BATHROOM SYSTEMS CATALOGUE 2012
BATH
RO
OM
SY
STE
MS
CATA
LOG
UE
2012
www.olisrl.it - www.oli.pt
Oli S.r.l.Localit Piani di Mura
25070 Casto (BS) Italy Tel.+39 0365 890611
Fax +39 0365 879922 [email protected]
Oliveira & Irmo, SAVariante da Cidade - Apartado 705
3801-851 Aveiro - PortugalTel. +351 234 300200Fax +351 234 300212
Uffi
cio
Pub
blic
it O
LI -
A-7
9/0
Oct
ober
201
2
Certified Quality management system ISO 9001:2008.
BATHROOM SYSTEMS CATALOGUE 2012
Special products 15
In-wall flush cisterns 33
Simflex installation system for wall sanitary wares - brick walls 43
Sanitarblock installation systems for wall-hung sanitary wares 55
Sanitarblock installation systems for wall-hung sanitary wares - free standing 71
Control plates 79
Exposed flush cisterns 119
Pneumatic flush cisterns, conversion kits and remote actuators 135
Universal mechanisms for cisterns 151
Flush pipe and accessories 163
Spare parts 177
Olifilo - system for floor even shower 227
Packaging details 215
Traps 245
Price list and general sales terms 285
4OLI is part of the Fonditalgroup, an industrial reality experiencing continuous growth and becoming increasingly competitive in international markets where it has been leader for over 30 years in the heating sector, in the fusion of aluminium alloys and in the plumbing systems sector.
In particular, OLI produces and markets products and systems for heating and plumbing systems and is a reference point in the production of flush cisterns and systems, mechanisms and components for ceramic cisterns.
The Company
5Since it was founded in 1954, the Company has continuously renewed and improved its products, thus earning itself a position of prestige and credibility in international circuits.
The quality and reliability of its products and its ability to supply a rapid and efficient after-sales service are the basis of the success that OLI has constructed by adopting a rigorous and methodical work approach. The excellence of its products is constantly verified by tests that are performed in compliance with the most severe international standards.
6MarketsOLIs commercial activities extend to all continents with a presence in over 60 international markets.
This extensive coverage reflects the ability of OLI to adapt the characteristics of its products to different installation practices and uses and above all to meet the different standard requirements, that often differ from one country to another. These are some of the most important international markets where OLI is well known and appreciated: Australia, Egypt, Holland, UK, France, Germany, Greece, Hong Kong, United Arab Emirates, Russia, Saudi Arabia, Spain, Japan, South Africa, New Zealand, Iran, India, Brasil, Venezuela, Chile, Mexico, Colombia, Peru, Norway, Finland and Denmark.
Etihad Towers
Abu Dahbi
Al Bidda Tower
Doha
Intercontinental Hotel
Nova Deli
Ritx Carlton Hotel
Emirati Arabi
Prague Imperial Hotel
Praga
Hilton
Nuova Zelanda
Imoluanda
Luanda
Hotel Doubletree Hilton
Olbia
7Commercial activitiesFavouring a strategy that focuses on building loyalty, OLI develops its after-sales service with an orientation to the total satisfaction of all its clients: distributors, architects, planners, plumbers and end users.
ProductionOLI produces and markets in-wall cisterns, mounting frames for wall-hung pans, control plates and buttons, exposed cisterns, flush mechanisms, systems for floor level showers, pipes, traps, flue pipes and other components.
Industrial activitiesDynamism and quality are two key words in the daily activities of the Company.
These two concepts are the basis of an explosive growth strategy with the use of important resources in the search for new solutions to increase its range of products and therefore the presence of OLI on the market.
OLI accompanies this propensity toward innovation with a strong commitment to the protection of its intellectual property rights through a large number of patents.
DesignThrough a team of highly specialised planners, engineers and technicians, design is conceived as the result of a perfect balance of aesthetics, functionality and performances.
The research and the development of new products is oriented toward solutions that create a sustainable and rationalised use of one of our most precious resources, water.
The Research and Development department, equipped with technologically advanced equipments and resources, develops collaborations with Universities and industrial bodies oriented toward innovation, realizing the best product offerings for every type of market demand.
8QualityRigorous production processes, together with investments in technological innovation, are the basis of the development and the realization of OLI sanitary systems. This continuous effort is acknowledged by principal International Bodies that certify the quality and reliability of OLI products. From float valves that allow speedy and silent filling of the cistern to mounting frames for wall-hung pans characterised by an elevated load resistance, all our products undergo the most severe tests by International Certification Bodies.
Furthermore, the OLI products comply with the European directive 89/106/EEC regulating CE marking of construction products (Construction Products Directive - CPD) and as of September 2012 this will become obligatory for all flush cisterns sold in the countries that adhere to this regulation.
CertificationsGreat attention to quality has allowed OLI to obtain Company certification by TV, the prestigious German Institute, in compliance with the Standard ISO 9001:2008, as well as numerous product approvals. OLI products meet the quality standards imposed by the most severe certification bodies worldwide: LGA (Germany), CSTB (France), KIWA (Holland), SIET (Italy), SAI GLOBAL (Australia) and WRAS (United Kingdom).
This is the best guarantee that product characteristics fully meet the requirements imposed by all those operating on the market: planners, builders, plumbers and architects.
9Company certification.
OLI quality system: 86 world wide certifications.
NLUK ZA
AU
CH
DE FRHU
10
11
LEEDLEED (Leadership in Energy and Environmental Design) is a certification system, internationally recognised and promoted by the U.S. Green Building Council (USGBC), a no profit association that promotes eco sustainability in protection of the environment. The LEED standards give guidelines for the realization of environmentally sustainable buildings in terms of energy savings and protection of environmental resources. In Italy the Leed standard is promoted by Green Building Italia that performs its functions on a nationwide basis.
Water efficiencyWater is an increasingly limited resource and in recent years has become an asset of extreme economic importance. Climate changes have accentuated this phenomenon and the rational use of water has become a priority.
OLI products are developed and manufactured using advanced technologies, in accordance with principles of good planning to improve the aesthetics and functionality of a product without failing to give constant attention to environmental issues. OLI products reinforce efficiency in the use of water reducing all wastage and promoting a rational and intelligent use of the same.
www.e -green-pages .com
12
Certification of product water efficiencyThe efficient use of water is an environmental imperative in all countries worldwide: work needs to be done urgently in this field because the availability of water could be significantly reduced In the short to medium term.
This environmental awareness led ANQIP to launch a certification and labelling system for product water efficiency in Portugal. This initiative will be the answer to a crucial necessity for urgent action, to guarantee, in the near future, the much desired and indispensable conditions for environmental sustainability.
Why it is important to have classThe certification and labelling system for product water efficiency allows consumers to recognise the water efficiency of all products. This system consists of classifying cisterns into various categories, from category E (least efficient) to category A (most efficient).
Cisterns that fall into category A guarantee the best water efficiency but also an effective cleaning of the toilet bowl. OLI supplies several cisterns that are certified class A of water efficiency. All these cisterns have a maximum flush volume of 6 litres and are supplied with a dual flush system that allows the user to employ the most adequate quantity of water at each flush.
13
Legend
Symbol Description
Dual flush system
Tested with 400 kg load
Silenced inlet valve
Suitable for siphonic wc
Suitable for wall-hung wc
Top or front operation
Pneumatic actuation kit
80 mm thickness
Anti-vandalic system
Fast-fit fixing system
Easy installation and maintenance
Reduced space and easy hygiene
Easy mantenance
Electric supply
Side/top water connection
Bottom water connection
Side water connection
No hand-touch required
Suitable for disable
Water efficency
Ecological
Soft touch
Pieces per pack
Pieces per multi-pack
Pieces per pallet
Special products
Quality, functionality and Customer service: these are the key elements at the base of OLIs success.
Equally important is an orientation toward market observation and interpreting its requirements with product innovation to deliver evolved solutions, improvements for the bathroom environment both in terms of aesthetics and functionality.
Two such examples that complement the range of OLI flush systems are Easy Move and Happy Air.
Combining a sober design with exceptional reliability, Easy Move represents an optimum solution for the bathroom facilitating use of the WC by children, the elderly and the disabled, thanks to the possibility of raising and lowering sitting.
Happy Air, on the other hand, is an optimum solution for bathrooms with no windows: it is a revolutionary air extraction system that radically prevents the diffusion of foul odours inside the room with a exceptionally silent operation.
The height of the WC can be adapted easilyto the height of the person
Activated using the control
Low position Medium position High position
Easy Move
16
17
Easy Move allows the pan height to be altered according to users needs by means of a highly attractive solution. Easy Move is particularly suitable for the disabled: for this reason it is also equipped, as an optional, with a handles kit for the disabled; furthermore, the flush can be activated with a special control panel.
