SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Plasma TVJun 2004 Digital Media Division
WLP8A Plasma TV
SERVICE MANUAL
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radi-ation and materials, various measures are provided in this Plasma TV. Be sure to read cautionary items described in the manual to maintain safety before servicing.
1. Features -----------------------------------------------32. Speci fications -----------------------------------------43. Component Names ---------------------------------54. Service point ------------------------------------------65. Adjustment --------------------------------------------76. Troubleshooting ------------------------------------ 187. Block diagram ------------------------------------- 22
8. Connection diagram ---------------------------- 259. Wiring diagram ----------------------------------- 2610. Basic circuit diagram ----------------------------- 2711. Printed wiring board diagram ------------------ 3312. Disassembly diagram --------------------------- 4613. Replacement parts list --------------------------- 53
Contents
1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be taken care suf ficiently in order not to be injured.
2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become suf fi-ciently cool.
3. Special care shall be taken to the display area in order not to damage its surface.4. The Panel Module shall not be touched with bare hand to protect its surface from stains.5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the
display area of the Panel Module but also a serviceman himself.6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and flexible
cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care suf fi -ciently not to break. If you break Chip Tube, the Panel doesn' t display anything forever.
Service Warning
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Caution
2
CAUTION FOR SAFETY
Please read this page before repair the monitor.
This page explains to following items for keep the safety of set and prevent to accident
during repair work.
We explain by symbol at happen the damage or injury when took wrong repair.
Warning This symbol means "possible to die or heavy damage"
Caution This symbol means "possible to damage or something will break"
We made the symbol as below, which are kind of following items.
This symbol means "CAUTION"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "MUST"
This symbol means "DO NOT"
Should be follows to instructions.
We indicates to cabinet, chassis and
parts by label, which are special atten-
tion part.
Please fol low to note and [Safety
Instructions] of User’s Manual.
Prevent the electric shock.
Please take care dur ing work ing
because monitor has high voltage part
and power supply part.
Possible to die if you tough to these
place by miss take.
Please disconnect power plug during
overhaul, reassemble or change parts.
You will die or take damage by electric
shock if you touch to live part.
Use recommended components.
Please use to same characteristic com-
ponent, which is same as previous for
your safety and keep reliability espe-
cially marked by in parts list and cir-
cuit diagram.
It is reason of electric shock or fire if
you use non-recommended compo-
nent.
Should be kept same style of wiring or component.
Monitor uses tubes or tapes, which
made by insulator, and some compo-
nents are keep distance from surface of
PWB for safety.
Internal leads kept from hot part or high
voltage part by clamper or styling, so
please return to original condition for
prevent to electric shock or fire.
Should be done safety check after finished.
Every part (removed screws, compo-
nent and wiring) should be returned to
previous condition.
Check around repair position for make
damage by miss take and measure the
insulated impedance by meg-ohm
meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It is reason for electric shock or fire if
that value is less than 4M ohm.
Nobody can check and repair to the code
and combination circuit of HDCP.
Never remove the shield case, which is
assembled to the code and combination
circuit of HDCP.
WARNING
3
PRECAUTIONS How to clean the plasma screen panel of the monitorBefore cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
How to clean the cabinet of the monitorUse a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neu-tral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
1. Features Enhanced definition Plasma display panelThe 42-inch color plasma display panel, with a resolution of 852 (H) x 480(V) pixels, creates a widescreenpicture. This panel features a thin form factor and can be hung on a wall with an optional wall mounting kit.
High Performance Digital ProcessorThis panel displays a wide range of personal computer signals from 640 x 400, 640 x 480 VGA to 1600 x 1200UXGA.(RGB Analog input)
Easy-to-use remote control and on screen display systemThe included remote control operates all TV functions. Futher, the on-screen display system, shows the status of the control settings in an easy-to-view fashion.
� Power saving systemThe International ENERGY STAR power saver feature saves power consumption automatically when input signals are not available. When connected to a VESA DPMS-compliant PC, the monitor cuts its power
consumption while it is idle.
4
2. Specifications
Applicable video signals for each input terminal
Terminal RCA DVI D-sub * Remarks
Type Composite S-video Component PC/STB RGB
AV1 O O Refer to P21
AV2 O O Refer to P21
AV3 O 480i Video Signal only
AV4 O 1080i/720P/480P/480i inputs. Refer to p21
RGB1 O Refer to p21
RGB2 O Refer to p21
(O: Available)
• It takes at least 30 minutes to attain the maximum picture quality.
