whereby the packer can be set by conventional means; i.e., a plug is set below the packer on slickline and pressure is applied to the packer setting chamber through the tubing.

This packer is an ideal candidate to reduce expensive rig time for extended-reach or deep wells.

NISConventional interventionless hydrostatic-set packer

Other company, product, and service names are the properties of their respective owners.Copyright 2014 Schlumberger. All rights reserved. 14-CO-0160 slb.com/packers

NIS Conventional Interventionless Hydrostatic-Set Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



9.625 [244.5] 4753.5 [69.9479.62] 8.29 [210.6] 4.66 [118.4] 325 [163] 10,000 [68,948] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

NIS conventional interventionless hydrostatic-set packer.

20

APPLICATIONS All installations

ADVANTAGES Low maintenance cost 7,500-psi [51,710-kPa] maximum working

differentialpressure Hydraulic setting Double mechanical grip Double isolator element for a larger

packingarea Releasing system by tension Wide passage optionavailable upon

special request

The PHT hydraulic packer features double mechanical grip and is hydraulically set but retrieved by tension. This economical and compact packer is designed for all type of installations. After being set, the tubing can remain with weight, neutral, orintension, easing the packers operation.

Main features Hydraulic-set Retrievable For use in all installations

Setting operationPrior to running the packer, rate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole, should multiple packers berequired. Run the packer (with the predetermined string) with a blank plug or another element for that purpose (according to installation) to allow pressurization. Upon reaching the required depth, apply pressure according to the shearing values of the setting pins. Check thecorrect operation with weight and tension.

Releasing operationSet the string at the neutral point and apply tension over the tubing weight, according to therate of the shearing ring for thisoperation.

PHT Hydraulic packer

PHT hydraulic packer.

21

CA

B

PHT Hydraulic Packer Specifications


Casing Weight, lbm/ft [kg/m]



Tool OD, in [mm]

Tool ID, in [mm]

Tool Length, in [mm]

Connection

5 [127.00]11.515 [17.1122.32] 4.406 [111.90] 4.559 [115.80] 4.244 [107.80] 2.000 [50.80] 50.630 [1,286.00] 2 EU 8RD

18 [26.79] 4.276 [108.60] 4.406 [111.90] 4.126 [104.80] 2.000 [50.80] 50.630 [1,286.00] 2 EU 8RD

5 [139.70]1317 [19.3525.30] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 49.803 [1,265.00] 2 EU 8RD

20 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 49.803 [1,265.00] 2 EU 8RD

5 [139.70]1317 [19.3525.30] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 49.803 [1,265.00] 2 EU 8RD

20 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 49.803 [1,265.00] 2 EU 8RD

7 [177.80]

1720 [25.3029.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 61.417 [1,560.00] 2 EU 8RD

2326 [34.2338.69] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 61.417 [1,560.00] 2 EU 8RD

29 [43.16] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 61.417 [1,560.00] 2 EU 8RD

32 [47.62] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 61.417 [1,560.00] 2 EU 8RD

3538 [52.0956.55] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 61.417 [1,560.00] 2 EU 8RD

7 [177.80]

1720 [25.3029.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 61.417 [1,560.00] 3 EU 8RD

2326 [34.2338.69] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 61.417 [1,560.00] 3 EU 8RD

29 [43.16] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.992 [76.00] 61.417 [1,560.00] 3 EU 8RD

32 [47.62] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 61.417 [1,560.00] 3 EU 8RD

3540 [52.0959.53] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.992 [76.00] 61.417 [1,560.00] 3 EU 8RD


slb.com/packers

PHT

22

APPLICATIONS High-pressure environments Acid and frac stimulation operations Production and injection wells

BENEFITS Packer operates reliably in high differential

pressures and temperatures

FEATURES 10,000-psi [68,947-kPa] maximum

working pressure Available for 5.5-in [139.70-mm] casing with

2 EU 8RD and 2 EU 8RD connections and for 7-in [177.80-mm] casing with 2 EU 8RD connections

7-in [177.80-mm] OD size with 3 EU 8RD connection available upon special request

Bypass with bonded seals Ability to be used as a

semipermanent packer Emergency release system

The PMDJ production mechanical packer is a mechanically set retrievable production packer featuring two sets of slips to provide a secure grip. The double jay-setting system design enables reliable operation in environments of high differential pressures and temperatures. This packer can support both acid and frac stimulation operations and has applications in oil and gas production wells in addition to injection wells due to its lack of dynamic O-rings. The packer can be set in compression, tension,or neutral.

Main features Mechanically set Retrievable For use in high-pressure environments and production and

injection wells

Setting operationUpon attaining desired depth, pull the string upward until the jay-slot is cleared and rotate half a turn clockwise. Apply 8,000 lbf [35,585 N] of compressive force, then pull the same tension value upward. Repeat these last two steps to ensure good isolation.

Releasing operationApply 2,000 lbf [8,896 N] of compressive force, rotate half a turn clockwise, and pull. For emergency release, pull until the emergency release pins are sheared.

PMDJProduction mechanical packer

PMDJ production mechanical packer.

