5/14/2018 OPTALIGN Smart 2 Page Flyer ALI 9.120!11!09 En - slidepdf.com
http://slidepdf.com/reader/full/optalign-smart-2-page-flyer-ali-91201109-en 1/3
Maintaining high standards in machinery alignment
OPTALIGN® smart
K E E P S T H E W O R L
D R O T A T
I N
G
O P T A LIG N ®
1 9 8 4 − 2 0
0 9
T H E I N V
E N T O R S
O F LA S E
R S HA F T
A L I G N M E
N T
5/14/2018 OPTALIGN Smart 2 Page Flyer ALI 9.120!11!09 En - slidepdf.com
http://slidepdf.com/reader/full/optalign-smart-2-page-flyer-ali-91201109-en 2/3
The integrated OPTALIGN® smart RF module allows
wireless data transmission rom the transducer to
the computer.
Sweep mode – As the shat is rotated,
data is automatically and continuously
collected. OPTALIGN® smart determines
the alignment condition with a shat
rotation o as little as 60°. Measurement can
start at any shat position and in any direction.
This mode is quick and captures hundreds o
measurement points, hence more accurate
than the 3-clock positions measurement method.
Most rotating machines
require an accuracy close to
that attained by the continu-
ous sweep mode.
TolChek® – Dynamic tolerances evaluate the
alignment condition based upon the machine
RPM. The LEDs and Smiley provide visual
indication o the alignment condition and the
update status during machine correction.
PRÜFTECHNIK
Alignment Systems GmbH
Freisinger Str. 34
85737 Ismaning
Germany
Tel +49 89 99616-0
Fax +49 89 99616-100
www.prutechnik.com
© C o p y r i g h t 2 0 0 9 b y P R Ü F T E C H N I K A G
A L I 9 . 1 2 0 . 1 1 . 0 9 . e n
OPTALIGN® smart
Powerful options
3-Machine train alignment
Ability to enter alignment targets and thermalgrowth values including input o dial indicatorreadings
Fixed eet selection – resolves base-boundand bolt-bound problems
InniRange® extends detector measurementrange to handle gross misalignment
Multipoint mode – measurement at any 3 ormore positions over 60° rotation or wider
Alignment o vertical and fange-mountedmachines
Alignment o cardan and spacer shats
RF module or wireless data transmissionHeavy-duty rechargeable Li-Ion battery
The PC sotware ALIGNMENT CENTER supports2-way communication between a PC and thesystem, and is used or editing, archiving andprinting proessional color reports
Maintaining high standards in machinery alignment
Alignment results
in 3 steps:
1. Enter dimensions,
2. Rotate shafts,
3. Display alignment
condition.
Available in intrinsically
safe version
ATEX/Ex/IECEx.
CE conformity.
Automatic evaluation of alignment
Standard features
Wireless communication and USB interaceintegrated within the computer
High resolution backlit colour TFT screen
UniBeam® or quick adjustment o the singlelaser beam
Alignment o coupled, uncoupled andnonrotatable shats
Automatic continuous measurement as shat isrotated – start and stop rotation at any position
Automatic evaluation o alignment conditionwith TolChek® and customer-dened tolerances
QuickCheck – a quick alignment check using asingle dimension to display both horizontal andvertical coupling values
Static measurement mode – requires any 3 o the8 available 45° measurement positions
Live monitoring o horizontal or verticalmachine corrections
Veriy measurement repeatability using theresults table
Save up to 500 measurement les and measure-ment reports as PDFs directly to a memory stick
Data protection - auto save and resume capability
Sot oot check – measure, correct and save results
Protected against dust, water and grease incompliance with classication IP 65 and IP 67
PC reeware ALIGNMENT REPORTER is used tobackup measurement les and print reports
Continuous sweep mode