Clipsal titanium® Fibre Management Tray
Clipsal titanium® Fibre Adaptor Panels
Clipsal titanium® Fibre Enclosures
Clipsal titanium® Fibre Patch Cords
Clipsal titanium® Fibre Pigtails
Indoor/Outdoor Optical Fibre Cable
Underground Optical Fibre Cables
OPTICAL FIBRE
SOLUTION
134
Clipsal titanium® Fibre Management Tray - Sliding
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE TRAY
The Clipsal titanium® Fibre Management Enclosure (sliding) is a superior and compact fi bre termination solution. It
provides a rack/cabinet mountable solution with a provision to splice up to 48 fi bres to 48 pigtails.
Installed with a pair of cable radius guides, this enclosure can also facilitate a maximum of 24 fi bre patching
applications. This powder coated steel enclosure comes with a tinted removable Plexiglass cover for ease of
installation, inspection and testing. Innovated design such as slide in/out cable entry provides additional fl exibility
during installation, movement or changes in the future.
Designed with multiple applications in mind, the Clipsal titanium® Fibre Management Enclosure can accommodate
diff erent types of modular adapter panels and splice trays to give outstanding performance and functionality.
T E C H N I C A L S P E C I F I C A T I O N S
Material Powder coated mild steel
AccommodationPorts Up to 24 x ST Connectors
Up to 24 x SC Connectors
Up to 48 LC Connectors
Cable Termination Direct termination
Options Mechanical and fusion splicing
D I M E N S I O N S
Product A B C
TFM1U 482mm 480mm 44mm
P R O D U C T F E A T U R E S
19” front rack mounting enclosures provides patching • and fi bre slack storage capability, conduit or standard tube interfacing.
Splice tray included.•
Accommodates up to three connector panels.•
Access connector panel with front quick release • latch cover.
Nylon cable radius guides and centre strength • member clamps.
Cable fi bre track cover provides additional protection • and a clean outlook.
Clear, easy access slide-out and removeable • Plexiglass cover.
Accommodates both single-mode and multi-• mode fi bre.
Additional rear mount ears (a set of two) for • cabinet mounting.
Rugged steel construction in graphite fi nish.•
Slide in cable entry panel with 2 x 25mm • diameter holes.
C U S T O M E R B E N E F I T S
Provide patching and fi bre slack storage capability with • technicians and users in mind.
The technician’s side has facilities for securing the cable • storing fi bre slack and arranging the terminated fi bres.
The user’s side has similar features for the • management of fi bre optic patch cord.
66mm deep front cable panel for patch cord • management and protection.
Slide-out medium density optical fi bre management • enclosure for optimum access; providing easy installation, inspection and testing.
Slide-in cable entry panel with 2 x 25mm diameter • holes allow fl exible conduit or standard tube interfacing during installation.
Nylon cable radius guide within the enclosure to • accommodate excess fi bres while maintaining fi bre bend radius.
Cable fi bre track cover to give additional protection and • clean outlook.
CATALOGUE NUMBER DESCRIPTION
TFM1U 1RU 24-Port SC Fibre Sliding Enclosure, Unloaded
TFM1U
A
B
C
135
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE TRAY
Clipsal titanium® Fibre Management Tray - Fixed
The Clipsal titanium® Fibre Management Enclosure (fi xed) is a superior and compact fi bre termination solution. It
provides a rack/cabinet mountable solution with a provision to splice up to 48 fi bres to 48 pigtails.
Installed with a pair of cable radius guides, this enclosure can also facilitate a maximum of 24 fi bre patching
applications. This powder coated steel enclosure comes with a tinted removable Plexiglass cover for ease of
installation, inspection and testing. Innovated design such as slide in/out cable entry provides additional fl exibility
during installation, movement or changes in the future.
Designed with multiple applications in mind, the Clipsal titanium® Fibre Management Enclosure can
accommodate diff erent types of modular adapter panels and splice trays (optional) to give outstanding
performance and functionality.
T E C H N I C A L S P E C I F I C A T I O N S
Material Powder coated mild steel
AccommodationPorts Up to 24 x ST Connectors
Up to 24 x SC Connectors
Up to 48 LC Connectors
Cable Termination Direct termination
Options Mechanical and fusion splicing
D I M E N S I O N S
Product A B C
TFM1UF 482mm 280mm 44mmP R O D U C T F E A T U R E S
19” front rack mounting enclosures provides patching • and fi bre slack storage.
Accommodates up to three connector panels.•
Nylon cable radius guides and centre strength • member clamps.
Cable fi bre track cover provides additional protection • and a clean outlook.
Clear, easy access slide-out and removeable • Plexiglass cover.
Accommodates both single-mode and multi-• mode fi bre.
Rugged steel construction in graphite fi nish.•
Optional splice tray can be mounted to the unit.•
C U S T O M E R B E N E F I T S
Provide patching and fi bre slack storage capability with • technicians and users in mind.
The technician’s side has facilities for securing the cable • storing fi bre slack and arranging the terminated fi bres.
The user’s side has similar features for the • management of fi bre optic patch cords.
66mm deep front cable panel for patch cord • management and protection.
Nylon cable radius guide within the enclosure to • accommodate excess fi bres while maintaining fi bre bend radius.
Cable fi bre track cover to give additional protection and • clean outlook.
Optional splice tray can be mounted to manage and • protect either fusion or mechanical splices.
