517
CONTENTSAREA LIGHTINGArchitectural ...............................................................................520-523
Specifi cation ...............................................................................524-532
General Purpose..........................................................................533-535
Contractor Select Stock ...................................................................... 536
BOLLARDSArchitectural ...............................................................................537-538
Specifi cation ...............................................................................539-541
WALL MOUNTEDArchitectural ...............................................................................542-546
Specifi cation ...................................................................................... 547
General Purpose..........................................................................548-555
Contractor Select Stock ...............................................................556-558
PARKING GARAGE & CANOPYSpecifi cation ...............................................................................559-562
FLOODLIGHTINGArchitectural ...............................................................................563-564
Specifi cation ...............................................................................565-569
General Purpose..........................................................................570-573
Sportslighter ...............................................................................574-575
Contractor Select Stock ...............................................................576-578
OPTIONS & ACCESSORIES ............................................579-583
NIGHTTIME FRIENDLY LIGHTING ...............................584-585
DESIGN GUIDELINES ........................................................586-587
POLESGeneral Information....................................................................588-589
Steel............................................................................................590-596
Aluminum...................................................................................598-605
Fiberglass....................................................................................606-607
Concrete......................................................................................608-609
Wood ................................................................................................. 611
Options & Accessories ............................................... 597, 610, 612-615
LITHO
NIA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com518
LITH
ON
IA O
UTD
OO
R
ALX Series LED Area Luminaire
Breaks from the mold of traditional area lighting with high-performance LED illumination. Advanced thermal management and state-of-the-art optical design, combine to offer the fi rst LED-alternative to meet the application demands previously served only by HID.
www.lithonia.com/ALX-LED
TWF Full Cut-off Wall Pack
A contemporary solution for commercial applications requiring a Nighttime Friendly™ wall pack. Precision-engineered refl ector packages and a die-cast housing ensure reliable performance.
www.lithonia.com/TWF
Emergency LED (ELED) Egress Option
An LED source alternative for egress illumination. Paired with either HID or CFL luminaires from the architectural sconce line, the ELED option provides a solution for higher mounting height, cold weather application and source redundancy egress challenges for egress lighting.
www.lithonia.com/ELED
POLES CENTRAL
One central location for everything you need to know when selecting or installing a pole with your lighting fi xture. Lithonia Lighting offers the widest selection of pole products from any single source; available in steel, aluminum, wood, fi berglass and concrete.
www.lithonia.com/Poles
OMEROTM FAMILY
style, versatility, performanceARCHITECTURAL DISTINCTION FROM TOP TO BOTTOM, the contemporary OMERO design combines dayform aesthetics with industry-leading nighttime performance. The fl owing lines and graceful curves are carried throughout the family and provide application versatility from wall mount to site and area applications.
Optional decorative arm and pole bases complement the fi xtures.
For more information, visit www.lithonia.com/Omero
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com520
AR
EA L
IGH
TIN
GArchitectural
AS ASTAeris™
Series Lamp type1 Distribution1 Voltage Ballast Mounting14
AS1
AS2
AST1
AST2
High pressure sodium2
35S3
50S4
70S
100S
150S
200S
250S
400S
Metal halide
50M2, 5
70M2, 5
100M2
150M
175M6
200M7
250M
320M7
400M
Metal halide ceramic8
50MHC2, 5
70MHC2, 5
100MHC2
150MHC
Compact fluorescent
2/32TRT9
42 TRT
2/42TRT9
57TRT
70TRT
SR2 Type II segmented
SR3 Type III segmented
SR4SC Type IV segmented, FT, sharp cutoff
SR4W Type IV segmented, FT, wide
SR5S Type V segmented, square
120
20810
24010
277
347
48010
TB11
23050HZ12
MVOLT13
(blank) Magnetic ballast
CWI Constant wattage isolated12
SCWA Super CWA ballast
Ships included
SPA Square pole mounting block
RPA Round pole mounting block
WBA Wall bracket (up or down)15
Ships separately16, 17
ASKMA1 AS1 mast arm adaptor
ASKMA2 AS2 mast arm adaptor
DCAS1 AS1 Deco arm for square pole
DCAS1R AS1 Deco arm for round pole
DCAS2 AS2 Deco arm for square pole
DCAS2R AS2 Deco arm for round pole
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V18
DF Double fuse, 208V, 240V, 480V18
GMF Internal slow-blow fusing
ELDW Bodine emergency battery backup18
EC Emergency circuit18, 19
QRS Quartz restrike system18, 19
PER NEMA twist-lock receptacle only20
HS House-side shield21
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately16
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard22
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For streets, walkways, parking
lots and surrounding areas.
Construction
Housing: Rugged, die-cast,
single-piece aluminum
housing with nominal 1/8"
wall thickness.
Door Assembly: Die-cast
doorframe, impact-resistant,
tempered glass lens, 3/16"
thick, fully sealed with one-
piece tubular silicone gasket.
Finish: Standard finish is dark
bronze polyester powder
finish. Additional architec-
tural colors available; see
www.lithonia.com/archcolors.
Optics
Anodized segmented reflec-
tors for superior uniformity
and control. Reflectors attach
with tool-less fasteners
and are rotatable and
interchangeable. Four full
cutoff distributions available:
Type II (roadway), Type
III (asymmetric), Type IV
(forward throw), and Type V
(symmetric square).
Electrical
Ballasts: Mounted on remov-
able power tray and have
positive locking disconnect
plugs. All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only. CSA,
NOM or INTL required for
probe start shipments outside
the U.S. Compact fluorescent
uses an electronic high-
frequency ballast.
Socket: Porcelain, medium-
base socket for AS1, mogul-
base socket for AS2, with
copper alloy nickel-plated
screw shell and center con-
tact. Ceramic metal halide
lamps are recommended for
use in applications where
superior color rendition,
lumen maintenance and
longer lamp life are desired.
Fluorescent is four-pin posi-
tive latching thermoplastic.
LPI is standard 35K for CFL.
Installation
Heavy-duty easy-mount
block attaches to pole or wall
to provide ease of installation
as well as ensured alignment
and leveling. Additional
backing plate and receiver
used to mount AST suspend
tension rod. AST1 mounts
9.64" lower than specified
pole height. AST2 mounts
13.89" lower than specified
pole height.
Listings
UL Listed (standard). CSA Cer-
tified or NOM Certified (see
Options). UL Listed for 25 °C
ambient and wet locations.
U.S. Patent No. D447, 590.
Canadian Patent No. 94324.
IP65 Rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: AS1 150M SR2 TB SPA LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
6-1/4(15.9)
22-1/4(56.5)
13(33.0)
AS1/AST1 EPA: 0.7ft2 (.07 m2)
Max. weight: 25.9 lbs (11.7 kg)
8-1/4(21.0)
28-1/2(72.4)
17(43.2)
AS2/AST2 EPA: 1.2ft2 (1.1 m2) Max. weight: 40 lbs (18.2 kg)
Notes1 Specify lamp type and distribution. See
Configurations table.
2 Not available with SCWA.
3 120V only.
4 120V and 277V only.
5 Not available with 480V.
6 Not available AS1/AST1 SCWA.
7 Must be ordered with SCWA.
8 Not applicable with L/LP.
9 Available in SR3 only.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Consult factory for available wattages.
13 Multi-volt electronic ballast (compact
fluorescent only) capable of operating on any line voltage between 120V and 277V.
14 Mounting block included standard.
15 Mounted in lens up orientation, fixture is damp location rated. AST available in down orientation only.
16 May be ordered as accessory. Not available with AST.
17 Must specify finish.
18 SF, DF, QRS, EC, or ELDW options cannot be ordered together.
19 Maximum allowable wattage lamp included.
20 Photocell not included.
21 SR2, SR3, SR4W only.
22 Prefix with fixture name and size (e.g., AS1VG).
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
AS1, AST135S, 50S, 50M, 50MHC, 70S, 70M, 70MHC,
100S, 100M, 100MHC,150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT
SR2, SR3,SR4SC, SR5S
AS1, AST1 2/32TRT, 2/42TRT SR3
AS2, AST2175M, 200S, 200M, 250S, 250M, 320M,
350M, 400S, 400MSR2, SR3, SR4SC, SR4W,
SR5S
DRILLING PATTERNS(SEE POLE ORDERING, PAGE 588)
DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
521www.lithonia.com | 1-800-279-8041PSG10
Architectural AR
EA LIG
HTIN
G
MR MRT
Omero™
Series Lamp type1 Distribution1 Voltage Ballast Mounting14
MR1
MR2
MRT1
MRT2
High Pressure Sodium2
35S3
50S4
70S
100S
150S
200S
250S
400S
Metal Halide
50M2, 5
70M2, 5
100M2
150M
175M6
200M7
250M
320M7
350M7
400M
Metal halide ceramic8
50MHC2, 5
70MHC2, 5
100MHC2
150MHC
Compact fluorescent
2/32TRT9
42 TRT
2/42TRT9
57TRT
70TRT
Induction
100IL
150IL
SR2 Type II segmented
SR3 Type III segmented
SR4SC Type IV segmented, FT, sharp cutoff
SR4W Type IV segmented, FT, wide
SR5S Type V segmented, square
120
20810
24010
277
347
48010
TB11
23050HZ12
MVOLT13
(blank) Magnetic ballast
CWI Constant wattage isolated12
SCWA Super CWA ballast
Ships included
SPA Square pole mounting block
RPA Round pole mounting block
WBA Wall bracket (up or down)15
Ships separately16, 17
DCMR1 MR1 Deco arm for square pole
DCMR1R MR1 Deco arm for round pole
DCMR2 MR2 Deco arm for square pole
DCMR2R MR2 Deco arm for round pole
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
QRS Quartz restrike system18
EC Emergency circuit18
PER NEMA twist-lock receptacle only19
TP Tamperproof
HS House-side shield20
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately16
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard21
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended UseStreets, walkways, parking lots and surrounding areas.
ConstructionHousing: Rugged, die-cast, single-piece aluminum housing with nominal wall thickness of 1/8". Door assembly: Die-cast door-frame has impact-resistant, tempered glass lens (3/16" thick), fully gasketed with one-piece tubular silicone. Finish: Dark bronze polyester powder f inish standard. Additional architectural colors available, see www.lithonia.com/archcolors.
Optics MIRO finish, segmented reflectors for superior unifor-
mity and control. Reflectors attach with tool-less fastener and are rotatable and inter-changeable. Four full cutoff distributions available.
Electrical Ballasts: Mounted on remov-able power tray and have positive locking disconnect plugs. All ballasts are 100% factory tested. High reac-tance, high power factor for 150W and below. Constant wattage autotransformer 175W and above. MH: 150W and below are standard with pulse-start ignitor technol-ogy. Super CWA Pulse Start ballasts, 88% efficient and EISA legislation compliant, are required for 151-400W (must order SCWA option) for
U.S. shipments only. CSA, NOM or INTL required for probe start shipments outside the U.S. Compact fluorescent uses an electronic high-frequency ballast. High-frequency generator for Induction.
Socket: Porcelain, medium-base socket for MR1, mogul-base socket for MR2, with copper alloy nickel-plated screw shell and center contact. Ceramic metal halide lamps are recommended for use in applications where superior color rendition, lumen maintenance and longer lamp life are desired. Fluorescent is four-pin posi-tive latching thermoplastic. LPI is standard 35K for CFL.
Installation Heavy-duty easy-mount block attaches to pole or wall to provide ease of installation as well as ensured alignment and leveling. Additional backing plate and receiver used to mount MRT suspend tension rod. MRT1 mounts 9.64" lower than specified pole height. MRT2 mounts 13.89" lower than specified pole height.
ListingsListed and labeled to UL stan-dards for wet locations. Listed and labeled to CSA standards (see Options). NOM Certified (see Options). IP65 Rated. U.S. Patent No. D556,357.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: MR1 150M SR3 TB SPA LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
MR1, MRT135S, 50S, 50M, 50MHC, 70S, 70M, 70MHC, 100S,
100M, 100MHC, 150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT
SR2, SR3, SR4SC, SR5S
MR1, MRT1 2/32TRT, 2/42TRT SR3MR1, MRT1 100IL Not applicableMR2, MRT2 175M, 200S, 200M, 250S, 250M, 320M, 350M, 400S, 400M SR2, SR3, SR4SC, SR4W, SR5SMR2, MRT2 150IL Not applicable
DRILLING PATTERNS(SEE POLE ORDERING, PAGE 588)
DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)
25(63.5)
8-1/4(21.0)
18-5/8(47.3)
24-1/2(62.2)
33(83.8)
6-3/8(16.2)
MR1/MRT1 MR2/MRT2 EPA: 0.54ft2 (0.05 m2) 0.91ft2 (0.08 m2) Max. weight: 27 lbs (12.2 kg) 46 lbs (20.9 kg)
Induction weight: 35 lbs (15.9 kg)
Notes1 Specify lamp type and distribu-
tion. See Configurations table.
2 Not available with SCWA.
3 120V only.
4 120V and 277V only.
5 Not available with 480V.
6 Not available MR1/MRT1 SCWA.
7 Must be ordered with SCWA.
8 Not applicable with L/LP.
9 Available in SR3 only.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Consult factory for available wattages.
13 Multi-volt electronic ballast
(Compact fluorescent and Induction only) capable of operating on any line voltage between 120V and 277V.
14 Mounting block included standard.
15 Mounted in lens up orientation, fixture is damp location rated. MRT available in down orienta-tion only.
16 May be ordered as accessory. Not available with MRT.
17 Must specify finish.
18 Maximum allowable wattage lamp included.
19 Photocell not included.
20 SR2, SR3, SR4W only.
21 Prefix with fixture name and size (e.g., MR1VG).
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com522
ArchitecturalA
REA
LIG
HTI
NG
Series Lamp type1 Distribution1 Voltage Balast Mounting
MRP High pressure sodium2
50S
70S
100S
150S
Metal halide
70M2,3
100M2
150M
175M4
Metal halide ceramic5
70MHC2,3
100MHC2
150MHC
Compact fl uorescent
2/32TRT6
42 TRT
2/42TRT6
57TRT
70TRT
Induction
100IL
SR2 Type II segmented
SR3 Type III segmented
SR4SC Type IV segmented, FT, sharp cutoff
SR5S Type V segmented, square
120
2087
2407
277
347
4807
TB8
23050HZ9
MVOLT10
(blank) Magnetic ballast
CWI Constant wattage isolated9
SCWA Super CWA ballast11
Ships installed
(blank) 4" round open-top pole
Ships separately12, 13
MRPF3 4" to 3" O.D. round open-top pole fi tter
MRPF5 4" to 5" O.D. round open-top pole fi tter
MRPT20 MRP 2-3/8" tenon slipfi tter
MRPT25 MRP 2-7/8" tenon slipfi tter
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
EC Emergency circuit14
QRS Quartz restrike system14
PER NEMA twist lock receptacle only15
TP Tamperproof
HS House-side shield16
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL International shipment for 175M
Ships separately12
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard17
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
MRPOmero™
Intended Use
Streets, walkways, parking
lots and surrounding areas.
Construction
Rugged, die-cast, single-piece
aluminum housing with nomi-
nal wall thickness of 1/8".
Die-cast, top-access door-
frame has impact-resistant,
tempered glass lens (3/16"
thick). Doorframe is fully
gasketed with one-piece
tubular silicone.
Finish: Standard fi nish is dark
bronze corrosion-resistant
polyester powder finish.
Additional architectural
colors are available; see
www.lithonia.com/archcolors.
Optics
MIRO fi nish, segmented
refl ectors for superior
uniformity and control. Re-
fl ectors attach with tool-less
fastener and are rotatable
and interchangeable. Four
full cutoff distributions
available: Type II (roadway),
Type III (asymmetric), Type
IV (forward throw) and Type
V (symmetric square). Not ap-
plicable with Induction.
Electrical
Ballasts: Mounted on remov-
able power tray and have
positive locking disconnect
plugs. All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W. MH: CSA, NOM or
INTL required for probe start
shipments outside of the
US for 175M. Not available
175M SCWA. Compact
fl uorescent uses an electronic
high-frequency ballast. High-
frequency generator for
Induction.
Socket: Porcelain, medium-
base socket with copper
alloy nickel-plated screw
shell and center contact.
Ceramic metal halide lamps
are recommended for use in
applications where superior
color rendition, lumen main-
tenance and longer lamp
life are desired. Fluorescent
is four-pin positive latching
thermoplastic. LPI is standard
35K for CFL.
Installation
Mounts to a 4" round
open-top pole. Optional
mounting available.
Listings
Listed and labeled to UL
standards for wet locations.
Listed and labeled to CSA
standards (see Options).
NOM Certifi ed (see Options).
Optical chamber is IP65 rated.
U.S. Patent No. D553,779.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: MRP 150M SR3 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
MRP50S, 70S, 70M, 70MHC, 100S, 100M,
100MHC, 150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT
SR2, SR3, SR4SC, SR5S
MRP 2/32TRT, 2/42TRT SR3MRP 100IL Not applicable
Notes1 Specify lamp type and distribution. See Confi gurations table.
2 Not available with SCWA.
3 Not available with 480V.
4 Not available with SCWA. Requires CSA, NOM, or INTL.
5 Not applicable with L/LP.
6 Available in SR3 only.
7 Must specify CWI for use in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Consult factory for available wattages.
10 Multi-volt electronic ballast (Compact fl uorescent and Induction only) capable of operating on any line voltage between 120V and 277V.
11 Only available with 150M or 150MHC.
12 May be ordered as accessory.
13 Must specify fi nish.
14 Maximum allowable wattage lamp included.
15 Photocell not included.
16 SR2, SR3 only.
17 Order as MR1VG as an accessory.
6-3/8(16.2)
32(81.3)
18(45.7)
Weight: 33 lbs (15.0 kg)EPA: 1.125 ft 2
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
523www.lithonia.com | 1-800-279-8041PSG10
LITHO
NIA
OU
TDO
OR
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
AR
EA LIG
HTIN
G
Series Lumen output Distribution Voltage Mounting2 Options Finish
ALX1
ALX2
7000L
14000L
21000L
28000L
SR3 Type III asymmetric
SR4 Type IV forward throw
SR5 Type V symmetric
480
MVOLT1
SPA Square pole mounting block
RPA Round pole mounting block
WBA Wall bracket (down only)3
Installed
PER NEMA twist-lock receptacle only
HS House-side shield
DS Dual-switching
Shipped separately4
SC Shorting cap for PER option
DSSPE127 NEMA solid state twist-lock PE (120V/240V/277V)
(blank) Dark bronze (std.)
DBL Black
DNA Natural aluminum
DWH White
ALXIntended Use
Streets, walkways, parking
lots, and surrounding areas.
Construction
Rugged, die-cast, single-
piece aluminum housing.
Unique fl ow-through
design for optimized thermal
management. Modular
design allows for ease of
maintenance and potential
for future system upgrades.
Integral arm provides easy
installation to a pole or wall
(ALX1 only). Metallic screen
covers the top of the housing
preventing debris buildup
while allowing for airfl ow.
Housing completely sealed
against moisture or environ-
mental contaminants. Low
profi le design minimizes
wind loading.
Door assembly: Die-cast
doorframe enclosing driver
chambers. Doorframe is fully
gasketed with one-piece
tubular silicone.
Finish: Standard fi nish is dark
bronze (DDB) corrosion-
resistant polyester powder
coat. Additional architectural
colors available, see
www.lithonia.com/archcolors.
Optics
Individual, precision molded
lens assemblies provide
optimal luminaire spacing and
improved uniformity. Three
full cutoff systems available:
Type III (asymmetric), Type
IV (forward throw), Type V
(symmetric). House side shield
available to limit light trespass.
Electrical
Utilizes high-effi ciency LEDs
mounted to a metal core
circuit board and aluminum
heat sink, ensuring optimal
thermal management. 5100°
Kelvin temperature, CRI>70.
Standard drivers are 120v
through 277v, 50 hz to 60 hz
operation. Contact factory
for other voltages. Electronic
drivers are accessible through
hinged door. LED drivers
have power factor >90%
and THD <20%. 28000L
and 14000L lumen package
luminaires can be wired for
two circuit operation.
Installation
Heavy duty mounting block
attaches to pole or wall to
provide ease of installation
as well as ensured alignment
and leveling. ALX pole mount
luminaires utilize the Aeris
Series pole drilling pattern.
Listings
UL Listed for 25°C ambient
and wet locations. IP65 rated
(pending). Down orientation
only. Patents pending.
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: ALX1 7000L SR5 MVOLT SPA
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com
Notes1 Multi-volt electronic ballast capable of operating on any line voltage
from 120V-277V.
2 Refer to technical data section in Outdoor binder for drilling template.
3 Available with the ALX1 only.
4 May be ordered as an accessory.
Specifi cation subject to change. Consult www.lithonia.com/ALX-LED for latest information.
Architectural
ALX2
ALX1
23-1/2(59.7)
18-3/8(46.7)
5-7/8(14.7)
ALX1
35-3/8(89.7)
18-3/8(46.7)
5-7/8(14.7)
ALX2
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com524
SpecificationA
REA
LIG
HTI
NG
KSFSpec-Form®
Series Lamp type1 Distribution Voltage Ballast Mounting
KSF1
KSF2
KSF3
High pressure sodium2
70S
100S
150S
250S
400S
1000S
Metal halide
100M2
150M
175M3
200M4
250M
320M4, 5
350M4, 5
400M5
1000M6
Metal halide ceramic7
100MHC2
150MHC
R2 Type II roadway8
R3 Type III asymmetric
R4 Type IV, FT9, 10
R4SC Type IV, FT, sharp cutoff8
R4W Type IV, FT, wide8, 9
R5S Type V symmetric square9
120
20811
24011
277
347
48011
TB12
23050HZ13
(blank) Magnetic ballast
CWI Constant wattage isolated13
SCWA Super CWA ballast
Arm mounting
SP04 4" arm for square pole14
RP04 4" arm for round pole14
WB04 4" arm for wall
WW04 4" arm for wood pole or wall
SP09 9" arm for square pole14
RP09 9" arm for round pole14
WB09 9" arm for wall
WW09 9" arm for wood pole or wall
SP12 12" arm for square pole
RP12 12" arm for round pole
WB12 12" arm for wall
WW12 12" arm for wood pole or wall
Optional mounting, ships separately15, 16
KMA External mast arm adaptor
DA12P 12" degree arm for pole
DA12WB 12" degree arm for wall
KTMB Twin mounting bar
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit17
QRS Quartz restrike system17
PER NEMA twist-lock receptacle only18
KW1 Kilowatch 120V control19
KW4 Kilowatch 277V control19
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately15
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
HS House-side shield20
VG Vandal guard20
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For car lots, street lighting or
parking areas.
Construction
Housing: Rugged,
heavy-gauge, aluminum
rectilinear housing. All seams
continuously welded for
weathertight integrity.
Doorframe: Natural anod-
ized, extruded aluminum
frame with mitered corners,
retained with two hinge
pins and secured with one
quarter-turn, quick-release
fastener. Integrally designed,
extruded silicone gasket
provides weatherproof seal
between housing and frame.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Optics: Anodized segmented
reflectors provide superior
uniformity and control. KSF1/
KSF2 reflectors are rotatable
and interchangeable. KSF3
Type IV is rotatable. Five cut-
off distributions available: R2
(roadway), R3 (asymmetric),
R4SC (forward throw, sharp
cutoff), R4W (wide, forward
throw), R5S (square).
Lens: .125" thick, impact-
resistant tempered glass
with thermally applied, silk-
screened power door shield.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All bal-
lasts are 100% factory
tested. High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Horizontally oriented,
mogul-base porcelain socket
for 175W and above, medium
base for 150W and below,
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W-
600V, 4KV pulse rated.
Installation
Mounting: Extruded alu-
minum arm for square pole
mounting shipped in fixture
carton as standard. Optional
mountings available.
Listings
UL Listed (standard). CSA Cer-
tified or NOM Certified (see
Options). UL Listed for 25°C
ambient and wet locations.
IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KSF1 250S R3 TB SP09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Specify lamp type and distribution. See
Configurations table.
2 Not available with SCWA.
3 Universal, mogul base lamp allows KSF to be available with SCWA.
4 Must be ordered with SCWA.
5 Must use ED28 lamp.
6 Must use BT37 lamp with R5S.
7 Not applicable with L/LP.
8 Not available KSF3.
9 Not available KSF1.
10 Not available KSF2.
11 Must specify CWI for use in Canada.
12 Optional multi-tap ballast (120V, 208V,
240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
13 Consult factory for available wattages.
14 KSF1, KSF2 must use 9" arm, KSF3 must use 12" arm when mounting two luminaires at 90°.
15 May be ordered as accessory.
16 Must specify finish.
17 Maximum allowable wattage lamp included.
18 Photocell not included.
19 Available with 150S, 250S and 400S only.
20 Prefix with fixture name and size. VG: KSF1VG, KSF2VG. HS: KSF1HS, KSF2HS (for use with R2 or R3); KSF3HS (for use with R3 or R4).
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KSF170S, 100S, 100M, 100MHC, 150S,
150M, 150MHC, 175M, 200M, 250MR2, R3, R4SC
KSF2 250S, 320M, 350M, 400S, 400M R2, R3, R4SC, R4W, R5SKSF3 1000S, 1000M R3, R4, R5S
H
L W
KSF1 KSF2 KSF3 EPA: 1.5 ft2 (0.14 m2) 2.0 ft2 (0.19 m2) 3.0 ft2 (0.28m2) Length: 21-1/4 (54.0) 24-5/8 (62.5) 29-5/8 (75.2) Width: 15-1/2 (39.3) 17-3/4 (45.1) 23-5/8 (59.9) Height: 7-1/4 (18.4) 8-3/8 (21.1) 10-1/2 (26.7) Max. weight: 35 lbs (15.9 kg) 52 lbs (23.6 kg) 80 lbs (36.3 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
525www.lithonia.com | 1-800-279-8041PSG10
AR
EA LIG
HTIN
GSpecifi cation
KSF POLE COMBOSpec-Form®
Intended Use
For parking areas, street
lighting, walkways and
car lots.
Construction
Housing: Rugged, .063" thick,
aluminum rectilinear hous-
ing. Formed for weather-
tight seal and integrity.
Doorframe: Naturally anod-
ized, extruded, aluminum
door frame with mitered
corners is retained with two
hinge pins and secured with
a quarter-turn fastener.
Impact-resistant, tempered
glass lens is fully gasketed
with one-piece tubular silicone.
Finish: Dark bronze polyester
powder fi nish.
Optics
Anodized aluminum
segmented refl ectors. IES
cutoff distributions: R3
(asymmetric), R4SC (forward
throw, sharp cutoff ), or
R4W (forward throw, wide).
Optional houseside shield
(HS) available.
Electrical
Ballast: All ballasts are 100%
factory tested. Super CWA
Pulse Start ballasts, 88%
effi cient and EISA legislation
compliant, are required; must
order SCWA option.
Socket: Porcelain, horizon-
tally oriented mogul base
socket with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W, 600V. Lamp included.
Installation
Extruded aluminum arm for
square pole mounting.
Listings
UL Listed (standard). UL
Listed for 25°C ambient and
wet locations. IP65 Rated.
Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast Options
Series Lamp type Pole height
KS1 1 fi xture 250M 16C 16-foot "C" pole
KS2 2 fi xtures 320M 20C 20-foot "C" pole
400M 25C 25-foot "C" pole
30C 30-foot "C" pole1
R3 Type III asymmetric
R4SC Type IV, FT, sharp cutoff
R4W Type IV, FT, wide
4C
5C1
(blank) 4 inches
09 9 inches
SCWA Super CWA ballast2 HS House-side shield3
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: KS2400M25C R3 4C SCWA
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
KS2400M25C R3 4C SCWA CONSISTS OF QUANTITY CI CODE DESCRIPTION
1 SSS 25 4C DM28 PL DDB SHAFT2 KSF2 400M R3 TB SCWA SP04 LPI1 SBC4 DDB U1 ABSSS-4C1 STC-4 U
MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KS1 SINGLE KS2 DOUBLE
16' 4C 4" or 9" arm 100 10020' 4C 4" or 9" arm 100 10025' 4C 4" or 9" arm 90 8030' 5C 4" or 9" arm 90 80
Notes1 Only available 30'/5C.
2 Must be specifi ed.
3 Ships separately. Not available with R4SC.
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
KSF POLE COMBO EPA: 2.0 ft2 (0.19 m2) Length: 24-5/8 (62.5) Width: 17-3/4 (45.1) Height: 8-3/8 (21.3) Max. weight: 52 lbs (23.6 kg)
H
L W
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com526
AR
EA L
IGH
TIN
GSpecification
KSESymmetra™
Series Lamp type1 Distribution1 Voltage Ballast Mounting
KSE1
KSE2
High pressure sodium2
70S
100S
150S
250S
400S
Metal halide
100M2
150M
175M3
200M4
250M
320M4
350M4, 5
400M5
Metal halide ceramic6
100MHC2
150MHC
R2 Type II roadway
R3 Type III asymmetric
R4SC Type IV, FT, sharp cutoff
R4W Type IV, FT, wide7
R5S Type V symmetric square7
120
2088
2408
277
347
4808
TB9
23050HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated10
SCWA Super CWA ballast
Ships included
SP04 4" arm for square pole11
RP04 4" arm for round pole11
WB04 4" arm for wall
SP09 9" arm for square pole
RP09 9" arm for round pole
WB09 9" arm for wall
Ships separately12, 13
KMA External mast arm adaptor
DA12P 12" degree arm for pole
DA12WB 12" degree arm for wall
KTMB Twin mounting bar
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit14
QRS Quartz restrike system14
PER NEMA twist-lock receptacle only15
KW1 Kilowatch 120V control16
KW4 Kilowatch 277V control16
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately12
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
HS House-side shield16
VG Vandal guard16
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For car lots, street lighting or
parking areas.
Construction
Housing: Rugged, heavy-
gauge, extruded aluminum
housing. Square shape,
seam-welded and internally
sealed for weathertight in-
tegrity.
Doorframe: Natural anod-
ized, extruded aluminum
doorframe sealed to housing
by silicone closed-cell
gasket and secured with one
quarter-turn closing screw.
Can be hinged from any of
the four sides.
Finish: Standard finish is dark
bronze polyester powder.
Additional architectural colors
and striping available, see
www.lithonia.com/archcolors.
Optics
Anodized, segmented
reflectors for uniformity
and control. Reflectors are
tool-less, rotatable and
interchangeable. Five cutoff
distributions available: R2
(roadway), R3 (asymmetric),
R4SC (forward throw, sharp
cutoff), R4W (wide, forward
throw) and R5S (symmetric).
Lens: 0.125"-thick, impact-
resistant tempered glass.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All bal-
lasts are 100% factory
tested. High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Horizontally oriented,
mogul-base porcelain socket
for 175W and above, medium
base for 150W and below,
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W-
600V, 4KV pulse rated.
Installation
Mounting: Extruded 4" alu-
minum arm for square pole
mounting, shipped in fixture
carton as standard. Optional
mountings available.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KSE1 150M R3 277 SP09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KSE170S, 100S, 100M, 100MHC, 150S, 150M,
150MHC, 175M, 200MR2, R3, R4SC
KSE2 250S, 250M, 320M, 350M, 400S, 400M R2, R3, R4SC, R4W, R5S Notes1 Specify lamp type and distribution.
See Configurations table.
2 Not available with SCWA.
3 Universal, mogul base lamp allows KSE to be available with SCWA.
4 Must be ordered with SCWA.
5 Must use ED28 lamp.
6 Not applicable with L/LP.
7 Not available KSE1.
8 Must specify CWI for use in Canada.
9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
10 Consult factory for available wattages.
11 Use 9" arm when mounting two luminaires at 90°.
12 May be ordered as an accessory.
13 Must specify finish.
14 Maximum allowable wattage lamp included.
15 Photocell not included.
16 Available with 150S, 250S and 400S only.
17 Prefix with fixture name and size. VG: KSE1VG, KSE2VG. HS: KSE1HS, KSE2HS (for use with R2 or R3).
SquareArm
H
KSE1 KSE2 EPA: 1.3 ft2 (.12m2) 1.9 ft2 (.18m2) Square: 15-3/4 (40.0) 19 (48.3) Height: 8-3/4 (22.2) 11 (27.9)Max. weight: 26.6 lbs (12.1 kg) 39.9 lbs (18.1 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
527www.lithonia.com | 1-800-279-8041PSG10
AR
EA LIG
HTIN
GSpecification
Series Lamp type1 Distribution1 Voltage Ballast Mounting
KVE2
KVE3
High pressure sodium2
250S
400S
750S
1000S
Metal halide
175M3
200M4
250M
320M4
350M4
400M
750M4
1000M
Horizontal lamp5
R2 Type II roadway6
R3 Type III asymmetric6
R4SC Type IV, FT, sharp cutoff6
R4W Type IV, FT, wide7
R5S Type V symmetric square7
Vertical lamp
SYM Symmetric
SYMC Symmetric, cutoff
ASY Asymmetric
ASYC Asymmetric, cutoff5
120
2088
2408
277
347
4808
TB9
23050HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated10
SCWA Super CWA ballast
Arm mounting11
SPV04 4" square pole arm
RPV04 4" round pole arm
SPV06 6" square pole arm
RPV06 6" round pole arm
SPV09 9" square pole arm
RPV09 9" round pole arm
SPV12 12" square pole arm
RPV12 12" round pole arm
SPV14 14" square pole arm
RPV14 14" round pole arm
WBV09 9" wall bracket
WWV09 9" wood pole or wall arm
Post-top mounting
PT4 Post top 4" OD open top pole
PT45 Post top, 4-½" OD open-top pole
PT5 Post top, 5" OD open-top pole
PT6 Post top, 6" OD open-top pole
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit12
QRS Quartz restrike system12
PER NEMA twist-lock receptacle only
KW1 Kilowatch 120V control13
KW4 Kilowatch 277V control13
GFL Glass flat lens14
LS Lamp support (size 3 horizontal optics only)
HS House-side shield
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately15
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
KVEIntended Use
For streets, parking lots and
surrounding areas.
Construction
Housing: Square, rugged,
heavy-gauge, extruded alumi-
num housing. Fully gasketed
for weather-tight integrity.
Finish: Dark bronze polyester
powder finish standard. Ad-
ditional architectural colors
and striping available, see
www.lithonia.com/archcolors.
Optics
Segmented, anodized alumi-
num optics are interchange-
able and rotatable. Vertically
lamped sealed optics include
symmetric, symmetric cutoff,
asymmetric and asymmetric
cutoff. Design redirects light
around arc-tube for optimum
lamp life and maximum
efficiency. Five horizontal
lamp cutoff distributions
available: R2 (roadway), R3
(asymmetric), R4SC (forward
throw, sharp cutoff) R4W
(wide, forward throw) and
R5S (symmetric).
Lens: Impact-resistant,
clear, 3/16 " thick, tempered
drop lens.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All ballasts
are 100% factory tested.
Constant wattage autotrans-
former 175W and above.
Super CWA Pulse Start bal-
lasts, 88% efficient and EISA
legislation compliant, are
required for 175-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Mogul-base porcelain
socket with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V, 4KV pulse rated
(5KV for 1000S).
Installation
Mounting: Extruded
aluminum arm with integral
splice compartment for wall
or pole mounting is shipped
in fixture carton. Optional
mountings available.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations. U.S. Patent No.
D417,026.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVE2 400S SYM TB SPV12 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KVE2175M, 200M, 250S, 250M, 320M, 350M,
400S, 400M
SYM, SYMC, ASY, ASYC, R2, R3, R4SC, R5S
KVE3400S, 400M, 750S,
1000SSYM, ASY, ASYC, R5S
KVE3 750M, 1000MSYM, SYMC, ASY, ASYC, R2,
R3, R4SC, R5S, R4W
Notes1 Specify lamp type and distribution.
See configurations table.
2 Not available with SCWA.
3 Universal, moguel base lamp allows KVE to be available with SCWA.
4 Must be ordered with SCWA.
5 KVE2 320W, 350W, 400W MH requires ED28 lamp; KVE3 1000W MH requires BT37 lamp. Not available with KVE3 1000S.
6 Not available KVE3 high pressure sodium.
7 Only available KVE3 metal halide; 1000M requires BT37 lamp.
8 Must specify CWI for use in Canada.
9 Optional multi-tap ballast (120V,
208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
10 Consult factory for available watt-ages.
11 KVE2 must use 12" arm, KVE3 must use 14" arm when mounting two luminaires at 90°.
12 Maximum allowable wattage lamp included.
13 Available only with 200M, 400M SCWA: ASY or SYM; 250S or 400S: all distributions.
14 400W maximum.
15 May be ordered as accessory.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
L/W
KVE2 (arm) KVE3 (arm) KVE2 (post) KVE3 (post) EPA: 3.3 ft2 (0.31 m2) 4.2 ft2 (0.39 m2) 3.4 ft2 (0.32 m2) 4.5 ft2 (0.42 m2) Length/width: 25 (63.5) 29 (73.7) 25 (63.5) 29 (73.7)
Overall Height: N/A N/A 23-7/8 (60.6) 29-1/4 (74.3) Height: 16-3/4 (42.5) 18-1/2 (47.0) 16-3/4 (42.5) 18-1/2 (47.0) Max. weight: 77 lbs (34.9 kg) 87 lbs (39.5 kg) 87 lbs (39.5 kg) 97 lbs (44.0 kg)
HOH
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com528
SpecificationA
REA
LIG
HTI
NG
KVF
Series Lamp type1 Distribution1,9 Voltage Ballast Mounting15
KVF1
KVF2
High pressure sodium2
70S
100S
150S
250S
400S
1000S4
Metal halide
50M2,3
70M2,3
100M2
150M
175M5
200M5, 6
250M
320M6
350M6
400M
450M6
1000M7
Metal halide ceramic8
50MHC2, 3
70MHC2, 3
100MHC2
150MHC
Compact fluorescent2
2/26DTT
2/26TRT
2/32TRT
42 TRT
57TRT
70TRT
Induction2
55IL
85IL
Horizontal lamp
R2 Type II roadway
R3 Type III asymmetric
SR2 Type II segmented
SR3 Type III segmented
SR4SC Type IV segmented, FT, sharp cutoff
SR4W Type IV segmented, FT, wide
SR5S Type V segmented, square
Vertical lamp
SYM Symmetric
ASY Asymmetric
VFA Vertical FT, automotive
120
20810
24010
277
347
48010
TB11
23050HZ12
MVOLT13
TVOLT14
(blank) Magnetic ballast
CWI Constant wattage isolated12
SCWA Super CWA ballast
Arm mounting
SP09 9" arm for square pole
RP09 9" arm for round pole
SP12 12" arm for square pole
RP12 12" arm for round pole
WB12 12" arm for wall
Post-top mounting
PT4 Post top, 4" OD open-top pole
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit16
QRS Quartz restrike system16
QRSTD QRS time delay16
DC12 Emergency circuit 12V; 35W lamp included
2DC12 Emergency circuit 12V; two 35W lamps included
DC2012 Emergency circuit 12V; 20W lamp included
2DC2012 Emergency circuit 12V; two 20W lamps included
PE Photoelectric cell - button type17
PER NEMA twist-lock receptacle only18
EA Embossed accents
KW1 KiloWatch 120V control19
KW4 KiloWatch 277V control19
TLS Tool-less access
EHS External house-side shield
EHSB External house-side shield black
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately20
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard21
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For car lots, street lighting or
parking areas.
Construction
Heavy-gauge, die-formed
aluminum housing,
fabricated using robotic con-
tinuous seam-weld process
for weathertight integrity.
Integral structural support
plate for mounting arm
and electrical components.
Hinged aluminium door-
frame with stainless steel
hardware. Thermal, shock-
resistant, tempered flat or
drop glass lens. Continuous
silicone gasketing surrounds
lens for weather tight seal.
Finish: Dark bronze polyester
powder finish standard.
Optional linear embossed
accent reveals are available.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Vertical-lamp reflectors
are one-piece spun and
formed anodized aluminum.
Horizontal-lamp reflectors
also available. Horizontal
position-oriented for types
R2, R3 and R4. Reflectors are
rotatable and interchangable.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All ballasts
are 100% factory tested.
High reactance, high power
factor for 150W and below.
Constant wattage autotrans-
former for 175W and above.
MH: 150W and below are
standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required for
151-450W (must order SCWA
option) for U.S. shipments only.
CSA, NOM or INTL required for
probe start shipments outside
the U.S. Compact fluorescent
uses an electronic high-
frequency ballast.
Socket: Mogul-base porcelain
socket for KVF2 (1000S is 5K
pulse rated), medium base
for KVF1 with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V, 4KV pulse
rated. LPI is standard 35K
for CFL.
Installation
Extruded aluminum arm with
integral splice compartment.
Standard arm is 9" in length.
(12" arm is required for
fixtures mounted at 90°.)
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient
and wet locations. Optical
chamber is IP65 rated for
ingress protection per IEC529
international standards.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVF2 1000M SYMDL 480 SP09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Specify lamp type and distribution. See
Configurations table.
2 Not available with SCWA.
3 Not available 480V.
4 Available with SYMDL, ASYDL and VFADL standard E-25 lamp.
5 Not available KVF1 SCWA with horizontal distributions.
6 Must be ordered with SCWA. 450M only available in vertical distribution.
7 Must use reduced jacket lamp.
8 Not applicable with L/LP.
9 Designate DL (drop lens) or FL (flat lens) after distribution (ie SR2FL). SR4W only available with FL.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120V, 208V, 240V,
277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Consult factory for available wattages.
13 Multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage between 120V and 277V.
14 Tri-volt electronic ballast capable of operat-ing any line voltage between 200V and 277V.
15 Use 12" arm when mounting two luminaires at 90°.
16 Maximum allowable wattage lamp included.
17 Not available 347, 480, or TB. Not available KVF2.
18 Not available KVF1. Photocell not included.
19 Available with 200M-400M SCWA: ASY, SYM or VFA; 250S or 400S: all distributions.
20 May be ordered as an accessory.
21 Prefix with fixture name and size (e.g., KVF1VG).
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONKVF1 55IL, 85IL Not RequiredKVF1 2/26DTT, 2/26TRT, 2/32TRT SYMDL, SYMFL, ASYDL, ASYFL, SR3DL, SR3FLKVF1 57TRT, 70TRT SR2DL, SR3DL, SR4SCDL, SR5SDL
KVF1
42TRT, 50M, 50MHC, 70S, 70M, 70MHC, 100S, 100M,
100MHC, 150S, 150M, 150MHC, 175M
SYMDL, SYMFL, ASYDL, ASYFL, SR2DL, SR2FL, SR3DL, SR3FL, SR4SCDL, SR4SCFL,
SR5SDL, SR5SFL
KVF1 175M SCWA, 200M SYMDL, SYMFL, ASYDL, ASYFL
KVF2250S, 250M, 320M, 350M,
400S, 400M
SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL, R2DL, R2FL, R3FL, R3DL, SR2FL,
SR3FL, SR4SCFL, SR4WFLKVF2 450M SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL
KVF2 1000MSYMDL, SYMFL, ASYDL, ASYFL, VFADL,
VFAFL, R2DL, R2FL, R3FL, R3DLKVF2 1000S ASYDL, SYMDL, VFADL
DH
S
OH
S
A
KVF1 KVF2
EPA ARM: 1.2 ft2 (0.11m2) 2.8 ft2 (0.25 m2) EPA PT: 1.3 ft2 (0.12m2) 2.8 ft2 (0.25 m2) Square: 16-1/8 (40.9) 21-1/2 (54.6)
Flat lens height: 9-3/8 (23.8) 14 (35.6) Drop lens height: 11-3/8 (29.0) 17 (43.2) PT overall height: 18 (45.7) 22-3/4 (57.8)
Weight: 29 lbs (13.2 kg) 55 lbs (24.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
529www.lithonia.com | 1-800-279-8041PSG10
AR
EA LIG
HTIN
G
14(35.6)
21-1/2 (54.6)Arm
KVF POLE COMBOIntended Use
For parking areas, street
lighting, walkways and
car lots.
Construction
Heavy-gauge, die-formed
aluminum housing is
fabricated using robotic con-
tinuous seam-weld process
for weather-tight integrity.
Integral structural support
plate for mounting arm
and electrical components
ensures rigidity and strength.
Hinged aluminum doorframe
incorporates stainless steel
hardware. Continuous
silicone gasketing surrounds
lens for weather-tight seal.
Finish: Standard finish is dark
bronze (DDB).
Optics
Flat lens configurations meet
full-cutoff criteria. Vertical-
lamp reflectors are one-piece
spun and formed anodized
aluminum. Reflectors are
independently designed to
optimize light output for the
lens type.
Electrical
Ballast: All ballasts are 100%
factory tested. Super CWA
Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required; must
order SCWA option.
Socket: Porcelain, vertically
oriented, mogul-base socket
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W,
600V. Lamp included.
Installation
Extruded aluminum arm for
square pole mounting.
Listings
UL Listed (standard). UL
Listed for 25°C ambient and
wet locations. IP65 Rated.
Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast
Series Lamp type Pole height
KV1 1 fixture 250M 25C 25-foot "C" pole
KV2 2 fixtures 320M 30G 30-foot "G" pole
400M
SYMFL Symmetric
ASYFL Asymmetric
5C
5G
09 9 inches
12 12 inches
SCWA Super CWA ballast1
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KV2400M25C ASYFL 5C 09 SCWA
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
KV2400M25C ASYFL 5C 09 SCWA CONSISTS OF:QUANTITY CI CODE DESCRIPTION
1 SSS 25 5C DM28 PL DDB SHAFT2 KVF2 400M ASYFL TB SCWA SP09 LPI1 SBC5 DDB U1 ABSSS-51 STC-5 U
MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KV1 SINGLE KV2 DOUBLE25' 5C 100 9030' 5G 100 90
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Must be specified.
SpecificationPRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com530
SpecificationA
REA
LIG
HTI
NG
KVR
Series Lamp type1 Distribution1, 9 Voltage Ballast Mounting
KVR1
KVR2
High pressure sodium2
70S
100S
150S
250S
400S
1000S3
Metal halide
50M2, 4
70M2, 4
100M2
150M
175M5
200M5, 6
250M
320M6
350M6
400M
450M6
1000M7
Metal halide ceramic8
50MHC2, 4
70MHC2, 4
100MHC2
150MHC
Compact fluorescent2
2/26DTT
2/26TRT2/32TRT
42 TRT
57TRT
70TRT
Induction2
55IL
85IL
Horizontal lamp
R2 Type II roadway
R3 Type III asymmetric
SR2 Type II segmented
SR3 Type III segmented
SR4SC Type IV segmented, FT, sharp cutoff
SR4W Type IV segm, FT, wide10
Vertical lamp
SYM Symmetric
ASY Asymmetric
VFA Vertical FT, automotive10
120
20811
24011
277
347
48011
TB12
23050HZ13
MVOLT14
TVOLT15
(blank) Magnetic ballast
CWI Constant wattage isolated13
SCWA Super CWA ballast
Arm mounting16
SPD09 9" arm for square pole
RPD09 9" arm for round pole
WBD09 9" arm for wall
WWD09 9" arm for wood pole or wall
SPD12 12" arm for square pole
RPD12 12" arm for round pole
Mounting (continued) Options Finish Lamped
WBD12 12" arm for wall
WWD12 12" arm for wood pole or wall
Post-top mounting
PT4 Post top, 4" OD open-top pole
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit17
QRS Quartz restrike system17
QRSTD QRS time delay17
PE Photoelectric cell - button type18
PER NEMA twist-lock receptacle only19
KW1 KiloWatch 120V control relay20
KW4 KiloWatch 277V control relay20
TLS Tool-less access
EHS External house-side shield
EHSB External house-side shield black
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately21
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard22
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For streets, parking lots and
surrounding areas.
Construction
Housing: Cylindrically shaped,
rugged, heavy-gauge, spun alu-
minum housing. Fully gasketed
for weathertight integrity.
Finish: Dark bronze polyester
powder finish standard.
Optional linear embossed
accent reveals are available.
Arm-mounted KVR2 standard
doorframe is natural aluminum
(DNA). Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
KVR vertical-lamp reflectors
are one-piece spun and
formed around anodized alu-
minum. KVR horizontal-lamp
hydroformed and segmented
reflectors also available. KVR
reflectors are rotatable and
interchangeable.
Lens: Impact-resistant, clear,
3/16 " thick, tempered drop
or flat lens.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All ballasts
are 100% factory tested.
High reactance, high power
factor for 150W and below.
Constant wattage autotrans-
former 175W and above.
MH: Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-450W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S. Compact
fluorescent uses an electronic
high-frequency ballast.
High-frequency generator
for induction.
Socket: Mogul-base porcelain
socket for KVR2 (1000S is 5K
pulse rated), medium base
for KVR1 with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V, 4KV pulse rated.
LPI is standard 35K for CFL.
Installation
Mounting: Extruded-alu-
minum contoured arm with
integral splice compartment
for wall or pole mounting is
shipped in fixture carton. Op-
tional mountings available.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient and
wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVR2 250M SYMDL 120 SCWA RPD09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONKVR1 55IL, 85IL Not Required
KVR12/26DTT, 2/26TRT,
2/32TRTSYMDL, SYMFL, ASYDL,
ASYFL, SR3DL, SR3FL
KVR1 57TRT, 70TRTSR2DL, SR3DL, SR4SCDL,
SR5SDL
KVR1
42TRT, 50M, 50MHC, 70S, 70M, 70MHC, 100S,
100M, 100MHC, 150S, 150M, 150MHC, 175M
SYMDL, SYMFL, ASYDL, ASYFL, SR2DL, SR2FL,
SR3DL, SR3FL, SR4SCDL, SR4SCFL, SR5DL, SR5FL
KVR1 175M SCWA, 200MSYMDL, SYMFL, ASYDL,
ASYFL
KVR2175M, 250S, 250M, 320M, 350M, 400S,
400M
SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL,
R2DL, R2FL, R3DL, R3FL, SR2FL, SR3FL, SR4SCFL,
SR4WFL
KVR2 1000M, 1000SSYMDL, SYMFL, ASYDL,
ASYFL
Notes1 Specify lamp type and distribution.
See Configurations table.
2 Not available with SCWA.
3 Drop lens uses standard E25 lamp. Flat lens uses reduced jacket lamp.
4 Not available in 480V.
5 KVR1 175M SCWA and 200M SCWA are only available with ASY or SYM.
6 Must be ordered with SCWA.
7 Must use reduced jacket lamp.
8 Not applicable with L/LP.
9 Designate DL (drop lens) of FL (flat lens) after distribution (e.g., SR2FL).KVR2 with SR2, SR3, SR4SC, SR4W only available with flat lens.
10 Not available with KVR1.
11 Must specify CWI for use in Canada.
12 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
13 Consult factory for available wattages.
14 Multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage between 120V and 277V.
15 Tri-volt electronic ballast (induction only) capable of operating any line voltage between 200V and 277V.
16 Use 12" arm when mounting two luminaires at 90°.
17 Maximum allowable wattage lamp included.
18 Not available 347, 480, or TB. Only available with KVR1.
19 Only available KVR2. Photocell not included.
20 Available with 200M-400M SCWA: SYM, AS or VFA; 250S or 400S: all distributions.
21 May be ordered as an accessory.
22 Prefix with fixture name and size (e.g., KVR1VG).
H
Dia.
H
Dia.
KVR1 KVR2 EPA arm: 1.0 ft2 (0.09 m2) 2.1 ft2 (0.20 m2) EPA PT: 1.2 ft2 (0.11 m2) 2.5 ft2 (0.23 m2) Diameter: 17 (43.1) 26 (66.0)
Flat lens height: 9-1/4 (23.5) 14 (35.6) Drop lens height: 10 (25.4) 17 (43.2) PT overall height: 18- 3/4 (47.6) 23-1/2 (59.7)
Weight: 35 lbs (15.9 kg) 56 lbs (25 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
531www.lithonia.com | 1-800-279-8041PSG10
Specification AR
EA LIG
HTIN
G
KAR
Series Lamp type1 Distribution1 Voltage Ballast Mounting10,11
KAR1
KAR2
KAR3
High pressure sodium2
150S
250S
400S
1000S
Metal halide
100M2
150M
175M3
200M4
250M
320M4
350M4
400M
1000M
Metal halide ceramic5
100MHC2
150MHC
R2 Type II roadway
R3 Type III asymmetric6
R4 Type IV, FT6
R5S Type V symmetric square
120
2087
2407
277
347
4807
TB8
23050HZ9
(blank) Magnetic ballast
CWI Constant wattage isolated9
SCWA Super CWA ballast
Ships separately12
SPD09 9" contoured arm for square pole
RPD09 9" contoured arm for round pole
WBD09 9" contoured arm for wall
SPD12 12" contoured arm for square pole
RPD12 12" contoured arm for round pole
WBD12 12" contoured arm for wall
DAD12P 12" contoured degree arm for pole
DAD12WB 12" contoured degree arm for wall
KTMB Twin mounting bar
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit13
QRS Quartz restrike system13
QRSTD QRS time delay13
PER NEMA twist-lock receptacle only14
HS House-side shield
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately10
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard15
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For parking lots, plazas
or entrances.
Construction
Housing: Rugged, heavy-
gauge, spun-aluminum hous-
ing in centriform shape.
Doorframe: Aluminum door
frame standard with 1/8 "
impact-resistant, tempered-
glass lens. Stainless steel ex-
ternal hardware. One-piece
EPT closed-cell gasket.
Finish: Dark bronze polyes-
ter powder finish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Anodized, hydroformed alu-
minum reflectors. Four cutoff
distributions available: R2
(roadway), R3 (asymmetric),
R4 (forward throw) and R5S
(symmetric). R4 reflector is
field-rotatable. Reflectors
hinge out for easy installa-
tion and maintenance.
Electrical
All ballasts are 100% factory
tested. High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Horizontally ori-
ented mogul-base porcelain
socket (100M and 150M are
medium-base) with copper
alloy, nickel-plated screw
shell and center contact. UL
Listed 1500W-600V. 4KV
pulse rated. (1000S is 5KV
pulse rated.)
Installation
Mounting: Contoured,
extruded-aluminum 9"
(KAR1/KAR2) and 12" (KAR3)
arms with integral splice
compartment for pole or wall
mounting. Optional mount-
ings available.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KAR3 1000S R4 TB RPD12 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KAR1100M, 100MHC, 150S, 150M, 150MHC, 175M, 200M, 250M
R2, R3
KAR2 250S, 320M, 350M, 400S, 400M R2, R3, R4, R5SKAR3 1000S, 1000M R3, R4, R5S
Dia.Arm
H
KAR1 KAR2 KAR3 EPA6: 1.2ft2 (.11m2) 1.5ft2 (.14m2) 2.2ft2 (.20m2) Diameter: 19-1/2 (49.5) 21-1/2 (54.6) 30 (75.6) Height: 9-1/2 (24.1) 11 (27.9) 12-1/2 (31.8) Arm length: 9 (22.9) 9 (22.9) 12 (30.5)Max. weight: 36 lbs (15 kg) 45 lbs (20 kg) 53 lbs (24 kg)
Notes1 Specify lamp type and distribution.
See Configurations table.
2 Not available with SCWA.
3 Universal, mogul base lamp allows KAR1 and KAR2 to be available with SCWA.
4 Must be ordered with SCWA.
5 Not applicable with L/LP.
6 HS option available.
7 Must specify CWI for us in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Consult factory for available wattages.
10 May be ordered as accessory.
11 Must specify finish.
12 KAR1, KAR2 uses 9" arm, KAR3 uses 12" arm when mounting two luminaries at 90°.
13 Maximum allowable wattage lamp included.
14 Photocell not included.
15 Prefix with fixture name and size (e.g., KAR1VG). Not available with KAR3.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com532
AR
EA L
IGH
TIN
GSpecification
Series Lamp type1 Distribution1 Voltage Ballast Mounting
KVS1
KVS3
High pressure sodium2
70S
100S
150S
250S
400S
1000S
Metal halide
100M2
150M
175M3
200M4
250M
320M4
350M4
400M
1000M5
Metal halide ceramic6
100MHC2
150MHC
R2 Type II roadway
R3 Type III asymmetric
R4 Type IV, FT
R5 Type V symmetric
120
2087
2407
277
347
4807
TB8
23050HZ9
(blank) Magnetic ballast
CWI Constant wattage isolated9
SCWA Super CWA ballast
Ships separately
SP09 9" arm for square pole
RP09 9" arm for round pole
WB09 9" arm for wall
WW09 9" arm for wood pole or wall
SP12 12" arm for square pole
RP12 12" arm for round pole
WB12 12" arm for wall
WW12 12" arm for wood pole or wall
Optional mounting (ships installed)
MA Internal mast arm adaptor10
Optional mounting (ships separately)
KMA External mast arm adaptor11, 12
DA12P 12" degree arm for pole
DA12WB 12" degree arm for wall
KTMB Twin mounting bar11
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit13
QRS Quartz restrike system13
PER NEMA twist-lock receptacle only14
MED Medium-base socket11
HS House-side shield15
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately16
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard17
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
KVSIntended Use
For lighting shopping center
or stadium parking lots.
Construction
Housing: Rugged, heavy-
gauge aluminum housing.
Square shape, continuously
welded seams for weather-
tight integrity. EPDM closed-
cell housing gasket.
Doorframe: Extruded
aluminum hinged door
frame. All exposed hardware
is stainless steel.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
One-piece, anodized, hydro-
formed aluminum reflector.
Four cutoff distributions
available: R2 (roadway), R3
(asymmetric), R4 (forward
throw) and R5 (symmetric).
Reflectors hinge out for easy
removal during installation/
maintenance. Reflectors not
rotatable. R5 is vertically
lamped; R2, R3, and R4 are
horizontally lamped.
Lens: Impact-resistant flat
glass is standard for KVS1, R2,
R3 and R4. Convex glass lens
is standard with all KVS3 and
KVS1 R5.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All bal-
lasts are 100% factory
tested. High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Mogul-base porcelain
socket (100M and 150M are
medium-base) with copper
alloy, nickel-plated screw
shell and center contact. UL
Listed 1500W-600V. 4KV
pulse rated. (1000S is 5KV
pulse rated.)
Installation
Mounting: Extruded 9"
(KVS1) and 12" (KVS3)
arms with integral splice
compartment for wall or pole
mounting. Optional mount-
ing available.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVS1 250S R3 TB SP09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Specify lamp type and distribution. See
Configurations table.
2 Not available with SCWA.
3 Universal mogul base lamp allows KVS to be available with SCWA.
4 Must be ordered with SCWA.
5 Must use BT37 reduced jacket lamp for 1000M, R2 and R3; R5 uses BT56 standard lamp.
6 Not applicable with L/LP.
7 Must specify CWI for use in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Consult factory for available wattages.
10 KVS3 only. Single/twin, 180° configura-tion.
11 KVS1 only.
12 For use with 6" minimum 2-3/8" OD pipe.
13 Maximum allowable wattage lamp included.
14 Photocell not included.
15 Not available R2.
16 May be ordered as accessory.
17 KVS1 only. Not available with R5. (To order as an accessory: KVS1VG)
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KVS170S, 100S, 100M, 100MHC, 150S,
150M, 150MHC, 175M, 250S, 250MR2, R3, R4, R5
KVS3 320M, 350M, 400S, 400M, 1000M R2, R3, R5KVS3 1000S R5
Arm Square
H
KVS1 KVS3 EPA8: 1.8 ft2 (.17 m2) 3.9 ft2 (.36 m2) Sqaure: 16-3/4 (42.0) 24 (61.0) Height: 10-1/2 (26.0) 16-1/2 (42.0)Max. weight: 33 lbs (15.0 kg) 74 lbs (34.0 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
533www.lithonia.com | 1-800-279-8041PSG10
LITHO
NIA
OU
TDO
OR
General Purpose
SeriesLamp type Voltage Ballast Mounting Options Finish Lamped
KT1 Low pressure sodium
55L
90L
2/90L
120
2081
2401
277
4801,2
(blank) Magnetic ballast
Ships separately
SP04 4" square pole arm
SP06 6" square pole arm3
RP04 4" round pole arm
RP06 6" round pole arm3
WB04 4" wall bracket
WB06 6" wall bracket
KMA Mast arm adapter
KTMB Twin mounting bar
Ships installed
PER NEMA twist-lock receptacle only4
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
CSA Meets Canadian standards
Ships separately5
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Corrosion-resistant finish
LPI Lamp included
LPIC Lamp included (deluxe/coated)
L/LP Less lamp
KT1Intended Use
For parking lots, walkways,
building facades, indus-
trial sites and entrances.
Designated for intrinsically
dark areas, such as those
surrounding observatories
and sea turtle habitats.
Construction
Housing: Heavy-gauge alu-
minum housing, rectilinear
shape, continuously welded
seams for weather-tight in-
tegrity. Dark bronze polyester
powder finish (DDB) standard;
additional architectural
colors available; see
www.lithonia.com/archcolors.
Doorframe: Natural, anod-
ized, extruded aluminum
frame with mitered corners,
retained with two hinge pins
and secure with one, quarter-
turn quick-release fastener.
Integrally designed, extruded
silicone gasket provides
weather-proof seal between
housing and frame.
Optics
Lens: Clear glass lens standard.
Electrical
High-reactance autotrans-
former, 100% factory tested
standard.
Listings
UL Listed (standard). CSA
Certified (see Options).
Suitable for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KT1 90L 120 SP04 PER LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
8-1/4(21.0)
29-3/4(75.6)
15-3/4(40.0)
EPA: 2.3 ft2 (0.21m2) (includes arm) Weight: 42 lbs (19 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Consult factory for availability in Canada.
2 Reactor ballast.
3 SP06 or RP06, must be used when two or more luminaires are oriented on a 90° drilling pattern.
4 Photocell not included.
5 May be ordered as accessory.
AR
EA LIG
HTIN
GPRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com534
PRODUCT INFORMATION General PurposeA
REA
LIG
HTI
NG
Series Lamp type Distribution Voltage Ballast Mounting11
KAC
KAD
KADT
High pressure sodium1
70S
100S
150S
250S
400S
Metal halide
70M1, 2
100M1
150M
175M3
200M4
250M
320M4
350M4
400M5
Metal halide ceramic6
70MHC1, 2
100MHC1
150MHC
KAD/KADT
R2 Type II roadway7
R3 Type III asymmetric7
R4 Type IV, FT7
R5S Type V symmetric square
SR2 Type II segmented7
SR3 Type III segmented7
SR4SC Type IV segmented, FT, sharp cutoff
KAC - Lens
FP Flat C73T
DPA Drop acrylic
DPP Drop polycarbonate
120
2088
2408
277
347
4808
TB9
23050HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated10
SCWA Super CWA ballast
Ships included
SPD04 4" contoured arm for square pole
RPD04 4" contoured arm for round pole
WBD04 4" contoured arm for wall
SPD09 9" contoured arm for square pole
RPD09 9" contoured arm for round pole
WBD09 9" contoured arm for wall
Ships separately12, 13
KMA External mast arm adaptor
DAD12P 12" contoured degree arm for pole
DAD12WB 12" contoured degree arm for wall
KTMB Twin mounting bar
KADWBA Decorative wall bracket (up or down)
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit14
QRS Quartz restrike system14
QRSTD QRS time delay14
PER NEMA twist-lock receptacle only15
PD Power tray16
WTB Terminal block16
HS House-side shield
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately17
PE1 NEMA twist-lock PE (120V-240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
VG Vandal guard18
WG Wire guard18
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For parking areas, street
lighting, walkways and
car lots.
Construction
Housing: Rugged, die-cast,
soft-corner aluminum hous-
ing with 0.12" nominal wall
thickness.
Doorframe: KAD die-cast
doorframe has impact-re-
sistant, tempered glass lens
that is fully gasketed with
one-piece tubular silicone.
KAC die-cast aluminum
doorframe has prismatic,
impact-resistant, tempered
glass, drop dish acrylic lens or
drop dish polycarbonate lens.
Door frame is fully gasketed
with one-piece silicone.
Finish: Dark bronze
polyester powder finish.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
KAD: anodized aluminum
hydro-formed or segmented
reflectors. Four full cutoff
distributions available: R2
(roadway), R3 (asymmetric),
R4 (forward throw) and
R5 (symmetric). High-
performance, segmented
reflectors are rotatable and
field-interchangable. KAC
reflector is optical-quality
aluminum that works in
tandem with a light-diffusing
prismatic lens.
Electrical
All ballasts are 100% factory
tested. High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for US
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the US.
Socket: Porcelain, horizon-
tally oriented medium-base
socket for 70-150W and
mogul-base socket for 175W
and above with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V. 4KV pulse rated.
Installation
Extruded aluminum arm for
square pole mounting. KADT
mounts with SPDO4 with
an additional backing plate
and receiver used to mount
suspend tension rod. KADT
mounts 11.27" lower than
specified pole height.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). KAD UL Listed
for 25°C ambient and wet
locations. IP65 Rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KAD 400M R3 TB SCWA SPD09 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Not available with SCWA.
2 Not available with 480V.
3 Universal mogul base lamp allows KAD, KADT and KAC to be available with SCWA.
4 Must be ordered with SCWA.
5 Reduced jacket ED28 required for SR2, SR3, & SR4SC optics.
6 Not applicable with L/LP.
7 HS Option available
8 Must specify CWI for us in Canada.
9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V.
10 Consult factory for available wattages.
11 9" arm required when two or more luminaries are oriented @90°. KADT only available with SPDO4 and only available at 180° orientations.
12 May be ordered as accessory. Not available with KADT.
13 Must specify finish.
14 Maximum allowable wattage lamp included.
15 Photocell not included.
16 Only available with SR2, SR3, & SR4SC optics.
17 May be ordered as accessory.
18 Prefix with fixture name and size (e.g., KADWG).
17-1/2(44.5)
7-1/8(18.1) 11-1/8
(28.3)
KAD/KAC (flat) KAC (drop) EPA: 1.2 ft2 (0.11 m2) 1.4 ft2 (0.13 m2)
Max. weight: 35.9 lbs (16.3 kg) 34 lbs (15.4 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
17-1/2 (44.5)
7-1/8(18.1)
KADT EPA: 1.2 ft2 (0.11 m2) Max. weight: 35.9 lbs (16.3 kg)
KAD KAC KADTContour®
LITHO
NIA
OU
TDO
OR
535www.lithonia.com | 1-800-279-8041PSG10
PRODUCT INFORMATION General Purpose AR
EA LIG
HTIN
G
KAD POLE COMBO
Contour®
Intended Use
For parking areas, street
lighting, walkways and
car lots.
Construction
Housing: Rugged, die-cast,
soft-corner aluminum hous-
ing with 0.12" nominal wall
thickness.
Doorframe: KAD die-cast
doorframe has impact-re-
sistant, tempered glass lens
that is fully gasketed with
one-piece tubular silicone.
Finish: Dark bronze polyester
powder finish.
Optics
Anodized aluminum
hydroformed reflectors.
IES cutoff distributions: R3
(asymmetric) or R4 (forward
throw). Optional houseside
shield (HS) available.
Electrical
Ballast: All ballasts are 100%
factory tested. Super CWA
Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required; must
order SCWA option.
Socket: Porcelain, horizon-
tally oriented mogul-base
socket with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W, 600V. Lamp included.
Installation
Extruded aluminum
contoured arm for square
pole mounting.
Listings
UL Listed (standard). UL
Listed for 25°C ambient and
wet locations. IP65 Rated.
Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast Options
Series Lamp type Pole height
KC1 1 fixture 250M 16C 16-foot "C" pole
KC2 2 fixtures 400M 20C 20-foot "C" pole
25C 25-foot "C" pole
R3 Type III asymmetric
R4 Type IV, FT
4C (blank) 4 inches
09 9 inches1
SCWA Super CWA ballast HS House-side shield2
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KC2400M25C R3 4C SCWA
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
KC2400M25C R3 4C SCWA CONSISTS OF:QUANTITY CI CODE DESCRIPTION
1 SSS 25 4C DM28 PL DDB SHAFT2 KAD 400M R3 TB SCWA SPD04 LPI1 SBC4 DDB U1 ABSSS-4C1 STC-4 U
MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KC1 SINGLE KC2 DOUBLE
16' 4C 4" or 9" arm 100 10020' 4C 4" or 9" arm 100 100
25' 4C 4" arm 90 9025' 4C 9"arm 90 80
17-1/2(44.5)
7-1/8(18.1)
KAD EPA: 1.2 ft2 (0.11 m2) Max. weight: 35.9 lbs (16.3 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 9" arm available only with 400M.
2 Ships separately.
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com536
AR
EA L
IGH
TIN
GContractor Select Stock
SECURITY LIGHTING
Intended Use
Arm-mounted security light
for yards and lots, service roads
and building perimeters.
Construction
Housing: Rugged, die-cast alu-
minum head with photocell.
Optics
Formed aluminum reflectors
and open bottom refractor for
ease of maintenance and lamp
replacement. Prismatic refrac-
tor provides uniform symmetri-
cal Type V distribution.
Installation
Mounting arm (24" or 18"
with TDD65) and all mount-
ing hardware is included in
carton. Photocell and lamp
are included in carton. 120V.
Listings
Listed and labeled to UL
standards for wet locations.
Listed and labeled to CSA
standards. Fixtures are
covered by Lithonia Light-
ing 12-month warranty
against mechanical defects
in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGEMOUNTING ARM
LENGTHLAMP INCLUDED
APPROXIMATE WEIGHT (LBS)
STANDARD CARTON QUANTITY
TDD 100ML 120 M2 12" security light 100 MH 120 24" Y 12 2TDD 100SL 120 M2 12" security light 100 HPS 120 24" Y 12 2TDD 150SL 120 M2 12" security light 150 HPS 120 24" Y 12 2
TDD 65L 120 M2 10" security light 65 Fluorescent 120 18" Y 4 2
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
12(30.5)
17(43.2)
TDD HID
10-3/4(27.3)
16(40.6)
TDD Fluorescent
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
PRODUCT INFORMATIONPRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
537www.lithonia.com | 1-800-279-8041PSG10
BO
LLAR
DS
Architectural
Series Lamp type Distribution Voltage Ballast
ASBX
ASBY
ASBZ
High pressure sodium
50S
70S
100S
150S
Metal halide1
70M
100M
Incandescent
I2
Standard flared cone
R5 Type V distribution
Optional cylindrical reflector
CYA Specular alzak
CYB Black alzak
CYG Gold alzak
CYF Flat black
120
2083
2403
277
347
TB4
(blank) Magnetic ballast
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet
FG Festoon outlet with duplex ground fault receptacle5
CSA Meets Canadian standards
Ships separately6
S8S Half-shield (8" square)
KBAB Anchor bolts
(blank) Textured dark bronze (std.)
DBL Black
DNA Natural aluminum
CR Enhanced corrosion resistance
DSST Textured sandstone
DNAT Textured natural aluminum
DWHG Textured white
DBLB Textured black
LPI Lamp included
L/LP Less lamp
ASBAeris™
Intended Use
For walkways, plazas or
pedestrian areas.
Construction
Housing: Bottom housing is
0.188" extruded aluminum.
Decorative Aeris™ top cover is
sand-cast with 0.188"mini-
mum wall thickness. 42"
overall height standard.
Flush-fitting lens is 1/4",
clear, 100% virgin acrylic.
Exposed hardware is tamper-
resistant stainless steel.
Four 1/4" x 11" anchor bolts
with double nuts/washers
and 4-1/2" diameter bolt
circle template provided for
mounting (shipped sepa-
rately). Dark bronze textured
(DDBT) corrosion-resistant
polyester powder finish stan-
dard. Additional architectural
colors available, see
www.lithonia.com/archcolors.
Optics
Reflector system incorporates
an anodized, spun aluminum
flared cone and an anodized,
hydroformed, fluted upper
reflector providing a Type V
(symmetric) cutoff distribu-
tion. Optional cylindrical
lower reflector available.
Electrical
Electrical components are
unitized on removable
power module and accessible
through bottom of bollard.
Positive-locking, quick-
disconnect on secondary
circuit. Ballast: All ballasts
are 100% factory tested. High
reactance, high power factor.
Socket: Porcelain, medium-
base socket, 4KV pulse rated.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASBX 70M R5 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
42*(106.7)
8(20.3)
8(20.3)
8(20.3)
42*(106.7)
42*(106.7)
Max. weight: 43.2 lbs (19.6 kg)
* Also available in 24” (H24), 30” (H30) and 36” (H36).
ASBX ASBY ASBZ
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Requires coated lamp.
2 120V only. 150W max.; lamp not provided.
3 Consult factory for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Cover ships separately.
6 May be ordered as accessory.
Standardflared cone
Optionalcylindrical reflector
ASBX ASBY ASBZ
PRODUCT INFORMATIONPRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com538
ArchitecturalB
OLL
AR
DS
Series Lamp type Distribution Voltage Ballast
MRBX High pressure sodium
35S1
50S
70S
100S
Metal halide2
50M
70M
100M
Incandescent3
I
Compact fluorescent
13DTT
26TRT
32TRT
SYM Type V symmetric distribution
ASY Asymmetric distribution
120
2084
2404
277
3475
TB6
MVOLT7
(blank) Magnetic ballast
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
GLR Internal fast-blow fusing
GMF Internal slow-blow fusing
H24 24" overall height
H30 30" overall height
H36 36" overall height
ELDWC Cold weather emergency battery pack (-20° C start temp)8
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
Ships separately9
HS Internal half shield10
MRAB Anchor bolts
(blank) Textured dark bronze (std.)
DDBT Textured dark bronze
DSST Textured sandstone
DNAT Textured natural aluminum
DWHG Textured white
DBLB Textured black
LPI Lamp included
L/LP Less lamp
Intended Use
For walkways, plazas or
pedestrian areas.
Construction
Extruded one-piece alumi-
num, 0.156" wall thickness.
Molded top cover, 0.156" wall
thickness. 42" overall height
standard. 8" nominal diam-
eter tube standard. Three 1/2"
x 11" anchor bolts with double
nuts and washers (shipped
separately). 3-3/4" bolt circle
template included.
Standard finish is textured
dark bronze (DDBT) polyester
powder, electrostatically
applied and oven-cured.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Two reflector options are
available: Type V symmetric
and asymmetric distribution.
Asymmetric reflector is
adjustable independent of
bollard orientation and can
be adjusted without remov-
ing top cover. Lens is clear,
seamless 100% virgin acrylic,
1/4" wall, flush fitting.
Coated lamp is standard.
Electrical
Electrical components are
unitized on removable
power module and acces-
sible through top of bollard.
Positive-locking, quick-
disconnect on secondary
circuit. Ballast: All ballasts
are 100% factory tested.
High reactance, high power
factor for 100W and below.
MH: 100W and below are
standard with pulse-start
ignitor technology. Compact
fluorescent electronic high-
frequency multi-volt ballast,
starting temperature 0° F
(-18° C), <10% THD.
Socket: Vertically oriented,
medium-base, pulse-rated
porcelain socket with copper
alloy, nickel-plated shell and
center contact. Compact
fluorescent has four-pin,
white thermoplastic body
with quick-connect push-in
wiring terminals. LPI is
standard 35K for CFL.
Listings
Listed and labeled to UL
standards for wet locations.
Listed and labeled to CSA
standards for wet locations
(see Options.) NOM Certified
(see Options).
U.S. Patent No. D550,881.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: MRBX 70M ASY 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
8(20.3)
42*(106.7)
Max. weight: 45 lbs (20.4 kg)
* Also available in 24” (H24), 30” (H30) and 36” (H36)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 120V only.
2 Requires coated lamp.
3 120V only. 100W max. A19 lamps only.
4 Consult factory for use in Canada.
5 347V not available in 50S.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
7 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating any line voltage from 120-277V.
8 Must specify voltage. 120V or 277V only.
9 May be ordered as an accessory.
10 Ships as: MRBX HS U
MRBX Omero™
PRODUCT INFORMATIONPRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
539www.lithonia.com | 1-800-279-8041PSG10
BO
LLAR
DS
Specification
Notes1 Specify lamp type and distribution. See Configurations table.
2 120V only.
3 Requires coated lamp.
4 KB-6: 116W/TS, lamp not included.
5 KB-8: 150W max., lamp not included.
6 Louver must be used. Multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.
7 Consult factory for use in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Cover ships separately.
10 Choose primary fixture finish and stripe color if desired.
Series Lamp type1 Distribution1 Voltage Ballast Options
KBA6
KBA8
KBD6
KBD8
High pressure sodium
35S2
50S
70S
100S
150S
Metal halide3
50M
70M
100M
Incandescent2, 4, 5
I
Compact fluorescent6
26TRT
32TRT
Standard flared cone
R5 Type V distribution
Optional cylindrical reflector
CYA Specular alzak
CYB Black alzak
CYG Gold alzak
Louvers (8" only)
LV Louvers
120
2087
2407
277
347
TB8
MVOLT6
(blank) Magnetic ballast Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet
FG Festoon outlet with duplex ground fault receptacle9
CSA Meets Canadian standards
Ships separately
R6S Half-shield (6" round)
R8S Half-shield (8" round)
KBAB Anchor bolts
Finish10 Lamped
(blank) Dark bronze (std.)
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
CR Enhanced corrosion resistance
SDDB Dark bronze stripe
SDWH White stripe
SDBL Black stripe
SDNA Natural aluminum stripe
SDTG Tennis green stripe
SDBR Bright red stripe
SDBUA Dark blue stripe
SDYLB Yellow stripe
LPI Lamp included
L/LP Less lamp
KBA KBD
Intended Use
For walkways, plazas or
pedestrian areas.
Construction
Housing: KB_6: Bottom
housing is 0.125" extruded
aluminum. Top cover is
0.156" cast aluminum. KB_8:
Bottom housing is 0.156"
extruded aluminum. 42"
overall height standard on
KBD and KBA6. 43" overall
height standard on KBA8.
Flush-fitting lens is 1/4 ",
clear, 100% virgin acrylic. All
exposed hardware is tamper-
resistant stainless steel. Four
1/2" x 11" anchor bolts with
double nuts/washers and 4-
1/2" diameter bolt circle tem-
plate provided for mounting
(shipped separately).
Finish: Dark bronze (DDB)
corrosion-resistant polyester
powder f inish standard.
Additional architectural
colors available, see
www.lithonia.com/archcolors.
Optics
Reflector system incorporates
an anodized, spun aluminum,
flared cone and an anodized,
hydroformed, fluted upper
reflector providing a Type V
(symmetric) cutoff distribu-
tion. Optional cylindrical
lower reflector or cast alumi-
num louvers available.
Electrical
Electrical components are
unitized on removable
power module and accessible
through bottom of bollard.
Positive-locking, quick-
disconnect on secondary
circuit. Ballast: All ballasts
are 100% factory tested. High
reactance, high power factor
for 150W and below. Compact
fluorescent uses an electronic
high-frequency ballast.
Socket: Medium-base porce-
lain socket, 4KV pulse rated.
Compact fluorescent has
four-pin, white thermoplastic
body with quick-connect
push-in wiring terminals. LPI
is standard 35K for CFL.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBA8 70M R5 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KBA6, KBD6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBA8, KBD8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF, LVKBA8, KBD8 26TRT, 32TRT LV
42*(106.7)
42*(106.7)
KBD6 KBD8-LVKBA6 KBA8-LV
* Also available in 24" (H24), 30" (H30) and 36" (H36).