The Easy Move frame is compatible with all WC pan models on the market and guarantees modifications in height of up to 150 mm, starting with a minimum height of 400 mm and reaching a maximum height of 550 mm; the structure has a depth of 200 mm including the cistern and the activation motor.
The engine is extremely powerful with a thrust of more than 600 kg, and offers maximum reliability and silence: when operating the noise of the motor is practically inaudible. The Easy Move structure also incorporates a flexible flush pipe and possesses a movement speed of 12 mm/s thus allowing rapid alteration of the WC pan height. The frontal finish of the Easy Move structure, based on the adoption of a panel in tempered glass, offers a choice of colours that include aquamarine, black or white.
18
0150
726
1455
0-15
0
110
180230
35
100
min
330
max
480
min
100
0m
ax 1
150
205
160
1180
1345
300400
19
Characteristics Free-standing frame with OLI74 dual flush cistern (6/3 - 7/3.5 litres)
Ergonomic system that is adjustable in height by 150 mm
Silent electric engine Power supply: 220 V (50/60 Hz) Power source: 350 Watt Insulation: IP66 Movement velocity of 12 mm/s Sheet of tempered glass 6 mm in thickness Push power: 6000 N (ca 600 kgf) Traction power 3000 N (ca 400 kgf) Limit switch
Included Flexible outlet pipe Remote activation Eletric engine Glass (6x400x1345 mm) Same standard accessories as Oli74 Sanitarblock
Easy Move
Cod. Frame Bend Finish
601831 Glass 90/110 White 2,400.00
601833 Glass 90/110 Black 2,400.00
601835 Glass 90/110 Acquamarine 2,400.00
Happy Air
Happy Air is a revolutionary solution to the problem of air renewal in rooms without windows.
A high power extractor allows foul odours to be extracted directly from the WC through the flush pipe and condensation to be extracted through an elegant and discreet plate.
In addition to these characteristics, this product offers an exceptionally silent operation and reliability.
Installation of Happy Air is extremely simple: it is connected directly to the Oli74 flush cistern system and there are no particular restrictions in its positioning; the adjustable front panel can in fact be installed on the wall or in the ceiling.
The extractor fan operates at 230 V/50 Hz or 110 V/50 Hz and can be activated both with a switch installed in parallel with the lighting or with a presence detector.
Happy Air, in combination with the Oli74 flush cistern meets the most severe Italian and European standards.
22
Technical featuresOne fan, two aspiration possibilities.Happy Air system allows the suction of bad smells directly from WC and, at the same time, bad air/condensate from the fan covering plate.
High aspiration capacity.Happy Air system, in compliance with the strictest Italian and European regulations, can properly work always reaching high level performances.
Low noise level.Happy Air system never overcomes 35 dB(A) noise level, a very good result if compared to the traditional, noisy fans.
Activation through switch or presence sensor.Happy Air can be activated through lighting switch or presence sensor and, therefore, can be installed everywhere.
Minimal design and easy installation.Happy Air unites it itself a minimal design, high performances, easy installation and maintenance: these factors mean complete suitability and, then, saving of time and money for the installators and customers.
Technical figures Happy AirTechnical data
Frequency 50 Hz
Voltage 220 V
Active current 0.14 A
Power 31 W
Protection level IP35
Performance data
Noise level < 35 dB(A)
Aspiration capacity 101 m3/h
Maximum suction pressure 340 Pa
Rotating speed 1900 rpm
Flow head350
300
250
200
150
100
50
00 20 40 60 80 100
Pst [Pa]
V [m3/h]
23
Dimensional data
14
5
3
2
105
130(only plate)
50
7575
105
7680
5
5180
225
225
Walls thickness > 105 mm.
1. Fan housing.
2. Covering plate.
3. Electrical fan.
4. Outlet tang.
5. Inlet tang.
80
160 max(with frame)
14
5
3
6
2
280
280
50
Walls thickness from 80 mm to 105 mm.
1. Fan housing.
2. Covering plate.
3. Electrical fan.
4. Outlet tang.
5. Inlet tang.
6. Spacer (optional cod. 601539).
24
Oli74 and Happy Air systemAll Oli74 models can be paired to Happy Air. In order to allow the connection between the systems, the cistern is supplied with a 50 flush pipe with lateral joint.
In order to properly realize the conjunctions between the cistern and the suction system and between the suction system and the ventilation piping, its compulsory using PP, HDPE or PVC pipes.
50 50
max 2 m
50 51
230
230
25
Main pipeline measuringThe main pipeline measuring refers to the following installation projects: the first one presupposes the installation of one single Happy Air system on every flat and the second one, the installation of two Happy Air systems on every flat. The measuring figures are calculated according to the following conditions.
Contemporaneous utilization factor: 100% (all Happy Air systems work at the same time). Vertically installed main pipeline. Constant main pipeline diameter. Outlet residual pressure: 75 Pa. Pipeline roughness: 0.15 mm. Flat height: 2.75 m. Pipeline length up to the roof aerator: 1.50 m. Secondary pipelines, made of DN 80 pipes, are 2 m long and include 2 elbows.
Configuration AThe installation presupposes one Happy Air system, connected on every flat to the main pipeline.
Number of flats (1 Happy Air per flat) 2 4 5 6 6 8 10 12 15
Main pipeline diameter DN [mm] 100 125 140 150 160 180 200 225 250
A similar table can be realized according the PE pipes internal useful diameter.
Maximum number of flats (1 Happy Air per flat) 2 2 5 8 12 15
DE polyethylene main pipeline diameter [mm] 110 125 160 200 250 315
Installation with a single Happy Air on every flat.
151413121110987654321
100 125 140 150 160 180 200 225 250Pipe nominal diameter [mm]
Num
ber
s of
flat
s
26
Configuration BThe installation presupposes two Happy Air systems, both connected on every flat to the main pipeline.
Maximum number of flats (2 Happy Air per flat) 1 2 3 3 4* 4 6* 7 9* 11 13 16
Main pipeline diameter DN [mm] 100 125 140 150 160 180 200 225 250 280 315 355
* Installation presupposes 1 Happy Air system.
A similar table can be realized according the PE pipes internal useful diameter.
Maximum number of flats (2 Happy Air per flat) 2 2 5 8 12 15
DE polyethylene main pipeline diameter [mm] 110 125 160 200 250 315
Layout of connection of the intake systems to the main conduit.
max 2 m
max 1 m
2,75 m
2,75 m max 2 m
The figures are calculated according to contemporaneous utilization factor equal to 100% (all Happy Air system work at the same time).
According to contemporaneous utilization factor changing, its possible changing main pipeline diameter.
In case of need or for encumbrance problems, pipeline splitting is allowed.
DN single pipeline 100 125 140 150 160 180 200 225 250 280 315 355
DN double pipeline 80 100 100 100 125 125 140 160 180 200 225 250
100 125 140 150 160 180 200 225 250 280 315 355
16151413121110987654321
Num
ber
of f
lats
Pipe nominal diameter (mm)
27
The laying and the configuration of the pipes depends on the chosen configuration of the system.
The ventilator connection pipe must be connected to the main pipe, the dimension of which must be calculated beforehand and sized as described in the product handbook.
The connection must be made with 45 branches in order to facilitate expulsion of the inhaled air. The connection can be made directly to the soil stack with primary ventilation, as long as it is higher than the emission points of the discharge networks of the stack.
In the case of waste systems with parallel ventilation, the connection pipe can be connected to the parallel ventilation stack.
75 PEHD 75 PP-TRIPLUS 76 PVC - ABS
50 PEHD 50 PP-TRIPLUS 51 PVC-ABS
PEHD 50
45
67
Figure 1. Connection to the primary ventilation pipe.
PEHD 50
75 PEHD 75 PP-TRIPLUS 76 PVC
50 PEHD 50 PP-TRIPLUS 51 PVC-ABS
45
67
Figure 2. Connection to the secondary ventilation pipe.
28
Installation of ventilator containerThe installation techniques of the ventilator container in the wall or ceiling are indicated in the figure.
2
6
3
4
7
5
13
Figure 3. Wall installation.
2
3
5
4
71
M
Figure 8. Ceiling installation.