CATALOGUE NUMBER DESCRIPTION
TFM1UF Enclosure Fixed Shallow Fiber Tray 1RU Unloaded Maximum 24 Connectors
TFMSPT Splicing Tray - Suits TFM1UF
TFM1UF
B
C
A
Splicing Tray - Open
Splicing Tray - Closed
136
Clipsal titanium® Fibre Adaptor Panels
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | ADAPTOR PANELS
CATALOGUE NUMBER DESCRIPTION
TFM1UBLANKP Blank Connector Panel
TFM1ULCDS4P LC Duplex SM Panel comes with 4 Connectors
TFM1ULCDM4P LC Duplex MM Panel comes with 4 Connectors
TFM1ULCDS8P LC Duplex SM Panel comes with 8 Connectors
TFM1ULCDM8P LC Duplex MM Panel comes with 8 Connectors
TFM1USCDS4P SC Duplex SM Panel comes with 4 Connectors
TFM1USCDM4P MM Duplex MM Panel comes with 4 Connectors
TFM1USTSS8P ST Simplex SM Panel comes with 8 Connectors
TFM1USTSM8P ST Simplex MM Panel comes with 8 Connectors
TFM1ULCDM8P
The Clipsal titanium® Fibre Adaptor Panels are available in LC, SC and ST confi gurations. The fi bre ddaptors
are colour coded to diferentiate between single mode (blue) and multi-mode (beige). Off ered in simplex and
duplex varieties, they have been manufactured to suit the extensive range of Clipsal titanium fi bre patch cords
and pigtails.
As an integral part of the Clipsal titanium® Fibre Optic Series, these products have a lifetime warranty and
system performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
T E C H N I C A L S P E C I F I C A T I O N S
Product Material
TFM1UBLANKP N/A
TFM1ULCDS4P Zirconia Ceramic
TFM1ULCDM4P Zirconia Ceramic
TFM1ULCDS8P Zirconia Ceramic
TFM1ULCDM8P Zirconia Ceramic
TFM1USCDS4P Zirconia Ceramic
TFM1USCDM4P Zirconia Ceramic
TFM1USTSS8P Zirconia Ceramic
TFM1USTSM8P Zirconia Ceramic
P R O D U C T F E A T U R E S
Adaptors are available as simplex (ST) or duplex.•
All adaptors are compliant to AS/NZS 3080:2003.•
Suits all Clipsal rack mount fi bre panels.•
C U S T O M E R B E N E F I T S
High quality materials gives customers confi dence in • the products performance.
Compliant to local and international standards.•
137
TFWM06SCS1
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE WALL MOUNT ENCLOSURES
Fibre Wall Mount Enclosures6-PortThe Clipsal Wall Mount Enclosure is a cost eff ective and compact fi bre termination solution. This housing enclosure
is ideal for projects where space is limited. Diff erent types of adaptors are available. The standard model can
support a maximum of 6-Port splicing.
D I M E N S I O N S
Product Height Width Depth
TFWM06 SERIES 240mm 285mm 60mm
P R O D U C T F E A T U R E S
Equipped with lockable, hinged covers.•
Available in diff erent adaptor confi gurations.•
Complete with fi bre adaptors.•
Fibre management zone.•
Cable entry glands.•
C U S T O M E R B E N E F I T S
Lightweight, full set and easy-to-install.•
Ideal for indoor use with security lock.•
Cost eff ective and compact fi bre termination solution.•
CATALOGUE NUMBER DESCRIPTION
TFWMO6SCS1 Enclosure Wall Mount Fibre 6 Port SC SM Simplex
TFWMO6SCM1 Enclosure Wall Mount Fibre 6 Port SC MM Simplex
TFWMO6STS1 Enclosure Wall Mount Fibre 6 Port ST SM Simplex
TFWMO6STM1 Enclosure Wall Mount Fibre 6 Port ST MM Simplex
TFWMO6LCS2 Enclosure Wall Mount Fibre 3 Port LC SM Duplex
TFWMO6LCM2 Enclosure Wall Mount Fibre 3 Port LC MM Duplex
138
Fibre Wall Mount Enclosures12-Port
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE WALL MOUNT ENCLOSURES
CATALOGUE NUMBER DESCRIPTION
TFWM12SCS1 Enclosure Wall Mount Fibre 12 Port SC SM Simplex
TFWM12SCM1 Enclosure Wall Mount Fibre 12 Port SC MM Simplex
TFWM12STS1 Enclosure Wall Mount Fibre 12 Port ST SM Simplex
TFWM12STM1 Enclosure Wall Mount Fibre 12 Port ST MM Simplex
TFWM12LCS2 Enclosure Wall Mount Fibre 6 Port LC SM Duplex
TFWM12LCM2 Enclosure Wall Mount Fibre 6 Port LC MM Duplex
TFWM12SCS1
The Clipsal 12-Port Wall Mount Enclosure is a two compartment design. One is for fi bre or pigtail splicing while the
other is for patch cord termination storage. One enclosure comes with full set accessories, including lock, adaptors,
bending radius protector, splicing tray and protection sleeves.