Panel Display
dimensions
Approx. 42 inches (920 (H) x 518 (V) mm, diagonal 1059mm)
Resolution 852 (H) x 480 (V) pixels
Net dimensions 1030 (W) x 636 (H) x 91 (D) mm (excluding Speakers / Stand)
1232 (W) x 711.5 (H) x 300 (D) mm (including Speakers / Stand)
Net weight 33.0 kg (excluding Speakers / Stand)
42.0 kg (including Speakers / Stand)
Ambient
conditions
Temperature Operating: 5°C to 35°C, Storage: -15°C to 60°C
Relative humidity Operating: 20% to 80%, Storage: 20% to 90% (non-condensing)
Power supply AC100 - 240V, 50/60Hz
Power consumption/at standby 310W / <3W
Audio output 10W + 10W (6 )
(RGB input)
Input signals Input terminals RGB1-VGA audio input terminal (3.5mm Stereo Mini Jack)
RGB1-VGA analog RGB input terminal (D-sub 15-pin)
RGB2 DVI-D input terminal (DVI-D)
RGB2 DVI-D audio input terminal (3.5mm Stereo Mini Jack)
Video signals 0.7 V
Sync signals H/V separate, TTL level [2k ]
H/V composite, TTL level [2k ]
Sync on green, 0.3 Vp-p [75 ]
Recommended signal 43 modes
(Video input)
Input signals Input terminals AV1 : Composite video input terminal(RCA)
AV1 : S video input teminal
AV1 : L/R audio input terminal(RCA)
AV2 : Composite video input terminal(RCA)
AV2 : S video input teminal
AV2 : L/R audio input terminal(RCA)
AV3 : Component input (Y-CbCr) (RCA)
AV3 : L/R audio input terminal(RCA)
AV4 : Component input (Y-CbCr or Y-PbPr) (RCA)
AV4 : L/R audio input terminal(RCA)
Video signals AV1 : NTSC-M
AV2 : NTSC-M
AV3 : 480i
AV4 : 480i , 480p , 1080i/60 , 720p/60
Video output Signal OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
Recommended signal 5 modes
(RF input)
Input signals Input terminals ANT: 75 Unbalanced
RF Video System NTSC-M
5
3. Component names
[Main unit]
Control panel
• Adjustment buttons are located on the bottom.
• The back cover is provided with indications to distinguish the adjustment buttons.
SUB-POWER button
• () indicates the function while the MENU is displayed on the screen.
VOLUME UP/DOWN buttons ( ADJUST buttons)
ENTER button PROGRAM UP/DOWNbuttons( SELECT button)
MENU button
SOURCE button
Remote-controlreceiver
Power lamp
Main power switch
The main power switch is located at the back, on the lower surface.
[Remote control]
SLEEPPress this button to activate the Sleep Timer menu.
CH-LOCKPress this button to select the V-chip function.
MENUPress this button to select the On Screen Display Menu.
AV1Press this button to select the VIDEO 1 or S-VIDEO 1 INPUT.
AV2Press this button to select the VIDEO 2 or S-VIDEO 2 INPUT.
ZOOMPress this button to change the picturesize.
SWAPPress this button to exchange main picture with PIP picture.
MUTEPress this button to turn off the sound.Press it once more or press the volume up button to return the sound.
MTSPress this button to select Multi-channel television sound. This button operates only in the TV mode.
NUMBERS KEYPADPress these buttons to access the corresponding TV channels.
SourcePress this button to select the INPUTSource.
TVPress this button to choose TV as the source.
POWERPress this button to turn the TV on or off.
CCDPress this button to show the Close Caption menu.
RGB1Press this button to select the RGB1 VGA INPUT.
AV3Press this button to select the AV3 480i INPUT.
AV4Press this button to select the AV4480p/480i INPUT.
RGB2Press this button to select the RGB2DVI-D INPUT.
ASPECTPress this button to selcet how the picture is displayed on the screen; 4:3,16:9, Panoramic, or Cinema modes.
LAST CHPress this button to return to the last Channel viewed.
DISPLAYPress this button to show the input signal information.
PIPPress this button to show the PIP and change the size of PIP.
STILLPress this button to freeze the picture. Press it again to return to normal operation.
VOLPress these two buttons to adjust the volume up or down.
CHPress these two buttons to selectthe channel up or down.
6
4. Service points Lead free solder
This product uses lead free solder (unleaded) to help preserve the environment. Please read these
instructions before attempting any soldering work.
Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead
free solder can splatter at high temperatures (600˚C).
Lead free solder indicatorPrinted circuit boards using lead free solder are engraved with an "F."
Properties of lead free solderThe melting point of lead free solder is 40-50˚C higher than leaded solder.
Servicing solderSolder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not
taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the
lead free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering ironA soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450˚C)
Recommended temperature range per part:
Part Soldering iron temperature
Mounting (chips) on mounted PCB 320˚C±30˚C
Mounting (chips) on empty PCB 380˚C±30˚C
Chassis, metallic shield, etc. 420˚C±30˚C
(1) FILTER PWB, IR PWB, SW PWB, KEY PWB, SP TERMINAL(L/R) PWB
(2) INTERFACE, PWB
(3) VIDEO PWB
(4) FORMATTER PWB
(5) POWER BOARD
The PWB assembly which has used lead free solder
7
5. Adjustment� How to get to Factory Adjustment modeUsing the front control buttons with the set turned on and input source set RGB1 can activate it.Press the SUB-POWER( ) button, and CH button at the same time, and hold for more than 5 seconds.
The set turns on in adjustment mode with OSD.
� Changing data and Selecting Adjustment codeWhen the set is in adjustment mode, the cursor , , ,
, , ,
and ENTER buttons of the remote control or front panel may be used as the adjustment keys.
, buttons are used for selecting adjustment icon. , buttons are used for changing data values.
ENTER button is used for confirming the data.After finishing the necessary adjustment press repeat these steps.
� Setp 1 Need clear MCU EEPROM 1.When setting factory mode, need clear the MCU EEPROM, sp please use select " NV Clear"
and push the "ENTER" button do this function.