1. Main pipe.
2. Connection pipe.
3. Fixing brackets.
4. Ventilator container.
5. Connection sleeve for waste air.
6. Inlet air pipe.
7. Alternative connection points for the inhalation pipe.
M. Install the container correctly so that the air is not inhaled directly from the container.
75 76 80
80 51
50
225
225
105
+290-200
458
576
733-
963
74
80
10-90
40010
120
185
120
29
Oli74 HAPPY AIR
Characteristics Supplied with Oli74 in-wall cistern and Happy Air aspiration system Dual function on a single aspiration fan Reduced noise 100 m3/h Activated by switch or sensor Five minutes delayed switch-off Anti-back flow valve Paintable cover panel Global warranty of 10 years and 2 years on the electronic parts
Included Inner air filter Fixing material Y outlet pipe Electrical fan Fan housing Covering plate Same standard accessories as Oli74
Cod. Thickness Length pipe
601651 80 290-200 332.00
+ 75 76 80
80 51
50
225
225
105
780
750
90
53
990
460
80
10-90
100
180230
0
x
185
120
40010
120
30
Characteristics Supplied with Oli74 Simflex frame and Happy Air aspiration system
Dual function on a single aspiration fan Reduced noise 100 m3/h Activated by switch or sensor Five minutes delayed switch-off Anti-back flow valve Paintable cover panel Global warranty of 10 years and 2 years on the electronic parts
Included Inner air filter Fixing material Y outlet pipe Electrical fan Fan housing Covering plate Same standard accessories as Oli74 Simflex
Oli74 SIMFLEX HAPPY AIR
Cod. Thickness Bend
601951 80 90/90 378.90
40010
120-170 10-90
120
580
1150
0-20
0
230180
3510
0
120
185
120
120
+
75 76 80
80 51
50
225
225
105
31
Characteristics Supplied with Oli74 Sanitarblock and Happy Air aspiration system Dual function on a single aspiration fan Reduced noise 100 m3/h Activated by switch or sensor Five minutes delayed switch-off No-return valve Frame tested for 400 kg load Paintable cover panel Global warranty of 10 years and 2 years on the electronic parts
Included Inner air filter Fixing material Y outlet pipe Electrical fan Fan housing Covering plate Same standard accessories as Oli74 Sanitarblock
Oli74 SANITARBLOCK HAPPY AIR
Cod. Thickness Bend
601854 120 90/110 406.20
In-wall flush cisterns
Flush cisterns to be installed inside the wall and used in combination with floor standing sanitary appliances. Produced with high quality materials, OLI in-wall cisterns are robust, reliable and perfectly adaptable to all available spaces.
OLI flush cisterns are suitable for all rooms thanks to the wide range of available control plates, with an extensive variety of choices both in terms of aesthetics and functionality.
All OLI in-wall cisterns are characterised by a dual flush system, with silent and rapid float valves.
OLI in-wall cisterns are installed and serviced rapidly and easily thanks to simplified access to its internal mechanisms.
34
Thermal insulationThe protective polystyrene layer avoids the undesirable build up of condensation. To facilitate laying of the covering, some models are also available with a netting for the adhesion of glue.
Efficiency in silenceAll OLI in-wall cisterns are equipped with silenced float valves that are certified in class 1 of the NF standard and ensure the cistern is rapidly filled with minimum noise.
OLI puts its float valves through rigorous laboratory tests. In the picture to the right we see a simulation of the flow of water inside the float valve, performed during its functioning.
Facilitated maintenance By removing the control plate rapid accessibility of the cisterns internal components is guaranteed; all the components can be easily removed when and if maintenance is necessary.
Rapid connection to the water supplyConnection to the water supply is simple and fast and does not require the use of tools. The stop valve is found inside the cistern and opening/closing of the same is easily performed by hand.
Water efficiencyAll OLI in-wall cisterns are classified class A in terms of water efficiency and are equipped with dual flush mechanisms for greater water savings.
Installation
35
mm
H
Cistern thickness
Installation height
Control plate position Actuation Pneumatic kit
In compliance with
OLI74
80 1150 Front Mechanical KIWA (NL) SABS (ZA) SAI (AU)
WRAS (UK)
DIAMANTE EVO 330
80 1150 Front Mechanical -
BETTER
120 1150 Front Mechanical -KIWA (NL)
NF (FR) WRAS (UK)
EXPERT EVO
150 820-1150 Front - topCable
Pneumatic Mechanical
NF (FR) SAI (AU)
WRAS (UK)
QUADRA
190 1150 Front Mechanical NF (FR)
74
80 10-90
120
458
576
733-96
3
161-39
1
185
120
40010
36
Cod. Thickness Installation height pipe Actuation
601601 80 1150 56/40-45 Mechanical 69.40
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
4.5/3 litres flush version upon request Ultra compact inlet valve class 1 Pneumatic kit available 80 mm total thickness Supplied with anti-condensation lining and net Cistern certified according to KIWA, SABS, SAI, WRAS Standards
10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Flush pipe
Oli74
8034
419
580
0
max
825
min
665
280
140
40010
37
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
4.5/3 litres flush version upon request Azor inlet valve Pneumatic kit available 80 mm thickness Supplied with anti-condensation lining and net Control plate size 330x190 mm 10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Flush pipe
DiamanteEVO 330
Cod. Thickness Installation height pipe Actuation
600001 80 1150 56/40-45 Mechanical 62.00
415185
120
120
527
max
870
min
650
120
10-90
40010
38
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
Azor Silenced inlet valve class 1 NF certified 120 mm thickness Supplied with anti-condensation lining Cistern certified according to KIWA, NF, WRAS Standards
10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Flush pipe
Better
Cod. Thickness Installation height pipe Actuation
708001 120 1150 56/40-45 Mechanical 84.20
150
120
10-90
40010
0
440R1/2
R1/2
405
max
315
min
70 m
ax 6
45m
in 4
00m
ax 7
20m
in 4
76
R1/2
39
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuator (6/3 - 4.5/3 litres)
4/2 litres flush version upon request Azor Silenced inlet valve class 1 NF certified 150 mm thickness Top or front activation/access Supplied with anti-condensation lining Cistern certified according to NF, SAI, WRAS Standards
10 years warranty
Included Wall pipe fixing support G stop valve Wall fixing kit Protection box Protection sponge Flush pipe Flexible hose L 1250 mm inside pneumatic version Wire L 400 inside cable version
Expert EVO
Cod. Thickness Installation height pipe Actuation
721001 150 820/1150 68/40-45 Cable 81.80
721003 150 820/1150 68/40-45 Mechanical 84.20
721005 150 820/1150 68/40-45 Pneumatic 94.20
R1/2278
187
430
615
0
40010
40
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (6/3 litres)
Compact inlet valve class 1 NF certified Pneumatic kit available 187 mm thickness 270 mm reduced width Corner installation kit Cistern certified according to NF Standard 10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Flush pipe
Quadra
Cod. Thickness Installation height pipe Actuation
720002 187 880/1150 68/40-45 Mechanical 86.80
41
Notes
Simflex installation systems for wall-hung sanitary wares - brick walls
The Simflex installation system is composed of a galvanised sheet metal frame, to be used in masonry walls for the rapid and safe installation of wall-hung sanitary appliances.
The Simflex mounting frame includes different versions designed specifically for the installation of wall-hung WC pans, washbasins, and bidets.
The main advantage of the Simflex system is the possibility of rapidly and safely installing a structure that includes a flush cistern and connection system for wall-hung pans, the type of WC that is becoming increasingly popular in all markets due to the advantages that this system offers in terms of facilitating cleaning operations and occupying less space in the bathroom.
As well as this specific advantage, we can also add the superior characteristics of the OLI cisterns: the wide range of available control plates, the lining for thermal insulation, the quality of the internal components, the silent operation of the float valve, simplified maintenance and the classification in class A of water efficiency.
44
Ease of installation With ease of installation in mind, OLI developed a new protective casing that is fitted to the cistern to offer maximum protection during work on the installation site. The control plate is fitted with bayonet fixing screws, the actuation screws are adjusted by turning them by a quarter of a turn.
Fixing pointsDesigned for installation in masonry walls, the Simflex system is fixed to the wall in six points to facilitate correct application and to strengthen wall fixing if installation is in front of the wall.
Mechanical load resistanceThe frame has holes in couples with interaxis distances of 180 and 230 mm for the positioning of the threaded rods that support the WC to guarantee the combination of all wall-hung pan models on the market with an absolute guarantee of mechanical load resistance.
Accessories suppliedThe Simflex frame to be used with wall-hung sanitary pans includes, as well as the flush cistern, all the accessories required for the complete installation of the system: outlet bend, connection pipe, threaded rods and accessories.