23

CB

A

PMDJ Production Mechanical Packer Specifications


Casing Weight, lbm/ft [kg/m]



Tool OD, in [mm]

Tool ID, in [mm]

Tool Length, in [mm]

Connection

5.5 [139.70]

1315.5 [19.3423.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2000 [50.80] 50.945 [1,294.00] 2 EU 8RD

15.517 [23.0625.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.000 [50.80] 50.945 [1,294.00] 2 EU 8RD

1723 [25.0634.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.000 [50.80] 50.945 [1,294.00] 2 EU 8RD

5.5 [139.70]

1315.5 [19.3423.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2 EU 8RD

15.517 [23.0625.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2 EU 8RD

1723 [25.0634.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.402 [61.00] 50.945 [1,294.00] 2 EU 8RD

7 [177.80]

1720 [25.2929.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.402 [61.00] 47.638 [1,210.00] 2 EU 8RD

2326 [34.2238.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.402 [61.00] 47.638 [1,210.00] 2 EU 8RD

2629 [38.6843.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.402 [61.00] 47.638 [1,210.00] 2 EU 8RD

7 [177.80]

1720 [25.2929.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.992 [76.00] 47.638 [1,210.00] 3 EU 8RD

2326 [34.2238.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.992 [76.00] 47.638 [1,210.00] 3 EU 8RD

2629 [38.6843.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.992 [76.00] 47.638 [1,210.00] 3 EU 8RD


PMDJ

slb.com/packers

24

APPLICATIONS Vertical, deviated, or horizontal wellbores Sump packing in gravel-pack operations Permanent gravel-pack packing Permanent sealbore production or

isolation packing

BENEFITS High running speed reduces rig time for

packer installation and setting

FEATURES Dual-opposing, one-piece slips Full-circle, solid-metal backup system to

prevent element extrusion Unique swab-resistant element Pin-down configuration to allow easy

attachment of accessories Ability to be easily milled

The QL conventional sealbore packer is used as a production packer, gravel-pack packer, or a sump packer. The QL packer features the same upper latching profile as the QUANTUM* gravel-pack packer.

Main features Wireline- or hydraulic-set Permanent For use as a production, gravel-pack, sump, or

isolation packer Exceeds ISO 14310 V3 standards

Fast runningThis packer is designed for risk-free and fast running either on wireline or with a hydraulic-setting tool on drill pipe or tubing. QL packers may be run and set on wireline using an E-4 or equivalent pressure setting assembly. On drillpipe or coiled tubing, a hydraulic-setting tool is used.

Use in hostile environmentsThis is a tough, large-bore packer with a field-proven record. The QL packer is suitable for standard or H2S service and is also available in several alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is

QLConventional sealbore packer

*Mark of SchlumbergerOther company, product, and service names are the properties of their respective owners.Copyright 2014 Schlumberger. All rights reserved. 14-CO-0192 slb.com/packers

QL Conventional Sealbore Packer Specifications



Max. OD, in [mm]

Nominal ID, in [mm]



5.500 [139.7] 1417 [20.8325.30] 4.563 [115.9] 3.003 [76.3] 325 [163] 10,000 [68,948]

5.500 [139.7] 2023 [29.7634.23] 4.437 [112.7] 3.003 [76.3] 325 [163] 10,000 [68,948]

7.000 [177.8] 2026 [29.7638.69] 6.015 [152.8] 4.003 [101.7] 325 [163] 10,000 [68,948]

7.000 [177.8] 2629 [38.6943.16] 5.890 [149.6] 4.003 [101.7] 325 [163] 10,000 [68,948]

7.000 [177.8] 3235 [47.6252.09] 5.815 [147.7] 4.003 [101.7] 325 [163] 10,000 [68,948]

7.000 [177.8] 3238 [47.6256.55] 5.687 [144.4] 4.003 [101.7] 325 [163] 10,000 [68,948]

7.625 [193.7] 33.739 [50.1558.04] 6.265 [159.1] 4.003 [101.7] 325 [163] 10,000 [68,948]

9.625 [244.5] 3647 [53.5769.94] 8.463 [215.0] 6.003 [152.5] 325 [163] 10,000 [68,948]


QL conventional sealbore packer.

25

APPLICATIONS Vertical, deviated, or horizontal wellbores Permanent gravel-pack packing Permanent sealbore production or

isolation packing

BENEFITS High running speed reduces rig time

required to install and set the packer Packer is easily milled Design allows fast and reliable installation

FEATURES Dual-opposing, one-piece slips 360 solid-metal backup system to prevent

element extrusion Unique swab-resistant element Pin-down configuration for easy

attachment of accessories

The QLH conventional hydrostatic-set sealbore packer features the same upper latching profile as the QUANTUM* gravel-pack packer. This packer is designed for reliable and fast installation. The integral setting cylinder located below the bottom slips provides the force needed to set the full-circumference slips and pack off the sealing element. The QLH packer may be set after the tubing has been landed and the wellhead installed, eliminating the need for special equipment to facilitate tubing space out.

Main features Hydrostatic-set Permanent For use in high-pressure, gravel-pack, sump, and isolation applications

Usage and compatibilityThe QLH packer is compatible with all QL permanent packer seal assemblies and accessories. It is suitable for standard or H2S service and is available in alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is available for the QLH packer.

This permanent packer may be milled over and retrieved using a standard packer milling tool.

QLHConventional hydrostatic-set sealbore packer


QLH Conventional Hydrostatic-Set Sealbore Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



9.625 [244.5] 3647 [53.5769.94] 8.463 [215.0] 4.892 [124.3] 325 [163] 10,000 [68,948]


QLH conventional hydrostatic-set sealbore packer.

26

APPLICATIONS Vertical, deviated, or horizontal wellbores Installations requiring a full tubing ID

through the packer and latch assembly Permanent sealbore production or isolation

packer

BENEFITS High running speed reduces rig time

required to install and set the packer Packer is easily milled Design allows fast and reliable installation

FEATURES Dual-opposing, one-piece slips 360 solid-metal backup system to prevent

element extrusion Upper and lower sealbores Unique swab-resistant element Pin-down configuration for easy attach-

ment of accessories

The QLHB conventional hydraulic-set sealbore and stepbore packer, with a large upper sealbore, is commonly used as a production packer. In special applications, it can be used as a gravel-pack packer or a sump packer. The QLHB features the same upper latching profile as the QUANTUM* gravel-pack packer.