D I M E N S I O N S
Product Height Width Depth
TFWM12 SERIES 260mm 330mm 95mm
P R O D U C T F E A T U R E S
Bundle with all standard accessories and adaptors.•
Equipped with lockable, hinged covers.•
Available in diff erent adaptor confi gurations.•
Bending radius protector.•
Fibre management zone.•
Cable entry glands. •
C U S T O M E R B E N E F I T S
Lightweight, full set and easy-to-install.•
Ideal for indoor use with security lock.•
Cost eff ective and compact fi bre termination solution.•
139
Fibre Wall Mount Enclosures24-Port
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE WALL MOUNT ENCLOSURES
CATALOGUE NUMBER DESCRIPTION
TFWM24SCS1 Enclosure Wall Mount Fibre 24 Port SC SM Simplex
TFWM24STS1 Enclosure Wall Mount Fibre 24 Port ST SM Simplex
TFWM24STM1 Enclosure Wall Mount Fibre 24 Port ST MM Simplex
TFWM24LCS2 Enclosure Wall Mount Fibre 12 Port LC SM Duplex
TFWM24LCM2 Enclosure Wall Mount Fibre 12 Port LC MM Duplex
TFWM24SCS1
The Clipsal 12 and 24-Port Wall Mount Enclosure is a two compartment design. One is for fi bre or pigtail splicing
while the other is for patch cord termination storage. One enclosure comes with full set accessories, including lock,
adaptors, bending radius protector, splicing tray and protection sleeves.
D I M E N S I O N S
Product Height Width Depth
TFWM24 SERIES 420mm 420mm 140mm
P R O D U C T F E A T U R E S
Bundle with all standard accessories and adaptors.•
Equipped with lockable, hinged covers.•
Available in diff erent adaptor confi gurations.•
Bending radius protector.•
Fibre management zone.•
Cable entry glands.•
C U S T O M E R B E N E F I T S
Lightweight, full set and easy-to-install.•
Ideal for indoor use with security lock.•
Cost eff ective and compact fi bre termination solution.•
140
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | FIBRE WALL MOUNT ENCLOSURES
Fibre Wall Mount Enclosures48-PortThe Clipsal 48-Port Wall Mount Enclosure is a compact, lightweight and low profi le design. With 30/70 split door
design, it eases installation under limited space environments.
D I M E N S I O N S
Product Height Width Depth
TFWM48 SERIES 415mm 580mm 145mm
P R O D U C T F E A T U R E S
Equipped with lockable, hinged covers.•
Available in diff erent adaptor confi gurations.•
Fibre management zone.•
Cable entry glands.•
C U S T O M E R B E N E F I T S
Lightweight, full set and easy-to-install.•
Ideal for indoor use with security lock.•
Cost eff ective and compact fi bre termination solution.•
CATALOGUE NUMBER DESCRIPTION
TFWM48SCS1 Enclosure Wall Mount Fibre 48 Port SC SM Simplex
TFWM48SCM1 Enclosure Wall Mount Fibre 48 Port SC MM Simplex
TFWM48STS1 Enclosure Wall Mount Fibre 48 Port ST SM Simplex
TFWM48STM1 Enclosure Wall Mount Fibre 48 Port ST MM Simplex
TFWM48LCS2 Enclosure Wall Mount Fibre 24 Port LC SM Duplex
TFWM48LCM2 Enclosure Wall Mount Fibre 24 Port LC MM Duplex
TFWM48SCS1
141
ST Single Mode Patch Cords - OS1 9/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP1T3S19S05 Patch Cord ST Simplex OS1 SM 0.5m
TFP1T3S19S10 Patch Cord ST Simplex OS1 SM 1.0m
TFP1T3S19S20 Patch Cord ST Simplex OS1 SM 2.0m
TFP1T3S19S50 Patch Cord ST Simplex OS1 SM 5.0m
TFP1T3S19S100 Patch Cord ST Simplex OS1 SM 10.0m
TFP2T3S19S05 Patch Cord ST Duplex OS1 SM 0.5m
TFP2T3S19S10 Patch Cord ST Duplex OS1 SM 1.0m
TFP2T3S19S20 Patch Cord ST Duplex OS1 SM 2.0m
TFP2T3S19S50 Patch Cord ST Duplex OS1 SM 5.0m
TFP2T3S19S100 Patch Cord ST Duplex OS1 SM 10.0m
TFP2T3S19S10
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of patch cords in a wide variety of confi gurations, all constructed with high
quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
142
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
SC Single Mode Patch Cords - OS1 9/125μm
CATALOGUE NUMBER DESCRIPTION
TFP1C3S19S05 Patch Cord SC Simplex OS1 SM 0.5m
TFP1C3S19S10 Patch Cord SC Simplex OS1 SM 1.0m
TFP1C3S19S20 Patch Cord SC Simplex OS1 SM 2.0m
TFP1C3S19S50 Patch Cord SC Simplex OS1 SM 5.0m
TFP1C3S19S100 Patch Cord SC Simplex OS1 SM 10.0m
TFP2C3S19S05 Patch Cord SC Duplex OS1 SM 0.5m
TFP2C3S19S10 Patch Cord SC Duplex OS1 SM 1.0m
TFP2C3S19S20 Patch Cord SC Duplex OS1 SM 2.0m
TFP2C3S19S50 Patch Cord SC Duplex OS1 SM 5.0m
TFP2C3S19S100 Patch Cord SC Duplex OS1 SM 10.0m
TFP2C3S19S10
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of patch cords in a wide variety of confi gurations, all constructed with high
quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
143
LC Single Mode Patch Cords - OS1 9/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP1L3S19S05 Patch Cord LC Simplex OS1 SM 0.5m
TFP1L3S19S10 Patch Cord LC Simplex OS1 SM 1.0m
TFP1L3S19S20 Patch Cord LC Simplex OS1 SM 2.0m
TFP1L3S19S50 Patch Cord LC Simplex OS1 SM 5.0m
TFP1L3S19S100 Patch Cord LC Simplex OS1 SM 10.0m
TFP2L3S19S05 Patch Cord LC Duplex OS1 SM 0.5m
TFP2L3S19S10 Patch Cord LC Duplex OS1 SM 1.0m
TFP2L3S19S20 Patch Cord LC Duplex OS1 SM 2.0m
TFP2L3S19S50 Patch Cord LC Duplex OS1 SM 5.0m
TFP2L3S19S100 Patch Cord LC Duplex OS1 SM 10.0m
TFP2T3S19S10
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of patch cords in a wide variety of confi gurations, all constructed with high
quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
144
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
SC Multi Mode Patch Cords - OM1 62.5/125μm
CATALOGUE NUMBER DESCRIPTION
TFP1C3M15M05 Patch Cord SC Simplex OM1 MM 0.5m
TFP1C3M15M10 Patch Cord SC Simplex OM1 MM 1.0m
TFP1C3M15M20 Patch Cord SC Simplex OM1 MM 2.0m
TFP1C3M15M50 Patch Cord SC Simplex OM1 MM 5.0m
TFP1C3M15M100 Patch Cord SC Simplex OM1 MM 10.0m
TFP2C3M15M05 Patch Cord SC Duplex OM1 MM 0.5m
TFP2C3M15M10 Patch Cord SC Duplex OM1 MM 1.0m
TFP2C3M15M20 Patch Cord SC Duplex OM1 MM 2.0m
TFP2C3M15M50 Patch Cord SC Duplex OM1 MM 5.0m
TFP2C3M15M100 Patch Cord SC Duplex OM1 MM 10.0m
TFP2C3M16M20
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
145
ST Multi Mode Patch Cords - OM1 62.5/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP1T3M16M05 Patch Cord ST Simplex OM1 MM 0.5m
TFP1T3M16M10 Patch Cord ST Simplex OM1 MM 1.0m
TFP1T3M16M20 Patch Cord ST Simplex OM1 MM 2.0m
TFP1T3M16M50 Patch Cord ST Simplex OM1 MM 5.0m
TFP1T3M16M100 Patch Cord ST Simplex OM1 MM 10.0m
TFP2T3M16M05 Patch Cord ST Duplex OM1 MM 0.5m
TFP2T3M16M10 Patch Cord ST Duplex OM1 MM 1.0m
TFP2T3M16M20 Patch Cord ST Duplex OM1 MM 2.0m
TFP2T3M16M50 Patch Cord ST Duplex OM1 MM 5.0m
TFP2T3M16M100 Patch Cord ST Duplex OM1 MM 10.0m
TFP2T3M16M20
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
146
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
LC Multi Mode Patch Cords - OM1 62.5/125μm
CATALOGUE NUMBER DESCRIPTION
TFP2L3M16M05 Patch Cord LC Duplex OM1 MM 0.5m
TFP2L3M16M10 Patch Cord LC Duplex OM1 MM 1.0m
TFP2L3M16M20 Patch Cord LC Duplex OM1 MM 2.0m
TFP2L3M16M50 Patch Cord LC Duplex OM1 MM 5.0m
TFP2L3M16M100 Patch Cord LC Duplex OM1 MM 10.0m
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFP2L3M16M05
147
ST-SC Multi Mode Patch Cords - OM1 62.5/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP2TC3M16M05 Patch Cord ST-SC Duplex OM1 MM 0.5m
TFP2TC3M16M10 Patch Cord ST-SC Duplex OM1 MM 1.0m
TFP2TC3M16M20 Patch Cord ST-SC Duplex OM1 MM 2.0m
TFP2TC3M16M50 Patch Cord ST-SC Duplex OM1 MM 5.0m
TFP2TC3M16M100 Patch Cord ST-SC Duplex OM1 MM 10.0m
TFP2TC3M16M20
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
148
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
SC-LC Multi Mode Patch Cords - OM1 62.5/125μm
CATALOGUE NUMBER DESCRIPTION
TFP2CL3M16M05 Patch Cord SC-LC Duplex OM1 MM 0.5m
TFP2CL3M16M10 Patch Cord SC-LC Duplex OM1 MM 1.0m
TFP2CL3M16M20 Patch Cord SC-LC Duplex OM1 MM 2.0m
TFP2CL3M16M50 Patch Cord SC-LC Duplex OM1 MM 5.0m
TFP2CL3M16M100 Patch Cord SC-LC Duplex OM1 MM 10.0m
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFP2CL3M16M20
149
SC Multi Mode Patch Cords - OM3 50/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP1C3M35M05 Patch Cord SC Simplex OM3 MM 0.5m
TFP1C3M35M10 Patch Cord SC Simplex OM3 MM 1.0m
TFP1C3M35M20 Patch Cord SC Simplex OM3 MM 2.0m
TFP1C3M35M50 Patch Cord SC Simplex OM3 MM 5.0m
TFP1C3M35M100 Patch Cord SC Simplex OM3 MM 10.0m
TFP2C3M35M05 Patch Cord SC Duplex OM3 MM 0.5m
TFP2C3M35M10 Patch Cord SC Duplex OM3 MM 1.0m
TFP2C3M35M20 Patch Cord SC Duplex OM3 MM 2.0m
TFP2C3M35M50 Patch Cord SC Duplex OM3 MM 5.0m
TFP2C3M35M100 Patch Cord SC Duplex OM3 MM 10.0m
TFP2TC3M35M20
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
150
TFP2T3M35M20
ST Multi Mode Patch Cords - OM3 50/125μm
CATALOGUE NUMBER DESCRIPTION
TFP1T3M35M05 Patch Cord SC Simplex OM3 MM 0.5m
TFP1T3M35M10 Patch Cord SC Simplex OM3 MM 1.0m
TFP1T3M35M20 Patch Cord SC Simplex OM3 MM 2.0m
TFP1T3M35M50 Patch Cord SC Simplex OM3 MM 5.0m
TFP1T3M35M100 Patch Cord SC Simplex OM3 MM 10.0m