Installation
1000
0
45
mm
H
Built-in installation
On existing wall installation Accessories
Frame thickness
Installation height
Outlet bend diameter
OLI74
80 1150 90/90
DIAMANTE EVO 330
80 1150 90/90
BETTER
120 1150 90/110
EXPERT EVO
150 1150 90/110
BIDET
80 400 50/40
ECO
80 400 -
WASHBASIN
80 800 50/40
46
780
750
120
90
35
1000
635
460
100
185
180230
120
10-90
40010
80
0
Cod. Thickness Installation height Bend Actuation
601901 80 1150 90/90 Mechanical 111.50
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
4.5/3 litres flush version upon request Ultra compact inlet valve class 1 Pneumatic kit available Galvanized frame 80 mm total thickness Cistern certified according to KIWA, SABS, SAI, WRAS Standards
10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Oli74 SIMFLEX
47
280420
140
90
230180
770
35635
1000
100
330
40010
8034
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
4.5/3 litres flush version upon request Azor inlet valve Pneumatic kit available Galvanized frame Control plate size 330x190 mm 80 mm total thickness 10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Diamante EVO 330 SIMFLEX
Cod. Thickness Installation height Bend Actuation
600201 80 1150 90/90 Mechanical 104.10
48
752
635
120
230180
35100
420185
1000
1070
110
40010
120
120 10-90
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
Azor Silenced inlet valve class 1 NF certified Galvanized frame 120 mm thickness Cistern certified according to NF, WRAS, KIWA Standards
10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
BetterSIMFLEX
Cod. Thickness Installation height Bend Actuation
709002 120 1150 90/110 Mechanical 123.90
49
40010
R RR
768
110
230
180
0
35100
1000
402185 R
150 10-90
120
Characteristics Dual flush in-wall cistern compatible with either dual or single cable actuators (6/3 - 4.5/3 litres)
4/2 litres flush version upon request Azor Silenced inlet valve class 1 NF certified Top or front operation Galvanized frame 150 mm thickness Cistern certified according to NF, WRAS, SAI Standards
10 years warranty
Included G stop valve Wall fixing kit Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Expert EVO SIMFLEX
Cod. Thickness Installation height Bend Actuation
721152 150 1150 90/110 Cable 121.50
50
500
420
180-230
185-
250
5080153320
245
6
D50
80/120 (with optional attachments)
40010
Characteristics Frame for wall-mounted bidet Galvanized frame Adjustable attachment plate
Included Fixing material Outlet bend HDPE 40-32/50-40
Bidet SIMFLEX
Cod. Thickness Inlet bend Outlet bend
610010 80 40/32 50/40 79.30
51
570
145
215
330
Eco SIMFLEX
Characteristics Universal frame for wall-hung WC and bidet Quick and easy installation Galvanized sheet iron Anti-corrosion treatment Adjustable in height 10 years warranty
Included Fixing material Two threaded rods 160mm Protection sleeves for the threaded rods White protective caps
Cod. Thickness
618581 80 27.00
52
42080
85010170-280
210-260
70
150
153
76D50
50
345
Characteristics Frame for wall-mounted washbasin Galvanized frame Adjustable attachment plate
Included Fixing material Outlet bend HDPE 40-32/50-40
Washbasin SIMFLEX
Cod. Thickness Inlet bend Outlet bend
611010 80 40/32 50/40 84.20
53
Notes
Sanitarblock installation system for wall-hung sanitary wares
The Sanitarblock mounting frame system is made up of a metal frame with epoxy resin paint, to be fixed to the floor and to the load bearing structures of the plasterboard wall to support the mounting of wall-hung sanitary appliances.
The system includes different structures for the installation of wall-hung WC pans, washbasins, bidets and urinals.
The main advantage of the Sanitarblock system is the possibility of rapidly and safely installing a structure, inside light walls, that includes a flush cistern and connection system for wall-hung pans, the type of WC that is becoming increasingly popular in all markets due to the advantages that this system offers in terms of facilitating cleaning operations and occupying less space in the bathroom.
As well as this specific advantage, we can also add the superior characteristics of the OLI cisterns: the wide range of available control plates, the lining for thermal insulation, the quality of the internal components, the silence of the float valve, simplified maintenance and the classification in class A of water efficiency.
56
Fast fit - rapid and preciseThe Fast Fit system for fixing the Sanitarblock frame to the load bearing walls stands out for its strength and ease of application.
The threaded spindle can be cut according to necessity and is secured by manually turning the screw supplied.
This system also allows the frame to be levelled off by performing a precise final adjustment.
FlexibilityBesides the possibility of turning the outlet bend in order to centre it with the sewer connection, the Sanitarblock system also allows the depth of the outlet bend to be adjusted thus giving greater adaptability in the installation and avoiding compression in the sewer pipes.
The feet of the Sanitarblock frame can be adjusted by up to 200 mm, thus allowing application at the necessary height.
Sanitarblock in light wallsThe Sanitarblock mounting frame system is ready for use within plasterboard wall structures, for the installation of wall-hung pans in light walls. For this application, to secure the structure to the fixing system, self-tapping screws are recommended.
The Sanitarblock system has characteristics of high mechanical resistance in compliance with French Standard NF XP-D12 208 (400 kg).
Accessories suppliedThe Simflex frame to be used with wall-hung sanitary pans includes, as well as the flush cistern, all the accessories required for the complete installation of the system: outlet bend, connection pipe, threaded rods and accessories.
Installation
0max200
min110
0
1000
300
10001000
0
300
300
57
mm
H
Built-in installation
Pre-wall installation
Gypsum/plasterboard wall installation
Accessories Frame thicknessInstallation
heightOutlet bend
diameter
OLI74
120 1150 90-100-110OLI74 S90
90 1150 90-100-110DIAMANTE EVO 330
120 1150 90-100-110BETTER
120 1150 110EXPERT EVO
150 820-8801130 110QUADRA
190 1150 110BIDET
80 350-505 820-880 50/40WASHBASIN
80 820-950 50/40WC
80 350 110URINAL
80 1300 50/40
185580
1150
0-20
0
120
90/110
230180
3563
5
100
120
40010
120
10-90120-170
58
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres) 4.5/3 litres flush version upon request Ultra compact inlet valve class 1 Pneumatic kit available Painted tubular frame 120 mm thickness Adjustable outlet bend Frame tested for 400 kg load Height adjustable from 0 to 200 mm Cistern certified according to KIWA - SABS - SAI WRAS Standards 10 years warranty
Included G stop valve Brackets for the pre-wall fixing included Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Oli74 SANITARBLOCK
Cod. Thickness Installation height Bend Pre-wall fixing Actuation
601801 120 1150 90/90 Fast Fit Mechanical 143.70
601804 120 1150 90/110 Fast Fit Mechanical 143.70
R1/2
500185
230
18035
100
635
0
90
40010
1110
120
1000
320
90/100/1100-150
120
10-90
59
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7.5/3 - 6/3 litres) 4.5/3 litres flush version upon request
Ultra compact inlet valve class 1 Pneumatic kit available Painted tubular frame 90 mm thickness Adjustable outlet bend Frame tested for 400 kg load Height adjustable from 0 to 150 mm Certified cistern according to KIWA - SABS - SAI - WRAS Standards 10 years warranty
Included G stop valve Brackets for the pre-wall fixing included Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Rubber seal adapter: from 90 to 100-110 Outlet bend L 400 mm
Oli74 S90 SANITARBLOCK
Cod. Thickness Installation height Bend Pre-wall fixing Actuation
601803 90 1150 90/90-100-110 Brackets Mechanical 178.40
280
120-170500
90/100/110
1150
635
1000
3510
0
0-20
0
230180
83
140
120
40010
60
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
4.5/3 litres flush version upon request Azor inlet valve Pneumatic kit available Painted tubular frame Control plate 330x190 mm 120 mm thickness Adjustable outlet bend Frame tested for 400 kg load Height adjustable from 0 to 200 mm 10 years warranty
Included G stop valve Brackets for the pre-wall fixing included Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Rubber seal adapter from 90 to 100-110 Outlet bend
Diamante EVO 330 SANITARBLOCK
Cod. Thickness Installation height Bend Pre-wall fixing Actuation
600101 120 1150 90/90-100-110 Fast Fit Mechanical 140.00
600105 120 1150 90/110 Fast Fit Mechanical 140.00
500185
1150
0-20
0
110
35
230180
100
10006
35
120-170
10-90
120
61
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
Azor Silenced inlet valve class 1 NF certified Painted tubular frame 120 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 200 mm Cistern certified according to NF - KIWA - WRAS standards 10 years warranty
Included G stop valve Brackets for the pre-wall fixing included Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Better SANITARBLOCK
Cod. Thickness Installation height Bend Pre-wall fixing Actuation
708702 120 1150 90/110 Fast Fit Mechanical 158.60
0110
400185 R
RR
230180
820-880
743-803
35100
400185 R
RR
230180
110
0-200
1000
35
1130
150-200
20-90
120
40010
0
100
150-21020-90
120