Main features Hydraulic-set Permanent For use in gravel-pack completions and H2S service

Hostile environmentsThe QLHB is suitable for standard or H2S service and is also available in several alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is available for the QLHB packer.

QLHB packers may be milled over and retrieved using standard packer milling tools.

QLHBConventional hydraulic-set sealbore and stepbore packer

QLHB conventional hydraulic-set sealbore and stepbore packer.

27


QLHB

slb.com/packers

QLHB Conventional Hydraulic-Set Sealbore and Stepbore Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



Upper Sealbore Nominal ID, in [mm]

7.000 [177.8] 3228 [47.6241.67] 5.687 [144.4] 4.003 [101.7] 325 [163] 10,000 [68,948] 4.753 [120.7] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

28

APPLICATIONS Liner-top isolation and straddle

packer installation

ADVANTAGES 10,000 psi [68,947 kPa] nominal

pressure rating Temperature based on elastomers Available elements for well conditions

up to 450 degF [232 degC] Wireline setting with setting adapter Straight-pull-release Standard right-hand-release top section

and conventional anchor seal assembly Optional jay slot top connections Optional bottom thread connections

The RSB Sphinx* conventional wireline-set sealbore packer provides a downhole sealbore that can be removed and redressed when necessary, making it ideal for liner-top isolation and straddle packer installation. The packer can also be used as a locating sealbore for whipstock lateral work or locating drilling and production diverters with the optional jay slot top connection included.

Main features Wireline-set Retrievable For use in conventional completions

Features and settingsThe RSB Sphinx packer is rated to 10,000 psi [68,947 kPa], with an optional element system available for higher-temperature applications. The tool features a right-hand-release top section and a conventional anchor seal assembly in its standard configuration. A range of optional bottom thread connections are available to increase completion options.

RSB SphinxConventional wireline-set sealbore packer

RSB Sphinx conventional wireline-set sealbore packer.

RSB Sphinx Conventional Wireline-Set Sealbore Packer Specifi cationsOD, in [mm]


ID, Min., in [mm]

ID, Max., in [mm]

Size OD, Max., in [mm]

7 [177.80] 2632 [38.6947.62] 6.094 [154.81] 6.276 [159.41] 5940 5.932 [150.67]9.625 [244.48] 4753.5 [69.9479.62] 8.535 [216.79] 8.681 [220.50] 8252 8.213 [208.61]

9.625 [244.48] 4047 [59.5369.94] 8.681 [220.50] 8.835 [224.41] 8452 8.437 [214.30]

9.625 [244.48] 3640 [53.5759.53] 8.835 [221.41] 5.250 [133.35] 8552 8.593 [281.26]

slb.com/packers*Mark of SchlumbergerCopyright 2014 Schlumberger. All rights reserved. 14-CO-0147

29

APPLICATIONS Dual-zone production or

injection applications

ADVANTAGES No tubing movement during

the setting sequence Straight-pull-release Variety of tubing connections and

anchor seal assemblies ECNER array packing element system Able to be used for tandem packer

installations Selective-set pressure with an additional

setting piston assembly Rotational lock

The RSBH[I] Sphinx* conventional injection sealbore packer is a high-performance, hydraulic-set, single-string packer for injection and production. It is utilized for most dual-zone production or injection applications. The wellhead can be installed and flanged up before setting the packer.

Main features Hydraulic-set Retrievable For use in dual-zone production or injection applications

Operating and running proceduresTest the packer in the shop using the test kit prior to delivery to the wellsite. When the packer reaches the setting depth, plug the setting string below the packer, and pressure the tubing to 90% of the expected shut-in production pressure. In no case should the setting pressure be less than 2,000 psi [13,789 kPa]. Hold the pressure for 35 minutes to permit the packing elements and slips to properly seat against the casing. Once the packer is fully set, it may be pressure tested.

RSBH[I] SphinxConventional injection sealbore packer

RSBH[I] Sphinx conventional injection sealbore packer.

RSBH[I] Sphinx Conventional Injection Sealbore Packer Specifi cationsCasing OD, in [mm]





Packer Tool, in [mm]

9.625 [244.48] 4753.5 [69.9479.62] 8.535 [216.79] 8.681 [220.50] 8.218 [208.74] 6.000 [152.4]9.625 [244.48] 4047 [59.5369.94] 8.681 [220.50] 8.835 [224.41] 8.437 [214.30] 6.000 [152.4]9.625 [244.48] 4036 [59.9353.57] 8.835 [224.41] 8.921 [226.59] 8.593 [218.26] 6.000 [152.4]


30

APPLICATIONS Liner top isolation and straddle

packer installation Dual-zone production or injection Single-trip completions Production or isolation sealbore packer Injection and production wells

BENEFITS Single trip with production tubing saves

rig time Design prevents disengagement while

running and setting

FEATURES 7,000-psi [48,263-kPa] nominal

pressure rating Temperature rating based on elastomers One-trip hydraulic setting Straight-pull-release ECNER array packing element system Able to be used for tandem packer

installations Selective-set pressure with an

additional setting piston assembly Rotational lock Variety of tubing connections and

anchor seal assemblies No tubing movement during the

setting sequence

The RSBH Sphinx* conventional sealbore packer is a high-performance, hydraulic-set, single-string packer. It provides a downhole sealbore that can be removed and redressed when necessary, making it ideal for liner top isolation and straddle packer installation. The packer can also be used as a locating sealbore for whipstock lateral work or locating drilling and production diverters with the optional jay slot top connection included.