TFP2T3M35M05 Patch Cord SC Duplex OM3 MM 0.5m
TFP2T3M35M10 Patch Cord SC Duplex OM3 MM 1.0m
TFP2T3M35M20 Patch Cord SC Duplex OM3 MM 2.0m
TFP2T3M35M50 Patch Cord SC Duplex OM3 MM 5.0m
TFP2T3M35M100 Patch Cord SC Duplex OM3 MM 10.0m
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
151
LC Multi Mode Patch Cords - OM3 50/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP2L3M35M05 Patch Cord LC Duplex OM3 MM 0.5m
TFP2L3M35M10 Patch Cord LC Duplex OM3 MM 1.0m
TFP2L3M35M20 Patch Cord LC Duplex OM3 MM 2.0m
TFP2L3M35M50 Patch Cord LC Duplex OM3 MM 5.0m
TFP2L3M35M100 Patch Cord LC Duplex OM3 MM 10.0m
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFP2L3M35M20
152
TFP2TC3M35M20
ST-SC Multi Mode Patch Cords - OM3 50/125μm
CATALOGUE NUMBER DESCRIPTION
TFP2TC3M35M05 Patch Cord LST-SC Duplex OM3 MM 0.5m
TFP2TC3M35M10 Patch Cord LST-SC Duplex OM3 MM 1.0m
TFP2TC3M35M20 Patch Cord LST-SC Duplex OM3 MM 2.0m
TFP2TC3M35M50 Patch Cord LST-SC Duplex OM3 MM 5.0m
TFP2TC3M35M100 Patch Cord LST-SC Duplex OM3 MM 10.0m
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
153
SC-LC Multi Mode Patch Cords - OM3 50/125μm
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PATCH CORDS
CATALOGUE NUMBER DESCRIPTION
TFP2CL3M35M05 Patch Cord SC-LC Duplex OM3 MM 0.5m
TFP2CL3M35M10 Patch Cord SC-LC Duplex OM3 MM 1.0m
TFP2CL3M35M20 Patch Cord SC-LC Duplex OM3 MM 2.0m
TFP2CL3M35M50 Patch Cord SC-LC Duplex OM3 MM 5.0m
TFP2CL3M35M100 Patch Cord SC-LC Duplex OM3 MM 10.0m
The Clipsal titanium® Fibre Optic Patch Cords are a superior product, delivering the best network performance
when used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of multi mode patch cords in a wide variety of confi gurations, all constructed with
high quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFP2CL35M20
154
ST Fibre Pigtails
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PIGTAILS
CATALOGUE NUMBER DESCRIPTION
OS1 9/125UM Fibre - Single Mode
TFT1T3S19S10 Pigtail ST Simplex OS1 SM 1.0m
TFT1T3S19S20 Pigtail ST Simplex OS1 SM 2.0m
OM1 62.5/125UM Fibre - Multi Mode
TFT1T3M16M10 Pigtail ST Simplex OM1 MM 1.0m
TFT1T3M16M20 Pigtail ST Simplex OM1 MM 2.0m
OM3 50/125UM Fibre - Multi Mode
TFT1T3M35M10 Pigtail ST Simplex OM3 MM 1.0m
TFT1T3M35M20 Pigtail ST Simplex OM3 MM 2.0m
The Clipsal titanium® Fibre Optic Pigtails are a superior product, delivering the best network performance when
used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of Pigtails in a wide variety of confi gurations, all constructed with high
quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFT1T3M16M10
155
SC Fibre Pigtails
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | PIGTAILS
CATALOGUE NUMBER DESCRIPTION
OS1 9/125UM Fibre - Single Mode
TFT1C3S19S10 Pigtail SC Simplex OS1 SM 1.0m
TFT1C3S19S20 Pigtail SC Simplex OS1 SM 2.0m
OM1 62.5/125UM Fibre - Multi Mode
TFT1C3M16M10 Pigtail SC Simplex OM1 MM 1.0m
TFT1C3M16M20 Pigtail SC Simplex OM1 MM 2.0m
OM3 50/125UM Fibre - Multi Mode
TFT1C3M35M10 Pigtail SC Simplex OM3 MM 1.0m
TFT1C3M35M20 Pigtail SC Simplex OM3 MM 2.0m
The Clipsal titanium® Fibre Optic Pigtails are a superior product, delivering the best network performance when
used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of Pigtails in a wide variety of confi gurations, all constructed with high
quality materials.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
TFT1C3M16M10
156
12 Core Fibre Pigtail - Rainbow
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
The Clipsal titanium® Fibre Optic Pigtails are a superior product, delivering the best network performance when
used in conjunction with other Clipsal Datacomms Fibre Optic products.
Clipsal off ers a complete range of Pigtails in a wide variety of confi gurations, all constructed with high
quality materials.
The Rainbow Pigtails are specifi cally colour coded to match backbone fi bre cabling and assist in fi bre splicing.
As an integral part of the Clipsal Datacomms Fibre Optic Series, these products have a lifetime warranty and system
performance guarantee when installed by a Clipsal Certifi ed Installer or Endorsed Partner.
P R O D U C T F E A T U R E S
Available in several lengths.•
Factory terminated.•
Cords are easy to install and environmentally stable.•
AS/NZS 3080: 2003 Standard compliant.•
Colour coded cable and adaptors for single • mode applications.