Factory Mode Control OSD
Factory Mode LP8AG-V1.0 T1
MAX BRIGHT
BLACK LEVEL
� Setp 1 Need clear MCU EEPROM
2.When NV Clear yellow color change to purplish red, then please push "POWER SWITCH OFF and ON".
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
Factory Mode LP8AG-V1.0 T1
MAX BRIGHT
BLACK LEVEL
WARM
NORMAL
COOL AUTO COLOR
8
The Expression of input signal mode (format)
PAL1: S and Composite of PAL/SECAMPAL2: Component of PAL (YCBCR)PAL3: Component of PAL (YPBPR)PAL4: Component of PAL (YCBCR-SCART)PAL: PAL1-4NT1: S and Composite of NTSCNT2: Component of NTSC (YCBCR)NT3: Component of NTSC (YPBPR)NT4: Component of NTSC (YCBCR-SCART)NTSC: NTSC1-4HD1-6: Component (shown in the table )HD7: Component of 1080i/50 (YPBPR)HD8: Component of 1080i/50 (YCBCR)HD9: Component of 576p (YPBPR)HD10: Component of 576p (YCBCR)HD: HD1-10 of ComponentTV: NTSC / HDPC: PC signal
VideoInput System Judgment of
H.FrequencyVideo Input
Setup Mode
AV1AV2
AV3
AV3
PAL 15.625kHz(576i)
Auto PAL1DVD PAL1
NTSC15.75kHz
(480i)Auto NT1DVD NT1
SECAM15.625kHz
(576i)Auto PAL1DVD PAL1
NTSC 15.75kHz(480i)
Auto HD10SDTV/DVD HD10
HDTV HD8PAL 15.625kHz
(576i)Auto HD3
SDTV/DVD HD3HDTV HD8
SECAM 15.625kHz(576i)
Auto HD5SDTV/DVD HD6
HDTV HD8NTSC
PAL
15.625kHz15.725kHz31.5kHz33.75kHz45kHz64kH
Auto HDSDTV/DVD HD
HDTV HD
9
Item
Adjustment Preparations
Turn on the set and perform
pre-heat run more than 1
min with burn-in screen.
Receive full back pattern
signal
(or Video silence signal;
it will be automatically
turned off after a few
seconds by power save
function.)
Connect voltmeter leads
to Vs (or Va) and GND
test points of the power unit.
(1)
(2)
(3)
(1)
(2)
(3)
Adjustment Procedures
Adj. point Refer the figure below
Remarks
Power Unit Vs, Va Adjustment
Turn Vs ADJ to adjust Vs voltage
to be within ±0.1V of the value
specified in the label on the panel.
Turn Va ADJ to adjust Va voltage
to be within ±0.2V of the value
specified in the label on the panel.
Reconfirm that Vs voltage remains
within ±0.1V of the specified value.
Readjust if it’ s outside of the margin.
Label example
<LOT>N6
Vs= 185.0V
Va=65.0V
Permissive level of voltage in
sufficient time of heat-run
performed is:
Vs: within±0.45V
Va: within±0.55V
Label position (Reference)
Upper right
If it’ s hard to read the
voltage value because of the
wiring,
highlight it in advance to be
visible.
Vs
GND
Power unit for WVGA
Vs ADJ
Va
Va ADJ
Item Auto Color Adjustment Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100%
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “AUTO COLOR” mode.
2. Push and adjustment
3. White 251 need high light
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
16 20 24 28 32
243 235 247 249 251
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
10
Item Max Bright Level Check Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100%
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “MAX BRIGHT" mode.
2. Push and adjustment
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
11
Item Black Level Adjustment Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100% (2004 Extron electronic infocomm
DEMO pattern)
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “WARM" mode.
2. Push and adjustment
3. Dark 12 need weak light
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
16 20 24 28 32
243 235 247 249 251
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
161284 20 24 28 32
243 235 247 249 251241239
adjustment "B" level
BLACK LEVEL
B 96
12
Item Color Temperature Adjustment (Warm) Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100% Use White pattern
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “WARM" mode.
2. Push and adjustment
3. If adjutment "G" and "B" please
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
adjustment "R" level
WARM
B
228
repeat 1~2 steps.
Color mode while the Warm
mode while the following is
selected
G
R
210
186
<Specification>Video color tempertaure (WARM)
x=0.314 0.005
y=0.327 0.005
(Color Temp:6500 K 0MPCD)
+-
+-
+-o
13
Item Color Temperature Adjustment (Normal) Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100%
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “Normal" mode.
2. Push and adjustment
3. If adjutment "G" and "B" please
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
adjustment "R" level
Normal
B
228
repeat 1~2 steps.
Color mode while the
Normal mode while the
following is selected
G
R
210
186
<Specification>Video color tempertaure (Normal)
x=0.285 0.005
y=0.293 0.005
(Color Temp:9300 K 0MPCD)
+-
+-
+-o
14
Use White pattern
Item Color Temperature Adjustment (Cool) Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100%
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “Cool" mode.
2. Push and adjustment
3. If adjutment "G" and "B" please
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
adjustment "R" level
Normal
B
228
repeat 1~2 steps.