Features and settingsThe RSBH Sphinx packer is rated to 7,000 psi [48,263 kPa], with an optional element system available for higher-temperature applications. The packer is used for most dual-zone production or injection applications. The wellhead can be installed and flanged up before setting the packer. The tool features a left-hand-release top section and a conventional anchor seal assembly in its standard configuration. A range of optional bottom thread connections are available to increase completion options.

RSBH SphinxConventional sealbore packer

RSBH Sphinx conventional sealbore packer.

RSBH Sphinx Conventional Sealbore Packer Specifi cationsCasing Size,in [mm]


Tool ID,in [mm]

Standard Sealbore, in [mm]

Alternative Sealbore, in [mm]

7 [177.80]

3238 [47.6256.55] 5.750 [146.05] 4.00 [101.60] 4.75 [120.66]2632 [38.6947.62] 5.937 [150.79] 4.00 [101.60] 4.75 [120.66]2326 [34.23 38.69] 6.083 [154.50] 4.00 [101.60] 4.75 [120.66]1720 [25.3034.23] 6.271 [159.28] 4.00 [101.60] 4.75 [120.66]


31

The Versalok conventional wireline-set packer features the versatility of a multipurpose packer. The Versalok packer features a bypass system that equalizes pressure across the packer prior to releasing the upper slips, while a spring above the upper slips assures positive slip engagement during extreme pressure reversals. An innovative rotational release system eliminates any potential for premature release problems.

Main features Wireline-set Retrievable For use in conventional completions

Setting featuresThe Versalok retrievable production packer provides a full-opening mandrel compatible with standard tubing profile nipples. The wireline setting feature makes the Versalok packer well suited for applications requiring fiberglass production tubing.

Versalok conventional wireline-set packer.

APPLICATIONS Ideal use for applications requiring

fiberglass production tubing

BENEFITS Wireline setting saves time and enables

accurate packer placement

FEATURES Compatibility with standard production

tubing accessories Full-opening mandrel for tubing

compatibility, even in heavy-wall casing sizes

Bypass that opens before releasing upper slips for trouble-free retrieval

Availability of 7 ,500- and 10,000-psi [51,710- and 6,947-kPa] pressure-rated designs

M aximum compression of follower spring to ensure positive slip engagement during pressure reversals

Single-trip retrieval using tubing and an on/off tool

VersalokConventional wireline-set packer

32

VersalokVersalok Conventional Wireline-Set Packer Specifi cationsCasing OD, in [mm]



Tool ID, Max., in [mm]

Standard Thread Connections Box Pin

4.5 [114.3] 9.513.5 [14.1420.09] 3.75 [95.25] 1.938 [49.225] 2.375 EU 8 RD5 [127.00] 11.515 [17.1122.32] 4.125 [104.775] 1.938 [49.225] 2.375 EU 8 RD5 [127.00] 1820.8 [26.7830.95] 4 [101.600] 1.938 [49.225] 2.375 EU 8 RD5.5 [139.70] 1315.5 [19.3523.07] 4.781 [121.437] 2.000 [50.800] 2.375 EU 8 RD5.5 [139.70] 15.520 [23.0729.76] 4.625 [117.475] 2.000 [50.800] 2.375 EU 8 RD5.5 [139.70] 2023 [29.7634.23] 4.5 [114.3] 2.000 [50.800] 2.375 EU 8 RD5.5 [139.70] 1315.5 [19.3523.07] 4.781 [121.437] 2.375 [60.325] 2.875 EU 8 RD5.5 [139.70] 15.520 [23.0729.76] 4.625 [117.475] 2.375 [60.325] 2.875 EU 8 RD5.5 [139.70] 2023 [29.7634.23] 4.5 [114.3] 2.375 [60.325] 2.875 EU 8 RD7 [177.80] 1726 [25.3038.69] 6 [152.4] 2.500 [63.500] 2.875 EU 8 RD7 [177.80] 2632 [38.6947.62] 5.875 [149.225] 2.500 [63.500] 2.875 EU 8 RD7.625 [193.675] 33.739 [50.1558.04] 6.453 [163.906] 2.500 [63.500] 2.875 EU 8 RD7.625 [193.675] 2429.7 [35.7244.20] 6.672 [169.468] 2.500 [63.500] 2.875 EU 8 RD

slb.com/packers


33

ESP/Dual Completion Packers

35

APPLICATIONS Dual- and ESP completions Multizone completions

BENEFITS Straight-pull shear release is not affected by

differential pressure Design features configurable end

connections

FEATURES One-trip hydraulic operation Scoop head for short-string stabbing

available for some sizes Sequential upper slip releasing system for

reduced releasing force Able to be set on long or short string Long string straight-pull shear release Rating of 5,000 psi [34,473 kPa] at 275 degF

[135 degC] Integral thread and sealbore for

anchoring and sealing short strings

The Ultra Dual conventional dual-completion packer is a dual-zone completion packer rated to 5,000 psi [34,473 kPa] at 275 degF [135 degC], featuring an integral hydraulic-setting assembly for one-trip operation. Plugging the string and applying pressure energize the hydraulic cylinder and set the packing elements, isolating the individual tubing strings. The packer releases by a straight pull on the long string. Both strings are available with optional tubing connections for maximum design flexibility.

Main features Hydraulic-set Retrievable For use in dual- and ESP completions

Ultra DualConventional dual-completion packer

Ultra Dual conventional dual-completion packer.