C U S T O M E R B E N E F I T S
The various lengths allow for easier cable • management.
Compliant to local and international standards.•
CATALOGUE NUMBER DESCRIPTION
OS1 9/125UM Fibre - Single Mode
TFT12C3S19S10 Pigtail SC 12 Core OS1 SM 1.0m
TFT12L3S19S10 Pigtail LC 12 Core OS1 SM 1.0m
OM1 62.5/125UM Fibre - Multi Mode
TFT12C3M16M10 Pigtail SC Core OM1 MM 1.0m
TFT12L3M16M10 Pigtail LC Core OM1 MM 1.0m
OM3 50/125UM Fibre - Multi Mode
TFT12C3M35M10 Pigtail SC Core OM3 MM 1.0m
TFT12L3M35M10 Pigtail LC Core OM3 MM 1.0m
TFT12C3M16M10
157
Clipsal Optical Fibre CableIndoor/Outdoor Riser - Single Mode - OS1 9/125μm
CATALOGUE NUMBER DESCRIPTION
2F6SMIOLR Light Dusty Riser Indoor/Outdoor 6 Fibre
The Clipsal Indoor/Outdoor Riser Optical Cable features 900μm tight buff ered optical fi bres. The cable core is
surrounded with high absorption performance water swellable yarns thus permitting rapid cable preparation
and termination. The cable outer sheath is UV resistant and made from a Low Smoke Zero Halogen (LSZH) fl ame
retardant and low toxicity gas emission material.
The riser cable is suitable for:
Local Area Network•
Horizontal Wiring•
Building Backbone•
Campus Backbone.•
Most suitable for riser application; e.g. lift shafts, as fi bres will not creep within cable jacket. No looping is required.
Vertical drops up to 100m can be achieved with no clamping. Longer distances can be achieved with clamping at
least every 600mm.
Typical installation environment for these indoor/outdoor cables includes fully enclosed locations as well as
external locations where cable may be soaked by water on an intermittent basis. When installed outdoors, cable
must be installed in dry and drained conduit or duct and these must be eff ectively maintained throughout the life
of the cable to ensure no water penetration, and adequate drainage should water penetration occur.
C O L O U R C H A R T
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
6 5.6 30 105 0.6
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
158
Clipsal Optical Fibre CableIndoor/Outdoor Riser - Multi Mode - OM1 6.25/125μm
CATALOGUE NUMBER DESCRIPTION
2F4MMIOLR Light Dusty Riser Indoor/Outdoor 4 Fibre
2F6MMIOLR Light Dusty Riser Indoor/Outdoor 6 Fibre
2F8MMIOLR Light Dusty Riser Indoor/Outdoor 8 Fibre
2F12MMIOLR Light Dusty Riser Indoor/Outdoor 12 Fibre
2F24MMIOLR Light Dusty Riser Indoor/Outdoor 24 Fibre
The Clipsal Indoor/Outdoor Riser Optical Cable features 900μm tight buff ered optical fi bres. The cable core is
surrounded with high absorption performance water swellable yarns thus permitting rapid cable preparation
and termination. The cable outer sheath is UV resistant and made from a Low Smoke Zero Halogen (LSZH) fl ame
retardant and low toxicity gas emission material.
The riser cable is suitable for:
Local Area Network•
Horizontal Wiring•
Building Backbone•
Campus Backbone.•
Most suitable for riser application; e.g. lift shafts, as fi bres will not creep within cable jacket. No looping is required.
Vertical drops up to 100m can be achieved with no clamping. Longer distances can be achieved with clamping at
least every 600mm.
Typical installation environment for these indoor/outdoor cables includes fully enclosed locations as well as
external locations where cable may be soaked by water on an intermittent basis. When installed outdoors, cable
must be installed in dry and drained conduit or duct and these must be eff ectively maintained throughout the life
of the cable to ensure no water penetration, and adequate drainage should water penetration occur.
C O L O U R C H A R T
Fibre Number Colour Fibre Number Colour
1 Blue 13 Blue
2 Orange 14 Orange
3 Green 15 Green
4 Brown 16 Brown
5 Grey 17 Grey
6 White 18 White
7 Red 19 Red
8 Black 20 Black
9 Yellow 21 Yellow
10 Violet 22 Violet
11 Pink 23 Pink
12 Aqua 24 Aqua
Note: For 24 Fibre Cables, unit colour coding applies.
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
4 4.8 22 85 0.6
6 5.6 30 105 0.6
8 6.0 34 110 0.6
12 6.7 40 125 0.6
24 9.2 70 180 1.0
2F8MMIOLR
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
159
Clipsal Optical Fibre CableIndoor/Outdoor Riser - Multi Mode - OM3 50/125μm
CATALOGUE NUMBER DESCRIPTION
2F4CMIOR50 Light Dusty Riser Indoor/Outdoor OM3 4 Core
2F6CMIOR50 Light Dusty Riser Indoor/Outdoor OM3 6 Core
2F8CMIOR50 Light Dusty Riser Indoor/Outdoor OM3 8 Core
2F12CMIOR50 Light Dusty Riser Indoor/Outdoor OM3 12 Core
2F24CMIOR50 Light Dusty Riser Indoor/Outdoor OM3 24 Core
The Clipsal Indoor/Outdoor Riser Optical Cable features 900μm tight buff ered optical fi bres. The cable core is
surrounded with high absorption performance water swellable yarns thus permitting rapid cable preparation
and termination. The cable outer sheath is UV resistant and made from a Low Smoke Zero Halogen (LSZH) fl ame
retardant and low toxicity gas emission material.