Color mode while the
Cool mode while the
following is selected
G
R
210
186
<Specification>Video color tempertaure (Cool)
x=0.268 0.005
y=0.283 0.005
(Color Temp:12000 K 0MPCD)
+-
+-
+-o
Use White pattern
15
Item AV4 Auto Color Adjustment Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : COMPONENT
Signal : 1080i 0.7V
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “AUTO COLOR" mode.
2. Push and adjustment
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
adjustment "R" level
16
Item Panel check Adjustment Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : TV mode
Signal : without (any channel)
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ▲▼/ ENTER button
select “CHECK PANEL" mode
2. Push "ENTER" key then panel
Envirment:
20lux or less
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR CHECK PANEL
MAX BRIGHT
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR CHECK PANEL
MAX BRIGHT
FACTORY MODE LP8AG-V1.0 T1
WARM
NORMAL
COOL
NV CLEAR CHECK PANEL
MAX BRIGHT
screen will display the white pattern.
17
6. Troubleshooting How to get to Burn-in mode
This mode displays the test patterns of some single color raster in turn. These signals are from built-in gener-ator of PDP panel. So it can be presumed that maybe the panel has some trouble when the screen of Burn-in mode is abnormal.Using the front control buttons with the set turned off (standby) can activate this mode.Press the SUB-POWER( ) button,and button button at the same time, and hold for more than 5 seconds.
18
Yes
Yes
Yes
Yes
Speaker
Picture is displayed. But no sound
Are the voltages
applied to EAJ1 pins
of the Audio PWB?
No
Audio PWB
+ 5V
+12V
GND
No Are there signals
on Speaker Terminals?
Audio PWB
Are the signals
applied to EAF1 pins
of the Audio PWB?
No
Formatter PWB or
Video PWB
No
Yes
Power cannot be turned on (LED does not light)
Is the input voltage
applied to Power supply unit?
(CN61 , )
AC inlet Power switch AC Fuse
F950 T6.3AH 250V
Are the voltages
applied to CN63 pins
and CNPPS pins
of Power supply unit ? [CN63] +5V [CNPPS] +30V
+3.3V + 5V
+12V
+10V
Formatter PWB
Power supply unit
No
Yes
FILTER PWB
L ch
R ch
GND
Check
Speaker terminal and
Speaker cord.
Unlocked
CheckLocked
No sound
Are the voltage
applied to EAJ1 pins?
(When EAJ1 is
disconnected.)
Power supply
unit
No
Flow Chart
19
Yes
No
65V
185V
GND No
+3V
GND Yes
No
red
green/orange
No
Yes
+5V YesNo
Yes
Are the voltages
of CN64 pin
on the Power supply unit
correct?
Is the voltage
of CN68 pin
on the Power supply unit
correct ?
Panel Module
Panel Module
Power supply unit
Is the LED red or
green/orange?
Picture is not displayed (LED is lighting)
Is Voltage
applied to CN63 pin
of the Power supply unit?
Power supply
unit
Is the voltage
of CN68 pin
on the Power supply unit
5V?
Power supply unit
Is it the power
saving mode?
Formatter PWB
Input signal Cableor Formatter PWB
20
219
NO POWER
FUSE
STB
See
NO PICTURE & SOUNDQ101,R005
check voltageD010(K)-J28
D151,IC101,
Q104,Q108,
etc
impedance
check D001
impedance checkQ003/Q004
impedance
check Q201
impedance
check Q301
D001
Q003,Q004,
etc
Q201,IC201
D210,Q200,etc
Q301,Q300
D310,etc
NO Vs,Va,Vcc,STB