36

Ultra DualUltra Dual Conventional Dual-Completion Packer Specifi cationsCasing Size,in [mm]




OD of Tool, Max., in [mm]

Long-String Tool, Min., in [mm]

Short-String Tool, Min., in [mm]

Long-String Connection

Short-String Connection

5.75 [146.05]

1821.8 [26.7932.95] 5.142 [130.61] 5.000 [127.00] 4.812 [122.23] 1.610 [40.89] 1.380 [35.05] 1.900 1.660

1821.8 [26.7932.95] 5.142 [130.61] 5.000 [127.00] 4.812 [122.23] 1.610 [40.89] 1.380 [35.05] 1.900 2.000 sealbore1.660 top of latch1418 [20.8326.79] 5.282 [134.16] 5.142 [130.61] 4.937 [125.40] 1.610 [40.89] 1.380 [35.05] 1.900 1.660

1418 [20.8326.79] 5.282 [134.16] 5.142 [130.61] 4.937 [125.40] 1.610 [40.89] 1.380 [35.05] 1.900 2.000 sealbore1.660 top of latch

6.625[168.28]

2024 [29.7635.71] 5.921 [150.39] 6.049 [153.45] 5.750 [146.05] 1.938 [49.23] 1.610 [40.89] 2.375 1.900

2024 [29.7635.71] 5.921 [150.39] 6.049 [153.45] 5.750 [146.05] 1.938 [49.23] 1.610 [40.89] 2.375 2.500 sealbore 1.900 top of latch

7[177.80]

3238 [47.6256.65] 5.920 [150.37] 6.094 [154.79] 5.750 [146.05] 1.938 [49.23] 1.610 [40.89] 2.375 1.900

3238 [47.6256.65] 5.920 [150.37] 6.094 [154.79] 5.750 [146.05] 1.938 [49.23] 1.610 [40.89] 2.375 2.500 sealbore 1.900 top of latch2332 [34.2347.62] 6.094 [154.79] 6.336 [160.93] 5.937 [150.80] 1.938 [49.23] 1.610 [40.89] 2.375 2.375

2332 [34.2347.62] 6.094 [154.79] 6.336 [160.93] 5.937 [150.80] 1.938 [49.23] 1.610 [40.89] 2.375 2.688 sealbore2.375 top of latch1726 [25.3038.69] 6.184 [157.07] 6.538 [166.07] 6.000 [152.40] 1.938 [49.23] 1.938 [49.23] 2.375 2.375

1726 [25.3038.69] 6.184 [157.07] 6.538 [166.07] 6.000 [152.40] 1.938 [49.23] 1.938 [49.23] 2.375 2.688 sealbore2.375 top of latch

7.625[193.68]

33.739 [50.1558.03] 6.510 [165.35] 6.882 [174.80] 6.470 [164.34] 2.390 [60.71] 2.390 [60.71] 2.375 2.375

26.433.7 [39.2850.14] 6.662 [169.21] 7.07 [179.73] 6.677 [169.60] 2.390 [60.71] 2.390 [60.71] 2.375 2.375

9.625[244.48]

4753.5 [69.9479.61] 8.535 [216.79] 8.681 [220.50] 8.320 [211.33] 2.939 [74.65] 2.939 [74.65] 3.500 3.500

3647 [53.5769.94] 8.681 [220.50] 8.921 [226.59] 8.500 [215.90] 2.939 [74.65] 2.939 [74.65] 3.500 3.500

slb.com/packers


37

APPLICATIONS Vertical, deviated, or horizontal wellbores Dual production strings

BENEFITS Simultaneous running of tubing strings

saves rig time

FEATURES Can be set by the short or long string No tubing manipulation required to set

the packer No mandrel movement during setting Simultaneous mandrel movement while

the packer is being released One-piece mandrel designed with

premium connections Setting not affected by tubing weight

below the packer Both mandrels free to rotate May be run with dual strings simultaneously Tubing may be pulled without disturbing

the packer Mechanical locks that prevent

premature setting Ability to set the packer after the wellhead

is installed Elimination of mandrel movement during

setting for use in ESP installations

The Hydro-12* dual-completion packer can be run in stacked dual installations or above almost any type of single-string packer. The unique design allows the packer to be set without tubing manipulation, and both mandrels are free to rotate for ease of makeup. In addition, the short string does not move during setting, which simplifies tubing space out. Orientation of the string is performed by using an optional locking mechanism.

Main features Hydraulic-set Retrievable For use in dual completions

Setting operationThe packer is set by plugging the tubing below the setting ports in the packer and applying pressure to the setting string. Common plugging devices include pumpout plugs, pressure trip subs, and blanking plugs. The bidirectional slips anchor the packer in the casing, keeping the packer from moving upward or downward in response to differential pressure or tubing movement. This packer is suitable for applications requiring installation of the wellhead before packer setting because no tubing manipulation or movement is required.

Release operationThe Hydro-12 packer is released by a straight upward pull on either the short or the long string or simultaneously on both strings until the packers primary shear pin value is exceeded. When the packer is released, the primary and secondary mandrel movements are simultaneous. This feature permits the use of ESPs.

Hydro-12Dual-completion packer

Hydro-12 dual-completion packer.