40010
62
Characteristics Dual flush in-wall cistern (6/3 - 4.5/3 litres) 4/2 litres flush version upon request Azor Silenced inlet valve class 1 NF certified Top or front operation Painted tubular frame 150 mm thickness Adjustable outlet bend Frame tested for 400 kg load Height adjustable from 0 to 200 mm Cistern certified according to NF - WRAS - SAI Standards
10 years warranty
Included G stop valve Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Expert EVO SANITARBLOCK
Cod. Installation height Bend Pre-wall fixing Actuation
721702 820 90/110 Brackets Cable 156.10
721752 880 90/110 Brackets Cable 156.10
721802 1130 90/110 Fast Fit Cable 156.10
721705 820 90/110 Brackets Pneumatic 168.40
721755 880 90/110 Brackets Pneumatic 168.40
721805 1130 90/110 Fast Fit Pneumatic 168.40
721703 820 90/110 Brackets Mechanical 158.60
721753 880 90/110 Brackets Mechanical 158.60
721803 1130 90/110 Fast Fit Mechanical 158.60
300185
136
190-240
10-90
120
180115
0
35
1000
635
100
0-20
0
335
670,43
63
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres)
Compact inlet valve class 1 NF certified Pneumatic kit available Painted tubular frame Frame tested for 400 kg load Height adjustable from 0 to 200 mm Frame kit for angle installations Certified according to NF Standard 10 years warranty
Included G stop valve Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Quadra SANITARBLOCK
Cod. Installation height Bend Pre-wall fixing Actuation
722019 1150 90/110 Fast Fit Mechanical 161.10
719183 Frame kit for angle installations. 18.00
500
80-120165-323230
464
350
172
0-15
0
115-273180
0
41010
42080-120230
180
45-98
75-275308
505
64
Characteristics Painted tubular frame 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 150 mm
Included Brackets for the pre-wall fixing included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection (except Easy version)
Bidet SANITARBLOCK
Cod. Version Inlet bend Outlet bend Height Fittings Width
714501 40/32 50/40 350 500 114.00
618547 Easy 40/32 50/40 505 420 86.80
500 80-120
230
820-
880
0-20
075
0
115-273
148
0
x
165-323
180
43
50
56
410 +20-10
65
Characteristics Painted tubular frame 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 200 mm
Included Brackets for the pre-wall fixing included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection
Bidet SANITARBLOCK
Cod. Inlet bend Outlet bend Height Fittings Pre-wall fixing Width
714552 40/32 50/40 820 G Fast Fit 500 114.00
714602 40/32 50/40 880 G Fast Fit 500 114.00
500 80
320 77
154
0
820
750
95
310-48
0
0-20
0
62-365
420 80-120165-280
75-275
45-98
950
308
66
Characteristics Painted tubular frame 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 200 mm
Included Brackets for the pre-wall fixing included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection (except Easy version)
Washbasin SANITARBLOCK
Cod. Version Inlet bend Outlet bend Height Fittings Pre-wall fixing Width
715002 40/32 50/40 820 Fast Fit 500 116.40
611212 Easy 40/32 50/40 950 Brackets 420 96.60
404
350
0-200
500
230
180
35
100
0
120-190
110
40010
67
Characteristics Painted tubular frame 120 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 200 mm Adjustable outlet bend
Included Brackets for the pre-wall fixing included Fixing material Rubber seal adapter: from 90 to 100-110 Supplied with inlet and outlet pan connection Outlet bend
Wc SANITARBLOCK
Cod. Height Width Bend
714001 350 500 90/90-100-110 96.60
500
1140
-130
0
1000
120
0
200
50
80 min
650
68
Characteristics Tubular frame cataphoresis Adjustable attachment plate 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 200 mm
Included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection
Optional Electronic in-wall cod. 718101 External urinal faucet with timer cod. 718001
Urinal SANITARBLOCK
Cod. Height Bend Fittings Width
715602 1300 50/40 500 159.00
Notes
69
Sanitarblock installation systemsfor wall-hung sanitary wares - free standing
The OLI Sanitarblock free-standing mounting frame system is composed of metal frames covered with epoxy resin paint, to be secured to the floor only for the installation of wall-hung pans inside light walls.
The Sanitarblock free-standing installation system includes frames for wall-hung WC pans, washbasins and bidets.
The main advantage of the Sanitarblock Free-standing system is the possibility of rapidly and safely installing a structure, without the necessity of any type of wall, that includes a flush cistern and connection system for wall-hung pans, the type of WC that is becoming increasingly popular in all markets due to the advantages that this system offers in terms of facilitating cleaning operations and occupying less space in the bathroom.
As well as this specific advantage, we can also add the superior characteristics of the OLI cisterns: the wide range of available control plates, the lining for thermal insulation, the quality of the internal components, the silence of the float valve, simplified maintenance and the classification in class A of water efficiency.
72
High resistanceThe feet of the Sanitarblock Free-standing structure are designed so that the structure offers good resistance when secured to the floor only: in particular, load resistance is guaranteed in compliance with the French Standard NF XP-D12 208 (400 kg).
FlexibilityBesides the possibility of turning the outlet bend in order to centre it with the sewer connection, the Sanitarblock system also allows the depth of the outlet bend to be adjusted thus giving greater adaptability in the installation and avoiding compression in the sewer pipes.
Furthermore, these frames are equipped with metal sleeves and are adjustable in height up to 150 mm, thus enabling a safe application for all requirements.
Accessories suppliedThe Simflex frame to be used with wall-hung sanitary pans includes, as well as the flush cistern, all the accessories required for the complete installation of the system: outlet bend, connection pipe, threaded rods and accessories.
Installation
73
mmH
Gypsum/plasterboard wall
installationAccessories Frame thickness Installation height Outlet bend diameter
OLI74
180 1150 110
BIDET
180 350-820 50/40
WASHBASIN
180 880 50/40
580185
1150
0-15
0
35
100
1000635
230
180
180
40010
10-90
120
74
Characteristics Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 litres) 4.5/3 litres flush version upon request Ultra compact inlet valve class 1 Pneumatic kit available Painted tubular frame 120 mm thickness Adjustable outlet bend Frame tested for 400 kg load Height adjustable from 0 to 150 mm Certified according to KIWA - SABS - SAI WRAS Standards 10 years warranty
Included G stop valve Brackets for the pre-wall fixing included Fixing material Protection box Protection sponge Supplied with inlet and outlet pan connection Outlet bend
Oli74 SANITARBLOCK FREE STANDING
Cod. Thickness Installation height Bend
601824 180 1150 90/110 175.90
500
230
0
180
410
172
750
820
0-15
0
180165-323
115-273
+20-10
75
Characteristics Painted tubular frame 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 150 mm
Included Brackets for the pre-wall fixing included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection
Bidet SANITARBLOCK FREE STANDING
Cod. Inlet bend Outlet bend Thickness Height Fittings Width
714902 40/32 50/40 180 820 G 500 146.20
500
320
77
154
880
0-15
081
0
360-53
0155
60
62-365
180
0
76
Characteristics Painted tubular frame 80 mm thickness Frame tested for 400 kg load Height adjustable from 0 to 150 mm
Included Brackets for the pre-wall fixing included Fixing material Outlet bend 40 - 32/50 - 40 Two G fittings for tap connection
Washbasin SANITARBLOCK FREE STANDING
Cod. Inlet bend Outlet bend Thickness Height Fittings Width
715402 40/32 50-40 180 880 G 500 148.60
Notes
77
Control plates
With a modern and attractive design, the range of OLI control plates add the final touch to all bathrooms, in keeping with the latest trends in interior design.
All of the OLI plates offer dual flush activation, for the good of the environment in which we live, thus contributing to the reduction of water wastage and reducing consumption costs.
The range of OLI plates includes pneumatic, mechanical, electronic and wire activation systems. Made of thermoplastic, metal or glass, the OLI plates offer an elevated resistance to knocks and scratches.
As well as the traditional finishes in white, polished and matt chrome, some of the plates in the OLI range are available in special versions with a soft touch finish, which are pleasant to the touch, offer maximum cleanliness as well as an elegant design.
80
iPLATE INO-X 01 INO-X 02 INO-X 03 INO-X 04 INO-X 05 INO-X 06 SLIM
OLI74
DIAMANTE EVO 330
BETTER
EXPERT EVO PNEU
EXPERT EVO CABLE
EXPERT EVO MECHANICAL
QUADRA
81
RIA RIVER DUAL METAL DUAL STREAMCLASSIC
DUAL DUAL ORIENT KIT PNEU SALINA KARISMA
Cod. 601527
Cod. 556806
Cod. 556807
Cod. 601527
82
TRENDMONO TREND SPHERA + SPHERA - MINI TREND
83
iPlate: a world of infinite combinations
With a simple gesture can replace buttons iPlate according to their own style.
84
iPlateThe new control plate, iPlate, for in-wall flush cisterns unites functionality, practicality, performance, design and... creativity, with an infinite number of combinations and possibilities.