6(15.2)
8(20.3)
6(15.2)
8(20.3)
Max. weight: 34.9 lbs (15.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Standardflared cone
Optionalcylindrical reflector
Louver
KBD KBA
PRODUCT INFORMATIONPRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com540
SpecificationB
OLL
AR
DS
Series Lamp type1 Distribution1 Voltage Ballast Options
KBC6
KBC8
KBR6
KBR8
High pressure sodium
35S2
50S
70S
100S
150S
Metal halide3
50M
70M
100M
Incandescent
I2, 4, 5
Compact fluorescent6
26TRT
32TRT
Standard flared cone
R5 Type V distribution
Optional cylindrical reflector
CYA Specular alzak
CYB Black alzak
CYG Gold alzak
CYF Flat black
Louvers (8" only)
LV Louvers
120
2087
2407
277
347
TB8
MVOLT6
(blank) Magnetic ballast
Installed
DF Double fuse, 208V, 240V
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet9
FG Festoon outlet with duplex ground fault receptacle9
CSA Meets Canadian Standards
Options (continued) Finish10 Lamped
Shipped separately
R6S Half-shield (6" round)
R8S Half-shield (8" round)
(blank) Dark bronze (std.)
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
CR Enhanced corrosion resistance
SDDB Dark bronze stripe
SDWH White stripe
SDBL Black stripe
SDNA Natural aluminum stripe
SDTG Tennis green stripe
SDBR Bright red stripe
SDBUA Dark blue stripe
SDYLB Yellow stripe
LPI Lamp included
L/LP Less lamp
Intended Use
For walkways, plazas or
pedestrian areas.
Construction
Housing: KB_6: Bottom
housing is 0.125" extruded
aluminum. Top cover is
0.156" cast aluminum. KB_8:
Bottom housing is 0.156" ex-
truded aluminum. 42" overall
height standard. Flush-fitting
lens is 1/2", clear, 100%
virgin acrylic. All exposed
hardware is tamper-resistant
stainless steel. Four 1/2" x
11" anchor bolts with double
nuts/washers and 4-1/2"
diameter bolt circle template
provided for mounting
(shipped separately).
Finish: Standard finish is dark
bronze polyester powder fin-
ish. Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Reflector system incorporates
an anodized, spun aluminum,
flared cone and an anodized,
hydroformed, fluted upper
reflector providing a Type V
(symmetric) cutoff distribu-
tion. Optional cylindrical lower
reflector or cast-aluminum
louvers are available.
Electrical
All ballasts are 100% factory
tested. Electrical components
unitized on removable
power module and accessible
through bottom of bollard.
Positive-locking, quick-dis-
connect on secondary circuit.
Compact fluorescent uses an
electronic high-frequency
multi-volt ballast.
Socket: Medium-base porce-
lain socket, 4KV pulse rated.
Compact fluorescent has
four-pin, white thermoplastic
body with quick-connect
push-in wiring terminals. LPI
is standard 35K for CFL.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBR8 100M R5 120 CR LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KBC6, KBR6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBC8, KBR8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF, LVKBC8, KBR8 26TRT, 32TRT LV
Notes1 Specify lamp type and distribution. See Configurations table.
2 120V only.
3 Use coated lamp.
4 KB-6: 116W/TS, lamp not included.
5 KB-8: 150W max., lamp not included.
6 Louver must be used. Multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.
7 Consult factory for use in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Cover ships separately.
10 Choose primary fixture finish and stripe color if desired.
KBR6 KBR8-LVKBC6 KBC8-LV
42*(106.7)
42*(106.7)
* Also available in 24" (H24), 30" (H30) and 36" (H36).
6(15.2)
8(20.3)
6(15.2)
8(20.3)
Max. weight: 34.9 lbs (15.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Standardflared cone
Optionalcylindrical reflector
Louver
KBC KBR
KBCKBR
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
541www.lithonia.com | 1-800-279-8041PSG10
BO
LLAR
DS
Specification
Series Lamp type1 Distribution1 Voltage Ballast Options
KBS6
KBS8
KBE6
KBE8
High pressure sodium
35S2
50S
70S
100S
150S
Metal halide3
50M
70M
100M
Incandescent
I2, 4, 5
Standard flared cone
R5 Type V distribution
Optional cylindrical reflector
CYA Specular alzak
CYB Black alzak
CYG Gold alzak
CYF Flat black
120
2086
2406
277
347
TB7
(blank) Magnetic ballast
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
H24 24" overall height
H30 30" overall height
H36 36" overall height
FD Festoon outlet
FG Festoon outlet with duplex ground fault receptacle8
CSA Meets Canadian standards
Ships separately
S6S Half-shield (6" square)
S8S Half-shield (8" square)
KBAB Anchor bolts
Finish9 Lamped
(blank) Dark bronze (std.)
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
CR Enhanced corrosion resistance
SDDB Dark bronze stripe
SDWH White stripe
SDBL Black stripe
SDNA Natural aluminum stripe
SDTG Tennis green stripe
SDBR Bright red stripe
SDBUA Dark blue stripe
SDYLB Yellow stripe
LPI Lamp included
L/LP Less lamp
KBS KBE
Intended Use
For walkways, plazas or
pedestrian areas.
Construction
Housing: Bottom housing is
0.188" extruded aluminum.
Top cover is a weldment of
0.188" aluminum extrusion
and 0.250" aluminum plate.
42" overall height standard.
Flush-fitting lens is 1/4",
clear, 100% virgin acrylic.
Exposed hardware is tamper-
resistant stainless steel. Four
1/2" x 11" anchor bolts with
double nuts/washers and 4-
1/2" diameter bolt circle tem-
plate provided for mounting
(shipped separately).
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Reflector system incorporates
an anodized, spun aluminum
flared cone and an anodized,
hydroformed, fluted upper
reflector providing a Type
V (symmetric) distribution.
Optional cylindrical lower
reflector available.
Electrical
Ballasts are 100% factory
tested. Electrical components
are unitized on removable
power module and accessible
through bottom of bollard.
Positive-locking, quick-
disconnect on secondary cir-
cuit. Medium-base porcelain
socket, 4KV pulse rated.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBS6 70M R5 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KBE6, KBS6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBE8, KBS8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF
Notes1 Specify lamp type and distribution. See
Configurations table.
2 120V only.
3 Requires coated lamp.
4 KB-6: 116W/TS, lamp not included.
5 KB-8: 150W max., lamp not included.
6 Consult factory for use in Canada.
7 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
8 Cover ships separately.
9 Choose primary fixture finish and stripe color if desired.
KBE6 KBE8KBS6 KBS8
* Also available in 24" (H24), 30" (H30) and 36" (H36).Max. weight: 43.2 lbs (19.6 kg)
42*(106.7)
42*(106.7)
6(15.2)
8(20.3)
6(15.2)
8(20.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
KBS KBE
Standardflared cone
Optionalcylindrical reflector
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com542
ArchitecturalW
ALL
MO
UN
TED
Series Lamp type1 Distribution1 Voltage Ballast Mounting Options
ASW1
ASW2
High pressure sodium2
70S
100S
150S
200S
250S
400S
Metal halide
70M2, 3
100M2
150M
175M4
200M5
250M
320M5
350M5
400M
Metal halide ceramic6
70MHC2, 3
100MHC2
150MHC
Compact Fluorescent2
2/26DTT7
32TRT
2/32TRT7
42TRT
2/42TRT7
57TRT
70TRT
Induction2
70IL
SR2 Segmented type II, roadway8
SR3 Segmented type III, asymmetric8
SR4SC Segmented type IV, FT, sharp cutoff
SR4W Segmented type IV wide, FT (ASW2 only)8
GZ Wall grazing9, 10
SP Spot10, 11, 12
120
20813
24013
277
347
48013
TB14
MVOLT15
23050HZ16
(blank) Magnetic ballast
CWI Constant wattage isolated16
SCWA Super CWA ballast
Ships installed
(blank) Mounting plate (std.)
Ships separately17, 18, 19
BBW Surface-mounted back box
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
ELDW Bodine emergency battery pack20
ELDWR Fixture wired ready for Bodine B30 battery pack21
ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack21, 22
EC Emergency circuit11, 23
Options (continued) Finish Lamped
QRS Quartz restrike system11, 23
QRSTD QRS time delay (ASW2 only)11, 23
DC12 Emergency circuit 12V; 35W lamp included9, 11
2DC12 Emergency circuit 12V; two 35W lamps included9, 11
DC2012 Emergency circuit 12V; 20W lamp included9, 11
2DC2012 Emergency circuit 12V; two 20W lamps included9, 11
PE Photoelectric cell - button type24
HS House-side shield25
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately17, 19
VG Vandal guard
WG Wire guard
(blank) Dark bronze, textured (std.)
DSST Sandstone-textured
DNAT Natural aluminum-textured
DWHG White-textured
DBLB Black-textured
DDB Dark bronze
DNA Natural aluminum
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
ASWAeris™
Intended UseFor building- and wall-mounted applications.
ConstructionHousing: Rugged, die-cast, single-piece aluminum hous-ing. Die-cast door frame has impact-resistant, tempered glass lens. Door frame is fully sealed with a closed cell silicone gasket. Standard finish is textured dark bronze (DDBT) polyester powder. Additional architectural colors are available; see www.lithonia.com/archcolors.
OpticsHigh-performance, segmented reflectors provide superior uniformity and
control. Specialty anodized aluminum spot and grazer optics also are available. Re-flectors are interchangeable and have field degree aiming capability up to 10° without tools. Reflectors allow for tool-less access to electrical components. All optics meet IES full cutoff criteria in lens-down orientation.
ElectricalBallast: All ballasts are 100% factory tested. HPS: High reactance, high power factor for 150W and below. Constant wattage autotransformer 175W and above. MH: 150W and below are standard with pulse-start ignitor technology. Super
CWA Pulse Start ballasts, 88% efficient and EISA legislation compliant, are required for 151-400W (must order SCWA option) for U.S. shipments only. CSA, NOM or INTL required for probe start shipments outside the U.S. Compact fluorescent uses an electronic high-frequency ballast.
High-frequency generator for induction.
Socket: Porcelain, medium-base socket for ASW1, mogul-base socket for ASW2, with copper alloy, nickel-plated screw shell and center contact. Fluorescent is four-pin positive latching
thermoplastic. UL Listed. Compact fluorescent uses an electronic high-frequency ballast. LPI is standard 35K for CFL.
InstallationUniversal mounting plate with integral mounting bolts supports the fixture for easy one-person installation. Can mount facing up.
ListingsUL Listed to U.S. and Cana-dian safety standards. CSA Certified or NOM Certified (see Options). UL Listed suit-able for wet locations in up or down orientation. IP65 rated. U.S. Patent No. D500,569. Other patents pending.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASW1 100M SR3 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
H
DW
ASW1 ASW2 Width: 15 (38.1) 20-1/4 (51.4)
Depth: 13-3/4 (34.9) 18-3/4 (47.6)Height: 9-1/4 (25.5) 12-1/2 (31.8)Weight: 35 lbs (15.9 kg) 49 lbs (22.2 kg)
Notes1 Specify lamp type and distribution.
See Configurations table.
2 Not available with SCWA.
3 Not available with 480V.
4 Not available ASW1 SCWA.
5 Must be ordered with SCWA.
6 Not applicable with L/LP.
7 Available with SR3 only.
8 HS Option available.
9 DC options and GZ cannot be ordered together (ASW1 only).
10 Not available with compact fluorescent.
11 EC, QRS, QRSTD, DC options or SP cannot be ordered together.
12 Not available with HPS.
13 Must specify CWI for use in Canada
14 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ship as 120/347V.
15 Optional multi-volt electronic ballast (compact fluorescent only) capable of
operating on any line voltage between 120V and 277V.
16 Consult factory for available wattages.
17 May be ordered as accessory.
18 Must specify finish.
19 Prefix with fixture name and size (e.g., ASW2VG) when ordered as accessory.
20 Available for compact fluorescent units only; not available with 2/32TRT, 2/42TRT, 57TRT or 70TRT.
21 Battery pack (not included) to be mounted external to luminaire. Pilot light/test switch mounting plate included. 32°F min. operating temperature.
22 Not available with 2/42TRT.
23 Maximum allowable wattage lamp included.
24 Must be ordered with fixture; cannot be field installed. Not available 347V, 480V, or TB.
25 Only available with SR2 & SR3; SR4W (size 2 only).
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONASW1 70S, 100S, 150S SR2, SR3, SR4SC, GZASW1 26TRT, 2/32TRT, 2/42TRT SR3ASW1 32TRT, 42TRT, 57TRT, 70TRT SR2, SR3, SR4SC
ASW170M, 70MHC, 100M, 100MHC,
150M, 150MHC, 175MSR2, SR3, SR4SC, GZ, SP
ASW2175M, 200M, 250M, 320M,
350M, 400MSR2, SR3, SR4SC,
SR4W, SPASW2 200S, 250S, 400S SR2, SR3, SR4SC, SR4W
LAMP/FIXTURE DATALAMP TYPE CIRCUIT TYPE LAMP SHAPE BASE
70S, 100S, 150S HX-HPF E17 Medium250S, 400S CWA ET18 Mogul70M, 100M,
150M, 70MHC, 100MHC, 150MHC
HX-HPF E17 Medium
175M, 175MHC CWA E17 Medium250M, 250MHC CWA BT28 Mogul400M, 400MHC CWA ED28 Mogul
26DTT Electronic, HPF T4 G24Q-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-457TRT Electronic, HPF T4 GX24Q-570DTT Electronic, HPF T4 GX24Q-6
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
543www.lithonia.com | 1-800-279-8041PSG10
ArchitecturalW
ALL MO
UN
TED
Series Lamp type Distribution Voltage Ballast Mounting Options
MRW High pressure sodium1
35S2
50S
70S
100S
150S
Metal halide
50M1, 3
70M1, 3
100M1
150M
175M4
Metal halide ceramic5
50MHC1, 3
70MHC1, 3
100MHC1
150MHC
Compact fl uorescent1
26DTT
2/26DTT
26TRT
2/26TRT
32TRT
2/32TRT
42TRT
2/42TRT
FT Forward Throw
MD Medium throw
WT Wide throw
120
2086
2406
277
347
4806
TB7
MVOLT8
23050HZ9
(blank) Magnetic ballast
CWI Constant wattage isolated9
SCWA Super CWA ballast10
Ships installed
(blank) Mounting plate (std.)
Ships separately11, 12
BBW Surface-mounted back box13
UT5 Uptilt 5 degrees bracket14
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
ELDW Bodine emergency battery pack15, 16, 17
ELDWR Fixture wired ready for Bodine B30 battery pack15, 16, 18
ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack15, 16, 18, 19
EC Emergency circuit16, 20
QRS Quartz restrike system16, 20
Options (continued) Finish Lamped
ELED LED emergency single16, 21, 22
2ELED LED emergency double16, 21, 22
DC12 Emergency circuit 12V; 35W lamp included16, 23
2DC12 Emergency circuit 12V; two 35W lamps included16, 23
DC2012 Emergency circuit 12V; 20W lamp included16, 23
2DC2012 Emergency circuit 12V; two 20W lamps included16, 23
PE Photoelectric cell - button type24
DFL Diff using lens
IBS Internal backlight shield25
WLU Wet location door for up orientation
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL International shipment for 175M.
Ships separately11, 26
VG Vandal guard
WG Wire guard
(blank) Dark bronze, textured (std.)
DSST Sandstone-textured
DNAT Natural aluminum-textured
DWHG White-textured
DBLB Black-textured
DDB Dark bronze
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included27
L/LP Less lamp
MRWOmero™
Intended Use
For building- and wall-
mounted applications.
Construction
Rugged, die-cast, single-
piece aluminum housing.
Die-cast doorframe has a
1/8" thick tempered glass
lens. Doorframe is fully
gasketed with one-piece
solid silicone.
Standard fi nish is textured
dark bronze (DDBT)
corrosion-resistant polyester
powder fi nish. Additional
architectural colors are
available; see
www.lithonia.com/archcolors.
Striping is also available.
Optics
Segmented refl ectors
provide superior uniformity
and control. Refl ectors are
interchangeable. Three full
cutoff distributions available:
FT (forward throw), MD
(medium throw) and WT
(wide throw).
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W. MH: 150W and below
are standard with pulse-start
ignitor technology. CSA, NOM
or INTL required for probe
start shipments outside the
U.S. for 175M. Not available
with 175M SCWA. Compact
fl uorescent uses an electronic
high-frequency ballast.
Socket: Porcelain, medium-
base socket for MRW with
copper alloy, nickel-plated
screw shell and center con-
tact. Fluorescent is four-pin
positive latching thermo-
plastic. UL Listed. Compact
fl uorescent uses an electronic
high-frequency ballast. LPI is
standard 35K for CFL.
Installation
Universal mounting mecha-
nism with integral mounting
support allows fi xture to
hinge down. Bubble level
provides correct alignment
with every installation.
Listings
UL Listed to U.S. and Canadian
safety standards. NOM Certi-
fi ed (see Options). UL listed
suitable for wet locations
(damp location listed in lens
up orientation). WLU option
off ers wet location listing in
up orientation (see Options).
IP65 rated. 25°C ambient.
U.S. patent No. D565.232.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: MRW 100M FT TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
18(45.7)
9(22.8)
7-1/4(18.2)
Weight: 35 lbs (15.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 120V, NPF only.
3 Not available with 480V.
4 Not available with SCWA. Requires CSA, NOM, or INTL.
5 Not applicable with L/LP.
6 Must specify CWI for use in Canada.
7 Optional multi-tap ballast (120, 208, 240, 277V); (120, 277, 347V in Canada; ships as 120V/347V).
8 Optional multi-volt electronic ballast (compact fl uorescent only) capable of operating any line voltage from 120V-277V.
9 Consult factory for available wattages.
10 Only available with 150M or 150MHC.
11 May be ordered as an accessory.
12 Must specify fi nish.
13 Order WSBBW when needed as an accessory.
14 Order WSUT5 when needed as an accessory.
15 Available for compact fl uorescent units only. Must specify voltage.
16 Only one emergency option available per fi xture.
17 Not available with 2/32TRT or 2/42TRT.
18 Battery pack (not included) to be mounted external to luminaire. Pilot light/test switch mounting plate included. 32°F min. operating temperature.
19 Not available with 2/42TRT.
20 Maximum allowable wattage lamp included.
21 Available in 120V or 277V only.
22 Maximum wattage 100M or 70S.
23 Not available with fusing.
24 Must be ordered with fi xture; cannot be fi eld installed. Not available 347V, 480V, or TB.
25 Not available with medium throw.
26 Prefi x with fi xture name and size (e.g., MRWVG)
27 For medium throw distribution, lamp is coated.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com544
Series Lamp type Distribution Voltage Ballast Mounting
WSQ Quartersphere
WSR Half round
WST Trapezoid
High pressure sodium1
35S2
50S
70S
100S
150S
Metal halide
50M1, 3
70M1, 3
100M1
150M
175M4
Metal halide ceramic5
50MHC1, 3
70MHC1, 3
100MHC1
150MHC
Compact fl uorescent1, 6
26DTT
2/26DTT
32TRT
2/32TRT
42TRT
2/42TRT
Downlight distribution
FT Forward throw
MD Medium throw
WT Wide throw
Up/Down distribution7, 8
FTU Forward throw with 10% uplight
MDU Medium throw with 10% uplight
MDU5 50% Up/down medium throw
WTU Wide throw with 10% uplight9
120
20810
24010
277
347
48010
TB11
MVOLT12
23050HZ13
(blank) Magnetic ballast
CWI Constant wattage isolated13
SCWA Super CWA ballast
Ships installed
(blank) Mounting plate (std.)
Ships separately14, 15
BBW Surface-mounted back box16
UT5 Uptilt 5 degrees bracket17
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing18
ELDW Bodine emergency battery pack18, 19, 20, 21
ELDWR Fixture wired ready for Bodine B30 battery pack18, 19, 20, 22
ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack18, 19, 20, 22, 23
EC Emergency circuit20, 24
QRS Quartz restrike system20, 24
ELED LED emergency single20, 25
2ELED LED emergency double20, 25
DC12 Emergency circuit 12V; 35W lamp included20, 26
2DC12 Emergency circuit 12V; two 35W lamps included20, 26
DC2012 Emergency circuit 12V; 20W lamp included20, 26
2DC2012 Emergency circuit 12V; two 20W lamps included20, 26
PE Photoelectric cell - button type19, 27
DFL Diff using lens
IBS Internal backlight shield28
UCS Uplight component shield29
WLU Wet location door for up orientation
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL International shipment for 175M
Ships separately14, 30
VG Vandal guard
WG Wire guard
(blank) Dark bronze, textured (std.)
DNAT Natural aluminum-textured
DWHG White-textured
DBLB Black-textured
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included31
L/LP Less lamp
WAL
L M
OU
NTE
DArchitectural
WSTWSRWSQ
Intended UseFor building- and wall-mounted applications.
ConstructionHousing: Rugged, die-cast, single-piece housing. Die-cast doorframe has 1/8" thick tem-pered glass lens. Doorframe is fully gasketed with one-piece solid silicone. Standard fi nish is textured dark bronze (DDBT) corrosion-resistant polyester powder. Additional architec-tural colors are available; see www.lithonia.com/archcolors. Striping is also available.
OpticsInterchangeable, segmented refl ectors for superior unifor-
mity and control. Three full cutoff distributions available: FT (forward throw), MD (me-dium throw) and WT (wide throw). Four uplight distribu-tions available in WSR only: FTU (forward throw, 10% up), MDU (medium throw, 10% up), WTU (wide throw, 10% up) and MDU5 (up/down, medium throw, 50% up, 50% down). Compact fl uorescent MD (medium throw) only.
ElectricalBallast: All ballasts are 100% factory tested. Reactor high power factor for 35S. High reactance, high power factor for 50-150W. Constant wattage autotransformer for
175W. MH: 150W and below are standard with pulse-start ignitor technology. CSA, NOM or INTL required for probe start shipments outside the U.S. for 175M. Not available 175M SCWA. Compact fl uorescent uses an electronic high-frequency ballast.
Socket: HID is porcelain, medium-base copper alloy, nickel-plated screw shell and center contact. (UL Listed 660W, 600V 4KV pulse rated). Fluorescent is four-pin posi-tive latching thermoplastic. LPI is standard 35K for CFL.
InstallationUniversal mounting mecha-nism with integral mounting support allows fi xture to hinge down. Bubble level provides correct alignment with each installation.
ListingsUL Listed suitable for wet locations (damp location listed in lens-up orientation). CSA Certifi ed (see Options). IP65 rated.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: WST 100M FT 120 PE LPI
WST
16-1/4(41.2)
7-1/4(18.4)
9-1/8(23.2)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
18(45.7)
7-1/4(18.4)
9(22.8)
WSR
Max. weight: 30 lbs (13.6 kg)
18(45.7)
9-3/8(23.8)
9(22.8)
WSQ
Notes1 Not available with SCWA.
2 120V only.
3 Not available with 480V.
4 Not available with SCWA. Requires CSA, NOM, or INTL.
5 Not applicable with L/LP.
6 Only available with MD, MDU and MDU5 distributions.
7 Available on WSR fi xture only.
8 Must be ordered with fi xture; no fi eld modifi cations.
9 Colored uplight lens available. See www.lithonia.com. Only available with WTU distribution.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Optional multi-volt electronic ballast (compact fl uorescent only) capable of operating on any line voltage from 120V-277V.
13 Consult factory for available wattages.
14 May be ordered as an accessory.
15 Must specify fi nish.
16 Order as WSBBW for accessory.
17 Order as WSUT5 for accessory.
18 Available for compact fl uorescent units only.
19 Must specify voltage.
20 Only one emergency option available per fi xture.
21 Not available with 2/32TRT or 2/42TRT.
22 Battery pack (not included) to be mounted external to luminaire. Pilot light/test switch mounting plate included. 32°F min. operating temperature.
23 Not available 2/42TRT.
24 Maximum allowable wattage lamp included.
25 Available 120V or 277V only. Maximum wattage 100M or 70S.
26 Not available with fusing.
27 Not available 347V, 480V, or TB.
28 Not available with medium throw.
29 For WSR, inverted orientation, with FTU and WTU distributions only.
30 Prefi x with fi xture name (e.g., WSRVG) for accessory. WSQ ships same as WSR.
31 For medium throw distribution, lamp is coated.
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
WST
WSR
WSQ
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
545www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
Architectural
Series Lamp type Distribution Voltage Ballast Mounting Options
WSTM High pressure sodium
35S1
50S
70S
Metal halide
50M
70M
Metal halide ceramic2
50MHC
70MHC
Compact fl uorescent
26DTT
26TRT
32TRT
42TRT
MD Medium throw 120
2083
2403
277
347
TB4
MVOLT5
23050HZ6
(blank) Magnetic ballast
CWI Constant wattage isolated6
Ships installed
(blank) Mounting plate (std.)
Ships separately
UT5 Uptilt 5 degrees bracket7
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
GMF Internal slow-blow fusing8
EC Emergency circuit9
QRS Quartz restrike system9
DC12 Emergency circuit 12V; 35W lamp included10, 11
DC2012 Emergency circuit 12V; 20W lamp included10, 11
Options (continued) Finish Lamped
PE Photoelectric cell - button type12, 13
DFL Diff using lens
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
Ships separately
WG Wire guard12
Fixture
(blank) Dark bronze, textured (std.)
DSST Sandstone-textured
DNAT Natural aluminum-textured
DWHG White-textured
DBLB Black-textured
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
Optional stripe
SDDB Dark bronze stripe
SDWH White stripe
SDBL Black stripe
SDNA Natural aluminum stripe
SDSS Sandstone stripe
SDTG Tennis green stripe
SDBR Bright red stripe
SDBUA Dark blue stripe
SDYLB Yellow stripe
LPI Lamp included14
L/LP Less lamp
WSTMIntended Use
For building- and wall-
mounted applications.
Construction
Rugged, die-cast, single-
piece aluminum housing.
Die-cast doorframe has a
1/8" thick tempered glass
lens. Doorframe is fully
gasketed with one-piece
solid silicone.
Standard fi nish is textured
dark bronze (DDBT)
corrosion-resistant polyester
powder fi nish. Additional
architectural colors are
available; see
www.lithonia.com/archcolors.
Striping is also available.
Optics
Hydroformed refl ector for
superior uniformity and
control. Medium throw (MD)
full cut off distribution only.
Electrical
Ballast: All ballasts are 100%
factory tested. Reactor high
power factor for 35S. High
reactance, high power factor
for 50-70W. MH: 70W and
below are standard with
pulse-start ignitor technol-
ogy. Compact fl uorescent
utilizes an electronic, high-
frequency ballast.
Socket: Porcelain, medium-
base socket with copper alloy,
nickel-plated screw shell and
center contact. Fluorescent
is four-pin positive latching
thermoplastic. LPI is standard
35K for CFL. UL Listed.
Installation
Easily installed using provid-
ed mounting strap. Mount to
any non-combustible vertical
surface or to a 4" round or
square outlet box. Back access
through slotted gasket.
Listings
Listed and labeled to UL
standards. Listed and
labeled to CSA standards (see
Options). NOM Certifi ed (see
Options). IP65 rated. Wet
location listed.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: WSTM 70M MD 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
12-1/2(31.8)
5-3/4(14.6)
7-1/2(19.1)
Max. weight: 14 lbs. (6.35 kg)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 120V only.
2 Not applicable with L/LP.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Multi-volt electronic ballast (compact fl uorescent only) capable of operating on any line voltage between 120V and 277V.
6 Consult factory for available wattages.
7 May be ordered as an accessory. Must specify fi nish. Order as WSUT5.
8 CFL only. Must specify voltage. Not available with MVOLT.
9 Maximum wattage lamp included.
10 Available for HID only.
11 Not available with SF or DF.
12 Must be ordered with fi xture; cannot be fi eld installed.
13 Not available in 347V or TB.
14 For medium throw distribution, lamp is coated.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com546
WAL
L M
OU
NTE
DArchitectural
WFL
Series Lamp type1 Distribution1 Voltage Ballast Mounting
WFL2
WFL3
High pressure sodium2
70S
100S
150S
250S
400S
Metal halide
70M2, 3
100M2
150M
175M4
200M5
250M
320M5
350M5, 6
400M6
Metal halide ceramic7
70MHC2, 3
100MHC2
150MHC
GZ Wall grazing
SP Spot
BP Bi-peak symmetric8
FT Forward throw
HPM Medium asymmetric
HPN Narrow asymmetric
HPW Wide asymmetric
RM Medium symmetric
RN Narrow symmetric
RW Wide symmetric
120
2089
2409
277
347
4809
TB10
23050HZ11
(blank) Magnetic ballast
CWI Constant wattage isolated11
SCWA Super CWA ballast
Ships installed
(blank) Mounting plate (std.)
Ships separately12, 13, 14
BBW Surface-mounted back box
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit15
QRS Quartz restrike system15
PE Photoelectric cell - button type16
LC90 Lock at 90 degrees for full cutoff
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately12, 17
BD Barn door13
BV Bottom visor13
BVG Bubble vandal guard
EV Eggcrate visor (black only)
FV Full visor13
UV Upper visor13
UV/BVG Upper visor and bubble vandal guard13
VG Vandal guard
WG Wire guard13
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DGYL Gray
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For building- and wall-
mounted applications.
Construction
Housing: Extruded aluminum
body with cast end caps is
mounted with 1/4" bolts, to
formed steel wall bracket.
Housing body can be rotated
and locked in any position
along horizontal axis. Cast
aluminum lens frame is
hinged and secured by
stainless steel fasteners.
Closed cell silicone gasket
prevents the penetration
of dust and moisture. Clear,
impact-resistant, tempered
glass lens with silkscreen.
Finish: Standard finish is dark
bronze (DDB) corrosion-
resistant polyester powder.
Additional architectural
colors are available; see
www.lithonia.com/archcolors.
Optics
Anodized aluminum
reflectors: Segmented,
specular or hammertone
finish. Reflectors are field
interchangeable.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S.
Socket: Horizontal porcelain
socket (WFL2 medium-base,
WFL3 mogul-base) with
copper alloy, nickel-plated
screw shell and center con-
tact. UL Listed 660W, 600V
4KV pulse rated.
Installation
Steel mounting plate attaches
directly to industry standard
junction box. Mounting
plate includes provision for
attachment independent of
junction box (required for
WFL3). Optional backbox wall
mounting available for surface
conduit applications.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient and
wet locations. IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: WFL2 100M FT 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
WFL270S, 70M, 70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC,
175M
SP, BP, RN, RM, RW, HPN, HPM, HPW, FT, GZ
WFL3175M, 200M, 250S, 250M, 320M,
350M, 400S, 400MSP, RN, RM, RW, HPN, HPM, HPW,
FT, GZ
LAMP/FIXTURE DATALAMP TYPE
NEMA DIST.
CIRCUIT LAMP
SHAPEBASE
BEAM SPREAD
H° x V°
150S SP HX-HPF E17 Medium 142x127 7x6150S HPW HX-HPF E17 Medium 39x12 3x1400S SP CWA ET18 Mogul 60x13 4x1400S HPW CWA ET18 Mogul 144x140 7x7175M SP CWA ED17 Medium 27x15 2x1175M HPW CWA ED17 Medium 147x127 7x6400M SP CWA BT28 Mogul 42x17 3x1400M HPW CWA BT28 Mogul 146x140 7x7
W D
H
WFL2 WFL3 EPA: 1.3 ft2 (0.12 m2) 2.0 ft2 (0.19 m2) Height: 6-3/4 (17.1) 8-3/4 (22.3) Width: 18-1/2 (47.0) 21-1/2 (54.6) Depth: 11-3/4 (26.6) 14-3/4 (37.5) Max weight: 25 lbs (11.3 kg) 39 lbs (17.7 kg)
Notes1 Specify lamp type and distribu-
tion. See Configurations table.
2 Not available with SCWA
3 Not available with 480V.
4 Not available with WFL2 SCWA.
5 Must be ordered with SCWA.
6 Requires ED-28 reduced jacket lamp.
7 Not applicable with L/LP.
8 WFL2 only.
9 Must specify CWI for use in Canada.
10 Optional multi-tap ballast (120V, 208V, 240V, 277V).
In Canada 120V, 277V, 347V; ships as 120V/347V.
11 Consult factory for available wattages.
12 May be ordered as an accessory.
13 Must specify finish.
14 Prefix with WFL and size (e.g., WFL2BBW).
15 WFL3 only. Maximum allow-able wattage lamp included.
16 Must be ordered with fixture; cannot be field installed. Not available 347V, 480V, or TB.
17 Prefix with KFLWFL and size (e.g., KFLWFL2BVG).
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATIONPRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
547www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
Specification
Series Lamp type1 Distribution Voltage Ballast Mounting
KL High pressure sodium
50S
70S
100S
Metal halide
70M
100M
Incandescent
I2
A Area
D Directional
120
2083
2403
277
347
TB4
23050HZ5
(blank) Magnetic ballast
CWI Constant wattage isolated5
(blank) Stud wall mount BBS (std.)
BBW Surface-mounted back box
BBF Pendant mount (flat surface)
BBR Recessed BBR (ceiling, soffit mount)
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
EC Emergency circuit6
QRS Quartz restrike system6
PE Photoelectric cell - button type7
CSA Meets Canadian standards
(blank) Dark bronze
DWH White
DBL Black
DNA Natural aluminum
LPI Lamp included8
L/LP Less lamp
KLIntended Use
For use in site walls or as
stair lighting.
Construction
Housing: One-piece, cast-
aluminum housing (alloy con-
tains less than 0.2% copper)
with integral splice compart-
ment (46 cu. in.); four 3/4"
NPT conduit entries. Lens is
one-piece, injection-molded,
UV-stabilized polycarbonate,
.125" minimum thickness.
Tooled-in, stippled texture
on non-optical portions. Die-
cut, closed-cell EPDM gasket.
Housing is shipped separately
from lens/reflector/power
module. Stainless steel, cap-
tive, Philips-type fasteners
(tamper-resistant fasteners
also provided). Standard lens
finish is dark bronze enamel
(painted on both inside
and outside of non-optical
portion). Black, white and
natural aluminum finishes
also available. Housing finish
is clear polyester powder
for corrosion protection.
Recessed concrete cast in
place is standard; optional
mountings available.
Optics
Optics: Reflectors are
anodized, hydroformed
aluminum. Two distributions
available: A (for uniform
symmetrical area lighting)
and D (for left or right
directional-throw area
lighting, featuring a unique
bi-adjustable socket assem-
bly that can be field-adjusted
up or down to provide
maximum light distribution
on stairway plane).
Electrical
Electrical: All ballasts are
100% factory-tested. Electri-
cal components are unitized
on removable power module.
Positive-locking disconnect
on primary and secondary cir-
cuits. Medium-base porcelain
socket, 4KV pulse rated.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KL 100M A TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
12-1/4(31.1)
14-1/4(36.2)
6(15.2)
2-1/4(5.6)Max weight: 15 lbs (7 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 For inverted mounting application, 70W max.
2 150W A21 max. in A distribution. 100W A21 max. in D distribution. 120V only.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada120V, 277V, 347V; ships as 120V/347V.
5 Consult factory for available wattages.
6 Maximum allowable wattage lamp included.
7 Must specify voltage. Only available with BBW, BBF. Not available in 347V or TB.
8 Not available with incandescent.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com548
WAL
L M
OU
NTE
DGeneral Purpose
TWFIntended Use
For building- and wall-
mounted applications.
Construction
Rugged, die-cast, single-
piece aluminum housing.
Die-cast doorframe has
impact-resistant, tempered,
glass lens, Doorframe is
fully sealed with a closed-cell
silicone gasket.
Finish: Standard finish is
textured dark bronze (DDBT)
polyester powder finish,
with additional architectural
colors available; see
www.lithonia.com/archcolors
Optics
Hydroformed reflector for su-
perior uniformity and control.
Vertical lamp orientation for
improved lamp output and life.
Electrical
Ballast: HID 70W-150W
utilizes a high reactance, high
power factor ballast. 175W-
400W utilizes a constant-
wattage autotransformer
ballast. HEB maximum
wattage is 100M. Super CWA
Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required for
151-400W (must order SCWA
option) for U.S. shipments
only. CSA, NOM or INTL
required for probe start
shipments outside the U.S..
Compact fluorescent uses an
electronic high-frequency
ballast.
Installation
A universal mounting plate
with integral mounting bolts
supports the fixture for easy,
one-person installation.
Listings
CSA listed to U.S. and
Canadian safety standards
suitable for wet locations in
the down orientation. NOM
Certified. IP65 rated. 175W
and below - listed to 40° C
ambient. CFL-2/42 and below
and 250W and above - listed
to 30° C ambient. Emergency
options in all wattages,
200W, and 70W and 57W CFL
- listed to 25° C ambient.
Series Lamp type Voltage Ballast Options
TWF11
TWF22
High pressure sodium
70S
100S
150S
200S
250S
400S
Metal halide
70M
100M
150M
175M
200M3
250M
320M3
350M3
400M
Metal halide ceramic4
70MHC
100MHC
150MHC
Compact fluorescent
26DTT
2/26DTT
32TRT
2/32TRT
42TRT
2/42TRT
57TRT
70TRT
120
2085
2405
277
347
4805
TB6
MVOLT7
(blank) Magnetic ballast
CWI Constant wattage isolated ballast8
SCWA Super CWA ballast9
HEB Electronic ballast9, 21
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing (not available with MVOLT; CFL only)
ELDW Bodine emergency battery pack10, 11
ELDWC Cold-weather emergency battery pack10, 12
ELDWR Fixture wired ready for Bodine B30 battery pack10, 13, 14
ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack10, 14, 15
EC Emergency circuit10, 16
Options (continued) Finish Lamped
QRS Quartz restrike system10, 16
QRSTD QRS time delay10, 16
ELED LED emergency single10, 17, 18
2ELED LED emergency double10, 17, 18
DC12 Emergency circuit 12V; 35W lamp included10, 19
2DC12 Emergency circuit 12V; two 35W lamps included10, 19
DC2012 Emergency circuit 12V; 20W lamp included10, 19
2DC2012 Emergency circuit 12V; two 20W lamps included10, 19, 20
PE Photoelectric cell - button type (not available TB, MVOLT or 480V)16, 18
PER NEMA twist-lock receptacle only (no photocell)16, 22
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
2/1 Two 1-lamp ballasts23
DS Dual switching23
Shipped separately24
TWF1BBW Surface mounted back box
TWF1WG Wire guard
TWF1VG Vandal guard
TWF2BBW Surface mounted back box
TWF2VG Vandal guard
TWF2WG Wire guard
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
(blank) Dark bronze, textured (std.)
DNAT Natural aluminum-textured
DWHG White-textured
DBLB Black-textured
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: TWF1 100M TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Available up to 150S, 200M, and 70TRT compact fluorescent.
2 Available in 250-400W HPS and MH.
3 Must be ordered with SCWA.
4 Must be ordered with lamp included (LPI).
5 Consult factory for availability in Canada.
6 Optional multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada--ships as 120/347 in Canada).
7 Optional multi-volt electronic ballast (for compact fluorescent only) capable of operating on any line voltage from 120V-277V.
8 Consult factory for availability.
9 SCWA: Not available with HPS and 70M or 100M; HEB: Only available with 70M or 100M.
10 Cannot be ordered with any other emergency option.
11 Available for compact fluorescent only; not available with 2/32TRT, 2/42TRT, 57TRT, or 70TRT.
12 Available for compact fluorescent only; not available with 57TRT or 70TRT.
13 Available for compact fluorescent only.
14 Pilot light/test switch mounting plate included.
15 Available for compact fluorescent only; not available with 2/42TRT, 57TRT, or 70TRT.
16 Must be ordered with fixture; cannot be field installed.
17 Maximum wattage 100M and 70S. Must specify 120V or 277V.
18 Must specify voltage.
19 Not available with SF, DF or GMF.
20 Consult factory for maximum HID wattage available with this option.
21 Available with the TWF1 only.
22 Available with the TWF2 only.
23 Available for compact fluorescent only; available with 2/26DTT, 2/32TRT, and 2/42TRT.
24 May be ordered as an accessory.
TWF1 TWF2 Depth: 9-5/8 (24.4) 12-3/8 (31.4)
Width: 16 (40.6) 18 (45.7)Height: 10-1/8 (25.7) 11-1/2 (29.2)
Max. weight: 24 lbs (10.8 kg) 39 lbs (17.6 kg)
DW
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATIONPRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
549www.lithonia.com | 1-800-279-8041PSG10
General Purpose
TWHIntended Use
For outdoor storage areas,
warehouse and factory pe-
rimeters, and loading docks.
Not recommended for
applications with fre-
quent exposure to harsh
chemicals or commercial
cleaning fluids (e.g., car
washes). Installations in
such environments may
lead to premature failure
of the luminaire and void
the warranty.
Construction
Housing: Rugged, die-cast
aluminum housing.
Corrosion-resistant captive
external hardware includes
slotted hex-head fasteners.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Reflector is specular anod-
ized aluminum. Refractor
is prismatic borosilicate
glass. Lens is sealed and
gasketed to inhibit entrance
of outside contaminants.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH:150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S. Compact
fluorescent uses an electronic
high-frequency ballast.
High-frequency generator
for induction.
Socket: Horizontally oriented,
mogul-base porcelain socket
for 175W and above, medium
base for 150W and below,
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W-
600V, 4KV pulse rated. Fluo-
rescent is four-pin positive
latching thermoplastic. LPI is
standard 35K for CFL.
Installation
Back housing is separated
from front housing, eliminat-
ing ballast weight and pro-
moting easy handling. Top
3/4" threaded wiring access.
Back access through remov-
able 3/4" knockout. Mount
on any flat, non-combustible
vertical surface.
Listings
UL Listed (standard). CSA or
NOM Certified (see Options).
UL Listed for 25°C ambient
and wet locations. IP65 rated
(250W and below) or IP54
rated (400W).
Series Lamp type Voltage Ballast
TWH High pressure sodium1
70S
100S
150S
200S
250S
400S
Metal halide
70M1, 2
100M1
150M
175M3
200M4
250M
320M4, 5
350M4, 5
400M5
Metal halide ceramic6
70MHC1, 2
100MHC1
150MHC
Compact fluorescent1
2/26DTT
2/26TRT
2/32TRT
2/42TRT
Induction1
70IL
100IL
Low pressure sodium1, 7
35L
Incandescent1, 8
300I
120
2089
2409
277
347
4809
TB10
MVOLT11
23050HZ12
(blank) Magnetic ballast
CWI Constant wattage isolated12
SCWA Super CWA ballast
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
EC Emergency circuit13
QRS Quartz restrike system13
QRSTD QRS time delay13
PE Photoelectric cell - button type14
PER NEMA twist-lock receptacle only15
FS Full shield
TP Tamperproof fasteners
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately16
VG Vandal guard
WG Wire guard
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included17
L/LP Less lamp
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWH 250S TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Not available with SCWA.
2 Not available 480V.
3 Universal, mogul base lamp allows TWH to be available with SCWA.
4 Must be ordered with SCWA.
5 Requires ED or BT 28 reduced jacket lamp.
6 Not applicable with L/LP.
7 Not available TB.
8 120V only, A21 lamp (not included).
9 Must specify CWI for use in Canada.
10 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
11 Optional multi-volt electronic ballast (for compact fluorescent or induction wattages only) capable of operating on any line voltage from 120V-277V.
12 Consult factory for available wattages.
13 Maximum allowable wattage lamp included.
14 Must be ordered with fixture; cannot be field installed. Not available with 347, 480 or TB.
15 Photocell not included.
16 May be ordered as accessory. Prefix with fixture name (e.g., TWHWG).
17 Not available with incandescent.
Weight: 26-42 lbs (11.7-19 kg)
15-3/4(40.0)
16-1/4(41.3)
8(20.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
LAMP/FIXTURE DATALAMP TYPE CIRCUIT LAMP SHAPE BASE
70S HX-HPF E17 Medium100S HX-HPF E17 Medium150S HX-HPF E17 Medium250S CWA BT28 Mogul400S CWA BT28 Mogul150M HX-HPF E17 Medium175M CWA BT28 Mogul250M CWA BT28 Mogul400M CWA ED or BT28 Mogul
WALL M
OU
NTED
PRODUCT INFORMATIONPRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com550
WAL
L M
OU
NTE
DGeneral Purpose
TWP
Series Lamp type1 Voltage Ballast
TWP High pressure sodium
35S2
50S
70S
100S
150S
Metal halide
70M1, 3
100M1
150M
175M4
Metal halide ceramic5
70MHC1, 3
100MHC1
150MHC
Low pressure sodium
35L3
Incandescent
200I6
Compact Fluorescent
26DTT
2/26DTT
26TRT
2/26TRT
32TRT
2/32TRT
42TRT
2/42TRT
120
2087
2407
277
347
4807
TB8
MVOLT9
23050HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated10
SCWA Super CWA ballast11
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing12
ELDWC Cold-weather emergency battery pack13
EC Emergency circuit14
QRS Quartz restrike system14
QRSTD QRS time delay14
PE Photoelectric cell - button type15
FS Full shield
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL International shipment for 175M.
Ships separately16
WG Wire guard
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For entrances, loading docks,
walkways and vehicle ramps.
Not recommended for
applications with fre-
quent exposure to harsh
chemicals or commercial
cleaning fluids (e.g., car
washes). Installations in
such environments may
lead to premature failure
of the luminaire and void
the warranty.
Construction
Housing: Rear housing is
rugged, die-cast aluminum.
Corrosion-resistant, captive
external hardware includes
slotted hex-head and
tamperproof fasteners.
Finish is dark bronze (DDB)
corrosion-resistant polyes-
ter powder.
Optics
Reflector is aluminum, fin-
ished in white enamel. Front
housing and refractor are
one-piece, injection-molded,
UV-stabilized polycarbonate.
Standard finish: front cover
has an opaque lower portion
and dark bronze painted
upper portion; back housing
is dark bronze polyester. Re-
fractor is sealed and gasketed
to inhibit the entrance of
outside contaminants.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer for
175W. MH: 150W and below
are standard with pulse-start
ignitor technology. CSA, NOM
or INTL required for probe
start shipments outside the
U.S. for 175M. Not available
in 175M with SCWA. Compact
fluorescent uses an electronic
high-frequency ballast.
Socket: Glazed porcelain
medium based (mogul based
175W), horizontally oriented
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 660W,
600V for medium base;
1500W, 600V for mogul base.
4KV pulse rated. Fluorescent
is four-pin positive latching
thermoplastic. LPI is standard
35K for CFL.
Installation
Top 3/4" threaded wiring
access. Back access through
3/4" opening. For feed-thru
wiring, use condulet tee
(not included). Mount on
any flat, non-combustible
vertical surface.
Listings
UL Listed (standard). CSA or
NOM Certified (see Options).
UL Listed for 25°C ambient
and wet locations. IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWP 150M TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
15-1/2 (39.4)
16-1/8 (41.0)
7-3/4 (19.7)
Weight: 17.9 lbs (8.1 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 120V only.
3 Not available with 480V.
4 Not available with SCWA. Requires CSA, NOM, or INTL.
5 Not applicable with L/LP.
6 120V only. A21 lamp (not included).
7 Must specify CWI for use in Canada; n/a 35S or 50S.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage between 120V and 277V.
10 Consult factory for available wattages.
11 Only available with 150M or 150MHC.
12 CFL only. Must specify voltage. Not available with MVOLT.
13 Must specify voltage. -20°C to 55°C operation. Not available with DC or EC.
14 Maximum allowable wattage lamp included.
15 Not available with 347V, 480V, or TB.
16 May be ordered as accessory: TWPWG.
LAMP/FIXTURE DATALAMP TYPE CIRCUIT LAMP SHAPE BASE
35S RHP E17 Medium50S RHP E17 Medium70S XHP E17 Medium
100S XHP E17 Medium150S XHP E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium
100M HX-HPF E17 Medium150M HX-HPF E17 Medium175M CWA BT28 Mogul
35L HPF-LAG T17 Medium
PRODUCT INFORMATIONPRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
551www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
General Purpose
Series Lamp type Voltage Ballast
TWA High pressure sodium
35S1
50S2
70S2
100S2
Metal halide
50M
70M
100M
Metal halide ceramic3
50MHC
70MHC
100MHC
Compact fluorescent
26DTT
26TRT
32TRT
42TRT
120
2084
2404
277
347
TB5
MVOLT6
23050HZ7
(blank) Magnetic ballast
CWI Constant wattage isolated1
XHP High reactance (lag), high power factor
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
GMF Internal slow-blow fusing8
EC Emergency circuit9
QRS Quartz restrike system9
PE Photoelectric cell - button type10
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
Ships separately
WG Wire guard11
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
TWAContour®
Intended Use
For entrances, stairwells,
corridors and other pedes-
trian areas.
Not recommended for applications with fre-quent exposure to harsh chemicals or commercial cleaning fluids (e.g. car washes). Installations in such environments may lead to premature failure of the luminaire and void the warranty.
Construction
Housing: Rear housing is
rugged, die-cast aluminum.
Front cover is one-piece,
UV-resistant, injection-
molded polycarbonate,
internally painted. Captive
external hardware is treated
for corrosion resistance and
includes slotted hex-head
and tamper-proof fasten-
ers. Finish is dark bronze
(DDB) corrosion-resistant
polyester powder.
Optics
Front housing and
refractor are one-piece,
injection-molded, UV-
stabilized polycarbonate.
High-performance optical
system consists of specular
anodized segmented reflec-
tor and computer-designed
prism pattern. Standard
finish is dark bronze
polyester enamel. Front
cover sealed with one-piece,
high-temperature silicone
gasket to inhibit entrance of
outside contaminants.
Electrical
Components are mounted to
the cast-aluminum housing,
promoting maximum heat
dissipation. Ballast: All
ballasts are 100% factory
tested. MH: High reactance,
high power factor for 150W
and below. 150W and below
are standard with pulse-start
ignitor technology. HPS:
Reactor normal power
factor standard for 120V,
HPF available (XHP option).
Other voltages are high power
factor standard. Fluorescent
ballasts are electronic HPF (26
DTT and TRT).
Socket: HID is porcelain, hori-
zontally oriented, medium-
base socket with copper
alloy, nickel-plated screw
shell and center contact. (UL
Listed 660W, 600V and 4KV
pulse rated.) Fluorescent is
four-pin positive latching
thermoplastic. LPI is standard
35K for CFL.
Installation
Top 1/2" threaded wiring
access. Back access through
3/4" opening. For feed-thru
wiring, use condulet tee
(not included). Mount on
any flat, non-combustible
vertical surface.
Listings
UL Listed (standard). CSA or
NOM Certified (see Options).
UL Listed for wet locations.
IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWA 100M 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
LAMP/FIXTURE DATALAMP TYPE CIRCUIT LAMP SHAPE BASE
35S RNPF E17 Medium50S RNPF E17 Medium70S RNPF E17 Medium
100S RNPF E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium
100M HX-HPF E17 Medium26DTT Electronic, HPF T4 GX32D-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-3
10 (25.4)
11-1/2(29.2)
9(22.7)
Max weight: 10 lbs (4.5 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 120V, NPF only.
2 120V RNPF is standard; 208V, 240V, 277V, 347V, and TB are high-reactance power factor.
3 Not applicable with L/LP.
4 Must specify CWI for use in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
6 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage from 120V-277V.
7 Consult factory for available wattages.
8 CFL only. Must specify voltage. Not available with MVOLT.
9 Maximum wattage lamp included.
10 Must specify voltage. Not available in 347V or TB.
11 May be ordered as an accessory: TWAWG.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com552
WAL
L M
OU
NTE
DGeneral Purpose
Series Lamp type Voltage Ballast Options
TWAC High pressure sodium
35S1
50S2
70S2
100S2
Metal halide
50M
70M
100M
Compact fluorescent
26DTT
32TRT
42TRT
120
2083
2403
277
347
TB4
MVOLT5
23050HZ6
(blank) Magnetic ballast
CWI Constant wattage isolated6
XHP High reactance (lag), high power factor7
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V
GMF Internal slow-blow fusing8
EC Emergency circuit9
QRS Quartz restrike system9
Options (continued) Finish Lamped
DC12 Emergency circuit 12V; 35W lamp included10
2DC12 Emergency circuit 12V; two 35W lamps included10
DC2012 Emergency circuit 12V; 20W lamp included10
2DC2012 Emergency circuit 12V; two 20W lamps included10
PE Photo electric cell - button type11
CSA Meets Canadian safety standards
NOM Meets Mexican standards (consult factory)
Ships separately12
WG Wire guard
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
TWACContour®
Intended Use
For entrances, stairwells, cor-
ridors and other pedestrian
areas. Not recommended
for applications with fre-
quent exposure to harsh
chemicals or commercial
cleaning fluids (e.g., car
washes). Installations in
such environments may
lead to premature failure
of the luminaire and void
the warranty.
Construction
Housing: Rear housing is
rugged, die-cast aluminum.
Front cover is one-piece,
UV-resistant, injection-
molded polycarbonate,
internally painted. Captive
external hardware is treated
for corrosion resistance and
includes slotted hex-head
and tamper-proof fasten-
ers. Finish is dark bronze
(DDB) corrosion-resistant
polyester powder.
Optics
Front housing and refractor
are one-piece, injection-
molded, UV stabilized
polycarbonate. One-piece,
die-formed reflector is
diffused aluminum. Refrac-
tor is clear polycarbon-
ate, providing IES cutoff
distribution and maximum
lateral light output. Stan-
dard finish is dark bronze
polyester enamel. Front
cover sealed with one-piece,
high temperature silicone
gasket to inhibit entrance of
outside contaminants.
Electrical
Components are mounted to
the cast-aluminum housing,
promoting maximum heat
dissipation. Ballast: All
ballasts are 100% factory
tested. MH: High reactance,
high power factor for 150W
and below. 150W and below
are standard with pulse-start
ignitor technology. HPS:
Reactor normal power
factor standard for 120V,
HPF available (XHP option).
Other voltage are high power
factor standard. Fluorescent
ballasts are electronic HPF
(26 DTT and TRT).
Socket: HID is porcelain, hori-
zontally oriented, medium-
base socket with copper
alloy, nickel-plated screw
shell and center contact. (UL
Listed 660W, 600V and 4KV
pulse rated.) Fluorescent is
four-pin positive latching
thermoplastic. LPI is standard
35K for CFL.
Installation
Top 1/2" threaded wiring
access. Back access through
3/4" opening. For feed-thru
wiring, use condulet tee
(not included). Mount on
any flat, non-combustible
vertical surface.
Listings
UL Listed (standard). CSA or
NOM Certified (see Options).
UL Listed for wet locations.
IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWAC 100S 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
LAMP/FIXTURE DATALAMP TYPE CIRCUIT LAMP SHAPE BASE
35S RNPF E17 Medium50S RNPF E17 Medium70S RNPF E17 Medium
100S RNPF E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium
100M HX-HPF E17 Medium26DTT Electronic, HPF T4 GX32D-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-3
Max. weight: 10 lbs (4.5 kg)
11-1/2(29.2)
9(22.7)
10(25.4)
Notes1 120V, NPF only.
2 120V RNPF is standard; 208/240/277/347V and TB are high reactance, high power factor.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating any line voltage from 120V-277V.
6 Consult factory for available wattages.
7 Only available with 120V.
8 CFL only. Must specify voltage. Not available with MVOLT.
9 Maximum wattage lamp included.
10 HID only, n/a QRS, EC or NOM.
11 Must specify voltage. Not available 347 or TB.
12 May be ordered as an accessory: TWACWG
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
553www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
General Purpose
Series Lamp type1 Voltage Ballast Options Finish Lamped
TWR1
TWR2
High pressure sodium
70S
100S
150S
250S
400S
Metal halide
70M
100M
150M
250M2
400M2
Compact fluorescent
2/42TRT3
120
TB4
MVOLT5
120/3476
(blank) Magnetic ballast
SCWA Super CWA ballast7
PE Photoelectric cell - button type8
CSA Meets Canadian standards
WG Wire guard9
(blank) Dark bronze LPI Lamp included
Intended Use
For mounting above entry-
ways and loading docks.
Contact with a direct
forceful spray of water
during operation can
result in glass breakage.
Not recommended for car
wash applications.
Construction
Housing: Rugged, die-cast
aluminum back housing and
hinged doorframe. Castings
are sealed with a one-piece
gasket to inhibit the entrance
of external contaminants.
Finish is bronze polyester
powder paint standard.
Optics
(TWR1, TWR2) Refractor is
prismatic borosilicate glass.
Reflector is die-formed anod-
ized stippled aluminum. TWR1
medium-base lamp and TWR2
mogul-base lamp included in
carton as standard.
Electrical
Ballast: All ballasts are
100% factory tested.
HPS: High reactance, high
power factor for 150W and
below. Constant wattage
autotransformer 250W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option). Compact
fluorescent uses an electronic
high-frequency ballast.
Socket: Porcelain, medium-
base socket for TWR1,
mogul-base socket for
TWR2, with copper alloy
nickel-plated screw shell and
center contact. Fluorescent
is four-pin positive latching
thermoplastic. LPI is standard
35K for CFL.
Installation
Housing configured for
mounting directly over a
standard 4" outlet box or
for surface wiring via any
of three convenient 3/4"
threaded conduit entry hubs.
Listings
UL Listed standard to
U.S. and Canadian safety
standards. CSA Certified (see
Options). UL/C-UL Listed for
wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1 150S TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPETWR1 70S, 70M, 100S, 100M, 150S, 150M, 2/42TRTTWR2 250S, 250M, 400S, 400M
ACCESSORIESORDER SEPARATELY
TWR1WG WireguardTWR2WG WireguardRK1 TWR1FA Lens repair kitRK1 TWR2FA Lens repair kit
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
9(22.9)
7-3/8(18.8)
13(33.0)
Weight: 18 lbs (8.1 kg)
TWR1
9-1/4(23.5)
D17-7/8(45.4)
250W 400W Depth: 9-3/8 (23.8) 12-1/2 (31.8) Weight: 26 lbs (11.8 Kg) 31 lbs (14Kg)
TWR2
Notes1 Specify lamp type. See Configurations table.
2 Must be ordered with SCWA option.
3 Available with MVOLT or 120V with PE only.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V).
5 Only available with 2/42TRT.
6 Only available with CSA.
7 Only available for 250M and 400M.
8 Available with 250M, 400M, 2/42TRT (120V) only. Consult factory for other wattage/voltage availability.
9 May be ordered as an accessory. Prefix with fixture name and size (e.g., TWR1WG).
TWR
TWR1
TWR2
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com554
WAL
L M
OU
NTE
DGeneral Purpose
PRODUCT INFORMATION
Series Lamp type1 Voltage Ballast Options Lamped
TWR1C
TWR2C
High pressure sodium
70S
100S
150S
250S
400S
Metal halide
70M
100M
150M
250M2
400M2
120
TB3
120/3474
(blank) Magnetic ballast
SCWA Super CWA ballast5
Ships installed
PE Photoelectric cell - button type6
CSA Meets Canadian standards
Ships separately
FCV Full cutoff visor7
WG Wire guard7
LPI Lamp included
Intended Use
For building- and wall- mount-
ed applications. Contact with
a direct forceful spray of
water during operation can
result in glass breakage.
Not recommended for car
wash applications. Cannot
be inverted.
Construction
Housing: Rugged, die-cast
aluminum back housing and
hinged doorframe. Castings are
sealed with a one-piece gasket
to inhibit the entrance of
external contaminants. Finish
is bronze polyester powder
paint standard.
Optics
Tempered glass lens and
one-piece anodized aluminum
reflector provide IES cutoff
distribution. Optional full cut-
off visor available. Lens tilted
30° up horizontal.
Electrical
Ballast: All ballasts are 100%
factory tested. HPS: High
reactance, high power factor
for 150W and below. Constant
wattage autotransformer
250W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant, are
required for 151-400W (must
order SCWA option).
Socket: Porcelain, medium-
base socket for TWR1C,
mogul-base socket for TWR2C,
with copper alloy nickel-plated
screw shell and center contact.
Installation
Housing configured for mount-
ing directly over a standard 4"
outlet box or for surface wiring
via any of three convenient 3/4"
threaded conduit entry hubs
(tops and sides).
Listings
UL Listed to U.S. and Canadian
safety standards. CSA Certified
(see Options). UL/C-UL Listed
for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1C 100M TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
PRODUCT INFORMATION General Purpose
Series Lamp type Voltage Lamped
TWR1S High pressure sodium
150S
Metal halide
100M
TB1 LPI Lamp included
Intended Use
For building- and wall-
mounted applications.
Contact with a direct
forceful spray of water
during operation can
result in glass breakage.
Not recommended for car
wash applications.
Construction
Housing: Rugged, die-cast
aluminum back housing and
hinged door frame. Castings
are sealed with a one-piece
gasket to inhibit the entrance
of external contaminants.
Finish is bronze polyester
powder paint standard.
Optics
Tempered glass lens and one-
piece anodized aluminum
reflector provide IES full
cutoff distribution. Medium-
base lamp included in carton
as standard.
Electrical
Quad-tap, high reactance,
high power factor is 100%
factory tested.
Installation
Housing configured for
mounting directly over a
standard 4" outlet box or
for surface wiring via any
of three convenient 3/4"
threaded conduit entry hubs.
Listings
UL Listed to U.S and Canadian
safety standards. UL/C-UL
Listed for wet locations. Not
available in Canada.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1S 100M TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Optional multi-tap ballast (120V, 208V, 240V, 277V).
CONFIGURATIONSSERIES LAMP TYPETWR1C 70S, 70M, 100S, 100M, 150S, 150MTWR2C 250S, 250M, 400S, 400M
DIMENSIONSDimensions are shown in inches (centimeters) unless otherwise noted.
TWR1C TWR2CHeight 10-1/4 (26.0) 14-1/2 (36.8)Width 13 (33.0) 17-7/8 (45.4)Depth 8-1/2 (21.6) 10 (25.4)Max. weight 18 lbs (8.1kg) 25 lbs (11.3kg)
ACCESSORIESORDER SEPARATELY
TWR1CWG Size 1 wireguardTWR2CWG Size 2 wireguardRK1 TWR1CFA Size 1 lens repair kitRK1 TWR2CFA Size 2 lens repair kitTWRIC FCV Size 1 full cutoff visorTWR2C FCV Size 2 full cutoff visor
Notes1 Specify lamp type. See configurations table.
2 Must be ordered with SCWA option.
3 Optional multi-tap ballast (120V, 208V, 240V, 277V).
4 Only available with CSA.
5 Only available for 250M and 400M.
6 Available with 250M, 400M, 400S (120V) only. Consult factory for other wattage/voltage availability.
7 May be ordered as an accessory. Prefix with fixture name and size (e.g., TWR1CWG or TWR1C FCV).
DIMENSIONSDimensions are shown in inches (centimeters) unless otherwise noted.
Height 16-1/2 (41.9)Width 12-1/4 (31.2)Depth 10-3/4 (27.3)Max. weight 15.5 lbs (7.0kg)
TWRC
TWRS
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
555www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
General Purpose
Series Lamp type Voltage Options Finish Lamped5 Packaging
TWS High pressure sodium
35S
50S
70S
Metal halide
50M
Compact fluorescent
13TT
26TRT1
32TRT1
42TRT1
120
MVOLT2
Ships installed
PE Photoelectric cell - button type3
Ships separately
WG Wire guard4
(blank) Dark bronze
DWH White
LPI Lamp included
L/LP Less lamp
M6
TWSIntended Use
For entrances, stairwells,
corridors and other pedes-
trian areas.
Construction
Housing: Cast aluminum
backplate on which electrical
components are mounted for
maximum heat dissipation.
Gasketing between backplate
and front cover prevents entry
of water and comtaminants.
External hardware includes
Phillips head and tamperproof
hex-head fasteners. Finish is
dark bronze.
Optics
Front cover/refractor is
injection-molded, one-
piece, UV stabilized polycar-
bonate. The optical system
is sealed and gasketed
to inhibit the entrance of
outside contaminants.
Electrical
35-70W HPS and 50W MH
use a 120V normal power
factor ballast, and lamp is
included as standard. The
13W compact fluorescent
uses a 120V electro-magnetic
ballast and includes a twin-
tube fluorescent lamp as
standard. The 26-42W
compact fluorescent uses a
multi-volt electronic ballast.
Options include 120-277V
operation and 26W, 32W or
42W triple-tube fluorescent
lamp (not included).
Socket: HID: Medium-base
porcelain socket, vertically
oriented with copper alloy
nickel-plated screw shell and
center contact. (UL Listed
660W, 600V). CFL: The 26-42W
fluorescent uses a universal
4-pin socket for 26W, 32W or
42W operation based on lamp
choice. The 13W fluorescent
uses a 2-pin socket.
Installation
Units for wall mounting
include two 3/4" knockouts
for routing electrical conduit
back and bottom.
Listings
UL Listed to U.S. and Canadi-
an safety standards. UL/C-UL
Listed for wet locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWS 50M 120 PE LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
ACCESSORIESORDER SEPARATELY
RK1 PEB1 Photocell kit, (120V only)TWSWG Wireguard
11(27.9)
6-7/8(17.4)
Weight: 4.9 lbs (2.2 kg)
5-1/4(13.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Ships as 26/42TRT. Operates 26-42W as standard base on lamp choice.
Lamp not included.
2 Not available with MH, HPS or 13TT.
3 Not available with MVOLT.
4 May be ordered as an accessory: TWSWG.
5 LPI standard for HID or 13TT; L/LP standard for 26-42TRT.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com556
WAL
L M
OU
NTE
DContractor Select Stock
BUILDING MOUNTED
Intended Use
Building-mounted light for
entrances, stairwells, corridors
and other pedestrian areas.
Construction
W: Cast aluminum backplate
with polycarbonate cover.
WC: Rugged, corrosion-resis-
tant, die-cast aluminum back
housing and hinged door
frame. Dark bronze finish.
Optics
Anodized aluminum reflector.
Electrical
Ballast: W: 120V normal power
factor. WC: Quad tap, high
reactance, high power factor.
Medium-base lamp included.
Installation
Housing configured for
mounting directly over a
standard 4" outlet box or
for surface wiring via any
of the convenient conduit
entry hubs (W: Two 3/4"
unthreaded knockouts, one
each on bottom and back.
WC: Four threaded 1/2"
plugs, one each side, top,
and bottom.)
Listings
Listed and labeled to UL
standards for wet locations.
Listed and labeled to CSA
standards. 25°C maximum
ambient temperature. Fix-
tures are covered by Lithonia
Lighting 12-month warranty
against mechanical defects
in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGE FINISHLAMP
INCLUDEDPHOTOCELL INCLUDED
APPROXIMATE WEIGHT (LBS)
STANDARD CARTON QUANTITY
W70SPL 120 M6 Non-cutoff 70 HPS 120 Dark bronze Y Y 5 6WC100ML M4 Cutoff 100 MH 120/208/240/277 Dark bronze Y N 10 4
TWR1 150M TB LPI Non-cutoff 150 MH 120/208/240/277 Dark bronze Y -- 18 1TWR1C 150M TB LPI Cutoff 150 MH 120/208/240/277 Dark bronze Y -- 18 1
TWR2 250M TB SCWA LPI Non-cutoff 250 MH 120/208/240/277 Dark bronze Y -- 26 1TWR2C 250M TB SCWA LPI Cutoff 250 MH 120/208/240/277 Dark bronze Y -- 21 1TWR2 400M TB SCWA LPI Non-cutoff 400 MH 120/208/240/277 Dark bronze Y -- 31 1
TWR2C 400M TB SCWA LPI Cutoff 400 MH 120/208/240/277 Dark bronze Y -- 25 1
11(27.9)
6-7/8(17.4)
5-1/4(13.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
W70SPL
8-5/8(21.9)
11-7/8(30.2)
8-3/8(21.3)
WC100ML
9(22.9)
7-3/8(18.8)
13(33.0)
TWR1
13(33.0)
10-1/4(26.0)
9-1/2(24.1)
TWR1C
9-1/4(23.5)
D17-7/8(45.4)
250W 400W Depth: 9-3/8 (23.8) 12-1/2 (31.8) Weight: 26 lbs (11.8 Kg) 31 lbs (14Kg)
TWR2
14-1/2(36.8)
17-7/8(45.4)
10(25.4)
TWR2C
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
557www.lithonia.com | 1-800-279-8041PSG10
WALL M
OU
NTED
Contractor Select Stock
VAPOR TIGHTS & CEILING MOUNT
UTILITY
Intended Use
Utility wall-, ceiling-, or
pendant-mounted fixtures for
general-purpose applications.
Incandescent, fluorescent,
metal halide, or high pressure
sodium sources.
Construction
Vapor tights: Rugged,
die-cast aluminum housing.
Gray finish.
VRC: Rugged, die-cast
aluminum housing. Dark
bronze finish.
Optics
Vapor tights: Prismatic globe
for even distribution.
VRC: Clear prismatic polycar-
bonate lens.
Electrical
Junction box included on
vapor tights. Ballast: 120V for
vapor tights; 120/277 for VRC.
Installation
Designed for easy installation
and maintenance.
Vapor tights: 3/4" threaded
knockouts allow for side or
top conduit entry.
VRC: Three threaded 1/2" NPS
plugs allow for conduit entry,
or housing may be mounted
over the outlet box.
Listings
Listed and labeled to UL stan-
dards for wet locations. Listed
and labeled to CSA standards.
Fixtures are covered by
Lithonia Lighting 12-month
warranty against mechanical
defects in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGELAMP
INCLUDEDAPPROX.
WEIGHT (LBS)STANDARD CARTON
QUANTITYVC150I M12 Vapor tight ceiling mount 150 Incandescent 120 N 2 12VP150I M12 Vapor tight pendant mount 150 Incandescent 120 N 2 12VW150I M12 Vapor tight wall mount 150 Incandescent 120 N 2 12
VC300I M6 Vapor tight ceiling mount 300 Incandescent 120 N 2 6VP300I M6 Vapor tight pendant mount 300 Incandescent 120 N 2 6VW300I M6 Vapor tight wall mount 300 Incandescent 120 N 2 6VC42L M6 Vapor tight ceiling mount 42 Fluorescent 120 Y 6 6VP42L M6 Vapor tight pendant mount 42 Fluorescent 120 Y 6 6VW42L M6 Vapor tight wall mount 42 Fluorescent 120 Y 6 6
VC100ML M6 Vapor tight ceiling mount 100 MH 120 Y 9 6VP100ML M6 Vapor tight pendant mount 100 NH 120 Y 8 6VW100ML M6 Vapor tight wall mount 100 MH 120 Y 10 6VC150SL M6 Vapor tight ceiling mount 150 HPS 120 Y 9 6VP150SL M6 Vapor tight pendant mount 150 HPS 120 Y 8 6VW150SL M6 Vapor tight wall mount 150 HPS 120 Y 10 6
VRC70ML 120/277 M6 Ceiling mount 70 MH 120/277 Y 9 6VRC70SL 120/277 M6 Ceiling mount 70 HPS 120/277 Y 9 6
W
H
VC150SL VC150I VC300I VC100ML Height: 9 (22.9) 11-3/8 (28.9) 14-7/8 (37.8) Width: 4-1/2 (11.4) 5-3/4 (14.6) 7 (17.8)
VC42L
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
W
H
VW150SL VW150I VW300I VW100ML
Height: 10 (25.4) 11-7/8 (30.2) 15-1/2 (39.4)Width: 7-1/4 (18.4) 8-3/4 (22.2) 8-3/4 (22.2)
VW42L
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
9(22.9)
9(22.9)
7-1/2(19.1)
VRC70
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com558
WAL
L M
OU
NTE
DContractor Select Stock
ENTRY LIGHTSIntended Use
For entrances in motels,
condominiums and other
pedestrian areas.
Construction
Die-cast aluminum housing
with electrostatically applied
dark bronze polyester powder
finish. White finish available.
Optics
Both white polycarbonate
globe and cylinder-shaped lens
are included with each fixture.
Electrical
Ballast: 120V.
Socket: Medium-base
porcelain socket, vertically
oriented with copper alloy,
nickel-plated screw shell and
center contact. Fluorescent
2-pin socket.
Installation
Building-mounted over
junction box.
Listings
Listed and labeled to UL stan-
dards for wet locations. Listed
and labeled to CSA standards.
Fixtures are covered by
Lithonia Lighting 12-month
warranty against mechanical
defects in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE VOLTAGE FINISHLAMP
INCLUDEDAPPROXIMATE WEIGHT (LBS)
STANDARD CARTON QUANTITY
JJ100I M6 Incandescent entry light 100 120 Dark bronze N 3 6JJ100IW M6 Incandescent entry light 100 120 White N 3 6
JJ13L 120 M6 Fluorescent entry light 13 120 Dark bronze Y 3 6JJ13IW 120 M6 Fluorescent entry light 13 120 White Y 3 6JJ50SL 120 M6 HPS entry light 50 120 Dark bronze Y 4 6
JJ50SLW 120 M6 HPS entry light 50 120 White Y 4 6
7-1/4(18.4)
6-3/8(16.2)
4-3/8(11.1)
6(15.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
6-3/8(16.2)
6-1/8(15.6)
4-3/8(11.1)
7-3/8(18.7)
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
559www.lithonia.com | 1-800-279-8041PSG10
PAR
KIN
G G
AR
AGE &
CAN
OP
YSpecification
Series Lamp type Voltage Ballast Mounting Options
PGR High pressure sodium1
70S
100S
150S
Metal halide
50M1, 2
70M1, 2
100M1
150M
175M
200M3
Metal halide ceramic4
50MHC1, 2
70MHC1, 2
100MHC1
150MHC
Electronic metal halide1, 2, 5
50M
70M
Compact fluorescent
2/42TRT
2/57TRT
2/70TRT
85TRT
Induction6
85IL
85IL/40
120
2087, 8
2407, 8
2778
3478
4807, 8, 9, 10
TB10,11
23050HZ12
MVOLT13
TVOLT14
(blank) Magnetic ballast
CWI Constant wattage isolated12
SCWA Super CWA ballast
HEB Electronic metal halide
Ships separately15
YK Yoke
OJB Offset junction box
OJBHK Offset junction box (for use with HEB, CFL, IL)
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
EC Emergency circuit16
QRS Quartz restrike system16
QRSTD QRS time delay16, 17
KW1 KiloWatch 120V control18
KW4 KiloWatch 277V control18
Options (continued) Finish Lamped
TP Tamperproof
HS House-side shield19, 20
HSR House-side glare shield ready19, 20
HA High ambient (40°C)20, 21, 22
FLR Frosted lower lens
DN Downlight focused8, 10, 19, 21
PC Polycarbonate refractor/lower housing/lens
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately15
BDS Bird deterrent shroud
(blank) White (std.)
DDB Dark bronze
DBL Black
DGC Charcoal gray
DNA Natural aluminum
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
LP Lamp factory installed
PGRIntended Use
For parking garage applications.
Construction
Upper housing: Rugged,
die-cast aluminum with
one-piece silicone gasketing.
Standard finish is white,
corrosion-resistant polyester
powder paint. Other archi-
tectural colors available as
listed below.
Lower Assembly: Precision
injection-molded, UV stabilized
acrylic. Hinged and secured
with four stainless steel screws.
Polycarbonate available.
Optics
Lower semi-specular,
faceted, vacuum metalized
aluminum reflector and
upper-precision, injection-
molded, prismatic acrylic
refractor. Polycarbonate
refractor available.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-200W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S. Electronic
MH: 180°C Class H insulation
system. Ballast is high
power factor, <15% THD with
starting temperature of -22°F
(-30°C). Compact Fluorescent:
Ballast is Class P, electronic,
high power factor, <10% THD
with starting temperature of
0°F (-18°C). Induction: High-
Frequency Generator - Sup-
plies high-frequency power
to the discharge vessel (lamp)
to initiate and maintain a gas
discharge for a rated 100,000
hours of life (optimized for
ambient temperatures rang-
ing from -40° to 25°C; higher
ambient temperatures may
reduce lamp life). Power Cou-
pler - Induction coil transfers
energy from the generator
to the discharge vessel.
Discharge Vessel - Glass bulb
contains a mixture of low-
pressure mercury vapor and
inert buffer gas. The wall of
the discharge vessel is coated
with a fluorescent powder
which produces light at
3000K color and 80+ CRI.
Socket: Medium-base,
UL Listed 660W, 600V, 4K
socket. CFL sockets are high
temperature thermoplastic
with integral retention clip.
LPI is standard 35K for CFL.
Installation
Mounting: Fully silicone-
gasketed, galvanized steel
plate. Surface mounts to
recessed box or pendant
mounts to industry standard
J-boxes. The quick-mounting
bracket doubles as a hanger
for the fixture, allowing
for trouble-free electrical
connections. The fixture
twist-locks into place in a
firm, secure fashion.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
25°C ambient operation and
wet locations. U.S. Patent
No. D402,075. Canadian
patent No. 86779.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: PGR 100M TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Max. weight: 20 lbs (9.0 kg)
15(38.1)
11-3/4(29.8)
Notes1 Not available with SCWA.
2 Not available with 480V.
3 Must be ordered with SCWA option.
4 Not applicable with L/LP.
5 Must be ordered with HEB option. (For ceramic lamp, order as 50MHC or 70MHC).
6 Must be ordered with LP option. Optimized for use in areas where ambient temperature does not exceed 20°C. Higher ambient temperatures may reduce lamp life.
7 Must specify CWI for use in Canada.
8 Not available with induction.
9 Available in 150S, 175M and 200M only.
10 Not available with compact fluorescent.
11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Consult factory for available wattages.
13 Optional multi-volt electronic ballast capable of operating on any line voltage from 120V-277V. Use for both compact fluorescent and electronic HID.
14 Optional tri-volt electronic ballast capable of operating on any line voltage from 200V-277V. Available with induction only.
15 May be ordered as an accessory. Must specify finish. Prefix with fixture name and size (e.g. PGRYK U).
16 Maximum allowable wattage lamp included.
17 Not available with KiloWatch.
18 Available with 175M, 200M and 150S only.
19 Not available with HA (high ambient) option.
20 Not available with DN (downlight focused) option.
21 Not available with HS (house-side glare shield).
22 Not available with 200M.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com560
PAR
KIN
G G
AR
AGE
& C
AN
OP
Y Specification
TGL TGRAcrylume®
Intended Use
For areas that require
optimum vertical illumina-
tion with glare control at
low mounting heights. Ideal
for parking garages, green-
houses, garden centers and
low-profile industrial aisles.
Certain airborne contami-
nants can diminish integrity
of acrylic. Refer to Acrylic
Environmental Compatibil-
ity tables on pages 794-795
for suitable uses.
Construction
Housing: Rugged, heavy, die-
cast aluminum housing. Stan-
dard finish is natural aluminum
polyester powder finish.
Induction lighting: High-
frequency generator/ballast
supplies high-frequency cur-
rent to the lamp to initiate and
maintain a gas discharge for a
rated 100,000 hours of life.
Optics
One-piece, injection-molded,
100% virgin acrylic refractor.
TGL Type V (A165), Type II (A162),
TGR Type V (A125) and Type 1
(A121) distributions are avail-
able. Polycarbonate refractor
available. Consult factory.
Electrical
Ballast: All ballasts are 100%
factory tested. HPS: Constant
wattage autotransformer.
MH: 175-200W fixtures
shipped within the U.S.
require super CWA pulse
start ballasts which are 88%
efficient and EISA-legislation
compliant (must specify
SCWA option). CSA, NOM
or INTL options required
for probe start shipments
outside the U.S.
Socket: Vertically oriented
mogul base protected exclu-
sionary "PINK" socket with
copper alloy, nickel-plated
screw shell and center contact.
For use with O-rated, protected
metal halide lamps only.
Installation
Standard quick-mount
attachment plate mounts
to 4" square or octagonal
J-box. Factory installed
pendant mount option
(PM) available.
Listings
TGL: UL Listed to U.S. and
Canadian safety standards.