38


Hydro-12

slb.com/packers

Hydro-12 Dual-Completion Packer Specifications



Max. OD, in [mm]

Nominal ID, Primary, in [mm]

Nominal ID, Secondary, in [mm]



7.000 [177.8] 2326 [34.2338.69] 6.089 [154.7] 1.953 [49.6] 1.953 [49.6] 275 [135] 5,000 [34,474]

9.625 [244.5] 4043.5 [59.5364.74] 8.537 [216.8] 2.399 [60.9] 2.399 [60.9] 275 [135] 5,000 [34,474]

9.625 [244.5] 4043.5 [59.5364.74] 8.537 [216.8] 2.250 [57.2] 2.250 [57.2] 275 [135] 5,000 [34,474] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

39

APPLICATIONS ESP completions Zonal isolation Vertical, deviated, or horizontal wellbores


FEATURES Hydro-test capability of

feed-through connections Ability to pressure test the system at

the surface Minimized tubing movement

during installation Reduced debris buildup above slips Easy to circulate out debris before retrieval Positive casing grip secures packer Slips located below sealing element Equalization system above the element Adjustable, straight-pull shear release Field-proven sealing element Bidirectional slips Minimized end effect on

shear-release screws Dual bore with multiple ports

The MRP-ESP modular dual-completion packer is used in vertical and deviated wells with ESP completions. Additional parallel ports are available and may be configured for chemical injection, gas vents, and ESP accessories. This packer is also designed to allow onsite feed-through and connection of electric or hydraulic conduits. Its compact, modular design makes the MRP-ESP packer an economical choice for production applications with ESPs or for gas injection.

Main features Hydraulic-set Retrievable For use in ESP completions Designed and tested in accordance with ISO 14310 V3

Installation and settingThe MRP-ESP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the MRP-ESP packer is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing, and the element relaxes. Set at the factory to a standard value, the packer shear-release mechanism can be adjusted in the field just before installation.

Cross-section.

MRP-ESPModular dual-completion packer

MRP modular dual-completion packer.

40


MRP-ESP

slb.com/packers

MRP-ESP Modular Dual-Completion Packer



Max. OD, in [mm]

Nominal ID, Primary, in [mm]

Nominal ID, Secondary, in [mm]



Number of Feed-Throughs

9.625 [244.5] 4047 [59.5369.94] 8.463 [215.0] 2.992 [76.0] 2.080 [52.8] 250 [121] 5,000 [34,474] Three 38 NPT, one 34 NPT

9.625 [244.5] 4753.5 [69.9479.62] 8.354 [212.2] 2.992 [76.0] 2.080 [52.8] 250 [121] 5,000 [34,474] Six 38 NPT Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. National Pipe Thread.

41

High Rate Gas Packers

43

APPLICATIONS High-rate production and injection wells

with high or low temperatures Interventionless single-trip completions,

desirable in environments such as deepwater and subsea wells

Vertical, deviated, and horizontal wellbores

Through-tubing recompletions

BENEFITS Minimized rig time associated with

standard setting methods Elimination of tubing movement Fewer interventions necessary

while setting Ease of retrievability

FEATURES Large-bore ID Barrel-type slip design that minimizes

casing damage Slip location below sealing element Hydrostatic setting mechanism with built-in

hydraulic contingency Robust seal that acts as debris barrier

to prevent slip fouling Low activation pressures at surface Leak-free hydrostatic chamber to ensure

packer activation at proper depth Cut-to-release retrieval Direct connection to well tubing Field-proven design based on XHP, XMP,

and QUANTUM MAX* packers

The XHP-BB* hydrostatically set big-bore premium production packer is designed for high-rate production and injection wells. These wells demand exceptional ruggedness and reliability, and, for harsh environments, require premium metallurgy and elastomers. The packer is qualified for low-temperature use in subsea injection wells, as well as for high-pressure, high-temperature environments. It withstands pressures up to 10,000 psi [68,948 kPa] and temperatures up to 350 degF [177 degC]. The XHP-BB packer is designed for closed systems, such as cased hole wells before perforating and openhole completions isolated by a formation isolation valve.

Main features Hydrostatic-set Retrievable For use in high-pressure and high-rate gas environments

Hydrostatic settingThe XHP-BB packer is installed with the completion tubing and set by pressuring the well at the surface. Rupture discs isolate the setting chamber and ensure accurate activation pressure. Because the packer is hydrostatically set, it is ideal for interventionless single-trip completions. Optionally, it can also be fully set by placing a tubing plug below it and applying pressure.

The XHP-BB packers setting chambers are located between the slips and the element. This architecture eliminates any tubing movement relative to the casing, and as a result, the slips and element are both set consistently and predictably. The slips barrel-type design minimizes casing damage, and their location below the sealing element prevents buildup of debris above them.

Cut-to-release retrievalThe packers cut-to-release feature allows multiple through-tubing interventions without the risk of unsetting the packer. The XHP-BB packer is retrieved with a through-tubing intervention tool to shear the setting mechanism and then a subsequent upward pull on the tubing.

Testing beyond ISO standardsEach XHP-BB packer is internally tested with nitrogen to ensure that the hydrostatic chamber is leak-free and will activate the packer at the proper depth. The packer is tested beyond ISO 14310/API 11D1 standards for the flow-by qualification, which ensures that element swab-off rates are quantified, and it meets the ISO 14310/API 11D1 grade V0 standard for the as-rolled customer-specific casing.

XHP-BB hydrostatically set big-bore premium production packer.

XHP-BB Hydrostatically set big-bore premium production packer

ElementVO rated

Premium barrel slipsEnsure even distribution

of load on casing

Cut-to-release zonePrevent premature release

44

XHP-BB

*Mark of SchlumbergerOther company, product, and service names are the properties of their respective owners.Copyright 2014 Schlumberger. All rights reserved. 14-CO-0182

slb.com/packers

XHP-BB Hydrostatically Set Big-Bore Premium Production Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 2932 [43.1647.62] 5.910 [150.1] 3.920 [99.6] 350 [177] 10,000 [68,948]

9.625 [244.5] 4753.5 [69.9479.62] 8.300 [210.8] 5.920 [150.4] 350 [177] 10,000 [68,948] Other sizes are available on request. ID may vary depending on connection configuration selected.