Available in a wide range of colours, iPlate becomes the expression of ones own personal style inside the bathroom thanks to the possibility of replacing the control buttons, creating infinite colour combinations with the buttons/plates. Replacement is simple and rapid.
iPlate proposes two different button kits, Elegance or Fantasy, to bring the bathroom in line with the users own personal style. The refined soft touch finish, available in white or black, gives the plate a look of exclusivity and appeal.
Kit elegance
Kit fantasy
85
With a simple gesture can replace buttons iPlate according to their own style.
240
6
150
86
Cod. Finishing Actuation
670001 White Mechanical 33.40
670002 Anthracite Mechanical 45.90
670003 Purple Mechanical 45.90
670004 Polished chrome Mechanical 51.50
670005 Black soft touch Mechanical 84.20
670006 Satin chrome Mechanical 54.60
670007 Red Mechanical 45.90
670008 White soft touch Mechanical 84.20
Characteristics Suitable for Oli74, Better, Quadra, mechanical Expert EVO
Dual flush Soft-touch finishing available Actuation force
87
Kit iPlate
Cod. Finishing
670051 Purple - Black soft touch - Red - White - Polished chrome 28.80
Kit fantasy
Cod. Finishing
670052 Black soft touch - Anthracite - Polished chrome Satin chrome - White soft touch 37.90
Kit elegance
88
Ino-xThe Ino-x line of plates was created thanks to the collaboration with Italian Architect Romano Adolini, an influential name in bathroom design.
Ino-x was designed with the aim of conferring a mark of distinctiveness and a significant eye-catching design to an essentially technical element.
The result is a discreet, elegant and visually striking object: A simple sheet of steel, just 2 mm thick, with a clean laser cut. This philosophy generated a range of six models, all characterised by clean lines, using only pure shapes such as the square and circle.
The same forms were applied to the single central button which, with a swinging movement, allows for two flushing modes. A pictogram with the + and - signs, created by laser engraving, allows easy identification of the quantity of water to be used.
Very easy to install and compatible with the cisterns in the Oli74 range, Ino-x is available in satin or polished stainless steel with an anti-touch finish.
89
215
2
145
90
Cod. Finishing Actuation
660001 Polished chrome Mechanical 168.50
661001 Satin chrome Mechanical 173.00
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
215
145
2
91
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
215
215
2
92
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
215
215
2
93
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
245
2
94
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
245
2
95
Characteristics Suitable for Oli74 Dual flush Anti-touch finishing Actuation force
255
150
6,5
96
Characteristics Suitable for Oli74, Better, Quadra, mechanical Expert EVO
Dual flush Soft-touch model Actuation force
246
160
17
97
Characteristics Suitable for Oli74, Better, Quadra, mechanical Expert EVO
Dual flush Actuation force
245
165
19
98
Characteristics Suitable for Oli74, Better, Quadra, mechanical Expert EVO
Dual flush Actuation force
243
163
17
99
Characteristics Suitable for Oli74, Better, Quadra, mechanical Expert EVO
Dual flush Actuation force
215
145
1017
63.5
100
Characteristics Suitable for Oli74, pneumatic Expert EVO Dual flush Soft-touch model Actuation pressure
230
146
10
63.5
101
Characteristics Suitable for Oli74 pneumatic Expert EVO Dual flush Soft-touch model Actuation pressure < 20N ABS material 10 mm thickness Oli74 require the proper pneumatic conversion kit 2 years warranty
Included Two back-plate fixing screws Back-plate
Karisma
Cod. Finishing Actuation
641001 White Pneumatic 28.50
641004 Polished chrome Pneumatic 39.70
641006 Satin chrome Pneumatic 42.20
641015 Black soft-touch Pneumatic 66.90
641017 Black soft-touch - polished chrome push buttons Pneumatic 66.90
641019 Polished chrome - black soft-touch push buttons Pneumatic 66.90
215
145
49.52
102
Characteristics Suitable for Oli74, pneumatic Expert EVO Actuation pressure
330
190
30
103
Characteristics Suitable for Diamante EVO 330 Dual flush Actuation force
190
325 14
104
Characteristics Suitable for Diamante EVO 330 cisterns Dual flush Actuation force
310
190
35
105
Cod. Finishing Actuation
635161 White Mechanical 19.00
Characteristics Suitable for Diamante EVO 330 cisterns Dual flush Actuation force
215
145
8
106
Characteristics Cable operation control plate suitable for Expert EVO cable cistern
Dual flush Actuation force
107
Cod.
601038 12.00
Characteristics Mechanic conversion kit for Expert EVO cistern
Compatible with all mechanical plates
Included Mechanical anchors Levers
MECHANICAL CONVERSION KIT
Cod. Air hose
601527 15.71
Characteristics Dual flush pneumatic kit for Oli74 Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support
PNEUMATIC CONVERSION KIT
108
Cod. Air hose
556807 17.30
Characteristics Dual flush pneumatic kit for Expert EVO Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support
PNEUMATIC CONVERSION KIT
Cod. Air hose
556806 17.30
Characteristics Dual flush pneumatic kit for Diamante EVO Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support Pneumatic central block
109
Cod. Colour Air hose Corrugated pipe
605001 White 12.09605004 Polished chrome 16.47
Characteristics Hand-operated pneumatic in-wall push buttons
ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm In-wall box
Cod. Colour Air hose Corrugated pipe
718063 White 16.96
Characteristics Hand-operated pneumatic in-wall push buttons
ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm In-wall box
PNEUMATIC ACTUATORS
90
6
0
60 20
105
60 18 20
6
0
110
PNEUMATIC ACTUATORS
Cod. Colour Air hose Protective pipe
605101 White 14.28605104 Polished chrome 22.22
Characteristics Hand-operated pneumatic push buttons for external wall installation
ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Aesthetic covering pipe L. 1500 mm
Cod. Air hose Corrugated pipe
605201 43.92
Characteristics Foot-operated pneumatic floor-mounted push button
INOX material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
1000
10
110 65
120
120
60
2015
60
111
PNEUMATIC ACTUATORS
Cod. Air hose Corrugated pipe
605301 63.11
Characteristics Foot-operated pneumatic wall-mounted push button
INOX material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
110
160
85
Cod. Colour Air hose Corrugated pipe
605254 Polished chrome 37.22605256 Satin chrome 47.54
Characteristics Metal control plate with push button for single flush
INOX material Single flush Compatible with all OLI pneumatic cisterns To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material Pneumatic flexible hose L.2500 mm Corrugated pipe L.2500 mm In-wall box
MONO TREND
492
85
85
112
PNEUMATIC ACTUATORS
Cod. Colour Air hose Corrugated pipe
605264 Polished chrome - - 26.24
605266 Satin chrome - - 33.43
Characteristics Pneumatic in-wall push button for total flush ABS material Single flush Compatible with all OLI pneumatic cisterns To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material
Cod. Colour Air hose Corrugated pipe
605274 Polished chrome - - 28.21
605276 Satin chrome - - 35.71
Characteristics Pneumatic in-wall push button for partial flush ABS material Single flush Compatible with Oli74, Expert Evo, Diamante EVO and Quadra flush cisterns
To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material
SPHERA +
SPHERA -
48
48
113
INSPECTION PLATES
Cod. Colour Size
640984 Polished chrome 245x165 62.89
640986 Satin chrome 245x165 73.73
Characteristics Inspection plate for Oli74, Expert Evo, Quadra pneumatic concealed cisterns
Metal inspection plate
Included Fixing material Back-plate
Cod. Colour Air hose Corrugated pipe
605294 Polished chrome 66.23605296 Satin chrome 83.28
Characteristics Metal control plate with two push buttons for dual flush
Compatible with Oli74, Expert Evo and Diamante EVO flush cisterns
INOX material For light walls installations only In wall box for brickwalls installation (available upon request)
Included Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
MINI TREND
PNEUMATIC ACTUATORS
492
85
155
243
163
14
114
INSPECTION PLATES
Cod. Colour Size
604901 White 245x165 18.48
604904 Polished chrome 245x165 29.32
604906 Satin chrome 245x165 32.54
Characteristics Inspection plate for Oli74, Expert EVO, Quadra, pneumatic concealed cisterns
ABS inspection plate
Included Fixing material Back-plate
243
163
14
Cod. Colour Size
605501 White 330x190 6.07
605504 Polished chrome 330x190 9.91
605506 Satin chrome 330x190 12.09
Characteristics Inspection plate for Diamante Evo 330 pneumatic concealed cistern
ABS inspection plate
Included Fixing material
330
190
14
115
Notes
Exposed flush cisterns
These are flush cisterns made with a bright thermoplastic material with an elevated resistance to knocks and scratches.
The exposed cisterns are classified into 3 types, according to their positioning over the ceramic pan.
Close-coupled: these are fitted directly onto the ceramic pan and are ideal when replacing ceramic cisterns.