NOM Certified. TGR: UL
Listed and CSA Certified. NOM
Certified. UL Listed for damp
locations. Ambient operation:
-30°C to 40°C (100M); -30°C
to 25°C (250M); -40°C to
25°C (85IL). UL wet location
standard for 150W metal
halide TGL / TGR. Optional for
all other wattages.
Series Lamp type6 Reflector Voltage Ballast Options
TGL
TGR
Protected metal halide
100MP
150MP
200MP
High pressure sodium
70S
100S
150S
Induction
55IL
85IL
A165
A162
A125
A121
TB4
120
2081,2,3
2401,2
277
347
480
TVOLT7
Pulse start metal halide
For shipments to U.S. territories, SCWA must be specified to comply with EISA.
SCWA Super constant wattage autotransformer
RLB Regulated Lag ballast
Non-EISA ballast
(blank) Standard magnetic ballast5
CWA Constant wattage5
CWI Constant wattage isolated 5
MRB Magnetic regular ballast
For options and accessories, see page 439.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TGL 200MP A165 TB SCWA
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
SERIESREFLECTOR
LAMP TYPETYPE V TYPE II
TGL A165 A162 100MP, 150MP, 200MP, 70S, 100S, 150S, 55IL, 85ILTGR A125 A121 100MP, 70S, 100S, 150STGL A165 A162 55IL, 85IL
16-3/4(42.5)
15-1/2(39.4)
Pendant mount
13(34.0)
Surface mount
13-3/8(34.0)
Pendant mount
12-1/2(31.8)
11-1/4(28.6)
Surface mount
TGR
Notes1 Requires CWI or RLB option in Canada for metal halide. Available
for 175-250W only.
2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-150W only.
3 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V; 120V, 277V, 347V in Canada).
5 Available for shipments outside of U.S. only. 150, 200W metal halide only.
6 Specify lamp type and reflector, see configurations table.
7 55IL and 85IL only.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
TGL
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
561www.lithonia.com | 1-800-279-8041PSG10
PAR
KIN
G G
AR
AGE &
CAN
OP
YSpecification
Series Lamp type Distribution Voltage Ballast Mounting
KPS High pressure sodium1
50S
70S
100S
150S
Metal halide
100M1
150M
175M
Metal halide ceramic2
100MHC1
150MHC
R2 Type II roadway
R3 Type III asymmetric
R4 Type IV, FT
R5 Type V symmetric
120
2083
2403
277
347
4803
TB4
23050HZ5
(blank) Magnetic ballast
CWI Constant wattage isolated5
SCWA Super CWA ballast
Ships installed
(blank) Ceiling mount (std.)
RMG Recessed mount 2"x2" (grid ceiling)6
Ships separately
YK Yoke7, 8, 9
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit10
QRS Quartz restrike system10
KW1 KiloWatch 120V control11
KW4 KiloWatch 277V control11
MOG Mogul base socket12
WL Wet location7
SS Stainless steel housing6
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL International shipment for 175M
Ships separately
VG Vandal guard8
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
KPSIntended Use
For parking garage applications.
Construction
Housing: Rugged, heavy-
gauge aluminum housing.
Square shape, continuous
welded seams for weather-
tight integrity.
Door Assembly: Extruded-
aluminum doorframe has an
impact-resistant, tempered
glass lens. Doorframe is
sealed to housing by EPDM
closed-cell gasket.
Finish: Dark bronze (DDB)
corrosion-resistant polyester
powder finish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Stainless steel housing also
available.
Optics
Reflectors are anodized,
hydroformed aluminum.
Four cutoff distributions
available: Type II (roadway),
Type III (asymmetric), Type
IV (forward throw) and
Type V (symmetric). Type V
reflector is vertically lamped;
all others horizontally
lamped. Reflectors are field-
interchangeable and hinge
out for easy removal during
installation/maintenance.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W. MH: 150W and below
are standard with pulse-start
ignitor technology. CSA, NOM
or INTL required for probe
start shipments outside
the U.S. for 175M. Electrical
components are unitized on
removable power module.
Positive-locking, quick-
disconnect on primary and
secondary circuits.
Socket: Medium-base
porcelain socket standard.
Mogul-base porcelain socket
for 175W metal halide. 4KV
pulse rated.
Installation
Direct mounting to recessed
J-box is standard; yoke or
recessed mountings optional.
Housing will accommodate
both top and side branch-
circuit wiring and has internal
splice compartment.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
damp locations. SS option:
UL Listed for 25°C ambient
and damp location. RMG
option: UL Listed for recessed
mounting, wet locations and
covered ceilings only.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KPS 100M R3 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
16-3/4(42.6)
10-1/2 (26.7)
Max. weight: 36 lbs (16 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 Not applicable with L/LP.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Consult factory for available wattages.
6 SS and RMG cannot be ordered together.
7 Not available with RMG.
8 May be ordered as an accessory. Prefix with fixture name (e.g., KPSYK U).
9 Must specify finish.
10 Maximum allowable wattage lamp included.
11 Available with 175M SCWA only.
12 Not available with metal halide.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com562
SpecificationPA
RK
ING
GA
RAG
E &
CA
NO
PY
KACMIntended Use
For parking garages,
convenience stores, hotels
and walkways.
For covered ceiling, mount on
concrete, steel or aluminum.
Not for use in dwellings.
Construction
Housing: Rugged, die-cast,
soft-corner aluminum hous-
ing with 0.12" nominal wall
thickness. Die-cast aluminum
doorframe has prismatic,
impact-resistant, tempered
glass; drop dish acrylic lens or
drop dish polycarbonate lens.
Doorframe is fully gasketed
with one-piece tubular sili-
cone. Surface mounted utiliz-
ing four 0.5" mounting holes
and one 0.875" wire-entry
hole (mounting hardware not
included). Dark bronze (DDB)
corrosion-resistant polyester
powder finish is standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Reflector is optical-quality
aluminum that works in
tandem with a light-diffusing
prismatic lens.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S. Induction:
High-Frequency Generator
- Supplies high-frequency
power to the discharge
vessel (lamp) to initiate and
maintain a gas discharge
for a rated 100,000 hours of
life (optimized for ambient
temperatures ranging from
-40° to 25°C; higher ambient
temperatures may reduce
lamp life).
Socket: Mogul-base porcelain
socket, 4KV pulse rated.
Position-oriented socket stan-
dard on all metal halide units.
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations. UL Listed for
25°C ambient temperature.
Series Lamp type Distribution Voltage Ballast Mounting
KACM High pressure sodium1
150S
250S
400S
Metal halide
100M1
150M
175M2
200M3
250M
320M3
400M
Metal halide ceramic4
100MHC1
150MHC
Induction
165IL5
FP Flat C73T6
DPA Drop acrylic
DPP Drop polycarbonate
120
2087
2407
277
347
4807
TB8
23050HZ9
TVOLT10
(blank) Magnetic ballast
CWI Constant wattage isolated9
SCWA Super CWA ballast
Ships installed
(blank) Ceiling mount (std.)
TC Thru-wire condulet tee
Ships separately11
YK Yoke12, 13
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit14
QRS Quartz restrike system14
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately11
VG Vandal guard15
WG Wire guard16
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
LP Lamp factory installed
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KACM 400M DPA TB SCWA LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
17-1/2(44.5)
7-1/8(18.1)
Max. weight: 40 lbs. (18.1 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Flat Lens
17-1/2(44.5)
Max. weight: 40 lbs. (18.1 kg)
11-1/8(28.3)
Drop Lens
Notes1 Not available with SCWA.
2 Universal mogul base lamp allows KACM to be available with SCWA.
3 Must be ordered with SCWA.
4 Not applicable with L/LP.
5 Must be ordered with LP option.
6 Not available with 165IL.
7 Must specify CWI for use in Canada.
8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
9 Consult factory for available wattages.
10 Induction only.
11 May be ordered as an accessory.
12 Order accessory as KACMYK.
13 Must specify finish.
14 Maximum allowable wattage lamp included.
15 FP lens only. Order accessory as KACVG.
16 Order accessory as KACWG.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
563www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GArchitectural
Series Lamp type1 Distribution Voltage Ballast Mounting
ASF1
ASF2
High pressure sodium2
50S
70S
100S
150S
200S
250S
400S3
Metal halide
50M2, 4
70M2, 4
100M2
150M
175M5
200M6
250M
320M6
350M6, 7
400M7
Metal halide ceramic8
50MHC2, 4
70MHC2, 4
100MHC2
150MHC
Compact fluorescent2, 9
26DTT
2/26DTT
32TRT
2/32TRT
42 TRT
2/42TRT
57TRT
70TRT
NSP Narrow spot
SP Spot
HSP Horizontal spot
MDF Medium flood
WDF Wide flood
VFW Vertical flood-wide
VFN Vertical flood- narrow
120
20810
24010
277
347
48010
TB11
MVOLT12
23050HZ13
(blank) Magnetic ballast
CWI Constant wattage isolated13
SCWA Super CWA ballast
Ships installed
(blank) ASF1 3/4" threaded knuckle (std.)
(blank) ASF2 swivel (std.)
YK Yoke mount
Ships separately14, 15
AFTM Tenon base mount
AFSTM Stanchion mount
AFWMA Wall-mount arm
AFTMB Twin mounting bar
AFTS Architectural tenon slipfitter for 3/4" THK option
AFSTMTHK Stanchion mount for 3/4" THK option
AFWMATHK Wall-mount arm for 3/4" THK option
AFWMPTHK Wall-mount plate for 3/4" THK option
AFTMBTHK Twin mounting bar for 3/4" THK option
AFJB Architectural J-box for 3/4" THK option
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
GMF Internal slow-blow fusing
EC Emergency circuit16
QRS Quartz restrike system16
QRSTD Quartz restrike time delay16
PE Photoelectric cell, button type17
2/1 Two 1-lamp ballasts18
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately14, 19
FV/BVG Full visor and vandal guard15
VG Vandal guard
BD Barn door15
FV Full visor15
EV Eggcrate visor (black only)
GS Glare shield (upper or bottom visor)15
(blank) Textured dark bronze
DSST Textured sandstone
DNAT Textured natural aluminum
DWHG Textured white
DBLB Textured black
DDB Dark bronze
LPI Lamp included
L/LP Less lamp
ASFAeris™
Intended Use
For landscape and facade
lighting.
Construction
Rugged, die-cast, single-
piece low copper alloy alumi-
num housing.
Door Assembly: Die-cast door-
frame has impact-resistant,
tempered glass lens. Door
frame is fully sealed with a
closed cell silicone gasket.
Finish: Standard finish is
textured dark bronze polyester
powder. Additional archi-
tectural colors available; see
www.lithonia.com/archcolors
for more information.
Optics
Anodized aluminum reflec-
tors; segmented, specular or
hammertone finish. Reflec-
tors are interchangeable and
allow for tool-less access to
electrical components.
Electrical
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S. Compact
fluorescent uses an electronic
high-frequency ballast.
Socket: Porcelain, medium-
base socket for ASF1, mogul-
base socket for ASF2, with
copper alloy, nickel-plated
screw shell and center con-
tact (UL Listed 660W, 600V,
4KV pulse rated). Fluorescent
is four-pin positive latching
thermoplastic. UL listed. LPI
is standard 35K for CFL.
Installation
ASF1 standard mounting is
cast 3/4" threaded knuckle.
ASF2 standard mounting is
heavy-duty, cast-aluminum
swivel that fits over standard
1-1/2" (1.9" O.D.) to 2" (2.38"
O.D.). Optional yoke mount-
ing available in both sizes.
Listings
UL Listed suitable for wet
locations in all orientations
and 25°C ambient. UL Listed
to U.S. and Canadian safety
standards. NOM Certified
(see Options). IP66 rated.
Patents pending.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASF1 100M WDF 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
ASF150S, 50M, 50MHC, 70S, 70M,
70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC, 175M
NSP, SP, HSP, MDF, WDF, VFW, VFN
ASF1
26DTT, 2/26DTT, 26TRT, 2/26TRT, 32TRT, 2/32TRT,
42TRT, 2/42TRT, 57TRT, 2/57TRT, 70TRT
WDF
ASF2175M, 200S, 200M, 250S, 250M, 320M, 350M, 400M
NSP, SP, HSP, MDF, WDF, VFW, VFN
ASF2 400S HSP, MDF, WDF, VFW, VFN
LAMP/FIXTURE DATALAMP TYPE
DISTRIBUTIONCIRCUIT TYPE
LAMP SHAPE
BASE TYPE
NEMA DIST.
150S HSP HX-HPF E17 Medium 5 x 3150S WDF HX-HPF E17 Medium 7 x 6400S HSP CWA ET18 Mogul 7 x 3400S WDF CWA ET18 Mogul 7 x 6175M NSP CWA E17 Medium 1 x 2175M HSP CWA E17 Medium 5 x 3175M WDF CWA E17 Medium 7 x 6400M NSP CWA ED28 Mogul 1 x 3400M HSP CWA ED28 Mogul 7 x 5400M WDF CWA ED28 Mogul 7 x 6
57TRT WDFElectronic,
HPFT4 GX24Q-5 7 x 6
70TRT WDFElectronic,
HPFT4 GX24Q-6 7 x 6
ASF1 ASF2 EPA: 1.2 ft2 (0.11m2) 2.0 ft2 (0.19m2)
Depth: 7-5/8 (19.3) 11 (27.9)Width: 15-1/2 (39.4) 21-1/2 (54.6)Height: 10-7/8 (27.6) 18-1/2 (47.0)
Max. weight: 20 lbs (9.0 kg) 35 lbs (15.8 kg)
DW
H
Notes1 Specify lamp type and distribution. See
Configurations table.
2 Not available with SCWA.
3 Not available with NSP or SP distributions.
4 Not available with 480V
5 Not available ASF1 SCWA.
6 Must be ordered with SCWA.
7 ED-28 reduced jacket lamp required.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
8 Not applicable with L/LP.
9 Available with ASF1 WDF distribution only.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
12 Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.
13 Consult factory for available wattages
14 May be ordered as accessory.
15 Must specify finish.
16 ASF2 only. EC, QRS, and QRSTD options cannot be ordered together. Maximum allowable wattage lamp included.
17 Must be ordered with fixture; cannot be field installed. Not available in 347V, 480V, or TB.
18 ASF1 with CFL only. Not available with PE.
19 Prefix with fixture name and size (e.g., ASF2FV).
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com564
ArchitecturalFL
OO
DLI
GH
TIN
G
Series Lamp type1 Distribution1 Voltage Ballast Mounting
KFL2
KFL3
High pressure sodium2
70S
100S
150S
250S
400S
Metal halide
70M2, 3
100M2
150M
175M4
200M5
250M
320M5
350M5, 6
400M6
Metal halide ceramic7
70MHC2, 3
100MHC2
150MHC
SP Spot
BP Bi-peak symmetric
FT Forward throw
HPM Medium asymmetric
HPN Narrow asymmetric
HPW Wide asymmetric
RN Narrow symmetric
RW Wide symmetric
120
2088
2408
277
347
4808
TB9
23050HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated10
SCWA Super CWA ballast
Ships installed
(blank) Swivel slipfitter (std.)
YK Yoke mount
THK Threaded knuckle mount
Ships separately11, 12
AFTM Tenon base mount13
AFSTM Stanchion mount13
AFWMA Wall-mount arm13
AFTMB Twin mounting bar13
AJB Architectural J-box for 1/2" THK option14
KFLSTMTHK Stanchion mount for 1/2" THK option14
KFLTMBTHK Twin mounting bar for 1/2" THK option14
KFLWMATHK Wall mount for 1/2" THK option14
TS Tenon slipfitter (2-3/8" OD max.)15
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit16
QRS Quartz restrike system16
PE Photoelectric cell, button type17
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately11, 18
UV/BVG Upper visor and bubble vandal guard12
WG Wire guard
BVG Bubble vandal guard
BD Barn door12
FV Full visor12
UV Upper visor12
BV Bottom visor12
EV Eggcrate visor (black only)
HLV Horizontal louver12
VLV Vertical louver12
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
KFLIntended Use
For landscape and facade
lighting.
Construction
Housing: Extruded
aluminum body with cast
end caps. Cast aluminum
doorframe is hinged and
secured by stainless steel
fasteners. Closed-cell
silicone gasket prevents
entrance of contaminants.
Clear, impact-resistant,
tempered glass lens with
silk screen.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Anodized aluminum
reflectors; segmented,
specular or hammertone
finish. Reflectors are field
interchangeable.
Electrical
Ballasts: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S.
Socket: Horizontal porcelain
socket (KFL2 medium base,
KFL3 mogul base) with copper
alloy, nickel-plated screw shell
and center contact. UL Listed
660W, 600V 4KV pulse rated.
Installation
Standard mount is two-piece,
heavy-duty, cast-aluminum
swivel with integral wiring
compartment (pictured).
Swivel fits over standard
1-1/2" (1.9" OD) to 2" (2.38"
OD) tenon. Corrosion-
resistant painted steel yoke
with 3-foot, 16/3 SEO cable
or threaded knuckle mount
(1/2" NPT) are optional.
Listings
UL Listed (standard). CSA Cer-
tified or NOM Certified (see
Options). UL Listed for 25°C
ambient and wet locations.
IP66 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KFL2 100M HPW 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Specify lamp type. See
Configurations table.
2 Not available with SCWA.
3 Not available with 480V.
4 Not available KFL2 SCWA.
5 Must be ordered with SCWA.
6 ED-28 reduced jacket lamp required.
7 Not applicable with L/LP.
8 Must specify CWI for use in Canada.
9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
10 Consult factory for available wattages.
11 May be ordered as an acces-sory.
12 Must specify finish.
13 For use with swivel mounting only. Must include swivel mount option on fixture.
14 For use with THK mounting only. Must include THK mount option on fixture.
15 For use with yoke mounting only. Must include yoke mount option on fixture.
16 Maximum allowable wattage lamp included. KFL3 only.
17 Must be ordered with fixture; cannot be field installed. Not available 347V, 480V, or TB.
18 Prefix with KFLWFL and size (e.g., KFLWFL2BVG).
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
KFL270S, 70M, 70MHC, 100S, 100M,
100MHC, 150S, 150M, 150MHC, 175MSP, BP, RN, RM, RW, HPN, HPM, HPW, FT
KFL3175M, 200M, 250S, 250M, 320M,
350M, 400S, 400MSP, RN, RM, RW, HPN, HPM, HPW, FT
LAMP/FIXTURE DATALAMP TYPE
DISTRIBUTIONCIRCUIT TYPE
LAMP SHAPE
BEAM SPREAD H° x V°
NEMA DIST.
150S SP HX-HPF E17 142 x 127 3 x 1150S HPW HX-HPF E17 39 x 12 7 x 6400S SP CWA ET18 60 x 13 4 x 1400S HPW CWA ET18 144 x 140 7 x 7175M SP CWA ED17 27 x 15 2 x 1175M HPW CWA ED17 147 x127 7 x 6400M SP CWA BT28 42 x 17 3 x 1400M HPW CWA BT28 146 x 140 7 x 7
W
H OH
D
KFL2 KFL3 EPA: 1.3ft2 (0.12m2) 2.0ft2 (0.19m2) Width: 17 (43.2) 20 (50.8) Depth: 8-1/8 (20.6) 9-1/8 (23.2) Height: 9-7/8 (25.1) 13-1/8 (33.3) Overall height: 14 (35.6) 16-7/8 (42.9) Max. weight: 29 lbs (13.1 kg) 44 lbs (19.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
565www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GSpecification
170SIntended Use
For airport aprons or
parking areas.
Construction
Housing: Rugged, heavy-
gauge, aluminum housing.
Continuous welded seams
for weather-tight integrity.
Aluminum door frame se-
cured with four stainless
steel latches. Thermal-
resistant and shock-resistant
tempered flat lens.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Anodized aluminum reflector
with internal glare control
louver, painted matte black
to provide an asymmetrical
beam pattern with sharp
vertical cutoff.
Electrical
Electrical components mount-
ed to heavy-gauge plate to
maximize heat dissipation and
structural integrity.
Ballast: All ballasts are 100%
factory tested. Constant
wattage autotransformer.
Super CWA Pulse Start bal-
lasts, 88% efficient and EISA
legislation compliant, are
required for 320-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Horizontal, mogul-
base porcelain socket with
copper alloy, nickel-plated
screw shell and center con-
tact. UL Listed 1500W-600V,
4KV pulse rated.
Installation
Painted steel yoke, complete
with vertical angle selector,
retaining stop and 3-foot,
14/3 cable, is standard.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient and
wet locations.
Series Lamp type Distribution Voltage Ballast Mounting
170S High pressure sodium
250S
400S
1000S
Metal halide
320M1
350M1
400M
1000M2
HPN Narrow asymmetric 120
2083
2403
277
347
4803
TB4
23050HZ5
Ships installed
(blank) Magnetic ballast
CWI Constant wattage isolated5
SCWA Super CWA ballast
Ships separately6
HRBW HID remote ballast weatherproof (black)
HRB HID remote ballast (white)
Ships installed
(blank) Yoke (std.)
Ships separately
TS Tenon slipfitter (2-3/8" OD max.)6, 7
MPB29 Mounting pole bracket for 2 fixtures at 90 degrees8
MPB39 Mounting pole bracket for 3 fixtures at 90 degrees8
MPB49 Mounting pole bracket for 4 fixtures at 90 degrees8
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
QRS Quartz restrike system9
PER NEMA twist-lock receptacle only10
CSA Meets Canadian standards
INTL Available for MH probe start shipping outside the U.S.
Ships separately6
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
UV Upper visor7
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 170S 400S HPN 120 SF LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
LAMP/FIXTURE DATA
LAMP TYPE DIST. BALLAST LAMP SHAPEBEAM SPREAD
H° x V°NEMA DIST.
250S HPN CWA ET18 128 x 55 6 x 4400S HPN CWA ET18 129 x 52 6 x 4
1000S HPN CWA E25 132 x 56 7 x 4400M HPN CWA BT37 139 x 68 7 x 4
1000M HPN CWA BT37 138 x 63 7 x 4
20(50.8)
EPA: 2.7 ft2 (0.25 m2) Max. weight: 83 lbs (37.6 kg)
20-1/2(52.1)
19-7/8(50.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Must be ordered with SCWA.
2 Requires a BT-37 reduced jacket lamp.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Consult factory for available wattages.
6 May be ordered as an accessory.
7 Must specify finish.
8 MPB bracket ships separately with junction box and hinge mecha-nisms. Bracket weight: 12 lbs. Must be ordered with fixture.
9 Maximum allowable wattage lamp included.
10 Photocell not included.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com566
SpecificationFL
OO
DLI
GH
TIN
G
Series Lamp type Distribution Voltage Ballast
95
95V
High pressure sodium
1000S
Metal halide
1000M
Horizontal lamp
RMH Medium horizontal lamp
RNH Narrow horizontal lamp1
RWH Wide horizontal lamp
BPH Bi-peak symmetric horizontal lamp2
SPH Spot horizontal lamp2
Vertical lamp
RMV Medium vertical lamp
RNV Narrow vertical lamp3
RWV Wide vertical lamp
BPV Bi-peak symmetric vertical lamp2
SPV Spot vertical lamp2
120
2084
2404
277
347
4804
TB5
23050HZ6
Ships installed
(blank) Magnetic ballast
CWI Constant wattage isolated6
SCWA Super CWA ballast
Ships separately7
HRBW HID remote ballast weatherproof (black)
HRB HID remote ballast (white)
Mounting Options Finish Lamped
Ships installed
(blank) Yoke (std.)
Ships separately7, 8
TS Tenon slipfitter (2-3/8" OD max.)
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
PER NEMA twist-lock receptacle only9
CSA Meets Canadian standards
Ships separately7
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
VG Vandal guard10
FV Full visor8, 10
UV Upper visor8, 10
BV Bottom visor8, 10
CV Concentric visor8, 10
GV Glare visor (three sided)8, 10
(blank) Dark bronze (std.)
DBL Black
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
95Intended Use
For large area facade or
monument floodlighting.
Construction
Housing: Rugged, heavy-
gauge, aluminum housing,
horizontal (95) or vertical
(95V) lamp orientation. Con-
tinuous welded seams, fully
gasketed for weathertight in-
tegrity. Aluminum doorframe
secured with four stainless
steel latches. Thermal-
resistant and shock-resistant
tempered flat lens.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Segmented anodized
aluminum, precisely
formed to provide varying
rectangular beam patterns
(non-rotatable).
Electrical
Electrical components mounted
to heavy-gauge plate to
maximize heat dissipation and
structural integrity. Ballast:
All ballasts are 100% factory
tested. Constant wattage
autotransformer.
Socket: Mogul-base porcelain
socket with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V. 4KV pulse
rated. Uses BT 56 lamp.
Installation
Painted steel yoke complete
with vertical angle selector
stop, re-aiming, and 3-foot,
14/3 cable is standard.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient and
wet locations.
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 95 1000S RMH 120 SF LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
DISTRIBUTION DATA95 95V
DISTRIBUTION 1000M 1000S 1000M 1000SRMH 4 x 1 5 x 2 3 x 5 6 x 6RNH 3 x 1 - 3 x 3 5 x 6RWH 5 x 1 5 x 1 3 x 5 6 x 6BPH - - 4 x 5 6 x 6SPH 2 x 1 4 x 1 - -RMV 5 x 3 6 x 6 1 x 4 2 x 5RNV 3 x 3 6 x 5 1 x 3 -RWV 5 x 4 6 x 6 1 x 4 1 x 5BPV 5 x 4 6 x 6 - -SPV - - 1 x 2 1 x 4
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA: 4.7 ft2 (0.44 m2) Max. weight: 90 lbs (40.8 kg)
24-1/2(62.5)
30(77.0)
12-1/2(31.8)
95
17(43.0)
30(77.0)
21(53.5)
EPA: 4.3 ft2 (0.40 m2) Max. weight: 90 lbs (40.8 kg)
95V
Notes1 Not available with 95 1000S.
2 BPH and SPV for use with 95V only. SPH and BPV for use with 95 only.
3 Not available with 95V 1000S.
4 Must specify CWI for use in Canada.
5 Multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
6 Consult factory for available wattages.
7 May be ordered as an accessory.
8 Must specify finish.
9 Photocell not included.
10 Prefix with fixture name and size (e.g., 95UV).
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
567www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GSpecification
55Intended Use
For large area facade or
monument floodlighting.
Construction
Housing: Rugged, heavy-
gauge, aluminum housing,
horizontal (55) or vertical
lamp (55V) orientation.
Continuous welded seams,
fully gasketed for weather-
tight integrity. Aluminum
doorframe secured with
four stainless steel latches.
Thermal-resistant, tempered
flat lens.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Anodized aluminum reflec-
tor. Seven distributions
available to provide varying
rectangular beam patterns
(non-rotatable).
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All bal-
lasts are 100% factory
tested. Constant wattage
autotransformer. Super CWA
Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required for
320-400W (must order SCWA
option) for U.S. shipments
only. CSA, NOM or INTL
required for probe start ship-
ments outside the U.S.
Socket: Mogul-base porcelain
socket with copper alloy,
nickel-plated screw shell
and center contact. UL Listed
1500W-600V. 4KV pulse rated.
Installation
Painted, steel yoke complete
with angle selector, aiming
stop, and 3-foot, 14/3 cable
is standard.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed for 25°C ambient and
wet locations.
Series Lamp type Distribution Voltage Ballast Mounting
55
55V
High pressure sodium
1000S
Metal halide
320M1
350M1
400M
1000M
RMA Medium A2
RNA Narrow A2
RWA Wide A2
RME Medium E3
RNE Narrow E3
RWE Wide E3
RPN Narrow peak3
120
2084
2404
277
347
4804
TB5
23050HZ6
Ships installed
(blank) Magnetic ballast
CWI Constant wattage isolated6
SCWA Super CWA ballast
Ships separately7
HRBW HID remote ballast weatherproof (black)
HRB HID remote ballast (white)
Ships installed
(blank) Yoke (std.)
Ships separately7, 8
TS Tenon slipfitter (2-3/8" OD max.)
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
QRS Quartz restrike system9
PER NEMA twist-lock receptacle only10
CSA Meets Canadian standards
INTL Available for MH probe start shipping outside the U.S.
Ships separately7
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
VG Vandal guard11
WG Wire guard11
FV Full visor8, 11
UV Upper visor8, 11
BV Bottom visor8, 11
GV Glare visor (three sided)8, 11
(blank) Dark bronze (std.)
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 55 1000S RPN TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
DISTRIBUTION DATA55 55V
DISTRIBUTION 1000M 400M 1000S 1000M 400M 1000SRME 6 x 5 6 x 5 6 x 5 4 x 6 5 x 6 5 x 6RNE 6 x 4 6 x 4 6 x 4 4 x 6 4 x 6 4 x 6RPN 6 x 2 6 x 2 5 x 1 1 x 6 1 x 6 1 x 5RWE 6 x 5 6 x 5 6 x 5 5 x 6 5 x 6 5 x 6RNA 5 x 1 - - 1 x 5 - -RMA 6 x 6 - - 6 x 6 - -RWA 6 x 5 - - 6 x 7 - -
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA: 3.5 ft2 (0.33 m2) Max. weight: 98 lbs (44.3 kg)
23-1/4(59.1)
17-1/3 (44.0)
23-1/4(59.1)
55
17-3/8(44.1)
12-1/2 (31.8)
32-1/2(82.6)
EPA: 3.8 ft2 (0.35 m2) Max. weight: 98 lbs (44.3 kg)
55V
Notes1 Must be ordered with SCWA.
2 RMA, RNA, RWA are for use with 1000M only and require standard BT-56 lamp.
3 RME, RNE, RPN, RWE require reduced jacket BT-37 lamp with 1000M.
4 Must specify CWI for use in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
6 Consult factory for available wattages.
7 May be ordered as an accessory.
8 Must specify finish.
9 Maximum allowable wattage lamp included.
10 Photocell not included.
11 May be ordered as accessory. Prefix with fixture name (e.g., 55UV).
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com568
Specifi cationFL
OO
DLI
GH
TIN
G
Series Lamp type1 Distribution1 Voltage Ballast Mounting
HFA
HFL
High pressure sodium2
250S
400S
Metal halide
250M
400M3
HFA
TA Horizontal
RN Narrow symmetric
HFL
RA2 Rectangular beam
120
2084
2404
277
347
4804
TB5
(blank) Magnetic ballast
SCWA Super CWA ballast
(blank) Yoke (std.)
Options Finish Lamped
Ships installed
TP Tamperproof latches6
CSA Meets Canadian standards
INTL Available for MH probe start shipping outside the U.S.
(blank) Dark bronze (std.)
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
HFAHFL
Intended Use
For general to heavy indus-
trial applications, including
Class 1, Division 2 classifi ed
hazardous locations, marine
and corrosive environments,
or wherever excessive vibra-
tion and dirt may exist.
Construction
Housing: NEMA heavy-duty
constructed housing. Die-cast
copper-free (<.4%) aluminum
housing with round corners
and front bezel. Front bezel is
removable via position-
oriented hinge-cam design.
Lens is thermal- and shock-
resistant, clear, tempered
glass with no metal-to-
glass contact. Hardware is
corrosion-resistant. Standard
fi nish is dark bronze (DDB)
corrosion-resistant polyester
powder. Additional architec-
tural colors available; see
www.lithonia.com/archcolors.
Optics
Computer-designed,
precision-formed refl ectors
for high performance and
effi cency. Premium one-piece
silicone gasket seals optical
chamber to inhibit entrance
of contaminants. HFL 400W
metal halide requires an ED28
reduced jacketed lamp.
Electrical
Electrical components are
mounted to cast aluminum
housing, promoting
maximum heat dissipa-
tion. Electrical: Ballast: All
ballasts are 100% factory
tested. Constant wattage
autotransformer 250W and
above. Super CWA Pulse Start
ballasts, 88% effi cient and
EISA legislation compliant,
are required for 250-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S..
Socket: Porcelain, horizontally
oriented mogul-base socket
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W,
600V, 4KV pulse rated.
Installation
HFA: front bezel is latched
for easy tool-less internal
access to optical and electrical
compartments. Corrosion-re-
sistant, heavy-duty, painted
steel mounting yoke. Three-
quarter-inch female threaded
conduit hub provided.
Listings
UL Listed (standard). CSA
Certifi ed (see Options). UL
Listed Class 1, Division 2,
Groups A, B, C and D for haz-
ardous locations. UL Listed
for marine outside locations.
IP65 rated.
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: HFA 400S TA 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
HFA 250S, 250M, 400S, 400M TA, RNHFL 400S, 400M RA2
TEMPERATURE CODES
SERIES LAMP TYPET-CODE OR
TEMP.MAX. INTERNAL
TEMP.HFA 250M T1 336°CHFA 400M T1 343°CHFA 250S T1 301°CHFA 400S T1 352°CHFL 400M T1 433°CHFL 400S T1 426°C
Notes1 Specify lamp type and distribution. See Confi gurations table.
2 Not available with SCWA.
3 HFL 400M must use reduced jacket ED-28 lamp.
4 Consult factory for availability in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
6 HFA only.
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
EPA: 2.6 ft2 (0.24 m2) Max. weight: 65 lbs (29.5 kg)
24(61.0)
10(25.4)
24-3/8(61.9)
HFA
15-3/4(40.0)
16-1/8(40.9)
6-1/8(15.5)
EPA: 1.3 ft2 (.12 m2) Max. weight: 27 lbs (12.3 kg)
HFL
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
569www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GSpecification
Series Lamp type1 Distribution1 Voltage Ballast Mounting Options Finish Lamped
HFM
HFR
High pressure sodium2
100S
150S
250S
400S
Metal halide
175M3
250M
400M
RG Horizontal
TA Horizontal
RB Vertical
RC Vertical
120
2084
2404
277
347
4805
TB6
(blank) Magnetic ballast
SCWA Super CWA ballast
(blank) Yoke (std.)
Ships installed
CSA Meets Canadian standards
INTL Available for MH probe start shipping outside the U.S.
(blank) Dark bronze (std.)
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
Intended Use
For general to heavy indus-
trial applications, including
Class 1, Division 2 classified
hazardous locations, marine
and corrosive environments,
or where excessive vibration
and dirt may exist.
Construction
Housing: NEMA heavy-duty
constructed housing. Die-cast
copper-free (<.4%) aluminum
housing with rounded corners
and front bezel. Front bezel is
removable via position-
oriented hinge-cam design.
Lens is thermal- and shock-
resistant, clear, tempered
glass with no metal-to-
glass contact. Hardware is
corrosion-resistant. Standard
finish is dark bronze (DDB)
corrosion-resistant polyester
powder. Additional architec-
tural colors available; see
www.lithonia.com/archcolors.
Optics
Computer-designed,
precision-formed reflector
for high performance and ef-
ficiency. Premium one-piece
silicone gasket seals optical
chamber to inhibit entrance
of outside contaminants.
Electrical
Electrical components
mounted to cast aluminum
housing, promoting
maximum heat dissipation.
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. Super CWA
Pulse Start ballasts, 88%
efficient and EISA legislation
compliant, are required for
151-400W (must order SCWA
option) for U.S. shipments
only. CSA, NOM or INTL
required for probe start ship-
ments outside the U.S..
Socket: Porcelain, horizontally
oriented, mogul-base (HFR)
or medium-base (HFM) socket
with copper alloy, nickel-
plated screw shell and center
contact. UL Listed 1500W,
600V, 4KV pulse rated.
Installation
Corrosion-resistant, heavy-
duty, painted steel mount-
ing yoke. Three-quarter-inch
female threaded conduit
hub provided.
Listings
UL Listed (standard). CSA
Certified (see Options). UL
Listed, Class 1, Division 2,
Groups A, B, C and D for haz-
ardous locations. UL Listed
for marine outside locations.
IP65 rated.
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: HFR 400S TA 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
AVAILABLE CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
HFR150S, 175M, 250S, 250M, 400S,
400MTA, RB, RC
HFM 100S, 150S RB, RG
TEMPERATURE CODES
SERIES LAMP TYPET-CODE OR
TEMP.MAX. INTERNAL
TEMP.HFR 250M T1 347°CHFR 400M T1 359°CHFR 150S T2B 238°CHFR 250S T1 332°CHFR 400S T1 376°CHFM 100S 280 280°CHFM 150S 350 341°C
W D
H
HFR HFM EPA: 1.3 ft2 (0.12 m2) 0.5 ft2 (0.05 m2) Width: 17-5/8 (44.8) 10-1/2 (26.9) Depth: 10-3/4 (32.4) 6-3/4 (17.5) Height: 10-7/8 (27.4) 18-1/2 (47.0) Weight: 20 lbs (9.0 kg) 35 lbs (15.8 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Specify lamp type and distribution. See Configurations table.
2 Not available with SCWA.
3 Not available with HFM SCWA.
4 Consult factory for availability in Canada.
5 Not available in Canada.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
HFRHFM
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com570
General PurposeFL
OO
DLI
GH
TIN
G
TFAContour®
Intended Use
For industrial yards, parking
lots, construction sites,
streets and recreational areas.
Construction
Housing: Heavy-duty
construction. Contoured die-
cast aluminum housing and
front bezel. Bezel hinged and
latched for fast, easy tool-
less internal access to optical
and electrical compartments.
Lens is heavy-duty, thermal-
and shock-resistant, clear,
tempered glass with no
metal-to-glass contact.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Computer-designed, preci-
sion die-formed, specular
anodized aluminum reflector
provides high efficiencies.
Premium, one-piece silicone
gasket seals optical chamber
to inhibit entrance of outside
contaminants.
Electrical
Electrical components
mounted to heavy-gauge
plate to maximize heat
dissipation and structural
integrity. Ballast: All ballasts
are 100% factory tested.
Constant wattage autotrans-
former 250W and above.
Super CWA Pulse Start bal-
lasts, 88% efficient and EISA
legislation compliant, are
required for 250-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Porcelain, horizon-
tally or vertically oriented,
mogul-base socket with cop
per alloy, nickel-plated screw
shell and center contact. UL
Listed 1500W, 600V.
Installation
Tool-less latches on front
bezel can be opened while
wearing gloves. Corrosion-
resistant, painted steel yoke.
Listings
UL Listed (standard) (ambi-
ent temperature 25°C for
750W and above, 40°C for
400W and below). CSA Certi-
fied or NOM Certified (see
Options). UL Listed for wet
locations. IP65 rated.
Series Lamp type1 Distribution1 Voltage Ballast Mounting
TFA High pressure sodium2
250S
400S
750S3
1000S
Metal halide
250M
320M4
350M4
400M
750M4
1000M
RN Horizontal
TA Horizontal
RB Vertical
RC Vertical
RE Vertical
RM Vertical
TA2 Vertical
120
2085
2405
277
347
4805
TB6
23050HZ7
(blank) Magnetic ballast
CWI Constant wattage isolated7
SCWA Super CWA ballast
Ships installed
(blank) Yoke (std.)
IS Integral slipfitter (2-3/8" OD tenon)
Ships separately8, 9
AFTM Tenon mount
FRWB Radius wall bracket
FSPB Steel square pole bracket
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit10
QRS Quartz restrike system10
QRSTD Quartz restrike time delay10
PER NEMA twist-lock receptacle only11
C22 2' 12-3 cord prewired12
C42 2' 14-3 cord prewired12
C62 2' 16-3 cord prewired12
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately8
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
VG Vandal guard13
WG Wire guard13
FV Full visor9, 13
UV Upper visor9, 13
BV Bottom visor9, 13
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFA 1000M TA TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION
TFA 250S, 250M, 320M, 350M, 400S, 400M RN, TA, RB, RC, TA2, RMTFA 750M RN, TATFA 750S, 1000S RN, TA, RB, TA2, RMTFA 1000M RN, TA, RB, RE, TA2, RM
Notes1 Specify lamp type and distribution. See Configurations table.
2 Not available with SCWA.
3 Not available in multi-tap ballast.
4 Must be ordered with SCWA.
5 Must specify CWI for use in Canada.
6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
7 Consult factory for available wattages.
8 May be ordered as an accessory.
9 Must specify finish.
10 Maximum allowable wattage lamp included.
11 Photocell not included.
12 Yoke-mount only.
13 Prefix with fixture name (e.g., TFAUV).
LAMP/FIXTURE DATALAMP TYPE
DIST. CIRCUIT LAMP
SHAPEBEAM SPREAD
H° x V°NEMA DIST.
400S TA CWA ET18 140 x 134 7 x 7400S RN CWA ET18 127 x 30 6 x 3400S TA2 CWA ET18 138 x 112 7 x 6400S RB CWA ET18 126 x 106 6 x 6
1000S TA CWA E25 139 x 133 7 x 71000S RN CWA E25 127 x 21 6 x 21000S TA2 CWA E25 144 x 119 7 x 61000S RB CWA E25 128 x 114 6 x 6400M TA CWA BT37 143 x 133 7 x 7400M RN CWA BT37 129 x 35 6 x 3400M TA2 CWA BT37 135 x 111 7 x 6400M RB CWA BT37 124 x 100 6 x 6
1000M TA CWA BT56 146 x 135 7 x 71000M RN CWA BT56 130 x 45 6 x 31000M TA2 CWA BT56 144 x 119 7 x 61000M RB CWA BT56 126 x 109 6 x 6 9-3/4
(24.8)
22-1/2(57.2)
22(55.9)
EPA: 2.6 ft2 (0.24 m2)Max. weight: 65 lbs (29.5 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
571www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GGeneral Purpose
Series Lamp type Distribution Voltage Ballast Mounting
TFL High pressure sodium1
70S
100S
150S
200S
250S
400S
Metal halide
150M
175M2
200M3
250M
320M3
350M3, 4
400M4
Metal halide ceramic5
150MHC
RA2 Rectangular beam
TA2 Vertical (max 250W)
120
2086
2406
277
347
4806
TB7
23050HZ8
(blank) Magnetic ballast
CWI Constant wattage isolated8
SCWA Super CWA ballast
Ships installed
(blank) Yoke (std.)
IS Integral slipfitter (2-3/8" OD tenon)
Ships separately9, 10
AFTM Tenon mount11
FRWB Radius wall bracket11
FSPB Steel square pole bracket11
FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)12
FCRA Crossarm adaptor12
FCRA45 Crossarm adaptor (45 degrees from horizontal)12
FPMB Wall/pole mounting bracket12
FSAB Steel angle bracket12
FCX2 2-Light wood pole crossarm12
FCX3 3-Light wood pole crossarm12
FCX4 4-Light wood pole crossarm12
FWPB Wall/wood pole/pipe bracket12
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit13
QRS Quartz restrike system13
PER NEMA twist-lock receptacle only14
C22 2' 12-3 cord prewired15
C42 2' 14-3 cord prewired15
C62 2' 16-3 cord prewired15
CF Charcoal filter
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately9
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
VG Vandal guard16
WG Wire guard16
FV Full visor10, 16
UV Upper visor10, 16
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
TFLContour®
Intended Use
For recreation areas, parking
lots, building facades and
car lots.
Construction
Housing: Compact, soft-
corner, die-cast aluminum
housing and front cover.
Front bezel is fully sealed
with one-piece, bonded
silicone gasket. Lens is
thermal- and shock-resistant,
clear, tempered glass.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
TA2: vertical lamp with one-
piece, hydro-formed, anodized
aluminum reflector. Two-
position adjustable socket.
RA2: Horizontal lamp with
anodized specular aluminum
reflector. Both have sealed op-
tic chamber to inhibit entrance
of outside contaminants.
Electrical
Components mounted to
cast-aluminum housing for
maximum heat-dissipation.
Ballast: All ballasts are 100%
factory tested. High reac-
tance, high power factor for
150W and below. Constant
wattage autotransformer
175W and above. MH: 150W
and below are standard with
pulse-start ignitor technol-
ogy. Super CWA Pulse Start
ballasts, 88% efficient and
EISA legislation compliant,
are required for 151-400W
(must order SCWA option)
for U.S. shipments only.
CSA, NOM or INTL required
for probe start shipments
outside the U.S.
Socket: Porcelain, verti-
cally or horizontally oriented
mogul-base socket with
copper alloy, nickel-plated
screw shell and center con-
tact. UL Listed 1500W, 600V,
4KV pulse rated.
Installation
Corrosion-resistant, heavy-
duty, painted steel yoke.
External screws treated for
corrosion resistance. Above-
horizontal aiming standard.
Listings
UL Listed (standard) (ambi-
ent temperature 25°C for
320W and above and 200S,
40°C for 250W and below).
CSA Certified or NOM Certi-
fied (see Options). UL Listed
for wet locations. IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFL 400S RA2 TB LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Notes1 Not available with SCWA.
2 Universal mogul base lamp allows TFL to be available with SCWA.
3 Must be ordered with SCWA.
4 Requires T-15, ED or BT28 reduced jacket lamp.
5 Not applicable with L/LP.
6 Must specify CWI for use in Canada.
7 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
8 Consult factory for available wattages.
9 May be ordered as accessory.
10 Must specify finish.
11 For use with slipfitter.
12 For use with yoke.
13 Maximum allowable wattage lamp included.
14 Photocell not included.
15 Yoke mount only.
16 May be ordered as accessory. Prefix with fixture name (ie TFLUV).
LAMP/FIXTURE DATALAMP TYPE
DIST. CIRCUITLAMP
SHAPEBEAM SPREAD
H° x V°NEMA DIST.
100S TA2 HX-HPF E17 148 x 123 7 x 6150S TA2 HX-HPF E17 155 x 119 7 x 6250S RA2 CWA BT28 143 x 111 7 x 6400S RA2 CWA BT28 143 x 111 7 x 6175M TA2 CWA BT28 147 x 122 7 x 6250M RA2 CWA BT28 140 x 104 7 x 6400M RA2 CWA BT28 145 x 100 7 x 6
EPA: 1.3 ft2 (0.12 m2)Weight: 27 lbs (11.8 kg)
15-3/4 (40.0)
6-1/8 (15.6)
16-1/8 (40.9)
6(15.2)
2(5.1)
1-1/4(3.2)
1-1/4(3.2)
5/8(1.6)
1/2(1.3)
1/2(1.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com572
General PurposeFL
OO
DLI
GH
TIN
G
Notes1 Not available with SCWA.
2 Universal mogul base lamp allows TFL to be available with SCWA.
3 Must be ordered with SCWA.
4 Not applicable with L/LP.
5 Not available with 150S.
6 Must specify CWI for use in Canada.
7 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
8 Consult factory for available wattage.
9 May be ordered as accessory.
10 Must specify finish.
11 Requires IS or FTS slipfitter.
12 Yoke mounting only.
13 Prefix with fixture name (e.g., TFREY) when ordered as accessory.
14 Maximum allowable wattage lamp included.
15 Photocell not included.
Series Lamp type Distribution Voltage Ballast Mounting
TFR High pressure sodium1
150S
250S
400S
Metal halide
150M
175M2
200M3
250M
320M3
350M3
400M
Metal halide ceramic
150MHC4
RB Horizontal
RC Horizontal
TA Horizontal5
120
2086
2406
277
347
4806
TB7
23050HZ8
(blank) Magnetic ballast
CWI Constant wattage isolated8
SCWA Super CWA ballast
Ships installed
(blank) Yoke (std.)
IS Integral slipfitter (2-3/8" OD tenon)
Ships separately9, 10
AFTM Tenon mount11
FRWB Radius wall bracket11
FSPB Steel square pole bracket11
FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)12
EY Extended yoke12, 13
FWPB Wall/wood pole/pipe bracket12
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
EC Emergency circuit14
QRS Quartz restrike system14
PER NEMA twist-lock receptacle only15
C22 2' 12-3 cord prewired12
C42 2' 14-3 cord prewired12
C62 2' 16-3 cord prewired12
CF Charcoal filter
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately9
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
VG Vandal guard13
WG Wire guard13
FV Full visor10, 13
UV Upper visor10, 13
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
TFRContour®
Intended Use
For recreation areas, parking
lots, building facades and
car lots.
Construction
Housing: Compact, soft
corner, die-cast aluminum
housing and front cover.
Front bezel is removable via
position-oriented hinge-cam
design and is fully sealed
with one-piece, bonded
silicone gasket. Lens is
thermal- and shock-resistant
clear, tempered glass.
Finish: Dark bronze polyester
powder f inish standard.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Die-formed, anodized
aluminum reflectors
provide rectangular, uniform
distributions. Three available
beam distributions for
maximum flexibility in area
lighting applications.
Electrical
Components mounted to
cast-aluminum housing,
promoting maximum heat
dissipation. Ballast: High
reactance, high power factor
for 150W. Constant wattage
autotransformer 175W and
above. MH: 150W and below
are standard with pulse-start
ignitor technology. Super
CWA Pulse Start ballasts,
88% efficient and EISA
legislation compliant, are
required for 151-400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket - Porcelain (medium
base: 150M; mogul base: all
others), horizontally oriented
with copper alloy, nickel
plated screw shell and center
contact. UL Listed 1500W,
600V, 4KV pulse rated.
Installation
Corrosion-resistant,
heavy-duty, painted steel
mounting yoke. External
screws treated for corrosion
resistance. Above-horizontal
aiming standard.
Listings
UL Listed (standard) (ambi-
ent temperature 25°C for
320W and above, 40°C for
250W and below). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations. IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFR 400M TA TB SCWA LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
6(15.2)
2(5.1)
1-1/4(3.2)
1-1/4(3.2)
5/8(1.6)
1/2(1.3)
1/2(1.3)
LAMP/FIXTURE DATALAMP TYPE
DIST. CIRCUIT LAMP
SHAPEBEAM SPREAD
H° x V°NEMA DIST.
150S RB XHP E17 114 x 107 6 x 6150S RC XHP E17 100 x 92 5 x 5250S TA CWA ET18 132 x 118 7 x 6250S RB CWA ET18 110 x 104 6 x 6250S RC CWA ET18 99 x 97 5 x 5400S TA CWA ET18 132 x 118 7 x 6400S RB CWA ET18 110 x 104 6 x 6400S RC CWA ET18 99 x 97 5 x 5175M TA CWA BT28 132 x 111 7 x 6175M RB CWA BT28 121 x 91 6 x 5175M RC CWA BT28 100 x 90 5 x 5250M TA CWA BT28 132 x 111 7 x 6250M RB CWA BT28 121 x 91 6 x 5250M RC CWA BT28 100 x 90 5 x 5400M TA CWA BT37 138 x 119 7 x 6400M RB CWA BT37 124 x 107 6 x 6400M RC CWA BT37 96 x 100 5 x 5
17-5/8(44.8)
12-3/4(32.4)
10-3/4(27.3)
EPA: 1.3 ft2 (0.12 m2)Weight: 29 lbs (13.2 kg)
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
573www.lithonia.com | 1-800-279-8041PSG10
LAMP/FIXTURE DATALAMP TYPE
DISTRIBUTION CIRCUITLAMP
SHAPEBEAM SPREAD
H° x V°NEMA DIST.
70S RB RNP or XHP E17 94 x 104 5 x 670S RG RNP or XHP E17 42 x 35 3 x 370S TA RNP or XHP E17 131 x 103 7 x 6
150S RB RNP or XHP E17 88 x 95 5 x 5150S RG RNP or XHP E17 57 x 65 4 x 4150S TA RNP or XHP E17 131 x 103 7 x 6100M RB XHP E17 83 x 108 5 x 6100M RG XHP E17 58 x 60 4 x 4100M TA XHP E17 128 x 107 6 x 6175M RB CWA ED17 97 x 105 5 x 6175M RG CWA ED17 42 x 35 4 x 426DTT RB electronic, HPF T4 125 x 132 6 x 642TRT RB electronic, HPF T4 120 x 122 6 x 6
FLOO
DLIG
HTIN
GGeneral Purpose
Series Lamp type Distribution Voltage Ballast Mounting
TFM High pressure sodium1
35S2
50S
70S
100S
150S
Metal halide
50M1, 3
70M1, 3
100M1
150M
175M4, 5
Metal halide ceramic6
50MHC1, 3
70MHC1, 3
100MHC1
150MHC
Compact fluorescent5
13DTT
18DTT
26DTT
32TRT
42 TRT
RB Horizontal
RG Horizontal
TA Vertical7
120
2088
2408
277
347
4808
TB9
MVOLT10
23050HZ11
(blank) Magnetic ballast
CWI Constant wattage isolated11
SCWA Super CWA ballast
XHP High reactance (lag), high power factor12
Ships installed
(blank) 1/2" threaded knuckle (std.)
YK Yoke mount
Ships separately13, 14
AFTM Tenon mount
TFMTS Tenon slipfitter
Options Finish Lamped
Ships installed
SF Single fuse, 120V, 277V, 347V5
DF Double fuse, 208V, 240V, 480V5
GMF Internal slow-blow fusing5
PE Photoelectric cell, button type15
C22 2' 12-3 cord prewired16
C42 2' 14-3 cord prewired16
C62 2' 16-3 cord prewired16
CSA Meets Canadian standards
NOM Meets Mexican standards (Consult factory)
INTL International shipment for 175M probe start
Ships separately17
VG Vandal guard
WG Wire guard
FV Full visor14
UV Upper visor14
(blank) Dark bronze
DBL Black
DGC Charcoal gray
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
LPI Lamp included
L/LP Less lamp
TFMContour®
Intended Use
For signs, flags, building
facades and landscaping.
Construction
Housing: Compact, heavy-
duty construction. Die-cast
aluminum housing and
removable front bezel. Lens is
thermal- and shock-resistant,
clear, tempered glass.
Standard finish is dark
bronze (DDB) corrosion-
resistant polyester powder.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Hydroformed, anodized
aluminum, faceted parabolic
(RB, RG) or die-formed (TA)
construction provides high
efficiencies.
Electrical
Ballast: All ballasts are 100%
factory tested. HPS: 120V is
reactor normal-power factor
standard (XHP available).
208V, 240V, 347V, 480V,
and TB are high reactance,
high power factor standard.
MH: High reactance high
power factor for 150W and
below. Constant wattage
autotransformer for 175M.
150W and below are standard
with pulse-start ignitor
technology. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
for 175M. Not available 175M
SCWA. Compact fluorescent
uses an electronic high-
frequency ballast.
Socket: Porcelain, medium-
base, horizontally-oriented
(RB, RG) or vertically-orient-
ed (TA) socket with copper al-
loy, nickel-plated screw shell
and center contact. UL Listed
1500W, 600V. 4-pin socket
for compact fluorescent. LPI
is standard 35K for CFL.
Installation
Die-cast aluminum 1/2 "
NSPM threaded mounting
knuckle is standard.
Corrosion-resistant, painted
steel yoke optional. Above-
horizontal aiming standard.
External screws treated for
corrosion resistance.
Listings
UL Listed (standard) (ambient
temperature 25°C for 150M
and above; 40°C for 100M and
below, 150S and below). CSA
Certified or NOM Certified
(see Options). UL Listed for
wet locations. IP65 rated.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFM 100M RB 120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
10-1/2(26.7)
10-5/8(26.6)
EPA: 0.5 ft2 (0.05 m2) Weight: 15 lbs (6.8 kg)
6-7/8(17.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 120V only, n/a XHP.
3 Not available with 480V.
4 Not available with SCWA. Requires CSA, NOM, or INTL.
5 Not available with TA distribution.
6 Not applicable with L/LP.
7 TA distribution not available with 175M, compact fluorescent lamps or fusing.
8 Must specify CWI for use in Canada.
9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
10 Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.
11 Consult factory for available wattages.
12 Available for 120V only. Standard for 208V, 240V, 277V, 347V and TB. HPS only.
13 May be ordered as accessory.
14 Must specify finish.
15 Must be ordered with fixture; cannot be field installed. Not available 347, 480, or TB.
16 Yoke mounting only.
17 Prefix with fixture name (e.g., TFMUV) when ordered as accessory.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com574
SportslighterFL
OO
DLI
GH
TIN
G
TSPTru-Sport®
Intended Use
For stadiums, fields, arenas,
tracks or courts.
Construction
Housing: Two-piece, die-cast
aluminum ballast housing
mounted to steel trunnion.
Removable ballast is hinged
with captive fastener. Steel
trunnion features both verti-
cal and horizontal aiming
scale with vertical reposition-
ing stop. Standard finish
is white (DWH) corrosion-
resistant polyester powder.
Additional architectural
colors available; see
www.lithonia.com/archcolors.
Optics
Heavy-gauge anodized re-
flector with five distributions
available. Transverse mount-
ing of lamp. Lamp support
included. Optical chamber is
sealed to inhibit entrance of
contaminants. Heavy-duty
hinged lens is thermal-re-
sistant, shock-resistant and
impact-resistant tempered
glass. Lens frame is secured
by spring clips for servicing
of lamp. "Flux manager"
(NFX, WFX, MFX) available
for optimal glare and spill
light control. Choice of gen-
eral purpose or heavy-duty
(shrouded) reflectors.
Electrical
All electrical components
are thermally isolated from
optical assembly, promoting
longer life. All bal-
lasts are 100% factory
tested. Constant wattage
autotransformer 400W and
above. Super CWA Pulse Start
ballast, 88% efficient and
EISA legislation compliant,
is required for 400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Die-cast socket hous-
ing. Porcelain, mogul-base
socket with copper alloy,
nickel-plated screw shell and
spring-loaded center contact.
UL Listed 1500W-600V, 4KV
pulse rated.
Installation
Fixture is mounted by secur-
ing trunnion directly to cros-
sarm. Mounting hardware is
provided. Below horizontal
aiming only. All external
hardware is treated for corro-
sion resistance.
Listings
UL Listed (standard). CSA Certi-
fied (see Options). UL Listed for
25°C ambient and wet loca-
tions. US Patent No. 6,190,023.
Canadian Patent No. 2,212,014.
Other patents pending.
Wattage Lamp type Distribution Voltage Ballast Mounting
TSP 400M
1000M
1500M1
General purpose
GP24N
GP24NFX
GP24M
GP24MFX
GP24W
GP24WFX
Heavy duty2
HD24N
HD24NFX
HD24M
HD24MFX
HD24W
HD24WFX
120
2083
2403
277
347
4803
TB4
23050HZ5
(blank) Magnetic ballast
CWI Constant wattage isolated5
SCWA Super CWA ballast
Ships installed
(blank) Yoke (std.)
Ships separately6
FRWB Radius wall bracket
FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)
FCRA Crossarm adaptor
FCRA45 Crossarm adaptor (45° from horizontal)
FPMB Wall/pole mounting bracket
FSAB Steel angle bracket
FCX2 2-Light wood pole crossarm
FCX3 3-Light wood pole crossarm
FCX4 4-Light wood pole crossarm
Options Finish
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
QRS Quartz restrike system7
C22 2' 12-3 cord prewired
C42 2' 14-3 cord prewired
C62 2' 16-3 cord prewired
CV3P 3' of 16-3 cord prewired with 3-prong plug for use with prewired cages8
CF Charcoal filter9
SLR Stainless steel lens ring
WC Mounting bolt for wooden crossarm
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
(blank) White (std.)
DDB Dark bronze
DBL Black
DMB Medium bronze
DNA Natural aluminum
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TSP 1500M GP24N TB
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
20(50.8)
24-1/2(62.2)
EPA: 3.3 ft2 (0.91m2)Max weight: 55 lbs (24.9 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 Heavy-duty anodized aluminum shroud painted to match fixture.
3 Must specify CWI for use in Canada.
4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
5 Consult factory for available wattages.
6 May be ordered as an accessory. Must specify finish.
7 Maximum allowable wattage lamp included.
8 Must use mating receptacle, provided by others (N/A 1500M 120V).
9 HD option must be ordered.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
575www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GSportslighter
Series Lamp type Distribution Voltage Ballast Mounting
TV High pressure sodium1
400S
1000S
Metal halide
400M
1000M
1500M1
General purpose
GP22
GP32
GP4
GP5
GP6
Heavy duty3
HD2
HD3
HD4
HD5
HD6
120
2084
2404
277
347
4804
TB5
23050HZ6
Ships installed
(blank) Magnetic ballast
CWI Constant wattage isolated6
SCWA Super CWA ballast
Ships separately6, 7
HRBW HID remote ballast weatherproof (black)
HRB HID remote ballast (white)
Ships separately7, 8
FRWB Radius wall bracket9
TVTS Tenon slipfitter
FSAB Steel angle bracket
FCX2 2-Light wood pole crossarm
FCX3 3-Light wood pole crossarm
FCX4 4-Light wood pole crossarm
Options Finish
Ships installed
SF Single fuse, 120V, 277V, 347V
DF Double fuse, 208V, 240V, 480V
QRS Quartz restrike system10
PER NEMA twist-lock receptacle only11
C22 2' 12-3 cord prewired
C42 2' 14-3 cord prewired
C62 2' 16-3 cord prewired
CV3P 3' of 16-3 cord prewired with 3-prong plug for use with prewired cages12
CF Charcoal filter13
SLR Stainless steel lens ring
WC Mounting bolt for wooden crossarm
LS Lamp support
AH Above horizontal aiming
IBL Internal bottom louver
CSA Meets Canadian standards
NOM Meets Mexican standards (consult factory)
INTL Available for MH probe start shipping outside the U.S.
Ships separately7
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shorting cap
UV Upper visor8
(blank) Dark bronze (std.)
DBL Black
DMB Medium bronze
DNA Natural aluminum
DWH White
CR Enhanced corrosion resistance
CRT Non-stick protective coating (black)
TVIntended Use
Ideal for recreational or com-
petitive sports fields, parking
areas and industrial yards.
Construction
Housing: Heavy-gauge,
hydroformed aluminum
ballast housing mounted to
integral die-cast monoframe
with horizontal degree aim-
ing scale and repositioning
locator. Die-cast aluminum
socket housing provides
vertical aiming adjustment
with degree aiming scale and
repositioning stop.
Finish: Standard finish is dark
bronze polyester powder. Ad-
ditional architectural colors
available; see
www.lithonia.com/archcolors.
Optics
Heavy-gauge anodized
aluminum reflectors provide
a range of NEMA beam
spreads. Optical chamber
sealed to inhibit entrance of
contaminants. Hinged lens
is heavy-duty, thermal-,
shock- and impact-resistant
tempered glass.
Electrical
All electrical components
are thermally isolated from
optical assembly, promoting
longer life. All bal-
lasts are 100% factory
tested. Constant wattage
autotransformer 400W and
above. Super CWA Pulse Start
ballast, 88% efficient and
EISA legislation compliant,
is required for 400W (must
order SCWA option) for U.S.
shipments only. CSA, NOM or
INTL required for probe start
shipments outside the U.S.
Socket: Porcelain, mogul-
base socket with copper
alloy, nickel-plated screw
shell and center contact. UL
Listed 1500W, 600V.
Installation
Mounted by securing integral
cross arm mounting bracket
directly to cross arm. No
additional adaptors are
required. A 5/8" 11UNC
mounting bolt provided.
Exposed bolt length: 1-1/2".
Listings
UL Listed (standard). CSA
Certified or NOM Certified
(see Options). UL Listed
for 25°C ambient and wet
locations.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TV 1000M GP4 TB
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Heavy-Duty Shroud (HD)
General Purpose Reflector (GP)
G O D A W G S
L
D
NEMA 2, 3 NEMA 4, 5, 6
EPA: 2.9 ft2 (0.27m2) 2.5 ft2 (0.23 m2)Diameter: 23-1/8 (58.7) 21-1/2 (54.6)
Length: 30 (76.2) 31-1/2 (80.0)Weight: 53 lbs (24.0 kg) 53 lbs (24.0 kg)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with SCWA.
2 Not available with 1000S.
3 Heavy-duty anodized aluminum shroud painted to match fixture.
4 Must specify CWI for use in Canada.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.
6 Consult factory for available wattages.
7 May be ordered as an accessory.
8 Must specify finish.
9 For use with slipfitter.
10 Maximum allowable wattage lamp included.
11 Photocell not included. Not available 1500M.
12 Must use mating receptacle, provided by others (n/a 1500M 120V).
13 HD option must be ordered.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com576
Contractor Select StockFL
OO
DLI
GH
TIN
G
Intended Use
Floodlight for commercial
or residential signs, entry
monuments or facades.
HID, quartz, and compact
fluorescent sources.
Construction
Rugged, die-cast aluminum
housing is ribbed for maxi-
mum heat dissipation. Die-
cast aluminum doorframes.
F500QL lens attaches with
clips. FP is polycarbonate.
Finish is dark
Optics
Anodized aluminum reflec-
tors with high efficiency and
wide beam spread. F150MSL
features a spot distribution.
Electrical
120 volt reactor, normal
power factor for 50-150 HPS
and 70-100MH. Quad tap,
high reactance, high power
factor for 150M. Medium
base socket.
Quad tap, super CWA for 250M
and 400M. Mogul-base socket.
120V for 13W (for CFL) or
500W (for quartz). Lamps
included. 13W compact fluo-
rescent lamp is a twin-tube.
Double-ended 1500W
voltage determined by lamp
(not included).
Installation
Floodlights feature adjust-
able mounting knuckle with
1/2" NPS threaded stem.
Mounts to standard outlet
boxes. Medium floods (250M
and 400M) are yoke mount.
Listings
Listed and labeled to UL
standards for wet locations.
Listed and labeled to CSA
standards. 25°C maximum
ambient temperature. Fix-
tures are covered by Lithonia
Lighting 12-month warranty
against mechanical defects
in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE FINISH LAMP INCLUDEDAPPROX.
WEIGHT (LBS)STANDARD
CARTON QTY.F50SL 120 M6 Micro floodlight 50S HPS 120 Dark bronze Y 7 6F70SL 120 M6 Micro floodlight 70S HPS 120 Dark bronze Y 7 6
F100SL 120 M6 Micro floodlight 100S HPS 120 Dark bronze Y 7 6F150SL 120 M6 Micro floodlight 150S HPS 120 Dark bronze Y 7 6F70ML 120 M6 Micro floodlight 70M MH 120 Dark bronze Y 7 6
F100ML 120 M6 Micro floodlight 100M MH 120 Dark bronze Y 7 6F150ML M4 Small floodlight 150M MH 120/208/240/277 Dark bronze Y 14 4
F150MSL M4 Spot, small floodlight 150M MH 120/208/240/277 Dark bronze Y 14 4F250ML SCWA Medium floodlight 250M MH 120/208/240/277 Dark bronze Y 29 1F400ML SCWA Medium floodlight 400M MH 120/208/240/277 Dark bronze Y 29 1F13L 120 M12 Cast-glass floodlight 13 CFL 120 Dark bronze Y 6 12
F213L 120 M12 Cast-glass floodlight 13 CFL 120 Dark bronze Y 6 12FP213L 120 M12 Polycarbonate floodlight 13 CFL 120 Dark bronze Y 2 12F500QL 120 M12 Cast-glass floodlight 500Q Quartz 120 Dark bronze Y 3 12
F500QLD 120 M12 Cast-glass floodlight 500Q Quartz 120 Dark bronze Y 3 12F1500QD M6 Cast-glass floodlight 1500Q Quartz -- Dark bronze N 6 6
6-1/2(16.5)
8-7/8(22.5)
6-1/8(15.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Micro16-1/2(41.9)
7(17.8)
17-1/2(43.5)
Medium
13(33.0)
7-1/8(18.1)
9(22.9)
9(22.9)
Small
8-1/2(21.6)
4-1/2(11.4)
4-1/8(10.5)
FP213L
8-7/8(22.5)
6-1/2(16.5)
3-1/2(8.9)
F500
13(33.0)
8-1/4(21.0)
6(15.2)
F1500QD
FLOODLIGHTS
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
F50-150
FP213L
F13L/F213LF500
F250-400
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
577www.lithonia.com | 1-800-279-8041PSG10
FLOO
DLIG
HTIN
GContractor Select Stock
WORKLIGHTSIntended Use
Temporary work light for
residential or commercial ap-
plications. Portable unit uses
one 500W quartz lamp; tripod
unit uses two 500W quarts
lamps. Lamp(s) included.
Construction
Rugged, die-cast aluminum
housing is ribbed for
maximum heat dissipation.
Die-cast aluminum door-
frame. Tempered glass lens.
Yellow finish.
Installation
Protective wire guard.
Adjustable stand for tripod
configuration. 5' cord set with
grounded plug for portable
unit; 7' for tripod unit. Pad-
ded, insulated handlebar.
Listings
UL Listed to U.S. and Canadi-
an safety standards. UL/C-UL
Listed for wet locations.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE LAMP INCLUDED APPROX.WEIGHT (LBS) STANDARD CARTON QUANTITYF500QPL M6 Portable worklight 500 Quartz 120 Y 4 6
F2/500QTL M2 Tripod stand worklight 500 Quartz 120 Y 11 2
8-1/4(21.0)
10-7/8(27.6)
12-1/4(31.1)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
F500QPL 61(154.9)
22-7/8(58.1)
9(22.9)
F2/500QTL
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
F2/500QTL
F500QPL
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com578
Contractor Select StockFL
OO
DLI
GH
TIN
G
LANDSCAPE FLOODLIGHTING
Intended Use
Ideal for commercial or
residential landscape, sign or
facade applications.
Construction
Rugged, die-cast aluminum
housing. Landscape post is
constructed of heavy-wall
extruded aluminum.
Electrical
Fixtures are 120V incandescent
only. Lamp is not included.
Installation
Adjustable mounting
knuckle with 1/2" NPS
threaded stem. Mounting
post provides a stable plat-
form for ease of installation.
Listings
Listed and labeled to UL stan-
dards for wet locations. Listed
and labeled to CSA standards.
Fixtures are covered by
Lithonia Lighting 12-month
warranty against mechanical
defects in manufacture.
ORDERING INFORMATION
CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE FINISH LAMP INCLUDEDAPPROX.
WEIGHT (LBS)STANDARD
CARTON QTY.
FB50I M12 PAR20 bullet flood 50 Incandescent 120 Black N 1 12
FB50IG M12 PAR20 bullet flood 50 Incandescent 120 Green N 1 12
FB50IW M12 PAR20 bullet flood 50 Incandescent 120 White N 1 12
FB75I M12 PAR30 bullet flood 75 Incandescent 120 Black N 1 12
FB75IG M12 PAR30 bullet flood 75 Incandescent 120 Green N 1 12
FB75IW M12 PAR30 bullet flood 75 Incandescent 120 White N 1 12
FB150I M12 PAR38 bullet flood 150 Incandescent 120 Black N 2 12
FB150IG M12 PAR38 bullet flood 150 Incandescent 120 Green N 2 12
FB150IW M12 PAR38 bullet flood 150 Incandescent 120 White N 2 12
LT60I M12 Tiered pagoda 60 Incandescent 120 Black N 1 12
LT60IG M12 Tiered pagoda 60 Incandescent 120 Green N 1 12
LT60IW M12 Tiered pagoda 60 Incandescent 120 White N 1 12
LFP M6 Landscape post -- -- -- Black -- 2 6
LFPG M6 Landscape post -- -- -- Green -- 2 6
LFPW M6 Landscape post -- -- -- White -- 2 6
6(15.2)
3-1/2(8.9)
3-1/2(8.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
FB50
7(17.8)
4-5/8(11.7)
4-5/8(11.7)
FB75
8-1/2(21.6)
5-1/2(14.0)
5-1/2(14.0)FB150
6(15.2)
11(27.9)
LT60I
17-1/4(43.8)
5-1/4(13.3)
LFP
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
579www.lithonia.com | 1-800-279-8041PSG10
OP
TION
S & ACCESSO
RIES
Area Lighting
HS – KAD
35-3/4(90.8)
KTMB
Tenon Slipfitters for Arm-Mounted Luminaires
Use with all arm-mounted luminaires. When ordered, fixture must include round pole arm (RPx ) or pole degree aiming arm
(DA12P or DAD12P). To order, locate catalog number from chart below based on tenon size and mounting configuration.
Example: For 3 fixtures at 120°, using a 2-7/8” tenon, catalog number is T25-320. Shipped separately. Order as separate
catalog numbers. For Aeris™ and OMERO™ fixture specify with prefix AS. Example: AS T20-190.
Notes1 Size one housing only.
2 Size two housing only.
3 Only available with FP option.
4 Only available in KVS1 (R2, R3 and R4).
5 Specify family as prefix when ordering as a separate line item.
For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog.
DA12P
6(15.2) 14
(35.5)
DAD12P
5-1/2(14.0)
10-5/8(26.9)
Slipfitter
Set
Tenon
RP09
Tenon 2 fixtures 2 fixtures 3 fixtures 3 fixtures 4 fixtures
OD 1 fixture at 180° at 90° at 120° at 190° at 90°
2-3/8” T20-190 T20-280 T20-290* T20-320* T20-390* T20-490*
2-7/8” T25-190 T25-280 T25-290* T25-320* T25-390* T25-490*
4” T35-190 T35-280 T35-290* T35-320 T35-390* T35-490*
* See product page for size restrictions.
SPx/RPx
VG–KAD
Wall bracket size:
5-1/2” x 7-1/4”
WBx
Mounting bolts (4) by others.
Minimum fastener size is 1/2” diameter.
WBA
NOMENCLATURE DESCRIPTION AS KSE KSF KAD KAC KVE KVR KVS KAR KVF MR MRP
DA12P Degree mounting arm. 30° max. uptilt in 5° increments. Single or twin 180° config. for KVS.
DA12WB Degree arm for wall. 30° max. uptilt in 5° increments. Single or twin 180° config. for KVS.
DAD12P Degree mounting arm. 30° max. uptilt, 5° increments.
DAD12WB Degree arm for wall. 30° max. uptilt, 5° increments.
EHS External house-side shield.
HS House-side shield (consult factory). (Ships separate for KVE R2, R3).
KMA Mast arm mounting for area lighting, 6” min. arm length. Use for 2-3/8" OD pipe. 1
KTMB Twin mounting bar square mounting arms. (EPA=1.1, wt.=41lbs) Mounts on T25 (2-7/8" OD tenon by 5” tall minimum).
MA Master arm for single/twin 180° configuration, internal fitter (Size 3 only).
PT4 Post-top (4” OD open-top pole).
PT45 Post-top (4-1/2” OD open-top pole).
PT5 Post-top (5” OD open-top pole).
PT6 Post-top. Must use with round pole only for KVR (6" OD open-top pole). 2 2
RPx Round pole mounting arm. (14" arm ships separate).
RPF20 Round pole fitter (2-3/8” OD tenon). 2
RPF25 Round pole fitter (2-7/8” OD tenon). 2
MRPF3 4" to 3" O.D. round open-top pole filter.
MRPF5 4" to 5" O.D. round open-top pole filter.
MRPT20 MRP round pole fitter (2-3/8" tenon).
MRPT25 MRP round pole fitter (2-7/8" tenon).
MRPT30 MRP round pole fitter (3-1/2" tenon).
MRPT35 MRP round pole fitter (4" tenon).
SPx Square pole mounting arm. (14" arm ships separate).
SPF20 Square pole fitter (2-3/8” OD tenon). 2
SPF25 Square pole fitter (2-7/8” OD tenon). 2
VG5 Vandal guard. 3 4
WBx Wall mount for J-box. (Aeris™ only order WBA.) (14" ships separate).
WWx Wall for conduit stub. (14" ships separate).
DC_ Deco curved arm.
KMA
HS – KSF
= Available as an option, shipped included = Available as an accessory, shipped separately AREA LIGHTING
EHS-KVF
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com580
Bollards & Wall MountedO
PTI
ON
S &
ACC
ESSO
RIE
S
NOMENCLATURE DESCRIPTION ASB ASW KBA KBC KBD KBE KBR KBS KL MRW MRBX TWH TWPTWA/
TWACTWR TWRC TWS WFL
WSR/
WST/
WSQ
BBF Backbox for flat surfaces.
BBR Backbox, recessed (ceiling, soffit mount).
BBW1 Backbox for surface wall installation.
FS Full shield for IES cutoff.
FCV Full cutoff visor.
PC Polycarbonate lens.
R6S/R8S Half-shield, not for use with louvered bollards.
S6S/S8S Half-shield, not for use with louvered bollards.
WG1 Wireguard.
VG1 Vandal guard.
UT5 Uptilt 5 degrees.
DFL Diffusing lens.
WLU Wet location door for up orientation.
IBS Internal backlight shield.
LC90 Lock at 90° for full cutoff.
UCSUplight component shield for WSR, inverted orientation with FTU or
WTU distribution.
HS House-side shield for SR2,SR3 or SR4W (size 2).
KL (Standard) KLBBF KLBBW
TWHWG TWPWGTWHVG TWAWG
Notes1 Specify family prefix.
TWRCFCV ASWHS
ASWxBBW
UT5 5
TOWALL
= Available as an option, shipped included = Available as an accessory, shipped separately
BOLLARDS & WALLMOUNTED LIGHTING
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
581www.lithonia.com | 1-800-279-8041PSG10
OP
TION
S & ACCESSO
RIES
Floodlighting, Garage & Sportslighting
NOM. DESCRIPTIONGARAGE SPORTS FLOODLIGHTING
PGR KPS KACM TSP TV ASF KFL 55 95 170S TFA TFR TFL TFM
HS House-side shield (glare shield).
BDS Bird-deterrent shroud.
OJB Offset junction box.
RMG Recessed mount in grid ceiling.
SS Stainless steel, ceiling-mount housing (alloy 304 stainless steel).
AH Above horizontal aiming.
CF Charcoal filter; must use with heavy-duty shroud.
FCRA1 Crossarm adapter for horizontal mounting (use with yoke mount only).
FCRA451 Crossarm adapter for horizontal mounting 45° (use with yoke mount only). 2
SLR Stainless steel lens rings.
IBL Internal bottom louver; cannot order IBL and TVUV together.
FRWB1 Radius wall bracket; 2-3/8 diameter (use with slipfitter mount only).
FSAB1 Steel angle bracket (use with yoke mount only).
FSPB1 Steel square pole bracket (for use with existing poles). 2-3/8” diameter (use with slipfitter mount only).
FPMB1 Pipe/wood/pole/wall mounting bracket. Mounts to 2” schedule 40 pipe (use with yoke mount only).
FWPB1 Wall bracket (pipe) (use with yoke mount or standard TV mount).
FTS1 Tenon slipfitter; fits 2-3/8” to 2-7/8” OD tenon (use with yoke mount only).
TVTS1 Tenon slipfitter; fits 2-3/8” to 2-7/8” OD tenon.
TFMTS1 Tenon slipfitter for 1/2” threaded knuckle; fits 1-1/4” to 2-3/8” OD tenon. For ground mount only.
TVUV Upper visor; cannot be used with IBL.
FCX21 2-light wood pole crossarm (use with yoke mount or standard TV mount).
FCX31 3-light wood pole crossarm (use with yoke mount or standard TV mount).
FCX41 4-light wood pole crossarm (use with yoke mount or standard TV mount).
YK Yoke mount, painted.
EY Extended yoke.
THK Threaded knuckle mount. (Size 1 only for ASF).
IS Integral slipfitter; fits 2-7/8” max. OD with TFA, 2-3/8” with TFL and TFR.
FRWB FSPB
FSAB
9/16”(1.4)
FWPB
4"(10.2)
1-1/4"(3.2)
4-1/2"(11.4)
FPMB
IS
7"
12"
13"
9/16" Dia.3-3/4"
7"
12"
13"
9/16" Dia.
7"
Notes1 Order as separate catalog number. Must specify finish.2 Ships standard with TSP. Order as separate catalog number for other families.
RMG
FCX2
EPA: 1.4 sq. ft.
Weight: 20 lbs.
EPA: 3.9 sq. ft.
Weight: 56 lbs.
EPA: 4.8 sq. ft.
Weight: 64 lbs.