[ POWER BOARD ]
over 130V
OK
OK
OK
OK
OK
NG
NG
NG
NG
NG
NO PICTURE& SOUND
STB
Vcc
See NO
PICTURE
IC201,Q200,PC201,PC202,etc
See NO POWER
IC001,D005,D006,D007,
D008,PC003,etc
NG
NG
OK
OK
NO Vs,Va,Vcc
open connector
CN806,CN807
impedancecheck Vs LINE
impedancecheck Vs LINE
PDP module
Vs NG
impedance
check Va LINE
open connector
CN807
impedancecheck Va LINE
PDP module
Va NGD351 D551
Va:no upriseVs:down after up
Vs:no upriseVa:down after up
SW ON
Q300,I301,D310PC301,PC302,
etc
Q501,Q500,D510,Q502,PC501,
PC502,etc
NG
NG
NG
OK
OK
OK
NO PICTURE NO Vs,Va
check voltage
J61-J28
over 300V
under 300V
NG
OK
NG
under 130V
22
7. Block diagram5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
AC in
IC202
Va
Vs
6V
30V
12V
10V
Vcc5.1V
Power go
Power off
CHOP
REG
CHOP
Vs(80)
Vs(60)
LV
T201
IC201/Q201
T301
IC301/Q301
T501
Q501
STB
T101
IC101/Q101
RL002
RL001
Bridge
D001
PFC
IC001
Q003/4
L005
AC00V
320V
AC200V
370V
C016
C201
C101
AC-detect
MPF7414 Block Diagram
D010/D011
D020/D021
<Doc
>
<Titl
e>
A4
11
Wed
nesd
ay, J
une
02, 2
004
Title
Size
Doc
umen
t Num
ber
Rev
Dat
e:Sh
eet
of
Blo
ck d
iagr
amB
lock
dia
gram
-- PD
P (
US
ver
sion
)P
DP
( U
S v
ersi
on )
Vide
o A
Dec
oder
VPC
3230
SD
I 42”
(LC
D)
Pan
el
Driv
er
Vide
o 1
Inpu
t
IRA
udio
-AM
PTD
A89
46
D-S
UB
/DV
IA
udio
I/O
RG
B-D
-SU
BIN
TPU
T
Vide
o B
Dec
oder
VPC
3230
Keyp
ad
De-
inte
rlace
rFL
I230
0
OV
ER
Driv
e
(OP
T)
LVD
S
FRA
ME
DD
RH
Y501
28
FLA
SH
RO
M29
LV04
0B
Y/C
b/C
r
TUN
ER 1
VO
L D
EC
OR
DM
SP
34X
X
TUN
ER 2
50 p
inco
n
FRA
ME
HD
TVY/
Pb/P
r
RS-
232
DVI
INTP
UT
Vide
o 2
Inpu
t
S-V
IDEO
2
MU
XA
D81
86
SM
5301
LPF
S-V
IDEO
1
V-C
HIP
Z861
29C
XA20
69A
V/S
W
M-3
D-C
OM
BF
TUN
ER
-BO
XO
UTP
UT
VID
EO/A
UD
IO
DIP
PG
EN
ES
ISG
M16
01
De-
inte
rlace
LVD
S
trans
mitt
er
AD
C
DV
I
OS
DM
CU
23
Blo
ck d
iagr
am-T
uner
( re
vise
d fo
r US
ver
sion
)
TUN
ER
2E
NG
4
G
TUN
ER
1E
NG
1G
RE
GU
LATO
R12
V T
O 9
V/5
V
CN
602
50 P
INC
ON
NE
CTO
R
CN
601(
RC
A)R
CA
VID
EO
1/S
-VID
EO
AU
DIO
1
CN
600(
RC
A)C
OM
PO
NE
NT
1 Y
/Pb/
Pr
AU
DIO
1
NTS
CAN
TEN
NA
F-TY
PE
MA
STE
RS
LAV
E
CN
605(
RC
A)A
V-O
UT&
SU
B-W
OO
FER
I201
CXA
2069
QC
OM
PO
SIT
E S
W
IC
UPD
6408
4
CN
600(
RC
A)C
OM
PO
NE
NT
2Y
/Pb/
Pr
AU
DIO
2
CN
602(
RC
A)R
CA
VID
EO
2/S
-VID
EO
AU
DIO
2
24
25
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
AC INPUT LINE-FILTER
AC INPUT
POWER SW
POWER FILTER
POWER UNIT
CN806 10P AMP
1 2 3 4 5 6 7 8 9 10
VsVsVsNCGND
GND
GND
GND
NCNC
1CN68 B6B-PH
2 3 4 5 6
STB3.3V
NCGND
GND
NcVcc
1Vs
2Vs
3 4 5 6 7 8
NCGND
GND
VaGND
Vcc
1 2 3
GND
GND
Vcc
4Vcc
CN807 B8P -VH
CN63 B5B-EH
1 2 3 4 5
GND
POWER GO
GND
POWER OFF
STB 5V
CN61 B3P-VH
1 2 3
AC(L)
NCAC(N)
GND
GND
5V5V
6 7 8 9
CN62 B8P-VH
1AC(N)in
2NC
3AC(L)in
4NC
5
AC(N) out
6NC
7NC
AC(L) out
8
CNNPS B13B-EH
1 2 3 4 5 6 7 8 9 10111213
30V
GND
GND
5V5VGND
GND
12V
12V
GND
GND
10V
10V
CN805 4P(JAMP)
AC INPUT
AC-IN(L)
2
CN940 4P
BLK
RED
WHITE
BROWN
1 2 3 4
1 2 3 4
BLK
WHITE
BROWN
RED
CN951 4P
CN950 2P
1 3AC-IN(N)
GND
321
AC-IN(N)
GND
AC-IN(L) AC(L)
2 3CN952 B3P-VH
1
AC(N)
NC
CN987 B3BTUNERI2C SCLTUNERI2C SCL
GND 123
CN985 B3B123456789101112131415
CVBS-SUB
SYOUT-SUB
SCOUT-SUB
3D-Y
3D-C
SYOUT-MAIN
SCOUT-MAIN
GND
GNDGND
GND