The riser cable is suitable for:
Local Area Network•
Horizontal Wiring•
Building Backbone•
Campus Backbone.•
Most suitable for riser application; e.g. lift shafts, as fi bres will not creep within cable jacket. No looping is required.
Vertical drops up to 100m can be achieved with no clamping. Longer distances can be achieved with clamping at
least every 600mm.
Typical installation environment for these indoor/outdoor cables includes fully enclosed locations as well as
external locations where cable may be soaked by water on an intermittent basis. When installed outdoors, cable
must be installed in dry and drained conduit or duct and these must be eff ectively maintained throughout the life
of the cable to ensure no water penetration, and adequate drainage should water penetration occur.
C O L O U R C H A R T
Fibre Number Colour Fibre Number Colour
1 Blue 13 Blue
2 Orange 14 Orange
3 Green 15 Green
4 Brown 16 Brown
5 Grey 17 Grey
6 White 18 White
7 Red 19 Red
8 Black 20 Black
9 Yellow 21 Yellow
10 Violet 22 Violet
11 Pink 23 Pink
12 Aqua 24 Aqua
Note: For 24 Fibre Cables, unit colour coding applies.
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
4 4.8 22 85 0.6
6 5.6 30 105 0.6
8 6.0 34 110 0.6
12 6.7 40 125 0.6
24 9.2 70 180 1.0
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
160
Clipsal Optical Fibre CableIndoor/Outdoor Riser - Multi Mode - OM1
CATALOGUE NUMBER DESCRIPTION
2F4CMIOHB Heavy Duty Breakout Cable Indoor/Outdoor 4 Fibre
2F6CMIOHB Heavy Duty Breakout Cable Indoor/Outdoor 6 Fibre
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
The Clipsal Indoor/Outdoor Riser Optical Cable features 900μm tight buff ered optical fi bres. The cable core is
surrounded with high absorption performance water swellable yarns thus permitting rapid cable preparation
and termination. The cable outer sheath is UV resistant and made from a Low Smoke Zero Halogen (LSZH) fl ame
retardant and low toxicity gas emission material.
The riser cable is suitable for:
Local Area Network (including FDDI Cabling)•
Ethernet•
Token Ring.•
Most suitable for heavy duty and horizontal riser application; e.g. lift shafts, as fi bres will not creep within cable
jacket. No looping is required. Vertical drops up to 500m can be achieved with no clamping. Longer distances can
be achieved with clamping at least every 3m.
Typical installation environment for these indoor/outdoor cables includes fully enclosed locations as well as
external locations where cable may be soaked by water on an intermittent basis. When installed outdoors, cable
must be installed in dry and drained conduit or duct and these must be eff ectively maintained throughout the life
of the cable to ensure no water penetration, and adequate drainage should water penetration occur.
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
4 8.2 63/70 180 0.6
6 8.2 63/70 180 0.6
2F12CMIOHB
161
Clipsal Optical Fibre Cable Underground Multi-Mode - Loose Tube - Dry Core - OM1
CATALOGUE NUMBER DESCRIPTION
2F4CMOLDN Underground Loose Tube Dry Core - 4 Core Multi Mode Nylon Jacket 62.5/125
2F6CMOLDN Underground Loose Tube Dry Core - 6 Core Multi Mode Nylon Jacket 62.5/125
2F8CMOLDN Underground Loose Tube Dry Core - 8 Core Multi Mode Nylon Jacket 62.5/125
2F12CMOLDN Underground Loose Tube Dry Core - 12 Core Multi Mode Nylon Jacket 62.5/125
2F24CMOLDN Underground Loose Tube Dry Core - 24 Core Multi Mode Nylon Jacket 62.5/125
The Clipsal Distribution Underground Optical Cable contains acrylate coated optical fi bres in water blocked loose
tubes. Elements are stranded around a non-metallic central strength member. The cable core is made up of a
combination of water blocked loose tubes (each containing up to 12 optical fi bres) and solid fi llers, to give the
required fi bre count. The cable core is surrounded with high absorption performance water swellable yarns and
wrapped with tape/binders as required thus permitting rapid cable preparation and termination. The cable is
sheathed with polyethylene and jacketed with an integrally bounded nylon jacket as a protective layer against
termites and ants.
The cable is suitable for:
Local Area Network •
Ethernet as Wide Area Network•
Aerial Lashed•
ATM•
Direct Burial•
Video on Demand•
Campus Backbone•
In Conduit•
Blowing Installation•
SDH•
Broadcast TV•
Underground.•
Most suitable for longer length roll out (direct burial) up to 25km or 40km (for 2-72F) on special request. Cable
must be coiled every 30m for vertical applications.
O P T I C A L F I B R E C O L O U R C H A R T ( 1 2 F P E R T U B E )
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Pink
12 Aqua
Note: For 24 Fibre Cables, unit colour coding applies.