TFMTS
Pivot slotfor 1/2" bolt
Degree markingsPivot hole for 5/8" bolt(not provided)
5/8" x 1" hex boltand lockwasherfurnished
Floodlightyoke
0000
00
00
00
00
00
4-3/4"(12.1)
1/2" x 1-1/2"hex bolt andflat washerfurnished
(2) 3/8" U-boltsfurnished withnuts andwashers
3-3/8"(8.6)
5/8" x 1" hex bolt andlockwasher furnished
8-3/4"(22.1)
4-1/4"(10.6)
Fits 2" or2-1/2" pipe(horizontalor vertical)
00 0000
Degreemarkings
Pivot hole for5/8" bolt
Pivot slot for 1/2" bolt (not provided)
5/8" x 1" hex bolt and lockwasher furnished
6"(15.2)
1-1/4"(3.2)
Fixtureyoke
4-1/2"(11.4)
(not provided)
FCRA45
4(10.2)
3-1/4(8.3)
4-7/8(12.4)
FTS
lockwasher andnut furnished
20-1/8"(51.1)
12-1/2"(31 .8)
4"(10.2)
11/for
36(91.4)
66(167.6)
96(243.8)
Front view
TFAFront view
TFL, TFR
FCX3
FCX4
5/8” clearance
hole
Furnished with weather-tight
cord grip for 14-3 SO cord (grip
for 12 3 SO optional).
Wire access
7/16” (1.1)
5/8” x 1-1/2” bolt,
lock-washer and nut
furnished
9/16” diameter
holes for lag bolts
(not provided)
11/16”
diameter
hole for 5/8"
thru-bolt
5/8" x 1-1/2" bolt,
lockwasher and nut
furnished
4-3/4” (12.1)
8-1/4” (21.0)
18-5/8”(47.3)3-1/8
2-3/8
1/2-14 NPT
5/16-18 NPT(3 places)
= Available as an option, shipped included = Available as an accessory, shipped separately
FCRA
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com582
FloodlightingO
PTI
ON
S &
ACC
ESSO
RIE
S
Notes1 Vandal guards are compatible with all wattages.
2 Specify family as prefix.
BD – Barn doors (KFL and ASF)BV – Bottom visor (KFL) BV – Bottom visor (55/95) FV – Full visor (KFL and ASF) FV – Full visor (55/95)
UV – Upper visor (170)VLV – Vertical louver (KFL) WG – Wireguard (KFL)TFMWG/TFRWGASFGS
TFLWG UV – Upper visor (55/95)TFAUV TFAFVTFAVGTFLFV TFLUV
TFMVG/TFRVG TFMUV/TFRUV TFLVG TFMFV/TFRFVTFAWG UV – Upper visor (KFL)
BVG – Vandal guard (KFL and ASF)HLV – Horizontal louver (KFL) CV – Concentric visor (95) GV – Glare visor (55/95)EV – Eggcrate visor (KFL and ASF)
NOMENCLATURE DESCRIPTION ASF KFL/WFL 55 95 170S TFA TFR TFL TFM
BD2 Barn doors
BV2 Bottom visor
BVG2 Bubble vandal guard
CV2 Concentric visor
EV2 Eggcrate visor (black finish)
FV2 Full visor
FV/BVG2 Full visor and bubble vandal guard
GS2 Glare shield (upper or bottom visor)
GV2 Glare visor
HLV2 Horizontal louver (black finish)
VG1, 2 Vandal guard
UV2 Upper visor
UV/BVG2 Upper visor and bubble vandal guard
VLV2 Vertical louver (black finish)
WG2 Wire guard
= Available as an accessory, shipped separately
FLOODLIGHTING
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
583www.lithonia.com | 1-800-279-8041PSG10
OP
TION
S & ACCESSO
RIES
Floodlighting
Notes1 When used with TFM yoke a 3/8” bolt, two lockwashers and nuts must be
furnished by others.
2 For use with TFMTS.
EWB – Extended wall bracket AFWMA – Wall mount for tenon slipfitter
mounting
AFWMATHK and KFLWMATHK – Wall-mount
arm for threaded knuckle
AFWMPTHK – Wall mounting plate for 3/4”
NPT threaded knuckle
AFTS – Tenon slipfitter for 3/4” NPT threaded
knuckle
AFTMBTHK and KFLTMBTHK – Twin mounting
bar for threaded knuckle
AFTMB – Twin mounting bar for tenon slipfit-
ter mounting
AFSTMTHK and KFLSTMTHK – Stanchion
mount for threaded knuckle
AFSTM – Stanchion mount for tenon slipfitter
mounting
2-3/8"
Wireaccesscover
8"8"
2-3/8" OD
21-5/8" OH
AFTM – Tenon base mount STM – Stanchion mount, general purpose
2-3/8" OD
21-1/2" OH
6" 6"
NOMENCLATURE DESCRIPTION ASF1 ASF2 KFL 55 95 170S TFA TFR TFL TFM
AJB Architectural J-box, accepts 1/2” NPT THK.
AFJB Architectural J-box, accepts ASF1 standard mounting (3/4” NPT THK).
EWB Extended wall bracket, yoke mount only.
AFTMB Twin mounting bar. Requires tenon slipfitter mounting (2-3/8” OD tenon).
AFTMBTHK Twin mounting bar, accepts ASF1 standard mounting (3/4” NPT THK).
KFLTMBTHK Twin mounting bar for THK option. Only compatible with KFLTHK (1/2” NPT).
AFSTM Stanchion mount. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2
AFSTMTHK Stanchion mount, accepts ASF1 standard mounting (3/4” NPT THK).
KFLSTMTHK Stanchion mount, accepts 1/2” NPT THK
AFTM Tenon-base mount. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2
AFWMA Wall-mount arm. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2
AFWMATHK Wall-mount arm, accepts ASF1 standard mounting (3/4” NPT THK).
KFLWMATHK Wall-mount arm, accepts 1/2" NPT THK
AFWMPTHK Wall-mount plate, accepts ASF1 standard mounting (3/4” NPT THK).
TS Tenon slipfitter. Fits 2-3/8” OD tenon (use with 2-1/2" wide yoke only).
AFTS Tenon slipfitter, accepts ASF1 standard mounting (3/4” NPT THK).
STM Stanchion mount – general purpose (2-3/8” OD tenon). 2
= Available as an accessory, shipped separately. Must specify finish.
AFJB and AJB – Architectural
junction box
FLOODLIGHTING
TS – Tenon Slipfilter
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com584
Nighttime Friendly LightingN
IGH
TTIM
E FR
IEN
DLY
LIG
HTI
NG
Traditional Forward
Throw Light Reflector
SR4SC - Forward Throw
Notes1 May not meet Nighttime Friendly™ standards with HS option.
2 Will not meet Nighttime Friendly™ standards with DL or EHS options.
AS
KAD
KSE
KVF
LUMINAIREMEETS NIGHTTIME
FRIENDLY™ CRITERIAFULL CUTOFF PSG PAGE COMMENTS
TRESPSS SOLUTIONS:
SHARP CUTOFF OPTICAL SYSTEM
AS 1 520 Aeris™ die-cast housing, dedicated optical platform, 2 housing sizes, flat lens, 400W max. SR4SC
AST 1 520Aeris™ die-cast housing, dedicated optical platform, aesthetically pleasing tension rod assembly,
2 housing sizes, flat lens, 400W max.SR4SC
KAD 534 Square die-cast housing, flat lens, 400W max. SR4SC
KADT 534 Square die-cast housing, aesthetically pleasing tension rod assembly, flat lens, 400W max. SR4SC
KSF 524 Rectangular housing, 3 housing sizes, flat lens, 1000W max. R4SC
KSE 526 Crisp square housing, 2 housing sizes, flat lens, 400W max. R4SC
KVF 2 528 Square vertical lamp, flat lens, 1000W max. SR4SC
KAR 1 531 Round housing, 3 housing sizes, flat lens, 1000W max.
MR 1 521 MR die-cast housing, dedicated optical platform, 2 housing sizes, flat lens, 400W max. SR4SC
MRT 1 521MRT die-cast housing, dedicated optical platform, aesthetically pleasing tension rod assembly, 2
housing sizes, flat lens, 400W max.SR4SC
Lithonia Lighting is a leader in
providing a variety of outdoor
luminaires devoted to energy
and environmental concerns.
Many communities are
interested in maintaining
nighttime visibility, safety
and security while preserving
the night sky. Quality outdoor
lighting considers the visual
needs of the application while
reducing glare and light
trespass onto neighboring
properties, therefore minimiz-
ing sky glow and overall
energy usage. Listed below
are several Lithonia Lighting
product families that include a
wide range of cutoff and full-
cutoff luminaires that produce
quality lighting and minimize
night sky glow.
The Illuminating Engineering
Society of North America
(IESNA, or IES) provides
classifications for luminaires
according to their glare control
and high-angle brightness.
These classifications, along
with their benefits and
limitations, are described
in the Technical and Design
Considerations section on
page 776.
Acuity Brands Lighting
uses Nighttime Friendly™
to identify products that
reduce negative impacts on
the nighttime environment.
Products designated with
the Nighttime Friendly logo
have no uplight, meet the
IESNA definition for full cutoff
optics and reduce high angle
brightness. These measures
of luminaire performance
are consistent with sustain-
ability standards for light
pollution reduction.
For applications where
there is a concern with light
trespass on neighboring
properties, consider products
that limit light behind the
pole, such as the Type 4
sharp cutoff optical system or
house-side shielding.
Spill light or light trespass
is the light that illuminates
surfaces beyond the property
line. An example is the light
on a bedroom wall coming
through the window from the
ball field across the street. A
number of ordinances place
limits on spill light near the
property line as the sole
means of controlling light
trespass. The most effective
way to minimize spill light
from a location is to apply for-
ward throw optics around the
perimeter. Lithonia Lighting’s
optic is designed specifically
for this application.
For more information on sharp cutoff,
visit www.lithonia.com/CutoffLighting/AreaLuminaires.htm.Sharp Cutoff & Light Trespass
AREA LIGHTING
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
585www.lithonia.com | 1-800-279-8041PSG10
NIG
HTTIM
E FRIEN
DLY LIG
HTIN
GNighttime Friendly Lighting
IESNA
The Illuminating Engineering Society of North
America provides a variety of reference material
on effective outdoor lighting design. Both the
IESNA Lighting Handbook, 9th edition, and Recom-
mended Practice No. 33 (RP-33-99), Lighting for
Exterior Environments, offer discussions on design
practices and suggested spill light limitations.
WFL
NEMA
The Luminaire Section of the National Electrical
Manufacturers Association published a document
entitled “White Paper on Outdoor Lighting Code
Issues”. This paper highlights the pros and cons of
methods to control light trespass.
The NEMA Statement of Principles on Outdoor
Lighting Codes also provides general guidance in the
establisement of local lighting ordinances.
IDA
The International Dark-Sky Association is a grass-
roots organization that promotes quality outdoor
lighting practices. Of particular interest to IDA is
the reduction of sky glow. Their guidelines are of
significant benefit for lighting installations near
astronomical observatories or intrinsically dark areas
such as national parks.
Lithonia Lighting has a diverse
selection of wall mounted
luminaires to complement our
various Nighttime Friendly™
area luminaires. Listed below
are several product families
that include a wide range of
cutoff and full-cutoff lumi-
naires that produce quality
lighting and minimize night
sky glow.
Design Recommendations From Industry AssociationsLithonia Lighting is a member of, and participates in the activities of all the associations below.
Notes1 WSR is downlight only.
2 May depend on optical selection. Consult factory.
3 Does not meet Nighttime Friendly™ standards with uplight distribution options.
LUMINAIREMEETS NIGHTTIME
FRIENDLY™ CRITERIAFULL CUTOFF CUTOFF PSG PAGE COMMENTS
ASW 2 542 Aeris™ die-cast housing, architectural style, 2 housing sizes, 400W max.
WSR1,WST, WSQ 3 544 Decorative die-cast housing, 175W max.
WFL 2 546 Architectural style, 2 housing sizes, 400W max., can be ordered with LC90 option to prevent field adjustment.
TWAC 552 Vandal-resistant, polycarbonate lens,100W max.
TWRC 554 General purpose, die-cast aluminum and tempered glass, 400W max., optional full cutoff visor (FCV)
TWR1S 554 General purpose, die-cast aluminum and tempered glass, 175W max.
MRW 2 543 Omero™ die-cast housing, architectural style, 175W max.
WALL MOUNTED LIGHTING
TWR1S
ASW
WST
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com586
DES
IGN
GU
IDEL
INES
IES Beamspread Classifications
for general-purpose floodlighting
The IES classification was formerly referred to as NEMA Type.
The following outdoor design tips provide general guidelines for lighting
design. These guidelines may not apply to all applications.
Facade LightingWhen lighting building facades with ground-
mounted floodlights, there are three considerations:
1. Setback
2. Spacing
3. Aiming
Sign LightingWhen lighting a sign with ground-mounted flood-
lights, there are three considerations:
1. Setback
2. Spacing
3. Aiming
1. Setback
The recommended setback is three-fourths the
building height. If a building is 30 feet tall, the rec-
ommended setback is 22.5 feet from the building.
Locating the floodlight closer to the building will
sacrifice uniformity; setting it farther back will result
in a loss of efficiency.
1. Setback
When using ground-mounted floodlights to light a
sign, the recommended setback is a distance equal
to three-fourths the sign height. For example, the
setback distance for a 12-foot by 6-foot sign would
be 4.5 feet. Locating the floodlight closer will sacrifice
uniformity while setting it farther back will result in a
loss of efficiency.
2. Spacing
The rule of thumb for spacing floodlights is not
to exceed two times the setback distance. If the
setback is 22.5 feet, the floodlights should not be
placed more than 45 feet apart.
2. Spacing
The rule of thumb for spacing floodlights is not
to exceed two times the setback distance. If the
setback is 4.5 feet, the floodlights should not be
placed more than 9 feet apart.
3. Aiming
The floodlight should be aimed at least two-thirds
the height of the building. For example, if a building
is 30 feet high, the recommended aiming point
is approximately 20 feet high. After installation is
complete, aiming can be adjusted to produce the
best appearance. Mounting a full or upper visor to the
floodlight can reduce unwanted spill light.
3. Aiming
The floodlight should be aimed at least two-thirds
up the sign. For example, if a sign is 6 feet tall, then
the floodlight will be aimed approximately 4 feet
high. After installation is completed, aiming can be
adjusted to produce the best appearance. Mounting
a full or upper visor to the floodlight can reduce
unwanted glare.
22.5'setback
10'
20'
30'
12'
4-1/2'
6'
4'
2'
45'spacing
22.5'setback
10'
20'
30'
12'
4-1/2'
9'
4-1/2'
6'
4'
2'
20'
3/4building height
10'
20'
30'
45'spacing
12'
4-1/2'
6'
4-1/2'
6'
4'
2'
The IES beam spreads indicate the angular ranges
(horizontally and vertically) through which the
intensity of the floodlight is greater than 10% of its
maximum intensity. This angular range is referred to
as the ‘Field Angle’.
For example:
FIELD ANGLE DEGREES IES TYPE BEAM DESCRIPTION
10° up to 18° 1 Very narrow
18° up to 29° 2 Narrow
29° up to 46° 3 Medium narrow
46° up to 70° 4 Medium
70° up to 100° 5 Medium wide
100° up to 130° 6 Wide130° and up 7 Very wide
Setback distance = 3/4 x building height
3/4 (30 ft.) = 22.5 ft.
Setback distance = 3/4 x sign height
3/4 (6 ft.)= 4.5 ft.
Spacing = 2 x setback distance
2 x 22.5 ft.= 45 ft. apart
Spacing = 2 x setback distance
4.5 ft. x 2 = 9 ft. apart
Aiming point=2/3 x building height
2/3 (30 ft.)=20 ft. high
Aiming point = 2/3 x sign height
2/3 (6 ft.) = 4 ft. high
Asymmetrical beam spread 138° (H) x 119° (V)
Horizontal Vertical = IES 7 X 6
Floodlighting Design Guide
FLOODLIGHTING
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
587www.lithonia.com | 1-800-279-8041PSG10
Floodlighting Design Guide DESIG
N G
UID
ELINES
90°Aimingpoint
Aim
ing
line
Aiming line
Aim at least 30º to avoid glare.
13'
40'
27'
Flag Lighting
When using ground-mounted floodlights to
light flags there are three considerations:
1. Setback
2. Spacing
3. Aiming
Pole Mounted FloodlightsPole-mounted floodlights are commonly used for
general area lighting applications such as parking
lots and storage yards. When using pole-mounted
floodlights, there are four considerations:
1. Mounting height
2. Spacing
3. Vertical aiming
4. Horizontal aiming
1. Setback
The recommended setback for lighting a flag
is one-third times the pole height. If the pole
is 30 feet tall, the floodlight should be set back
a distance of 10 feet away from the pole.
2. Spacing
When more than one pole is added, pole placement
is a concern. The “4 times“ rule of thumb for spacing
indicates that a pole should be placed four times
the mounting height from the adjacent poles. If a
flood is mounted on a 20-foot pole, space the poles
80 feet apart.
1. Mounting Height
The recommended mounting height is one half the
distance across the area to be lighted. If the area
to be lighted is 40 feet across, the lowest recom-
mended mounting height is 20 feet.
2. Spacing
Ideally, three floodlights are recommended to
light a flag. The floodlights should be placed
approximately 120° apart.
3. Vertical Aiming
A single floodlight uses the two-thirds rule of thumb
for vertical aiming. The fixture is aimed two-thirds
of the distance across the area to be lighted and at
least 30° below horizontal. If the area to be lighted
is 40 feet across, the recommended aiming point
is 27 feet.
Additionally, to minimize glare, the recommended
aiming point distance should never exceed twice the
mounting height. If a pole is 20 feet high, the verti-
cal aiming point should not exceed 40 feet out.
2 (20 ft. mtg. ht.) = 40 ft.
3. Aiming
The recommended aiming point for each
floodlight is the center of the flag or the top of
the pole. Mounting a full or upper visor to the
floodlight can reduce unwanted spill light.
4. Horizontal Aiming
When an additional floodlight is added to a single
pole, horizontal aiming also must be considered.
First, each floodlight should be vertically aimed
according to the two-thirds rule. As long as the
floodlight has a horizontal NEMA 6 or 7 beamspread,
the floodlights can be aimed up to 90° apart.
30
10
Aim at least 30º to avoid glare
13'
40'
27'40
20
Setback distance = 1/3 x pole height
1/3 (30 ft.) = 10 ft.
Pole spacing = 4 x mounting height
4 (20-ft. pole) = 80 feet between poles
Aiming point = 2/3 across distance to be lighted
2/3 (40 ft.) = 27 ft. aiming point
Mounting height = 1/2 distance to be lighted
1/2 (40ft.) = 20 ft.
3 floodlights spaced 120° apart
FLOODLIGHTING
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com588
PO
LES General Information
All luminaire/pole assemblies require proper evaluation to ensure that
the structural integrity of the assembly is not compromised when applied
in specific wind conditions. Therefore, the basis for pole selection in this
catalog is total weight and effective projected area, EPA (ft2), shown
on the individual pole catalog pages. Determination of maximum EPA
(ft2) and weight loading must include all luminaires, bracketry, signs,
decoration, overhead wire or other equipment that will be mounted to
the subject pole. Luminaire EPA (ft2) and weight data are found on their
respective product pages.
The total effective projected area of the luminaires and brackets
shall not exceed the EPA (ft2) listed for the pole selected at a given
wind velocity. Poles that are to be located in areas of known abnormal
conditions will require special consideration. Please consult factory if
poles are required for Florida Building Code or other special wind load
requirements. The map on page 589 gives the wind velocities to be used
in determining luminaire pole compatibility.
NOTE: If during the pole warranty period of one year, the product proves
defective in material or workmanship, the company shall correct, at its
option, by repairing or replacing at no charge to the purchaser, if the pur-
chaser promptly notifies the company. This warranty specifically excludes
fatigue failure or similar phenomena resulting from induced vibration
harmonic oscillation or resonance associated with the movement of air
currents around the product.
(Poles are available only in U.S.)
Notes1 Finish must be specified (poles do NOT ship DDB as standard).
2 Additional architectural colors available; see pages 796-799 or see Achitectural Colors brochure on www.lithonia.com.
3 Aluminum poles only.
4 SSA, SSCA, RSA, RTA, RTAU, RSAH, SSAH only.
5 Must include original order number.
Pole Selection Procedure
Step 1. Select the luminaire and decide how many will be mounted per pole. Determine the effective
projected area, EPA (ft2), which is given on the dimensional information table.
Step 2. Determine the appropriate mounting method for the luminaire. Options include arm, bracket or
wall mounting.
Step 3. Add together the EPAs (ft2) of the luminaire and arm/bracket. Multiply by number of fixtures to
be mounted on one pole.
Step 4. Consult the wind map on page 589 to determine the basic wind velocity for your area.
Step 5. Select the material (steel or aluminum) and shape (square or round) of the pole. Refer to the
“Technical Information” chart on the appropriate pole page.
A. Find the desired nominal mounting height in the second column.
B. Verify that the fixture weight does not exceed the maximum weight listed for the desired pole.
C. Compare your total EPA (ft2) loading with the maximum EPA (ft2) value found in the wind
speed column for your area. Check that the equipment you are using will not exceed this value.
D. If both the weight and EPA (ft2) values do not exceed the value for which the pole is rated,
you have selected the correct pole. If, however, either one of those numbers exceeds the
maximum rated values, compare the EPA (ft2) and fixture weight loads to the next larger
pole of the same mounting height.
NOTES: “Call Before Number” and complete pole description MUST be included before order can be processed. Bolt templates will be shipped
with anchor bolts. To pre-ship templates, place an order for the appropriate template number.
CAUTION: This pole selection process is a guideline only. Lithonia Lighting assumes no responsibility for selection and recommends consulta-
tion with qualified individuals for verification of luminaire/pole assembly selection.
Shaft typeNominal mounting height
Nominal shaft base size/Wall thickness Fixture mounting method Options Finish1
SSS Square straight steel
RSS Round straight steel
STS Square tapered steel
RTS Round tapered steel
RTSU Round tapered steel with arm(s)
STSH Square tapered steel hinged
SPRTS Round tapered steel sportslighting
SSA Square straight aluminum
SSCA Square straight aluminum, cruciform
RSA Round straight aluminum
RTA Round tapered aluminum
RTAU Round tapered aluminum with arm(s)
RSAH Round straight aluminum hinged
SSAH Square straight aluminum hinged
RTF Round tapered fiberglass
RTFDB Round tapered fiberglass direct burial
SSF Square straight fiberglass
STC Square tapered concrete
SPRTC Round tapered concrete sportslighting
SSWDB Square straight wood direct burial
8-50'; sportslighting poles up to 115’.
See submittal sheets for
specific information.
Nominal shaft base size
Wall thickness
3 B 0.120"
4 C 0.125"
5 E 0.156"
6 G 0.188"
7 J 0.250"
8 K 0.312"
9 L 0.219"
10 P 0.375"
PT Open-top
Tenon mounting
T20 2-3/8” OD (2” NPS)
T25 2-7/8” OD (2-1/2” NPS)
T30 3-1/2” OD (3” NPS)
T35 4” OD (3-1/2” NPS)
Drill mounting
DM19 1 at 90°
DM28 2 at 180°
DM29 2 at 90°
DM39 3 at 90°
DM49 4 at 90°
DM32 3 at 120° (round poles)
Aeris drill mounting
DM19AS 1 at 90°
DM28AS 2 at 180°
DM29AS 2 at 90°
DM39AS 3 at 90°
DM49AS 4 at 90°
DM32AS 3 at 120° (round poles)
See pages 612-613
MAEX Match existing5
Architectural colors2 Polyester powder
Standard colors
DDB Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural aluminum
BA Brushed aluminum3
Classic colors
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Class 1 architectural anodized4
ABL Black
ADB Dark bronze
ANA Natural
ORDERING INFORMATION Example: SSA 16 4G DM19 DMB
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Lead times will vary depending on options selected. Consult with your sales representative.
POLES
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
589www.lithonia.com | 1-800-279-8041PSG10
General Information PO
LES
WIN
D M
AP
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com590
PO
LES Steel
SSSSquare Straight Steel
Intended Use
Square straight steel general
purpose pole for up to 39-
foot mounting heights.
Construction
Shaft: Weldable grade, hot-
rolled, commercial-quality
carbon steel tubing with a
minimum yield of 55,000
psi (11-gauge) or 50,000
psi (7-gauge). Uniform wall
thickness of .125" or .188".
Shaft is one piece with a
full-length longitudinal high-
frequency electric resistance
weld. Uniformly square
in cross-section with flat
sides, small corner radii and
excellent torsional qualities.
Available shaft widths are 4,
5 and 6 inches.
Anchor base: Fabricated
from hot-rolled carbon steel
plate conforming to ASTM
A36 that meets or exceeds a
minimum-yield strength of
36,000 psi. Base plate and
shaft are circumferentially
welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced hand-
hole rim having nominal
dimensions of 3" x 5" for all
shafts. Includes steel cover
with attachment screws.
Hardware: All fasteners are
high-strength, galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes full-base
cover finished to match pole.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT.
(FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK. (IN.)
GAUGE80
MPHMAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX. SHIP WT.
(LBS.)SSS 10 4C 10 4 x 10 0.125 11 30.6 765 23.8 595 18.9 473 8 - 9 3/4 x 18 x 3 75SSS 12 4C 12 4 x 12 0.125 11 24.4 610 18.8 470 14.8 370 8 - 9 3/4 x 18 x 3 90SSS 14 4C 14 4 x 14 0.125 11 19.9 498 15.1 378 11.7 293 8 - 9 3/4 x 18 x 3 100SSS 16 4C 16 4 x 16 0.125 11 15.9 398 11.8 295 8.9 223 8 - 9 3/4 x 18 x 3 115SSS 18 4C 18 4 x 18 0.125 11 12.6 315 9.2 230 6.7 168 8 - 9 3/4 x 18 x 3 125SSS 20 4C 20 4 x 20 0.125 11 9.6 240 6.7 167 4.5 150 8 - 9 3/4 x 18 x 3 140SSS 20 4G 20 4 x 20 0.188 7 14.0 350 11.0 275 8.0 200 8 - 9 3/4 x 30 x 3 198SSS 20 5C 20 5 x 20 0.125 11 17.7 443 12.7 343 9.4 235 10 - 12 1 x 36 x 4 185SSS 20 5G 20 5 x 20 0.188 7 28.1 703 21.4 535 16.2 405 10 - 12 1 x 36 x 4 265SSS 25 4C 25 4 x 25 0.125 11 4.8 150 2.6 100 1.0 50 8 - 9 3/4 x 18 x 3 170SSS 25 4G 25 4 x 25 0.188 7 10.8 270 7.7 188 5.4 135 8 - 9 3/4 x 30 x 3 245SSS 25 5C 25 5 x 25 0.125 11 9.8 245 6.3 157 3.7 150 10 - 12 1 x 36 x 4 225SSS 25 5G 25 5 x 25 0.188 7 18.5 463 13.3 333 9.5 238 10 - 12 1 x 36 x 4 360SSS 30 4G 30 4 x 30 0.188 7 6.0 150 4.0 100 2.5 75 8 - 9 3/4 x 30 x 3 295SSS 30 5C 30 5 x 30 0.125 11 4.7 150 2.0 50 - - 10 - 12 1 x 36 x 4 265SSS 30 5G 30 5 x 30 0.188 7 10.7 267 6.7 167 3.9 100 10 - 12 1 x 36 x 4 380SSS 30 6G 30 6 x 30 0.188 7 19.0 475 13.2 330 9.0 225 11 - 13 1 x 36 x 4 520SSS 35 5G 35 5 x 35 0.188 7 5.9 150 2.5 100 - - 10 - 12 1 x 36 x 4 440SSS 35 6G 35 6 x 35 0.188 7 12.4 310 7.6 190 4.2 105 11 - 13 1 x 36 x 4 540SSS 39 6G 39 6 x 39 0.188 7 7.2 180 3.0 75 - - 11 - 13 1 x 36 x 4 605
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
A
C
B
Notes
side drilling.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
ANCHOR BOLT AND TEMPLATE DESCRIPTION
4"C 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB18-0 ABSSS-4C4"G 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB30-0 ABSSS-4G5" 10" - 12" 3.375" - 4.00" 11" ABTEMPLATE PJ50010 AB36-0 ABSSS-56" 11" - 13" 3.375" - 4.00" 12.5" ABTEMPLATE PJ50011 AB36-0 NA
18”
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
591www.lithonia.com | 1-800-279-8041PSG10
PO
LESSteel
RSSRound Straight Steel
Intended Use
Round straight steel general
purpose pole for up to 30-
foot mounting heights.
Construction
Shaft: Weldable grade, hot
rolled, commercial-quality
carbon steel tubing with
minimum yield of 42,000 psi.
Uniform wall thickness of
.120". Shaft is one piece with
a full-length, longitudinal,
high-frequency electric resis-
tance weld. Uniformly round
in cross-section down length
of shaft with no taper.
Anchor base: Fabricated from
hot-rolled carbon steel plate
with 3/4" thickness conform-
ing to ASTM A36. Base plate
and shaft are circumferen-
tially welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced hand-
hole rim located 18" above
base. Includes cover with
attachment screws.
Hardware: All fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes full-base
cover finished to match pole.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE A
BOLT PROJECTION B
BASE SQUARE C
TEMPLATE DESCRIPTION
ANCHOR BOLT
DESCRIPTION3" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-04" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-0
4.5" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-05" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-0
A
C
B
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
MAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)RSS 8 4-5B 8 4.5 x 8 0.120 24.7 630 19.7 495 16.0 430 8 3/4 x 18 x 3 55RSS 10 3B 10 3 x 10 0.120 10 250 7.7 190 6.0 175 8 3/4 x 18 x 3 55RSS 10 4B 10 4 x 10 0.120 19.1 480 15.0 375 12.2 305 8 3/4 x 18 x 3 70
RSS 10 4-5B 10 4.5 x 10 0.120 24.5 615 19.5 490 15.8 395 8 3/4 x 18 x 3 75RSS 12 3B 12 3 x 12 0.120 7.7 195 5.8 145 4.4 130 8 3/4 x 18 x 3 60RSS 12 4B 12 4 x 12 0.120 15.0 390 11.8 300 9.5 240 8 3/4 x 18 x 3 80
RSS 12 4-5B 12 4.5 x 12 0.120 19.8 495 15.7 395 12.7 320 8 3/4 x 18 x 3 85RSS 14 3B 14 3 x 14 0.120 6.0 175 4.4 130 3.3 90 8 3/4 x 18 x 3 70RSS 14 4B 14 4 x 14 0.120 12.2 305 9.4 250 7.6 195 8 3/4 x 18 x 3 90
RSS 14 4-5B 14 4.5 x 14 0.120 16.2 405 12.8 320 10.3 260 8 3/4 x 18 x 3 95RSS 15 4-5B 15 4.5 x 15 0.120 12.0 300 9.5 250 7.5 200 8 3/4 x 18 x 3 96
RSS 16 3B 16 3 x 16 0.120 4.6 125 3.2 100 2.3 60 8 3/4 x 18 x 3 80RSS 16 4B 16 4 x 16 0.120 9.6 250 7.4 185 5.9 150 8 3/4 x 18 x 3 100
RSS 16 4-5B 16 4.5 x 16 0.120 13.1 330 10.2 265 8.2 205 8 3/4 x 18 x 3 105RSS 18 3B 18 3 x 18 0.120 3.4 90 2.3 60 1.4 70 8 3/4 x 18 x 3 90RSS 18 4B 18 4 x 18 0.120 7.6 190 5.7 180 4.5 130 8 3/4 x 18 x 3 110
RSS 18 4-5B 18 4.5 x 18 0.120 10.5 265 8.2 210 6.5 165 8 3/4 x 18 x 3 115RSS 20 3B 20 3 x 20 0.120 2.4 100 1.4 75 - - 8 3/4 x 18 x 3 100RSS 20 4B 20 4 x 20 0.120 6.0 150 4.45 150 3.45 125 8 3/4 x 18 x 3 120
RSS 20 4-5B 20 4.5 x 20 0.120 8.5 215 6.6 165 5.2 130 8 3/4 x 18 x 3 130RSS 20 5B 20 5 x 20 0.120 11.75 300 9.1 230 7.25 180 8 3/4 x 18 x 3 145
RSS 22 4-5B 22 4.5 x 22 0.120 6.0 150 4.5 125 3.75 100 8 3/4 x 18 x 3 134RSS 25 4B 25 4 x 25 0.120 2.85 100 1.95 75 1.35 75 8 3/4 x 18 x 3 145
RSS 25 4-5B 25 4.5 x 25 0.120 4.8 130 3.6 90 2.7 90 8 3/4 x 18 x 3 145RSS 25 5B 25 5 x 25 0.120 7.25 180 5.5 150 4.25 150 8 3/4 x 18 x 3 180
RSS 30 4-5B 30 4.5 x 30 0.120 2.3 80 1.5 75 1.0 60 8 3/4 x 18 x 3 185RSS 30 5B 30 5 x 30 0.120 4.2 150 3 125 2.25 100 8 3/4 x 18 x 3 210
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Notes
side drilling.
18"
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com592
SteelP
OLE
S
STSSquare Tapered Steel
Intended Use
Square tapered steel general
purpose pole for up to 50-
foot mounting heights.
Construction
Shaft: Weldable-grade
(ASTM A-595 Grade A) hot-
rolled commercial-quality
carbon steel tubing with
minimum yield of 55,000
psi. Uniform wall thickness
of 11-gauge (0.1196") or
7-gauge (0.1793"). Shaft is
one piece with a full-length
longitudinal high-frequency
resistance weld and is square
in cross-section having flat
sides, radiused corners and
a uniform taper of approxi-
mately .11" per foot.
Anchor base: Fabricated
from hot-rolled carbon steel
plate conforming to ASTM
A36 that meets or exceeds a
minimum-yield strength of
36,000 psi. Base plate and
shaft are circumferentially
welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Rectangular, rein-
forced hand-hole rim having
nominal dimensions of 3" x
5" for shafts less than 6.375"
square and oval shaped 4"
x 6.5" for all other shafts.
Steel cover with attachment
screws included. Hand hole is
located 18" above base.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes full base
cover finished to match pole.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (BASE IN. X
TOP IN. X FT.)
WALL THICK.
(IN.)GAUGE
80 MPH
MAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX SHIP WT.
(LBS.)STS 20 5-2B 20 5.25 x 3.05 x 20 0.125 11 18.0 452 13.8 345 10.7 268 10.75 1 x 36 x 4 155STS 20 5-5F 20 5.50 x 3.30 x 20 0.188 7 30.5 764 24.0 602 19.0 477 11 1 x 36 x 4 235STS 25 6-0B 25 6.00 x 3.25 x 25 0.125 11 16.8 422 12.6 315 9.5 238 12 1 x 36 x 4 205STS 25 6-4F 25 6.41 x 3.66 x 25 0.188 7 28.5 713 22.5 563 18.2 455 12.5 1 x 36 x 4 310STS 30 6-4B 30 6.41 x 3.11 x 30 0.125 11 13.6 340 9.8 245 7.0 175 12.5 1 x 36 x 4 260STS 30 6-4F 30 6.41 x 3.11 x 30 0.188 7 23.6 590 17.9 448 13.7 343 12.5 1 x 36 x 4 375STS 35 6-8B 35 6.81 x 2.96 x 35 0.125 11 10.7 269 7.3 184 4.8 120 13 1 x 36 x 4 305STS 35 7-1F 35 7.13 x 3.28 x 35 0.188 7 23.4 585 17.4 435 13.0 325 13.5 1 x 36 x 4 475STS 39 7-1B 39 7.18 x 2.92 x 39 0.125 11 8.6 215 5.4 135 3.0 75 13.5 1 x 36 x 4 345STS 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.3 483 14.2 355 10.4 260 13.5 1 x 36 x 4 500STS 45 7-8F 45 7.88 x 2.93 x 45 0.188 7 16.0 400 11.1 278 7.4 187 14.5 1 x 36 x 4 620STS 45 8-7F 45 8.75 x 3.80 x 45 0.188 7 23.5 588 16.6 415 11.4 287 15.75 1-1/4 x 42 x 6 730STS 50 8-8F 50 8.81 x 3.31 x 50 0.188 7 19.4 485 13.2 332 8.7 218 16 1-1/4 x 42 x 6 780
18”
A
C
B
Notes
side drilling.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
5.2" B 10.75" 3.50"-4.25" 10.75" ABTEMPLATE PJ50095 AB36-05.5" F 11" 3.75"-4.50" 11" ABTEMPLATE PJ50096 AB36-06.0" B 12" 3.50"-4.25" 11.5" ABTEMPLATE PJ50097 AB36-06.4" F 12.5" 4.00"-4.75" 11.875" ABTEMPLATE PJ50098 AB36-06.4" B 12.5" 3.50"-4.25" 11.875" ABTEMPLATE PJ50099 AB36-06.8" B 13" 3.50"-4.25" 12.25" ABTEMPLATE PJ50101 AB36-07.1" F 13.5" 4.25"-5.00" 12.625" ABTEMPLATE PJ50102 AB36-07.1" B 13.5" 3.50"-4.25" 12.625" ABTEMPLATE PJ50103 AB36-07.8" F 14.5" 4.00"-4.75" 13.375" ABTEMPLATE PJ50105 AB36-08.7" F 15.75" 4.75"-5.50" 14.25" ABTEMPLATE PJ50106 AB42-08.8" F 16" 4.50"-5.25" 15.5" ABTEMPLATE PJ50107 AB42-0
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
593www.lithonia.com | 1-800-279-8041PSG10
PO
LESSteel
RTSRound Tapered Steel
Intended Use
Round tapered steel general
purpose pole for up to 50-
foot mounting heights.
Construction
Shaft: Weldable-grade
(ASTM A-595 Grade A), hot-
rolled, commercial-quality
carbon steel tubing with
minimum yield of 55,000
psi. Uniform wall thickness
of 11-gauge (0.1196") or
7-gauge (0.1793"). Shafts are
one piece construction with
a full-length, longitudinal,
high-frequency resistance
weld. Round in cross-section,
having uniform taper of ap-
proximately .14" per foot.
Anchor base: Fabricated
from hot-rolled carbon steel
plate conforming to ASTM
A36 that meets or exceeds a
minimum-yield strength of
36,000 psi. Base plate and
shaft are circumferentially
welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Rectangular,
reinforced hand-hole rim
having nominal dimensions
of 3" x 5" for 5.9" shafts and
oval-shaped 4" x 6.5" hand
hole for all other shafts.
Steel cover with attachment
screws included. Hand hole is
located 18" above base.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Bolt cover: Bolt covers are
zinc diecast and fasten to
shaft by a 0.25" stainless
steel, self-tapping, hex-head
screw. Full base cover avail-
able as option.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.)
WALL THICK.
(IN.)GAUGE
80 MPH
MAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)RTS 20 5-9B 20 5.9 x 3.1 x 20 0.125 11 19.3 482 15.1 377 12.2 305 9.0 1 x 36 x 4 140RTS 20 6-5B 20 6.5 x 3.7 x 20 0.125 11 24.2 605 19.3 482 15.6 390 9.5 1 x 36 x 4 160RTS 25 5-9B 25 5.9 x 2.4 x 25 0.125 11 12.5 312 9.9 247 8 200 9.0 1 x 36 x 4 155RTS 25 7-0B 25 7.0 x 3.5 x 25 0.125 11 20.3 507 16.2 405 13.1 327 10.0 1 x 36 x 4 200RTS 25 7-0F 25 7.0 x 3.5 x 25 0.188 7 30.5 760 24.0 625 19.8 495 10.0 1 x 36 x 4 280RTS 30 6-6B 30 6.6 x 2.4 x 30 0.125 11 11.7 292 9.3 232 7.5 187 9.5 1 x 36 x 4 200RTS 30 8-0B 30 8.0 x 3.8 x 30 0.125 11 18.9 473 14.9 373 12 300 11.0 1 x 36 x 4 265RTS 30 8-0F 30 8.0 x 3.8 x 30 0.188 7 33.5 838 27.0 675 22.0 550 11.0 1-1/4 x 42 x 6 380RTS 35 7-3B 35 7.3 x 2.4 x 35 0.125 11 11.2 280 8.9 222 7.1 177 10.5 1 x 36 x 4 250RTS 35 8-5B 35 8.5 x 3.6 x 35 0.125 11 18.9 472 15.1 377 12.2 305 11.5 1 x 36 x 4 315RTS 35 9-5B 35 9.5 x 4.6 x 35 0.125 11 23.2 580 18.2 455 14.5 363 13.0 1 x 36 x 4 370RTS 39 7-8B 39 7.8 x 2.4 x 39 0.125 11 10.7 267 8.5 212 6.6 165 11.0 1 x 36 x 4 285RTS 39 9-0B 39 9.0 x 3.6 x 39 0.125 11 17.2 430 13.5 338 10.8 270 12.5 1 x 36 x 4 355RTS 39 9-0F 39 9.0 x 3.6 x 39 0.188 7 28.5 715 23.0 575 19.0 475 12.5 1-1/4 x 42 x 6 515
RTS 45 10-0B 45 10.0 x 3.7 x 45 0.125 11 17.4 435 13.5 338 10.6 265 13.5 1 x 36 x 4 450RTS 45 10-0F 45 10.0 x 3.7 x 45 0.188 7 28.5 715 23.0 575 19.0 475 13.5 1-1/4 x 42 x 6 650RTS 50 10-0B 50 10.0 x 3.0 x 50 0.125 11 13.2 330 10.6 265 8.3 208 13.5 1 x 36 x 4 475RTS 50 10-0F 50 10.0 x 3.0 x 50 0.188 7 20.5 512 16.5 412 13.6 340 13.5 1¼ x 42 x 6 680
A
C
Notes
side drilling.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
5.9" B 9" 3.50" - 4.25" 10" ABTEMPLATE PJ50075 AB36-06.5" B 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50074 AB36-07.0" B 10" 3.50" - 4.25" 10.875" ABTEMPLATE PJ50077 AB36-07.0" F 10" 3.75" - 4.50" 10.875" ABTEMPLATE PJ50076 AB36-06.6" B 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50078 AB36-08.0" B 11" 3.50" - 4.25" 11.5" ABTEMPLATE PJ50079 AB36-08.0" F 11" 4.50" - 5.25" 11.5" ABTEMPLATE PJ50080 AB42-07.3" B 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50081 AB36-08.5" B 11.5" 3.75" - 4.50" 12" ABTEMPLATE PJ50082 AB36-09.5" B 13" 3.75" - 4.50" 13" ABTEMPLATE PJ50083 AB36-07.8" B 11" 3.75" - 4.50" 11.5" ABTEMPLATE PJ50084 AB36-09.0" B 12.5" 3.75" - 4.50" 12.375" ABTEMPLATE PJ50085 AB36-09.0" F 12.5" 4.50" - 5.25" 12.375" ABTEMPLATE PJ50086 AB42-0
10.0" B 13.5" 3.75" - 4.50" 14" ABTEMPLATE PJ50087 AB36-010.0" F 13.5" 4.50" - 5.25" 14" ABTEMPLATE PJ50088 AB42-0
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
B
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com594
SteelP
OLE
S
RTSURound Tapered Steel with Upsweep Mast Arms
Intended Use
Round tapered steel roadway
pole with upsweep mast
arm(s) for up to 40-foot
mounting heights including
rise of arm.
Construction
Shaft: Weldable-grade
(ASTM A-595 Grade A), hot-
rolled, commercial-quality
carbon steel tubing with
minimum yield of 55,000
psi. Uniform wall thickness
of 11-gauge (0.1196") or
7-gauge (0.1793"). Shafts are
one-piece construction with
a full-length, longitudinal,
high-frequency resistance
weld. Round in cross-section,
having uniform taper of ap-
proximately .14" per foot.
Arm: Body is 2-3/8 " O.D.
(2" NPS, Schedule 40)
galvanized steel tube with
minimum yield strength of
36,000 psi. Welding follows
AWS standards. Arms are
galvanized and/or painted af-
ter fabrication. Arm mounts
to shaft via 1/2" steel bolt
Simplex mount.
Anchor base: Fabricated
from hot-rolled carbon steel
plate conforming to ASTM
A36 that meets or exceeds a
minimum-yield strength of
36,000 psi. Base plate and
shaft are circumferentially
welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Rectangular,
reinforced hand-hole rim
having nominal dimensions
of 3" x 5" for 5.9" shafts and
oval-shaped 4" x 6.5" hand
hole for all other shafts.
Steel cover with attachment
screws included. Hand hole is
located 18" above base.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided.
Bolt cover: Bolt covers are
zinc diecast and fasten to
shaft by a 0.25" stainless
steel, self-tapping, hex-head
screw. Full base cover avail-
able as option.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLEA
BOLT PROJECTIONB
BASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
5.9' 9" 3.50" - 4.25" 10" ABTEMPLATE PJ50075 AB36-06.5" 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50074 AB36-07.0" 10" 3.50" - 4.25" 10.875" ABTEMPLATE PJ50077 AB36-07.3" 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50133 AB36-07.5" 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50133 AB36-08.0" 11" 3.50" - 4.25" 11.5" ABTEMPLATE PJ50079 AB36-08.5" 11.5" 3.75" - 4.50" 12" ABTEMPLATE PJ50082 AB36-09.0" 12.5" 3.75" - 4.50" 12.375" ABTEMPLATE PJ50085 AB36-09.5" 13" 4.00" - 4.50" 13" ABTEMPLATE PJ50134 AB36-0
10.0" 13.5" 4.00" - 4.50" 14" ABTEMPLATE PJ50135 AB36-010.5" 14" 4.50" - 5.00" 14.5" ABTEMPLATE PJ50136 AB42-0
A
C
Notes
plus rise of upsweep arm.
added, consult factory.
consult factory.
TECHNICAL INFORMATION
CATALOG NUMBERNOM.
MOUNT. HT. (FT.)
MTG. ARM LENGTH
(FT.)
POLE SHAFT BASE
DIA. (IN.)
WALL THICK.
(IN.)
EPA FT2 W/1.3 GUST UP TO 100 MPH (PER ARM)
MAX. WT. PER ARM
(LBS.)
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX. SHIP WT.
(LBS.)
SINGLE-ARM
POLES
RTSU 20 5-9B SMP US4 20 4 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 20 5-9B SMP US6 20 6 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 20 5-9B SMP US8 20 8 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 25 5-9B SMP US4 25 4 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 25 5-9B SMP US6 25 6 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 25 5-9B SMP US8 25 8 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 30 6-6B SMP US4 30 4 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 30 6-6B SMP US6 30 6 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 30 6-6B SMP US8 30 8 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 35 7-3B SMP US4 35 4 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 35 7-3B SMP US6 35 6 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 35 7-3B SMP US8 35 8 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 40 9-0B SMP US4 40 4 9 0.120 2 76 12.5 1 x 36 x 4 405RTSU 40 9-0B SMP US6 40 6 9 0.120 2 76 12.5 1 x 36 x 4 405RTSU 40 9-0B SMP US8 40 8 9 0.120 2 76 12.5 1 x 36 x 4 405
DOUBLE-ARM
POLES
RTSU 20 5-9B SMP 2US4 20 4 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 20 5-9B SMP 2US6 20 6 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 20 5-9B SMP 2US8 20 8 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 25 5-9B SMP 2US4 25 4 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 25 5-9B SMP 2US6 25 6 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 25 5-9B SMP 2US8 25 8 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 30 6-6B SMP 2US4 30 4 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 30 6-6B SMP 2US6 30 6 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 30 6-6B SMP 2US8 30 8 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 35 7-3B SMP 2US4 35 4 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 35 7-3B SMP 2US6 35 6 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 35 7-3B SMP 2US8 35 8 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 40 9-0B SMP 2US4 40 4 9 0.120 2 76 12.5 1 x 36 x 4 455RTSU 40 9-0B SMP 2US6 40 6 9 0.120 2 76 12.5 1 x 36 x 4 455RTSU 40 9-0B SMP 2US8 40 8 9 0.120 2 76 12.5 1 x 36 x 4 455
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
B
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
595www.lithonia.com | 1-800-279-8041PSG10
PO
LESSteel
STSHSquare Tapered Steel, Hinged
Intended Use
Square tapered steel hinged
pole with 20- to 39-foot
mounting heights. Good ap-
plication where maintenance
access is limited.
Construction
Shaft: Weldable-grade,
hot-rolled, commercial-
quality carbon steel having
a guaranteed minimum
yield strength of 55,000 psi
and is supplied in 11-gauge
(.1196") or 7-gauge (.1793")
nominal thickness. Pole is
one-piece construction with
a full-length, longitudinal,
high-frequency, electric-
resistance weld. Shaft is
square in cross-section
having flat sides, radi used
corners, and uniform taper of
approximately 0.11 inches per
foot (4-inch square poles are
not tapered).
Hinge: Hinge pin is stainless
steel. A flexible wiring guide
is provided, passing through
the hinge area for wiring
protection. Hinge is external.
Anchor base: Fabricated
from hot-rolled carbon steel
plate conforming to ASTM
A36 that meets or exceeds a
minimum-yield strength of
36,000 psi. Base plate and
shaft are circumferentially
welded top and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Rectangular, rein-
forced hand-hole rim having
nominal dimensions of 3" x 5"
for 4" shafts and oval shaped
4" x 6.5" for all other shafts.
Steel cover with attachment
screws included. Hand hole is
located 18" above base.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes full-base
cover finished to match pole.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT.
(FT.)
POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.)
WALL THICK.
(IN.)GAUGE 80 MPH MAX. WT. 90 MPH MAX. WT. 100 MPH MAX. WT.
BOLT CIRCLE (IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS)STSH 20 4F 20 4 x 4 x 20 0.188 7 11.6 217 8.5 217 6.2 217 8.5 - 10 3/4 x 18 x 3 300STSH 25 4F 25 4 x 4 x 25 0.188 7 7.1 160 4.8 160 3.1 160 8.5 - 10 3/4 x 18 x 3 370
STSH 25 6-4B 25 6.41 x 3.63 x 25 0.125 11 18.0 254 13.0 254 9.3 254 12.5 1 x 36 x 4 355STSH 30 4F 30 4 x 4 x 30 0.188 7 4.0 120 2.1 120 0.8 120 8.5 - 10 3/4 x 18 x 3 435
STSH 30 6-4B 30 6.41 x 3.08 x 30 0.125 11 12.5 230 8.3 230 5.1 230 12.5 1 x 36 x 4 440STSH 35 7-1B 35 7.18 x 2.88 x 35 0.125 11 7.1 160 3.2 160 - - 13.5 1 x 36 x 4 540STSH 35 7-1F 35 7.13 x 2.87 x 35 0.188 7 22.0 155 16.9 155 12.1 155 13.5 1 x 36 x 4 700STSH 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.5 110 13.5 110 9.2 110 13.5 1 x 36 x 4 740
POLE DATASHAFT
BASE SIZEBOLT CIRCLE
ABOLT PROJECTION
BBASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
4.0" F 8.5" - 10" 3.50" - 4.25" 9.75" ABTEMPLATE PJ50091 AB18-06.4" B 12.5" 3.75" - 4.50" 11.875" ABTEMPLATE PJ50092 AB36-07.1" B 13.5" 3.50" - 4.25" 12.625" ABTEMPLATE PJ50094 AB36-07.1" F 13.5" 4.00" - 4.75" 12.625" ABTEMPLATE PJ50093 AB36-0
Removable
Winch detail (accessory)
A
Boltslots
C
B
Notes
WINCH ORDERINGWINCH NOMENCLATURE SHAFT SIZE
STSHWCH 4F 4FSTSHWCH 6-4B 6-4BSTSHWCH 7-1B 7-1BSTSHWCH 7-1F 7-1F
External hinge detail
Hinge pin
ShroudWiringprotection
Bottom
Top assembly
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com596
SteelP
OLE
S
SPRTSRound Tapered Steel Sportlighting
Intended Use
Round tapered steel sports
lighting pole with 40- to
80-foot mounting heights.
60 foot and longer are two
section poles.
Construction
Shaft: Pole shaft sections
are high-strength low-alloy
steel conforming to ASTM
A572 Grade 65 or ASTM
A595 Grade A. Cross-section
is round or 16-sided with a
4" bend radius. Each pole is
a constant tapered hollow
steel section up to 55 feet in
length with a minimum 1-1/2
times diameter slip joint as
standard for two section pole.
Shaft plate is single thickness
without laminations.
Anchor base: Fabricated
from hot-rolled carbon steel
plate that conforms to ASTM
A36 or ASTM A572 Grade
42. Base plate and shaft are
circumferentially welded top
and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Hand hole: Oval shaped,
reinforced hand-hole rim
having a nominal dimension
of 4" x 6.5". Steel cover with
attachment screws included.
Hand hole is located 18"
above base.
Top cap: Removable top
cap provided with all drill-
mount poles.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATIONBOTTOM SECTION TOP SECTION EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT.
(FT.)
BASE DIA. (IN.)
WALL THICK.
(IN.)
BASE DIA. (IN.)
WALL THICK.
(IN.)
80 MPH.
MAX. WT. 90 MPH.MAX. WT.
100 MPH. MAX. WT.BOLT
CIRCLE (IN.)
BOLT SIZE (IN. X IN. X
IN.)
# OF ANCHOR
BOLTS
APPROX. SHIP WT.
(LBS.)SPRTS 40 HT01 40 9 0.1193 - - 17.2 430 13.5 338 10.8 270 12.5 1 x 36 x 4 4 366SPRTS 40 HT02 40 9 0.1793 - - 26.1 654 20.6 517 16.7 419 12.5 1-1/4 x 42 x 6 4 514SPRTS 40 HT03 40 10 0.1793 - - 38.6 965 30.6 765 24.6 615 13.5 1-1/4 x 42 x 6 4 604SPRTS 50 HT01 50 10 0.1193 - - 13.2 330 10.6 265 8.3 208 13.5 1 x 36 x 4 4 486SPRTS 50 HT02 50 10 0.1793 - - 20.5 512 16.5 412 13.6 340 13.5 1-1/4 x 42 x 6 4 684SPRTS 50 HT03 50 11 0.1793 - - 29.9 748 23.5 588 18.6 465 15 1-1/4 x 42 x 6 4 813SPRTS 50 HT04 50 13 0.1793 - - 50.4 1,260 39.7 992 31.4 785 17 1-1/2 x 54 x 6 4 1024SPRTS 50 HT05 50 13 0.2391 - - 69.2 1,730 55.0 1,375 44.2 1,105 17.5 1-3/4 x 84 x 6 4 1339SPRTS 60 HT01 60 11.5 0.1793 5 0.1196 20.0 600 16.0 480 13.0 390 16 1-1/4 x 42 x 6 4 907SPRTS 60 HT02 60 13 0.1793 6.5 0.1196 36.0 1,080 29.0 870 22.0 660 17 1-1/4 x 42 x 6 6 1110SPRTS 60 HT03 60 13 0.2391 6.6 0.1793 49.0 1,470 40.0 1,200 32.0 960 17 1-1/2 x 54 x 6 6 1467SPRTS 60 HT04 60 15.87 0.1875 12 0.1793 78.0 2,340 62.0 1,860 50.0 1,500 21 1-1/2 x 54 x 6 6 1651SPRTS 70 HT01 70 13 0.1793 6.6 0.1793 20.6 515 16.7 417 13.7 342 17 1-1/2 x 54 x 6 4 1228SPRTS 70 HT02 70 13 0.2391 6.6 0.1793 23.8 595 19.3 482 15.9 397 17.5 1-3/4 x 84 x 6 4 1547SPRTS 70 HT03 70 14.57 0.1875 12 0.1793 39.0 1,170 30.0 900 23.0 690 19 1-1/4 x 42 x 6 6 1597SPRTS 70 HT04 70 15.87 0.1875 12 0.1793 52.0 1,560 41.0 1,230 33.0 990 21 1-1/2 x 54 x 6 6 1801SPRTS 70 HT05 70 16.82 0.1875 12 0.1793 65.0 1,950 53.0 1,590 42.0 1,260 22.75 1-1/2 x 54 x 6 6 1984SPRTS 80 HT01 80 15.87 0.1875 12 0.1793 37.0 1,110 29.0 870 23.0 690 21 1-1/2 x 54 x 6 6 1899SPRTS 80 HT02 80 16.82 0.1875 12 0.1793 45.0 1,350 36.0 1,080 28.0 840 22.75 1-1/2 x 54 x 6 6 2137SPRTS 80 HT03 80 17.53 0.2092 13 0.1875 58.0 1,740 46.0 1,380 35.0 1,050 23 1-1/2 x 54 x 6 6 2350SPRTS 80 HT04 80 18.7 0.1875 12 0.1793 70.0 2,100 56.0 1,680 44.0 1,320 23 1-1/2 x 54 x 6 8 2447
Notes
18"
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
4-bolt
Hand holeA
D B
C
Hand holeA
D B
C
8-bolt
Hand holeA
D B
C
6-bolt
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
597www.lithonia.com | 1-800-279-8041PSG10
PO
LES
ACR3, 3-Fixture Angle Arm
3.0"
3'6"
1'-5"8"
1.75"
2.0"
1'-5"
ACR2, 2-Fixture Angle Arm
CR4, 4-Fixture Crossarm
10'-0"
3'-0"
3" Sched40 pipe
CR3, 3-Fixture Crossarm
7'-0"
3'-0"
3" Sched40 pipe
CR2, 2-Fixture Crossarm
7'-0"
3'-0"
3" Sched40 pipe
Projected area is for the crossarm only. The crossarm projected area is added to the luminaire projected area to get a total effective projected area (EPA).
2.6"
10'-6"
4'-11"8"
1.75"
2.0"
4'-11"
ACR5, 5-Fixture Angle Arm
2.6"
8'-0"
2'-5"8"
1.75"
2.0"
2'-5"
ACR4, 4-Fixture Angle Arm
30”3”
30”
69-3/16”
32”
32”
30”
156”
30” 30”
ACR6, 6-Fixture Angle Arm
NotesAngle iron crossarms can be used with other poles if ordered with the pole.
CATALOG
NUMBER
ARM EPA
(SQ. FT.)
WEIGHT
(LBS.)
ACR2 1.98 34.0
ACR3 3.12 54.0
ACR4 4.53 78.0
ACR5 5.95 103.0
ACR6 7.37 127.0
Projected area is for the crossarm only. The crossarm projected area is added to the luminaire projected area to get a total effective projected area (EPA).
CR8, 8-Fixture Crossarm
22'-0"
3'-0"3" Sched 40 pipe
CR5, 5-Fixture Crossarm
13'-0"
3'-0" 3" Sched 40 pipe
CR6, 6-Fixture Crossarm
16'-0"
3'-0" 3" Sched 40 pipe
CR7, 7-Fixture Crossarm
19'-0"
3'-0" 3" Sched 40 pipe
NotesTubular crosswarms can be used with other poles if ordered with the pole.
CATALOG
NUMBER
ARM EPA
(SQ. FT.)
WEIGHT
(LBS.)
ACR2 1.28 44.0
ACR3 2.45 65.0
ACR4 3.21 98.0
ACR5 4.17 116.0
ACR6 5.13 150.0
ACR7 6.10 176.0
ACR8 7.06 271.0
Options & Accessories
TUBULAR CROSSARMS FOR STEEL POLES
PRODUCT INFORMATION
Intended Use
For use on SPRTS sportslighting poles.
Intended Use
For use on SPRTS sportslighting poles.
5'-6"8" 25"
17-3/8"
25"
30"3"
30"
Options & Accessories
ANGLE IRON CROSSARMS FOR STEEL POLES
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com598
PO
LES Aluminum
SSASquare Straight Aluminum
Intended Use
Square straight aluminum
general purpose pole for up
to 35-foot mounting heights.
Construction
Shaft: Made from extruded
6063-T6 or 6061-T6 alumi-
num alloy, square tube is
uniform in cross-section
down length of shaft with
no taper.
Anchor base: Cast from
A356 aluminum alloy and
heat treated to T6 temper.
Base plate and shaft are
circumferentially welded
top and bottom. Anchor bolt
holes are recessed and are
covered by tamper-resistant
aluminum nut-cover discs
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced rect-
angular hand hole is located
18" above base. 4" poles have
2" x 4" hand hole; 5" and 6"
poles have 2.5" x 4" hand
hole. Hand-hole cover plate
made from aluminum alloy
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Bolt covers: Nut-cover discs
provided.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX. SHIP WT.
(LBS.)SSA 8 4C 8 4 x 8 0.125 16.5 12.6 9.9 300 8.5 - 9.625 3/4 x 18 x 3 32
SSA 10 4C 10 4x 10 0.125 11.5 8.6 6.5 230 8.5 - 9.625 3/4 x 18 x 3 37SSA 12 4C 12 4 x 12 0.125 12.4 9.2 6.9 160 8.5 - 9.625 3/4 x 18 x 3 40SSA 14 4C 14 4 x 14 0.125 9.3 6.7 4.8 120 8.5 - 9.625 3/4 x 18 x 3 50SSA 15 4C 15 4 x 15 0.125 8.0 5.6 3.9 100 8.5 - 9.625 3/4 x 18 x 3 52SSA 16 4C 16 4 x 16 0.125 6.9 4.7 3.1 90 8.5 - 9.625 3/4 x 18 x 3 54SSA 16 4G 16 4 x 16 0.188 11.8 8.5 6.2 130 8.5 - 9.625 3/4 x 30 x 3 74SSA 16 5G 16 5 x 16 0.188 15.0 11.1 7.5 280 10.5 - 11.5 3/4 x 30 x 3 83SSA 18 4C 18 4 x 18 0.125 4.9 3.0 1.7 70 8.5 - 9.625 3/4 x 18 x 3 57SSA 18 4G 18 4 x 18 0.188 9.2 6.4 4.4 100 8.5 - 9.625 3/4 x 30 x 3 80SSA 18 5G 18 5 x 18 0.188 16.8 12.2 8.9 230 10.5 - 11.5 3/4 x 30 x 3 91SSA 20 4C 20 4 x 20 0.125 3.3 1.7 0.5 40 8.5 - 9.625 3/4 x 18 x 3 62SSA 20 4G 20 4 x 20 0.188 7.0 4.6 2.9 80 8.5 - 9.625 3/4 x 30 x 3 85SSA 20 5G 20 5 x 20 0.188 13.6 9.5 6.6 180 10.5 - 11.5 3/4 x 30 x 3 107SSA 20 6G 20 6 x 20 0.188 22.0 15.9 11.6 230 12 - 13 1 x 36 x 4 155SSA 20 6J 20 6 x 20 0.250 30.4 22.6 17.0 300 12 - 13 1 x 36 x 4 202SSA 25 5G 25 5 x 25 0.188 7.2 4.2 2.0 110 10.5 - 11.5 3/4 x 30 x 3 130SSA 25 6G 25 6 x 25 0.188 13.2 8.6 5.4 180 12 - 13 1 x 36 x 4 180SSA 25 6J 25 6 x 25 0.250 19.7 13.8 9.5 250 12 - 13 1 x 36 x 4 224SSA 30 6G 30 6 x 30 0.188 7.0 3.4 0.8 130 12 - 13 1 x 36 x 4 210SSA 30 6J 30 6 x 30 0.250 12.2 7.5 4.1 170 12 - 13 1 x 36 x 4 258SSA 32 6J 32 6 x 32 0.250 9.7 5.4 2.3 160 12 - 13 1 x 36 x 4 272SSA 35 6J 35 6 x 35 0.250 6.4 2.6 - 200 12 - 13 1 x 36 x 4 294SSA 35 7J 35 6.75 x 35 0.250 7.6 3.1 - 150 14.625 1 x 36 x 4 290
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
4"C 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB18-04"G 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB30-05" 10.5" - 11.5" 3.25" 11.563" ABTEMPLATE PJ50046 AB30-06" 12" - 13" 4" 12.25" ABTEMPLATE PJ50044 AB36-07" 14.625" 4.125" 15" ABTEMPLATE PJ50130 AB36-0
Nut cover disc
Tapped 3/8”for ground connector
18"
A
C
B
Notes
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
599www.lithonia.com | 1-800-279-8041PSG10
PO
LESAluminumAluminum
SSCASquare Straight Cruciform Aluminum
Intended Use
Square straight cruciform
pole for up to 30-foot mount-
ing heights.
Construction
Shaft: Made from extruded
seamless 6000 series alloy
aluminum tubing, square
cruciform tube is uniform in
cross-section down length of
shaft with no taper.
Anchor base: Cast from
A356 aluminum alloy and
heat treated to T6 temper.
Base plate and shaft are
circumferentially welded
top and bottom. Anchor bolt
holes are recessed and are
covered by tamper-resistant
aluminum nut-cover discs.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced rect-
angular hand hole is located
18" above base. 2" x 4" hand-
hole cover plate made from
aluminum alloy.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Bolt covers: Nut cover discs
provided.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT. (IN. X IN.
X IN.)
APPROX. BOLT CIRCLE
(IN.)BOLT SIZE
SHIP WT. (LBS.)
SSCA 8 4G 8 4 x 8 0.188 30.2 23.5 18.6 350 8.5 - 9.625 3/4 x 18 x 4 45SSCA 10 4G 10 4 x 10 0.188 23.5 18 14.1 260 8.5 - 9.625 3/4 x 18 x 4 50SSCA 12 4G 12 4 x 12 0.188 18.4 13.9 10.7 260 8.5 - 9.625 3/4 x 18 x 4 56SSCA 15 4G 15 4 x 15 0.188 10.6 7.7 5.6 200 8.5 - 9.625 3/4 x 18 x 4 67SSCA 18 4G 18 4 x 18 0.188 7.2 4.9 3.2 200 8.5 - 9.625 3/4 x 18 x 4 77SSCA 18 6G 18 6 x 18 0.188 21.7 15.9 11.7 260 12 - 13 1 x 36 x 4 139SSCA 20 4G 20 4 x 20 0.188 5.8 3.6 2 100 8.5 - 9.625 3/4 x 18 x 4 84SSCA 20 6G 20 6 x 20 0.188 18.3 13 9.2 150 12 - 13 1 x 36 x 4 149SSCA 25 6G 25 6 x 25 0.188 11 6.8 3.7 150 12 - 13 1 x 36 x 4 175SSCA 30 6G 30 6 x 30 0.188 4.5 1.4 - 260 12 - 13 1 x 36 x 4 201
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
4" 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50131 AB18-06" 12" - 13" 4" 12.75" ABTEMPLATE PJ50132 AB36-0
Notes
B
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com600
AluminumP
OLE
S
RSARound Straight Aluminum
18”
Intended Use
Round straight aluminum
general purpose pole for up
to 30-foot mounting heights.
Construction
Shaft: One-piece extruded
6063-T6 aluminum alloy with
T6 temper. Circumferential
satin-brushed finish. Round
straight tube is uniform in
cross-section down length of
shaft with no taper.
Anchor base: Cast from A356
aluminum alloy and heat
treated to T6 temper. Base
plate and shaft are circum-
ferentially welded top and
bottom. The anchor base is
provided with slotted holes.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced 2" x
4" hand hole is located 18"
above base. (4.5" and 5"
poles have either 2" x 4" or 3"
x 5" hand hole; 6" poles have
a 3" x 5" hand hole). Cover
and attachment hardware
furnished.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Bolt covers: A356 bolt covers
included with anchor base
unless otherwise specified.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
NUMBER OF BOLTS
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE (IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)
4-BOLT BASE
RSA 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 6.5 - 8.25 3/4 x 18 x 3 22RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 6.5 - 8.25 3/4 x 18 x 3 26RSA 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 6.5 - 8.25 3/4 x 18 x 3 30
RSA 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.125 - 8.375 3/4 x 18 x 3 38RSA 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 6.5 - 8.25 3/4 x 18 x 3 35
RSA 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 7.125 - 8.375 3/4 x 18 x 3 42RSA 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.5 - 9.5 3/4 x 18 x 3 39RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.5 - 8.5 3/4 x 18 x 3 38
RSA 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.125 - 8.375 3/4 x 18 x 3 46RSA 16 4-5G 16 4.5 x 16 0.188 7.5 5.5 4.3 155 7.125 - 8.375 3/4 x 18 x 3 62
RSA 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 190 7.5 - 9.5 3/4 x 18 x 3 53
RSA 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48RSA 18 5E 18 5 x 18 0.156 6.1 4.6 3.5 175 7.5 - 9.5 3/4 x 18 x 3 58RSA 18 5G 18 5 x 18 0.188 8.0 6.8 4.7 225 7.5 - 9.5 3/4 x 18 x 3 68
RSA 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSA 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54RSA 20 5E 20 5 x 20 0.156 4.7 3.4 2.6 150 7.5 - 9.5 3/4 x 18 x 3 68RSA 20 5G 20 5.x 20 0.188 6.4 4.8 3.6 150 7.5 - 9.5 3/4 x 18 x 3 82RSA 20 6E 20 6.x 20 0.156 9.3 7.1 5.5 175 8.75 - 10.25 3/4 x 30 x 3 95
RSA 25 4-5G 25 4.5 x 25 0.188 1.3 - - 100 7.125 - 8.375 3/4 x 18 x 3 89RSA 25 6E 25 6 x 25 0.156 5.2 3.8 2.8 150 8.75 - 10.25 3/4 x 30 x 3 108RSA 25 6G 25 6.x 25 0.188 7.1 5.3 4.0 150 8.75 - 10.25 3/4 x 30 x 3 128RSA 30 6G 30 6 x 30 0.188 3.5 2.4 1.6 200 8.75 - 10.25 3/4 x 30 x 3 146
3-BOLT BASE
3RSA 8 3C 8 3 x 8 0.125 5.8 4.3 3.3 75 5.5 - 7 3/4 x 18 x 3 223RSA 10 3C 10 3 x 10 0.125 4.0 2.9 2.1 75 5.5 - 7 3/4 x 18 x 3 263RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 75 6.3125 - 7.375 3/4 x 18 x 3 263RSA 12 3C 12 3 x 12 0.125 2.7 1.8 1.2 75 5.5 - 7 3/4 x 18 x 3 303RSA 12 4C 12 4 x 12 0.125 5.8 4.2 3.1 150 6.3125 - 7.375 3/4 x 18 x 3 303RSA 12 5C 12 5 x 12 0.125 10.3 8 6.3 150 7.375 - 8.5 3/4 x 18 x 3 363RSA 14 3C 14 14 x 3 0.125 1.7 1.0 0 75 5.5 - 7 3/4 x 18 x 3 353RSA 14 4C 14 14 x 4 0.125 4.1 2.8 1.9 150 6.3125 - 7.375 3/4 x 18 x 3 353RSA 14 5C 14 14 x 5 0.125 7.9 6.0 4.7 150 7.375 - 8.5 3/4 x 18 x 3 393RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.3125 - 7.375 3/4 x 18 x 3 383RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 150 7.375 - 8.5 3/4 x 18 x 3 533RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.375 - 8.5 3/4 x 18 x 3 483RSA 20 5C 20 5 x 20 0.125 2.9 2.0 1.4 150 7.375 - 8.5 3/4 x 18 x 3 543RSA 20 5E 20 5 x 20 0.156 4.6 3.3 2.5 150 7.375 - 8.5 3/4 x 18 x 3 68
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
C
A
C
A
Notes
is located on opposite side of drilling. For special drillings, consult factory.
POLE DATA
NUMBER OF BOLTS
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
BBASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
4-BOLT BASE
4" 6.5" - 8.25" 3.25" 8.75" ABTEMPLATE PJ50057 AB18-04.5" 7" - 8.5" 3.25" 8.5" ABTEMPLATE PJ50040 AB18-05" 7.5" - 9.5" 3.25" 9.25" ABTEMPLATE PJ50058 AB18-06" 8.75" - 10.25" 3.50" 10.25" ABTEMPLATE PJ50059 AB30-0
3-BOLT BASE
3" 5.5" - 7" 3.25" 7.5" ABTEMPLATE PJ50125 AB18-04" 6.3125" - 7.375" 3.25" 8.875" ABTEMPLATE PJ50126 AB18-05" 7.375" - 8.5" 3.25" 10.25" ABTEMPLATE PJ50127 AB18-0
B
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
601www.lithonia.com | 1-800-279-8041PSG10
PO
LESAluminum
RSAORound Straight Aluminum withOMEROTM Decorative Base Cover
RSALPRound Straight Aluminum with
Low-Profile Base Cover
Intended Use
Round straight aluminum
general purpose pole for up
to 20-foot mounting heights.
Construction
Shaft: One-piece extruded
6063-T6 aluminum alloy with
T6 temper. Circumferential
satin-brushed finish. Round
straight tube is uniform in
cross-section down length of
shaft with no taper.
Anchor base: Cast from
A356 aluminum alloy and
heat treated to T6 temper.
Base plate and shaft are
circumferentially welded top
and bottom. RSAO: Base plate
bolt circle is 7.5". RSALP: The
anchor base is provided with
slotted holes.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with hex nut,
washer and leveling shims.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: Reinforced 2"x 5"
hand hole is located 18" above
base. Cover and attachment
hardware furnished.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
RSAO: Decorative base. Made
of die-cast aluminum the
decorative base slides over
the pole, matching a key slot
in the pole baseplate allow-
ing a reveal between the
baseplate and the decorative
base cover. The decorative
base cover is 17.5" tall which
is combined with the height
of the matching baseplate for
a total height of 20.25".
RSALP: Low-profile base
cover. Made of die-cast alu-
minum, the base slides over
the pole fitting over the pole,
baseplate for a smooth one-
piece design. The base cover
is 5" tall with a step contour
3-1/2" above the base.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
NUMBER OF BOLTS
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)
RSAO4-BOLT BASE
RSAO 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 7.5 3/4 x 18 x 3 22RSAO 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 7.5 3/4 x 18 x 3 26RSAO 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 7.5 3/4 x 18 x 3 30
RSAO 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.5 3/4 x 18 x 3 38RSAO 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 7.5 3/4 x 18 x 3 35
RSAO 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 7.5 3/4 x 18 x 3 42RSAO 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.5 3/4 x 18 x 3 39RSAO 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 7.5 3/4 x 18 x 3 38
RSAO 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.5 3/4 x 18 x 3 46RSAO 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46
RSAO 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSAO 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48
RSAO 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSAO 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54
RSALP4-BOLT BASE
RSALP 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 6.5 - 8.25 3/4 x 18 x 3 22RSALP 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 7.125 - 8.375 3/4 x 18 x 3 26RSALP 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 6.5 - 8.25 3/4 x 18 x 3 30
RSALP 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.125 - 8.375 3/4 x 18 x 3 38RSALP 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 7.5 - 9.5 3/4 x 18 x 3 35
RSALP 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 6.5 - 8.5 3/4 x 18 x 3 42RSALP 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.125 - 8.375 3/4 x 18 x 3 39RSALP 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 7.125 - 8.375 3/4 x 18 x 3 38
RSALP 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.5 - 9.5 3/4 x 18 x 3 46RSALP 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46
RSALP 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSALP 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48
RSALP 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSALP 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
RSAO Base Cover RSALP Base Cover
A
C
Notes
side drilling.
POLE DATA
NUMBER OF BOLTS
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
RSAO4-BOLT BASE
4" 7.5" 3.25" 13" ABTEMPLATE PJ50070 AB18-04.5" 7.5" 3.25" 8.5" ABTEMPLATE PJ50070 AB18-05" 7.5" 3.25" 9.25" ABTEMPLATE PJ50070 AB18-0
RSALP4-BOLT BASE
4" 6.5" - 8.25" 3.25" 8.75" ABTEMPLATE PJ50057 AB18-04.5" 7" - 8.5" 3.25" 8.5" ABTEMPLATE PJ50040 AB18-05" 7.5" - 8" 3.25" 7.5" ABTEMPLATE PJ50071 AB18-0
B
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com602
PO
LES Aluminum
RTARound Tapered Aluminum
Intended Use
Round tapered aluminum
general purpose pole for up
to 39-foot mounting heights.
Construction
Shaft: The shaft is spun
tapered from seamless
6063 alloy aluminum tubing
and heat treated to a T6
temper. Circumferential
satin-brushed finish. Round
in cross-section down length
of shaft and cone tapered to
the butt diameter.
Anchor base: Cast from
A356 aluminum alloy and
heat treated to T6 temper.
Base plate and shaft are
circumferentially welded top
and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: A nominal 3" x
5" or 4" x 6" reinforced flush
covered hand hole is centered
18" above the base.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Bolt covers: A356 bolt covers
included with anchor base
unless otherwise specified.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
NUMBEROF BOLTS
CATALOG NUMBER
NOM. MOUNT HT. (FT.)
POLE SHAFT SIZE (BASE IN. X
TOP IN. X FT.)
WALL THICKNESS
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE (IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX SHIP WT.
(LBS.)
4-BOLT BASE
RTA 20 5C 20 5 x 3 x 19.66 0.125 3.9 2.5 1.6 100 7.5 - 9.5 3/4 x18 x 3 62RTA 20 5G 20 5 x 3 x 19.66 0.188 7.4 5.2 3.8 100 7.5 - 9.5 3/4 x 18 x 3 72RTA 20 6G 20 6 x 4 x 19.66 0.188 12.2 9.2 7.2 214 9 - 10 3/4 x 30 x 3 107RTA 20 7E 20 7 x 4 x 19.66 0.156 15.0 11.4 9.0 256 9.875 - 11.25 1 x 36 x 4 103RTA 25 6E 25 6 x 4 x 24.66 0.156 5.3 3.6 2.6 114 9 - 10 3/4 x 30 x 3 106RTA 25 7E 25 7 x 4 x 24.66 0.156 9.5 7.0 5.4 162 9.875 - 11.25 1 x 36 x 4 120RTA 25 8E 25 8 x 4.5 x 24.66 0.156 14.2 10.9 8.5 220 11 - 12 1 x 36 x 4 130RTA 25 8G 25 8 x 4.5 x 24.66 0.188 18.0 13.8 10.9 261 11 - 12 1 x 36 x 4 153RTA 30 7E 30 7 x 4 x 29.66 0.156 5.5 3.8 2.7 111 9.875 - 11.25 1 x 36 x 4 135RTA 30 8E 30 8 x 4.5 x 29.66 0.156 9.4 7.0 5.3 151 11 - 12 1 x 36 x 4 150RTA 30 8G 30 8 x 4.5 x 29.66 0.188 12.4 9.4 7.3 179 11 - 12 1 x 36 x 4 175
RTA 30 10G 30 10 x 6 x 29.66 0.188 23.8 18.3 14.3 377 14.25 - 16.25 1 x 40 x 4 235RTA 35 8E 35 8 x 4.5 x 34.66 0.156 5.8 4.1 2.9 119 11 - 12 1 x 36 x 4 185RTA 35 8G 35 8 x 4.5 x 34.66 0.188 8.3 6.0 4.5 141 11 - 12 1 x 36 x 4 220RTA 35 8J 35 8 x 4.5 x 34.66 0.250 12.9 9.7 7.5 183 11 - 12 1 x 36 x 4 251
RTA 35 10G 35 10 x 6 x 34.66 0.188 17.9 13.6 10.4 295 14.25 - 16.25 1 x 40 x 4 268RTA 39 8G 39 8 x 4.5 x 38.66 0.188 5.6 3.9 2.7 122 11 - 12 1 x 36 x 4 250RTA 39 8J 39 8 x 4.5 x 38.66 0.250 9.7 7.1 5.4 158 11 - 12 1 x 36 x 4 280
RTA 39 10G 39 10 x 6 x 38.66 0.188 14.2 10.5 7.8 253 14.25 - 16.25 1 x 40 x 4 295RTA 39 10J 39 10 x 6 x 38.66 0.250 20.4 15.5 11.9 300 14.5 - 16 1-1/4 x 48 x 5 373
3-BOLT BASE
3RTA 8 4C 8 4 x 3 x 8 0.125 12.1 9.3 7.3 75 6.5 - 7.25 3/4 x 18 x 3 233RTA 10 4C 10 4 x 3 x 10 0.125 8.8 6.7 5.2 75 6.5 - 7.25 3/4 x 18 x 3 273RTA 12 4C 12 4 x 3 x 12 0.125 6.6 4.8 3.6 75 6.5 - 7.25 3/4 x 18 x 3 313RTA 14 4C 14 4 x 3 x 14 0.125 4.9 3.4 2.4 75 6.5 - 7.25 3/4 x 18 x 3 343RTA 16 4C 16 4 x 3 x 16 0.125 3.5 2.3 1.5 75 6.5 - 7.25 3/4 x 18 x 3 383RTA 16 5C 16 5 x 3 x 16 0.125 6.9 5.0 3.8 75 7.5 - 8.5 3/4 x 18 x 3 433RTA 18 5C 18 5 x 3 x 18 0.125 5.0 3.5 2.5 150 7.5 - 8.5 3/4 x 18 x 3 473RTA 18 5E 18 5 x 3 x 18 0.156 7.0 5.0 3.7 150 7.5 - 8.5 3/4 x 18 x 3 573RTA 20 5C 20 5 x 3 x 20 0.125 3.8 2.5 1.6 150 7.5 - 8.5 3/4 x 18 x 3 503RTA 20 5E 20 5 x 3 x 20 0.156 5.5 3.8 2.6 150 7.5 - 8.5 3/4 x 18 x 3 62
18”
C
A
C
A
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
POLE DATANUMBEROF BOLTS
SHAFT BASE SIZEBOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
4-BOLT BASE
5" 7.5" - 9.5" 3.25" 9.25" ABTEMPLATE PJ50032 AB18-06" 9" - 10" 3.50" 10" ABTEMPLATE PJ50033 AB30-07" 9.875" - 11.25" 4.125" 10.5" ABTEMPLATE PJ50034 AB36-08" 11" - 12" 4.25" 11.5" ABTEMPLATE PJ50035 AB36-0
10"G 14.25" - 16.25" 4.50" 14.5" ABTEMPLATE PJ50036 AB40-010"J 14.5" - 16" 5.00" 14.5" ABTEMPLATE PJ50063 AB48-0
3-BOLT BASE
4" 6.5" - 7.25" 3.25" 8.875" ABTEMPLATE PJ50128 AB18-05" 7.5" - 8.5" 3.25" 10.25" ABTEMPLATE PJ50129 AB18-0
B
Notes
(DMxx) side drilling.
specifications.
anchor bolts. Hand hole is located on opposite side of drill-ing. For special drillings, consult factory.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
603www.lithonia.com | 1-800-279-8041PSG10
Aluminum PO
LES
RTAURound Tapered Aluminum with Upsweep Mast Arms
Intended Use
Round tapered aluminum
roadway pole with upsweep
mast arm(s) for up to 40-foot
mounting heights including
rise of arm.