GND
GND
GND
GND8
GNDSYOUT-SUB
10
GND
1
13
SCOUT-SUB
11
GND3
73D-Y
GND
SYOUT-MAINGND
4
12
GND
5
SCOUT-MAIN
6
2
CN200 B15B
GND3D-C 9
14
CVBS-SUB
15GND
3TUNERI2C SCL
GND
CN204 B3B
2TUNERI2C SCL1
8
GNDYOUT
10
GND
1
PROUT
11
GND3
7CR
CBGND
4
12
GND
56
2
CN986 B3B
GNDY 9
PBOUT
8
GNDTUNER-SIF1
10
GND
1
13
TUNER-AF
11
GND3
7YCBCR-R
TPBPR-LGND
4
12
GND
5
YPBPR-R
6
2
CN988 B14B
GNDYCBCR-L 9
14
TUNER-SIF2
GND
GND
AV-LOUT
AV-R
AV-ROUT
3
GND
4
109
CN989 B11B
11BOX-DETEC
7
SUB-WOOFER
21
56
8
AV-L
GND
GND
GND
GND
GND
Y
YOUT
CR
3
GND
4
12
109
CN201 B12B
11CB
7
PROUT
21
56
8
GNDPBOUT
GND
GND
8
11
TUNER-SIF1
5
YPBPR-RGND
12
YCBCR-L
GND
10
6
1314
2
7
GNDTPBPR-L
43
9
TUNER-AF
CN202 B14B
GND
YCBCR-R
TUNER-SIF2 1
GND
GND
GND
AV-RGND
9
1
10AV-LOUT
3
GND
11
2
AV-ROUT
GND
GND
SUB-WOOFERGND
54
8
BOX-DETEC
7
CN203 B11B
6
AV-L
GNDPOWER-OFF
1
32
STB 5V
POWER GOGND
GND
54
7
CN984 B11B
6
GND
POWER GOGND
9
1
5V
3
5V
2
GND
GNDPOWER OFF
GND54
87
CN983 B9B
6
STB 5V
8
11
5
12V 12
GND
10
6
13
2
7
12V
43
9
CN982 B13B
6V
1
5VGND
GND
6V
GND
GND
GND
5V
GND
GND 3
7
2GND
POWER GO
CN984 B11B
POWER-OFF
STB 5V
1
GND 54
6GND
12
9
76
3
CN981 B13B
5
10V
5V
8
GND
GND
11
GND
1
12V
GND
30V
4
10VGNDGND12V
5V
13
10
CN987 B3B1YOUT
PBOUT 2345
PROUTGND
SCOUT-SUBSYOUT-SUBGND
678TUNER-SDA
TUNER_SCL 910GND11SIF21213BOX-DETEC14
NC
NCGNDGND
15161718
CVBS-SUBNC
GND 19SUB 20
21AV-LOUTAV-ROUT
GND22232425
AV-LAV-R
26272829
NCPAL_CVBS
GNDNCGND
SCOUT-MAINSYOUT-MAIN
CN930 2P
SP OUT+
SP OUT-
VPD-422SPL
1 2
VPD-422SPR
CN930 3P
SP OUT+
SP OUT+
SP OUT-
1 2 3
SP OUT+
CN802 2P
SP OUT-
1 2SP OUT+
1 2SP OUT-
3SP OUT+
CN801 3P
12VGNDCBYCR
GND5V
30VGND
303132333435363738394041424344454647484950YCBCR-R
YCBCR-LGND
YPBPR-RYPBPR-L
GNDNC
SIF1TUNER-AF
39
14
28
SUB
GND
YPBPR-L
NC
CN987 B3B
Y
29
20
6
CB
YPBPR-R
38
NC
NC
21
7
3736
GND47
GND
PAL_CVBS
AV-LOUT
8
1
12V
YCBCR-L
GND
AV-ROUT
TUNER-SDA
YOUT
GND
35
YCBCR-R
NC
GND
TUNER_SCL
PBOUT
GND
TUNER-AF
50
22
9
2
15
23
3
GND
16
NC
3334
24
4
SCOUT-MAIN
17
10
46
CR
25
5
3231
SYOUT-MAIN
18
GND
30
SIF1
GND
PROUT
CVBS-SUB
11
48
4443
NC
SIF2
AV-L
GND
12
AV-R
GND
41GND40
45
30V
19
13
26
SCOUT-SUB
5VGND
49
42
BOX-DETEC
27
SYOUT-SUB
RF F 1
AV1AV1AV1AV1
VIDEOS-VIDEOAUDIO-LAUDIO-R
AV2AV2AV2AV2
VIDEO
AUDIO-RAUDIO-LS-VIDEO
AV3AV3AV3AV3AV3
YCBCR
AUDIO-LAUDIO-R
AV4AV4AV4AV4
AV4
AUDIO-RAUDIO-L
YPBPR
TUNER PCB
INTERFACE PCB
2
GND
10
GND
1CN806 10P AMP
2 3 4 5
GND
6
GND
Vs
NC
7
NC
Vs
8
VsNC
9
1 2 3
GND
GND
Vcc
4Vcc
CN805 4P(JAMP)
FI-TWEP31-VFGNDRA-RA+RB-RB+GNDRC-RC+
RCLK-RCLK+RD-RD+GNDGNDNC
NC/12VNC/12V
NCGND
NC/CTLNCNCNCNCNC
GNDDISPENSDATASCLK
12345678910111213141516171819202122232425262728293031
SLEGND
24
2
NC/12V
RC+
FI-TWEP31-VF
RB+
SLE
RD-
26
3
17
15
31
22
18
NC/CTL
14
NC
4
RD+
6
SCLK
NC
SDATA
GND
23
29
7
NC/12V
RA-RA+
12
NC
27
8
GND
NC
25
10
1
NC
GND
RB-
19
16
13
DISPEN
GND
NC
RCLK-
30
5
20
9
NC
RC-
GND
21
RCLK+11
28
GND
GND
CN603 5P
PWR-G
PWR-Y
+5V
GND
IR-DAT
IR-DAT
1 2 3 4 5
1PWR-Y
3
IR-DAT
PWR-G
GND
+5V
CN603 5P
2 54IR PCB
CN602 4PNCVIN2
NCVIN1
ADC2-RETURN
1
ADC-VREF
ADC1-RETURN
3V3
NCGND
2 3 4 5 6 7 8 9 10
6ADC2-RETURN
VIN2
ADC1-RETURN
3V3
2 8
CN602 4P
VIN1
GND
7
NC
93 54
NC
ADC-VREF
10
NC
1
KEY PCB
FORMATTER PCB
5Va
4GND
Vcc