T U B E C O L O U R C H A R T
Fibre Number Colour
1 Blue
2 Orange
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
4 4.8 22 85 0.6
6 5.6 30 105 0.6
8 6.0 34 110 0.6
12 6.7 40 125 0.6
24 9.2 70 180 1.0
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
2F12CMOLDN
162
Clipsal Optical Fibre Cable Underground Multi-Mode - Loose Tube - Dry Core - OM3
CATALOGUE NUMBER DESCRIPTION
2F4CMOLPN50 Underground Loose Tube Dry Core - 4 Core Multi Mode Nylon Jacket 50/125
2F6CMOLPN50 Underground Loose Tube Dry Core - 6 Core Multi Mode Nylon Jacket 50/125
2F8CMOLPN50 Underground Loose Tube Dry Core - 8 Core Multi Mode Nylon Jacket 50/125
2F12CMOLPN50 Underground Loose Tube Dry Core - 12 Core Multi Mode Nylon Jacket 50/125
The Clipsal Distribution Underground Optical Cable contains acrylate coated optical fi bres in water blocked loose
tubes. Elements are stranded around a non-metallic central strength member. The cable core is made up of a
combination of water blocked loose tubes (each containing up to 12 optical fi bres) and solid fi llers, to give the
required fi bre count. The cable core is surrounded with high absorption performance water swellable yarns and
wrapped with tape/binders as required thus permitting rapid cable preparation and termination. The cable is
sheathed with polyethylene and jacketed with an integrally bounded nylon jacket as a protective layer against
termites and ants.
The cable is suitable for:
Local Area Network •
Ethernet as Wide Area Network•
Aerial Lashed•
ATM•
Direct Burial•
Video on Demand•
Campus Backbone•
In Conduit•
Blowing Installation•
SDH•
Broadcast TV•
Underground.•
Most suitable for longer length roll out (direct burial) up to 25km or 40km (for 2-72F) on special request. Cable
must be coiled every 30m for vertical applications.
O P T I C A L F I B R E C O L O U R C H A R T ( 1 2 F P E R T U B E )
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Pink
12 Aqua
T U B E C O L O U R C H A R T
Fibre Number Colour
1 Blue
2 Orange
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
2 9.1 60 - 65 180 1.8
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
163
Clipsal Optical Fibre Cable Underground Single Mode - Loose Tube - Dry Core - OS1
CATALOGUE NUMBER DESCRIPTION
2F6CSOLDN Underground Loose Tube Dry Core - 6 Core Single Mode Nylon Jacket 9/125
2F8CSOLDN Underground Loose Tube Dry Core - 8 Core Single Mode Nylon Jacket 9/125
2F12CSOLDN Underground Loose Tube Dry Core - 12 Core Single Mode Nylon Jacket 9/125
2F24CSOLDN Underground Loose Tube Dry Core - 24 Core Single Mode Nylon Jacket 9/125
The Clipsal Distribution Underground Optical Cable contains acrylate coated optical fi bres in water blocked loose
tubes. Elements are stranded around a non-metallic central strength member. The cable core is made up of a
combination of water blocked loose tubes (each containing up to 12 optical fi bres) and solid fi llers, to give the
required fi bre count. The cable core is surrounded with high absorption performance water swellable yarns and
wrapped with tape/binders as required thus permitting rapid cable preparation and termination. The cable is
sheathed with polyethylene and jacketed with an integrally bounded nylon jacket as a protective layer against
termites and ants.
The cable is suitable for:
Local Area Network •
Ethernet as Wide Area Network•
Aerial Lashed•
ATM•
Direct Burial•
Video on Demand•
Campus Backbone•
In Conduit•
Blowing Installation•
SDH•
Broadcast TV•
Underground.•
Most suitable for longer length roll out (direct burial) up to 25km or 40km (for 2-72F) on special request. Cable
must be coiled every 30m for vertical applications.
O P T I C A L F I B R E C O L O U R C H A R T ( 1 2 F P E R T U B E )
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Pink
12 Aqua
T U B E C O L O U R C H A R T
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
2 - 48 9.1 60 -65 180 1.8
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE
2F6CSOLDN
164
Clipsal Optical Fibre Cable Underground Composite Fibre - Dry Core - OM1
CATALOGUE NUMBER DESCRIPTION
2F6S6MOLDN Underground Loose Tube Dry Core - Standard Construction S/M 6 Core M/M 6 Core
2F6S12MOLDN Underground Loose Tube Dry Core - Standard Construction S/M 6 Core M/M12 Core
2F12S12MOLDN Underground Loose Tube Dry Core - Standard Construction S/M 12 Core M/M 12 Core
The Clipsal Distribution Underground Optical Cable contains acrylate coated optical fi bres in water blocked loose
tubes. Elements are stranded around a non-metallic central strength member. The cable core is made up of a
combination of water blocked loose tubes (each containing up to 12 optical fi bres) and solid fi llers, to give the
required fi bre count. The cable core is surrounded with high absorption performance water swellable yarns and
wrapped with tape/binders as required thus permitting rapid cable preparation and termination. The cable is
sheathed with polyethylene and jacketed with an integrally bounded nylon jacket as a protective layer against
termites and ants.
The cable is suitable for:
Local Area Network •
Ethernet as Wide Area Network•
Aerial Lashed•
ATM•
Direct Burial•
Video on Demand•
Campus Backbone•
In Conduit•
Blowing Installation•
SDH•
Broadcast TV•
Underground.•
Most suitable for longer length roll out (direct burial) up to 25km or 40km (for 2-72F) on special request. Cable
must be coiled every 30m for vertical applications.
O P T I C A L F I B R E C O L O U R C H A R T ( 1 2 F P E R T U B E )
Fibre Number Colour
1 Blue
2 Orange
3 Green
4 Brown
5 Grey
6 White
7 Red
8 Black
9 Yellow
10 Violet
11 Pink
12 Aqua
T U B E C O L O U R C H A R T
Fibre Number Colour
1 Blue
2 Orange
Fibre Count Diameter (mm) Mass (kg/km) Min. Bend Radius
(mm)
Max. Tensile
Strength (kN)
2 - 72 9.1 60 -65 180 1.8
CLIPSAL DATACOMMS | OPTICAL FIBRE SOLUTION | CABLE