Construction
Shaft: Shaft is spun tapered
from seamless 6063 alloy
aluminum tubing and heat
treated to a T6 temper.
Circumferential satin-brushed
finish. Round in cross-section
down length of shaft and cone
tapered to the base diameter.
Arm: Body of the mounting
arm is tapered aluminum
alloy 6063-T6 tube with
2-3/8 " OD (2" NPS) pipe size
at luminaire end. The pole
end of the arm is welded to
an aluminum alloy 6063-T6
mounting plate.
Mounting: Arm mounting
plate bolts to the shaft using
stainless steel bolts, nuts and
washers. A grommet is pro-
vided for the 1-1/4" diameter
wiring hole between the pole
shaft and the bracket arm.
Anchor base: Cast from
A356 aluminum alloy and
heat treated to T6 temper.
Base plate and shaft are
circumferentially welded top
and bottom.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Provision located
inside hand hole rim. Ground-
ing hardware is not included
(provided by others).
Hand hole: A nominal 3" x
5" or 4" x 6" reinforced flush
covered hand hole is centered
18" above the base.
Hardware: Stainless steel.
Top cap: Removable top cap
provided.
Bolt covers: A356 bolt covers
included with anchor base
unless otherwise specified.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
6" 9" - 10" 4.75" 9.75" ABTEMPLATE PJ50033 AB30-07" 10" - 11" 4.75" 10.5" ABTEMPLATE PJ50034 AB36-08" 11" - 12" 4.75" 11.25" ABTEMPLATE PJ50035 AB36-0
10" 14" - 15" 5.25" 14" ABTEMPLATE PJ50481 AB481-0
18”
A
B
Notes
upsweep arm.
consult factory.
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
TECHNICAL INFORMATION
CATALOG NUMBERNOM.
MOUNT. HT. (FT.)
MTG. ARM
LENGTH (FT.)
POLE SHAFT SIZE (BASE IN. X
TOP IN.)
WALL THICK.
(IN.)
EPA FT2
W/1.3 GUST UP TO 100 MPH (PER
ARM)
MAX. WT.
(LBS.)
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)
SINGLE -ARM POLES
RTAU 20 6E BMA US4 20 4 6 x 4.5 0.156 2 65 9" - 10" 3/4 x 30 x 3 90RTAU 20 6G BMA US6 20 6 6 x 4.5 0.188 2 65 9" - 10" 3/4 x 30 x 3 100RTAU 20 6G BMA US8 20 8 6 x 4.5 0.188 1.74 65 9" - 10" 3/4 x 30 x 3 105RTAU 25 7E BMA US4 25 4 7 x 4.5 0.156 2 65 10" - 11" 1 x 36 x 4 120RTAU 25 7G BMA US6 25 6 7 x 4.5 0.188 2 65 10" - 11" 1 x 36 x 4 140RTAU 25 8E BMA US8 25 8 8 x 4.5 0.156 1.74 65 11" - 12" 1 x 36 x 4 135RTAU 30 8E BMA US4 30 4 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 150RTAU 30 8G BMA US6 30 6 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 170RTAU 30 8G BMA US8 30 8 8 x 4.5 0.188 1.74 65 11" - 12" 1 x 36 x 4 175RTAU 35 8G BMA US4 35 4 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 190RTAU 35 8J BMA US6 35 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 240RTAU 35 8J BMA US8 35 8 8 x 4.5 0.250 1.74 65 11" - 12" 1 x 36 x 4 245RTAU 40 8J BMA US4 40 4 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 255RTAU 40 8J BMA US6 40 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 260RTAU 40 10G BMA US8 40 8 10 X 6 0.188 1.74 65 14" - 15" 1 x 48 x 4 265
DOUBLE -ARM POLES
RTAU 20 6G BMA 2US4 20 4 6 x 4.5 0.188 2 65 9" - 10" 3/4 x 30 x 3 105RTAU 20 7E BMA 2US6 20 6 7 x 4.5 0.156 2 65 10" - 11" 1 x 36 x 4 120RTAU 20 7G BMA 2US8 20 8 7 x 4.5 0.188 1.74 65 10" - 11" 1 x 36 x 4 140RTAU 25 8E BMA 2US4 25 4 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 140RTAU 25 8E BMA 2US6 25 6 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 145RTAU 25 8G BMA 2US8 25 8 8 x 4.5 0.188 1.74 65 11" - 12" 1 x 36 x 4 170RTAU 30 8G BMA 2US4 30 4 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 175RTAU 30 8J BMA 2US6 30 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 215RTAU 30 8J BMA 2US8 30 8 8 x 4.5 0.250 1.74 65 11" - 12" 1 x 36 x 4 220RTAU 35 10G BMA 2US4 35 4 10 x 6 0.188 2 65 14" - 15" 1 x 48 x 4 270RTAU 35 10G BMA 2US6 35 6 10 x 6 0.188 2 65 14" - 15" 1 x 48 x 4 280RTAU 35 10J BMA 2US8 35 8 10 x 6 0.250 1.74 65 14" - 15" 1 x 48 x 4 350RTAU 40 10L BMA 2US4 40 4 10 x 6 0.219 2 65 14" - 15" 1 x 48 x 4 320RTAU 40 10L BMA 2US6 40 6 10 x 6 0.219 2 65 14" - 15" 1 x 48 x 4 325RTAU 40 10J BMA 2US8 40 8 10 x 6 0.250 1.74 65 14" - 15" 1 x 48 x 4 365
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com604
PO
LES Aluminum
RSAHRound Straight Aluminum, Hinged
Intended Use
Round straight aluminum
hinged pole with 10-to 20-
foot mounting heights. Good
application where mainte-
nance access is limited.
Construction
Shaft: One-piece extruded
6063-T6 aluminum alloy with
T6 temper. Circumferential
satin-brushed finish. Round
straight tube is uniform in
cross-section down length of
shaft with no taper.
Hinged anchor base: Cast
from A356 aluminum
alloy and heat treated to T6
temper. Shaft and tilting
section of the hinged base
are circumferentially welded
top and bottom. The tilting
and anchored sections of
the hinged base are joined
by a 3/4" diameter solid
aluminum pivot rod. The
tilting section of the hinged
base is held in a vertical
position by three 1/2"-13 x
2" stainless steel hex head
bolts that attach to stainless
steel inserts cast into the
aluminum base.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Anchor base
plate is tapped for 3/8"-16
UNC grounding bolt (pro-
vided by others).
Hand hole: Available as an
option; Located 90° to the
right of the hinge.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes cast-
aluminum two-piece cover.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS)RSAH 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 8.5 - 10 3/4 x 18 x 3 43RSAH 14 4C 14 4 x 14 0.125 4.4 3.0 2.1 100 8.5 - 10 3/4 x 18 x 3 50RSAH 14 5E 14 5 x 14 0.156 10.6 8.2 6.5 100 8.5 - 10 3/4 x 18 x 3 66RSAH 16 4C 16 4 x 16 0.125 3.1 1.9 1.2 100 8.5 - 10 3/4 x 18 x 3 54RSAH 16 5C 16 5 x 16 0.125 6.2 4.7 3.6 100 8.5 - 10 3/4 x 18 x 3 60RSAH 16 6E 16 6 x 16 0.156 13.8 10.7 8.5 100 8.5 - 10 3/4 x 30 x 3 88RSAH 18 5C 18 5 x 18 0.125 4.5 3.3 2.5 130 8.5 - 10 3/4 x 18 x 3 65RSAH 18 5G 18 5 x 18 0.188 8.2 6.2 4.9 130 8.5 - 10 3/4 x 18 x 3 90RSAH 20 5C 20 5 x 20 0.125 3.2 2.2 1.6 130 8.5 - 10 3/4 x 18 x 3 69RSAH 20 5G 20 5 x 20 0.188 6.4 4.8 3.7 130 8.5 - 10 3/4 x 18 x 3 97RSAH 20 6G 20 6 x 20 0.188 11.7 9.0 7.1 130 8.5 - 10 3/4 x 30 x 3 110
POLE DATASHAFT BASE
SIZEBOLT CIRCLE
ABOLT PROJECTION
BBASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
4" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50060 AB18-05" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50061 AB18-06" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50062 AB30-0
Notes
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
Hinge base poles without handholes will be drilled for the first fixture 90 degrees to the right of the hinge. When a handhole is specified as an adder, the first fixture drilling will be 90 degreees to the right of the handhole. If the customer has different fixture drilling orientation requirements, please specify that on the purchase order.
A
C
3/4" Solid aluminum pivot rod
B
Two-piece cast aluminum cover
Trapped 3/8" - 16 for ground connector
Two piece castAluminum cover
Hinge direction "A" side of pole
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
605www.lithonia.com | 1-800-279-8041PSG10
PO
LESAluminum
SSAHSquare Straight Aluminum, Hinged
Intended Use
Square straight aluminum
hinged pole with 10- to 20-
foot mounting heights. Good
application where mainte-
nance access is limited.
Construction
Shaft: Made from extruded
6063-T6 aluminum alloy,
square tube is uniform in
cross-section down length of
shaft with no taper.
Hinged anchor base: Cast
from A356 aluminum
alloy and heat-treated to
T6 temper. Shaft and tilting
section of the hinged base
are circumferentially welded
top and bottom. The tilting
and anchored sections of
the hinged base are joined
by a 3/4" diameter solid
aluminum pivot rod. The
tilting section of the hinged
base is held in a vertical
position by three 1/2"-13 x
2" stainless steel hex-head
bolts that attach to stainless
steel inserts cast into the
aluminum base.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Grounding: Anchor base
plate is tapped for 3/8"-16
UNC grounding bolt (pro-
vided by others).
Hand hole: Available as an
option; located 90° to the
right of the hinge.
Hardware: Stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes cast-
aluminum two-piece cover.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
WALL THICK.
(IN.)
80 MPH
90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X
IN.)
APPROX. SHIP WT.
(LBS.)SSAH 10 4C 10 4 x 10 0.125 13.1 9.9 7.5 100 8.5 - 10 3/4 x 18 x 3 48SSAH 12 4C 12 4 x 12 0.125 9.6 7.0 5.1 100 8.5 - 10 3/4 x 18 x 3 53SSAH 14 4C 14 4 x 14 0.125 7.0 4.9 3.3 100 8.5 - 10 3/4 x 18 x 3 57SSAH 15 4C 15 4 x 15 0.125 6.0 4.0 2.6 100 8.5 - 10 3/4 x 18 x 3 60SSAH 16 4C 16 4 x 16 0.125 5.0 3.2 1.9 100 8.5 - 10 3/4 x 18 x 3 62SSAH 16 4G 16 4 x 16 0.188 8.9 6.2 4.3 150 8.5 - 10 3/4 x 30 x 3 86SSAH 18 4C 18 4 x 18 0.125 3.4 1.8 0.7 100 8.5 - 10 3/4 x 18 x 3 67SSAH 18 4G 18 4 x 18 0.188 6.8 4.5 2.9 100 8.5 - 10 3/4 x 30 x 3 93SSAH 18 5G 18 5 x 18 0.188 12.6 8.8 6.1 150 9.312 - 10 3/4 x 30 x 3 108SSAH 20 4G 20 4 x 20 0.188 5.0 3.0 1.6 150 8.5 - 10 3/4 x 30 x 3 100SSAH 20 5G 20 5 x 20 0.188 9.9 6.6 4.2 175 9.312 - 10 3/4 x 30 x 3 117
POLE DATA
SHAFT BASE SIZE
BOLT CIRCLE
A
BOLT PROJECTION
B
BASE SQUARE
CTEMPLATE DESCRIPTION
ANCHOR BOLT DESCRIPTION
4"C 8.5" - 10" 3.5" 11.688" ABTEMPLATE PJ50055 AB18-04"G 8.5" - 10" 3.5" 11.688" ABTEMPLATE PJ50055 AB30-05" 9.312" - 10" 3.5" 11.688" ABTEMPLATE PJ50056 AB30-0
B
Two-piece cast aluminum cover
Notes
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Hinge base poles without handholes will be drilled for the first fixture 90 degrees to the right of the hinge. When a handhole is specified as an adder, the first fixture drilling will be 90 degreees to the right of the handhole. If the customer has different fixture drilling orientation requirements, please specify that on the purchase order.
C
A
3/4" Solid aluminum pivot rod
Hinge direction "A" side of pole
Trapped 3/8" - 16 for ground connector
Two-piece castaluminum cover
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com606
PO
LES Fiberglass
Notes
side drilling.
RTFDBRound Tapered Fiberglass, Direct Burial
Intended Use
Round tapered direct-burial
(embedded) fiberglass gen-
eral purpose pole for up to
35-foot mounting heights.
Construction
Shaft: Reinforced composite
shaft incorporating "E" type
fiberglass and pigmented,
UV inhibiting, thermosetting
polyester resin. Shaft is paint-
ed with a polyurethane top
coat providing a minimum
1.5 mil dry film thickness and
smooth surface finish.
Hand hole: Standard 2-1/2"
x 5" hand hole opening with
non-metallic oval shaped
covers secured with vandal-
resistant stainless steel 1/4"
socket head screws.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top cap
provided with drill-mount poles.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION EPA (FT2) WITH 1.3 GUSTCATALOG
NUMBERNOM. MOUNT.
HT. (FT.)POLE SHAFT SIZE
(BASE IN. X TOP IN. X FT.)80 MPH 90 MPH 100 MPH
MAX. WT. (LBS.)
APPROX. SHIP WT. (LBS.)
RTFDB 18 6X 14 6.5 x 4.1 x 18 14.0 10.4 7.9 150 34RTFDB 20 6-6X 16 6.7 x 4.1 x 20 10.0 7.4 5.5 100 38RTFDB 24 6-7X 20 6.7 x 4.1 x 24 8.2 5.8 4.1 150 46RTFDB 30 8-3X 25 8.2 x 4.5 x 30 6.2 4.7 3.6 100 71RTFDB 30 8-4X 25 8.4 x 4.7 x 30 14.5 11.2 8.9 200 98RTFDB 35 8-4X 30 8.4 x 4.7 x 35 10.5 8.0 6.2 200 116RTFDB 35 8-5X 30 8.5 x 4.9 x 35 14.8 11.4 9.0 300 153
RTFDB 41 11-8X 35 11.8 x 6.4 x 41 14.3 10.8 7.8 300 218
INSTALLATION NOTES: Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
18"
24"
Hand hole
Finish grade
Wiring access
PRODUCT INFORMATIONPRODUCT INFORMATION Fiberglass
RTFRound Tapered Fiberglass
Intended Use
Round tapered fiberglass
general purpose pole for up
to 45 foot mounting heights.
Construction
Shaft: Reinforced composite
shaft incorporating "E" type
fiberglass and pigmented,
UV inhibiting, thermoset-
ting polyester resin. Shaft is
painted with a polyurethane
top coat providing a mini-
mum 1.5 dry film thickness
and smooth surface finish.
Anchor base: Heavy-duty
metal base plate is perma-
nently bonded to the outside
of the fiberglass shaft.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Hand hole: Standard 2-1/2"
x 5" hand hole opening with
non-metallic oval shaped
covers secured with vandal-
resistant stainless steel 1/4"
socket head screws.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Not included;
Available as an optional
accessory.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information see page 588 .For additional product information, visit www.lithonia.com.
B
18”
Notes
side drilling.
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
TECHNICAL INFORMATION EPA (FT2) WITH 1.3 GUSTCATALOG
NUMBERNOM. MOUNT.
HT. (FT.)POLE SHAFT SIZE (BASE
IN. X TOP IN. X FT.)80 MPH 90 MPH
100 MPH
MAX. WT.
BOLT CIRCLE (IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX. SHIP WT. (LBS.)
RTF 10 5-4X 10 5.4 x 4.1 x 10 19.0 14.6 11.4 150 8 5/8 x 21 x 3 23RTF 12 5-6X 12 5.6 x 4.1 x 12 16.0 12.1 9.3 150 8.5 5/8 x 21 x 3 28RTF 14 5-9X 14 5.9 x 4.1 x 14 14.0 10.4 7.9 150 8.5 5/8 x 21 x 3 32RTF 16 6-1X 16 6.1 x 4.1 x 16 10.0 7.4 5.5 100 8.5 5/8 x 21 x 3 36RTF 20 6-6X 20 6.6 x 4.1 x 20 8.2 5.8 4.1 100 9.5 5/8 x 21 x 3 45RTF 20 7-3X 20 7.3 x 4.6 x 20 14.4 11.1 8.9 200 11.5 1 x 36 x 4 62RTF 25 6-7X 25 6.7 x 4.1 x 25 5.4 3.4 2.0 100 9.5 5/8 x 21 x 3 55RTF 25 7-3X 25 7.3 x 4.6 x 25 9.6 7.3 5.7 200 11.5 1 x 36 x 4 75RTF 30 8-4X 30 8.4 x 4.7 x 30 11.2 8.5 6.7 100 11.5 1 x 36 x 4 106RTF 30 8-5X 30 8.5 x 4.9 x 30 15.6 12.0 9.5 200 11.5 1 x 36 x 4 140
RTF 30 10-5X 30 10.5 x 6.6 x 30 28.7 22.4 17.4 300 14.5 1-1/4 x 42 x 6 202RTF 35 8-4X 35 8.4 x 4.7 x 35 5.5 3.8 2.7 100 11.5 1 x 36 x 4 125RTF 35 8-5X 35 8.5 x 4.9 x 35 8.5 6.2 4.7 200 11.5 1 x 36 x 4 161
RTF 35 11-2X 35 11.2 x 6.6 x 35 21.8 16.6 12.5 300 15 1-1/4 x 42 x 6 248RTF 40 11-7X 40 11.7 x 6.2 x 40 6.4 4.3 2.4 300 15.5 1-1/4 x 42 x 6 165RTF 40 11-8X 40 11.8 x 6.4 x 40 12.2 8.8 6.0 300 15.5 1-1/4 x 42 x 6 227
RTF 40 12X 40 12.0 x 6.9 x 40 25.8 19.3 14.3 300 15.5 1-1/4 x 42 x 6 317RTF 45 11-7X 45 11.7 x 6.2 x 45 3.9 2.2 0.6 300 15.5 1-1/4 x 42 x 6 183RTF 45 11-9X 45 11.9 x 6.6 x 45 15.2 10.9 7.6 300 15.5 1-1/4 x 42 x 6 295
For pole data, see page 607.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
607www.lithonia.com | 1-800-279-8041PSG10
PO
LESFiberglass
SSFSquare Straight Fiberglass
Intended Use
Square straight fiberglass
general purpose pole for up
to 30-foot mounting heights.
Construction
Shaft: Reinforced composite
shaft incorporating "E" type
fiberglass and pigmented,
UV-inhibiting, thermoset-
ting polyester resin. Shaft
is formed by the pultrusion
process with fiberglass
strands traversing the length
of the pole.
Anchor base: Heavy-duty
metal base plate is perma-
nently bonded to the outside
of the fiberglass shaft.
Anchor bolts: Fabricated
from carbon steel bar with
minimum-yield strength of
55,000 psi. Bolts have an "L"
bend on lower end and are
galvanized a minimum of 12
inches on the threaded end
per ASTM A-153. Each anchor
bolt is furnished with two hex
nuts and two flat washers.
Hand hole: Standard 2-1/2"
x 5" hand hole opening with
non-metallic oval-shaped
covers secured with vandal-
resistant stainless steel 1/4"
socket-head screws.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Top cap: Removable top
cap provided with drill-
mount poles.
Base cover: Includes full-base
cover finished to match pole.
Finish: Must specify finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT. HT. (FT.)
POLE SHAFT SIZE (IN. X FT.)
80 MPH 90 MPH100
MPH
MAX. WT.
(LBS.)
BOLT CIRCLE
(IN.)
BOLT SIZE (IN. X IN. X IN.)
APPROX. SHIP WT.
(LBS.)SSF 6 4X 6 4 x 6 20.0 20.0 20.0 150 8 5/8 x 21 x 3 18SSF 8 4X 8 4 x 8 20.0 20.0 20.0 150 8 5/8 x 21 x 3 23
SSF 10 4X 10 4 x 10 20.0 20.0 16.1 150 8 5/8 x 21 x 3 27SSF 12 4X 12 4 x 12 20.0 16.4 12.8 150 8 5/8 x 21 x 3 31SSF 14 4X 14 4 x 14 14.2 10.7 8.2 150 8 5/8x 21 x 3 35SSF 16 4X 16 4 x 16 11.9 8.8 6.5 150 8 5/8 x 21 x 3 39SSF 20 4X 20 4 x 20 8.3 5.8 4.0 150 8 5/8 x 21 x 3 47SSF 20 5X 20 5 x 20 14.9 11.1 8.4 300 11 1 x 36 x 4 102SSF 25 4X 25 4 x 25 5.0 3.0 1.5 150 8 5/8 x 21 x 3 57SSF 25 5X 25 5 x 25 10.6 7.6 5.4 300 11 1 x 36 x 4 125SSF 30 5X 30 5 x 30 5.7 3.4 1.7 300 11 1 x 36 x 4 148
SSF 30 5XHD 30 5 x 30 8.6 5.1 2.6 300 11 1 x 36 x 4 164
SSF POLE DATASHAFT BASE
SIZEBOLT CIRCLE
ABOLT PROJECTION
BBASE SQUARE
CTEMPLATE
DESCRIPTIONANCHOR BOLT DESCRIPTION
4" 8" 3" 7.41" ABTEMPLATE PJ50123 AB21-05" 11" 4" 11.125" ABTEMPLATE PJ50124 AB36-0
A
13/16” dia. hole
C
SSF 4" Shaft
A
1-1/4” x 2” slot
C
SSF 5" Shaft
B
Notes
INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
RTF POLE DATASHAFT BASE
SIZEBOLT CIRCLE
ABOLT PROJECTION
BBASE SQUARE
CTEMPLATE
DESCRIPTION5.4" 8" 3" 7.75" PJ50108
5.6" 8.5" 3" 8.125" PJ50109
5.9" 8.5" 3" 8.125" PJ50110
6.1" 8.5" 3" 8.125" PJ50111
6.6" 9.5" 3" 8.8" PJ50112
6.7" 9.5" 3" 8.8" PJ50113
7.3" 11.5" 4" 11" PJ50114
8.4" 11.5" 4" 11" PJ50115
8.5" 11.5" 4" 11" PJ50116
10.5" 14.5" 4" 13.3" PJ50117
11.2" 15" 4" 13.5" PJ50118
11.7" 15.5" 4" 14" PJ50119
11.8" 15.5" 4" 14" PJ50120
11.9" 15.5" 4" 14" PJ50121
12.0" 15.5" 4" 14" PJ50122
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com608
PO
LES Concrete
STCSquare Tapered Concrete
Intended Use
Square tapered direct-bury
(embedded) concrete pole
for up to 40-foot mounting
heights.
Construction
Shaft: Concrete mix has a
minimum 28-day compres-
sive strength of 8500 psi and
conforms with ASTM-C150.
Prestressing steel reinforce-
ment is uncoated 7-wire,
stress-relieved strand per
ASTM-A416. Steel spiral
reinforcement conforms to
ASTM-A82 and is not less
than .120-inch (11-gauge)
diameter with a maximum
pitch of 6 inches. Poles have
a continuous taper of 0.165
inches per foot.
Grounding: An 18" long, #4
stranded copper pigtail, con-
nected to reinforced strand,
is provided at pole top and at
cable entrance below grade.
Hand hole: A 3" x 5" hand
hole is located 24" above
ground line and a 2-1/2" x 7"
or larger conduit entrance
is located 18" below ground
line. Inserts for the hand
hole and conduit entrance
are non-corrosive and
weatherproof. Hand-hole
frames and covers conform to
ASTM-B240.
Hardware: Fasteners are
high-strength galvanized,
zinc-plated or stainless steel.
Finish: Natural concrete finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUSTCATALOG
NUMBERNOM. MOUNT.
HT. (FT.)POLE SHAFT SIZE
(BASE IN. X TOP IN. X FT.)80 MPH 90 MPH 100 MPH
APPROX. SHIP WT. (LBS.)
STC 20 7-24X 15 7.24 x 4.0 x 20 22 16 13 680STC 20 9-24X 16 9.24 x 6.0 x 20 48 37 29 1,110STC 24 6-40X 20 6.4 x 6.4 x 24 3.5 3.5 3.5 917STC 25 8-05X 20 8.05 x 4.0 x 25 21 16 12 985
STC 25 10-05X 20 10.05 x 6.0 x 25 44 34 26 1,530STC 30 8-86X 25 8.86 x 4.0 x 30 20 15 11 1350
STC 30 10-86X 25 10.86 x 6.0 x 30 49 33 28 2,000STC 35 9-67X 29 9.67 x 4.0 x 35 17 12 8 1,800
STC 35 11-67X 29 11.67 x 6.0 x 35 43 32 24 2540STC 35 6-40X 30 6.4 x 6.4 x 35 3.5 N/A N/A 1,337STC 35 7-25X 30 7.25 x 7.25 x 35 3.5 3.5 N/A 1,685
STC 36 8X 30 8.0 x 8.0 x 36 3.5 3.5 3.5 2,145STC 40 12-48X 34 12.48 x 6.0 x 40 42 30 22 3,130STC 45 13-29X 38 13.29 x 6.0 x 45 41 31 22 3,795
STC 46 8X 40 8.0 x 8.0 x 46 3.5 N/A N/A 2,740STC 47 9-25X 40 9.25 x 9.25 x 47 3.5 3.5 N/A 3,813
INSTALLATION NOTES: Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
3” x 5” hand holewith cover
Finish grade
Pigtail
Cast in 1-1/2”hole @ 45°
24”
18”
Notes
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
609www.lithonia.com | 1-800-279-8041PSG10
PO
LESConcrete
SPRTCRound Tapered Concrete Sportslighting
Intended Use
Round tapered direct bury
(embedded) concrete sports
lighting pole for up to 100
foot mounting heights.
Construction
Shaft: Concrete mix has a
minimum 28-day compres-
sive strength of 11,000 PSI
and conforms with ASTM-
C150. Prestressing steel
reinforcement is uncoated
7-wire, stress relieved strand
per ASTM-A416. Steel spiral
reinforcement conforms to
ASTM-A82 and is not less
than .203 (5-gauge wire)
diameter. Poles have a
continuous taper of 0.216
inches per foot. Poles are
centrifugally spun and round
in cross-section with a hol-
low center.
Grounding: A continuous
solid or stranded copper
ground wire is cast into the
pole. Wire terminates at
top of pole to accept a 1/2"
x24" lightning rod. Copper
coupling, approximately 12"
below grade, provides a 1/2 "
tapped insert at pole face for
grounding hardware.
Hand hole: 4" x 8" hand hole
is located 24" above ground
line. 4" x 8" conduit entrance
is located 18" below ground
line. A 2-1/2" x 8" reinforced
hand hole with flush cover
is located at cage/crossarm
locations. 1-1/2" coupling
wire inlet/outlet is located
opposite this hand hole.
Inserts for hand hole and
conduit entrance are non-
corrosive and weatherproof.
Hand-hole frames and covers
conform to ASTM-B240.
Hardware: Fasteners are
high-strength galvanized or
zinc-plated or stainless steel.
Finish: Natural concrete finish.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
CATALOG NUMBERNOM.
MOUNT. HT. (FT.)
POLE SHAFT SIZE (BASE IN. X TOP IN.
X FT.)80 MPH
MAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
APPROX. SHIP WT.
(LBS.)SPRTC C6 45 7-17 38 16.47 x 6.75 x 45 31 620 24 480 18 360 3,400SPRTC C5 45 7-17 38 16.47 x 6.75 x 45 39 780 30 600 23 460 3,400SPRTC C4 45 7-17 38 16.47 x 6.75 x 45 52 1,040 40 800 31 589 3,450SPRTC C4 60 7-20 50 19.71 x 6.75 x 60 47 893 35 665 26 520 5,450SPRTC C2 60 9-22 50 21.78 x 8.82 x 60 85 1,615 65 1,235 48 912 7,950SPRTC H1 60 9-22 50 21.78 x 8.82 x 60 138 2,622 101 1,919 80 1,520 8,100SPRTC C3 70 9-24 60 23.94 x 8.82 x 70 56 1,064 42 798 32 608 9,900SPRTC C1 70 9-24 60 23.94 x 8.82 x 70 90 1,710 69 1,311 52 988 10,100
SPRTC H2 70 10-24 60 23.94 x 8.82 x 70 139 2,641 103 1,957 81 1,539 10,400SPRTC C2 80 9-26 68 26.1 x 8.82 x 80 63 1,197 45 855 34 646 12,300SPRTC C1 80 9-26 68 26.1 x 8.82 x 80 85 1,445 65 1,105 48 816 12,300
SPRTC H2 80 10-26 68 26.1 x 8.82 x 80 136 2,584 101 1,919 79 1,501 12,800SPRTC C2 90 9-28 77 28.26 x 8.82 x 90 54 1,026 39 741 28 532 14,850SPRTC C1 90 9-28 77 28.26 x 8.82 x 90 78 1,482 56 1,064 42 798 14,950
SPRTC H2 90 10-28 77 28.26 x 8.82 x 90 132 2,508 97 1,843 75 1,425 15,350SPRTC C1 105 9-32 91 31.5 x 8.82 x 105 70 1,330 49 931 35 665 19,250SPRTC H1 105 9-32 91 31.5 x 8.82 x 105 99 1,881 74 1,406 54 1,026 19,450
SPRTC H3 105 11-34 91 33.68 x 11.0 x 105 144 2,736 105 1,995 80 1,520 22,050SPRTC C1 115 9-34 100 33.66 x 8.82 x 115 65 1,235 45 855 31 589 22,350SPRTC H1 115 9-34 100 33.66 x 8.82 x 115 96 1,824 70 1,330 50 950 22,550
SPRTC H2 115 10-34 100 33.66 x 8.82 x 115 125 2,375 91 1,729 69 1,311 22,800
INSTALLATION NOTES: Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
1/2” ground coupling at 6” below groundline
24"
18"
Cast in 4" x 8" hand-holeframe and cover
Cast in 4" x 8" slot
Notes
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com610
PO
LES Options & Accessories
ANGLE IRON CROSSARMS
ORDERING INFORMATIONORDERING INFORMATION
ORDERING INFORMATION
Notes1 Angle iron crossarms can be used with other poles if ordered with the pole.
Notes1 Pre-wired tubular crossarms can be used with other poles if ordered with the pole.
CATALOG NUMBER
ARM EPA (SQ. FT.)WEIGHT (LBS.)
ACRCW2 1.80 50.0
ACRCW3 3.00 86.0
ACRCW4 4.50 121.0
ACRCW5 5.70 157.0
ACRCW6 7.00 193.0
CATALOG NUMBER
ARM EPA (SQ. FT.)WEIGHT (LBS.)
SPXCW2 1.00 23.5
SPXCW3 1.80 40.0
SPXCW4 2.50 56.5
SPXCW5 3.20 73.0
SPXCW6 3.90 89.5
PRE-WIRED TUBULAR CROSSARMS
PRODUCT INFORMATION Options & Accessories
Concrete or Wood Sportslighting Poles
Concrete or Wood Sportslighting Poles
Intended Use
For use on round, tapered con-
crete or wood sportslighting
poles. Projected area is for the
crossarm only. The crossarm
projected area is added to the
luminaire projected area to
get a total effective projected
area (EPA).
Intended Use
For use on round, tapered
concrete or wood sportslight-
ing poles. Projected area is for
the crossarm only. The cros-
sarm projected area is added
to the luminaire projected
area to get a total effective
projected area (EPA). Use
in conjunction with CV3P
luminaire options.
8’6" 4’3"
Pole and mounting hardware1
3.5" x 5.0" x 0.25" angle(8.9 x 12.7 x .64 angle) 2’6"
(6.6)6"
6.5"
3.5" x 5.0" x 0.25" angle2’6" 6.0"
6’ 1’9"6.5"
Pole and mounting hardware1Pole and mounting hardware1
ACRCW2, 2-Fixture Angle Arm ACRCW3, 3-Fixture Angle Arm
3.5" x 5.0" x 0.25" angle 6.0"
3’6" 1’9"6.5"
ACRCW4, 4-Fixture Angle Arm
ACRCW5, 5-Fixture Angle Arm ACRCW6, 6-Fixture Angle Arm
3.5" x 5.0" x 0.25" angle 2’6" 6.0"
11’4’3"
6.5"
Pole and mounting hardware1 Pole and mounting hardware1
3.5" x 5.0" x 0.25" angle 2’6" 6.0"
13’6" 6’9"6.5"
SPXCW2, 2-Fixture Angle Arm SPXCW3, 3-Fixture Angle Arm SPXCW4, 4-Fixture Angle Arm
Pole and mounting hardware1Gusset (4 places)
6.0"
3’6" 1’9"6.5"
2.5" Sched. 40 pipe(2.88 OD)
Pole and mounting hardware1Gusset (4 places)
2’6" 6.0"
6’ 1’9"6.5"
2.5" Sched. 40 pipe(2.88 OD)
Pole and mounting hardware1Gusset
(4 places)2’6" 6.0"
8’6" 4’3"6.5"
SPXCW5, 5-Fixture Angle Arm SPXCW6, 6-Fixture Angle Arm
Gusset(4 places) 2’6" 6.0"
13’6" 6’9"6.5"
3.5" x 5.0" x 0.25" angle
Pole and mounting hardware1Gusset
(4 places) 2’6" 6.0"
11’ 4’3"6.5"
2.5" Sched. 40 pipe(2.88 OD)
Pole and mounting hardware1
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
611www.lithonia.com | 1-800-279-8041PSG10
Wood PO
LES
SSWDBSquare Straight Wood, Direct Burial
Intended Use
Square straight laminated
wood pole for up to 35 foot
mounting heights. Espe-
cially suited for residential,
recreational and resort
developments, parks,
playgrounds and paths to
provide functional lighting
by night and attractive
landscaping by day.
Construction
Shaft: L1 laminate grade
West Coast Douglas Fir for
strength and appearance.
Construction grade on
all exposed wide faces
per WCLIB Grading Rules.
Lamination utilizes adhesives
meeting or exceeding
the exterior durability
performance requirements of
most recent revision of U.S.
Commercial Standard ANSI/
AITC A190.1-1983. A raceway
access hole for underground
wiring is centered 2'6" below
ground line and rises 30° to
vertical. If required, above
ground juction boxes of
various types can be used.
Available shaft widths are 4,
5, 6 and 7 inches.
Surface finish, appearance
and tolerance: Laminations
are kiln dried to average
moisture content of 14.5%
+/- 2.5% before surfacing.
Open defects such as knot
holes exceeding 1/2" in
diameter or wane exceeding
1/4" x 12" are filled with
woodfiller. Sides are surfaced
four faces with edges eased
to 3/8" radius. Tolerances are
from +0 to -1/8" for width
and thickness and +/- 1/4"
in length.
Preservative treatment:
Standards are treated with
6% pentachlorophenol borne
in light hydrocarbon solvent
in conformance with AWPA
Standards to a minimum net
retention of 0.60 pounds per
cubic foot of penta. All Stan-
dards are incised on all four
sides to 3/4" in depth from
butt to 12" above indicated
ground mark.
Wrapping: Lighting
standards are individually
wrapped using 2-ply laminat-
ed paper lumber wrap with
waterproof ply on outside to
protect poles.
Top cap: Metal top cap is
provided unless fixture is
tenon mounted.
ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.
TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST
CATALOG NUMBER
NOM. MOUNT HT. (FT.)
POLE SHAFT SIZE (IN. X IN. X FT.)
80 MPHMAX. WT.
90 MPH
MAX. WT.
100 MPH
MAX. WT.
APPROX. SHIP WT.
(LBS.)SSWDB 10 4X 10 4.5 x 5.125 x 13.5 16.42 150 11.62 150 9.22 150 80SSWDB 12 4X 12 4.5 x 5.125 x 15.5 12.62 150 6.72 150 6.62 150 85SSWDB 15 4X 15 4.5 x 5.125 x 19 8.52 150 5.32 150 3.72 150 110SSWDB 15 5X 15 5.125 x 6 x 19.5 19.42 150 13.9 150 10.22 150 130SSWDB 20 4X 20 4.5 x 5.125 x 24.5 3.92 150 - - - - 140SSWDB 20 5X 20 5.125 x 6 x 25 11.62 150 7.02 150 4.72 150 200SSWDB 20 6X 20 6 x 6.75 x 30 21.42 150 14.22 150 10.62 150 260SSWDB 25 5X 25 5.125 x 6 x 30 6.32 150 2.62 150 - - 250SSWDB 25 6X 25 6 x 6.75 x 30 13.82 150 8.02 150 5.12 150 300SSWDB 30 6X 30 6 x 6.75 x 36 8.02 150 3.22 150 - - 400SSWDB 35 7X 35 6.75 x 7.5 x 41.5 8.02 150 2.32 150 - - 730
WOODEN CROSSARMCATALOG
NUMBERDESCRIPTION
EPA (FT2)
WEIGHT (LBS.)
WA12 2' single-fixture arm 0.86 33WA13 3' single-fixture arm 1.29 37WA14 4' single-fixture arm 1.72 42WA22 2' two-fixture arm 1.51 42WA23 3' two-fixture arm 2.37 50WA24 4' two-fixture arm 3.23 59
INSTALLATION NOTES: Do not erect poles without having fixtures installed. Metal cap must be installed unless fixture is top mounted. Poles are directly embedded in firm soil. Under heavy load, or in poor soil conditions, concrete embedment may be required. For parking lot installations, poles can be fitted with bumper protection devices or a concrete collar. Embedment depth determined by local codes and soil conditions; designed by others.
2 3/4"
4'4'-9"
WA12
WA13
One-Way Crossarms
2'-9"2'
3'-9"3'
9"
9"
4 1/2"
WA14
4 1/2"
9"
(typ.)(typ.)
Two-Way Crossarms
4'2'
6'3'
4 1/2"4 1/2"
8'4'
WA22
2'
WA24
3'
4'
WA23
2 3/4"
Notes
crossarm.
2'-6"
Raceway EntranceSee Section A-A
A
A
Ground Line Mark
1-1/4"
R3/8"
30°
1-1/4"
Ground Line
2' 6"
LC
LC
SCALE: 3" = 1'
Section A-A
1"
Pole Detail Top Profile
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com612
PO
LES Options & Accessories
SSS HHC: Order as hand-hole cover for full pole description. Also
specify if pole is existing.
CATALOG NUMBER
DESCRIPTION
FDL Festoon duplex outlet, less electric
Provision provided for mounting duplex outlet. When ordering,
specify location in height and feet above base of pole and orienta-
tion from the hand hole.
Four nut covers are standard for RSA, RTAU, RTS, RTSU and RTA
poles only.
TENON MOUNTING SLIPFITTERS ORDER SEPARATELYNUMBER OF FIXTURES
ONETWO
@180°TWO
@90°TWO
@120°THREE @90°
FOUR @90°
TENON OD
2-3/8" T20-190 T20-280 T20-290 T20-320 T20-390 T20-490
2-7/8" T25-190 T25-280 T25-290 T25-320 T25-390 T25-490
4" T35-190 T35-280 T35-290 T35-320 T35-390 T35-490
AERIS™
2-3/8" AST20-190 AST20-280 AST20-290 AST20-320 AST20-390 AST20-490
2-7/8" AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490
4" AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490
CATALOG NUMBER
DESCRIPTIONCATALOG
NUMBERDESCRIPTION
CPL12 1/2" threaded coupling NPL12 1/2" threaded nipple
CPL34 3/4" threaded coupling NPL34 3/4" threaded nipple
CPL1 1" threaded coupling NPL1 1" threaded nipple
Threaded couplings and/or nipples must be factory installed. When ordering, specify location in height and
feet above base of pole and orientation from the hand hole.
Anchor Bolts
Base Covers
Festoon Outlets
Hand-Hole Cover Plates
Tenon Dimensions
Horizontal Arm Bracket
VD-Vibration Damper
Nut Covers
Bolt-On Tenon
Tamperproof Screws
Available in various sizes for use with Lithonia lighting poles.
Set includes hex nuts and washers. Anchor bolt is partially
galvanized for exposed threads per ASTM-A153. Bolts have
minimum-yield strength rating of 55,000 psi, AASHTO M314
GR55. See individual pole catalog pages for anchor bolt sizes
and description.
CATALOG NUMBER
POLE SQUARE X DEPTH
SBC4 SSS 4" 8.75" x 5.0"
SBC5 SSS 5" 11.50" x 6.0"
SBC6 SSS 6" 12.75" x 5.6"
For full-base cover on other poles, must order FBC. When ordering
separately, specify full pole nomenclature; i.e., FBC for RTA 25 7E. Also
specify if pole is existing.
Two-piece, full-base cover. Four fasteners provided to secure
pieces together. Finished to match pole. Shipped separately.
Standard with steel poles only.
CATALOG NUMBER
MATERIAL EPA (FT2)WEIGHT (LBS)
H1-18A Aluminum .43 7
H1-18S Steel .50 11
H1-18F Fiberglass .45 8
H1-18C Concrete .55 9
Notes SSS and SSA arm attachment is slightly different from RTA. Arm
modifications located on pole to accept arms. Arms shipped as
separate item.
Single or twin side-mounted horizontal arm brackets for ad-
ditional luminaires. Made from 2-3/8" pipe. Upright is 18" from
pole; special arm lengths may be available upon request. Arms
are rated for luminaires up to 4.5 sq. ft. EPA and 100 lbs. per
arm. When ordering, specify location in height and feet above
base of pole and orientation from the hand hole.
Order as TP. Tamperproof screws provided
with hand-hole covers.
CATALOG NUMBER
A B C SWEIGHT (LBS)
SBT-4S 2-3/8" 3" 13-3/4" 5" 7
SBT-5S 2-3/8" 4" 13-3/4" 5" 8
SBT-6S 2-3/8" 5" 13-3/4" 5" 17
NotesIf ordering for existing pole, must order as MAEX and include original order number.
A
D
C
B
It has been found that low steady winds sometimes induce sec-
ond mode vibration in lighting poles. Second mode vibration
is characterized by the maximum periodic motion occurring at
approximately the mid-height of the pole. This type of vibration
can result in failure of the pole and/or luminaire. There is no
method of predicting destructive light pole vibration.
Notes1 FVD – Field installable vibration damper available upon
request. Consult factory.
2 For more information on the effects of vibrations, visit www.lithonia.com.
Field InstalledVibrationDamper
HandholeOpening
Foundation
Couplings & Nipples
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
613www.lithonia.com | 1-800-279-8041PSG10
PO
LESOptions & Accessories
Drill Mounting Options1
DMA393
DM39AS3
DM39AST13
DM39AST23
DM39KADT3
DM28DM28AS
DM28AST1DM28AST2DM28KADT
DM293
DM29AS3
DM29AST13
DM29AST23
DM29KADT3
DM19 DM19AS
DM19AST1 DM19AST2DM19KADT
D B
C
Hand hole A
Square
D B
C
Hand hole A
Round
DM493
DM49AS3
DM49AST13
DM49AST23
DM49KADT3
DM322
DM32AS2
DM32AST12
DM32AST22 DM32KADT2
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
Examples:1. SSS 25 5G with one arm-mount fixture and two floodlights on
horizontal arm brackets. Floodlights are to be 180° from each
other, 90° from the shoebox and 12 feet above the base.
2. RTA 30 8G with two arm-mount fixtures at 180°, one floodlight
on a horizontal arm bracket and a 1/2" coupling. Floodlight is
to be opposite hand hole and 6 feet from top of pole. Coupling
should be 10 feet from top, same side as floodlight.
3. SSS 20 4C with a 2-3/8” tenon and festoon outlet 90° left of
the hand hole, 5 feet above the base.
Order as: SSS 25 5G DM19 HA12A HA12C Order as: RTA 30 8G DM28 HA24C 12CP20C Order as: SSS 20 4C T20 FDL5D
Series/Height/Orientation
Series Height Orientation
HA Horizontal arm Height from base in ft. A Side of the pole with the hand hole
FDL Festoon outlet- less electrical Determined by application. B Side of the pole 90° counterclockwise from the hand hole (right)
CPL12 1/2” coupling C Side of the pole 180° counterclockwise from the hand hole (opposite)
CPL34 3/4” coupling D Side of the pole 270° counterclockwise (or 90° clockwise) from the hand hole (left)
CPL1 1” coupling
NPL12 1/2” threaded nipple
NPL34 3/4” threaded nipple
NPL1 1” threaded nipple
EHH Extra hand hole
PT Open top
T20 2-3/8” tenon
T25 2-7/8” tenon
T30 3-1/2” tenon
T35 4” tenon
MAEX Match existing
Notes1 AS denotes Aeris™ luminaire, AST1/AST2 denotes Aeris suspend size 1
or 2 and KADT denotes KAD suspend.
2 Available with round pole only.
3 Reference fixture page for minimum arm length required when mounting 2 or more fixtures at 90°.
Some pole options require designating the orientation from the
hand hole and height from the pole base must be specified when
ordering the pole. The orientation from the hand hole is designated
by the pole sides A, B, C or D. The height on the pole shaft is
designated by the distance from the pole base.
Example: HA12B
POLE ORIENTATION
ORDERING INFORMATION
PRODUCT INFORMATION
LITH
ON
IA O
UTD
OO
R
PSG101-800-279-8041 | www.lithonia.com614
PO
LES Options & Accessories
RBA38
RBA28
15"
15"
12"
30"
30"
12"
SBA38
6"
3"Sq.
2-3/8"O.D.
30"
30"
ORDERING INFORMATION
Projected area is for bracket
only. Bracket projected area is
added to luminaire projected
area to get total effective
projected area (EPA).
All brackets have a maximum
luminaire rating per tenon as
specified in the data table.
Finish: Natural aluminum.
Optional painted finishes
available. Plastic cap supplied.
Brackets mount to T25 tenon
2-7/8" OD, or pole top that is
2-7/8"OD.
ORDERING INFORMATION
ALUMINUMBRACKETSRound Poles Only
PRODUCT INFORMATION Options & Accessories
Projected area is for bracket
only. Bracket projected area is
added to luminaire projected
area to get total effective
projected area (EPA).
All brackets have a maximum
luminaire rating per tenon as
specified in the data table.
Finish: Natural aluminum.
Optional painted finishes
available.
Plastic cap supplied. Brackets
flush mount on 4", 5" and 6"
square poles. For use with inter-
nal sleeve, plain open-top poles,
Lithonia Lighting poles only.
Must be ordered with pole
to ensure proper fit.
ALUMINUMBRACKETSSquare Poles Only
CATALOG NUMER
BRACKET EPA (FT2)
BRACKET WEIGHT (LBS)
MAX FIXTURE WEIGHT/ARM (LBS)
MAX FIXTURE EPA/ARM @ 80 MPH
MAX FIXTURE EPA/ARM @ 90 MPH
MAX FIXTURE EPA/ARM @ 100 MPH
RBA28 1.3 8.4 100 6.0 6.0 5.3RBA32 1.7 14.3 100 6.0 6.0 4.8RBA38 2.0 11.9 100 6.0 5.2 4.1RBA48 2.8 16.2 75 3.5 2.6 2.0RBA49 2.2 17.5 100 6.0 6.0 4.8
CATALOG NUMER
BRACKET EPA (FT2)
BRACKET WEIGHT (LBS)
MAX FIXTURE WEIGHT/ARM (LBS)
MAX FIXTURE EPA/ARM @ 80 MPH
MAX FIXTURE EPA/ARM @ 90 MPH
MAX FIXTURE EPA/ARM @ 100 MPH
SBA28-4 0.9 12.0 100 6.0 6.0 6.0SBA28-5 0.9 12.0 100 6.0 6.0 6.0SBA28-6 0.9 12.0 100 6.0 6.0 6.0SBA38-4 1.5 17.0 100 6.0 6.0 6.0SBA38-5 1.5 17.0 100 6.0 6.0 6.0SBA38-6 1.5 17.0 100 6.0 6.0 6.0SBA48-4 2.3 22.0 75 4.0 4.0 4.0SBA48-5 2.3 22.0 75 4.0 4.0 4.0SBA48-6 2.3 22.0 75 4.0 4.0 4.0SBA49-4 1.7 22.0 100 6.0 6.0 6.0SBA49-5 1.7 22.0 100 6.0 6.0 6.0SBA49-6 1.7 22.0 100 6.0 6.0 6.0
RBA48
30"
30"
15"15"
24"
RBA32
41-1/2"
12"
12"
34"24"
RBA49
12"
SBA48
2-3/8"O.D.
30"
30"
3"Sq.
15"15"
6"
SBA49
2-3/8"O.D.
6"34"
24"
3"Sq.
SBA28
2-3/8"O.D.
6"18"
18"
3"Sq.
PRODUCT INFORMATION
LITHO
NIA
OU
TDO
OR
615www.lithonia.com | 1-800-279-8041PSG10
PO
LESOptions & Accessories
ORDERING INFORMATION
CATALOG NUMBER
BRACKET
EPA (FT2)BRACKET
WEIGHT (LBS)
MAX FIXTURE WEIGHT /ARM
(LBS)
MAX FIXTURE EPA /ARM @ 80 MPH
MAX FIXTURE EPA /ARM @ 90 MPH
MAX FIXTURE EPA /ARM
@ 100 MPHBS28 1.0 21.0 150 11.0 8.5 7.3
BS32 1.3 34.0 150 7.2 5.5 4.7
BS38 1.6 32.0 150 7.1 5.5 4.7
BS48 2.3 44.0 125 5.4 4.1 3.4
BS49 1.6 44.0 150 5.3 4.1 3.5
Projected area is for bracket
only. Bracket projected area is
added to luminaire projected
area to get total effective pro-
jected area (EPA). All brackets
have a maximum luminaire
rating per tenon as specified
in the data table.
Finish: Dark bronze, standard.
Other colors available (consult
factory). Plastic cap supplied.
Requires T20 Tenon OD 2-3/8"
– I.D. 2".
ORDERING INFORMATION
CATALOG NUMER
BRACKET EPA (FT2)
BRACKET WEIGHT (LBS)
MAX FIXTURE WEIGHT/ARM (LBS)
MAX FIXTURE EPA/ARM @ 80 MPH
MAX FIXTURE EPA/ARM @ 90 MPH
MAX FIXTURE EPA/ARM @ 100 MPH
SBS28 1.1 30.0 250 13.0 10.2 8.2
SBS38 1.7 42.0 150 8.5 6.6 5.5
SBS49 2.1 45.0 150 6.3 5.0 4.0
STEEL BRACKETS
STEEL BRACKETS
Round Poles Only
PRODUCT INFORMATION Options & Accessories
Projected area is for bracket
only. Bracket projected area is
added to luminaire projected
area to get total effective pro-
jected area (EPA). All brackets
have a maximum luminaire
rating per tenon as specified
in the data table.
Finish: Dark bronze, standard.
Requires T20 (2-3/8" max OD)
tenon on pole for mounting.
Square Poles Only
Standard Hub
2-3/8" O.D.Tubing
(3) 3/8" x 1/2"set screws @120°
30"
30"
12"
BS48
30"
30"
15"15"
12"
BS32
120°
24"41"
12"
BS49
90°
34"24"
12"
Tenon4" x 2-3/8" Dia.
42"
SBS49
(4)3/8"-16Set Screws
RemovableFront Cap
30"
30"
SBS38
(4) 3/8"-16Set Screws
Tenon4" x 2-3/8" Dia.
RemovableFront Cap
36"
12"
RemovableCap
2-3/8" O.D.Tubing
(3) 3/8" x 1/2"set screws @120°
BS28
BS38
30"
SBS28
(4) 3/8"-16Set Screws
Tenon4" x 2-3/8" Dia.
RemovableFront Cap
PRODUCT INFORMATION
Terson architectural outdoor lighting is about purposeful design. We create outdoor lighting systems that embody modern yet eclectic looks. Our products emphasize bold statements grounded in clean lines. Our designs flow together seamlessly in a coordinated and relevant manner. Our aim is toward proportional elements that are tied together with elegant simplicity. The result is a fresh set of solutions for both existing and new outdoor lighting applications.
TERSEN
616
www.tersenlighting.com | 1-800-410-4982PSG10 617
TERSEN
We begin all product designs with our eye on both geometric and golden ratio proportion. We carefully combine various elemental shapes to create new product designs that are individually unique, while maintaining an immediate relevance to basic architectural design principles. Our designs incorporate a variety of materials that are uniquely suited to provide the desired visual statement.
Systems: At Tersen, we believe it is paramount to integrate design with delivery of the entire lighting system. Our team simultaneously designs lighting fi xtures, poles and arms to create fl owing visual compositions that blend together in one harmonious statement. Unlike many of our peers, we design and manufacture a complete line of poles, arms and accessories to complement our fi xtures.
Collections: Our portfolio is fi lled with products that are designed to complement one another in both form and function. We strongly encourage the “reuse” of proven components and assemblies among different product families to demonstrate the interrelatedness among them. For instance, our VEO™ and RESONANCE™ products share a common lower assembly that exudes a visual familiarity between two strikingly different products.
Selections: Tersen luminaires are available in a variety of options, color accents and fi nishes. Optical packages deliver superior performance; select from multiple distribution choices with lamp choices ranging from compact fl uorescent, high pressure sodium to metal halide and several LED packages.
Visit TersenLighting.com for additional specifi cation and application information.
PSG101-800-410-8899 | www.tersenlighting.com618
RATIO™The RATIO offers a contemporary-styled, fully cast housing that supports 48 LED diodes which produce illumination equivalent to a traditional 175W metal halide lamp. Its stylistic “finned” design serves both as a heat sink and as an architectural statement. The fixture and pole are sold as a combined unit as the driver (power module) is conveniently mounted at the base of the tilt-down pole for easy installation and maintenance. Available in both symmetric and asymmetric distributions, RATIO is IP65 rated and has the Nighttime Friendly™ designation. VEO™The VEO combines a hint of retro design with a modern overtone on a fully cast lower assembly. The unique design of the upper canopy provides the option of filtered light between the triangular elements to serve as an architectural accent featuring four color options. Available in 50W to 150W MH with high-performance optics, the VEO is IP65 rated, EISA compliant and has the Nighttime Friendly designation.
FACADE™The FACADE neatly accents architectural building design with light framed in basic geometric shapes. It is available in diamond, round and square styles with 10 standard face plates and six accent colors; custom laser-cut faceplates also available. Choose from 50W up to 100W MH, 2/32T. FACADE is IP65 rated, wet location listed and EISA compliant.
PHI™The classic form of the PHI combines a diffused acrylic sphere with a fully cast supporting frame. Designed to illuminate pedestrian-scale environments that require a neo-classical theme, PHI is available in two sizes and lamp wattages of 50W to 150W MH. PHI is IP65 rated and EISA compliant.
RESONANCE™Blending traditional Venetian styling with contemporary accents, the RESONANCE has transformed an iconic design theme into modern lighting. The stately day-form appearance boasts clean lines and is constructed from a fully cast lower assembly and is available in multiple powder paint color options. Available from 50W up to 150W MH with high-performance optics, RESONANCE is IP65 rated, EISA compliant and has the Nighttime Friendly designation.
HIGHLAND PARK™The HIGHLAND PARK Series offers a selection of four Mission-era styles to choose from inspired by the architecture of Frank Lloyd Wright. The clean rectangular lines and overlapping roof are complemented with a selection of four standard face panels. Styles are available with energy-efficient lamping and full cutoff reflectors. The Series is IP65 rated, EISA compliant and has the Nighttime Friendly designation.
The Series features four styles:The Bungalow style offers clean rectangular roof detail that complements both commercial and residential surburban architecture.
steeply pitched roof with an intersecting gable to complement buildings with expansive porches, eyebrow windows and multiple gables.
formal design theme, characterized by its strict rectilinear lines and tailored roof. The disciplined architecture complements government buildings and houses of worship.
structural medium that complements flat or low roofs and long, clerestory- styled windows.
STYLES
SUB
SECT
ION
TER
SEN
STYL
ES O
F FI
XTU
RES
619
Our team designs and manufactures a complete line
of poles, arms and accessories to complement our fi xtures.Our square poles are aluminum with extruded shafts and permanent mold cast bases. The poles are a perfect complement to the Highland ParkTM luminaires. They are available in four shaft sizes: 4”, 5”, 4”- 6” stepped and 5”- 7” stepped. Our aluminum arm is designed to complete the squared styling and can be used on a pole or wall with pendant-mount luminaires.
Our round straight poles have shafts in 4” or 5” diameter with the decorative or plain case bases. All poles are aluminum with a choice of steel for extra strength (available only with the EC simple-based style). The poles are designed with a variety of bases to complete the architectural styling of the circular luminaires. When mounting multiple luminaires, there is a choice of three contemporary arms. The arms are aluminum and fi t onto the appropriate-sized pole tenon and are provided with 3” tenons for luminaire mounting.
620620
Antique Street Lamps offers a wide variety of attractive historical and contemporary outdoor lighting systems with superior optics for nighttime clarity. Products include luminaires, arms, posts, wall brackets, bollards and signage. Typical applications are downtown and urban environments, street lighting, historic districts/renovations, park areas, universities, high-end developments, hotels and resorts. We also specialize in custom projects from replicating historical designs to creating special designs made to fi t an individual project's needs.
ANTIQUE STREET LAMPS
621
CONTENTSCONTEMPORARYLuminaires ........................................................... 622, 624-625 Crossarms and Wall Brackets...............................................626Poles............................................................................623, 627
RAPID-SHIPLuminaires ...........................................................................628Posts....................................................................................629Wall Brackets .......................................................................630Bollards................................................................................630Assemblies...........................................................................631
HISTORICALLuminaires ...........................................................................632Arms ....................................................................................633Posts....................................................................................634Bollards................................................................................635
SIGNAGEBanner Arms ........................................................................636 Street Signs..........................................................................637
ANTIQ
UE STR
EET LAMPS
PSG101-800-410-8899 | www.antiquestreetlamps.com622
Series Lamp type1 Lens Distribution4 Voltage5 Options Finish
OL23 Large luminaire
OL20 Mini luminaire
BLCA BOL10LC Lighted bollard
Metal halide
50M MED 50W
70M MED 70W
100M MED 100W
150M MED 150W2
High pressure sodium
50S MED 50W
70S MED 70W
100S MED 100W
150S MED 150W2
Metal halide for T6 lamps3
39T6 G12 175W
70T6 G12 250W
LED light3
LED1
GCF Glass, clear flat
Large luminaire
SR2 Type II
SR3 Type III
SR4SC Type IV
SR5S Type V
Mini luminaire and lighted bollard
R2 Type II
R3 Type III
R4 Type IV
R5 Type V
TB1 120V
TB2 208V6
TB3 240V
TB4 277V
120 120V7
277 277V8
347 347V
HS House side shield9
SF Single fusing
DF Double fusing
ANBK Black
ANDB Dark bronze
DNA Natural aluminum
ANWH White
CM Custom match
CS Custom select RAL colors
CON
TEM
PO
RA
RY
ANTI
QU
E ST
REE
T LA
MP
S
Intended Use
Oslo luminaires and lighted
bollards are designed for
applications where cut-off
performance and contempo-
rary architectural style are
desired. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Please refer to our website at
www.antiquestreetlamps.com
for specifications.
Construction
Material: The luminaires
are cast, die-cast and spun
aluminum. The bollard is cast
and extruded aluminum.
Flat lens is manufactured
of clear impact-resistant
tempered glass.
Finish: The luminaires are
finished with a premium
polyester powder coating.
Standard colors are black or
dark bronze.
Optics
Anodized segmented
reflectors are designed for
superior uniformity and con-
trol. Reflectors are available
in four distributions.
Electrical
Luminaires are provided
with quick-disconnect H.I.D.
ballast assemblies. Porcelain
sockets are provided with the
reflector assembly.
Installation
Luminaires are designed
to slip-fit a 3" O.D. x 3" tall
tenon and are secured with
eight set screws. The bollard
is supplied with four 3/4"
diameter, L-type anchor
bolts. Two doors are provided
in the base for anchorage and
wiring access. Luminaires
and bollard roof are hinged
and gasketed for lamp and
reflector access.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Example: OL23 100M MED GCF SR2 TB1 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Luminaire Mini Luminaire Lighted Bollard
OL23 OL20
BLCA BOL10LC
12 dia. x 20 tall23 dia. x 23 tall
12 dia. x 47 tall
w/10 dia. base
“ “
“
“
“
““
Notes1 Lamp not supplied with luminaires or bollard, except for LED.
2 150W only available for large luminaire.
3 Available for mini luminaire and bollard only.
4 LED only available with symmetric distribution. No specification required.
5 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
6 Consult factory for availability in Canada.
7 120 is available voltage for LED and 39T6 only.
8 277 is available voltage for 39T6 only.
9 Available for SR2, SR3 and R4 luminaire distributions only.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
Luminaires
OSLO LUMINAIRES & LIGHTED BOLLARD
ORDERING INFORMATION
PRODUCT INFORMATION
623www.antiquestreetlamps.com | 1-800-410-8899PSG10
AN
TIQU
E STREET LA
MP
SCO
NTEM
PO
RA
RY
Series Height Mounting method Finish
PX OL17 Post
OLC42 Arm
OLCWB Wall bracket
For post only
8
10
12
14
16
For post only
3T3 3" tenon x 3" tall
3T4 3" tenon x 3" tall
ANBK Black
ANDB Dark bronze
DNA Natural aluminum
ANWH White
CM Custom match
CS Custom select RAL colors
OSLOPost, Arm and Wall Bracket
Intended Use
The posts and arms provide
a contemporary style
to compliment the Oslo
luminaires. Typical applica-
tions include street lighting,
downtowns, parks, public
areas and mall interiors.
Please refer to our website at
www.antiquestreetlamps.com
for specifications.
Construction
Materials: The arm and wall
bracket are cast aluminum
one-piece construction.
Posts are cast aluminum and
aluminum pipe, one-piece
construction. Hardware and
fasteners are stainless steel
material. Standard exterior
hardware is of a tamper-
resistant design.
Finish: The posts are finished
with a premium polyester
powder coating. Standard col-
ors are black or dark bronze.
Installation
The arm mounts on a 3" O.D.
x 4" tall tenon and is secured
with set screws. The wall
bracket mounting plate has
four .56" diameter holes for
mounting to the wall. It is
furnished with four 3/8-16
acorn nuts and washers. Wall
studs are furnished by others.
Both arm and wall bracket
have 3" O.D. x 3" tall ten-
ons. The post is provided
with four, 3/4" diameter,
L-type anchor bolts. Four
doors are provided in the
base for anchorage access.
One door is provided at
center for wiring access. At
the top of the post is a 3"
O.D. x 3" or 4" tall tenon for
luminaire or arm mounting.
Example: PX OL17 16 3T4 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
PX OL17 OLC42 OLCWB
Wall bracketCrossarm
PostDrawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
Poles
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com624
CON
TEM
PO
RA
RY
ANTI
QU
E ST
REE
T LA
MP
S
Series Lamp type1 Lens Distribution Voltage4 Options Finish
EC13RT
ES22ST
EH16RT
EM17RT
EH22RT
EM25RT
Metal halide (EC13, ES22, EH16, EM17 only)
50M MED 50W
70M MED 70W
100M MED 100W
150M MED 150W
High pressure sodium (EC13, ES22, EH16, EM17 only)
50S MED 50W
70S MED 70W
100S MED 100W
150S MED 150W
Metal halide (EM25, EH22 only)
175M MOG 175W
250M MOG 250W
400M MOG 400W2
High pressure sodium (EM25, EH22 only)
150S MOG 150W
250S MOG 250W
400S MOG 400W2
All luminaires
GCF Glass, clear fl at
GCSG Glass, clear sag
EC13RT only
ACS Acrylic, clear smooth
PCS Polycarbonate, clear smooth
SR2 Type II
SR3 Type III
SR4SC Type IV
SR4W Type IV3
SR5S Type V
TB1 120V
TB2 208V5
TB3 240V
TB4 277V
347 347V
All luminaires
HS House side shield6
SF Single fusing
DF Double fusing
EC13RT, H16 & H22 only
1DS Decorative shield
EC13RT only
2DS Two decorative shields
2DD Two decorative discs
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
CONTEMPORARY LUMINAIRES
Intended Use
Luminaires are designed for
applications where cut-off
performance and contempo-
rary architectural style are
desired. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Shown here is a sampling of
luminaires available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifi cations.
Construction
Materials: Ballast housings
and skirts are constructed of
cast aluminum. ES22 skirt is
spun aluminum. Flat and sag
lens options are manufac-
tured of clear impact-resis-
tant tempered glass. EC13RT
has a globe of clear acrylic or
polycarbonate.
Finish: The luminaires are
fi nished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Optics
Anodized segmented
refl ectors are designed for
superior uniformity and con-
trol. Refl ectors are available
in fi ve distributions.
Electrical
Luminaires are provided
with quick-disconnect H.I.D.
ballast assemblies. Porcelain
sockets are provided with the
refl ector assembly.
Installation
Luminaires are designed to
mount to swivel adapters
provided with the contem-
porary arms. See luminaire
specifi cations for appropriate
arm sizes.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Example: EH16RT 100M MED GCF SR2 TB1 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
EM17RT GCF EM17RT GCSG EH16RT GCF EH16RT GCSG
EH16RT GCF 1DS
EM25RT GCF EM25RT GCSG EH16RT GCF EH16RT GCSG
EC13RT EC13RT 1DS EC13RT 2DS EC13RT 2DDES22ST GCF ES22ST GCSG
Stockholm SeriesCopenhagen Series
Munich Series Hanover Series
Optional Decorative Shield
Optional Decorative Shields
Optional Decorative Discs
Optional Decorative Shield
Notes1 Lamp not supplied with luminaires.
2 Refectors designed for ED28 lamp or E18 lamp.
3 SR4W is only available with EM25 and EH22
4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
5 Consult factory for availability in Canada.
6 Available for SR2, SR3 and SR4W only.
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches unless otherwise noted.
Luminaires
ORDERING INFORMATION
PRODUCT INFORMATION
625www.antiquestreetlamps.com | 1-800-410-8899PSG10
AN
TIQU
E STREET LA
MP
SCO
NTEM
PO
RA
RY
Series Lamp type1 Lens Distribution Voltage2 Options Finish
Luminaires
BT1 Post-top luminaire
BT2 Post-top luminaire
BT3 Post-top luminaire
BTSM Side-mount luminaire
Bracket arms
BTA4/1 One-way 4" arm
BTA4/2 Two-way 4" arms
BTA4/3 Three-way 4" arms
BTA5/1 One-way 5" arm
BTA5/2 Two-way 5" arms
BTA5/3 Three-way 5" arms
BTWB Wall bracket arm
Luminaires only
Metal halide
50M MED 50W
70M MED 70W
100M MED 100W
150M MED 150W
High pressure sodium
50S MED 50W
70S MED 70W
100S MED 100W
150S MED 150W
Luminaires only
GCF Glass, clear fl at
Luminaires only
SR2 Type II
SR3 Type III
SR4SC Type IV
SR5S Type V
Luminaires only
TB1 120V
TB2 208V3
TB3 240V
TB4 277V
347 347V
480 480V
Luminaires only
HS House side shield4
SF Single fusing
DF Double fusing
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
BRISTOL LUMINAIRES
Intended Use
Luminaires are designed for
applications where cut-off
performance and contempo-
rary architectural style are
desired. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Please refer to our website at
www.antiquestreetlamps.com
for specifi cations.
Construction
Materials: Luminaires are
cast aluminum with a spun
aluminum roof. Flat lens
is manufactured of clear
impact-resistant tempered
glass. Bracket arms and wall
brackets are cast aluminum.
Finish: The luminaires are
fi nished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Optics
Anodized segmented
refl ectors are designed for
superior uniformity and con-
trol. Refl ectors are available
in four distributions.
Electrical
Luminaires are provided
with quick-disconnect H.I.D.
ballast assemblies. Porcelain
sockets are provided with the
refl ector assembly.
Installation
Post-top luminaires slip-fi t a
3" O.D. x 3.5" tall tenon. Side-
mount luminaire bracket
arms are designed to slip fi t a
3.375" O.D. x 8" tall tenon for
4" diameter post and a 4.375"
O.D. x 8" tall tenon for 5"
diameter post. Luminaires are
secured with six set screws.
Listings
UL Listed to U.S. and Cana-
dian standards. Luminaires
are labeled as suitable for
wet locations.
Example: BTSM 100M MED GCF SR2 TB1 SF ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Post-top Luminaires Side-mount Luminaires with Post-top Bracket Arms Side-mount Luminaire
with Wall Bracket
BT1
BT2 BT3 BTSM
BTA4/1 OR BTA5/1
BTSM
BTA4/2 OR BTA5/2
BTSM
BTA4/3 OR BTA5/3
BTSM
BTWBOne-way Two-way Three-way
Notes1 Lamps not supplied with luminaires.
2 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
3 Consult factory for availability in Canada.
4 Available for SR2 and SR3 only.
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Luminaires
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com626
CON
TEM
PO
RA
RY
ANTI
QU
E ST
REE
T LA
MP
S
CONTEMPORARY ARMS & WALL BRACKETS
Series/Size Options Finish
Series Size
EAA 4/1 One-way 4" arm
EAB 5/1 One-way 5" arm
EAC 4/2 Two-way 4" arms
EAE 5/2 Two-way 5" arms
EAH 4WB Small wall bracket
EAJ 5WB Large wall bracket
EAL
Arms only
PER NEMA twist-lock receptacle only
PE1 NEMA twist-lock photocontrol, 120V, 208V, 240V
PE3 NEMA twist-lock photocontrol, 347V
PE4 NEMA twist-lock photocontrol, 480V
PE7 NEMA twist-lock photocontrol, 277V
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
Intended Use
The contemporary arms are
designed for aesthetically
integrating single or mul-
tiple luminaires with posts.
A matching family of wall
brackets provides the abil-
ity to integrate building-
mounted luminaires with
post-mounted site lighting.
Typical applications include
street lighting, down-
towns, parks, public areas
and mall interiors.
Shown here is a sampling
of arms available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specif ications.
Construction
Materials: Arms and wall
brackets are one-piece con-
struction of cast aluminum
and extruded or formed
aluminum. Hardware and
fasteners are stainless steel
material. Standard exterior
hardware is of a tamper-
resistant design.
Finish: The arms and wall
brackets are f inished with a
premium polyester powder
coating. Standard colors
are black, dark bronze or
dark green.
Arms and wall brackets are
available in two sizes. The
4" diameter arms are for
the small contemporary
luminaires and 4" diameter
posts. The 5" diameter arms
are for the large contem-
porary luminaires and 5"
diameter posts.
Installation
The arms are designed to
slip-fi t a 3.375" dia. post-top
tenon (4" arms) or 4.375" dia.
post-top tenon (5" arms) and
are secured with eight socket
set screws. The center fi nial
and arm fi nial are removable
to allow for wiring access.
Wall brackets are provided
with four or six 1/2" diameter
holes for mounting to the
wall. Wall bracket mounting
hardware is not provided.
Arms and wall brackets are
provided with swivel adapt-
ers for luminaire mounting.
Optional twist-lock photo
control is installed at center
spool top instead of the fi nial.
Example: EAE5/1 PER PE1 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
EAE4/1 EAE4WB EAE5/2
One-way Wall Bracket Two-way
EAA4/1 EAB4/1 EAC4/1 EAH4/1 EAJ4/1 EAL4/1
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches unless otherwise noted.
All arm styles are available in both 4" and 5" sizes and as one-ways, two-ways and wall brackets.
Crossarms and Wall Brackets
ORDERING INFORMATION
PRODUCT INFORMATION
627www.antiquestreetlamps.com | 1-800-410-8899PSG10
AN
TIQU
E STREET LA
MP
SCO
NTEM
PO
RA
RY
Series Height1,2 Shaft Mounting method Finish
EPAX Aluminum contemporary
EPSX Steel contemporary
PX PD18 Aluminum decorative (Philadelphia series)
10
12
14
16
18
20
22
24
26
28
30
S4 Smooth 4"
S4S6 Smooth 4"/6.63"
S5 Smooth 5"
S5S7 Smooth 5"/7"
4 posts
3-3/8T11 Standard tenon
3-3/8T8 Tenon for arm EAL4
5 posts
4-3/8T11 Standard tenon
4-3/8T8 Tenon for arm EAL5
All posts
0T0 No tenon
3T3 3" x 3" tenon
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
Intended Use
Eurotique® poles provide a
contemporary style appear-
ance that is perfectly suited
for use with contemporary
luminaires and arms. Posts
are available in 10-foot to 30-
foot heights. Typical applica-
tions include street lighting,
downtowns, parks, public
areas and mall interiors.
Please refer to our website at
www.antiquestreetlamps.com
for specifications.
Construction
Posts are available in either
aluminum or steel, and are
one-piece construction with
integral anchor/base plate
and two-piece base cover
or one-piece cast aluminum
base with interior anchor
bolts. Aluminum posts are
available as round straight,
4" and 5" or as round
stepped, 4"/6.63" and 5"/7".
Steel posts are available as
round straight, 4" and 5" or
as round stepped, 5"/7".
Materials: Aluminum
poles are manufactured of
extruded aluminum, with
cast aluminum anchor plate
or base, base cover and
handhole cover or access
door. Steel posts are manu-
factured of steel tubing with
steel anchor plates and cast
aluminum base cover and
handhole cover. Hardware
and fasteners are stainless
steel material. Standard
exterior hardware is of a
tamper-resistant design.
Finish: The posts are finished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Installation
The 4", 5" and 4"/6.63" posts
are supplied with four 3/4"
diameter, L-type anchor
bolts. The 5"/7" aluminum
posts are supplied with four
1" diameter, L-type anchor
bolts. The 5"/7" steel posts
are supplied with four 1-1/4"
diameter, L-type anchor
bolts. A hand-hole with cover
is provided in the lower shaft
for wiring access for EPAX and
EPSX series posts. PXPD18 is
provided with access door.
Integral tenons are provided
as required for mounting
arms and luminaires.
Example: EPSX 18 S4 3-3/8T11 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Notes1 Specify height and shaft; see configura-
tions table.
2 Note height limitations for shaft type. Heights above 22' not available for mount-ing twin luminaires. Factory is available to help with loading calculations.EP Series EP Series EP Series EP Series Philadelphia Series
EPAX OREPSX
EPAX OREPSX
EPAX EPAX OREPSX
PX PD18
10-1/2” dia. 11-1/2” dia. 15” dia. 16” dia. 18” dia.
S4
S5
S4S6
S5S7
S4 or S5
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
CONFIGURATIONS
SERIESS4
HEIGHT (FT.)S5
HEIGHT (FT.)S4S6
HEIGHT (FT.)S5S7
HEIGHT (FT.)EPAX 10, 12, 14, 16, 18 16, 18, 20 20, 22 20, 22, 24, 26EPSX 16, 18, 20 16, 18, 20 N/A 22, 24, 26, 28, 30
PX PD18 10, 12, 14 12, 14, 16, 18 N/A N/A
Poles
CONTEMPORARY POLES
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com628
RAP
ID-S
HIP
ANTI
QU
E ST
REE
T LA
MP
S
Series Bases1 Lamp type Lens
S16
S18
S20
AJ19
AT20
AT23
A21
A25
P36
RGA
RGR
RGR2
DS4
DS7
LT30
LTS30
TR25
TR30
KW35
A
AU
D
E
W
Metal halide
70M MED 70W
100M MED 100W
150M MED 150W
250M MED 250W2
High pressure sodium
100S MED 100W3
150S MED 150W3
100S MOG 100W
150S MOG 150W
All luminaires except those named below
ACT Acrylic, clear textured
S16, S18 and S20 only
AWS Acrylic white smooth
P36 only
PCT Polycarbonate clear textured
RGA, RGR and RGR2 only
ARF Acrylic refractive
DS4 and DS7 only
(blank) Acrylic refractive
KW35 only
ACS Acrylic clear smooth
AJ19 only
GRF Glass refractive
Distribution Voltage4 Options Finish Rapid-ship program
All luminaires except those named below
(blank) Symmetrical distribution
GR5 Glass refractor type V
GR3 Glass refractor type III
RGA, RGR, RGR2 and AJ19
R5 Refractive globe type V
R3 Refractive globe type III
DS4 and DS7 only
SR5S Reflector type V
TB1 120V
TB2 208V5
TB3 240V
TB4 277V
347 347V
FPF Finial for AT, A, RGA or RGR only
FSF Finial for RGA or RGR only
PER Twist-lock photocontrol receptacle6
PE1 NEMA twist-lock PE 120, 208, 240V6
PE3 NEMA twist-lock PE 347V6
PE4 NEMA twist-lock PE 480V6
PE7 NEMA twist-lock PE 277V6
ARV MD11 BL21 Cage for RGA, RGR or RGR2 only
ANBK Black
ANDB Dark bronze
ANDG Dark green
RSP
RAPID-SHIP LUMINAIRES
Intended Use
Antique Street Lamps rapid-
ship luminaires provide a
historical style appearance
that is perfectly suited for use
with Antique Street Lamps
posts. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Shipping: The rapid-ship
program provides product
shipment within 10 days of
receipt of order. Please refer
to our website at
www.antiquestreetlamps.com
for more information.