Medium to low position, installed at a maximum height of one meter, hooked to the wall using the back-pack system.
High position, activated by chain or a pneumatic button that can also be combined with in-wall flush pipes.
Some models in the range are available in a wide choice of colours, as well as the traditional bright white. The wide range of OLI exposed cisterns is equipped with a fast and silent float valve with different water connection possibilities.
118
Close-couple
Low/medium
levelHigh level
Pneumatic conversion
kit
Colours range
Single flush
Dual flush
In compliance
withONIX
TOPAZIO
DIN (DE)KIWA (NL)SMERALDO
DIN (DE)AMBRA
HAVANA
GEMMA
PANAMA
HIVORY
ZAFFIRO
TURCHESE
DIN (DE)OLISTYLE
RUBINO
340
415
210 13750
600-65
0x
340137
415
119
Characteristics Dual flush exposed tank (7/3.5 - 6/3 litres) Ultra compact inlet valve class 1 Internal anti condensation lining 137 mm thickness Close-couple conversion kit 3 position water supply connection 5 years warranty
Included Fixing material G stop valve Flush pipe
Onix
Cod. Flush Pipe Stop valve Water connection
341201 Dual 50/40 47.10
493604 Close-couple conversion kit. 4.46
135
266/344
445
400
530-58
0x
120
Characteristics Exposed tank available with single (9/6 litres) or dual (9/4.5 - 6/3 litres) flush mechanism
Jolly silenced inlet valve class 1 NF certified Pneumatic kit available Internal anti condensation lining 135 mm thickness 3 positions water supply connection Certified cistern according to KIWA, DIN Standards
5 years warranty Colored version: see page 131
Included Fixing material Flush pipe
Topazio
Cod. Flush Pipe Stop valve Water connection
411201 Single 50/40 38.70
416201 Dual 50/40 42.90
416501 Dual 50/40 - 37.20
416941 Dual 50/40 52.60
600-
650 1250
+50 -50
XX
380
240
445140
121
SmeraldoCharacteristics
Exposed tank available with single (9/6 litres) or dual (7/3.5 - 6/3 litres) flush mechanism
Jolly silenced inlet valve class 1 NF certified Internal anti condensation lining 140 mm thickness 3 positions water supply connection Certified cistern according to DIN Standards 5 years warranty
Included Fixing material Flush pipe
Cod. Flush Pipe Stop valve Water connection
401201 Single 50/40 33.00
401501 Single 50/40 - 27.30
401941 Single 50/40 45.40
407201 Dual 50/40 35.70
407501 Dual 50/40 - 30.00
445 140
45
50
240
370
max
945
122
Cod. Flush Pipe Stop valve Water connection
407251 Dual 50/40 38.80
AmbraCharacteristics
Dual flush exposed tank (7/3.5 - 6/3 litres) Jolly silenced inlet valve class 1 NF certified Internal anti condensation lining 140 mm thickness 3 positions water supply connection Certified cistern according to DIN Standards 5 years warranty
Included G stop valve Flush pipe
400280 160
435
650
50x
123
Characteristics Dual flush exposed tank (6/3 litres) Jolly silenced inlet valve class 1 NF certified Internal anti condensation lining Adjustable side water connection 160 mm thickness 3 positions water supply connection Certified cistern according to DIN Standards No-cigarettes lid 5 years warranty
Included Fixing material G stop valve Flush pipe
Havana
Cod. Flush Pipe Stop valve Water connection
386201 Dual 50/40 52.10
130
408
456
240
600-65
0X
124
Characteristics Flush cistern, with start-stop button (7/6 litres) Internal anti condensation lining 130 mm thickness Flush volume can be settled by adjusting the float valve
5 years warranty
Included Fixing material Flush pipe
Gemma
Cod. Flush Pipe Stop valve Water connection
461201 Single 50/40 28.80
461501 Single 50/40 - 23.60
130
580
- 5
0
260
440
360
+ 5
0
125
Characteristics Flush cistern, with start-stop button (7/6 litres) 130 mm thickness Flush volume can be settled by adjusting the float valve
5 years warranty
Included Fixing material Water connection kit Flush pipe
Hivory
Cod. Flush Pipe Stop valve Water connection
466501 Single 50/40 - 21.10
130
50
270
440
360
126
Characteristics Flush cistern, with start-stop button (7/6 litres) Internal anti condensation lining 130 mm thickness Flush volume can be settled by adjusting the float valve
5 years warranty
Included Fixing material Water connection kit Flush pipe
Panama
Cod. Flush Pipe Stop valve Water connection
361501 Single 50/40 - 23.60
160403
407
321
127
Characteristics Dual flush exposed tank (9/4.5 - 6/3 litres) Jolly silenced inlet valve class 1 NF certified Pneumatic kit available Internal anti condensation lining 160 mm thickness 3 positions water supply connection 5 years warranty Colored version: see page 131
Included Fixing material G stop valve
Zaffiro CLOSE COUPLED
Cod. Flush Pipe Stop valve Water connection
425201 Dual - 49.50
425741 Dual - 59.20
450240
145
380
x20
25+50
-5
128
Characteristics High level exposed tank with single flush chain (9-6 litres)
Jolly silenced inlet valve class 1 NF certified Pneumatic kit available Internal anti condensation lining 145 mm thickness Without flushing pipe 5 years warranty
Included Fixing material
Turchese
Cod. Flush Lid Stop valve Water connection
440201 Single 34.00
440051 Single - 28.80
440401 Single - 30.80
440351 Single - - 25.60
450240
145
380
x20
25+50
-5
450240
145
380
x
129
Characteristics Exposed 9 litres cistern with hand-operated push button (for low/medium level installation) or wire (for high level)
145 mm thickness Flush volume can be settled by adjusting the float valve
5 years warranty
Included Fixing material D 32 flushing pipe 1850 mm length 50-32 adapter
Olistyle
Cod. Flush Lid Stop valve Water connection
440141 Single - 27.30
2005
- 10
240445
320
+ 5
140
130
Characteristics High level exposed tank with single flush chain (9-6 litres)
Flush volume can be settled by adjusting the float valve
Without flushing pipe 140 mm thickness 5 years warranty
Included Fixing material
Rubino
Cod. Flush Lid Stop valve Water connection
441551 Single - - 19.90
131
Cod. Flush Colour Pipe Stop valve Water connection
416203 Dual Champagne 50/40 47.80
416205 Dual Manhattan grey 50/40 47.80
416211 Dual Visone beige 50/40 47.80
416215 Dual Pink 50/40 47.80
Topazio COLOURED FLUSH CISTERNS
Cod. Flush Colour Pipe Stop valve Water connection
420211 Single Visone beige - 54.60420213 Single Pergamon - 54.60420215 Single Pink - 54.60420743 Single Champagne - 58.30
420745 Single Manhattan grey - 58.30
420751 Single Visone beige - 58.30
420753 Single Pergamon - 58.30
425203 Dual Champagne - 56.00
Discontinued.
Zaffiro COLOURED FLUSH CISTERNS
Pneumatic flush cisternsconversion kits and remote actuators
In-wall and exposed flush cisterns, combined with reliable and precise pneumatic activation systems, plates and buttons.
These systems that make use of air pressure for activation are suitable both for functional and aesthetical solutions, given that the plates dont need to be positioned near the flush cistern with the possibility of activating the flush at a distance of up to 2.5 metres.
The limited pressure necessary for flush activation makes pneumatic plates and systems particularly suitable for use by children and disabled.