45

HPHT Packers

47

APPLICATIONS High-pressure, high-volume production Hostile downhole environments

BENEFITS Large, unobstructed bore enhances

completion options Packer can be easily milled

FEATURES Rated to 15,000 psi [103.421 kPa] at

450 degF [232 degC] Large alternate bore for increased flow Nonelastomeric sealing Full circle carbide or carburized slips Tested in Q125 casing Slip-cone interface optimized for

higher loading Element design for maximum

extrusion resistance Components keyed for easy milling Optional bottom sub configuration

compatible with all completion accessories

The Millennium* HPHT packer is designed for high-pressure, high-volume production, injection, and disposal wells.

Main features Wireline- or hydraulic-set Permanent For use in HPHT wells

Packer designThe packer features carbide or carburized slips. The packer is rated to 15,000 psi [103.421 kPa] at 450 degF [232 degC]. The packers large alternate bore enhances completions options and allows for increased flow. The multicomponent element backup system provides maximum extrusion resistance.

Setting operationThe Millennium HPHT packer is hydraulic- or wireline-set. An optional bottom sub configuration makes the packer compatible with completion accessories such as landing and seating profile nipples.

MillenniumHPHT packer

Millennium HPHT packer.

Millennium HPHT Packer Specifi cationsCasing OD, in [mm]





Alternate Bore, in [mm]

Lower Bore, in [mm]

Seal Assembly Size

Setting Tool Size

5 [127] 1821.4 [26.7931.85] 4.032 [102.41] 4.361 [110.77] 3.968 [100.79] 3 [76.2] 2.5 [63.5] 3022 20


48

APPLICATIONS Single-string production Single-trip completions Vertical, deviated, or horizontal wellbores Production or injection wells with high or

low temperatures

ADVANTAGES Slips located below the sealing element Hydraulic-setting mechanism design

that eliminates tubing movement during installation

Minimized debris buildup above slips Reduced casing damage Suitable for use in unsupported casing Capable of running in deviated wells Tensile and compressive ratings

compatible with completion tubulars Able to connect directly to well tubing Barrel-type slip design Short packer body length Premium connections available

The XHP premium production packer is a hydraulically set, retrievable packer for use in vertical and deviated wells.

Main features Hydraulic-set Retrievable For use in HPHT environments Designed and tested in accordance with ISO 14310 V0

High-pressure, high-temperature environmentsThe standard version of XHP packer is suitable for high-pressure, high-temperature environments. It is also qualified for low-temperature use in subsea injection wells.

Installation and retrievalThe XHP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the XHP is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing.

Design flexibility provides the following configuration options: setting on control line left-hand rotation disconnect retrieval by intervention with a tubing cutter.

XHPPremium production packer

XHP premium production packer.

49

XHP


slb.com/packers

XHP Premium Production Packer SpecificationsCasing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 3235 [47.6252.09] 5.810 [147.6] 2.890 [73.4] 325 [163] 10,000 [68,948]

7.750 [196.9] 46.1 [68.60] 6.440 [163.6] 2.750 [69.9] 425 [218] 10,000 [68,948]7.625 [193.7] 33.739 [50.1558.04] 6.440 [163.6] 3.350 [85.1] 325 [163] 10,000 [68,948]9.625 [244.5] 4753.5 [69.9479.62] 8.300 [210.8] 4.660 [118.4] 350 [177] 10,000 [68,948]

10.750 [273.1] 60.765.7 [90.3397.77] 9.340 [237.2] 4.600 [116.8] 270 [132] 7,500 [51,711] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

50

Intelligent Completion Packers

51

APPLICATIONS Intelligent completions Single-trip completions Completions with multiple

production zones Vertical or deviated wellbores

BENEFITS Reduced development costs with

production from multiple zones Reduced completion costs because of

economical feed-through packer platform Reduced retrieval risk due to

prevention of debris buildup above slips Reduced risk of misruns by

eliminating pipe movement during installation

FEATURES Flexible configurations that

facilitate varied completion designs Communication with devices installed

below the packer enabled by five hydraulic control lines or electrical conduits

Modular platform based on economical and field-proven Schlumberger MRP modular retrievable packer

Configuration options to suit multiple applications: straight pull-to-release, cut-to-release, and isolation

Slips located below sealing element

Hydraulic setting mechanism centrally located between element and slips

Configurations that can maintain premium connections throughout the tubing string

The MRP-MP packer series consists of tubing-conveyed, hydraulically set production and isolation packers designed for single or multizone completions. Each packer features a multiple-bypass configuration for hydraulic control line or electric conduit applications.

Main features Hydraulically set Retrievable For use in intelligent completions

Setting operationThe packer is set by applying tubing-to-annulus differential pressure. A closed flow control valve or valves, a ball seat, and a plug or other tubing-blanking device are required to set the packer. The retrieval method depends on the configuration chosen.

MRP-MPModular multiport packers

MRP-MP production packer.

MRP-MP isolation packer.

52

slb.com/packers

MRP-MP


MRP-MP Modular Multiport Packer Specifications (Straight Pull-to-Release) Casing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 2326 [34.2338.69] 6.090 [154.7] 2.922 [74.22] 250 [121] 5,000 [34,474]

7.000 [177.8] 2629 [38.6943.16] 6.000 [152.4] 2.922 [74.22] 250 [121] 5,000 [34,474]

7.000 [177.8] 2932 [43.1647.62] 5.910 [150.1] 2.922 [74.22] 250 [121] 5,000 [34,474] Affected by shear-to-release setting.