The specific details about
program terms and condi-
tions, order quantities and
product availability are
shown on our website and
are updated regularly.
Construction
Materials: All luminaire
bases and frames are cast
aluminum. Round domes are
spun aluminum. AJ19 globe
is refractive glass. All other
globes are formed from clear
acrylic or polycarbonate and
are either smooth, textured
or refractive. Hardware and
fasteners are stainless steel
material. Standard exterior
hardware is of a tamper-
resistant design.
Finish: The luminaires are
finished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Electrical
Luminaires are provided with
quick-disconnect H.I.D. bal-
last and socket assemblies.
Installation
Installation: All luminaires
are designed to slip-fit a 3"
O.D. x 3" tall tenon and attach
with set screws.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK RSP
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Luminaires with E Series Base
Sphere Globes Acorn Globes
S16 E S18 E S20 E AJ19 E AT20 E AT23 E A2 1 E AT25 E P36 E
RGA E RGR E RGR2 E
RGA EFPF
RGR EFPF
RGR2 EFSF DS4 E DS7 E
Octagonal
LT30 E LTS30 E
Square
Hexagonal
TR25 TR30
KW35 GR5
Refractive Globes
Cutoff Optics(Shown with optional ARV MD11 BL21 cage and finial)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
All luminaires except TR25, TR30 and KW35GRS are shown with the E Series base. Replace the E base with A, AU, D or W base for more luminaire choices. Base AU is available with optional twist-lock photocontrol.
Luminaires
Notes1 Bases not available with TR25, TR30 or KW35.
2 250M only available with S20, AJ19, AT23, A25, P36, RGA, RGR and RGR2 in conjunction with bases A, W or AU. Lamp not supplied with luminaires.
3 Available only with AT20, A21, DS4, DS7, TR25.
4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
5 Consult factory for availability in Canada.
6 Optional photocontrols only available with the AU luminaire base.
Luminaire Base Styles
E D A W AU
ORDERING INFORMATION
PRODUCT INFORMATION
AN
TIQU
E STREET LA
MP
S
629www.antiquestreetlamps.com | 1-800-410-8899PSG10
RAP
ID-SH
IP
Series Size1 Height1 Shaft Mounting method Finish Rapid-ship program
PX Cast aluminum post with extruded shafts
PA Cast aluminum post
PI Cast iron post
KW122
S92
S13
H10
W17
NY17
MO122
CH12
CH16
C20
8
9
10
11
12
13
14
163
PX only
F4 Fluted 4" 3
S4 Smooth 4" 3
F5 Fluted 5"
PA and PI only
(blank) Tapered fluted
3T3 3" O.D. x 3" tall tenon (standard) ANBK Black
ANDB Dark bronze
ANDG Dark green
RSP
Intended Use
Antique Street Lamps
rapid-ship posts provide a
historical style appearance
that is perfectly suited for
use with Antique Street
Lamps luminaires. Posts
are available in 10-foot to
16-foot heights. Typical
applications include street
lighting, downtowns,
parks, public areas and
mall interiors.
Shipping: The rapid-ship
program provides product
shipment within 10 days of
receipt of order. Please
refer to our website at
www.antiquestreetlamps.com
for more information. The
specific details about pro-
gram terms and conditions,
order quantities and product
availability are shown on
our website and are updated
regularly.
Construction
All posts are fabricated as
one-piece construction. The
shafts are telescoped into the
bases and double-welded
for maximum structural
integrity. An integral 3" O.D.
x 3" tall tenon is provided for
luminaire mounting.
Materials: The post bases
are cast aluminum or cast
iron. Aluminum posts have
4" or 5" diameter fluted or 4"
diameter smooth extruded
aluminum, or cast tapered
fluted shafts. Cast iron
posts have cast tapered
fluted shafts. Hardware and
fasteners are stainless steel
material. Standard exterior
hardware is of a tamper-
resistant design.
Finish: The posts are finished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Installation
Posts are provided with four,
hot-dip galvanized, 3/4"
L-type anchor bolts. A door is
provided in the base for an-
chorage and wiring access. A
grounding screw is provided
inside the base, accessible
from the door.
Example: PX CH16 14 F5 3T3 ANBK RSP
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
CONFIGURATIONSSERIES SIZE HEIGHT (FT.)
PX KW12, S9, S13, H10, W17, NY17, MO12, CH12, CH16 10, 12, 14, 16PA W17 8, 10, 12PA NY17 9, 11, 13PI NY17 10, 13PI C20 10, 12
Notes1 Specify size and height,
see Configurations table.
2 KW12, S9 and MO12 series posts only available with F4 or S4 shaft.
3 F4 and S4 shafts are not available in 16' height.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Posts
RAPID-SHIP POSTS
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com630
RAP
ID-S
HIP
ANTI
QU
E ST
REE
T LA
MP
S
Series Finish Rapid-ship program
PCPWB
ACAWB
ANBK Black
ANDB Dark bronze
ANDG Dark green
RSP
PRODUCT INFORMATION
RAPID-SHIP WALL BRACKETS
Intended Use
Antique Street Lamps rapid-
ship wall brackets provide a
historical style appearance
that is perfectly suited to
match Antique Street Lamps
light posts. Typical applica-
tions include street lighting,
downtowns, parks, public
areas and mall interiors.
Shipping: The rapid-ship
program provides product
shipment within 10 days of
receipt of order. Please
refer to our website at
www.antiquestreetlamps.com
for specific details about pro-
gram terms and conditions,
order quantities and product
availability.
Construction
Wall brackets are fabricated
as one-piece construction.
Materials: Wall brackets
are cast aluminum with an
aluminum mounting plate.
Hardware and fasteners are
stainless steel material. Stan-
dard exterior hardware is of a
tamper-resistant design.
Finish: The wall brackets are
finished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Installation
Wall brackets have four 9/16"
diameter holes for mounting
to the wall. Hardware
furnished by others.
Family Series Finish Rapid-ship program
BCA Cast aluminum bollards BCH12DT
BCH12BT
BNY17DT
BNY17BT
ANBK Black
ANDB Dark bronze
ANDG Dark green
RSP
Example: PCPWB ANBK RSP
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
PRODUCT INFORMATION Bollards
RAPID-SHIP BOLLARDS
Intended Use
Antique Street Lamps
rapid-ship bollards provide
a historical style appearance
that is perfectly suited to
match Antique Street Lamps
light posts. Typical applica-
tions include street lighting,
downtowns, parks, public
areas and mall interiors.
Shipping: The rapid-ship
program provides product
shipment within 10 days of
receipt of order. Please refer
to our website at
www.antiquestreetlamps.com
for specific details about pro-
gram terms and conditions,
order quantities and product
availability.
Construction
All bollards are fabricated as
one-piece construction.
Materials: Bollards have
shafts of 5" diameter fluted
extruded aluminum with
cast aluminum bases and
tops. Hardware and fasteners
are stainless steel material.
Standard exterior hardware is
of a tamper-resistant design.
Finish: Bollards are finished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Installation
Bollards are provided with
four, hot-dip galvanized, 3/4"
L-type anchor bolts. A door
is provided in the base for
anchorage access.
Example: BCA BCH12DT ANBK RSP
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Dome Top Ball Top Dome Top Ball Top
BCA BCH12DT BCA BCH12BT BCA BCH17DT BCA BCH17BT
New York SeriesChicago Series
12” dia. 17” dia.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Wall Brackets
PCPWB ACAWB
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
AN
TIQU
E STREET LA
MP
S
631www.antiquestreetlamps.com | 1-800-410-8899PSG10
RA
PID
-SHIP
RAPID-SHIP CONTEMPORARY
LIGHTING POST ASSEMBLIES
Intended Use
Antique Street Lamps rapid-
ship lighting assemblies
provide a contemporary
styling with full-cutoff,
high- performance optics.
Two size assemblies avail-
able in 16-, 18- and 20-foot
heights with single or twin
arm options. Typical applica-
tions include street lighting,
downtowns, parks, public
areas and mall interiors.
Shipping: The rapid-ship
program provides product
shipment within 10 days of
receipt of order. Please
refer to our website at
www.antiquestreetlamps.com
for more information.
Construction
Materials: Posts are steel
construction with a 4" or
5" shaft and an aluminum
two-piece base cover. Arms
are one-piece aluminum and
cast aluminum construction.
Luminaires are cast alumi-
num with a clear glass flat
lens. Hardware and fasteners
are stainless steel material.
Standard exterior hardware is
of a tamper-resistant design.
Finish: The posts are finished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Optics
Luminaires utilize high-
performance reflectors in
type 3 distribution.
Electrical
Luminaires are provided with
quick-disconnect H.I.D. ballast
and socket assemblies.
Installation
Posts are provided with four,
hot-dip galvanized, 3/4" L-type
anchor bolts and a handhole
with cover for wiring access.
Arms slip-fit the post tenon
and are secured with eight
socket set screws. Luminaires
mount securely to the arm
plumb device and are provided
with a hinged and gasketed
lens ring with captive screw for
easy lamp access.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Series Height Shaft Mounting method Arms Options Luminaires Lamp type1
EPSX 16
18
20
Small assembly
S4
Large assembly
S5
Small assembly
3-3/8T8 Tenon size
Large assembly
4-3/8T8 Tenon size
Small assembly
EAL4/1
EAL4/2
Large assembly
EAL5/1
EAL5/2
Arm options
PER Twist-lock photocontrol receptacle
PE1 NEMA twist-lock PE 120, 208, 240V
PE3 NEMA twist-lock PE 347V
PE4 NEMA twist-lock PE 480V
PE7 NEMA twist-lock PE 277V
Small assembly
EM17RT
EM17ST
EM17FT
Large assembly
EM25RT
EM25ST
EM25FT
Metal halide (small assembly only)
50M MED 50W
70M MED 70W
100M MED 100W
150M MED 150W
Lamp type1 (continued) Lens Distribution Voltage3 Finish Rapid-ship program
High pressure sodium (small assembly only)
50S MED 50W
70S MED 70W
100S MED 100W
150S MED 150W
Metal halide (large assembly only)
175M MOG 175W
250M MOG 250W
400M MOG 400W2
High pressure sodium (large assembly only)
150S MOG 150W
GCF Glass, clear flat SR3 Type III TB1 120V
TB2 208V4
TB3 240V
TB4 277V
347 347V
ANBK Black
ANDB Dark bronze
ANDG Dark green
RSP
Example: EPSX 16 S4 3-3/8T8 EAL4/1 PER PE1 EM17FT 100M MED GCF SR3 TB1 ANBK RSP
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Notes1 Lamp not supplied with luminaires.
2 Reflectors designed for ED28 lamp.
3 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
4 Consult factory for availability in Canada.
S55" dia. Smooth Shaft
S44" dia. Smooth Shaft
EPSX EPSX
EAL5/1
EM25FTEAL4/1
EM17FT
PostsDrawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Assemblies
Luminaires
Ringed Top Smooth Top Fluted Top
Small
Large
Arms
EAL5/2
EAL4/2EM17RT EM17ST EM17FT
EM25RT EM25ST EM25FT
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com632
Series Base Lamp type Lens Distribution
Available with base
AT23
A25
P36
TL26
LT30
RGT
RGA
RGR
RGC
DS4
DS7
DS8
DS10
Not available with base
TR30
KW35
FM44
G36
DS3
DS2
BH27
CM28P32
VG31C33
HLT30
A
AU
D
E
K
W
Metal halide
70M MED 70W
100M MED 100W
150M MED 150W
250M MOG 250W1
High pressure sodium
70S MED 70W
100S MED 100W2
100S MOG 100W3
150S MED 150W2
150S MOG 150W3
250S MOG 250W1
All luminaires except those named below
ACT Acrylic clear textured
P36 only
PCT Polycarbonate clear textured
BH27, CM28, VG31 and all RGs only
ACS Acrylic clear smooth
DS4, DS8 and DS7 only
(blank) Acrylic refractive
G36, KW35, DS3 and DS2 only
ARF Acrylic refractive
All luminaires except those named below
GR5 Glass refractor type V
GR3 Glass refractor type III
All RGs only
R5 Refractive globe type V
R3 Refractive globe type III
DS2-DS8 only
SR2 Refl ector type II
SR3 Refl ector type III
SR4SC Refl ector type IV
SR5S Refl ector type V
Distribution (continued) Voltage4 Options Finish
DS10 only
TY5 Refl ector type V
VLR5, CM28 and VG31 only
VLR5 Vertical lamp refl ector type V
VLR3 Vertical lamp refl ector type III
CM28 and VG31 only
HLR Horizontal refl ector type III
TB1 120V
TB2 208V5
TB3 240V
TB4 277V
347 347V
FPF Finial for AT, A and all RGs only
PEB1 Photoelectric cell button 120V
PEB2 Photoelectric cell button 208, 240, 277V
PER Twist-lock photocontrol receptacle6
PE1 NEMA twist-lock PE 120, 208, 240V6
PE3 NEMA twist-lock PE 347V6
PE4 NEMA twist-lock PE 480V6
PE7 NEMA twist-lock PE 277V6
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
HIS
TOR
ICA
LAN
TIQ
UE
STR
EET
LAM
PS
HISTORICAL LUMINAIRES
Intended Use
Antique Street Lamps
luminaires provide a his-
torical style appearance that
is perfectly suited for use with
Antique Street Lamps posts.
Typical applications include
street lighting, downtowns,
parks, public areas and mall
interiors. Shown here is a sam-
pling of luminaires available.
Please refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifi cations.
Construction
Materials: All luminaire bases
and frames are manufactured
from heavy-wall, low-copper,
cast aluminum. Round domes
are spun aluminum or cast
aluminum. Hardware and
fasteners are stainless steel
material. Standard exterior
hardware is of a tamper-
resistant design.
Finish: The luminaires are
fi nished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Optics
Globes are formed from clear
acrylic or polycarbonate and
are either smooth, textured
or refractive. DS series
luminaires with cutoff optics
utilize anodized segmented
refl ectors available in four
distributions. Optional glass
refractors in type V or III
distributions are available.
Electrical
Luminaires are provided with
quick-disconnect H.I.D. bal-
last and socket assemblies.
Installation
All post-top luminaires are
designed to slip-fi t a 3"
O.D. x 3" tall tenon and are
secured with set screws.
All pendant/roadway
luminaires are designed to
mount to the roadway arms
plumbing device.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Notes1 250W only available with AT23, A25, P36, TL26, LT30,
and all RGs in conjunction with bases A, W or AU and all pendant luminaires. Lamp not supplied with luminaires.
2 Available only with DS luminaires.
3 Not available with DS luminaires.
4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V
in Canada).
5 Consult factory for availability in Canada.
6 Optional photocontrols only available with the AU luminaire base.
Square
Hexagonal
Round
TR30
KW35 FM44
G36
OctagonalAcorn Globes Acorn Globes with Frames
AT23 E A25 W P36 E TL26 A LT30 D
Refractive Globes
RGT A RGA E FPF RGR AU FPF RGC D FPF
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Luminaires
E D K A W AU
Luminaire Base Styles
Pendant/Roadway Luminaires
Hexagonal
Round
BH27 CM28P32
VG31C33 HLT30
Round
Octagonal HexagonalRound
DS10K DS3 DS2
DS4 K DS7 K DS8 K
Refractive Globes
Post-top Luminaires Cutoff Optics (DS)
Most luminaires above use base selections. Replace bases shown in iluustrations with any above. Base AU is available with optional twist-lock photocontrol.
ORDERING INFORMATION
PRODUCT INFORMATION
AN
TIQU
E STREET LA
MP
S
633www.antiquestreetlamps.com | 1-800-410-8899PSG10
HISTO
RICA
L
Series Finish
For post top luminaires
CCA24
ACA30
ASC30
PCP36
RT39
LB33
WTA28
For pendant luminaires
ELC27/1
WLC72/1
GAC48/1
CVC27/1
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
HISTORICAL ARMS
Intended Use
Antique Street Lamps arms
provide a historical style
appearance that is perfectly
suited for use with Antique
Street Lamps luminaires and
posts. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Shown here is a sampling
of arms available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifi cations. Arms may also
be available as four-ways,
three-ways, two-ways, one-
ways and as wall brackets.
See website for availablity.
Construction
All arms are fabricated as
one-piece construction.
Integral 3" O.D. x 3" tall
tenons are provided for post-
top luminaire mounting. A
plumbing device is provided
for mounting and leveling
the pendant luminaires.
Materials: The arms are cast
aluminum and extruded
aluminum. Removable cast
fi nials are provided at the
center for wiring access.
Hardware and fasteners are
stainless steel material. Stan-
dard exterior hardware is of a
tamper-resistant design.
Finish: The arms are fi nished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Installation
Arms slip-fi t a post tenon and
are secured with socket set
screws. Appropriate tenon
sizes vary for each arm. See
sizes below.
Example: CCA24 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Post-top Arms for Post-top Luminaires
Post-top Roadway Arms for Pendant Luminaires
CCA24 ACA30 ASC30 PCP363” O.D. x 3” tall tenon 3” O.D. x 5” tall tenon 3” O.D. x 4” tall tenon 3” O.D. x 5” tall tenon
RT39 LB33 WTA284” O.D. x 6.25” tall tenon 3” O.D. x 6” tall tenon 3” O.D. x 9” tall tenon
ELC27/1 WLC72/1 GAC48/1 CV27/13” O.D. x 12” tall tenon3” O.D. x 12” tall tenon3” O.D. x 9” tall tenon3” O.D. x 9” tall tenon
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Arms
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com634
HIS
TOR
ICA
LAN
TIQ
UE
STR
EET
LAM
PS
Series Size1,2 Height2 Shaft Mounting method4 Finish
PX Cast aluminum post with extruded shafts
PI Cast iron post
PZ Cast iron and steel post
W17
NY17
CH12
C20
PD18
KW20
H16
FW18
C24
NY20
6
7
8
10
12
13
14
15
163
17
18
20
21
22
23
PX only
F4 Fluted 4" 3
S4 Smooth 4" 3
F5 Fluted 5"
S5 Smooth 5"
PI and PZ only
(blank) Tapered fluted
3T3 3" O.D. x 3" tall tenon (standard)
3T4 3" O.D. x 4" tall tenon
3T5 3" O.D. x 5"tall tenon
3T6 3" O.D. x 6" tall tenon
3T9 3" O.D. x 9" tall tenon
3T12 3" O.D. x 12" tall tenon
4T6-1/4 4" O.D. x 6-1/4" tall tenon
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
HISTORICAL POSTS
Intended Use
Antique Street Lamps posts
provide a historical style
appearance that is perfectly
suited for use with Antique
Street Lamps luminaires.
Posts are available in alumi-
num, cast iron, and cast iron
and steel in 8-foot to 23-foot
heights. Typical applications
include street lighting,
downtowns, parks, public
areas and mall interiors.
Shown here is a sampling
of posts available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifications.
Construction
All posts are fabricated as
one-piece construction. An
integral 3" O.D. x 3" tall tenon
is provided for standard
luminaire mounting. Arms
may use different size tenons.
See arm specifications for
appropriate sizes.
Materials: The post bases are
cast aluminum or cast iron.
Aluminum posts have 4" or
5" diameter fluted or smooth
extruded aluminum, or cast
tapered fluted shafts. Cast
iron posts have cast tapered
fluted shafts. Cast iron and
steel posts have tapered and
fluted steel shafts. Hardware
and fasteners are stainless
steel material. Standard
exterior hardware is of a
tamper-resistant design.
Finish: The posts are finished
with a premium polyester
powder coating. Standard
colors are black, dark bronze
or dark green.
Installation
Posts are provided with four,
hot-dip galvanized, 3/4"
L-type anchor bolts. A door is
provided in the base for an-
chorage and wiring access. A
grounding screw is provided
inside the base, accessible
through the door.
Example: PX CH12 14 F4 3T3 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
CONFIGURATIONSSERIES SIZE HEIGHT (FT.)
PX CH12, W17, NY17, PD18, KW20 8, 10, 12, 14, 16PI H16 10, 12, 14PI FW18 6, 7, 10, 12, 13, 15PI C20 10, 12, 13, 15PZ C24 12, 13, 15, 17, 20, 22PZ NY20 13, 14, 16, 18, 21, 23
Posts
Notes1 Specify size and height, see configuration table.
2 Factory is available to help with loading calculations.
3 F4 and S4 shafts are not available in 16' height.
4 Check luminaire or arm specifications for proper tenon size.
ORDERING INFORMATION
PRODUCT INFORMATION
AN
TIQU
E STREET LA
MP
S
635www.antiquestreetlamps.com | 1-800-410-8899PSG10
HISTO
RICA
L
Series Size Lamp type1 Lens
BLCA Cast aluminum lighted bollards
BLCI Cast iron lighted bollards
BCA Cast aluminum bollards
BCI Cast iron bollards
BLCA only
BW14DTL
BCH12DTL
BNY17DTL
BH10L
BC13L
BLCI only
BC13L
BNY20L
BCA only
BW14DT
BCH12DT
BNY17DT
BH10
BC13
BCI only
BC13
BNY20
BLCA and BLCI only
Metal halide
50M MED 50W
70M MED 70W
100M MED 100W
High pressure sodium
50S MED 50W
70S MED 70W
100S MOG 100W
Shaft-mounted optics2
GWS Glass, white smooth
Top-mounted optics3
ACS Acrylic, clear smooth
AWS Acrylic, white smooth
Distribution3 Voltage4 Options Finish
(blank) Std. low brightness refl ector type V
GR3 Glass refractor type III
GRS Glass refractor type V
BLCA and BLCI only
TB1 120V
TB2 208V5
TB3 240V
TB4 277V
347 347V
EBB One eyebolt
2EBB Two eyebolts
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
HISTORICAL BOLLARDS
Intended Use
All bollards are fabricated as
one-piece construction with
removable top for optical
access where applicable.
Materials: Bollards are cast
aluminum or cast iron.
Aluminum bollards have
shafts of 5" diameter fl uted
extruded or cast fl uted alu-
minum with cast bases and
tops. Cast iron bollards are all
cast. Hardware and fasteners
are stainless steel material.
Standard exterior hardware is
of a tamper-resistant design.
Finish: The bollards are
fi nished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Optics
Lenses are white smooth
glass inside the extruded
aluminum shafts or acrylic
with choice of clear or white
in top-mounted optics. Lumi-
naires provide a symmetrical
distribution. Optional glass
refl ectors with type V or III
distributions are available
with bollards with top-
mounted optics.
Electrical
Luminaires are provided with
quick-disconnect H.I.D. bal-
last and socket assemblies.
Installation
Bollards are provided with
four, hot-dip galvanized, 3/4"
L-type anchor bolts. A door is
provided in the base for an-
chorage and wiring access. A
grounding screw is provided
inside the base, accessible
through the door.
Listings
UL Listed to U.S. and
Canadian safety standards.
Luminaires are labeled as
suitable for wet locations.
Example: BLCA BH10DTL 100M MED ACS GR5 TB1 EBB ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Notes1 Lamp not supplied with bollards.
2 BW14DTL, BCH12DTL and BNY17DTL only.
3 BH10L, BC13L and BNY20L only.
4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).
5 Consult factory for availability in Canada.
BCA BW14DT BLCA BW14DTL BCA BCH12DT BLCA BCH12DTL BCA BNY17DT BLCA BNY17DTL BCA BH10 BLCA BH10L
Chicago SeriesWashington Series New York Series Hartford Series
12” dia. 17” dia.
Capital Series
20” dia.
Cast Aluminum
Cast Iron or Cast Aluminum
12” dia. 10” dia.
Cast Iron
13” dia.
New York Series
BCI BC13BCA BC13
BLCI BC13LBLCA BC13L
BCI BNY20 BLCI BNY20L
Lighted with
Shaft-mounted OpticsLighted with
Shaft-mounted Optics
Lighted with
Shaft-mounted Optics
Lighted with
Topt-mounted Optics
Lighted with
Topt-mounted Optics
Cast Aluminum Cast Aluminum Cast Aluminum
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Bollards
ORDERING INFORMATION
PRODUCT INFORMATION
PSG101-800-410-8899 | www.antiquestreetlamps.com636
SIG
NAG
EAN
TIQ
UE
STR
EET
LAM
PS
Series Clamp diameter1 Arms Eyebolts Eyebolt clamp diameter1 Finish
Bolt-on
BAB 1 banner arm
2BAB 2 banner arms
3BAB 3 banner arms
4BAB 4 banner arms
One set clamp-on
BAC19 1 arm
BAC28 2 @ 180°
BAC29 2 @ 90°
Two sets clamp-on
2BAC19 1 arm
2BAC28 2 @ 180°
2BAC29 2 @ 90°
BACD3 3" Ø
BACD3-1/2 3.5" Ø
BACD4 4" Ø
BACD4-1/2 4.5" Ø
BACD5 5" Ø
BACD5-1/2 5.5" Ø
BACD6 6" Ø
BACD6-1/2 6.5" Ø
BACD7 7" Ø
BACD7-1/2 7.5" Ø
BACDTBS Ø to be specified
12H4 1"Ø, 12" long
18H4 1"Ø, 18" long
24H4 1"Ø, 24" long
30H4 1"Ø, 30" long
36H4 1"Ø, 36" long
Bolt-on
EBB 1 eyebolt
2EBB 2 eyebolts
3EBB 3 eyebolts
4EBB 4 eyebolts
One set clamp-on
EBC19 1 eyebolt
EBC28 2 @ 180°
EBC29 2 @ 90°
Two sets clamp-on
2EBC19 1 eyebolt
2EBC28 2 @ 180°
3EBC29 2 @ 90°
EBCD3 3" Ø
EBCD3-1/2 3.5" Ø
EBCD4 4" Ø
EBCD4-1/2 4.5" Ø
EBCD5 5" Ø
EBCD5-1/2 5.5" Ø
EBCD6 6" Ø
EBCD6-1/2 6.5" Ø
EBCD7 7" Ø
EBCD7-1/2 7.5 " Ø
EBCDTB S Ø to be specified
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
SIGNAGEBanner Arms
Intended Use
Antique Street Lamps banner
arms allow the ability to add
banners to Antique Street
Lamps light posts. Typical
applications include street
lighting, downtowns, parks,
public areas and mall interiors.
Shown here is a sampling of
banner arms available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifications.
Construction
Materials: The banner arms
are extruded aluminum.
Removable cast finials are
provided at the end for
banner placement. Bottom
eyebolts are recommended
because of the wind load of
the banner.
Finish: The banner arms are
finished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Installation
Banner arms have the option
of either a plate to bolt on
to the post mounting pad,
or a clamp to clamp around
the post.
Example: BAC19 BACD4 24H4 EBC19 EBCD4 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Banner Arms
BABBolt-on Mounting
Eyebolt EBBBolt-on Mounting
SampleBannerMounting(banner byothers)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Notes1 For clamp-ons only.
Banner Arms
ORDERING INFORMATION
PRODUCT INFORMATION
AN
TIQU
E STREET LA
MP
S
637www.antiquestreetlamps.com | 1-800-410-8899PSG10
SIGN
AGE
Series Clamp diameter1 Finish
Bolt-on mounting street signs
SS1B 1 sign frame
2SS1B 2 sign frame
Clamp-on mounting street signs
SS1C19 1 sign frame
SS1C29 2 sign frames @ 90°
Post-top mounting street signs
SSIP 1 sign frame
SSIP29 2 sign frames @ 90°
Clamp-on mounting traffic signs
STO30C Frame for 30" octagonal sign
STR3612C Frame for 36" x 12" rectangular sign
STR1824C Frame for 18" x 24" rectangular sign
Post top mounting traffic signs
STO30P Frame for 30" octagonal sign
STR3612P Frame for 36" x 12" rectangular sign
STR1824P Frame for 18" x 24" rectangular sign
Street signs
SSCD3 3" Ø
SSCD3-1/2 3.5" Ø
SSCD4 4" Ø
SSCD4-1/2 4.5" Ø
SSCD5 5" Ø
SSCD5-1/2 5.5" Ø
SSCD6 6" Ø
SSCD6-1/2 6.5" Ø
SSCD7 7" Ø
SSCD7-1/2 7.5" Ø
SSCDTBS Ø to be specified
Traffic signs
STCD3-1/2 3.5" Ø
STCD4 4" Ø
STCD3 3" Ø
STCD4-1/2 4.5" Ø
STCD5 5" Ø
STCD5-1/2 5.5" Ø
STCD6 6" Ø
STCD6-1/2 6.5" Ø
STCD7 7" Ø
STCD7-1/2 7.5" Ø
STCDTBS Ø to be specified
ANBK Black
ANDB Dark bronze
ANDG Dark green
ANPP Prime painted
CM Custom match
CS Custom select RAL colors
SIGNAGESign Frames
Intended Use
Antique Street Lamps sign
frames and banner arms allow
the ability to add signs and
banners to Antique Street
Lamps light posts. Typical
applications include street
lighting, downtowns, parks,
public areas and mall interiors.
Shown here is a sampling
of sign frames and banner
arms available. Please
refer to our website at
www.antiquestreetlamps.com
for more selections and for
specifications.
Construction
Material: Sign frames are
one-piece cast aluminum with
a solid backing and a 1" wide
border. Hardware and fasteners
are stainless steel material.
Finish: The sign frames are
finished with a premium
polyester powder coating.
Standard colors are black,
dark bronze or dark green.
Installation
Street sign frames have the
option of bolt-on, clamp-on
or post-top mounting. Traffic
sign frames have the option
of clamp-on or post-top
mounting. The post-top
version mounts on a 3" x 3"
O.D. tenon and is secured
with six socket set screws.
Bolt-on mountings will need
an orientation drawing for
the post. Contact the factory
for details.
Example: STR3612C STCD4 ANBK
ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.
Street Signs Traffic Signs
SS1B
SS1C19
SS1P
ST030C
ST030P
STR3612C
STR1824C
Frame for 36” x 12”
Rectangular Sign with
Clamp-on Mounting
Frame for 18” x 24”
Rectangular Sign with
Clamp-on Mounting
Frame for 30”
Octagonal Sign
Clamp-on Mounting
Post Top Mounting
Clamp-on Mounting
Post Top Mounting
Bolt-on Mounting
Frame for 30” x 6” Oval Sign
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Street Signs
Notes1 For clamp-ons only.
ORDERING INFORMATION
PRODUCT INFORMATION
Hydrel was launched with a mission: to make the most reliable underwater lighting the world has ever seen. This was no small task, since water is a hostile environment for lighting. But we accomplished it, and in the ensuing decades as we’ve moved up onto land, the company has continued to build its expanding lines of outdoor lighting products the same way. Rugged. Impenetrable. Uncommonly reliable. One thing is certain: Hydrel products are engineered to outperform anything on the market. It is in our DNA, and customers couldn’t be happier.
Indianapolis Airport | ©2009 Hydrel JW Marriott | Gary Steffy Lighting Design Inc. | ©2009 Kevin Beswick Bay St. Louis Bridge | HNTB Corporation | ©2009 Mark McCabe
First Citizens Bank | Cline Bettridge Lighting Design | ©2009 Robert Benson
HYDREL
638
HYD
REL
639
CONTENTSIN-GRADEFlow-Through In-Grade................................................ 640-644Accessories..................................................................645, 652 Sealed In-Grade ................................................... 646-651, 653Wet-Dry In-Grade.................................................................654Technical Information...........................................................655Well Lights................................................................... 656-659
FLOODFloodlighting.........................................660-663, 665-667, 671Accessories..................................................................664, 668Linear Floodlighting ..................................................... 672-674
MOUNTING ACCESSORIES .....................669-670, 675-677
LANDSCAPE LIGHTINGAccent Lighting ............................................................ 678-685
STEP & BORDERStep Lights................................................................... 686-688Border Lights ............................................................... 689-692
BOLLARDS ................................................................ 693-694
AREA & WALL MOUNTEDPole Mounted.......................................................................695Building Mounted ........................................................ 696-698Site & Area Lighting.............................................................699
UNDERWATERFountain & Refl ecting Pool Fixtures ............................. 700-704Swimming Pool Fixtures ......................................................705Accessories.................................................................. 706-707
HYD
REL
PSG101-800-750-9773 | www.hydrel.com640
IN-G
RA
DE
Series20 Material Lamp type Voltage Distribution5 Lens
M9410 Round single lens
M9420 Round double lens
M9430 Square single lens
M9440 Square double lens
A Aluminum
B Bronze
SS Stainless steel
Low voltage2
M35
M50
M75
P3650ILV
P3675ILV
Incandescent3
P1675I
P2050I
P3075I
100Q
Fluorescent6
18TRT
26TRT
32TRT
Ceramic metal halide
35CMT47, 18
35CMT67
70CMT47, 18
70CMT67
P2035CM
P3035CM
P3070CM
122
120
208
240
277
347
MVOLT4
VNSP Very narrow spot
NSP Narrow spot
SP Spot
MFL Medium flood
NFL Narrow flood
FL Flood
WFL Wide flood
VWFL Very wide flood
WWD Wall wash distribution
ASY Asymmetrical
CLC Convex lens clear
CLF Convex lens frosted
FLC Flat lens clear
FLC5 Flat lens clear, 5° axial spread
FLC10 Flat lens clear, 10° tilt
FLC20 Flat lens clear, 20° tilt
FLSR Flat lens, slip resistant
FLCAS Flat lens clear, anti-slip
FLF Flat lens frosted
Conduit entry Options Lamped Finish17
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom19
34S 3/4" NPT side
Internal accessories10
IHL Honeycomb louver
ISS Source shield8
LSF Linear spread filter
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
WWL Wall wash louver9
External accessories10
GS Glare shield
LC Lexan cover
RG Rock guard11
Trims10
BTR Bronze round
BTS Bronze square
STR Stainless round
STS Stainless square
Fusing
SF Single fuse12
DF Double fuse13
Ballasts14
GEB Electronic ballast15
MLEBAD Electronic dimming ballast16
LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
M9400Intended Use
The M9400 Series modular
in-grade lights are multi-
purpose units designed for
flush mounting in a variety
of substrates or materials.
The M9400 fixtures are used
to uplight architectural and
landscape features.
Construction
Door material: Cast aluminum,
cast bronze or stainless steel.
Round or square with two
stainless steel captive fasten-
ers that lock the lamp module
into the rough-in section.
Lamp module: Stainless steel,
sealed and purged of all mois-
ture with silicone gaskets,
stainless steel clamp band
and single fastener. Electrical
connection to lamp module
is done through submersible
connector with gold-plated
contacts. Lamp included.
Rough-in section: Injec-
tion- molded polymer with
integral junction box
for branch wiring (25
cubic inches/410ccm), U.V.
stabilized, impact- and
corrosion-resistant for use
in all types of environments.
Houses power module, lamp
modules and finishing com-
ponents. Adjustment ring
provides 360° aim rotation
with keyed section to receive
lamp module. Ring locks into
position with stainless steel
fasteners. RIS has a cylinder/
vault configuration.
Double lens: Includes 360°
Aim-Lock™ module support
ring, door assembly, tilt ring,
and module indexing seg-
ment providing maintenance
and relamping without
re-aiming. The lamp module
is suspended below the door
lens in a surface-adjustable,
15° tilt mechanism. The
insulating air layer reduces
surface temperatures. The
lenses are clear tempered
flat glass.
Electrical
Power module: Ballast is
encapsulated in a custom-
designed heat-dissipating
epoxy resin to eliminate
all moisture intrusion to
the ballast. Provided with
submersible rated cord/
connector for connection to
integral junction box and
lamp module. HID ballasts
are magnetic.
Electrical entries/junction
box: bottom or side entries
available. Box suitable for
through-branch wiring.
Splicing volume is 25 cubic
inches (410 ccm).
Listings
U.L., C.U.L., IP68, CE, NEMKO.
Example: M9420 B 70CMT6 MVOLT NSP FLC 34B ISS RG GEB LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Not available with M9430 and M9440.
2 If 12V is selected, transformer will not be provided.
3 Only available in 120V.
4 MVOLT is only available with fluorescent and metal halide lamps with electronic ballasts.
5 All distributions not available with all lamp types.
6 Available distributions are MFL, WWD and ASY.
7 Available distributions are NSP and MFL for T6; NSP, MFL and WWD for T4.
8 Not available with PAR, MR or fluorescent lamps.
9 Only valid with WWD distribution.
10 Accessories are mutually exclusive. Only RG and GS can be ordered together. External options and trims not available with SS doors.
11 RG is not valid with CLC or CLF lenses.
12 SF available with 120V, 277V or 347V and HID only.
13 DF available with 208V, 220V or 240V and HID only.
14 Only available with metal halide lamps and MVOLT voltage.
15 Standard on CMT4 lamps.
16 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details.
17 Finish only available on aluminum doors.
18 Lamps available with GEB or MLEBAD electronic MVOLT only.
19 Default conduit entry.
20 For lens load ratings, slip resistance and temperatures, see page 655.
Flow-Through In-Grade
ORDERING INFORMATION
16(40.6)9
(22.9)
12-1/4(31.1)
14-1/2(36.8)
19-1/2(49.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Incandescent, Low voltage, Fluorescent
HID
PRODUCT INFORMATION
HYD
REL
641www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series8 Material Lamp type Voltage LED color Distribution Lens7
M9410 Round single lens
M9420 Round double lens
M9430 Square single lens
M9440 Square double lens
A Aluminum
B Bronze
SS Stainless steel
12LED MVOLT CLW Cool white
CLWHO Cool white - high output
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RED Red
RBL Royal blue
SP Spot
MFL Medium flood
LSD Linear spread
WFL Wide flood
CLC Convex lens clear
CLF Convex lens frosted
FLC Flat lens clear
FLC10 Flat lens clear, 10° tilt
FLC20 Flat lens clear, 20° tilt
FLSR Flat lens, slip resistant
FLCAS Flat lens clear, anti-slip
FLF Flat lens frosted
Conduit entry Options Lamped Finish5
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom6
34S 3/4" NPT side
Internal accessories2
IHL Honeycomb louver
LSF Linear spread filter3
External accessories2, 4
GS Glare shield
LC Lexan cover
RG Rock guard
Trims2, 4
STS Stainless square
BTR Bronze round
BTS Bronze square
STR Stainless square
LP LED array installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
M9400Monochromatic LED
Intended Use
Hydrel's M9400 series
modular in-grade lights are
multi-purpose units designed
for uplighting architectural
and landscape features.
Construction
Door material: Cast alumi-
num, cast bronze or stainless
steel. Available in round or
square door trim.
Finish: Finish is natural alu-
minum or bronze. Stainless
steel door is brushed finish.
Aluminum doors may be
painted. See ordering guide
for color options.
Finishing section: Single or
double lens design includes
door assembly with 360°
Aim-Lock™ lamp module sup-
port ring. Module indexing
provides easy maintenance
and relamping without re-
aiming. Active optical lenses
also are available. Door trim
locks into position with
two stainless steel captive,
tamper-resistant fasteners.
Rough-in section: Injec-
tion- molded polymer with
integral junction box for
through- branch wiring. The
housing is U.V. stabilized,
impact- and corrosion-re-
sistant for use in all types of
environments. The rough-in
has a cylinder configura-
tion and houses the lamp
components and top door
finishing section.
Electrical
Lamp type: Monochromatic
LEDs, 12W LED array included.
Lamp module: Stainless
steel, sealed and purged of
all moisture with silicone
gaskets, stainless steel clamp
band and single fastener.
Electrical connection to lamp
module is done through
submersible connector with
gold-plated contacts.
Power module: LED driver is
encapsulated in a custom-
designed heat-dissipating
epoxy resin that also
eliminates all moisture
intrusion. Module is provided
with submersible rated cord
leads for connection to
integral junction box and
lamp module.
Conduit entry: Two (2)
bottom or side entries
available. Box suitable for
through-branch wiring.
Splicing volume is 25 cubic
inches (410 ccm).
Listings
U.L., C.U.L., IP68.
Example: M9410 A 12LED MVOLT CLW SP CLC 12B IHL LP BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
9(22.9)
16(40.6)
10(25.4)
9(22.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with M9430/M9440 square model.
2 Accessories are mutually exclusive; only RG and GS can be ordered together.
3 Not available with CLC or CLF convex lens.
4 Accessory not available with SS door material.
5 Finish only available with aluminum material.
6 Default conduit entry.
7 Specify top lens. Bottom lens is FLC format.
8 For lens load ratings and slip resistance, see page 655.
Flow-Through In-Grade
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com642
Series18 Material Lamp type Voltage Distribution Lens Conduit entry
M9710 Round single lens
M9720 Round double lens
M9730 Square single lens
M9740 Square double lens
A Aluminum
B Bronze
SS Stainless steel
Incandescent14
P38100I
P38150I
P38250I
100Q
150Q
250Q
Fluorescent
18TRT
26TRT
32TRT
42TRT
Metal halide
70M
100M
150M
P3870M
P38100M
P38150M
Ceramic metal halide
70CMT6
150CMT6
70CM
100CM
150CM
P3870CM
P38100CM
High pressure sodium
50S
70S
100S
150S
120
208
240
277
347
MVOLT1
NSP Narrow spot15
SP Spot16
NFL Narrow flood
MFL Medium flood
FL Flood17
WFL Wide flood16
WWD Wall wash distribution2
FLC Flat lens clear
FLC10 Flat lens clear, 10° tilt
FLC20 Flat lens clear, 20° tilt
FLF Flat lens frosted
FLC5 Flat lens clear, 5° axial spread2
FLSR Flat lens, slip resistant
FLCAS Flat lens clear, anti-slip
CLC Convex lens clear
CLF Convex lens frosted
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom8
34S 3/4" NPT side
Options Lamped Finish13
Internal accessories5
IHL Internal honeycomb louver
ISS Internal source shield3
LSF Linear spread
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
WWL Wall wash louver4
External accessories5, 6
GS Glare shield
LC Polycarbonate protective cover7
LS Light shield
RG Rock guard
Trims5, 6
BTR Bronze trim round
BTS Bronze trim square
STR Stainless trim round
STS Stainless trim square
Rings and masks
PRR Protective ring round
PRS Protective ring square
GM Grout mask
Fusing
SF Single fuse9
DF Double fuse10
Ballast11
GEB Electronic ballast
MLEBAD Electronic dimming ballast12
LP Lamp installed
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
IN-G
RA
DE
M9700Intended Use
Hydrel's M9700 series
modular in-grade lights are
multi-purpose units designed
for uplighting of architectural
and landscape features. These
units can be flush-mounted
into a variety of substrates or
landscape materials.
Construction
Door material: Cast aluminum,
cast bronze, cast aluminum or
bronze with stainless perfo-
rated trim insert, or stainless
steel. Available in round or
square door trim.
Finish: Finish is natural
aluminum or bronze. Stain-
less steel door is brushed
finish. Aluminum doors may
be painted.
Rough-in section: Injection-
molded polymer with integral
junction box for through-
branch wiring. The housing
is U.V. stabilized, impact- and
corrosion-resistant for use in
all types of environments. The
rough-in section has a cylin-
der/vault configuration and
houses the lamp and power
module components and top
door finishing section.
Lamp module: Stainless
steel housing, factory-sealed
and purged of all moisture
for longer component life.
Lens is sealed with silicone
gasket and stainless steel
clamp band assembly with
single fastener. Electrical
connection to lamp module is
done through a submersible
quick-pull plug connector
with gold-plated contacts.
Standard unit is thermally
protected. Lamp included.
Finishing section: Single
lens design includes door as-
sembly with 360° Aim-LockTM
lamp module support ring.
Module indexing provides
easy maintenance and re-
lamping without re-aiming.
Active optical lenses are also
available. Door trim locks into
position with two stainless
steel captive, tamper-
resistant fasteners.
Electrical
Power module: Ballast is
encapsulated in a custom-
designed heat-dissipating ep-
oxy resin that also eliminates
all moisture intrusion to the
ballast. Module is provided
with submersible rated cord
leads for connection to inte-
gral junction box and lamp
module. Standard ballast is
high power factor, fluorescent
electronic or HID magnetic.
Conduit entry: Two (2)
bottom or side entries
available. Box suitable for
through-branch wiring.
Splicing volume is 25 cubic
inches (410 ccm).
Listings
U.L., C.U.L., IP68, CE, NEMKO.
Example: M9710 B 150CMT6 120 NSP FLC 34B ISS GS LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
12(30.5)
12(30.5)
12” Bronze or Aluminum Square 13” Stainless Steel Square
12” Bronze or Aluminum Round 13” Stainless Steel Round
13(33.0)
13(33.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
12(30.5)
12(30.5)
16(40.7)
20(50.8)
Incandescent
HID, Fluorescent
Flow-Through In-Grade
Notes1 Standard on fluorescent and metal halide lamps with electronic ballast option.
2 FLF5 lens recommended for 70W HID and lower. FLC5 lens recommended for 100W HID and higher with WWD distribution.
3 ISS not available with PAR or fluorescent lamps, or WWD distribution.
4 Not available with PAR lamps.
5 Accessories are mutually exclusive. Choose one.
6 Not available with SS material.
7 LC not available for M9710, M9730.
8 Default coduit entry.
9 SF available with 120V, 277V or 347V HID only.
10 DF available with 208V, 220V or 240V HID only.
11 Available with MVOLT (120V-277V) voltage only for metal halide lamps to 150W maximum.
12 For use with O-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details.
13 Finish only available on aluminum doors.
14 Incandescent models available with 120V only.
15 NSP only available with T4 or T6 lamps.
16 Not available with T6 lamps.
17 Only available with PAR lamps.
18 For lens load ratings, slip resistance and temperatures, see page 655.
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
643www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series8 Material Lamp type LED color Voltage Distribution Lens
M9710 Round single lens
M9720 Round double lens
M9730 Square single lens
M9740 Square double lens
A Aluminum
B Bronze
SS Stainless steel
22LED CLW Cool white
CLWHO Cool white high output
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RED Red
RBL Royal blue
1206
MVOLT
SP Spot
MFL Medium flood
LSD Linear spread distribution
WFL Wide flood
FLC Flat lens clear
FLC10 Flat lens clear, 10° tilt
FLC20 Flat lens clear, 20° tilt
FLF Flat lens frosted
FLCAS Flat lens clear, anti-slip
FLSR Flat lens, slip resistant
CLC Convex lens clear
CLF Convex lens frosted
Conduit entry Options Lamped Finish5
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom7
34S 3/4" NPT side
Internal accessories2
IHL Internal honeycomb louver
LSF Linear spread
External accessories2, 3, 4
GS Glare shield
LC Polycarbonate protective cover
RG Rock guard
Trims2, 4
BTR Bronze trim round
BTS Bronze trim square
STR Stainless trim round
STS Stainless trim square
Dimming
LDIM 0-10V Dimming6
LP Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
M9700Monochromatic LED
Intended Use
Hydrel's M9700 series
modular in-grade lights are
multi-purpose units designed
for uplighting of architectural
and landscape features. These
units can be flush-mounted
into a variety of substrates or
landscape materials.
Construction
Door material: Cast aluminum,
cast bronze, cast aluminum or
bronze with stainless perfo-
rated trim insert, or stainless
steel. Available in round or
square door trim.
Rough-in section: Injection-
molded polymer with
integral junction box for
through-branch wiring. The
housing is U.V. stabilized,
impact- and corrosion-re-
sistant for use in all types of
environments. The rough-in
section has a cylinder/vault
configuration and houses
the lamp and power module
components and top door
finishing section.
Lamp module: Stainless steel
housing, factory-sealed and
purged of all moisture for
longer component life. In
the double lens units, the
lamp module is suspended
below the top door lens in a
surface-adjustable, 15° tilt
mechanism. The insulating
air layer helps to reduce
surface temperatures.
Lens is sealed with silicone
gasket and stainless steel
clamp band assembly with
single fastener. Electrical
connection to lamp module is
done through a submersible
quick-pull plug connector
with gold-plated contacts.
Lamp included.
Finishing section: Includes
door assembly with 360°
Aim-Lock™ lamp module sup-
port ring. Module indexing
provides easy maintenance
and relamping without re-
aiming. Active optical lenses
also are available. Door trim
locks into position with
two stainless steel captive,
tamper-resistant fasteners.
Finish: Natural aluminum or
bronze. Stainless steel door
is brushed finish. Aluminum
doors may be painted.
Electrical
Lamp type: Monochromatic
LED, 22W.
Power module: LED driver is
encapsulated in a custom-
designed heat-dissipating ep-
oxy resin that also eliminates
all moisture intrusion. Module
is provided with submersible
rated cord leads for connec-
tion to integral junction box
and lamp module.
Conduit entry: Two (2)
bottom or side entries
available. Box suitable for
through-branch wiring.
Splicing volume is 25 cubic
inches (410ccm).
Listings
U.L.,C.U.L., IP68.
Example: M9710 A 22LED RBL 120 SP FLC 34B IHL LP BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
12(30.5)
12(30.5)
12” Bronze or Aluminum Square 13” Stainless Steel Square
12” Bronze or Aluminum Round 13” Stainless Steel Round
13(33.0)
13(33.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
12(30.5)
16(40.7)
LED rough-in housingNotes1 Not available with M9730 or M9740 square model.
2 Accessories are mutually exclusive; choose one only.
3 Not available with CLC or CLF convex lens.
4 Accessory not available on "SS" door material.
5 Finish only available on aluminum door material.
6 Dimming available with 120V only.
7 Default conduit entry.
8 For lens load ratings and slip resistance, see page 655.
Flow-Through In-Grade
ORDERING INFORMATION
Visit www.hydrel.com for color changing LED specifications.
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com644
IN-G
RA
DE
Series13 Material Lamp type Voltage Distributions Lens
M9820 Round double lens A Aluminum
B Bronze
Incandescent1
P64500I PAR64, ext. mogul end prong10
P56300I PAR56, mogul end prong10
Metal Halide
200M E28, mogul
250M E28, mogul
320M E28, mogul
400M E37, mogul
High Pressure Sodium
250ST E18, mogul
400ST E18, mogul
120
208
220
240
277
347
SP Spot
NSP Narrow spot2
MFL Medium flood
WFL Wide flood2
WWD Wall wash10
VNSP Very narrow spot2
FLC Flat lens clear3
FLC5 5° axial spread
FLC10 Flat lens clear, 10° tilt
FLC20 Flat lens clear, 20° tilt
Conduit entry Options Lamped Finish11
1B 1" NPT bottom
12B 1/2" NPT bottom
12S 1/2" NPT side4
34B 3/4" NPT bottom12
34S 3/4" NPT side4
Internal accessories6
ISS Internal source shield5,10
IHL Internal honeycomb louver
WWL Wall wash louver
External accessories6
GS Glare shield
RG Rock guard
Trim ring
BTR Bronze trim ring
STR Stainless trim ring
Fusing
SF Single fuse7
DF Double fuse8
Ballast
SCWA Super constant wattage ballast9
LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
M9800Intended Use
The M9800 series modular
in-grade lights are multi-pur-
pose units designed for flush
mounting in soil or concrete.
The units consist of a factory-
sealed, thermally protected
lamp module and epoxy
encapsulated power module
placed in a secured rough-in
section (RIS) which includes
channeled convective cool-
ing, an integral junction box
and door assembly.
Construction
Finishing section: Includes
360° Aim-Lock™ support
ring, door assembly, tilt ring,
and module indexing seg-
ment providing maintenance
and relamping without
re-aiming. The lamp module
is suspended below the door
lens with a surface-adjust-
able, 10° tilt mechanism. The
insulating air layer reduces
surface temperatures. Doors
available in cast aluminum
or cast bronze, round. Two
stainless steel captive fasten-
ers lock the finishing section
into the rough-in section.
Rough-in section: Injection-
molded polymer cylinder
with integral junction box
for branch wiring (75 cubic
inches /1230ccm), U.V. stabi-
lized, impact- and corrosion-
resistant for use in many
environments. Houses power
module, lamp modules and
finishing components.3
Electrical
Lamp type: Incandescent –
PAR64 500W max. HID – E23,
E28, E37 and elliptical to 400W.
Socket: Incandescent - Mogul
end prong or GX16D base. HID
- Mogul or E40 base.
Power module: Ballast is
encapsulated in a custom-
designed heat-dissipating
epoxy resin to eliminate
all moisture intrusion to
the ballast. Provided with
submersible rated cord/
connector for connection to
integral junction box and
lamp module. HID ballasts
are magnetic.
Conduit entry: Two (2)
bottom or side entries
available. Box suitable for
through-branch wiring.
Splicing volume is 25 cubic
inches (410 ccm).
Listings
U.L., C.U.L., CE, NEMKO, IP68.
Example: M9820 A 400M 277 SP FLC 34B ISS SF LP BZ
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
18(45.7)
18(45.7)
27-1/2(69.9)
18(45.7)
16-1/8(41.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Incandescent models available with 120V only.
2 Only available with PAR lamps.
3 FLC will be used if lens is not chosen except for WWD distribution, then FLC5 will be used.
4 Not available with incandescent lamps.
5 Not available with WWD distribution.
6 Mutually exclusive; choose only one.
7 SF is only available with 120V, 277V or 347V on HID only.
8 DF is only available with 208V, 220V or 240V on HID only.
9 Standard on all metal halide lamps.
10 WWD and ISS not available with P56300I, P64500I.
10 Paint finish only available on aluminum doors
12 Default conduit entry.
13 For lens load ratings, slip resistance and temperatures, see page 655.
Flow-Through In-Grade
ORDERING INFORMATION
HID
Incandescent
PRODUCT INFORMATION
HYD
REL
645www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Accessories
Installation Accessories Safety Accessories
BTR Bronze trim ring STR Stainless trim ring RG Rock guard, bronze or aluminum LC Polycarbonate protective cover
GS Glare shield, bronze or aluminum
Light Control Accessories
IHL Internal honycomb louver WWL Wall wash louver ISS Internal source shield
FLC5 5° Axial spread lens FLC10 10° tilt lens FLC20 20° tilt lens
Door Material Options
A Aluminum door B Bronze door SS Stainless steel door
M9000Accessories and Door Material
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com646
IN-G
RA
DE
Series Material Lamp type Voltage Distribution Lens Conduit entry Options2, 4 Lamped
PDX4 In-grade5
PDX4ML Marker light
SS Stainless steel
BSS Brushed stainless steel2
B Bronze
M20 MR16, GX5.3, 20W max.
M35 MR16, GX5.3, 35W max.
M50 MR16, GX5.3, 50W max.
MR1120 MR11, GU4, 20W max.
MR1135 MR11, GU4, 35W max.
121
120
PDX4
NSP Narrow spot 3
SP Spot
NFL Narrow flood
WFL Wide flood3
FL Flood3
PDX4ML
ML180 180°
ML360 360°
FLC Flat lens clear
FLCAS Flat lens clear, anti-slip2
FLSR Flat lens, slip resistant2
12S Two 1/2" NPT side (standard)
12B Two 1/2" NPT bottom
Internal accessories
IHL Internal honeycomb louver
LSF Linear spread filter
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
LPI Lamp included
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush-mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel.
Housing: Die-cast bronze
and injection-molded
thermoplastic. The housing
is U.V. stabilized, impact- and
corrosion-resistant for use in
all types of environments.
Finish: Natural bronze or stain-
less steel with a brushed finish.
Optics
Lens/seal: Tempered clear
flat borosilicate glass. The
patent-pending door/lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Two captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Electrical
Lamp: MR16 GX5.3 base or
MR11GU4 base. Conduit en-
try: Two 1/2" NPT side entries
standard, two 1/2" bottom
entries are optional.
Power supply: Optional inte-
grally mounted transformer,
prewired for easy installation
and maintenance.
Listings
U.L., C.U.L.,CSA-U.S., CSA,
IP68.
Example: PDX4 B M35 120 NSP FLC 12S IHL LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
4(10.2)
5(12.7)
5(12.7)
4(10.2)
8(20.3)
5(12.7)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Low voltage Line voltage
In-grade
Low voltage Line voltage
Marker Light
5(12.7)
5(12.7)
8(20.3)
5(12.7)
3-7/8(9.9)
3-7/8(9.9)
Notes1 Transformer sold separately.
2 Only available if PDX4 is chosen.
3 Not available with MR11 lamps.
4 Only one accessory available.
5 For lens load ratings, slip resistance and temperatures, see page 655.
PDX4Paradox™ 4" Architectural In-Grade
Sealed In-Grade
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
647www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series MaterialLamp type LED color Voltage Distribution Lens Conduit entry Options Lamped
PDX4 In-grade3
PDX4ML Marker light
SS Stainless steel
BSS Brushed stainless steel1
B Bronze
9LED CLW Cool white
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RED Red
RBL Royal blue
122
MVOLT
PDX4
SP Spot
MFL Medium flood
PDX4ML
ML180 180°
ML360 360°
FLC Flat lens clear
FLCAS Flat lens clear, anti-slip1
FLSR Flat lens, slip resistant1
12S Two 1/2" NPT side (standard)
12B Two 1/2" NPT bottom
TKO Tilt kit optic1
LPI LED array included
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush-mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel.
Housing: Die-cast bronze
and injection-molded
thermoplastic. The housing
is U.V. stabilized, impact- and
corrosion-resistant for use in
all types of environments.
Finish: Natural bronze or stain-
less steel with a brushed finish.
Lens/seal: Tempered clear
flat borosilicate glass. The
patent-pending door/lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Two captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Electrical
LED: Monochromatic LED, 9W.
Conduit entry: Two 1/2"
NPT side entries standard;
two 1/2" bottom entries are
optional.
Power supply: Integrally
mounted modular LED driver,
prewired for easy installation
and maintenance.
Listings
CSA-U.S., CSA, IP68.
Example: PDX4 B 9LED CLW MVOLT SP FLC 12S TKO LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
4(10.2)
5(12.7)
5(12.7)
4(10.2)
8(20.3)
5(12.7)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
5(12.7)
5(12.7)
8(20.3)
5(12.7)
3-7/8(9.9)
3-7/8(9.9)
Notes1 Only available if PDX4 is chosen.
2 Transformer sold separately.
3 For lens load ratings and slip resistance, see page 655.
Sealed In-Grade
ORDERING INFORMATION
PDX4Paradox™ 4" Architectural In-Grade
Monochromatic LED
Low voltage Line voltage
In-grade
Low voltage Line voltage
Marker Light
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com648
IN-G
RA
DE
Series22 Material Lamp type Voltage Distribution
PDX7 In-grade
PDX7CL In-grade with cool lens
SS Stainless steel
BSS Brushed stainless steel12
B Bronze
Low voltage1
M20 MR11, GZ4
M35 MR11, GZ4
M50 MR16, GX5.3
M75 MR16, GX5.3
P3650 PAR36, screw terminal
P3675 PAR36, screw terminal
AR11135 G53
AR11150 G53
AR11175 G53
Incandescent2
P2050I PAR20, medium
P3050I PAR30, medium
HID
20MHCP PGJ59
20MHCG GU6.510
20CMT4 T4, G8.511, 17
35CMT4 T4, G8.5
70CMT4 T4, G8.511, 17
35CMT6 T6, G1218
70CMT6 T6, G1218
P2035CM PAR20, medium
P3035CM PAR30, medium
P3070CM PAR30, medium
R11135CM GX8.5
R11170CM GX8.5
Fluorescent 4 , 13
18TRT Triple tube, GX24q2
26TRT Triple tube, GX24q3
123
120
208
240
277
347
MVOLT5
NSP Narrow spot
SP Spot
NFL Narrow flood
MFL Medium flood
WFL Wide flood
FL Flood19
WWD Wall wash distribution6
Lens Conduit entry Options Lamped
FLC Flat lens clear
FLCAS Flat lens clear, anti-slip12
FLSR Flat lens, slip resistant12
34S Two 3/4" NPT side (standard) Internal accessories
IHL Internal honeycomb louver16
ISS Internal source shield7
WWL Wall wash internal louver8
LSF Linear spread filter
CFAMB Color filter amber
CFGRN Color filter green
CFRED Color filter red
External accessories
RG Decorative rock guard
GS Glare shield21
Fusing
SF Single fuse14
DF Double fuse15
Ballast
GEB Electronic ballast20
LPI Lamp included
PDX7Paradox™ 7" Architectural In-Grade
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush-mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel,
available with die-cast brass
extension for cool application.
Housing: Compression-
molded polyester with
patent-pending internal
direct access junction box
for through-branch wiring.
Internal junction box pro-
vides 44 cubic inches volume
to ensure proper seal during
installation. The housing is
U.V. stabilized, impact- and
corrosion-resistant for use
in all types of environments.
The housing has a sidecar
configuration and houses
the lamp and power module
components as well as the
lens/door finishing section.3
Lens/seal: Tempered clear
flat borosilicate glass. The
patent-pending door/lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Three captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Finish: Natural bronze or
stainless steel with a brushed
finish. Bronze doors may be
painted. Consult factory for
color options.
Optics
Reflectors (non-reflectorized
lamps): High-purity anodized
specular or semi-specular
materials in various distribu-
tions provide maximum
performance and uniformity.
Lamps can be aimed 15° from
vertical and rotated 360°. All
configurations available with
Hydrel's patented Aim-Lock™
locking components to allow
re-lamping and maintenance
without re-aiming.
Electrical
Low voltage: MR11 GZ4 base,
35W max. MR16 GX5.3 base,
75W max., PAR36 screw ter-
minal base, 75W max. AR111
G53 base, 75W max.
Incandescent: PAR20, PAR30,
medium base.
HID: T4 or T6 bi-pin base,
70W max PAR-20 or PAR-30
medium base, 70W max color
corrected metal halide.
Fluorescent: Triple-tube CFL
4-pin base, 26W max.
If a specific lamp is desired,
specify manufacturer's lamp
number; most lamps can be
supplied. Lamp included.
Conduit entry: Two
molded 3/4" NPT side entries
standard; bottom hubs are
molded with a 3/4" NPT
membrane knockout.
Ballast: Integrally mounted
modular ballast package,
prewired with quick con-
nectors for easy installation
and maintenance. Ballasts
are rated for low starting
temperatures. High power
factor magnetic ballasts
standard; electronic ballasts
also available.
Listings
U.L., C.U.L.
Example: PDX7 B 35CMT6 120 NSP FLC 34S RG LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
9(22.9)
15(38.1)
5(12.7)
8(20.3)
7(17.8)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes
1 Low voltage only available with 12V, 120V, 240V, 277V inputs.
2 Incandescent models are available with 120V only.
3 Available for low voltage lamps only.
4 18TRT or 26TRT available with MVOLT only.
5 Available with HID if GEB chosen, standard with fluorescent lamps.
6 Available with T4 G8.5 base, 20MH PGJ5 base, and 20MH GU6.5 base.
7 Available with T6 and T4 lamps in NSP distribution only. Not valid with WWD.
8 Available with HID if GEB chosen, standard with fluorescent lamps.
9 Philips Mini MasterColor available in 20W and 120V GEB only.
10 GE Mini UltraMax available in 20W and120V GEB only.
11 20CMT4, 35CMT4 or 70CMT4 only valid with MVOLT and GEB.
12 Not available with decorative rock guard.
13 Available only in MFL light distribution.
14 SF is available only with 120V, 277V or 347V on HID.
15 DF is available only with 208V, 220V or 240V on HID.
16 IHL not available with color filters.
17 Available with NSP, MFL and WWD only.
18 Available with NSP, MFL and WFL only.
19 Only available with PAR lamps.
20 HID only.
21 SS door only.
22 For lens load ratings, slip resistance and tempera-tures, see page 655.
Sealed In-Grade
ORDERING INFORMATION
15(38.1)
10(25.4)
5(12.7)
Standard Housing Cool Lens Housing
PRODUCT INFORMATION
HYD
REL
649www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series3 Material Lamp type LED color Voltage Distribution Lens Conduit entry Options Lamped
PDX7 SS Stainless steel
BSS Brushed stainless steel1
B Bronze
12LED CLW Cool white
CLWHO Cool white - high output
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RED Red
RBL Royal blue
MVOLT SP Spot
MFL Medium flood
WFL Wide flood
LSD Linear spread distribution
FLC Flat lens clear
FLCAS Flat lens clear, anti-slip1
FLSR Flat lens frosted, slip resistant1
34S Two 3/4" NPT side (standard)
Internal accessories
IHL Internal honeycomb louver
External accessories
RG Decorative rock guard
GS Glare shield2
LPI LED array included
PDX7Paradox™ 7" Architectural In-Grade
Monochromatic LED
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel.
Housing: Compression-
molded polyester with
patent-pending internal
direct-access junction box
for through-branch wiring.
Internal junction box pro-
vides 44 cubic inches volume
to ensure proper seal during
installation. The housing is
U.V. stabilized, impact- and
corrosion-resistant for use
in all types of environments.
The housing has a sidecar
configuration and houses
the lamp and power module
components as well as the
lens/door finishing section.
Finish: Natural bronze
or stainless steel with a
brushed finish.
Optics
Lens/seal: Tempered clear
flat borosilicate glass. The
patent-pending door/lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Three captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Electrical
LED: Monochromatic LEDs,
12W.
Conduit entry: Two
molded 3/4" NPT side entries
standard; bottom hubs are
molded with a 3/4" NPT
membrane knockout.
Power module: Integrally
mounted modular LED driver,
prewired with quick connec-
tors for easy installation and
maintenance.
Listings
U.L., C.U.L.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
9(22.9)
15(38.1)
5(12.7)
8(20.3)
7(17.8)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Not available with decorative rock guard.
2 SS door only
3 For lens load ratings and slip resistance, see page 655.
Sealed In-Grade
Example: PDX7 B 12LED CLW MVOLT SP FLC 34S LPIORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com650
IN-G
RA
DE
Series14 Material Lamp type Voltage Distribution
PDX10 In-grade
PDX10CL In-grade with cool lens
SS Stainless steel
BSS Brushed stainless steel8
B Bronze
Incandescent1
P3050I PAR30, medium
P38100I PAR38, medium
P3075I PAR30, medium
P38150I PAR38, medium
100Q T4, mini can
150Q T4, mini can
Fluorescent3, 9
18TRT Triple tube, GX24q2
26TRT Triple tube, GX24q3
32TRT Triple tube, GX24q3
42TRT Triple tube, GX24q3
Metal halide
35CMT4 T4, G8.57
70CMT4 T4, G8.57
P3035CM PAR30 medium2
P3070CM PAR30 medium2
R11135CM GX8.52
R11170CM GX8.52
35CMT6 T6, G-122
70CMT6 T6, G-12
150CMT6 T6, G-122
50M E17, medium2
70M E17, medium
70CM E17, medium
100M E17, medium
100CM E17, medium
150M E17, medium2
150CM E17, medium2
P3870M PAR38, medium10
P3870CM PAR38, medium10
P38100M PAR38, medium10
P38100CM PAR38, medium10
High pressure sodium
50S E17, medium2
70S E17, medium
100S E17, medium
150S E17, medium
120
208
220
240
277
347
MVOLT4
NSP Narrow spot11
SP Spot
NFL Narrow flood
MFL Medium flood
WFL Wide flood
FL Flood
WWD Wall wash distribution
Lens Conduit entry Options Lamped
FLC Flat lens clear
FLCAS Flat lens clear, anti slip8
FLCSR Flat lens frosted, slip resistant8
34S Two 3/4" NPT side (standard) Internal accessories
IHL Internal honeycomb louver
ISS Internal source shield5
WWL Wall wash internal louver6
LSF Linear spread filter
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
External accessories
RG Decorative rock guard
Fusing
SF Single fuse12
DF Double fuse13
Ballast
GEB Electronic ballast4
LPI Lamp included
PDX10Paradox™ 10" Architectural In-Grade
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush-mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel.
Housing: Compression-
molded polyester with
patent-pending internal
direct-access junction box
for through-branch wiring.
Internal junction box pro-
vides 44 cubic inches volume
to ensure proper seal during
installation. The housing is
U.V. stabilized, impact- and
corrosion-resistant for use
in all types of environments.
The housing has a sidecar
configuration and houses
the lamp and power module
components as well as the
lens/door finishing section.
Lens/seal: Tempered clear
flat borosilicate glass. The
patent-pending door/lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Four captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Optics
Reflector (non-reflectorized
lamps): High-purity anodized
specular or semi-specular
materials in various distribu-
tions provide maximum
performance and uniformity.
Lamps can be aimed 15° from
vertical and rotated 360°. All
configurations available with
indexed and locking compo-
nents to allow re-lamping
and maintenance without
re-aiming.
Electrical
Conduit entry: Two
molded 3/4" NPT side entries
standard; bottom hubs are
molded with a 3/4" NPT
membrane knockout.
Ballast: Integrally mounted
modular ballast package,
prewired with quick con-
nectors for easy installation
and maintenance. Ballasts
are rated for low starting
temperatures. High power
factor magnetic ballasts
standard; electronic ballasts
also available.
Listings
U.L., C.U.L.
Example: PDX10 B 35CMT6 120 NSP FLC 34S RG LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
12(30.5)
12(30.5)
18(45.7)
10(25.4)
6(15.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Incandescent models are available with 120V only.
2 220V not available.
3 Available with MVOLT only.
4 If GEB and HID lamp source are chosen, use MVOLT.
5 Available with E17, T6 and T4 lamps in NSP distribution only. Not valid with WWD.
6 Available only with WWD distributions or TRT lamps.
7 35CMT4 or 70CMT4 only valid with MVOLT and GEB.
8 Not available with decorative rock guard.
9 Available only in MFL, WWD or WFL light distribution.
10 PAR38 lamps only available with SP or FL distributions.
11 NSP only valid with T4 or T6 lamps.
12 SF is available only with 120V, 277V or 347V on HID.
13 DF is available only with 208V, 220V or 240V on HID.
14 For lens load ratings, slip resistance and temperatures, see page 655.
Sealed In-Grade
ORDERING INFORMATION
18(45.7)
14(35.7)
Standard Housing Cool Lens Housing
PRODUCT INFORMATION
HYD
REL
651www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series4 Material Lamp type LED color Voltage Distribution Lens
PDX10 SS Stainless steel
BSS Brushed stainless steel1
B Bronze
22LED 22W CLW Cool white
CLWHO Cool white, high output
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RED Red
RBL Royal blue
1202
MVOLT
SP Spot, clear flat lens
MFL Medium flood, clear flat lens
WFL Wide flood, clear flat lens
LSD Linear spread distribution, clear flat lens
FLC Flat lens clear
FLCAS Flat lens clear, anti slip1
FLSR Flat lens frosted, slip resistant1
Conduit entry Options Lamped
34S Two 3/4" NPT side (standard)
Internal accessories
IHL Internal honeycomb louver
External accessories
RG Decorative rock guard
Ballast
LDIM 0-10V dimming3
LPI Lamp included
PDX10Paradox™ 10" Architectural In-Grade
Monochromatic LED
Intended Use
Hydrel's Paradox Series
sealed modular in-grade
luminaires are multi-purpose
units designed for uplighting
architectural and landscape
features. These units can be
flush-mounted into a variety
of substrates or landscape
materials, and are ideal when
aperture size or luminaire
depth is a priority.
Construction
Door material: Die-cast
bronze or stainless steel.
Housing: Compression-
molded polyester with
patent-pending internal
direct-access junction box
for through-branch wiring.
Internal junction box pro-
vides 44 cubic inches volume
to ensure proper seal during
installation. The housing is
U.V. stabilized, impact- and
corrosion-resistant for use
in all types of environments.
The housing has a sidecar
configuration and houses
the lamp and power module
components as well as the
lens/door finishing section.
Optics
Lens ⁄seal: Tempered clear
flat borosilicate glass. The
patent-pending door⁄ lens
seal uses proprietary knife
edge technology to secure
the assembly to the housing.
Four captive screws hold the
assembly in place. The lens is
notched to provide maximum
aperture opening.
Electrical
LED type: 22W Monochro-
matic or color changing.
Conduit entry: Two
molded 3/4" NPT side entries
standard; bottom hubs are
molded with a 3/4" NPT
membrane knockout.
Power module: Integrally
mounted modular LED
driver, prewired with quick
connectors for easy installa-
tion and maintenance.
Control: Standard DMX512.
3-channels per fixture: Red,
Green, Blue or 4.
Communication to fixture:
DMX512 direct.
Listings
U.L., C.U.L.
Example: PDX10 SS 22LED CLW MVOLT SP FLC 34S IHL LPI
Sealed In-Grade
12(30.5)
12(30.5)
18(45.7)
10(25.4)
6(15.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Not available with RG option.
2 Only valid with LDIM.
3 Only valid with 120V.
4 For lens load ratings, slip resistance and temperatures, see page 655.
ORDERING INFORMATION
Monochromatic Housing
Visit www.hydrel.com for color changing LED specifications.
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com652
AccessoriesIN
-GR
AD
E
PARADOX™
RG Decorative Rock Guard
WWL Wallwash Louver IHL Internal Honeycomb Louver ISS Internal Source Shield GS Glare Shield Stainless Steel(PDX7 only)
TKO 5° Tilt Lens Filter(PDX4 only)
TKO 10° Tilt Lens Filter(PDX4 only)
TKO 15° Tilt Lens Filter(PDX4 only)
TKO kit includes 5°, 10° and 15° tilt fi lters and the 5° axial spread fi lter.
TKO 5° Axial Spread Filter
FLCAS Anti-Slip Lens FLSR Slip-Resistant Lens
Safety Accessories
Light Control Accessories
NotesFor visual representation only; not scaled proportionately.
PRODUCT INFORMATION
HYD
REL
653www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series Material Lamp type Voltage Distribution Lens15
6700 B Bronze Incandescent1
P3050I
P3075I
P38100I
P38150I
P38250I
100Q
250Q
Fluorescent2
18TRT
26TRT
32TRT
42TRT
Metal halide
100M
150M
P38100M
P3870M
Ceramic metal halide
70CMT6
150CMT6
70CM
100CM
150CM
P38100CM
P3870CM
High pressure sodium
50S
70S
100S
150S
120
208
240
277
347
MVOLT3
SP Spot5
NSP Narrow spot4
NFL Narrow flood
FL Flood5
MFL Medium flood
WFL Wide flood5
WWD Wall wash distribution
CLC Convex lens clear
CLF Convex lens frosted
FLC Flat lens clear
FLC5 Flat lens clear, 5° axial spread
FLC10 Flat lens clear, 10° tilt
FLF Flat lens frosted
FLC20 Flat lens clear, 20° tilt
FLCAS Flat lens clear, anti-slip
Conduit entry Options15 Lamped
12B 1/2" NPT bottom
34B 3/4" NPT bottom (default)
12S 1/2" NPT side
34S 3/4" NPT side
Internal accessories
IHL Internal honeycomb louver
ISS Internal source shield6
WWL Wall wash louver7
ITB Internal tilt bracket14
Filters
LSF Linear spread filter
CFAMB Color filter amber13
CFBLU Color filter blue13
CFGRN Color filter green13
CFRED Color filter red13
External accessories8
GS Glare shield
LS Light shield
RG Rock guard9
BTR Bronze trim round
Fusing
SF Single fuse10
DF Double fuse11
Ballast12
GEB Electronic ballast
LP Lamp installed
6700Intended Use
The 6700 Series sealed
outdoor lighting fixture
offers high performance and
durability in an in-grade fix-
ture. Many lamping options
and distributions are avail-
able, including HID lamps to
100W. Integral ballast and
junction box further add to
the series' reliability.
Construction
Material: Heavy wall cast
bronze body and door.
Finish: Raw bronze.
Optics
Reflector (non-reflectorized
lamps): High-purity anodized
specular or semi-specular ma-
terials in various distributions
provide maximum perfor-
mance and uniformity. Lamps
or reflectors are adjustable.
Lens: Tempered clear flat
borosilicate glass.
Electrical
Conduit entry: Two 1/2" or
3/4" NPT entries available,
bottom or side.
Ballast: Integrally mounted
ballast, rated for low starting
temperatures.
Listings
U.L., C.U.L., IP67.
Example: 6700 B 70CMT6 MVOLT NSP FLC 34B ISS GEB LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
13-3/4(34.9)
10-1/2(26.7)
9-1/4(23.5)
1/4(0.6)
18-1/8(46.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Incandescent models available with 120V only.
2 Fluorescent models available with 347V or MVOLT (120-277V) only.
3 Standard on fluorescent lamps and metal halide lamps with GEB ballasts.
4 NSP only available with T4 or T6 lamps.
5 Not available with T6 lamps, FL only available with PAR lamps.
6 ISS not available with WWD distribution or P38 lamp type.
7 Only available with wall wash distribution (WWD).
8 Accessories are mutually exclusive. Choose one.
9 RG not available with CLC or CLF lenses.
10 SF only is available with 120V, 277V or 347V on HID only.
11 DF only is available with 208V or 240V on HID only.
12 Electronic ballasts only are available with metal halide lamps and MVOLT voltage.
13 Color filter available to 100W max.
14 ITB only available with NSP and MFL.
15 See page 645 for visual representation.
Sealed In-Grade
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com654
IN-G
RA
DE
Series Lamp type Voltage Distribution Lens Mounting Conduit entry
WD9100 Wet-dry in-grade
Incandescent1
P38100I PAR38, medium
P38150I PAR38, medium
P38250I PAR38, medium
Quartz3
100Q T4, MC
150Q T4, MC
120 SP Spot1
NFL Narrow flood2
MFL Medium flood
FL Flood1, 3
WFL Wide flood4
WWD Wall wash distribution5
FLC Flat lens clear
FLC5 Flat lens clear, 5° axial spread
FLC10 Flat lens clear, 10° tilt
FLC30 Flat lens clear, 30° spread
FLF Flat lens frosted
FLCAS Flat lens clear, anti-slip
NM Niche mount6
BM Base mount7
34B 3/4" NPT bottom
12B 1/2" NPT bottom
Options Cord set length Lamped
IHL Internal honeycomb louver
MSR Modular support ring
STR Stainless steel trim ring, round
CSL_ 10'-120' of cord available in 5' increments LP Lamp installed
WD9100Intended Use
The WD9100 Series wet/
dry up lights represent the
state-of-the-art in flush up
light construction. These
multi-purpose modular units
are designed for mounting in
areas that are prone to being
submerged in water.
Construction
Door material: Cast bronze
door with rock guard. Door
locks the lamp housing into
the rough-in section with a
single tamperproof stain-
less fastener.
Rough-in section: Injection-
molded ABS, U.V. stabilized,
impact- and corrosion-
resistant for use in all types
of environments.
Lamp module housing: Stain-
less steel, sealed and purged
of all moisture. Integral cord
set attached. Cord entrance
has a brass water-tight seal
and is epoxy encapsulated.
Thermally protected.
Cord: NM – Minimum of 35'
of 16-3 STWA , submersible
cord for connection to a
remote junction box (sold
separately). BM – Minimum
of 10' of 16-3 STWA submers-
ible cord. Bronze junction box
included. Cord length must
be specified.
Optics
Active lenses may be used
with PAR lamps to modify
the distributions.
Electrical
Lamp type: T-4 mini-can
lamps to 150W. PAR-38 lamps
to 250W. Lamps included.
Conduit entry: 1/2" and
3/4" NPT bottom openings
are available in the cast
bronze integral junction box.
Suitable for through-branch
wiring. Junction box has 24
cubic inches of volume.
Listings
U.L.
Example: WD9100 P38100I 120 SP FLC NM 34B IHL CSL30 LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
12(30.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
12(30.5)
11(27.9)
Niche Mount
12(30.5)
11(27.9)
Base Mount
Notes1 PAR38 lamps are available only with SP or FL distributions; lens op-
tions available for modifying PAR38 distributions.