Pneumatioc cistern
Pneumatic conversion kit
TOPAZIO
Cod. 520800
ZAFFIRO
Cod. 520800
TURCHESE
Cod. 520800
OLI74
Cod. 601527
DIAMANTE EVO 330
Cod. 556806
EXPERT EVO PNEU
Cod. 556807
QUADRA
Cod. 601527
134
MONO TREND SPHERA + SPHERA - MINI TREND
135
580
400
445266/344 135
+ 5
0-
50
+ 5
0-
5012
50
X X
+ 5
- 10
2005
136
Characteristics Single flush pneumatic actuated (9-6 litres) Jolly silenced inlet valve class 1 NF certified Both pneumatic and mechanic actuated Internal anti condensation lining 135 mm thickness 3 positions water supply connection 5 years warranty
Included Fixing material Flush pipe
Topazio PNEUMATIC
Cod. Level Pipe Stop valve Actuator Water connection
411721 Low and medium 50/40 52.80
411771 Low and medium 50/40 54.60
411791 Low and medium 50/40 - 48.90
411781 Low and medium 50/40 - 42.40
413781 High - - 40.90
570
+70
20
1330
+
20
-400
X X
400280 160
410
137
Characteristics Single flush pneumatic actuated (9-6 litres) Jolly silenced inlet valve class 1 NF certified Both pneumatic and mechanic actuated Internal anti condensation lining 160 mm thickness 3 positions water supply connection 5 years warranty
Included Fixing material Flush pipe
Zaffiro PNEUMATIC
Cod. Level Pipe Stop valve Actuator Water connection
434201 Low and medium 50/40 65.70
434251 Low and medium 50/40 67.50
434881 Low and medium 50/40 - - 50.30
380
X
450240
145
2025
+ 5
0-5
138
Characteristics Single flush pneumatic actuated (9-6 litres) Jolly silenced inlet valve class 1 NF certified Internal anti condensation lining 145 mm thickness Without flushing pipe Certified according to DIN 19542 Standards 2 positions water supply connection 5 years warranty
Included Fixing material
Turchese PNEUMATIC
Cod. Level Pipe Stop valve Actuator Water connection
440521 High - 48.90
440251 High - 50.80
440881 High - - - 32.80
139
Cod. Actuator Air hose Colour
520800 - - 20.31500951 White 34.59
Charatteristics Single flush pneumatic outlet valve for Topazio, Zaffiro and Turchese cisterns
Compatible with single flush push buttons
Included Pneumatic flexible hose L.2500 mm included
PNEUMATIC CONVERSION KIT
Cod. Air hose
601527 15.71
Characteristics Dual flush pneumatic kit for Oli74 Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support
140
PNEUMATIC CONVERSION KIT
Cod. Air hose
556807 17.30
Characteristics Dual flush pneumatic kit for Expert EVO Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support
Cod. Air hose
556806 17.30
Characteristics Dual flush pneumatic kit for Diamante EVO Compatible with all flush push buttons Compatible with all pneumatic plates
Included Pneumatic flexible hose L. 300 mm Pneumatic anchors Pneumatic support Pneumatic central block
141
Cod. Colour Air hose Corrugated pipe
605001 White 12.09605004 Polished chrome 16.47
Characteristics Hand-operated pneumatic in-wall push buttons ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm In-wall box
Cod. Colour Air hose Corrugated pipe
718063 White 16.96
Characteristics Hand-operated pneumatic in-wall push buttons ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm In-wall box
PNEUMATIC ACTUATORS
90
6
0
60 20
105
60 18 20
6
0
142
PNEUMATIC ACTUATORS
Cod. Colour Air hose Protective pipe
605101 White 14.28605104 Polished chrome 22.22
Characteristics Hand-operated pneumatic push buttons for external wall installation
ABS material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Aesthetic covering pipe L. 1500 mm
Cod. Air hose Corrugated pipe
605201 43.92
Characteristics Foot-operated pneumatic floor-mounted push button
INOX material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
1000
10
110 65
120
120
60
2015
60
143
PNEUMATIC ACTUATORS
Cod. Air hose Corrugated pipe
605301 63.11
Characteristics Foot-operated pneumatic wall-mounted push button
INOX material Single flush Compatible with all OLI pneumatic cisterns
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
110
160
85
Cod. Colour Air hose Corrugated pipe
605254 Polished chrome 37.22605256 Satin chrome 47.54
Characteristics Metal control plate with push button for single flush INOX material Single flush Compatible with all OLI pneumatic cisterns To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm In-wall box
MONO TREND
492
85
85
144
PNEUMATIC ACTUATORS
Cod. Colour Air hose Corrugated pipe
605264 Polished chrome - - 26.24
605266 Satin chrome - - 33.43
Characteristics Pneumatic in-wall push button for total flush ABS material Single flush Compatible with all OLI pneumatic cisterns To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material
Cod. Colour Air hose Corrugated pipe
605274 Polished chrome - - 28.21
605276 Satin chrome - - 35.71
Characteristics Pneumatic in-wall push button for partial flush ABS material Single flush Compatible with Oli74, Expert Evo, Diamante EVO and Quadra flush cisterns
To adopt in combination with exposed cisterns requires cod. 622827
Included Fixing material
SPHERA +
SPHERA -
48
48
145
INSPECTION PLATES
Cod. Colour Air hose Corrugated pipe
605294 Polished chrome 66.23605296 Satin chrome 83.28
Characteristics Metal control plate with two push buttons for dual flush
Compatible with Oli74, Expert Evo and Diamante EVO flush cisterns
INOX material For light walls installations only In wall box for brickwalls installation (available upon request)
Included Pneumatic flexible hose L. 2500 mm Corrugated pipe L. 2500 mm
MINI TREND
PNEUMATIC ACTUATORS
492
85
155
Cod. Colour Size
640984 Polished chrome 245x165 62.89
640986 Satin chrome 245x165 73.73
Characteristics Inspection plate for Oli74, Expert Evo, Quadra pneumatic concealed cisterns
Metal inspection plate
Included Fixing material Back-plate
243
163
14
146
INSPECTION PLATES
Cod. Colour Size
604901 White 245x165 18.48
604904 Polished chrome 245x165 29.32
604906 Satin chrome 245x165 32.54
Characteristics Inspection plate for Oli74, Expert EVO, Quadra, pneumatic concealed cisterns
ABS inspection plate
Included Fixing material Back-plate
243
163
14
Cod. Colour Size
605501 White 330x190 6.07
605504 Polished chrome 330x190 9.91
605506 Satin chrome 330x190 12.09
Characteristics Inspection plate for Diamante Evo 330 pneumatic concealed cistern
ABS inspection plate
Included Fixing material
330
190
14
Notes
147
Universal mechanismsfor vitreous china cisterns
OLI is a leading European producer of mechanisms for ceramic cisterns and its quality is recognised by the most important international bodies.
The extremely silent float valves and the elevated performance levels of our products are tested under strict conditions inside the laboratory.
Many of the biggest producers of sanitary appliances have chosen the quality of OLI outlet and float valves, confirmation of their reliability and the wide range of articles that allows different solutions to be proposed for the most varied production requirements.
This position of market leader, earned due to the continuous perfectioning of already top-performing systems, is however, not enough for OLI.
Indeed, every day new products are created to meet the requirements of the international markets in which OLI operates and which are destined to become widely used solutions: Azor Plus, the float valve, is one such example, a demonstration of the commitment of OLI to reduce water consumption.
150
Azor PlusOLI has enhanced its range of float valves with Azor Plus, a product that has been appropriately defined as offering delayed filling and back-pressure operation. The most important characteristic of Azor Plus is the possibility of saving half a litre of water at each flush. While a traditional valve, following a flush, immediately starts refilling the cistern, with Azor Plus filling is delayed by a few seconds, to make sure that the outlet valve has sufficient time to return to its closed position.
In this way, water efficiency is significantly increased; if we calculate an average of twenty flushes per day on two cisterns installed in a four-person flat, this results in a daily savings of 10 litres and 3650 litres per year.
Azor Plus can be installed in any type of cistern, both in-wall and exposed, and also in ceramic cisterns with connection at the side or below and it complies with WRAS and NF standards. According to the worldwide important French standard, the valve is certified in acoustic class 1 with a peak pressure resistance up to 20 bar. The compact dimensions of Azor Plus allow it to be easily and quickly assembled with a 3/8 connection and the possibility to carry out any necessary maintenance and internal cleaning of the float easily and rapidly.
151
Float mechanism in the closed position
Save up to
for day
10Litres
Full flush
During flushing, the inlet of water into the cistern is completely inhibited.
Once the flush has been completed, the outlet valve closes off the outflow of water and the float valve starts filling.
Half flush
Lateral and lower installation of the Azor float valve
258/36
0
107
56
107
56
250
152
Characteristics Azor plus inlet valve for vitreous china cistern
Silenced valve class 1 NF certified Delayed refilling: it starts after the outlet valve is in closed position
3/8 fitting Counterpressure mechanism Pressure: 0.2 - 16 bar Static pressure: 20 bar Certified mechanism according to WRAS, NF Standards
5 years warranty
Azor PLUS
Cod. Inlet position
564100 Side Brass 3/8 19.17
564102 Bottom Brass 3/8 19.17
56
97
251
153
Characteristics Azor silent inlet valve for vitreous china cistern
Noise level less
154
Cod. Inlet position
560160 Side Brass 3/8 7.63
560170 Side Brass 1/2 7.63
Characteristics JOLLY UNI inlet valve for vitreous china cisterns
Silenced valve class 1 NF certified Piston closure Static pressure: 10 bar Pressure: 0.5 - 10 bar Certified mechanism according to NF Standards
5 years warranty
Cod. Inlet position
562180 Bottom Brass 3/8 14.62
561470 Side Brass 3/8 15.02
562195 Bottom connection conversion kit 6.69
Characteristics AZOR inlet valve for vitreous china cisterns Silenced valve class 1 NF certified Static pressure: 20 b