1 86
VsVs
GND
CN807 B8P -VH
2NC
3
GND
7
PDP PANEL
<Doc
>
<Titl
e>
A3
11
Wed
nesd
ay, J
une
02, 2
004
Title
Size
Doc
umen
t Num
ber
Rev
Dat
e:S
heet
of
8. Connection diagram
26
9. Wiring diagram
27
10. Basic diagram
28
10.1 Power circuit diagram
29
30
31
32
33
11. Printed wiring board diagram11.1 Main board (Top Side)
34
11.2 Main board (Bottom Side)
11.3 Tuner board (Bottom Side)
35
11.4 Tuner board (Top Side)
36
11.5 Speaker board (R)(Bottom Side)
37
11.6 Speaker board (R)(Top Side)
38
11.7 Speaker board (L)(Bottom Side)
39
11.8 Speaker board (L)(Top Side)
404
11.9 Power board (Bottom Side)
415
11.10 Power board (Top Side)
426
11.11 Power board (Top Side)
43
11.12 Power board (Bottom Side)
448
45
46
12 Disassembly diagram12.1 Packing
46
12 Disassembly diagram12.1 Packing
4P
CS
12.2 Disassembly Unit
47
48
49
50
51
52
13 Part list
13.1.11.4 Material List by Location
Date: 07/30/04
Time: 14:59:56
R/N:ydr6069j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. WLP8AG REV. 0B
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
10
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# WLP8AG10001 WLP8AG C-E FOR USA UR+FCC+UL/CUL 42"LGPDP 582X480
1 GA05000060I PWR CORD SP305X1.8MXIS14SVT GRY HEWTECH 1 - - - - 301
2 DC1900405D0 CB ASY DV87 RCA 1.8M BLK G/BLU/R3P PB 1 - - - - 303
3 DC1900406D0 CB ASY DV87 RCA 1.8M BLK R/W 2P PB 1 - - - - 304
4 DC1900404D0 CB ASY DV87 RCA 1.8M BLK-YEL PB 1 - - - - 305
5 DC1900403D0 CB ASY DV87 S-CABL 1.8M BLK 4PIN PB 1 - - - - 306
6 NBC02100200 FLAT CABLE 2P P1.25 430mm W/CLAMP CORE 2 - - - - 307 307
7 DC1900401D0 CB ASY DV87 20276 1.8M BLK DSUB PB 1 - - - - 308
8 DC1900402D0 CB ASY DV87 AUDIO 1.8M BLK GRN-GRN PB 1 - - - - 309
9 GC0LR61MX10 BATT LR6(SN) 1.5V X WHM MAXELL 2 - - - - 310 310
10 CG10121V0H0 SPK SET 12W 60HM 42" R 1 - - - - 311
11 CG10121V1H0 SPK SET 12W 60HM 42" L 1 - - - - 312
12 DC1900400D0 CB ASY DV87 20276 1.8M BLK DVI-DVI PB 1 - - - - 313
13 DC1900400H0 CB ASY LP8A RCA 1.8M BLK R/W/Y 3P PB 1 - - - - 314
14 PK11V002400 REMO CTRL BONTECH 90146100-6001 CE LP8A 1 - - - - 315
15 5D420330001 DIS UNIT C-E WLP8AG 42"LG_PDP 852X480 1 - - - - 351
16 6D000330001 PACKING C-E WLP8AG FOR USA 1 - - - - 352
17 X66ARE30001 MEC PACKING C-E WLP8AG 1 - - - - 353
End of Report
53
13.1.11.4 Material List by Location
Date: 07/30/04
Time: 14:37:00
R/N:ydr6069j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 6D0003 REV. 0B
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 6D000330001 PACKING C-E WLP8AG FOR USA
1 EJ4LP8A0000 RATING NP N-LP8A-CE UCFGO 1 - - - - 001
2 FCHV8280010 HANDGRIP FOR CARTON R1 4 - - - - 003 003 003 003
3 HB4LP8A0000 CARTON C-LP8A-CE 1 - - - - 004
4 HGLP8A00400 SPEAKER TERMINAL LABEL L-LP8A-CE 2 - - - - 006 006
5 HGHP8C00110 AC IN LABEL HP8C-L002 ADD CAUTION R1 1 - - - - 007
* 6 HDCELP8A100 SPEAKER MANUAL U-LP8AG-CE US 1 - - - - 008
7 HGHP8C00300 TEMP. CAUTION LABEL HP8C-L004 1 - - - - 009
8 HGLP8A00200 SINGAL TERMINAL LABEL L-LP8A-CE 1 - - - - 010
9 HGLP8A00300 CONTROL BUTTON LABEL L-LP8A-CE 1 - - - - 011
10 HGLP8A00000 MODEL LABEL L-LP8A-CE FOR CARTON 2 - - - - 014 014
11 HGLP8A00500 TERMINAL LABEL L-LP8A-CE 1 - - - - 015