MRP-MP Modular Multiport Packer Specifications (Isolation Packer)Casing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 2326 [34.2338.69] 6.090 [154.7] 2.922 [74.22] 250 [121] 3,000 [20,684]

7.000 [177.8] 2629 [38.6943.16] 6.000 [152.4] 2.922 [74.22] 250 [121] 3,000 [20,684]

7.000 [177.8] 2932 [43.1647.62] 5.910 [150.1] 2.922 [74.22] 250 [121] 3,000 [20,684]

MRP-MP Modular Multiport Packer Specifications (Straight Pull-to-Release Performance)Casing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 2326 [34.2338.69] 6.090 [154.7] 2.922 [74.22] 250 [121] 5,000 [34,474]

7.000 [177.8] 2629 [38.6943.16] 6.000 [152.4] 2.922 [74.22] 250 [121] 5,000 [34,474]

7.000 [177.8] 2932 [43.1647.62] 5.910 [150.1] 2.922 [74.22] 250 [121] 5,000 [34,474]

MRP-MP Modular Multiport Packer Specifications (Cut-to-Release)Casing Size, in [mm]


Max. OD, in [mm]

Nominal ID, in [mm]



7.000 [177.8] 2326 [34.2338.69] 6.090 [154.7] 2.922 [74.22] 250 [121] 5,000 [34,474]

7.000 [177.8] 2629 [38.6943.16] 6.000 [152.4] 2.922 [74.22] 250 [121] 5,000 [34,474]

53

APPLICATIONS Intelligent completions Normal and hostile environments


FEATURES Unique design for preset prevention Enhanced capabilities for onsite

product customization Simultaneous setting of multiple packers

for reduced rig time Pressure-isolated multiple ports Locking screws on the body joints Packing element with integral

antiextrusion rings Component parts rotationally locked to

the mandrel Straight pickup release

The QUANTUM* MultiPort* gravel-pack multiport packer is used as the upper packer in stacked configurations in completions with surface-controlled subsurface flow-control valves and tubing-mounted reservoir monitoring equipment.

Main features Hydraulic-set Retrievable For use in intelligent completions Designed and tested in accordance with ISO 14310 V3

Connections and settingThe hydraulically set QUANTUM MultiPort packer features twin setting pistons that fully energize the sealing elements prior to anchoring the slips. This packer is designed to allow onsite feed-through and connection of electric and hydraulic conduits. Testing of control-line fittings on the packer is accomplished after feed-through. This feature greatly simplifies rig operations and reduces control line terminations. The packer features a one-piece mandrel design with an eccentric flow bore.

ReleaseBypass lines are fixed relative to the mandrel, eliminating relative movement during releasing. This design facilitates release regardless of the prevailing tubing load condition, i.e., tension or compression at the packer. The QUANTUM MultiPort packer allows simultaneous setting of multiple packers and is capable of simultaneous testing of bypass seals on the rig floor. Retrieval of the QUANTUM MultiPort packer is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing.

QUANTUM MultiPort packers are available for a variety of service applications, including H2S and CO2 environments.

QUANTUM MultiPort gravel-pack multiport packer.

QUANTUM MultiPortGravel-pack multiport packer

*Mark of SchlumbergerOther company, product, and service names are the properties of their respective owners.Copyright 2014 Schlumberger. All rights reserved. 14-CO-0114 slb.com/packers

QUANTUM MultiPort Gravel-Pack Multiport Packer SpecificationsCasing Size, in [mm]

Casing WeightRange, lbm/ft [kg/m]

Max. OD, in [mm]

Nominal ID, in [mm]


7.000 [177.8] 2629 [38.6943.16] 5.992 [152.2] 2.940 [74.7] 250 [121]

9.625 [244.5] 43.547 [64.7469.94] 8.445 [214.5] 2.940 [74.7] 250 [121]

9.625 [244.5] 4753.5 [69.9479.62] 8.345 [212.0] 2.940 [74.7] 250 [121] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected.

54

APPLICATIONS Single- and dual-zone completions Single-trip completions Intelligent completions

ADVANTAGES Capable of surface test For running in vertical, deviated, or

horizontal wellbores No damage to the casing Eliminated pipe movement by setting

mechanism design Tensile and compressive ratings

compatible with completion tubulars Short packer body length Slip below the element protected

from debris Barrel slip design suitable for

unsupported casing Premium elastomers and metallurgy Anti-preset and anti-reset mechanism Centrally located hydraulic

setting mechanism Retrievable design to eliminate damage

associated with milling Multiple bypass ports for feed-through of

hydraulic and electric lines Available in control lineset configurations

The XMP premium multiport production packer is a tubing-conveyed, hydraulic-set, retrievable packer designed for intelligent completions. It features a multiple-bypass configuration for hydraulic control line or electric conduit applications.

Main features Hydraulic-set Retrievable For use in intelligent completions Designed and tested in accordance with ISO 14310 V0

OperationThe XMP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the XMP packer is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing.

The flexible design of the XMP allows it to be ordered with several configuration options:

left-hand rotation disconnect retrieval by intervention with a tubing cutter.

XMP premium multiport production packer.

XMPPremium multiport production packer

55

XMP


slb.com/packers

XMP Premium Multiport Production Packer SpecificationsCasing Size, in [mm]

Casing Weight Range, lbm/