2 NFL distribution requires a FLC30 lens.
3 FL distribution is not available with 100Q or 150Q.
4 WFL distribution requires a FLF lens.
5 WWD distribution requires a FLC5 lens.
6 NM mounting does not come with an underwater junction box.
7 BM mounting comes with an underwater junction box.
Wet-Dry In-Grade
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
655www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Technical Information
Notes1 Per Ceramic Tile Institute: Coefficient of
friction values greater than 0.6 are considered slip resistant. Coefficient of friction values between 0.50 to 0.60 are conditionally slip resistant. Coefficient of friction values less than 0.50 are questionable.
2 Test performed by: SGS U.S. Testing Company Inc. Tested in accordance with ISO/ICE 17025.
3 Test performed by: Spec Testing, Inc. Tested in accordance with ISO/ICE 17025.
The M9000 Series offers reduced lens surface tem-
peratures through the use of thermal isolation and
patented convective cooling technologies. As with the
use of all luminaires in pedestrian areas, Hydrel rec-
ommends that proper care be taken in the selection
of luminaire location, lamp wattage and distribution
in order to minimize pedestrian risk.
M9400 LENS SURFACE TEMPERATURE2
20W T4 MH
35W T6 MH
70W T6 MH
75W MR16
70W PAR30 MR16
70W PAR30 INCAN
NSP MFL NSP MFL NSP MFL NFL SP MFL
SINGLE LENS 69°C 66°C 82°C 89°C 117°C 119°C 107°C 120°C 107°C
DOUBLE LENS 49°C 46°C 54°C 53°C 75°C 73°C 70°C 82°C 90°C
% DECREASE 28% 30% 34% 40% 36% 39% 35% 32% 16%
SLIP RESISTANCE AND LOAD RATING
M9400 M9700 M9800
MAXIMUM LOAD RATINGPeak compression force of 7,700 lbs. (single lens) or 2,550 lbs. (double lens).
LENS STATIC COEFFICIENT of FRICTIONM9400 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10
M9400 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67
MAXIMUM LOAD RATINGPeak compression force of 3,750 lbs. (single lens) or 3,200 lbs. (double lens).
LENS STATIC COEFFICIENT of FRICTIONM9700 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10
M9700 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67
MAXIMUM LOAD RATINGPeak compression force of 3,950 lbs. (double lens).
LENS STATIC COEFFICIENT of FRICTIONM9800 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10
M9800 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67
SLIP RESISTANCE AND LOAD RATING
PDX4 PDX7 PDX10
MAXIMUM LOAD RATINGPeak compression force of 2,048 lbs.
LENS COEFFICIENT OF FRICTION1
PDX4 Anti-Slip Lens (FLCAS): Dry = 0.78; Wet = 0.30
PDX4 Slip Resistant Lens (FLSR): Dry = 0.68; Wet = 0.59
MAXIMUM LOAD RATINGPeak compression force of 2,847 lbs.
LENS COEFFICIENT OF FRICTION1
PDX7 Anti-Slip Lens (FLCAS): Dry = 0.63; Wet = 0.20
PDX7 Slip Resistant Lens (FLSR): Dry = 0.81; Wet = 0.57
MAXIMUM LOAD RATINGPeak Compression Force of 4,944 lbs.
LENS COEFFICIENT OF FRICTION1
PDX10 Anti-Slip Lens (FLCAS): Dry = 0.63; Wet = 0.20
PDX10 Slip Resistant Lens (FLSR): Dry = 0.81; Wet = 0.57
M9700 LENS SURFACE TEMPERATURE2
100W E17 MH 150W T6 MH 150W E17 MH 32 W TRT 70W T6 MH 100W PAR38 MH 250W PAR38 INCAN
SP NFL WFL SP NSP MFL SP MFL WFL SP MFL SP MFL WFL SP FL
SINGLE LENS 114°C 94°C 112°C 119°C 129°C 153°C 107°C 120°C 107°C 69°C 68°C 89°C 104°C 98°C 110°C NA
DOUBLE LENS 70°C 85°C 75°C 73°C 93°C 139°C 70°C 82°C 90°C 43°C 44°C 55°C 97°C 65°C 70°C 89°C
% DECREASE 38% 10% 33% 38% 28% 39% 35% 32% 16% 38% 35% 38% 7% 34% 36% NA
M9800 LENS SURFACE TEMPERATURE2
250W E28 MH 400W E37 MH
SP MFL SPSP w/
ISSMFL
DOUBLE LENS 49°C 46°C 54°C 53°C 75°C
PDX4 LENS SURFACE TEMPERATURE3
20W MR16 35W MR16 50W MR16 20W MR11 35W MR11 9W LED
SP NSP FL SP NSP FL SP NSP FL NFL SP SP MFL
PDX4 LENS 79.5°C 77.5°C 81°C 122.8°C 119°C 123°C 134°C 131°C 148°C 87°C 113°C 33°C 35°C
PDX7 LENS SURFACE TEMPERATURE3
20W T4 MH 35W T4 MH 70W T4 MH 36 W T6 MH 70W T6 MH 70W PAR30 MH 70W PAR30 INCAN 75W MR16
NSP SP MFL NSP SP MFL NSP SP MFL NSP SP MFL NSP SP MFL SP MFL MFL
PDX7 LENS 70°C 75°C 71°C 95°C 112°C 94°C 133°C 152°C 125°C 95°C 90°C 92°C 129°C 123°C 119°C 125°C 118°C 106°C
PDX7CL LENS 43°C 44°C 44°C 53°C 55°C 57°C 73°C 69°C 66°C 52°C 47.8°C 50°C 63°C 62°C 67°C 62°C 68°C 53°C
% DECREASE 39% 42% 38% 44% 51% 39% 45% 55% 47% 45% 47% 46% 51% 50% 44% 50% 42% 50%
LENSLoad Ratings, Slip Resistance and Lens Temperatures
PDX10 LENS SURFACE TEMPERATURE3
70W T6 MH
150W T6 MH 100W E17 MH 150W E17 MH 100W PAR38
MH
150W PAR38 INCAN
150W E17 HPS 42W TRT FLUOR
SP NFL FL SP NFL FL SP NFL FL SP NFL FL MFL MFL SP NFL FL SP NFL FL
PDX10 LENS 79°C 83°C 86°C 99°C 105°C 108°C 95°C 115°C 114°C 115°C 148°C 143°C 98°C 96°C 113°C 138°C 139°C 70°C 71°C 68°C
PDX10CL LENS 51°C 55°C 55°C 60°C 77°C 72°C 60°C 76°C 75°C 68°C 88°C 92°C 65°C 69°C 75°C 75°C 83°C 43°C 46°C 43°C
% DECREASE 35% 33% 36% 39% 27% 33% 37% 34% 34% 41% 40% 36% 34% 28% 34% 46% 40% 39% 35% 37%
The Paradox™ Architectural In-grade Cool Lens model (PDX7CL &
PDX10CL) utilizes a combination brass top ring, heat sink, and reflec-
tive secondary IR lens filter to reduce heat by 30% when necessary. As
with the use of all luminaires in pedestrian areas, Hydrel recommends
that the proper care be taken in the selection of luminaire location, lamp
wattage and distribution, in order to minimize pedestrian risk.
M9000 Series
PDX Series
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com656
IN-G
RA
DE
Series Material Lamp type Voltage Distribution4 Conduit entry Grill Options Lamped Finish6
9310 A Aluminum
B Bronze
Low voltage
M20
M35
M50
Incandescent
P2035I
P2050I
Ceramic metal halide
20CMT41
35CMT41,7
P2035CM1,7
122
120
208
220
240
277
347
MVOLT3
NSP Narrow spot
SP Spot
NFL Narrow flood
FL Flood
MFL Medium flood
WFL Wide flood
12B 1/2" NPT bottom
34B 3/4" NPT bottom8
LC Lexan cover
Ballast
GEB Electronic ballast5
LP Lamp installed
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
9310Intended Use
The 9310 Series is designed
for flush mounting in plant-
ers and open lawn areas.
Construction
Grill: Cast aluminum painted
or cast bronze natural finish.
Well: Thick wall A.B.S. pipe.
Lamp housing: Cast alumi-
num or bronze body with fins
for heat dissipation.
Electrical
Lamp type: Incandescent
– PAR20, 50W max. Low volt-
age – MR16, 50W max. HID –
PAR20 HID, T4, 35W max.
Conduit entry: Interconnect-
ing conduit shall be 1/2"
galvanized pipe, with brass
cord seal.
Listings
U.L., CSA.
Example: 9310 B M50 120 NSP 34B LC LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Requires GEB ballast option.
2 Transformer sold separately.
3 MVOLT is standard on all metal halide lamps.
4 Not all distributions available on all lamp types.
5 Electronic ballasts are only available with metal halide lamps and MVOLT voltage.
6 Finish available on aluminum fixtures only.
7 T4 lamps only available with SP and MFL distribution.
8 Default conduit entry.
9310 Incandescent, Low Voltage (No Transformer)
9310 HID, Low Voltage (With Transformer)
10(25.4)
20(50.8)
7 Grill (17.8)
7 Grill (17.8)
7 (17.8)4-1/2(11.4)
7 (17.8)4-1/2(11.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Well Lights
ORDERING INFORMATION
Visit www.hydrel.com for color changing LED specifications.
PRODUCT INFORMATION
HYD
REL
657www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series Material Lamp type Voltage Distribution6 Lens Conduit entry
9330
9335
A Aluminum2
B Bronze
Low voltage
M20
M75
P3636ILV
P3650ILV
Incandescent1
P2050I
P3050I
P3075I
Ceramic metal halide
100CM
P2035CM
P3035CM
P3070CM
Metal halide
50M
70M
100M
High pressure sodium
50S
70S
100S
123
120
2084
240
277
347
MVOLT5
NSP Narrow spot12
SP Spot
MFL Medium flood
NFL Narrow flood
FL Flood
WFL Wide flood12
CLC Convex lens clear
CLF Convex lens frosted
34B 3/4" NPT bottom
Grill Options Lamped Finish10
DEL Directional eggcrate louver (square)2
FEL Full eggcrate louver (square)2
DL Directional louver (round)
CPC Clear polycarbonate (round)2
Internal accessories
ASR Aim set ring2
IHL Internal honeycomb louver11
Fusing
SF Single fuse7
DF Double fuse8
Ballast
GEB Electronic ballast2
LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
9330 9335
Intended Use
The 9330 Series is designed
for flush mounting in planter,
tree grates or open lawn
areas. The 9335 Series is
designed for mounting in
standard Neenah tree grates.
Construction
Grill: Cast aluminum or
bronze; locks to well with
two set screws. Full eggcrate
louver or directional eggcrate
louver square grills and
directional louver or clear
polycarbonate cover round
grills are available. Eggcrate
directional louvers provide
30° cut-off.
Lamp module housing:
Stainless steel, sealed and
purged of all moisture to
100°F (38°C) and mounted
integral with grill. Angular
adjustment up to 15°. Electri-
cal access to lamp module is
done through submersible
rated connector. Thermally
protected. Lamp included.
Well: Thick wall polypropyl-
ene pipe.
Optics
Lens: Tempered glass lens.
Convex lens clear (CLC) is
standard. Convex lens frosted
(CLF) also available.
Electrical
Power module: Sealed unit
encapsulated in an engi-
neered composite resin to
eliminate all water entry.
Conduit entry: Two 3/4" NPT
openings in the bottom of
the junction box 25 cubic
inches of volume suitable for
through-branch wiring. Fix-
ture/junction box connecting
conduit is 1/2" galvanized
pipe with brass cord seal.
Listings
U.L., CSA, IP67.
Example: 9330 B P3070CM MVOLT SP CLC 34B DL ASR GEB LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
18-1/2(47.0)
8-1/4(21.0)
8-3/4(22.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
9330 HID w/ASR
18(45.7)
8-1/4(21.0)
8-3/4(22.2)
9330 Incandescent
Clear Polycarbonate (CPC)
Full EggcrateLouver (FEL)
Directional EggcrateLouver (DEL)
Directional Louver (DL)
9-1/2(24.1)
9-1/2(24.1)
9-1/2(24.1)
9-1/2(24.1)
Notes1 Incandescent models available with 120V only.
2 Not available with 9335.
3 Transformer sold separately.
4 208V not available with low-voltage fixtures.
5 Only available with GEB option.
6 Not all distributions available with all lamp types. Check lamp manufacturers specification.
7 SF available with 120V, 277V or 347V with HID only.
8 DF available with 208V, 220V or 240V with HID only.
9 Electronic ballasts are only available with metal halide lamps and MVOLT voltage.
10 Finish available on aluminum fixtures only.
11 Not available with MH, HPS or P30I WFL.
12 WFL and NSP are only available with incandescent, PAR and MR16 lamps.
Well Lights
1/2(1.3)
20(50.8)
20(50.8)
10-3/8(27.0)
10-3/8(27.0)
10-3/8(27.0)
10-1/2(26.7)
10-1/2(26.7)
9335 HID 9335 Incandescent
ORDERING INFORMATION
Visit www.hydrel.com for color changing LED specifications.
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com658
IN-G
RA
DE
Series Material Lamp type Voltage Distribution Lens Conduit entry
9350 A Aluminum
B Bronze
Quartz1
100Q
150Q
250Q
Incandescent1
P38100I
P38150I
Ceramic metal halide
70CM
100CM
150CM
P3870CM
Metal halide
70M
100M
P38100M
150M
P38150M
High pressure sodium
70S
100S
150S
120
208
240
277
347
MVOLT2
SP Spot
FL Flood
CLC Convex lens clear3
CLF Convex lens frosted
34B 3/4" NPT bottom
Grill Options Lamped Finish8
DEL Directional eggcrate louver (square)
FEL Full eggcrate louver (square)
DL Directional louver (round)
CPC Clear polycarbonate (round) 4
Internal accessories
IJB Internal junction box
ASR Aim set ring
IHL Internal honeycomb louver
Fusing
SF Single fuse5
DF Double fuse6
Ballast
GEB Electronic ballast2, 7
LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
9350Intended Use
Uplighting of trees, shrubs,
terraces or walls from a flat
lawn area. The units are
completely weatherproof,
designed for installation in
damp areas.
Construction
Well: Thick wall polypropyl-
ene pipe for higher wattages.
Grill: Cast aluminum or
bronze. Locks to well with
two set screws. Full eggcrate
louver or directional eggcrate
louver square grills and
directional louver or clear
polycarbonate cover round
grills are available. Eggcrate
directional louvers provide
30° cut-off.
Lamp module housing:
Stainless steel, sealed and
purged of all moisture to
100°F (38°C) and mounted
integral with grill. Angular
adjustment up to 15°. Electri-
cal access to lamp module is
done through submersible
rated connector.
Thermally protected. Lamp
included.
Optics
Lens: Tempered glass lens.
Convex lens clear (CLC) is
standard. Convex lens frosted
(CLF) also available.
Electrical
Power module: Sealed
unit encapsulated in an
engineered composite resin
to eliminate all water entry.
High power factor ballast.
Conduit entry/junction
box: Two 3/4" NPT. 25 cubic
inches of volume suitable
for through-branch wiring.
Fixture/J-box connecting
conduit is 1/2" galvanized
pipe with brass cord seal. IJB
(internal junction boxes) also
are available.
Listings
U.L., C.E., CSA, IP67, NEMKO.
Example: 9350 A 100M 120 FL CLC 34B DEL ASR LP TVG
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
20-1/2(52.1)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Incandescent
10(25.4)
10-1/2(26.7)
20(50.8)
HID
11-1/2(29.2)
Clear PolycarbonateCover (CPC)
Full EggcrateLouver (FEL)
Directional EggcrateLouver (DEL)
Directional Louver (DL)
11-1/2(29.2)
11-1/2(29.2)
11-1/2(29.2)
Notes1 Only available in 120V.
2 MVOLT is standard if GEB is selected on metal halide lamps.
3 CLC is the default if lens option is not chosen.
4 100W max. for all lamp types.
5 SF available with 120V, 277V or 347V only.
6 DF available with 208V or 240V only.
7 Electronic ballasts only are available with metal halide lamps.
8 Finish available on aluminum fixture only.
Well Lights
Visit www.hydrel.com for monochromtic LED specifications.
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
659www.hydrel.com | 1-800-750-9773PSG10
IN-G
RA
DE
Series Orientation Material Lamp type LED color
9360DO Drive-overcapacity
UP Flange up
DN Flange down
B Bronze LED10
12LED 12W
Low voltage
M50 MR16, GX5.3
M75 MR16, GX5.3
P3650ILV PAR36, screw terminal
P3675ILV PAR36, screw terminal
Incandescent1
P2050I PAR20, medium
P3050I PAR30, medium
P3075I PAR30, medium
100Q T4, mini-can
Fluorescent8
18TRT Triple tube, GX24q2
26TRT Triple tube, GX24q3
32TRT Triple tube, GX24q3
MH
20CMT4 T4, G8.52
35CMT4 T4, G8.52
35CMT6 T6, G129
70CMT4 T4, G8.52
70CMT6 T6, G129
P2035CM PAR20, medium
P3035CM PAR30, medium
P3070CM PAR30, medium
CLW Cool white
CLWHO Cool white - high output
WMW Warm white
AMB Amber
BLU Blue
CYN Cyan
GRN Green
RED Red
RBL Royal blue
Voltage Distribution Lens Conduit entry Options11 Lamped
123
120
208
220
240
277
347
MVOLT4
NSP Narrow spot11
SP Spot
NFL Narrow flood11
MFL Medium flood
FL Flood11
WFL Wide flood
WWD Wall wash7,11
LSD Linear Spread12
FLC Flat lens clear 34B 3/4" NPT bottom Fusing5
SF Single fuse
DF Double fuse
Ballast
GEB Electronic ballast6
LP Lamp installed
9360DODrive-Over Flush-Mounted Uplight
Intended Use
Hydrel's Model 9360DO, is a
bronze well light, incorporat-
ing some of the internal
components of our M9400
Series. This fixture features
drive-over capacities, capable
of supporting a wide variety
of vehicle types and loads.
The soils engineer or
pavement designer must
properly design this fix-
ture into the supporting
soil, subbase and finish-
ing surface. A properly de-
signed pavement section
could support the fixture
for vertical and lateral
loads up through AASHTO
HS20 (20-ton truck; 16000
Ibs. per wheel load @ 15
miles per hour). The smaller
fixture footprint allows for
placement in tight areas.
Construction
Rough-in section: Cast bronze
frame with stainless steel well.
Lamp module: Stainless
steel, sealed and purged
of all moisture to 100°F.
Electrical access to lamp
module is done through
submersible rated connec-
tor. Thermally protected.
Optics
Lens: Tempered clear flat
borosilicate glass.
Electrical
Power module: Sealed unit
encapsulated in an engi-
neered composite resin to
eliminate all water entry.
LED driver is encapsulated
in a custom-designed heat-
dissipating epoxy resin that
also eliminates all moisture
intrusion. Module is provided
with submersible rated cord
leads for connection to
integral junction box and
lamp module.
Conduit entry: Bottom open-
ings are available in the cast
bronze junction box. Suitable
for through-branch wiring.
Example: 9360DO DN B 70CMT6 120 NSP FLC 34B LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Flange UpFlange Down
16-1441.3)
16-1441.3)
8-3/8(21.3)
11(27.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Incandescent models available with 120V only.
2 Lamps available with GEB electronic MVOLT (120V-277V) ballast only.
3 Available for low-voltage lamps only. Remote 12V power supply required.
4 MVOLT is standard on all fluorescent lamps and metal halide lamps with GEB ballast option.
5 SF only valid with 120V, 277V or 347V. DF only valid with 208V, 220V, or 240V.
6 Only valid with metal halide lamps.
7 WWD only valid with T4 lamps and fluorescent lamps.
8 Only available with WWD, ASY or MFL distributions.
9 Only available with NSP or MFL distributions.
10 Only available with MVOLT.
11 Not available with LED.
12 Only valid with LED.
Well Lights
LED
H
Flange Down Flange Up
H
8-3/8(21.3)
11(27.9)
Low Voltage/ Incandescent Fluorescent HID
Height: 16-1/4 (41.3) 19 (48.3) 22-1/2 (57.2)
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com660
FLO
OD
Series Lamp type Voltage Distribution Mounting Mounting accessories
7000 Incandescent1
100Q T4, MC
Fluorescent2
26TRT GX24Q-3
32TRT GX24Q-3
42TRT GX24Q-3
Metal halide
50M E17, medium
70M E17, medium
Ceramic metal halide
70CM E17, medium
35CMT6 T6, G12
70CMT6 T6, G12
High pressure sodium
35S E17, medium1
50S E17, medium
70S E17, medium
120
208
240
277
347
120/277
MVOLT2
TB
TSP Tight spot3
NHSP Narrow horizontal spot3
MFL Medium fl ood3
FL Flood4
KM Knuckle mount
YM Yoke mount
See page 664.
Options Lamped Finish
Internal accessories8
ISS Internal source shield5
IHL Internal honeycomb louver6, 7
CFAMB Color fi lter amber7
CFRED Color fi lter red7
CFBLU Color fi lter blue7
CFGRN Color fi lter green7
External accessories8
BD Barn doors
GS Glare shield
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
7000Intended Use
The 7000 Series fl oodlight is a
compact, high-performance
outdoor fi xture used for fa-
cade and landscape lighting.
Construction
Material: Die-cast aluminum
housing and door.
Finish: Polyester powder
coated in a range of textured
or semi-matte fi nishes.
Fasteners: Stainless steel.
Weight: 20 lbs.
EPA: 0.64.
Optics
Lens: Flat tempered glass.
Refl ector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various confi gurations de-
signed to provide maximum
performance and uniformity.
Electrical
Lamp: Incandescent – T4,
mini-can to 100W. Fluores-
cent – TRT triple-tube lamps
to 42W. HID – T6, G12 to 70W;
E17 medium-base to 70W.
Note: All lamps must be
rated for "Universal Burning
Position" because fi xture tilt
changes lamp orientation.
Socket – Incandescent
– Mini-can screw base.
Fluorescent – 4-pin, GX24Q
base. HID – G-12, medium, or
E27 base pulse-rated 4KV.
Electrical components: Inte-
grally mounted ballasts rated
for low temperatures.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
Example: 7000 70M 120 FL YM SMSA18 BD LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
6(15.2)
11-3/4(29.8)
5-3/4(14.6)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Knuckle Mount
8-1/4(21.0)
11-3/4(29.8)
13-7/8(35.2)
Yoke MountNotes1 Available in 120V only.
2 MVOLT is the standard voltage for fl uorescent lamps.
3 Available with T6 and T4 lamps only.
4 Available with E17 and TRT lamps only.
5 Available with TSP and MFL distributions only.
6 Available with FL distribution only.
7 Not available with NHSP.
8 Accessories are mutually exclusive. Choose one.
*Mounting not included.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
661www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution Mounting Mounting accessories
7100 Incandescent
250Q T4, MC
300Q T3, RSC
400Q T3, RSC
500Q T3, RSC
Metal halide
70M E17, medium
100M E17, medium
150M E17, medium
Ceramic metal halide
70CM E17, medium
70CMT6 T6, G12
100CM E17, medium
150CM E17, medium
150CMT6 T6, G12
70CMTD T7, RSC
150CMTD T7, RSC
High pressure sodium
50S E17, medium
70S E17, medium
100S E17, medium
150S E17, medium
120
208
220
240
277
347
120/277
TB
NSP Narrow spot1
NHSP Narrow horizontal spot2
SP Spot
HSP Horizontal spot
HFL Horizontal flood2
VFL Vertical flood
WFL Wide flood
KM Knuckle mount
YM Yoke mount
See page 664.
Options Lamped Finish
Internal accessories
ISS Internal source shield3
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External accessories4
BD Barn doors
GS Glare shield5
LC Polycarbonate cover5
Fusing
SF Single fuse6
DF Double fuse7
Re-strike
QRS Quartz emergency re-strike ballast8
QRSTD Quartz emergency re-strike time delay8
Photo control
PE Photo eye
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
7100Intended Use
The 7100 Series floodlight is a
compact, high-performance
outdoor fixture used for fa-
cade and landscape lighting.
Construction
Material: Die-cast aluminum
housing and door.
Finish: Polyester powder
coated in a range of textured
or semi-matte finishes.
Fasteners: Stainless steel.
Weight: 37 lbs.
EPA: 1.27.
Optics
Reflector: High-purity anod-
ized specular, semi-specular,
patterned lighting sheet in
various configurations de-
signed to provide maximum
performance and uniformity.
Lens: Flat tempered glass
standard.
Electrical
Lamp: Incandescent – T3,
RSC quartz to 500W; T4, mini-
can to 250W. HID – T6, G12 to
150W, E17 medium-base to
150W; elliptical, E27 to 150W.
Note: All lamps must be
rated for "Universal Burning
Position" because fixture tilt
changes lamp orientation.
Socket: Incandescent –
Recessed single contact
(RSC), mini-can screw base.
HID – G12, medium or E27
base pulse-rated 4KV.
Electrical components: Inte-
grally mounted ballasts rated
for low starting temp.
Installation
Mounting: Knuckle or yoke
mounted (180° vertical,
360° rotation); fixed
mounted for ceiling or wall.
Knuckle mount – Die-cast
aluminum with 3/4" NPT
galvanized nipple standard.
Yoke mount – Aluminum
with 10' of 18-3 STW flexible
cord polymer. Yoke mount
caps have black finish.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
Example: 7100 150M 120 VFL KM WMSA BD SF LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
15-3/4(40.0)
13-1/4(33.7)
18-1/2(47.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Knuckle Mount
15-3/4(40.0)
6-3/4(17.1)
9-1/4(23.5)
6-3/4(17.1)
16-1/2(41.9)
Yoke Mount
Notes1 Available with 70CMT6, 150CMT6 and 250Q lamps only.
2 Not available with RSC base lamps.
3 Not available with VFL or WFL distributions.
4 Accessories are mutually exclusive. Choose one.
5 Not available with CM mounting.
6 Available with 120V, 277V or 347 HID only.
7 Available with 208V, 220V or 240V HID only.
8 Not available with NSP, WFL and HSP distribution.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com662
FLO
OD
Series Lamp type Voltage Distribution Mounting Mounting accessories Options
7200 Metal halide1
200M2, 11
250M
320M12
350M2, 12
400M
High pressure sodium
250S
400S
120
208
240
277
347
120/277
TB
NHSP Narrow horizontal spot
SP Spot
HSP Horizontal spot
HFL Horizontal flood
VFL Vertical flood
WFL Wide flood
KM Knuckle mount
YM Yoke mount
See page 664. Internal accessories
ISS Internal source shield3
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External accessories4
BD Barn doors
GS Glare shield
LC Polycarbonate cover
EGL Ext. grid louver5
Fusing
SF Single fuse6
DF Double fuse7
Receptacle
PER Photocell receptacle8
Options (continued) Lamped Finish
Ballast
SCWA Super CWA pulse start10
Re-strike
QRS Quartz emergency re-strike ballast9
LPI Lamp included
LPIH Lamp included (horizontal burn)12
LPIV Lamp included (vertical burn)11, 12
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
7200400W max.
Intended Use
The 7200 Series floodlight is a
high-performance fixture used
for facade and area lighting.
Construction
Material: Die-cast aluminum
housing and door.
Finish: Polyester powder
coated in a range of textured
semi-matte finishes.
Fasteners: Stainless steel.
Weight: 50 lbs.
EPA: 3.00.
Optics
Reflectors: High-purity anod-
ized specular, semi-specular,
or patterned lighting sheet
in various configurations
designed to provide optimum
optical performance. Reflec-
tors are interchangeable using
four screws and quick-release
electrical connectors (with the
exception of spot reflectors).
Reflectors include both
segmented and hydroformed
types to provide maximum
performance and uniformity.
Lens: Flat tempered glass.
Electrical
Lamp: HID to 400W.
Socket: Porcelain mogul base
rated 5KV.
Electrical components: Inte-
grally mounted ballasts rated
for low temperatures.
Installation
Mounting: Knuckle or yoke
mounted (180° vertical, 360°
rotation) on pole, stanchion,
wall or tenons.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
Example: 7200 400M 277 WFL KM EWM24 SCWA LPI BZ
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
23-3/8(59.4)
21-5/8(54.3)
14-1/2(36.7)
10-3/8(26.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Knuckle Mount
23-3/8(59.4)
27-1/2(69.9)
14-1/2(36.7)
10-3/8(26.4)
17-5/8(44.8)
Yoke Mount
Notes1 Available only with SCWA ballast.
2 200M and 350M are not available with SP distribution.
3 Not available with WFL distribution.
4 Accessories are mutually exclusive. Choose one.
5 EGL accessory available in matte black finish only.
6 Available with 120V, 277V or 347V HID only.
7 Available with 208V, 240V or 480V HID only.
8 NEMA twist-lock receptacle only; photocontrol by others.
9 Not available with TB, NHSP, SP, WFL or HSP.
10 Required on 200M, 250M, 320M, 350M or 400M.
11 LPIV required on 200M.
12 LPIH or LPIV required on 320M or 350M.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
663www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution Mounting Mounting accessories1 Options
7200 750M12
1000M
1000S
120
208
240
277
347
120/277
TB
NHSP Narrow horizontal spot
SP Spot
HSP Horizontal spot
HFL Horizontal flood
VFL Vertical flood
WFL Wide flood
KM Knuckle mount
YM Yoke mount
SMB Surface mounted ballast
SMBEWM SMB extended wall mount
SMBPMT Pole mount tee2
SMBSMSA SMB stanchion mount
SMBSMT SMB stanchion mount tee2
SMBTNM SMB tenon mount3
SMBR SMB remote mount
Internal accessories
ISS Internal source shield4
External accessories5
BD Barn doors
GS Glare shield
EGL Ext. grid louver6
Options (continued) Lamped Finish
Fusing
SF Single fuse7
DF Double fuse8
Photocontrol
PER Photocell receptacle9
Ballast
SCWA Super CWA pulse-start11
Re-strike
QRS Quartz emergency re-strike ballast10
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
72001000W max.
Intended Use
The 7200 Series flood is
designed for use in facade
and area lighting.
Construction
Material: Die-cast aluminum
housing and door.
Finish: Polyester powder
coated in a range of textured
or semi-matte finishes.
Fasteners: Stainless steel.
Weight: 40 lbs. Head only;
does not included ballast.
EPA: 3.00.
Optics
Reflectors: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various configurations to
provide optimum optical
performance. Reflectors are
interchangeable using four
screws and quick-release
electrical connectors (with
the exception of spot reflec-
tors). Reflectors include both
segmented and hydroformed
types to provide maximum
performance and uniformity.
Lens: Flat tempered glass.
Electrical
Lamp: HID to 1000W.
Socket: Porcelain mogul base
rated 5KV.
Electrical components: Exter-
nally mounted ballasts rated
for low starting temp. Ballast
box must be specified.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
Example: 7200 1000M 120 VFL KM SMB GS LPI BZ
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
23-3/8(59.4)
21-5/8(54.3)
14-1/2(36.7)
10-3/8(26.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Knuckle Mount
23-3/8(59.4)
27-1/2(69.9)
14-1/2(36.7)
10-3/8(26.4)
17-5/8(44.8)
Yoke Mount
Notes1 If not selected, fixture will ship less ballast.
2 Two fixtures per mount.
3 For use with KM only.
4 Not available with WFL distribution.
5 Accessories are mutually exclusive. Choose one.
6 EGL available in matte black finish only.
7 Available with 120V, 277V or 347V only.
8 Available with 208V or 240V only.
9 NEMA twist-lock receptacle only; photocontrol by others.
10 Not available with 480V or TB, NHSP, SP, WFL or HSP distribution.
11 SCWA required in 750M, optional om 1000M.
12 750M not available with SP or HFL distribution.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com664
FLO
OD
Accessories
7200
22-7/8(58.1)
22-7/8(58.1)
22-7/8(58.1)
14(35.6)
14(35.6)
11-3/8(28.9)
10(25.4)
4(10.2)
5-3/8(13.7)
5-3/8(13.7)
16-3/4(42.5)
2-5/8(6.7)
LCLexan Covers
BDBarn Door
EGEternal Grid Louver
GSGlare Shield
MOUNTING ACCESSORIES3
SERIES TYPE MOUNT NOM. N/A
ARJB
FJB
PMSA
PMT
SMSA
HYDS
MDB
TRJB
EWM
TNM
PAR
PAS
PATR
PATS
SMB
SMBE
WM
SMBS
MSA
SMBS
MT
SMBP
MT
SMBT
NM
SMBR
7000 Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2
7000 Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2
7100 Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2
7100 Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2
7100 FixedWall Side/ Down/Up
WMS/WUS
7100 Fixed Ceiling CM
7200 400W Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2
7200 400W Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2
7200 1000W Adjustable Knuckle KM 1 1
7200 1000W Adjustable Yoke YM 1 1
7000
6(15.2)
11-3/4(29.8)
2-3/8(6.0)
2-3/8(6.0)
BD
Barn Doors
6(15.2)
11-3/4(29.8)
GS
Glare Shield
7100
BD Barn Doors
GS Glare Shield
LC Polycarbonate Cover
4(10.2)
4(10.2)
1-3/4(4.5)
15-3/4(40.0)
15-3/4(40.0)
15-3/4(40.0)
9-3/4(24.8)
9-3/4(24.8)
9-3/4(24.8)
7000 SERIESAccessories
ARJB Architectural junction boxFJB Flush mount juction boxPMSA Pole mountPMT Pole mount tee
SMSA Stanchion mountHYDSMDB Stanchion mount direct burialTRJB Tree mount junction boxEWM Extended wall mount
TNM Tenon mountPAR Pole arm roundPAS Pole arm squarePATR Pole arm twin round
PATS Pole arm twin squareSMB Surface mounted ballastSMBEWM SMB extended wall mountSMBSMSA SMB stanchion mount
SMBSMT SMB stanchion tee mountSMBPMT SMB pole mount teeSMBTNM SMB tenon mountSMBR SMB remote mount
Notes1 Two fixtures per mounting.
2 Multiple lengths available, consult specification sheets.
3 For more mounting information, see pages 669 and 676-677.
PRODUCT INFORMATION
HYD
REL
665www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution MountingMounting accessories
8100 Incandescent
100Q T4, mini can
150Q T4, mini can
250Q T4, mini can
Fluorescent1
42TRT G24Q-3
2/42TRT G24Q-3
Metal halide
50M ED17, medium
70M ED17, medium
100M ED17, medium
150M ED17, medium
Ceramic metal halide
70CMT6 T6, G12
150CMT6 T6, G12
High pressure sodium
50S ED17, medium
100S ED17, medium
150S ED17, medium
120
208
240
277
347
120/277
TB
MVOLT2
Floodlights3
NSP Narrow spot4
SP Spot
NFL Narrow flood
MFL Medium flood
FL Flood
WFL Wide flood
VWFL Vertical wide flood5
Area lights
SR2 IES type II
SR3 IES type III
SR4SC IES type IV
SR5S IES type V
AWM Adj. wall mount
AWMDE Adj. wall mount, direct entry
YM Yoke mount
PMEF Pole mount flat, square pole
PME3 Pole mount 3" diameter, round pole
PME4 Pole mount 4" diameter, round pole
See page 668.
Options Lamped Finish
Internal accessories
ISS Internal source shield6
LSF Linear spread filter
VSF Vertical spread filter
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External accessories7
BD Barn doors
FGS Full glare shield
HGS Half glare shield
HS House side shield8
WRG Wire rock guard
Photocontrol
PER Photocell9
Fusing
SF Single fuse10
DF Double fuse11
Ballasts
GEB Electronic ballast12
MLEBAD Electronic analog dimming12, 13
EL N Battery backup (for (2) 42TRT only)5
EL NICE Battery backup for operation in low temperature conditions (for (2) 42TRT only)5
LPI Lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
8100Intended Use
The 8100 Series is a high-
performance compact
precision lighting system
that provides consistent
styling with a variety of light
distributions. Multiple opti-
cal systems provide a wide
range of precise light control.
For use in facade, area and
pathway lighting.
Construction
Material: Die-cast, copper-
free aluminum (A360) hous-
ing and doors.
Finish: Textured TGIC powder
coat polyester finish.
Weight: 26.5 lbs. max.
EPA: 1.41.
Optics
Reflector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various configurations to
provide optimum optical
performance and uniformity.
Lens: Flat tempered glass
for maximum resistance to
impact and thermal shock.
Electrical
Lamp: ED17 medium-base to
150W, T6, G12 base to 150W;
quartz T4 mini-can base
to 250W.
Ballast: High power factor mag-
netic core and coil standard.
Electronic ballast optional.
Installation
Mounting: AWM – cast
aluminum wall mount plate
for mounting over 4-0/4-S
recessed J-box. AWMDE –
surface conduit direct entry
available for through-branch
wiring; 3/4" NPT drilling stan-
dard. PM – steel mounting
plates for attachment to pole
using a unique block/receiver
assembly. The block bolts
to a pole and engages the
receiver within the 8100 in-
tegral arm. A single threaded
locking fastener secures the
fixture to pole. YM – 1-1/2"
wide aluminum yoke, 15° up/
down adjustment and stain-
less steel locking hardware
allows fixture head to easily
be aimed and fixed in place.
Fixtures are provided with a
minimum of 10' of 18/3 STW
cord for power supply.
Listings
U.L., C.U.L., IP67.
Example: 8100 150M MVOLT NFL YM SMSA18 BD GEB LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
D.E. (direct entry)
8-1/8(20.6)
14-3/4(37.5)
10(25.4)
5-1/8(13.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Adjustable Wall Mount
10(25.4)
8-1/8(20.6)
14-1/8(35.7)
5-1/8(13.0)
Yoke Mount
5-1/8(13.0)
12-1/4(31.1)
17-1/4(43.8)
10(25.4)
Pole Mount
Floodlighting
Notes1 Available with flood (FL) distribution.
2 MVOLT is standard on all fluorescent lamps (unless ELN is selected) and metal halide lamps with GEB or MLEBAD option.
3 Floodlight distributions are not available with PMEF, PME3 or PME4.
4 Available for G12 and mini-can bases only. NSP = spot distribution with ISS.
5 Only available with 2/42TRT.
6 Not available with SR2, SR3, SR5; standard on NSP and SR4SC.
7 Accessories are mutually exclusive. Choose one.
8 HS only available with SR2 and SR3 distributions and not available with yoke mount.
9 PE not available with yoke mount.
10 SF is available with 120V, 277V or 347V on HID only.
11 DF is available with 208V, 220V or 240V on HID only.
12 Electronic ballasts only are available with metal halide lamps (150W max.) and MVOLT voltage.
13 0-10V dimmer not included.
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com666
FLO
OD
Series EmergencyLamp type Voltage Distribution Mounting
Mounting accessories Options Lamped Finish
8100 EO Fluorescent
2/42TRT
120
277
FL Flood AWM Adj. wall mount
AWMDE Adj. wall mount, direct entry
YM Yoke mount
PME3 Pole mount 3" diameter, round pole
PME4 Pole mount 4" diameter, round pole
See page 668.
ICE For low-ambient conditions
RTSW Remote test switch
LPI Lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
8100Emergency Only
Intended Use
The 8100 EO Series is a
high-performance emergency
compact fluorescent lighting
system. Recommended ap-
plications are areas along the
path of egress, educational,
athletic fields, health care and
commercial facilities needing
standby of emergency illumi-
nation. For use in facade, area
and pathway lighting.
Construction
Material: Die-cast, copper-
free aluminum (A360) hous-
ing and doors.
Finish: Textured TGIC powder
coat polyester finish.
Weight: 25 lbs.
EPA: 1.5.
Electrical
Lamp: Two 42W Gx24q-4 base
compact fluorescent lamps.
Illumination time: 90
minutes.
Total lumen output: 6400
lumens.
Test switch: Single pole.
Recharge time: 24 hours.
Operation: When the normal
supply of AC power fails, the
8100 EO instantly switches to
the emergency mode, keep-
ing two compact fluorescent
lamps illuminated for a
minimum of 90 minutes at
full output. When AC power
is restored the emergency
system returns to the normal
mode. Ambient temperature
-20°C to 55°C with ICE option.
Charging indicator light: LED.
Input voltage: 120V or 277V,
60Hz.
Installation
Mounting: YM – 1-1/2" wide
aluminum yoke and stainless
steel locking hardware
allows fixture head to easily
be aimed and fixed in place.
Fixtures are provided with a
minimum of 10' of 18/3 STW
cord for power supply. AWM
– Cast aluminum wall mount
plate for mounting over
4-0/4-S recessed junction
box. 15° up/down adjust-
ment. AWMDE – Surface
conduit direct entry available
for through-branch wiring;
3/4" NPT drilling standard.
PM – Steel mounting plates
for attachment to pole using
a unique block/receiver
assembly. The block bolts to a
pole and engages the receiver
within the 8100 integral arm.
A single threaded locking
fastener secures the fixture
to pole.
Listings
U.L., C.U.L., IP67.
Example: 8100 EO 2/42TRT 120 FL YM LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
D.E. (direct entry)
14-3/4(37.5)
10(25.4)
5-1/8(13.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Adjustable Wall Mount
10(25.4)
14-1/8(35.7)
5-1/8(13.0)
Yoke Mount
5-1/8(13.0)
12-1/4(31.1)
17-1/4(43.8)
10(25.4)
Pole Mount
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
667www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution Mounting Mounting accessories Options
8200 Metal halide1
200M
250M
320M
350M
400M
High pressure sodium11
250S
400S
120
208
240
277
347
120/277
TB
MVOLT2
Floodlights3
SP Spot
NFL Narrow flood
MFL Medium flood
FL Flood
WFL Wide flood
HSP Horizontal spot
VFL Vertical flood
HFL Horzontal flood
Area lights
SR2 IES type II
SR3 IES type III
SR4SC IES type IV
SR5S IES type V
AWM Adj. wall mount
AWMDE Adj. wall mount, direct entry
YM Yoke mount
PMEF Pole mount flat, square pole
PME3 Pole mount 3" diameter, round pole
PME4 Pole mount 4" diameter, round pole
See page 668. Internal accessories5
ISS Internal source shield4
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External accessories5
BD Barn doors
Options (continued) Lamped Finish
External accessories5 (continued)
FGS Full glare shield
HGS Half glare shield
HS House side shield6
WRG Wire rock guard
Photocontrol
PER Photocell receptacle12
Fusing
SF Single fuse7
DF Double fuse8
Ballasts
GEB Electronic ballast9
SCWA Super CWA pulse start10
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
8200Intended Use
The 8200 Series is a high-
performance precision
lighting system that provides
consistent styling with a
variety of light distributions.
Multiple optical systems pro-
vide a wide range of precise
light control. For use in facade,
area and pathway lighting.
Construction
Material: Die-cast, copper-
free aluminum (A360) hous-
ing and doors.
Finish: Textured TGIC powder
coat polyester finish (see order-
ing guide for available colors).
Weight: 29.5 max.
EPA: 1.45.
Optics
Reflector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various configurations to
provide optimum optical
performance and uniformity.
Lens: Flat tempered glass
for maximum resistance to
impact and thermal shock.
Electrical
Lamp: ED18, ED28 or T15 HID
to 400W maximum. Mogul or
E40 sockets.
Ballast: High power factor mag-
netic core and coil standard.
Electronic ballast optional.
Installation
Mounting: AWM – Cast
aluminum wall mount plate
for mounting over 4-0/4-S re-
cessed junction box. 15° up/
down adjustment. AWMDE:
Surface conduit direct entry
available for through-branch
wiring; 3/4" NPT drilling stan-
dard. PM – Steel mounting
plates for attachment to pole
using a unique block/receiver
assembly. The block bolts to a
pole and engages the receiver
within the 8200 integral arm.
A single threaded locking
fastener secures the fixture
to the pole. YM – 1-1/2" wide
aluminum yoke and stainless
steel locking hardware allows
fixture head to be easily
aimed and fixed in place.
Fixtures are provided with a
minimum of 10' of 18/3 STW
cord for power supply.
Listings
U.L., C.U.L., IP67.
Example: 8200 250M 120 SR2 AWM HS LPI SND
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
7-3/8(18.7)
20-3/4(52.7)
15-1/2(39.4)
D.E. (direct entry)
13-1/2(34.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Adjustable Wall Mount
15(39.4)
13-1/2(34.3)
20-1/8(51.1)
7-3/8(18.7)
Yoke Mount
7-3/8(18.7)
17-3/4(45.1)
22-3/4(57.8)
15-1/2(39.4)
Pole Mount
Notes1 SCWA standard.
2 MVOLT is the default if GEB is selected; only valid on metal halide lamps.
3 Flood light distributions not available with PMEF, PME3 and PME4 mountings.
4 ISS comes standard on the VFL and SR4SC distributions. ISS is not available with FL, HFL, WFL, SR2, SR3 and SR5S distributions.
5 Accessories are mutually exclusive. Choose one.
6 HS available with SR2 and SR3 distributions only.
7 SF is available with 120V, 277V or 347V on HID only.
8 DF is available with 208V, 220V or 240V on HID only.
9 Electronic ballasts are only available with metal halide lamps 250-400W, 208-277V only.
10 SCWA ballasts are required with metal halide lamps.
11 Not valid with SR2, SR3, SR4SC or SR5S.
12 NEMA twist-lock receptacle only; photocontrol by others.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com668
FLO
OD
Notes1 Two fixtures per mounting.
2 Multiple lengths available; consult specification sheets.
3 For more mounting information, see pages 669 and 676-677.
MOUNTING ACCESSORIES3
SERIES TYPE MOUNT NOMENCLATURE N/A ARJB FJB PMSA PMT HYDSMDB TRJB EWM PAR PAS PATR PATS SMSA_
8100 Adjustable Yoke YM 1 2 2 2 1, 2 1, 2 1, 2
8100 Adjustable Wall AWM/AWMDE
8100 Fixed Pole PMEF/PME3/PME4
8200 Adjustable Yoke YM 1 2 2 2 1, 2 1, 2 1, 2
8200 Adjustable Wall AWM/AWMDE
8200 Fixed Pole PMEF/PME3/PME4
Accessories
BD Barn doors
Four door set; each door mounts independently.
HS House side shield cuts nuisance glare.
FGS Full glare shield 360° full cutoff.
ISS Internal source shield eliminates lamp source glare.
HGS Half glare shield cuts upward glare.
WRG Wire guard for additional safety protection.
8100 & 8200 SERIESAccessories
ARJB Architectural junction boxFJB Flush mount juction boxPMSA Pole mountPMT Pole mount tee
HYDSMDB Stanchion mount direct burialTRJB Tree mount junction boxEWM Extended wall mountPAR Pole arm round
PAS Pole arm squarePATR Pole arm twin roundPATS Pole arm twin squareSMSA_ Standard mounting splice access available in 12"- 48" in 6" increments
PRODUCT INFORMATION
HYD
REL
669www.hydrel.com | 1-800-750-9773PSG10
MO
UN
TING
ACCESSOR
IESSMB Mounting
6-1/2(16.5)
6-1/2(16.5)
19(48.3)
Knuckle Yoke
8-1/4(30.0)
8-1/4(30.0)
Knuckle Yoke
6-1/2(16.5)
6-1/2(16.5)
10-1/2(26.7)
9-1/2(24.1)
9-1/2(24.1)
18-1/4(46.4)
27-1/2(69.9)
18-1/4(46.4)
6-1/2(16.5)
6-1/2(16.5)
19(48.3)
19(48.3)Yoke
Knuckle
8-1/4(30.0)
8-1/4(30.0)
Yoke
Knuckle
9-1/2(24.1)
9-1/2(24.1)
9-1/2(24.1)
9-1/2(24.1)
31-1/4(79.4)
31-1/4(79.4)
Yoke
6-1/2(16.5)
6(15.2)
22 (55.9)
38(96.5)
6(15.2)
6-1/2(16.5)
22 (55.9)
Knuckle
8-1/4(30.0)
38(96.5)
Yoke
Knuckle
6-1/2(16.5)
38(96.5)
38(96.5)
8-1/4(30.0)
8-1/4(30.0)
6-1/2(16.5)
19(48.3)
8-1/4(30.0)
SMBTNM Tenon Mount
SMB SMB Ballast
SMBSMT Stanchion Tee Mount
SMBSMSA Stanchion Mount SMBPMT Pole Tee Mount
SMBR Remote Mount (Can be used for a wide variety of mounting placements.)
SMBEWM Extended Wall Mount
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com670
MO
UN
TIN
G A
CCES
SOR
IES Accessories
Type Height Nominal shaft base size/Wall thickness
HYDSSAG2 Square, straight, aluminum, G2
HYDSSA Square, straight, aluminum
HYDSSS Square, straight, steel
HYDRSA Round, straight, aluminum
HYDRSS Round, straight, steel
Specify height, see Configurations table below. Nominal shaft base size Wall thickness
3.75 B .120
4 C .125
4.5 E .156
5 G .188
6 J .250
Fixture mounting methods1 Options Finish
Mounting
PT Open top
Tenon mounting
T20 2-3/8” O.D.
T25 2-7/8” O.D.
G2XTEND drill mounting
DM19G2 Single luminaire drilling
DM28G2 Two luminaires at 180°
DM29G2 Two luminaires at 90°
DM39G2 Three luminaires at 90°
DM49G2 Four luminaires at 90°
8100/8200 PM drill mounting
DM19AS Single luminaire drilling
DM28AS Two luminaires at 180°
DM29AS Two luminaires at 90°
DM39AS Three luminaires at 90°
DM49AS Four luminaires at 90°
PER NEMA twist-lock receptacle only located at pole top2
L/AB Less anchor bolts
VD Vibration damper
TP Tamper-proof screws provided with base cover
H __ Horizontal arm3, 4
FDL _ Festoon duplex outlet less electrical3
FGL _ Festoon GFI outlet less electrical3
HH __ Extra handhole3, 5
Standard colors
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
Designer colors
DBLB Designer black, textured
DSPD Dark gray, textured
DNAT Natural aluminum, textured
DWHG Designer white, textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom
Example: HYDDSSAG2 16 3.75J T20 DDB
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Poles: For detailed technical information, EPAs and wind map, please visit www.hydrel.com.
NOTES:
1 When ordering tenon mounting and drill mounting for the same pole,
follow this example: DM28G2/T20. The combination requires an extra handhole.
2 NEMA twist-lock photocontrol by others. Not available with tenon mounting.
3 Must specify location and orientation when ordering an option.
For first space _ : Specify the height in feet above base of pole. Example: 5' = 5 and 20'= 20
For second space _ : Specify orientation from handhole (A,B,C,D).
Refer to the handhole orientation diagram on this page.
4 Horizontal arm is 18” x 2-3/8” O.D. tenon standard.
5 Combination of tenon-top and drill mount requires extra handhole.
18"
HYDRSA
Nut cover disc
18"
B
18"
HYDSSA HYDSSS
HYDRSS
CONFIGURATIONSPOLE HEIGHT (FT) NOMINAL SHAFT BASE SIZE WALL THICKNESS
HYDSSAG2 10 - 16 3.75 JHYDSSA 8 - 35 4, 5, 6 C, G, J
HYDSSS 10 -39 4, 5, 6 C, GHYDRSA 8 - 30 4, 4.5, 5, 6 C, E, GHYDRSS 8 - 35 4, 4.5, 5 B
ORDERING INFORMATION
CAUTION: This pole selection process is a guideline only. Hydrel® and Acuity Brands® assume no responsibility for selec-tion, and we recommend consultation with qualified individuals for verification of luminaire/pole assembly selection.
POLES
PRODUCT INFORMATION
HYD
REL
671www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution Mounting Mounting accessories Options
2100 Incandescent1
100Q
150Q
250Q
Ceramic metal halide2
35CMT6
70CMT6
150CMT6
120
208
240
277
347
120/277
MVOLT3
TB
RN Rectangular narrow
RM Rectangular medium
RW Rectangular wide
YM Yoke mount See page 675. External accessories4
FGS Full glare shield
GS Half glare shield
VSR Visor
Fusing
SF Single fuse5
DF Double fuse6
Ballasts7
GEB Electronic ballast
MLEBAD Electronic dimming ballast8
Cord set length Lamped Finish
CSL_ 10'-50' of cord (available in 5' increments) LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
2100Intended Use
The 2100 Series is a compact,
high-performance lighting
fixture available with
incandescent or HID lamp
types. Several ideal distribu-
tions are offered for a wide
variety of applications. The
2100 Series yoke-mounted
unit also includes multiple
mounting accessories.
Construction
Material: Rugged heavy wall
cast aluminum body and
hinged door. All fasteners are
stainless steel.
Lens: High-strength curved,
tempered glass.
Finish: Textured TGIC powder
coat polyester finish (see order-
ing guide for available colors.
Electrical
Lamp: Incandescent – T4
mini-can to 250W max.
Metal halide – T6, G12 to
150W max.
Socket: Mini-can, screw shell
or G12 base, bi-pin.
Installation
Mounting: Yoke mount with
a minimum of 10' 18/3 STW
cord. Cord length must be
specified.
Listings
U.L., C.U.L., suitable for wet
locations.
Example: 2100 70CMT6 120 RN YM RACB GS SF CSL10 LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
7-3/4(19.7)
5-3/4(14.6)
5-1/2(14.08-3/4
(22.2)
4(10.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Available in 120V only.
2 Requires HID ballast enclosure.
3 MVOLT is standard on all metal halide lamps with GEB ballast option.
4 Accessories are mutually exclusive. Choose one.
5 SF is available with 120V, 277V or 347V on HID only.
6 DF is available with 208V or 240V on HID only.
7 Only available with 35CMT6 and 70CMT6 with MVOLT voltage.
8 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required.
Floodlighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com672
FLO
OD
Series Lamp type Voltage Distribution Mounting Mounting accessories Options
4740 Fluorescent
26TRT GX24Q-3
32TRT GX24Q-3
MVOLT WFL Wide flood YM Yoke mount ARJB Arch. J-box
WMP Wall-mount plate
WMSA Wall-mount with splice access
EWM_ Extended wall mount 1
PSSA Pedestal stanchion-mount
PMSA Pole-mount with splice access
SMSA_ 12" - 48" stanchion-mount; available in 6" increments 1
FJB Flush junction box
PSS_ 18", 24" or 36" polymer sealed ground spike 1
External accessories
FVSR Full visor
HVSR Half visor
TPH Tamper-proof hardware
Cord set length Lamped Finish
CSL_ 10' - 50' of cord, available in 5' increments LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
4740Compact Fluorescent
Intended Use
Hydrel's 4740 compact
fluorescent lighting fixture
brings fluorescent lamp per-
formance to smaller outdoor
applications. These are ideal
for soft, even illumination
within smaller planters, and
along walls and signs.
Construction
Material: Extruded aluminum
with die-cast aluminum
end caps.
Cord: Supplied with a mini-
mum of 10' of 18-3 cable. Cord
length must be specified.
Fasteners: Stainless steel.
Optics
Distribution: WFL – wide
flood.
Lens: Polycarbonate.
Electrical
Lamp: One (1) compact
fluorescent, 32W Max. For 42W
please consult factory.
Socket: GX24Q 4-pin.
Ballast: Electronic multi-volt,
0°F (-18°C) minimum starting
temperature.
Installation
YM: Yoke mount.
Listings
U.L., CUL.
Note: Hydrel reserves the
right to modify specifica-
tions without notice. Any
dimension on this sheet is to
be assumed as a reference
dimension: "Used for infor-
mation purposes only. It does
not govern manufacturing
or inspection requirements."
(ANSI Y14.5-1973.)
Example: 4740 32TRT MVOLT WFL YM ARJB FVSR CSL30 LPI DDB
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
12(30.5)
10-1/4(26.0)
4(10.2)
4-1/2(11.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Linear Floodlighting
Notes1 Multiple lengths available, consult specification sheets .
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
673www.hydrel.com | 1-800-750-9773PSG10
FLOO
D
Series Lamp type Voltage Distribution MountingMounting accessories
4752
4753
4754
4756
4758
4752
14T5 14W T5
2/14T5 Two 14W T51
24T5HO 24W T5HO
2/24T5HO Two 24W T5HO1
4753
21T5 21W T5
2/21T5 Two 21W T51
39T5HO 39W T5HO
2/39T5HO Two 39W T5HO1
4754
28T5 28W T5
2/28T5 Two 28W T51
54T5HO 54W T5HO
2/54T5HO Two 54W T5HO1
4756
2/21T5 Two 21W T5
4/21T5 Four 21W T51
2/39T5HO Two 39W T5HO
4/39T5HO Four 39W T5HO1
4758
2/28T5 Two 28W T5
4/28T5 Four 28W T51
2/54T5HO Two 54W T5HO
4/54T5HO Four 54W T5HO1
MVOLT2
347
WWD Wall wash
VFL Vertical fl ood
NFL Narrow fl ood
MFL Medium fl ood
WFL Wide fl ood3
KM Knuckle mount
AWM Adjustable wall mount7
See page 675.
Runs Options Cord set length6 Lamped Finish
ETE End to end10
For runs or end-to-end mounting, see specifi cation sheet on www.hydrel.com
External accessories4
FSS Flush source shield
FVSR Full visor
HVSR Half visor
TPH Tamper-proof hardware
Electrical
PLPKX Polarpack® cold weather option (120V)4
PLPKY Polarpack® cold weather option (347V)4
PLPKZ Polarpack® cold weather option (208-277V)4
CW20 Cold weather ballast, -20°F (-29°C) starting temperature 5
ELN Emergency battery backup, half output8
CSL_ 10' - 50' of cord, available in 5' increments
LPI 3000°K lamp included
LP35K 3500°K lamp included
LP41K 4100°K lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GR Gray
STG Steel gray
WH White
GN Green
SND Sand
TVG Terra verde green
CF Custom
4750Intended Use
T5 and T5HO lamp perfor-
mance, high-output sym-
metrical and asymmetrical
distributions and simple
design, make the Hydrel 4750
Series ideal for spreading
soft, even illumination along
walls, signs and planters.
Construction
Material: Extruded A360
aluminum with die-cast
aluminum end caps. All
fasteners are stainless steel.
Optics
Distribution: Wall wash,
narrow fl ood, medium fl ood,
vertical fl ood and wide fl ood.
Lens: Curved high-strength,
optical-grade clear acrylic.
External glare control
available.
Electrical
Lamp: Fluorescent, single or
multiple T5 and T5HO to 54W
per lamp.
Socket: G5 miniature bi-pin.
Voltage: Multi-volt (120V-277V
50/60 Hz) or 347V available.
Ballast: Electronic multi-volt,
-20°F (-29°C) minimum start-
ing temperature with CW20
ballast option.
Polarpack® cold weather
options available. Polarpack®
option will consume up to
19W when operating.
Installation
Mounting: KM – Knuckle
mounted with two 1/2" NPT
side mounting arms. AWM –
Adjustable wall mount with
two side mounting brackets
and minimum of 10' 18/3
STW (US) or 3M 3GX1.0 mm
HO7RN-F (IEC) fl exible cord.
Cord length must be specifi ed.
Listings
U.L., C.U.L.
Example: 4754 54T5HO MVOLT MFL KM WMP FSS LPI DNAT
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
L
4 -1/2(11.4)
4(10.2)
2-3/8 (6.0)
3 (7.6)
4752 4753 4754 4756 4758 L: 28 (71.1) 40 (101.6) 51 (129.5) 74-1/2 (189.2) 97-1/2 (247.7)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Available with WFL distribution only.
2 MVOLT multi-volt ballast range: 120V-277V, 50/60Hz.
3 WFL distribution only available with multiple lamp options as specifi ed with note 1.
4 Accessories are mutually exclusive. Choose one.
5 Only available with WWD and WFL distributions using 54T5HO lamps.
6 Required for AWM mounting only. Specify cord length in feet. Not available with KM.
7 No mounting accessories with AWM.
8 Only available with 4754, 4758 using WWD or WFL distribution; 4756 using WWD distribution.
9 Not available with ELN or MVOLT.
10 ETE only available with KM.
Linear Floodlighting
AWM
KM
KM AWM
L
4(10.2)
1-1/2(3.8)
4752 4753 4754 4758 L: 28-7/8 (73.3) 40-7/8 (103.2) 51-7/8 (131.8) 98-3/8 (249.9)
4-1/2
4-3/4(11.6)
(11.4)
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com674
FLO
OD
Series Lamp type Voltage
4798
4799
4798
60I T-10, medium1
13DTT Double twin tube, 4-pin
2/13DTT Two double twin tube, 4-pin
18TRT Triple tube, 4-pin
26TRT Triple tube, 4-pin
32TRT Triple tube, 4-pin
42TRT Triple tube, 4-pin
35S E17, medium1
50M E17, medium
4799
54T5HO T5HO, miniature bi-pin
2/54T5HO Two T5HO, miniature bi-pin
32 T8, medium bi-pin
44T8HO T8HO, recessed double contact3
120
208
220
240
277
347
MVOLT2, 3
Mounting accessories Options Lamped Finish
See page 675. External accessories
HGS Half glare shield
LPI Lamp included BZ Bronze
BL Black
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
4798 4799Accent Light
Intended Use
The 4798 accent lighting
fixture offers simple and
compact illumination. Ideal
for spreading soft, even light
along planters, walls and
signs. These units are available
in incandescent, fluorescent
and HID to 50W max.
The Hydrel 4799 fluorescent
lighting fixture offers high-
output with simple lines
and a long, low silhouette.
These are ideal for spreading
soft, even illumination along
planters, walls, and signs that
require a low pattern of light.
Front re-lamping via four
stainless steel fasteners.
Construction
Material: Extruded aluminum
with die-cast aluminum end
caps. Knuckles are cast bronze.
Fasteners: Stainless steel.
Optics
Distribution: Flood – Flat
polished stainless steel
reflector.
Lens: (4798): Tempered
Borosilicate Glass. (4799):
Clear acrylic.
Electrical
4798: Incandescent – T10,
60W max; Fluorescent – 42TRT
max; HID – E17, 50W max.
4799: T8, 44W max, per lamp.
Ballast: Integral mounted
ballast for low temperature
operation.
Installation
Mounting: 4798: Single 1/2"
NPT adjustable cast bronze
knuckle. 4799: Two (2)1/2"
NPT adjustable knuckles.
Listings
U.L., CSA
Example: 4798 32TRT MVOLT HGS LPI BZ
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5(12.8)
4-1/4(10.8)
49-3/4(126.4)
39-1/4(99.7)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
4799
5(12.8)
4-1/4(10.8)
12-1/2(31.8)
4798 HID
5(12.8)
4-1/4(10.8)
10-1/2(26.7)
4798 Standard
Notes1 60I and 35S are only available in 120V.
2 MVOLT (120V-277V) only available with fluorescent lamps.
3 MVOLT is not available with 44T8HO.
Linear Floodighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
675www.hydrel.com | 1-800-750-9773PSG10
MO
UN
TING
ACCESSOR
IES
Notes1 Two of the selected mounting boxes will be provided.
2 PS available in 12V only.
3 Knuckle mount fixtures only.
4 Specify up to four junction boxes per strap.
5 Will accept two fixtures per mounting. To order with the fixture put 2/ in the lamp type category; for example: 4511 2/M35 12 SP WBC 4O DNA. Visit www.hydrel.com for detailed information on any of the mounting options.
6 For 120V portable applications only.
7 Multiple lengths available consult specification sheets.
= option available
Reminder: Transformer or HID ballast not included (excluding 4620 M50, 4750).
Please remember to order a ballast or transformer box.
FLOOD AND LANDSCAPE LIGHTING MOUNTING ACCESSORIES
NOMENCLATURE DESCRIPTION 2100 47501 4798 4799 4511 4516 4519 4521 4524 4525 4529 4610 4620 4630 4640 4650 4709
NO
BALLAST
ARJB Architectural junction box
FJB Flush mounted junction box
JBA/JBB Junction box aluminum/bronze
MS/MSB Mounting spike steel/bronze (12” or 18” – 12V only)
PS/PSS Polymer ground spike open/sealed (18”, 24” 36”)2
PSSA Pedestal stanchion mount
SBA/SBB Stake box aluminum/bronze (12” or 18”)3 6 6
SMSA Stanchion mount 7
TRA/TRB Tree mounted T-box aluminum/bronze
TRAS/TRBS Tree strap4
WBC35R/WBC4O Wall box cover3, 5 5 5
WMC Wall mount cover3
WMSA Wall mount with integral splice box
WMSA EA Wall mount with extended arms 7
WMP Wall mount plate
WMP EA Wall mount plate for extended arm 7
WMP EAS Wall mount plate with extended arm strut 7
BALLAST
AGB Above-ground ballast (175W max. – remote)
BPCA/BPCB Big polymer combo box (175W max.)
BPTA Big polymer transfomer box (300W max. low voltage)
BSB Big surface box (175W max.)5
BSB EA Big surface box with extended arms (175W max.) 7
BSBTS Big surface box with tree strap (175W max.)5
CBA/CBB Combo box (175W max.)
EBA/EBB Encapsulated ballast box (100W max.)
RACB Round aluminum combo box (100W max.) 5 5 5 5
SCA/SCB Small transformer box, aluminum or bronze (75W max.)
SPCA Small polymer combo box (70W max.)
SSB Small surface box (70W max.) 5 5 5 5
SSB EA Small surface box with extended arms (70W max.) 7
SSBTS Small surface box with tree strap (70W max.) 5 5 5 5
TRMT Tree mount transformer
FLOOD & LANDSCAPELIGHTING
Mounting Accessories
Flood & Landscape Lighting MountingPRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com676
Ground & Wall Mounting
NotesFor WMP, SSBTS, BSBTS and RACB, visit www.hydrel.com.
12-1/4(31.1)
12-1/4(31.1)
12-1/4(31.1)
24(61.0)
6(15.2)
2-1/4(5.7)
6(15.2)
2-1/4(5.7)
36(91.4)
6(15.2)
2-1/4(5.7)
12(30.5)
8-7/8(22.5)
8-7/8(22.5)
8-7/8(22.5)
24(61.0)
12(30.5)
36(91.4)
6(15.2)
2-1/4(5.7)
6(15.2)
2-1/4(5.7)
6(15.2)
2-1/4(5.7)
24(61.0)
12(30.5)
6(15.2)
6(15.2)
6(15.2)
36(91.4)
2-1/4(5.7)
2-1/4(5.7)
2-1/4(5.7)
12-1/4(31.1)
12-1/4(31.1)
12-1/4(31.1)
36(91.4)
24(61.0)
12(30.5)
6(15.2)
9(22.9)
6(15.2)
9(22.9)
6(15.2)
9(22.9)
(22.9)
24(61.0)
12(30.5)
36(91.4)
6(15.2)
6(15.2)
6(15.2)
9(22.9)
9(22.9)
9(22.9)
12-1/4(31.1)
12-1/4(31.1)
12-1/4(31.1)
24(61.0)
12(30.5)
36(91.4)
24(61.0)
12(30.5)
6(15.2)
6(15.2)
6(15.2)
36(91.4)
4-1/8(10.5) 4-5/8
(11.7)2-7/8(7.3)
4-1/4(10.8)
1/2(1.3) 6
(15.2)
1(2.5)
8-1/8(20.6)
6(15.3)
4-1/4(10.8)
6(15.3)
4 (10.2)
4 (10.2)
9-1/2 (24.1)
5-1/8 (13.0)
4-1/2 (11.4)
8-7/8(22.4)
5-7/8(14.9)
4-1/8(10.5)
2-3/8(6.0)
12-1/4(31.1)
12-1/2(31.8)
4-1/8 (10.5)
2-3/8(6.0)
WBC40BSB
8-7/8(22.5)
8-7/8(22.5)
8-7/8(22.5)
24(61.0)
12(30.5)
36(91.4)
8-7/8(22.5)
8-7/8(22.5)
8-7/8(22.5)
36(91.4)
24(61.0)
12(30.5)
6(15.2)
9(22.9)
9(22.9)
6(15.2)
6(15.2)
9(22.9)
(22.9)
EA on BSB (HID 100 – 150W)
EA on SSB (LV, HID 35 – 70W)
EA on WMSA (Incandescent) EA45 on WMSA (Incandescent) EA90 on WMSA (Incandescent)
EA90 on SSB (LV, HID 35 – 70W)EA45 on SSB (LV, HID 35 – 70W)
EA45 on BSB (HID 100 – 150 W) EA90 on BSB (HID 100 – 150 W)
SSB WMC WMSA WBC35R AGB TRMT T1903
GROUND & WALLMounting Accessories
MO
UN
TIN
G A
CCES
SOR
IES PRODUCT INFORMATION
HYD
REL
677www.hydrel.com | 1-800-750-9773PSG10
MO
UN
TING
ACCESSOR
IES
3(7.6)
3(7.6)
3-3/4(9.5)
6(15.2)
3-1/4(8.3)
4-1/4(10.8)
4-3/4(12.1)
4-1/8(10.5)
2-3/4(7.0)
4-1/8(10.5)
4-1/4(10.8)
6(15.2)
6(15.2)
18(45.7)
6(15.2)
6(15.2)
7(17.8)
18-1/4(46.4)
2-1/2(6.4)
20-1/4(51.4)
2-1/2(6.4)
PMT Pole Mount Tee
SMT Stanchion Mount Tee
PAR4 Pole Arm RoundPAS4 Pole Arm Square
PATR4 Pole Arm Twin RoundPATS4 Pole Arm Twin Square
6-1/2(16.5)
12(30.5)
7-3/8(18.7)
7-3/4(19.7)3-1/4
(8.3)
7(17.8) 3-7/8
(9.8)
8-1/4(30.0)
5-3/4(14.6)
8(20.5)
5(12.7)
9-1/4(23.5)8-1/8
(20.6)
7-3/8(18.7)
8-7/8(22.5)
9-1/2(24.1)
5(12.7)
12(30.5)
7-1/8(18.1)
4-1/4(10.8)
10(25.4)
10-1/2(26.7)
9(22.9)
6-1/2(16.5)
6(15.2)
18(45.7)
3-3/4(9.5)
5(12.7)
3-1/4(8.3)
7(17.8)
6(15.2)
2-1/4(5.7)
6-1/2(16.5)
3-1/2(8.9)
24(61.0)
6(15.2)
18(45.7)
24(61.0)
3-1/2(8.9)
6-1/2(16.5)
12(30.5)
18(45.7)
24(60.8)
6(15.2)
3-5/8(9.2)
3-1/2(8.9)
5-1/2(14.0)
12(30.5)
18(45.7)
24(60.8)
6(15.2)
3-5/8(9.2)
3-1/2(8.9)
5-1/2(14.0)
Ground, Wall & Pole Mounting
12(30.5)
7/8(2.2)
18(45.7)
7/8(2.2)
12(30.5)
3(7.6)
18(45.7)
3(7.6)
TRATRB
TRASTRBS
ARJB FJB JBAJBB
SMSA PSSA MS18MSB18
MS12MSB12
PSPSS SBA18
SBB18SBA12SBB12
BPTA SPCASPCB
BPCABPCB
CBACBB
SCASCB
EBBEBA
EWM Extended Wall Mount PMSA Pole Mount TRJB Tree Mount
GROUND, WALL & POLEMounting Accessories
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com678
LAN
DSC
AP
E LI
GH
TIN
G
PRODUCT INFORMATION
4511
Series Lamp type Voltage Distribution3 Mounting accessories Lamped Finish
4511 Low voltage
M35
121
1202
2772
NR No reflector
SP Spot
NFL Narrow flood
See page 675. LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
Intended Use
Low-profile accent light
for shrubs, planters or wall
mountings.
Construction
Material: Housing is
machined aluminum alloy.
Knuckle is cast bronze.
Optics
Lens: Tempered flat glass.
Electrical
Lamp: Low-voltage – MR11,
35W max.
Installation
Mounting: 1/2" NPT adjust-
able knuckle.
Listings
U.L., CSA, IP66, suitable for
wet locations.
Requires low-voltage supply.
Example: 4511 M35 12 SP WMC LPI DNA
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Transformer sold separately.
2 Only valid when transformer box is ordered.
3 Distribution only required with LPI option. All others choose NR.
Notes1 Transformer sold separately.
2 Only valid if transformer box is ordered.
3 Distribution only required with LPI option. All others choose NR.
PRODUCT INFORMATION Accent Lighting
4516
Series Lamp type Voltage Distribution3 Mounting accessories Lamped Finish
4516 Low-voltage
M50
121
1202
2772
NR No reflector
SP Spot
NSP Narrow spot
FL Flood
NFL Narrow flood
WFL Wide flood
See page 675. LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
Intended Use
Low-profile accent light
for shrubs, planters or wall
mountings.
Construction
Material: Housing is die-cast,
copper-free aluminum alloy
A360. Knuckle is cast bronze.
Optics
Lens: Tempered flat glass.
Electrical
Lamp: Low-voltage – MR16
quartz halogen, 50W max.
Installation
Mounting: 1/2" NPT adjust-
able knuckle.
Listings
U.L., CSA, IP66, suitable for
wet locations.
Requires low-voltage supply.
Example: 4516 M50 12 SP WMSA LPI DNA
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5-3/8(13.7)
3-1/2(8.9)2-5/8
(6.7)
2(5.1)
3-1/4(8.3)
2-3/4(7.0)
5-1/8(13.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Accent Lighting
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
679www.hydrel.com | 1-800-750-9773PSG10
LAN
DSCA
PE LIG
HTIN
G
4521
Series Lamp type Voltage Distribution4 Lens Mounting accessories Options Lamped Finish
4519 Incandescent1
P38100I
P38120I
P38250I
Ceramic metal halide2
P2035CM
P3870CM
P38100CM
Metal halide2
P3870M
P38100M
P38150M
120
208
240
277
347
120/277
MVOLT3
TB
NR No reflector
SP Spot
FL Flood
WFL Wide flood
CLC Convex lens clear5
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
See page 675. External accessories
GS Glare shield
Fusing
SF Single fuse6
DF Double fuse7
Ballast
GEB Electronic ballast
LPI Lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
PRODUCT INFORMATION
4519Intended Use
Spotlights architectural or land-
scape features from the ground,
wall mountings or trees.
Construction
Material: Cast aluminum with
cast bronze knuckle.
Fasteners: Stainless steel.
Optics
Lens: Incandescent: No lens.
Lamp face forms lens on incan-
descent. HID – convex, clear
tempered glass. Amber, blue,
green or red lenses available.
Electrical
Lamp: Incandescent – PAR38
250W max. Metal halide –
PAR38 150W max.
HID requires separate ballast
box.
Installation
Mounting: 1/2" NPT
adjustable knuckle.
Listings
U.L., CSA, suitable for wet
locations.
Example: 4519 P38250I 120 SP JBA LPI DDB
Example: 4521 100M 120 SP CLC BPCA GS SF LPI BZ
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Series Lamp type Voltage Distribution3 LensMountingaccessories Options Lamped Finish7
4521 Incandescent1
P38100I
P38150I
Metal halide2
P3035CM
P3070CM
P3870M
P3870CM
P38100M
P38100CM
P38150M
70M
70CM
100M
100CM
150M
High pressure sodium2
70S
100S
150S
1201
208
240
277
347
120/277
MVOLT8
SP Spot
FL Flood
CLC Convex lens clear4
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
See page 675. External accessories
FGS Full glare shield
GS Glare shield
Fusing
SF Single fuse5
DF Double fuse6
Ballast
GEB Electronic ballast
LPI Lamp included
BZ Bronze
BL Black
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
PRODUCT INFORMATION Accent Lighting
Intended Use
The graceful style of this
adjustable up-light is used
extensively for spot or
floodlighting shrubs, trees
and building facades.
Construction
Strongly constructed of cop-
per and bronze with durable
silicone sealing gaskets, the
fixture is completely
weatherproof. The shield
provides maximum beam
control with minimum side
glare. The metal weathers
naturally to a patina of soft
copper tones. Provided with
clear tempered lens.
Material: Heavy-gauge spun
copper body with cast bronze
knuckle and sealing rings.
Finish: Bright dipped natural
copper standard. Painted
finish also available. See
ordering guide for options.
Fasteners: Stainless steel.
Optics
Distribution: E17 lamps –
Spot and flood. PAR lamps –
Beam spread by lamp type.
Lens: Convex, tempered glass.
Electrical
Lamp: Incandescent – PAR38,
150W max. HID – PAR38,
150W max. E17, 150W max.
Socket: Pulse rated medium
base.
Installation
Mouting: 3/4" NPT adjust-
able knuckle. Separate
ballast enclosure required
for HID models.
Listings
U.L.
9-1/4(23.5)
6-3/8(16.6)
2-1/2(7.6)
Notes1 Available with 120V only.
2 Separate ballast enclosure required for HID models.
3 MVOLT is standard on metal halide lamps with GEB ballast option.
4 Not all distributions available with all lamp types; use NR when not using LPI option.
5 CLC will be used if no lens is chosen on HID.
6 SF is available with 120V or 277V on HID only.
7 DF is available with 208V, 220V or 240V on HID only.
Notes1 Available with 120V only.
2 Separate ballast enclosure required for HID models.
3 E17 lamps valid with flood (FL) distribution only.
4 CLC is the default lens.
5 SF is only available with 120V, 277V or 347V on HID only.
6 DF is only available with 208V, 220V, 240V on HID only.
7 Paint finish is optional; standard fixture is natural copper.
8 MVOLT is standard on metal halide lamps with GEB ballast option.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
17(43.2)12
(30.5) 7-3/8(18.7)
Accent Lighting
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com680
LAN
DSC
AP
E LI
GH
TIN
G
PRODUCT INFORMATION
4524Intended Use
Accents trees, shrubs, signs
and walls from the ground,
wall mountings or trees.
Construction
Material: Cast aluminum or
bronze.
Finish: Aluminum models –
See ordering guide for color
options. Bronze models –
Natural bronze.
Fasteners: Stainless steel.
The optional glare shield
eliminates source glare while
still allowing for maximum
light output. Heat-resistant,
tempered lens and silicone
gasket provide weathertight
protection.
Optics
Lens: Clear convex tempered
glass. Amber, blue, green and
red lenses also are available.
Electrical
Lamp: Low-voltage – MR16,
75W max. Incandescent –
PAR16 or PAR20, 60W max.
HID – Metal halide PAR20,
35W max.
Installation
Mounting: 1/2" NPT adjust-
able knuckle. HID requires
separate ballast box.
Listings
UL, CSA, suitable for wet
locations.
Example: 4524 A P2035CM 277 SP CLC SPCA LP BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Series Material Lamp type Voltage DistributionMountingAccessories Options Lamped Finish7
4525
A Aluminum
B Bronze
Incandescent1
P38100I
P38150I
P38250I
Metal halide2
70M
70CM
100M
100CM
150M
175M
P3870M
P3870CM
P38100M
P38100CM
P38150M
High pressure sodium2
70S
100S
150S
120
208
220
240
277
347
TB
SP Spot
FL Flood
See page 675.
Internal accessories
IHL Internal honeycomb louver3
External accessories
GS Glare shield
FGS Full glare shield
Fusing
SF Single fuse5
DF Double fuse6
LPI Lamp Included
BZ Bronze
BL Black
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
PRODUCT INFORMATION Accent Lighting
4525Intended Use
Accents trees, shrubs, signs
and walls from the ground,
wall mountings or trees.
Construction
Material: Cast aluminum or
bronze.
Finish: Aluminum models –
See ordering guide for color
options. Bronze models –
Natural bronze.
Fasteners: Stainless steel.
The optional glare shield
eliminates source glare while
still allowing for maximum
light output. Heat-resistant,
tempered lens and silicone
gasket provide weathertight
protection.
Optics
Distribution: HID – Spot or
fused, PAR lamp determined
by lamp type.
Lens: Convex tempered glass,
clear.
Electrical
Lamp: Incandescent – PAR38,
250W max. HID – PAR38 or
ED17, 175W max.
Socket: Pulse rated medium
base or E27 (European)
standard.
Installation
Mounting: 1/2" NPT adjust-
able knuckle. Separate ballast
box required for HID models.
Listings
UL, CE, CB, NEMKO, CSA.
Example: 4525 A 100CM 277 FL BSB GS SF LPI BZ
5-5/8(14.0)
3-7/8(9.8)
6(15.2) Notes
1 Separate ballast enclosure required for HID models, transformers for low-voltage lamps.
2 Transformer sold separately.
3 Only available with HID lamps.
4 Not all distributions available with all lamp types; use NR when not using LPI option.
5 CLC will be used if no lens is chosen on HID.
6 SF is available with 120V, 277V or 347V on HID only.
7 DF is available with 208V or 240V on HID only.
8(20.3)
12-1/2(31.8)
8-1/2(21.6)
7(17.8)
Notes1 Incandescent models available with 120V only.
2 Separate ballast enclosure required for HID models.
3 Only available with PAR lamps.
4 STB available on PSS_, BPCA and SPCA only.
5 SF is only available wth 120V,277V or 347V on HID only.
6 DF is only available with 208V, 220V or 240V on HID only.
7 Finish is only available on fixtures with aluminum material.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Accent Lighting
Series Material Lamp type Voltage Distribution4 Lens5Mounting accessories Options Lamped Finish
4524 A Aluminum
B Bronze
Low-voltage1
M35
M50
M75
Ceramic metal halide1
P2035CM
Incandescent
P1640I
P1655I
P1660I
P2050I
P2060I
122
120
2083
2403
277
347
120/2773
MVOLT3
TB3
NR No reflector
SP Spot
NSP Narrow spot
FL Flood
NFL Narrow flood
WFL Wide flood
CLC Convex lens clear
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
See page 675.
Internal accessories
IHL Internal honeycomb louver
External acessories
GS Glare shield
Fusing
SF Single fuse6
DF Double fuse7
LP Lamp installed
BL Black SND Sand
BZ Bronze STG Steel gray
DDB Dark bronze TVG Terra verde green
DNA Natural aluminum
WH White
GN Green CF Custom
GR Gray
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
681www.hydrel.com | 1-800-750-9773PSG10
Accent Lighting
Series Lamp type Voltage Distribution5 MountingMounting accessories Options Cord set length Lamped Finish
46101
46202
Low-voltage
M202
M352
M502
M751
Ceramic metal halide3
P2035CM
35CMT44
121
120
208
240
277
347
120/277
MVOLT
TB
NR No reflector
SP Spot
NSP Narrow spot
FL Flood
NFL Narrow flood
WFL Wide flood
YM Yoke mount
KM Knuckle mount
See page 675.
Internal accessories
IHL Internal honeycomb louver10
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
External accessories
FGS Full glare shield
GS Glare shield
Fusing
SF Single fuse6
DF Double fuse7
Ballast
GEB Electronic ballast8
CSL 10'-50' of cord (available in 5' increments)9
LPI Lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
Series Material Lamp type Voltage Distribution1 Mounting accessories Lamped Finish2
4529 A Aluminum
B Bronze
Incandescent
P38100I
P38150I
120 NR No reflector
SP Spot
FL Flood
WFL Wide flood
See page 675. LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
PRODUCT INFORMATION
4529Intended Use
Uplighting of trees, signs,
walls and building facades.
Construction
Material: Cast aluminum or
cast bronze body and glare
shield. Knuckle is cast bronze.
Fasteners: Stainless steel.
Optics
Lens: None.
Electrical
Lamp: Incandescent – PAR38
medium-base.
Installation
Mounting: 1/2" NPT adjust-
able knuckle.
Listings
U.L., suitable for wet locations.
Example: 4529 B P38150I 120 SP JBB LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Not all distributions available with all lamp types; use NR when not
choosing LPI option.
2 Finish required on aluminum products.
Notes1 Transformer, sold sperately.
2 Transfomer included on 4620 unless 12V is specified.
3 Separate ballast enclosure required; available on 4620 only.
4 Requires GEB ballast.
5 Not all distributions available with all lamp types; use NR when not choosing LPI option.
6 SF is available with 120V, 277V or 347V on HID only.
7 DF is available with 208V or 240V on HID only.
8 Only available with metal halide lamps and MVOLT voltage.
9 Only valid with yoke mount.
10 Not available with 35CMT4 lamps.
PRODUCT INFORMATION Accent Lighting
4610 4620
Intended Use
Tree-mounted or ground-
mounted uplighting, or
building-mounted facade
lighting.
Construction
Material: Fixture, knuckle,
yoke are copper-free alu-
minum A360. All aluminum
materials are chem filmed or
anodized prior to painting.
Fasteners: Stainless steel.
Optics
Lens: Crowned tempered
glass.
Electrical
Lamp: MR16, 75W max.
Ceramic metal halide,
35W max.
Installation
Mounting: Knuckle 1/2" NPT
adjustable. Yoke mount with
a minimum of 10' of 18/3
STW cord. Cord length must
be specified.
Listings
U.L., C.U.L., IP66, suitable for
wet locations.
Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND
9(22.9)
2-5/8(6.7) 3-3/4
(9.5)
6(15.2)
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
5-1/8(13.1) 3
(7.6)
4-1/4(10.8)
4-1/4(10.8)
3(7.6)
5-1/8(13.0)
4610 YM 4610 KM 4620 YM 4620 KM
3(7.6)
4-1/4(10.8)
7-1/8(18.0)3
(7.6)7-1/8(18.0)
5-1/4(13.3)
Visit www.hydrel.com for monochromatic LED specifications.
ORDERING INFORMATION
ORDERING INFORMATION
LAN
DSCA
PE LIG
HTIN
GPRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com682
LAN
DSC
AP
E LI
GH
TIN
G
Series Lamp type Voltage Distribution MountingMounting accessories Options
4630
4640
Incandescent1
P38100I8
P3075I9
P38150I8
Quartz1, 8
150Q
Ceramic metal halide2
P3035CM9
P3070CM9
35CMT68
70CMT68
150CMT68
Metal halide2, 8
70M
P3870M
P38100M
100M
150M
P38150M
High pressure sodium2, 8
70S
100S
120
208
240
277
347
120/277
MVOLT6
TB
NR No reflector3
SP Spot
MFL Medium flood8
FL Flood
YM Yoke mount
KM Knuckle mount
See page 675. Internal accessories
IHL Internal honeycomb louver
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
LSF Linear spread filter
Options (continued) Cord set length7 Lamped Finish
External accessories
FGS Full glare shield
GS Glare shield
Fusing
SF Single fuse4
DF Double fuse5
Ballast
GEB6 Electronic ballast
CSL_ 10'-50' of cord (available in 5' increments)
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4630 4640
Intended Use
Landscape and architectural
applications.
Construction
Material: Fixture, knuckle,
yoke – die-cast, copper-free
aluminum alloy A360. All
materials are chem-filmed or
anodized prior to painting.
Fasteners: Stainless steel.
Optics
Lens: Crowned tempered glass.
Electrical
Lamp: Incandescent – 150W
max. HID– Metal halide
150W max.
Installation
Mounting: Knuckle: – 1/2:"
NPT adjustable. Yoke –
minimum of 10 ft 18/3 STW
cord. Cord length must be
specified.
Listings
U.L., C.U.L., C.E., IP66, suit-
able for wet locations.
Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
8-1/8(20.6) 5-1/4
(13.3)
4-1/4(10.8)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
4630 Knuckle Mount4640 Knuckle Mount
8-1/8(20.6) 5-1/4
(13.3)
5-1/4(13.3)
4630 Yoke Mount
4640 Yoke Mount
Notes1 Available in 120V only.
2 Separate ballast enclosure required.
3 Only valid if LPI is not chosen.
4 SF is available with 120V, 277V or 347V on HID only.
5 DF is available with 208V or 240V on HID only.
6 MVOLT default if GEB selected; only valid with metal halide lamps.
7 Only valid with yoke mount.
8 Available with 4640 only.
9 Available with 4630 only.
9-3/8(23.8) 6-1/2
(16.5)
4-3/4(12.1)
9-3/8(23.8) 6-1/2
(16.5)
6-1/4(15.9)
Accent Lighting
Visit www.hydrel.com for monochromtic LED specifications.
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
683www.hydrel.com | 1-800-750-9773PSG10
LAN
DSCA
PE LIG
HTIN
G
Series Lamp type Voltage Distribution4 Mounting Mounting accessories Options
4650 Incandescent1
P38100I
250Q
P56300I
Ceramic metal halide2
70CMT6
P38100CM
150CMT6
Metal halide2
70M
100M
150M
P38100M
P38150M
120
208
240
277
347
120/277
480
MVOLT3
TB
NR No reflector
TSP Tight spot
SP Spot
NSP Narrow spot
MFL Medium flood
FL Flood
NFL Narrow flood
WFL Wide flood
YM Yoke mount
KM Knuckle mount
See page 675. Internal accessories
IHL Internal honeycomb louver
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
External accessories
FGS Full glare shield
GS Glare shield
Fusing
SF Single fuse5
DF Double fuse6
Ballast
GEB Electronic ballast7
Cord set length8 Lamped Finish
CSL_ 10'-50' of cord (available in 5' increments) LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4650Intended Use
These large, versatile accent
lights provide illumination
for a variety of architectural
and landscape applications
to 60'.
Construction
Material: Die-cast, copper-
free aluminum alloy A360.
All aluminum materials are
chem-filmed or anodized
prior to painting.
Finish: See ordering guide for
color options.
Fasteners: Stainless steel.
Optics
Lens: Crowned tempered glass.
Electrical
Lamp: Incandescent – T4,
250W max.; PAR 56 – 300W
max. HID – E17, T6 or PAR38,
150W max.
Socket: Incandescent – Mini-
can (T4) or mogul end prong
(PAR 56). HID – Medium-base
or G12 base.
Voltage: See ordering guide.
Installation
Mounting: Knuckle – 1/2"
NPT. Yoke – With a minimum
of 10' 18/3 STW cord. Cord
length must be specified.
Listings
U.L., C.U.L., C.E., IP66, suit-
able for wet locations.
Example: 4650 150M TB SP KM BSB FGS IHL LP DDB
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
11-5/8(29.5) 8-1/2
(21.6)
4-3/4(12.1)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Knuckle Mount Yoke Mount
Notes1 120V only.
2 Separate ballast enclosure required.
3 Standard on metal halide lamps with GEB ballasts.
4 Not all distributions available with all lamp types; use NR when not choosing LPI on PAR lamps.
5 SF is available with 120V, 277V or 347V on HID only.
6 DF is available with 208V or 240V on HID only.
7 GEB default if MVOLT selected; only valid with metal halide lamps.
8 Only valid with yoke mount.
11-5/8(29.5) 8-1/2
(21.6)
6-1/4(15.9)
Accent Lighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com684
LAN
DSC
AP
E LI
GH
TIN
G
Series Lamp type Voltage Distribution LensMounting accessories Options Lamped Finish
4709 Incandescent1
P38100I
P38150I
Metal halide2
P3870CM
P38100CM
P3870M
P38100M
P38150M
120
208
240
277
347
120/277
MVOLT3
TB
NR No reflector
SP Spot
FL Flood
CLC Convex lens clear4
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
See page 675.
Internal accessories
IHL Internal honeycomb louver
External accessories
GS Glare shield
Fusing
SF Single fuse5
DF Double fuse6
Ballast
GEB Electronic ballast7
LP Lamp installed
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4709Intended Use
Designed for installation
where cost and reliability are
paramount.
Construction
Material: Die-cast aluminum.
Fasteners: Stainless steel.
Optics
Lens: Convex tempered
glass (HID); lens optional on
incandescent models.
Electrical
Lamp: Incandesent – PAR38,
250W max. HID – PAR38,
150W max.
Socket: Pulse-rated
medium-base.
Installation
Mounting: 1/2" NPT
adjustable knuckle.
Listings
U.L., C.U.L., suitable
for wet locations.
Example: 4709 P3870M 120 SP CLC SPCA LP BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5(12.7)
5-3/8(13.7)
9(22.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Incandescent models valid with 120V only.
2 Separate ballast enclosure required for HID models.
3 Standard on metal halide lamps with GEB ballast.
4 CLC lens provided on all HID models, optional on incandescent.
5 SF available with 120V, 277V or 347V on HID only.
6 DF available with 208V, 220V or 240V on HID only.
7 Only available with metal halide lamps and MVOLT voltage.
Accent Lighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
685www.hydrel.com | 1-800-750-9773PSG10
LAN
DSCA
PE LIG
HTIN
G
Series Lamp type Voltage Distribution Mounting accessories1 Options Lamped Finish
4720 Metal halide
70CMTD RSC
150CMTD RSC
70CMT6 G12
150CMT6 G12
High pressure sodium
70SDW PG12
100SDW PG12
120
208
220
240
277
347
TB
SP Spot
MFL Medium flood
FJB Flush J-box
PSSA Ped. stanchion mount 7" splice access
SMSA_ 12" - 48" stanchion mount, available in 6" increments
WMSA Wall mount splice access
Internal accessories
IHL Internal honeycomb louver
External accessories
FGS Full glare shield
Fusing
SF Single fuse2
DF Double fuse3
Door clips
TDC Tool-less door clips
LPI Lamp included
BZ Bronze
BL Black
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom finish
Intended Use
Designed for installations
where function, appearance
and durability are essential
considerations.
Construction
The 4720 Series architectural
accent light meets the most
demanding requirements.
Integral ballast with heavy
cast aluminum construc-
tion adds up to a fixture of
exceptional quality. The
unit is weather-tight with
a heat-resistant, tempered
convex lens. Supplied as a
knuckle-mounted unit.
Material: Heavy wall cast
aluminum body and knuckle.
Fasteners: Stainless steel.
External door fasteners are
Teflon® coated stainless steel.
Optics
Distribution: Spot (SP) or
medium flood (MFL).
Lens: Clear convex tempered
glass.
Accessories: External glare
control.
Electrical
Lamp: MH: (T-6), 150W max.
HPS: T10, 100W max.
Socket: MH – T6, G12 bi-pin
or RSC double-ended 150W
max. HPS – T10, PG12 bi-pin.
Ballast: High power factor
magnetic ballast standard. Bal-
last included in fixture head.
Installation
Mounting: 3/4" NPT male
adjustable knuckle with
self-releasing taper allows
infinite vertical adjustment
through 180°.
Listings
U.L.
Example: 4720 150CMTD 120 SP PSSA IHL SF LPI BZ
10-1/2(26.7)
9-7/8(25.1)
10-7/8(27.6)
4(10.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 See individual mounting specification sheets for conduit/drilling options.
2 SF is only available with 120V, 277V or 347V on HID only.
3 DF is only available with 208V, 220V or 240V on HID only.
4720
Accent Lighting
ORDERING INFORMATION
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com686
STEP
& B
OR
DER
Series Material Lamp type Voltage Options Lamped Finish
4451
4452
4453
A Aluminum
B Bronze
Incandescent
40I1
Fluorescent
7TT
9TT
13DTT
2/7TT2
2/9TT2
2/13DTT2
120
277
347
External accessories
LLV Louver door
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4451 4452 4453
Intended Use
For use in outdoor wet
locations, such as patios
and pathways at hospitals,
hotels, schools, airports and
parking garages.
Construction
Material: Cast aluminum or
cast bronze. Aluminum body
black permabarred.
Fastners: Stainless steel.
Accessories: Louver door, 45°
cut-off.
Optics
Lens: Diffused, tempered
glass for non-louvered door.
Clear, tempered glass for
louvered door.
Electrical
Lamp: Incandescent – 40W
max, A19 lamp. Fluorescent
– single or double 13W max.
CFL twin tube or double
twin tube.
Socket: Incandescent – Me-
dium screw base. Fluorescent
– 2G7 or GX24Q-1 base.
Ballast: Fluorescent – Elec-
tronic ballast high frequency
with 0°F (-18°C) minimum
starting temperature.
Conduit entry: 3/4" NPT side
entries standard.
Listings
U.L., CSA, suitable for wet
locations.
Example: 4451 A 13DTT 120 LPI SND
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5-3/8(13.6)
3(11.6)
4-5/8(11.3)
10-1/2(26.7)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
4451
5-1/4(13.3)
4(10.2)
4-1/2(11.3)
10-1/4(26.0)
4452
3-3/4(9.5)
3-7/8(9.8)
10-1/4(26.0)
2-1/4(5.7)
4453
Notes1 Incandescent models available with 120V only.
2 Only available with 4452.
Step Lights
ORDERING INFORMATION
4451
4452
4453
PRODUCT INFORMATION
HYD
REL
687www.hydrel.com | 1-800-750-9773PSG10
STEP &
BO
RD
ER
Series Material1 Lamp type Voltage Options Lamped Finish
4454
4456
A Aluminum
B Bronze
Incandescent
75I2, 3
Fluorescent3
18TRT
26TRT
32TRT
42TRT
Metal halide
50M
High pressure sodium2
35S
50S
120
277
347
MVOLT5
Fusing
ELN Emergency battery backup3, 4
SF Single fuse5
External accessories
LLV Louver door
LPI Lamp included BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4454 4456
Intended Use
For use in outdoor wet
locations such as patios
and pathways at hospitals,
hotels, schools, airports and
parking garages.
Construction
Material: 4454 – Cast
aluminum or cast bronze.
Aluminum body black
permabarred. 4456 –
Cast aluminum.
Fastener: Stainless steel.
Optics
Lens: Diff used, tempered
glass for non-louvered door.
Clear, tempered glass for
louvered door.
Electrical
Lamp: HID – 50W max,
E17 lamp.
Socket: Medium screw base,
pulse-rated.
Ballast: HID – Magnetic ballast
high power factor with -20°F
(-29°C) minimum starting
temperature. Fluorescent –
Electronic ballast high frequen-
cy with 0° F (-18°C) minimum
starting temperature.
Conduit entry: 3/4" NPT side
entries standard.
Listings
U.L., CSA, suitable for wet
locations.
Example: 4456 42TRT 120 ELN LPI DDB
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5-1/4(13.3)
10-1/4(26.0)
4(10.2)
8-5/8(21.9)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
4454
6(15.2)
5-1/8(14.0)
6-1/2(16.5)
13(33.0)
4456
Notes1 Not available with 4456.
2 Available in 120V only.
3 Not available with 4454.
4 Only available with fl uorescent lamps.
5 Only available with metal halide lamps.
Step Lights
ORDERING INFORMATION
4454
4456
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com688
STEP
& B
OR
DER
Series Lamp type Voltage Distribution Options Cord set length Lamped
4462 Incandescent
90I
Quartz
75Q
Low-voltage
2/M35
121
120
NR No reflector2
SP Spot2
NSP Narrow spot2
FL Flood
NFL Narrow flood2
WFL Wide flood2
External accessories3
LLV Louver door
RG Rock guard
CSL_ 35'-120' of cord4 LPI Lamp included
4462Intended Use
Meets installation require-
ments for wood and all
(insulation) type IC applica-
tions. Fixtures are completely
weatherproof with neoprene
gasket and tempered lens.
Construction
Fixture housing and door:
Heavy wall cast bronze
construction. Natural
bronze finish.
Gasket: Single piece, molded
U-shaped silicone.
Cord: Minimum of 35' of
#16-3ST submersible rated
cord. Cord entrance is brass
water-tight seal and epoxy
encapsulated. Cord length
must be specified.
Fasteners: Stainless steel.
Optics
Lens: Tempered borosilicate
diffuse glass standard. Clear
tempered borosilicate glass.
Electrical
Lamp: Incandescent – A19
90W max., 120V. Quartz
halogen – T4 75W max.,
120V. Low-voltage – two
MR16, 35W max. each.
Socket: Incandescent – Me-
dium base. Quartz halogen
– Mini-can screw base. Low-
voltage – Gx5.3 bi-pin.
Installation
Niche: Stainless steel with
cast bronze mounting frame
which has provisions for
locking fixture into position.
Single conduit entrance is
3/4" NPT with 3/4" x 1/2" NPT
reducer bushing.
System Features
Factory leak tested: Fixtures
are tested at 10 PSI (0.70kg/
cm2) internal pressure while
totally submerged in water.
Listings
U.L., C.U.L., IP67.
Example: 4462 2/M35 12 FL RG CSL50 LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
5-3/8(13.7)
6-7/8(17.5)
11(27.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Transformer sold separately. Only available with 2/M35.
2 Only available with 2/M35.
3 Accessories are mutually exclusive. Choose one.
4 CSL 50 is maximum length for 12V fixtures.
Step Lights
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
689www.hydrel.com | 1-800-750-9773PSG10
STEP &
BO
RD
ER
Series Lamp type Voltage Conduit entry Options Lamped Finish
M4534 Incandescent1
60I
100Q
Fluorescent
18TRT
26TRT
32TRT
Metal halide
50M
70M
100M
Ceramic metal halide
35CMT6
70CM
70CMT6
100CM
High pressure sodium
35S1
50S1
70S
100S
120
208
240
277
347
MVOLT2
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom (default)
34S 3/4" NPT side
Internal accessories
MILS90 Internal 90° light shield
MILS180 Internal 180° light shield
Fusing
SF Single fuse3
DF Double fuse4
Ballasts5
GEB Electronic ballast
MLEBAD Electronic dimming ballast6
LPI Lamp included
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
M4534Intended Use
This unique style and
distinctive fixture are ideal
for installation in sidewalks
or promenades – designed to
be recessed in concrete, flush
to lower rim.
Construction
Material: Cast aluminum
housing with integral 24"
junction box (incandes-
cent) or ballast box (HID,
fluorescent).
Gasket: Molded silicone.
Glare control: Black finish
Glarefoil included.
Optics
Lens: Molded, tempered,
borosilicate.
Electrical
Lamp: Incandescent – 60W
max., A15 or T10/tubular.
100Q (quartz) 100W max.,
T4/tubular. HID – 100W
max., E17/elliptical or T6/
G12. Fluorescent – 32TRT,
32W max.
Socket: Quartz – Mini-can
base. Fluorescent – Gx24Q-3
base. HID, incandescent –
pulse-rated medium base.
Conduit entry: Two 3/4" NPT,
1/2" NPT side or bottom
openings available.
Listings
U.L., C.U.L.
Example: M4534 70CMT6 MVOLT 34S MILS180 GEB LPI STG
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
9-1/2(24.2)
10-1/4(26.0)
5-1/4(13.3)
4-3/8(11.2)
4(10.2)
8-3/8(22.2)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Only available in 120V.
2 MVOLT is only available with fluorescent and metal halide lamps with GEB or MLEBAD options.
3 SF available with 120V, 277V or 347V and HID only.
4 DF available with 208V or 240V and HID only.
5 Only available with metal halide lamps and MVOLT voltage.
6 0-10V dimmer not included.
Border Lights
HID, FluorescentIncandescent
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com690
STEP
& B
OR
DER
Series Lamp type Voltage Conduit entry Options Lamped Finish
4540 Metal halide
50M
70M
Ceramic metal halide
35CMT4
35CMT6
70CM
70CMT4
70CMT6
120
208
240
277
347
MVOLT1
12B 1/2" NPT bottom
34B 3/4" NPT bottom (default)
Internal accessories
MILS90 Internal 90° light shield
MILS180 Internal 180° light shield
Fusing
SF Single fuse2
DF Double fuse3
Ballast4
GEB Electronic ballast
MLEBAD Electronic dimming ballast5
LP Lamp installed BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
4540Intended Use
This unique and distinctive
fixture has been custom de-
signed for installation along
park walkways and sidewalks.
Construction
Material: The bollard section
is fabricated from heavy cast
aluminum.
Rough-in section: Injection-
molded ABS, U.V. stabilized,
impact- and corrosion-
resistant for use in all types
of environments.
Optics
Lens: Molded tempered glass.
90° cutoff with internal louver.
Electrical
Lamp: HID – 100W max.,
E-17/elliptical or 70W T6/G12.
Socket: Pulse-rated
medium base.
Conduit connection: Two
3/4" NPT bottom openings
are standard in the cast
aluminum integral junction
box. Suitable for through-
branch wiring, this box has
24" of volume.
Power module: Sealed unit
encapsulated in an engi-
neered composite resin to
eliminate all water entry.
Example: 4540 70M 277 34B LP BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
3-1/2(8.9) 12
(30.5)
18(45.7)
12-1/2(31.8)
10(254.0)
Single Tamper-Proof Retaining Screw
8-7/8(22.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 MVOLT is only available with GEB and MLEBAD options.
2 SF available with 120V, 277V or 347V and HID only.
3 DF available with 208V or 240V and HID only.
4 Only available with MVOLT voltage.
5 O-10V dimmer not included.
Border Lights
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
691www.hydrel.com | 1-800-750-9773PSG10
Border Lights STEP &
BO
RD
ER
Series Lamp type Voltage Conduit entry Options Lamped Finish
M9450 Pathway light
M9460 Marker light
Low-voltage1
50QT3
Incandescent2
75Q
Metal halide3
70M
Fluorescent3
18TRT
26TRT
32TRT
Ceramic metal halide
35CMT41
35CMT6
70CM3
70CMT41
70CMT6
100CM3
121, 9
120
208
240
277
347
MVOLT4
12B 1/2" NPT bottom
12S 1/2" NPT side
34B 3/4" NPT bottom
34S 3/4" NPT side
1B 1" NPT bottom
Internal accessories3
MILS90 Internal 90° light shield
MILS180 Internal 180° light shield
External accessories1
XLS External glare shield
2XLS Two external glare shields
Fusing
SF Single fuse5
DF Double fuse6
Ballast7
GEB Electronic ballast
MLEBAD Electronic dimming ballast8
LP Lamp installed
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
M9450 M9460
Intended Use
Pathway and marker lights
are multi-purpose units de-
signed for high-traffic areas
to be mounted in a variety of
substrates. The M9460 Series
also is suitable for drive-over
applications and has been
tested to withstand up to
22,000 lbs.
Construction
Rough-in section: Injection-
molded ABS, U.V. stabilized
impact- and corrosion-
resistant for use in all type
of environments.
Material: Top is cast aluminum.
Electrical
Conduit connection: Two
3/4" NPT bottom openings
are standard in the cast
aluminum integral junction
box. Suitable for through-
branch wiring, this box has
24' of volume.
Power module: Sealed unit
encapsulated in an engi-
neered composite resin to
eliminate all water entry.
Example: M9450 18TRT MVOLT 12B LP SND
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
3 (7.6)
2-1/4 (5.7)
16(40.6)
13(33.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
M9460
15-7/8(40.3)
4-1/8(10.5)
9(22.9)
M9450
Notes1 Only available with M9460.
2 Only available in 120V.
3 Only available with M9450.
4 MVOLT is only available with fluorescent and metal halide lamps.
5 SF available with 120V, 277V or 347V and HID only.
6 DF available with 208V or 240V and HID only.
7 Only available with HID lamps and MVOLT voltage.
8 O-10V dimmer not included.
9 Low-voltage only; transformer sold separately.
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com692
STEP
& B
OR
DER
Series Lamp type Voltage LED color Options Lamped Finish2
4595
4596
4597
4598
20QT3
3CCLED Constant current (3 LED)3
1CCLED Constant current (1 LED)3
121 WMW Warm white
CLW Cool white
JBA J-box, aluminum
JBB J-box, bronze
LPI Lamp included
LP LED installed4
VBL Black
VBZ Bronze
VGN Green
VTVG Terra verde green
VWH White
4595 4596 45974598
Intended Use
The graceful mushroom
garden light is ideal for
lighting flower beds, low
planter areas, walkways and
driveways, or any area where
an unobstructed circular field
of light is desired.
Construction
Material: Heavy-gauge cast
bronze body with spun cop-
per canopy.
Optics
Lens: Glass.
Electrical
Lamp: Quartz T3 20W max.
Socket: G4 bi-pin.
LED: Available with three LED
or one LED boards. Wattage
and lumen output will vary
with number of LEDs on
board, current supplied from
driver and LED color.
LED driver: Sold separately. See
BPTA/BPTP driver enclosure
specification sheet for options.
Example: 4595 20QT3 12 JBA LPI VBL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
13-7/8(35.2)
8(20.3)
18-7/8(47.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
4595 4596
17-5/8(44.8)
13-7/8(35.2)
8(20.3)
4597
17-3/4(45.1)
14(35.6)
14(35.6)
4598
Notes1 Low-voltage transformer sold separately.
2 Vendor-supplied finish. Consult factory for details.
3 Driver sold seperately. Do not specify voltage with LED. See spec sheet for driver options.
4 Only available with LED.
Border Lights
18-7/8(47.3)
14(35.5)
8(20.3)
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
693www.hydrel.com | 1-800-750-9773PSG10
BO
LLAR
DS
Series Height Lamp type Voltage Distribution Options
3110
3120
3130
3140
36
42
Incandescent8
100I
Fluorescent
26DTT
32TRT
42TRT
Metal halide5
50M
70M
100M
Ceramic metal halide6
35CMT4
70CMT4
35CMT6
70CMT6
High pressure sodium5
50S
70S
100S
Low pressure sodium
18L
35L
120
208
240
277
347
120/277
MVOLT1
TB
SYM Symmetric
FT Forward throw
Fusing2
SF Single fuse
DF Double fuse
Ballast
GEB Electronic ballast3
GFCI Receptacle
ELN Emergency battery backup (fluorescent lamp only), half output7
ELH Emergency battery backup (fluorescent lamp only), full output7
Lamped Finish
LPI Lamp included
LPIC Lamp included (coated)4
Finish
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
CF Custom
Optional louvers painted
_ /PL Louvers painted to match fixture
3110 3120 3130 3140
Intended Use
The 3100 Series bollard is a
low-level area lighting lu-
minaire for use in walkways,
plazas or pedestrian areas.
Construction
Material: Copper-free
aluminum A360.
Fasteners: Stainless steel.
Electrical
Lamp: Fluorescent – 42W
max. triple tube. HID – 70W
max. G12, 100W max. E17/el-
liptical. Low pressure sodium
– T16, BY22d base.
Ballast: Integrally mounted
core and coil electronic ballast
with low starting temperature.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
Example: 3130 36 100M MVOLT SYM GEB LPIC DNA
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
35-1/2(90.2)
or41-1/2(105.4)
34(86.4)
or40
(101.6)
34(86.4)
or40
(101.6)
35(88.9)
or41
(104.1)
8(20.3)
8(20.3)
9(22.9)
3110 3120 3130 3140
9(22.9)
8(20.3)
8(20.3)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 MVOLT is standard on all fluorescent lamps or metal halide lamps with
GEB electronic ballasts.
2 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V, metal halide lamps only.
3 Only available with metal halide lamps and MVOLT voltage.
4 LPIC only valid with 50M, 70M, 100M, 50S, 70S,100S,100I.
5 Will be provided with coated lamps unless LPI is chosen.
6 T4 and T6 lamps will be provided with a frosted lens.
7 Only valid with 42TRT, 32TRT and 26DTT. Must specify 120V or 277 V.
8 Incandescent lamps 120V only.
Bollards
ORDERING INFORMATION
3110 3120 3130 3140
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com694
BO
LLA
RD
S
Series Height1 Lamp type Voltage Distribution Light wash4
G2LBD
G2LBW
36
42
Metal halide2
70M
100M
Ceramic metal halide2
70CM
100CM
35CMT6
70CMT6
High pressure sodium2
50S
70S
100S
Fluorescent
26DTT
32TRT
42TRT
120
208
240
277
347
120/277
MVOLT3
TB
SYM Symmetric
FT Forward throw
Bollard front
LWF Light wash front
LEDAF LED color wash, amber front
LEDBF LED color wash, blue front
LEDRF LED color wash, red front
LEDCWF LED color wash, cool white front
LEDWWF LED color wash, warm white front
LEDRYF LED color wash, royal blue front
Light wash4 (continued) Option Lamped11 Finish
Bollard back
LWB Light wash back
LEDAB LED color wash, amber back
LEDBB LED color wash, blue back
LEDRB LED color wash, green back
LEDCWB LED color wash, cool white back
LEDWWB LED color wash, warm white back
LEDRYB LED color wash, royal blue back
Control
DCT Dual circuit5
Fusing
DF Double fuse6
SF Single fuse7
Ballast
GEB Electronic ballast8
MLEBAD Electronic dimming ballast8, 9
ELN Emergency battery backup10
LPI Lamp included
LPIC Lamp included (coated)
Finish
DBLB Designer black, textured
DSPD Dark gray, textured
DNAT Natural aluminum, textured
DWHG Designer white, textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom finish
Optional louvers finishes
_/PL Louvers to match12
G2® LOUVER BOLLARD
Intended Use
The G2® Bollard Series is
designed to work in build-
ing perimeter areas and
public spaces, completing a
wide variety of architec-
tural styles. The G2® bollard
fixture offers an unmatched
impact-resistant mounting
and leveling design, ensuring
life-long performance.
Construction
Material: Copper-free
aluminum A360.
Finish: Polyester powder
coated in a range of textured
semi-matte.
Fasteners: Stainless steel.
Optics
Light wash: Choose between
patent-pending LED color
wash or light wash. The LED
color wash option adds vi-
brant color to the bollard and
creates the opportunity for
customized applications. The
optional light wash reflector
illuminates the bollard base
by redirecting light from
main lamp source.
Electrical
Lamp: Fluorescent – 42W
max., triple tube. HID – 70W
max. G12; 100W max. E17.
Ballast: Integrally mounted
core and coil, electronic ballast
with low starting temperature.
Listings
U.L., C.U.L., IP65, suitable for
wet locations.
IES cutoff.
Example: G2LBD 36 100M MVOLT SYM LEDBF LEDCWB DCT GEB LPIC DNAT
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Light center height
41(104.1)
or35
(88.9)
8(20.3)
8(20.3)
8(20.3) 4
(10.2)
41-1/2(105.4)
or35-1/2(90.2)
36(91.4)
or30
(76.2)
9(22.9)
8(20.3) 4
(10.2)
9(22.9)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Bollard heights are nominal (shown in inches).
2 All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified.
3 MVOLT standard with fluorescent lamps and metal halide lamps with electronic ballast option.
4 Light options are mutually exclusive. Choose one per side. For single circuit wiring, LED light option not available with MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit option, secondary LED voltage required to be 120V (for primary voltages: 120V, 208V, 347V, MVOLT) or 240V (for primary voltages 240V or 277V).
5 DCT available with LED color wash option only.
6 SF available with 120V, 277V or 347V on HID fixtures only.
7 DF available with 208V or 240V on HID fixtures only.
8 Electronic ballast options available with metal halide lamps only.
9 0-10V remote analog dimmer system required (by others).
10 Available with fluorescent only.
11 LPIC recommended for E17 and ED17 lamps. Not available with fluorescent, 35CMT6 or 70CMT6 HID lamps.
12 Standard louver finish: matte black top, high-gloss white bottom unless __/PL is chosen. __/PL is not recom-mended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.
Bollards
G2LBW G2LBD
ORDERING INFORMATION
G2LBW G2LBD
PRODUCT INFORMATION
HYD
REL
695www.hydrel.com | 1-800-750-9773PSG10
AR
EA &
WA
LL MO
UN
TED
G2® XTENDPole Mounted
Series Lamp type Voltage Distribution Mounting Options
G2XD Xtend dome
G2XW Xtend wedge
Metal halide
70M
100M
150M
Ceramic metal halide
70CM
150CM
70CMT6
150CMT6
High pressure sodium
70S
150S
Fluorescent
26DTT
32TRT
42TRT
120
208
240
220
277
347
120/277
MVOLT1
TB
SR2 IES Type II
SR3 IES Type III
SR4SC IES Type IV
SR5S IES Type V
SPA Square pole mount
RPA Round pole mount
Internal accessories2
IBS Internal backlight shield
OLS Obscuring lens
Photocontrol
PE Photocell
Options (continued) Lamped Finish
Fusing
DF Double fuse3
SF Single fuse3
Ballast
GEB Electronic ballast4
MLEBAD Electronic dimming ballast4, 5
BLS Bi-level switching6
LPI Lamp included Finish
DBLB Designer black, textured
DSPD Dark gray, textured
DNAT Natural aluminum, textured
DWHG Designer white, textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom finish
Optional two-tone finishes
__/GLS Gloss finish on dome/wedge
__/POL Polished finish on dome
Intended Use
Pole-mounted dome or
wedge-shaped enclo-
sures house a range of
high-performance optical
systems for path, plaza and
parking areas.
Construction
Material: Die-cast aluminum
housing and door. Fixture
fully sealed with silicone gas-
keting. All hardware pieces
for door and mounting ac-
cessories are stainless steel.
Suitable for wet location.
Finish: Polyester powder
coated in a range of textured
or semi-matte gray tone or
earth tone colors.
Optics
Distribution: Area – IES Type
II, IES Type III, IES Type IV,
IES Type V.
Reflector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various configurations
providing optimum optical
performance. Reflectors are
interchangeable. Segmented
reflectors provide maximum
performance and uniformity.
All HID sockets are porcelain
medium-base or G12 based,
pulse rated for 4KV.
Lens: Molded crowned
tempered borosilicate.
Electrical
Lamp: HID –150W max.
CF – 42W max.
Ballast: High power factor
magnetic ballast standard.
Electronic ballast also avail-
able. Ballast rated for low
starting temperatures.
Installation
Mounting: Luminaire mounts
to 4" square or 4" round
pole, standard aluminum. A
custom 3-3/4" square design
pole with center line reveals
also available.
Listings
U.L., C.U.L., IP65, IES full cut-
off, suitable for wet locations.
Example: G2XW 150M 277 SR2 SPA OLS SF LPI DNAT
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
24(61.0)
7-3/4(19.7)
12-1/2(31.8)
3-3/4(9.5)
Front
Back
Side
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
G2XD
7-3/4(19.7)
14(35.6)
3-3/4(9.5)
Front
Back
Side
24(61.0)
G2XW Notes1 MVOLT is standard on all fluorescent or metal halide lamps with electronic ballast option.
2 Accessories are mutually exclusive. Choose one.
3 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only.
4 Electronic ballasts only are available with metal halide lamp types, 150W max.
5 0-10V dimmer required (by others).
6 BLS only available for 150S.
Pole Mounted
ORDERING INFORMATION
G2XW G2XD
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com696
AR
EA &
WA
LL M
OU
NTE
D
G2® BLOCKBuilding Mounted
Series Orientation Lamp type Voltage Distribution Lens
G2BD Block dome
G2BW Block wedge
DN Downlight
UP Uplight
Metal halide
70M
100M
150M
Ceramic metal halide
70CM
100CM
150CM
70CMT6
150CMT6
High pressure sodium
70S
150S
Fluorescent
26TRT
32TRT
42TRT
2/42TRT
120
208
240
277
347
120/277
MVOLT1
TB
VWFL Very wide fl ood2
SR2 IES Type II
SR3 IES Type III
SR4SC IES Type IV
SR5S IES Type V
FLC
FLC5
Options Lamped Finish
Internal accessories3
IBS Internal backlight shield
OLS Obscuring lens
CFAMB Color fi lter amber
CFBLU Color fi lter blue
CFGRN Color fi lter green
CFRED Color fi lter red
Photocontrol
PE Photocell
Fusing
DF Double fuse4
SF Single fuse4
Ballast
GEB Electronic ballast5
MLEBAD Electronic dimming ballast5, 6
BLS Bi-level switching7
LPI Lamp included DBLB Designer black, textured
DSPD Dark gray, textured
DNAT Natural aluminum, textured
DWHG Designer white, textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom fi nish
Intended Use
The G2® Block Series may be
applied over entries, within
entries, up or down, on all
building sides or in concert
with G2® Edge or G2® Plate
products. Lighting distributions
are symmetric or asymmetric
and project in short, medium
and long confi gurations.
Construction
Material: Die-cast aluminum
housing and door. Fixture
fully sealed with silicone gas-
keting. All hardware for door
and mounting accessories are
stainless steel. Suitable for
wet locations.
Finish: Polyester powder
coated in a range of textured
or semi-matte gray tone or
earth tone colors.
Optics
Distribution: Area – IES Type
II, IES Type III, IES Type IV,
IES Type V.
Refl ector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various confi gurations
providing optimum optical
performance. Refl ectors are
interchangeable. Refl ectors
include both segmented
and precision-formed
types to provide maximum
performance and uniformity.
All HID sockets are porcelain
medium-base or G12 based,
pulse rated for 4KV.
Lens: Molded crowned
tempered borosilicate.
Electrical
Lamp: HID – 150W max. CF –
42W max.
Ballast: Integrally mounted.
Rated for -20°C starting
temperatures.
Installation
Mounting: Surface mounted
over recessed junction box or
conduit stub-out.
Listings
U.L., C.U.L., IP65, IES full cut-
off , suitable for wet locations.
Example: G2BD DN 150M 277 SR2 FLC OLS SF LPI DNAT
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
7-3/4(19.7)
7-1/2(19.1)
5-7/8(14.9)
R 6-1/8(15.6)
12 Diameter(30.5)
7-1/4(18.4)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
G2BD
5-3/4(14.6)
8(20.3)
8(20.3)
8(20.3)
12-1/4(31.1)
12-1/4(31.1)
G2BW
Notes1 MVOLT is standard on all fl uorescent and metal halide lamps with
electronic ballast option.
2 Only available with 2/42TRT.
3 Accessories are mutually exclusive. Choose one.
4 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only.
5 Electronic ballasts only are available with metal halide (150W max), fl uorescent and MVOLT ballasts.
6 0-10V dimmer required (by others).
7 BLS only available for 150S.
Building Mounted
ORDERING INFORMATION
G2BD
G2BW
PRODUCT INFORMATION
HYD
REL
697www.hydrel.com | 1-800-750-9773PSG10
AR
EA &
WA
LL MO
UN
TED
Series Orientation Lamp type Voltage Distribution Mounting Lens
G2ED Edge dome
G2EW Edge wedge
DN Downlight
UP Uplight
Metal halide
70M
100M
150M
Ceramic metal halide
70CM
100CM
150CM
70CMT6
150CMT6
High pressure sodium
70S
150S
Fluorescent
26TRT
32TRT
42TRT
120
208
240
277
347
120/277
MVOLT1
TB
NSP Narrow spot2
SP Spot
FL Flood
WFL Wide fl ood
WWD Wall wash3
SR2 IES Type II
SR3 IES Type III
SR4SC IES Type IV
SR5S IES Type V
STD Standard for mounting on stub-out, or 3" wide or less junction box
E4S 4O or 4S junction box cover
STDDE Standard direct entry 3/4" NPT
FLC
FLC5
Options Lamped Finish
Internal accessories4
IBS Internal backlight shield
OLS Obscuring lens
CFAMB Color fi lter amber
CFBLU Color fi lter blue
CFGRN Color fi lter green
CFRED Color fi lter red
Photocontrol
PE Photocell
Fusing5
DF Double fuse
SF Single fuse
Ballast
GEB Electronic ballast6
MLEBAD Electronic dimming ballast6, 7
BLS Bi-level switching8
LPI Lamp included Finish
DBLB Designer black, textured
DSPD Dark gray, textured
DNAT Natural aluminum, textured
DWHG Designer white, textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom fi nish
Optional two-tone fi nish
__/ GLS Gloss fi nish on dome/wedge
__/ POL Polished fi nish on dome
G2® EDGEBuilding Mounted
Intended Use
G2®Edge is uniquely suited
for mounting to columns and
mullions. Choice of small-
scale dome or wedge-shaped
enclosures house a wide range
of high-performance optical
systems for safe and secure
perimeter lighting, or accent or
wallwash lighting eff ects.
Construction
Material: Die-cast aluminum
housing and door. Fixture
fully sealed with silicone gas-
keting. All hardware for door
and mounting accessories are
stainless steel. Suitable for
wet locations.
Finish: Polyester powder
coated in a range of textured
or semi-matte gray tone or
earth tone colors.
Optics
Distribution: Area – IES Type
II, IES Type III, IES Type IV,
IES Type V. Flood – Narrow
spot, spot, fl ood, wide fl ood,
wall wash.
Refl ector: High-purity anod-
ized specular, semi-specular
or patterned lighting sheet
in various confi gurations
providing optimum optical
performance. Refl ectors are
interchangeable. Refl ectors
include both segmented
and precision-formed
types to provide maximum
performance and uniformity.
All HID sockets are porcelain
medium-base or G12 based,
pulse rated for 4KV.
Lens: Molded crowned
tempered borosilicate.
Electrical
Lamp: HID – 175W max.
CF – 42W max.
Ballast: Integrally mounted.
Ballasts are 100% factory
tested, and rated for -20°C
starting temperatures.
Installation
Mounting: Surface mounted
over recessed, compact junc-
tion box or conduit stub-out.
Listings
U.L., C.U.L., IP65, IES full cut-
off , suitable for wet locations.
Example: G2EW DN 150M 277 SR2 STD FLC OLS SF LPI DNAT
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
3-3/4(9.5)
13-3/4(34.9)
13-3/4(34.9)
12-1/4(31.1)
12-1/4 Diameter(31.1)
5/8(1.6)
5-5/8(14.3)
Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.
G2ED
Notes1 MVOLT is standard on all fl uorescent and metal halide lamps with electronic ballast option.
2 NSP only available with 70CMT6 and 150CMT6.
3 WWD includes 14" extended wall mount; consult factory.
4 Accessories are mutually exclusive. Choose one.
5 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only.
6 Electronic ballasts only are available with metal halide lamps, 150W max.
7 0-10V dimmer required (by others).
8 BLS only available for 150S.
3-3/4(9.5)
14(35.6)
13-3/4(34.9)
13-3/4(34.9)
12-1/4(31.1)
5/8(1.6)
5-3/4(14.6)
G2EW
Building Mounted
ORDERING INFORMATION
G2EW
G2ED
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com698
AR
EA &
WA
LL M
OU
NTE
D
Series Lamp type Voltage Distribution Lens3
HP3
HP4
Metal halide HP3
50M
70M
100M
150M1, 2
Metal halide HP4
200M2
250M2
High pressure sodium HP3
50S
70S
High pressure sodium HP4/HP3
100S
150S1, 2
High pressure sodium HP4
250S2
120
208
240
277
347
120/277
TB
HP3
HFW High forward wall
LHW Low horizontal wall
LFW Low forward wall
LLW Low left wall
LRW Low right wall
HSC High symmetrical ceiling
HNC High narrow ceiling
HAC High asymmetrical ceiling
HP4
FLG Flat lens tempered glass
FLP Flat lens polycarbonate
Mounting Options Lamped Finish
HP3 and HP4
BMS Base mount, single
PMS Pole, single
RSB Recessed, splice box
SNB Surface, no box
SPM Pendant, single
SSB Surface, splice box
HP3
PFD Plaster frame, direct entry
PFS Plaster frame, splice box
RDE Recessed, direct entry
SDE Surface, direct entry
Fusing
SF Single fuse4
DF Double fuse5
Receptacle
PER Photocontrol receptacle1, 2, 6
Re-strike
QRS Quartz emergency re-strike
Ballast
SCWA Super constant wattage ballast7
LPI Lamp included BL Black
BZ Bronze
GN Green
GR Gray
WH White
CF Custom
Intended Use
Ideal for schools, parking
garages, walkways, airports
and stadiums.
Construction
Housing: One-piece
aluminum die-casting having
knockouts for 4-0 box entry or
independent surface mount-
ing integrated. Accessories
include a cast aluminum
splice box for direct conduit
entry. This unit also is suitable
for pole-, pendant- or base-
mounted applications.
Optics
HP3 lens: Molded from clear,
UV stabilized polycarbonate for
maximum impact resistance.
HP4 lens: Unit is provided
with a vandal-resistant pris-
matic lens door. This clear
polycarbonate lens creates
a 180° lateral spread. Flat
polycarbonate or tempered
glass lens also available.
HP3 distribution: See order-
ing guide.
HP4 distribution: High-
performance three-piece
specular reflector assembly is
adjustable through a 70° to 85°
sharp cutoff range. IES Type III
and IV distributions are achiev-
able to 180° lateral spread.
The lens door seals with
silicone gaskets providing
bug and water tightness. The
door is affixed to the housing
with stainless steel tamper-
proof fasteners.
Electrical
Lamp: Metal halide or high
pressure sodium.
HP3: 150W max. with
medium screw base.
HP4: 250W max. with mogul
screw base.
Ballast: Magnetic, high power
factor; minimum starting
temperature is -20°F (-29°C).
Installation
Mounting: To surface-mount
over recessed 4-0 box, or
with recessed post, base or
direct conduit. Also available
as pendant mount.
Listings
U.L., CSA, suitable for wet
locations.
Example: HP3 150M 120 HFW SDE SF LPI BL
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
15-5/8(39.7)
16-3/8(41.6)
Recessed4-0 box (by others)
11-3/8(28.9)
6-7/8(17.5)
HP4
2-1/4 (5.7)
7 (17.8)
Two 1/4” mounting holes for wall anchor bolts (bolts by others)
Cast knockouts for 4-0 box mounting
HP3
11-3/8(28.9)
12-3/8(31.4)
Recessed4-0 box (by others)
9(22.9)
6-1/4(15.9)
HP3
Cast knockouts for4-0 box mountings
Four 1/4” mounting holes for wall anchor bolts(bolts by others)
3-5/8 (9.2)
12 (30.5)
HP4
HP3HP4
Notes1 Not available with RDE mounting.
2 Not available with RSB mounting.
3 150W maximum; reflector is not adjustable with this lens.
4 SF only is available with 120V, 277V or 347V on MH only.
5 DF only is available with 208V or 240V on MH only.
6 NEMA twist-lock receptacle only. Photocontrol by others.
7 Required on 200M and 250M metal halide lamps.
Building Mounted
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
699www.hydrel.com | 1-800-750-9773PSG10
AR
EA &
WA
LL MO
UN
TED
4760T5/T5HO Linear FluorescentCanopy and Parking Garage
Series Lamp type Voltage Distribution Mounting
4760 2/28T5 Two T5, miniature bi-pin
2/54T5HO Two T5HO, miniature bi-pin
MVOLT
1204
2774
347
CNP Canopy
VCNP Volumetric canopy
GRG Garage
CM Ceiling mount
PDMD_ Pendant mount damp location; specify length 6-48" in 6" increments1
PDMW_ Pendant mount wet location; specify length 6-48" in 6" increments1
Options Lamped Finish
External accessories
HS House side shield
FSS Flush source shield
Hardware option
TPH Tamper-proof hardware
Ballast
ELN Emergency battery back-up5
GEB95S 0.95 ballast factor, step dimming3
Polarpack®
PLPKX Polarpack® cold-weather start option 120V
PLPKY Polarpack® cold-weather start option 347V6
PLPKZ Polarpack® cold-weather start option 208-277V
Mounting option
EQSM Earthquake seismic mount2
LPI 3000K lamp included
LP35K 3500K lamp included
LP41K 4100K lamp included
DWH Gloss white (standard)
BL Black
BZ Bronze
WH White
DDB Dark bronze
DNA Natural aluminum
GR Gray
SND Sand
STG Steel gray
CF Custom finish
Intended Use
The Hydrel 4760 Series of
linear fluorescent lighting
fixtures bring the high
performance of T5 and T5HO
lamps to the outdoors. With
the 4760 Series patent-pend-
ing Polarpack® cold-weather
option, full light output is
now a reality to 0°F (-18°C).
The T5 and T5HO lamp perfor-
mance, high-output optical
system, and simple architec-
tural lines make this fixture
series ideal for spreading
soft, even illumination under
canopies, covered walkways
and garages. The 4760 Series
linear fluorescent offers a
high- efficiency fluorescent
option to the outdoor light-
ing market.
Construction
Material: Extruded 6063-T4
aluminum with die-cast
A360 aluminum end caps. All
fasteners are stainless steel.
Tamper-proof hardware.
Optics
Distribution: CNP – Canopy.
GRG – Garage. VCNP – Volu-
metric Canopy.
Lens: Curved high-strength
optical-grade clear acrylic.
Internal diffusion film options
available. House-side shield,
flush source shield.
Electrical
Lamp: Fluorescent – 54W
max. T5 or T5HO (two lamps).
Socket: G5 miniature bi-pin.
Voltage: Multi-volt (120 -
277V 50/60 Hz), 347V.
Ballast: Integral electronic
multi-volt, thermally pro-
tected, resetting, class P,
HPF, A+ sound-rated, -20°F
(-29°C) minimum starting
temperature. Polarpack®
cold- weather start options
and emergency battery back-
up options are available.
Installation
Ceiling-mounted over
recessed box conduit stub-
out or pendant-mounted
is not end-to-end. Various
pendant lengths.
Listings
U.L., CUL
Example: 4760 2/54T5HO MVOLT GRG CM LPI DWH
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
4(10.2)
7-1/2(19.1)
49-1/2(125.7)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 12" standard length if not specified.
2 Option required for PDMD and PDMW installations located in areas subject to seismic activity. Not available with CM mount.
3 Only available for 2/28T5 lamp type.
4 Only available if ELN is chosen.
5 Must choose 120V or 277V. MVOLT and 347V not available.
6 Not available with ELN or MVOLT.
Site & Area Lighting
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com700
UN
DER
WAT
ER
4426 BMLED Base Mount - MonochromaticLED Base Mount - Dynamic RGB
Series Material LED type LED color Voltage Distribution Lens Mounting
4426 B Bronze
SWB Saltwater bronze
60LED 60W CLW Cool white
WMW Warm white
AMB Amber
BLU Blue
GRN Green
RBL Royal blue
RED Red
RGB Mixing
120 SP Spot
MFL Medium flood
WFL Wide flood
FLC Flat lens clear BM Base mount
Control Communication to fixture Channel Cord set length Lamped
RGB LED only
3DMX 3-channel DMX 512
4DMX 4-channel DMX 512
RGB LED only
DDX Direct DMX
RGB LED only
ST_ Static1
SQ_ Sequential (specify starting channel)2
CCHAN Custom channels3
CSL_ 10'-120' of cord available in 5' increments LP Lamp installed
Intended Use
The 4426 base mount is
designed for use in fountains,
reflecting pools and for
illuminating waterfalls.
Monochromatic: A non-dim-
ming, one-color light output
available in cool white, warm
white, amber, blue, cyan,
green, royal blue and red
monochromatic colors. The
system shall be composed of
two components: 1) LED array
board and 2) driver. The LED
driver powers via constant
current. With a constant
current driver, LED lumen
output does not change with
temperature variations.
Dynamic RGB: This unit uses
a red, green and blue (RGB)
underwater color-balanced
LED array to create DMX-
controlled color changing
lighting effects. Color
control is achieved through
four channels per fixture,
standard DMX512 hardware,
at a maximum of 44 frames
per second. All channels
have logarithmic power for
finer color and intensity
control. The fourth channel,
intensity, allows the user to
vary brightness without af-
fecting the color. The integral
power supply and DMX
control modules are enclosed
in an attached sealed bronze
combination box. The pro-
prietary DMX control module
senses the LED temperature
and adjusts the LED power
accordingly to yield a lamp
life of up to 50,000 hours
of operation. This lamp life
exceeds any other fixture
designed for this use. For
power and signal hook-up,
the integral combination box
includes a minimum of 10'
of submersible rated power
cable and a minimum of 10'
of submersible rated DMX
signal cable.
Construction
Fixture housing, rock guard
and base: Heavy wall cast
bronze construction. Natural
cast bronze finish.
Gasket: Single-piece molded
U-shaped silicone gasket.
Fasteners: Stainless steel.
Cord (monochromatic):
Minimum of 10' of #16/3ST
submersible rated cord for
standard 120VAC line. Cord en-
trance is epoxy encapsulated.
Cord length must be specified.
Cord (dynamic RGB): Minimum
of 10' of submersible rated
data cord for DMX512 signal.
Optics
Lens: Clear flat tempered
borosilicate.
Electrical
Voltage: 120VAC 60HZ only.
LED (monochromatic): 60W
monochromatic LED (LED
board included).
LED (dynamic RGB): 60W RGB
LED array. (LED board included.
Control: Standard DMX512.
Three channels per fixture: red,
blue, green or four channels
per fixture: red, green, blue
and intensity.
Low-water protection.
Monochromatic: Temper-
ature-sensing, low-water
cutoff standard.
Dynamic RGB: Temperature
sensing circuit reduces power
to LEDs to prevent damage.
Listings
UL Listed.
Factory leak tested: Fixtures
are tested at 10 PSI (0.70kg/
cm2) internal pressure while
totally submerged in water.
Example: 4426 B 60LED CLW 120 SP FLC BM CSL50
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
7(17.8) 5-7/8
(14.9)
7-1/2(19.0)
15-1/2(39.4)
7-1/2(19.0)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 Static channels – all fixtures will be programmed with the same
set of numbers, specify starting number.
2 Static channels – all fixtures will be programmed with the same set of numbers, specify starting number.
3 Consult factory.
Fountain & Reflecting Pool Fixtures
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
701www.hydrel.com | 1-800-750-9773PSG10
UN
DER
WATER
Fountain & Reflecting Pool Fixtures
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Series Material LED type LED color Voltage Distribution Lens Mounting Control
4426 B Bronze
SWB Saltwater bronze
SS Stainless steel
60LED 60W
96LED 96W
RGB Mixing
CLW Cool white
WWW Warm white
AMB Amber
BLU Blue
GRN Green
RBL Royal blue
RED Red
120 WFL Wide flood CLS Convex lens swim NM Niche mount RGB LED only
3DMX 3-channel DMX 512
4DMX 4-channel DMX 512
Communication to fixture Channel Cord set length Lamped
RGB LED only
DDX Direct DMX
RGB LED only
ST_ Static1
SQ_ Sequential (specify starting channel)2
CCHAN Custom channels3
CSL_ 35'-120' of cord available in 5' increments LP Lamp included
4426 NMLED Niche Mount - Monochromatic
LED Niche Mount - Dynamic RGB
Intended Use
The 4426 niche mount is
designed for use in fountains,
reflecting pools and for
illuminating waterfalls.
Monochromatic: These
units offer cool white, warm
white, amber, blue, cyan,
green, royal blue and red
monochromatic colors. The
system shall be composed of
two components: 1) LED array
board and 2) driver. The LED
driver powers via constant
current. With a constant
current driver, LED lumen
output does not change with
temperature variations. Hy-
drel's monochromatic system
is a non-dimming, one-color
light output.
Dynamic RGB: This unit uses
a red, green and blue (RGB)
underwater color-balanced
LED array to create DMX-
controlled color-changing
lighting effects. Color
control is achieved through
four channels per fixture,
standard DMX512 hardware,
standard DMX512 hardware,
at a maximum of 44 frames
per second. All channels
have logarithmic power for
finer color and intensity
control. The fourth channel,
intensity, allows the user to
vary brightness without af-
fecting the color. The integral
power supply and DMX
control modules are enclosed
in an attached sealed bronze
combination box. The pro-
prietary DMX control module
senses the LED temperature
and adjusts the LED power
accordingly to yield a lamp
life of up to 50,000 hours
of operation. This lamp life
exceeds any other fixture
designed for this use. For
power and signal hook-up,
the integral combination box
includes a minimum of 10'
of submersible rated power
cable and a minimum of 10'
of submersible rated DMX
signal cable.
Construction
Fixture housing,rock guard
and base: Heavy wall cast
bronze construction. Natural
cast bronze finish.
Gasket: Single-piece molded
U-shaped silicone gasket.
Fasteners: Stainless steel.
Cord (monochromatic):
Minimum of 10' of #16/3ST
submersible rated cord for
standard 120VAC line. Cord en-
trance is epoxy encapsulated.
Cord length must be specified.
Cord (dynamic RGB):
Minimum of 10' of #16/3ST
submersible rated cord for
standard 120VAC line, mini-
mum of 25' of submersible
rated data cord for DMX512
signal. Cord entrance is epoxy
encapsulated. Cord length
must be specified.
Optics
Lens: Clear flat tempered
borosilicate.
Electrical
Voltage: 120VAC 60HZ only.
LED type (monochromatic):
60W monochromatic LED.
(LED board included.)
LED type (dynamic): 60W RGB
LED array. (LED board included.)
Control (dynamic RGB):
Standard DMX512. Three
channels per fixture: red,
blue, green, or four channels
per fixture: red, green, blue
and intensity.
Communication to fixture
(dynamic RGB): DMX512 direct.
Low-water protection
(monochromatic): Temper-
ature-sensing low-water
cutoff standard.
Lower-water protection
(dynamic RGB): Temperature-
sensing circuit reduces power
to LEDs to prevent damage.
Listings
UL Listed.
Factory leak tested: Fixtures
are tested at 10 PSI (0.70kg/
cm2) internal pressure while
totally submerged in water.
Example: 4426 B 60LED RGB 120 WFL CLS NM 4DMX DDX ST3 CSL50
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 All fixtures will be programmed with the same set of numbers,
specify starting numbers.
2 Fixtures will be programmed sequentially starting with the number provided by customer.
3 Consult factory.
11-1/4(28.6)
8-7/8(22.5)
2(5.1)
1-3/8(3.5)
4-1/2(11.3)
7-1/2(19.1)
1(2.5)
9(22.9)1-3/8
(3.5)
NicheDirectDMX
Power
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com702
UN
DER
WAT
ER
Series Lamp type Voltage Distribution Lens Mounting Mounting accessories6 Cord set length Lamped Options
4424
4427
Incandescent
P64500I1
P641000I1
P56300I9
P56500I9
Low-voltage9
P56240ILV
P56300ILV3
122
120
MFL Medium flood
NSP Narrow spot
WFL Wide flood
CLC Convex lens clear4
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
BM Base mount
YM Yoke mount5
ALB Adjustable locking base
RSR_ 4"-24" riser stem available in 2" increments7
CSL_ 10'-120' of cord available in 5' increments8
LPI Lamp included
CSA Meets Canadian Standards
PRODUCT INFORMATION
4424 BM/YM 4427 BM/YM
Intended Use
Lighting for fountains and
reflecting pools – base/
yoke mount.
Construction
Heavy-duty cast bronze.
Example: 4424 P56500I 120 MFL CLC YM CSL120 LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Series Lamp type Voltage Distribution3 Lens Mounting Cord set length Lamped Options
4800 Incandescent
100Q
150Q
Low-voltage1
M75
122
120
FL Flood CLC Convex lens clear4
CLF Convex lens frosted
CLA Convex lens amber
CLB Convex lens blue5
CLG Convex lens green5
CLR Convex lens red
BM Base mount
YM Yoke mount6
CSL_ 10'-120' of cord available in 5' increments7 LP Lamp installed CSA Meets Canadian Standards
PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures
4800 BM/YMIntended Use
Lighting for fountains and
reflecting pools – base/
yoke mount.
Construction
Heavy-duty cast bronze.
Example: 4800 100Q 120 FL CLC BM CSL90 LP
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 Other wattages available by request.
2 Transformer sold separately.
3 Distribution included on 12V only.
4 CLC is the default.
5 CLB and CLG not available with 150Q.
6 Consult www.hydrel.com for yoke mount dimensions.
7 CSL50 max. cord length for 12V.
11-3/4(29.8)
11(27.9)
11(27.9)
8(20.3) 10
(25.4
12(30.5)
8(20.3)
8(20.3)
4-1/4(10.8)
4-1/2(11.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
12(30.5)
10-1/2(26.7)
10-3/4(27.3)
6-3/4(17.1)
4424 4427
Notes 1 Available with 4427 only.2 Transformer sold separately.
3 Available in WFL only.
4 CLC is the default.
5 Consult www.hydrel.com for yoke mount dimensions.
6 Mounting accessories with ALB only.
7 RSR6 – default with ALB.
8 CSL50 max. cord length for 12V.
9 Available with 4424 only.
Fountain & Reflecting Pool Fixtures
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
703www.hydrel.com | 1-800-750-9773PSG10
UN
DER
WATER
Fountain & Reflecting Pool Fixtures
Series Lamp type Voltage Distribution Lens4 Mounting Conduit entry Options5 Cord set length7 Lamped Options
4415
4424
Incandescent 4415
1161
200QT3
300QT3
Incandescent 4424
P56300I
P56500I1
Low-voltage 4415
3/M50
3/M75
Low-voltage 4424
P56240ILV
P56300ILV1
122
120
4424
NSP Narrow spot
MFL Medium flood
WFL Wide flood
4415
FL Flood3
4424
CLC Convex lens clear4
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
NM Niche mount
4424
34B 3/4" NPT bottom
4415
34S 3/4" NPT side
RG Rock guard
LLV Louver6
CSL_ 35'-120' of cord available in 5' increments
LPI Lamp included
4424
CSA CSA Certified
PRODUCT INFORMATION
Intended Use
Lighting for fountains and
reflecting pools – niche mount.
Series Door Material Lamp type Voltage Distribution3 Lens MountingConduit entry Options Cord set length Lamped Options
4800 RD Round, adjustable
SQ Square, fixed
B Bronze
SS Stainless steel7
Incandescent
100Q
150Q
Low-voltage
M751
122
120
FL Flood CLC Convex lens clear4
CLF Convex lens frosted
CLA Convex lens amber
CLB Convex lens blue5
CLG Convex lens green5
CLR Convex lens red
NM Niche mount
3445B 3/4" at 45°
RG Rock guard6, 7
CSL_ 35'-120' of cord available in 5' increments8
LPI Lamp included
CSA Meets Canadian Standards
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Notes1 4424: P56300ILV (12V) and P565001
(120V) default.
2 Transformer sold separately.
3 Other distributions available on 3/M50 and 3/M75 only.
4 CLC – default.
5 Required for floor-mounted fixtures.
6 Available with 4415 only.
7 CL50 max. cord length for 12V fixtures.
PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures
4800 NMIntended Use
Lighting for fountains and
reflecting pools – niche mount.
Notes1 Other wattage available by request.
2 Transformer sold separately.
3 Distribution included on 12V only.
4 CLC is the default.
5 Not available with 150Q.
6 Required for floor-mounted fixtures.
7 SS material not available with rock guard.
8 CSL50 max. cord length for 12V.
5-1/2(14.0)
5-1/2(14.0)
6-5/8(16.8)
6-1/8(15.6)
4-3/4(12.1)
Example: 4415 3/M50 12 FL NM 34B RG CSL50 LPI
Example: 4800 RD SS 100Q 120 FL CLC NM 3445B CSL75 LP
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
11(27.9)
5-3/8(13.7)2-7/8
(7.3)
6-7/8(17.5)
1-1/4(3.2)
7-3/4(19.7)
13(33.0)
10-7/8(27.6)
5/8(1.6)
Louver
Rock guard
4415
4424
4415 NM 4424 NM
4415 NM
ORDERING INFORMATION
ORDERING INFORMATION
4424 NM
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com704
UN
DER
WAT
ER
SeriesLamp type Voltage Distribution Lens Mounting Cord set length Lamped Options
4413 100Q
150Q
200Q
250Q
300QT4
400QT4
500Q
120 SP Spot
FL Flood
FLC Flat lens clear
FLAM Flat lens amber
FLG Flat lens green
FLR Flat lens red
BM Base mount
CSL_ 10'-120' of cord available in 5' increments
LPI Lamp included
CSA Meets Canadian Standards
Series Lamp type Voltage Lens Mounting Options Cord set length Lamped
4409 75QT3
100QT3
121
120
FLC Flat lens clear
BM Base mount
DCFAMB Color filter amber
DCFBLU Color filter blue
DCFGRN Color filter green
DCFRED Color filter red
CSL_ 10'-120' of cord available in 5' increments2
LP Lamp included
4409 BMIntended Use
Lighting for fountains and
reflecting pools – base/
yoke mount.
Construction
Heavy-duty cast bronze.
Example: 4409 100QT3 120 FLC BM CSL120 LP
Series Lamp type Voltage Distribution2 MountingMounting accessories3 Cord set length Lamped Options
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
6(152)
6-1/4(15.9)
4-3/4(12.1)
4-1/2(11.4)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures
4413 BM Intended Use
Lighting for fountains and
reflecting pools – base/
yoke mount.
Construction
Heavy-duty cast bronze.
Example: 4413 500Q 120 FL FLC BM CSL80 LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
3/4 Typ.(1.9)
8-7/8(22.4)
6-5/8 Max.(16.8)
7-1/2(19.1)
4-1/4 Min.(10.8)
Fixture is height adjustable
PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures
4415 BM/YMIntended Use
Lighting for fountains and
reflecting pools – base/
yoke mount.
Construction
Heavy-duty cast bronze.
Example: 4415 3/M50 12 FL ALB RSR12 CSL40 LPI
5-3/8(13.7)
1(2.5) 10
(25.4)10
(25.4)
3-1/4(8.3)
4-5/8(11.6)
10-1/2(26.7)
9-1/4(23.5)
5-1/2(14.0)
Notes1 Transformer sold separately.
2 Other distributions available for the 3/M50 and the 3/M75 only.
3 Available with ALB mount only.
4 RSR6 default with ALB.
5 50' max cord length for 12V fixtures.
6 Available in 12V only.
7 Consult www.hydrel.com for yoke mount dimensions.
4415 Incandescent
116I
Quartz
200Q
300Q
Low-voltage
3/M502, 6
3/M752, 6
121
120
FL Flood BM Base mount
YM Yoke mount7
ALB Adjus- table locking base
RSR_ 4"-24" riser stem available in 2" incre-ments4
CSL_ 10'-120' of cord available in 5' incre-ments5
LPI Lamp included
CSA Meets Canadian Standards
Notes1 Transformer sold separately.
2 50' max cord length for 12V fixtures.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Fountain & Reflecting Pool Fixtures
ORDERING INFORMATION
ORDERING INFORMATION
ORDERING INFORMATION
PRODUCT INFORMATION
HYD
REL
705www.hydrel.com | 1-800-750-9773PSG10
UN
DER
WATER
Series Material Lamp type Voltage Distribution Lens MountingConduit entry Cord set length Application Lamped Options
4425
4427
B Bronze
SS Stainless steel bezel
Low-voltage1, 2
P56300ILV5
Incandescent
P56500I2
P64500I3
P641000I3
121, 2
120
MFL Medium flood
NSP Narrow spot
WFL Wide flood
CLS Convex lens swim
CLSA Convex lens swim amber
CLSB Convex lens swim blue
CLSG Convex lens swim green
CLSR Convex lens swim red
NM Niche mount
120V only
34B 3/4" NPT bottom
12V only2
1B 1" NPT bottom
CSL_ 35'-120' of cord available in 5' increments4
SWM Swimming pool
LPI Lamp included
CSA Meets Canadian Standards
4425 NM SWM 4427 NM SWM
Intended Use
Swimming pool fixtures.
Maximum wattages of each
lamp type listed. Lower
wattages available; consult
www.hydrel.com for more
information.
ORDERING INFORMATION Example: 4425 B P56300ILV 12 WFL CLS NM 1B CSL50 SWM LPI
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Series Door Material Lamp type Voltage Distribution Lens Mounting Conduit entry Cord set length4 Application Lamped Options
4800 RD Round
SQ Square
B Bronze
SS Stainless steel bezel
Low-voltage1
M75
Incandescent
100Q
150Q
121
120
FL Flood3 CLS Convex lens swim
CLA Convex lens amber
CLB Convex lens blue
CLG Convex lens green
CLR Convex lens red
CLC Convex lens clear
NM Niche mount
3445B 3/4" NPT at 45°
CSL_ 35'-120' of cord available in 5' incre-ments2
SWM Swimming pool
LP Lamp installed
CSA Meets Canadian Standards
4800 NM SWMIntended Use
Swimming pool fixture.
ORDERING INFORMATION Example: 4800 RD B M75 12 FL CL NM 3445B CSL50 SWM LP
7-3/4(19.5)
13(33.0)
10-7/8(27.6)
5/8(1.6)
7-3/4(19.5)
10-7/8(27.6)
5/8(1.6)
13(33.0)
5-1/2(14.0)
5-1/2(14.0)
6-5/8(16.8)
6-1/8(15.6)
4-3/4(12.1)
ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
44274425
Notes1 12V only; transformer sold separately.
2 Only available with 4425.
3 Only available with 4427.
4 50' maximum cord length on 12V fixtures.
5 P56300ILV only available with WFL distribution.
Notes1 12V only; transformer sold separately.
2 50' maximum cord length on 12V fixtures.
3 Only available with M75 lamp; otherwise leave blank.
PRODUCT INFORMATION Swimming Pool Fixtures
PRODUCT INFORMATION Swimming Pool Fixtures
PRODUCT INFORMATION
HYD
REL
PSG101-800-750-9773 | www.hydrel.com706
UN
DER
WAT
ER
Complementing their underwater lights, is Hydrel’s full line of accessories – manufactured to the
high standards required for underwater fountain and pool products.
Colored LensesGreen, red, amber and blue available for most fixtures.
Potting CompoundPC21 is a re-enterable potting compound which pours yellow and cures transparent so connections
are easily located. It meets NEC requirements for potting underwater junction boxes.
Low-Voltage Transformers
Low-voltage lighting fixtures require that the line voltages be stepped down. This is normally accomplished
with a transformer or a series of transformers located in the pool equipment area. Hydrel offers such parts in
sizes from 100W to 1000W.
Notes Special consideration must be given to the length of cords used with low-voltage underwater fixtures.
6-1/4(15.9)
6-1/4(15.9)
11(29.2)
T1904
Cord SealsConstructed of brass with neoprene grommets, these seals are for use in underwater junction boxes
for fixture cord entrance seals.
B
ACATALOG NUMBER
NPT CORD A B
CS14302 1/2 18-3 7/8 (2.2) 1-1/2 (3.8)
CS143022 1/2 16-3* (3 x 1.5) 7/8 (2.2) 1-1/2 (3.8)
CS14304 3/4 18-3 1-1/4 (3.2) 1-3/4 (4.4)CS14303 3/4 14-3 (2 x 4) 1-1/4 (3.2) 1-3/4 (4.4)CS143032 3/4 12-3 1-1/4 (3.2) 1-3/4 (4.4)CS143033 3/4 10-3 (2 x 6) 1-1/4 (3.2) 1-3/4 (4.4)
B
A
C
SR Strain ReliefA threaded cord grip that prevents cord movement from pulling on connections. Used where J-box is
mounted above the floor or deck.
CATALOG NUMBER
(NPT) CORD A B
SR50 1/2 16-3* 7/8 (2.2) 1-3/8 (3.5)SR754 3/4 18-3 1-1/4 (3.2 1-1/2 (3.8)
SR75 3/4 10-3 1-1/4 (3.2 1-1/2 (3.8)
Notes
* 18-2/16-1 cord fits SR50 and CS143022 parts.
USR Strain Relief 1
Universal strain relief (USR). Strain reliefs, used where J-boxes are mounted flush to floor or deck.
Specify for the total number of fixtures to be mounted.
ALB - Adjustable Locking BaseThis fountain lighting economy base allows for variable fixture height and includes Hydrel’s
pro-focus aim-set feature. Multiple riser heights available.
A
C
StandardStem Length6” (15.2)
B
12(30.5)
CATALOG NUMBER
A B C
ALB15 10-1/2 (26.7) 12-5/8 (32.1) 8-5/8 (21.9)ALB21 7-7/8 (20.0) 11 (27.9) 7 (17.8)ALB22 7-11/16 (19.5) 12 (30.5) 8 (20.3)ALB24 7-11/16 (19.5) 12 (30.5) 8 (20.3)ALB27 7-11/16 (19.5) 12 (30.5) 8 (20.3)
Accessories
Notes1 Specify USR strain reliefs for the total number of fixtures. USR sold separately.
Dimensions are shown in inches (centimeters) unless otherwise noted.
CATALOG NUMBER
DESCRIPTION
PC21 35 CU. IN.PC2112 20 CU. IN.
CATALOG NUMBER
DESCRIPTION
T1901 100W transformerT1903 300W transformerT1904 1000W transformerT1905 500W transformer
MISCELLANEOUS
5-1/8(13.0)
9-1/2(24.1)
4-1/2(11.4)
T1903 and T1905
PRODUCT INFORMATION
HYD
REL
707www.hydrel.com | 1-800-750-9773PSG10
UN
DER
WATER
Outside dimensions:
4-1/2” (11.5) dia. x 3-5/8”
(9.3) deep
Inside dimensions:
2-3/4” (7.1) dia. x 2-1/4” (5.8) deep
(10 cubic inches)
JB1711
JB 1708
JB1710 JB1713
BA
DC
FME
K L
H J
G
Ground screws E F
G H
J
L
N
K
M
P
R S T
pool floor
internalcord sealincluded to fixture
BA
Outside dimensions:
7-5/8” (19.4) x 6-1/2” (16.5) x 4-7/16”
(11.3) deep
Inside dimensions:
5-3/16” (13.2) x 4-1/8” (10.5) x 3-11/16”
(9.4) deep (62 cubic inches)
Outside dimensions:
7-5/8” (19.4) sq. x 4-3/4” (12.1) deep
Inside dimensions:
6” (15.3) sq. x 4” (10.2) deep
(144 cubic inches)
Bottom may have maximum three
1” (2.5) hubs or two 1-1/4” (3.2) hubs
or one 2” (5.1) hub.
Outside dimensions:
7-3/8” (18.8) x 5-3/8” (13.7) x 2-1/2”
(6.4) deep
Inside dimensions:
6” (15.3) x 4” (10.2) x 2” (5.1) deep
(48 cubic inches)
Bottom may have single 1” (2.5) or
1-1/4” (3.2) hub.
A C
DB JK
L
G H
E F
Hydrel underwater junction boxes are designed for the connection of supply cords from underwater foun-
tain fixtures and service conduits. They feature heavy cast bronze construction, neoprene gaskets, internal
ground lugs and stainless steel hardware. All hubs may be tapped either 1/2” NPT or 3/4” NPT with other
drillings available upon request. When ordering, specify the catalog number, hub location and hub size. Letters
around perimeter indicate side drill locations. Letters within box indicate bottom drill locations.
Outside dimensions:
4-3/4” (12.1) dia. x 3” (7.6) deep
Inside dimensions:
3-1/2” (8.9) dia. x 2” (5.1) deep
(25 cubic inches)
Cover may have single 1/2” (1.3) or 3/4”
(1.9) hub.
Bottom may also have single 1” (2.5) hub.
JB1701
Outside dimensions:
3-3/8” (8.6) x 4-3/8” (11.1)
x 2-1/2” (6.4) deep
Inside dimensions:
3” (7.6) x 2” (5.1) x 2” (5.1) deep
(12 cubic inches)
JB1703
Outside dimensions:
4-3/4” (12.1) sq. x 2-1/2” (6.4) deep
Inside dimensions:
3” (7.6) sq. x 2” (5.1) deep
(18 cubic inches)
JB1705
D A
C B
E
F
G
H KL
J
cover Gbottom center H
A C
D B
R
S
BPA
A B
D
C
Outside dimensions:
5-3/8” (13.7) sq. x 2-1/2” (6.4) deep
Inside dimensions:
4” (10.2) sq. x 2” (5.1) deep
(32 cubic inches)
JB1706
Outside dimensions:
7-5/8” (19.4) x 6-1/2” (16.5) x
4-7/16” (11.3) deep
Inside dimensions:
5-3/16” (13.2) x 4-1/8” (10.5) x
3-11/16” (9.4) deep
(62 cubic inches)
g ro u n ds c re w s
BA
DC
FME
K L
H J
G
Accessories
JUNCTION BOXES
Notes
1 Specifically designed for deck or
remote wall mountings, this deck
junction box meets all the require-
ments of the NEC. It features cast
bronze construction, neoprene gaskets,
one hub at each end and two hubs on
one side. The entire bottom and one
side of the box are suitable for drilling.
Fasteners are stainless steel.
Dimensions are shown in inches (centimeters) unless otherwise noted.
JB1719(Deck-Mounted)1
PRODUCT INFORMATION