12 HK3HP8C0000 EPE BAG HP8C-K001 42"PDP L1185XW860 1 - - - - 016
* 13 HACELP8A100 GIFT BOX C-LP8A-CE FOR ACCESSORY 1 - - - - 018
14 HK3LP8A0000 EPE SHEET LP8A-CE L1050XW650MM FOR BASE 1 - - - - 019
* 15 HE8LP8S0000 PAPER PAD WLP8SA-J88 L1165*W532mm 1 - - - - 021
* 16 HF6LP8A0100 IMAGE RETENTION NOTE F-LP8A-CE US 1 - - - - 022
* 17 HF6LP8A0000 QUICK SETUP GUIDE F-LP8AG-CE US 1 - - - - 023
* 18 EJ4SPC42100 RATING NP (SPEAKER) N-SDC-421-J88-S FOR WLP8A/SA 2 - - - - 024 024
End of Report
54
13.1.11.4 Material List by Location
Date: 04/28/04
Time: 18:30:46
R/N:ydr6069j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. X66ARE REV. 0A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# X66ARE30001 MEC PACKING C-E WLP8AG
1 FJLP8A19100 EPP FOAM(B/L) LP8A19 1 - - - - 201
2 FJLP8A1D100 EPP FOAM(B/R) LP8A1D 1 - - - - 202
3 FJLP8A1E100 EPP FOAM(T/L) LP8A1E 1 - - - - 203
4 FJLP8A1F100 EPP FOAM(T/R) LP8A1F 1 - - - - 204
End of Report
55
13.1.11.4 Material List by Location
Date: 06/29/04
Time: 19:25:37
R/N:ydr6069j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 5D4203 REV. 0B
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 5D420330001 DIS UNIT C-E WLP8AG 42"LG_PDP 852X480
1 ACPVG420100 PDP MODU PDP42V60000 42" LG 1 - - - - 301
2 CL900007900 LINE FILT HP8C SUP-C14608F 8A/250V PbF 1 - - - - 302
3 DC020171300 H-CON SET LP8A INTERFACE CN982-CN800 1 - - - - 303
4 DC020171400 H-CON SET LP8A INTERFACE CN983-CN63 1 - - - - 304
5 DC020171500 H-CON SET LP8A INTERFACE CN989-CN203 1 - - - - 305
6 DC020171600 H-CON SET LP8A INTERFACE CN984-CN803 1 - - - - 306
7 DC020171700 H-CON SET LP8A INTERFACE CN988-CN202 1 - - - - 307
8 DC020171800 H-CON SET LP8A INTERFACE CN981-CNPPS 1 - - - - 308
9 DC020171900 H-CON SET LP8A INTERFACE CN987-CN204 1 - - - - 309
10 DC020172000 H-CON SET LP8A INTERFACE CN985-CN200 1 - - - - 310
11 DC020172100 H-CON SET LP8A INTERFACE CN986-CN201 1 - - - - 311
12 DC020172200 H-CON SET LP8A IR CN603-CN900 1 - - - - 312
13 DC020172300 H-CON SET LP8A KEY CN911-CN600 1 - - - - 313
14 DC020172400 H-CON SET LP8A SP(2P) CN802-SP R 1 - - - - 314
15 DC020172500 H-CON SET LP8A SP(3P) CN801-SP L 1 - - - - 315
* 16 DC020166010 H-CON SET HP8C FILTER PPU1-POWER CN62 R1 1 - - - - 316
* 17 DC020166110 H-CON SET HP8C FILTER PSW-MSW ESW R1 1 - - - - 317
* 18 DC020166210 H-CON SET HP8C FILTER PPU2-EMI FILTER R1 1 - - - - 318
19 DC020169010 H-CON SET HP8C PANEL P1-POWER CN801 R1 1 - - - - 319
* 20 DC020169110 H-CON SET HP8C PANEL P6-POWER CN805 R1 1 - - - - 320
21 DC020169210 H-CON SET HP8C PANEL P5-POWER CN806 R1 1 - - - - 321
22 DC020172600 H-CON SET LP8A LVPS CN604-P31 1 - - - - 322
23 DC152000610 CLIP CORE TDK ZCAT2032-0930-BK 2169514 1 - - - - 327
24 DC554200100 PDP FILT 42 MITSUI KS08361K 1 - - - - 328
25 NA100901600 WIRE SET W7.6X90X4.1D(LOCK) 1015#18 Y/G 1 - - - - 329
26 NA103300200 WIRE SET 4.1DX330X4.1D(LOCK)1015#18 GRN 1 - - - - 330
27 PK101V00600 PWR MODU MURATA MPF7414 PDP 1 - - - - 332
* 28 NA200150000 NET WIR SET 4.3DX15X4.3D 144C/.12 TUBE 4 - - - - 333 333 333 333
* 29 NA200450000 NET SET 4.3DX45X4.3D 144C/.12 TUBE 3 - - - - 334 334 334
* 30 NA200950000 NET WIRE SET 4.3DX95X4.3D 144C/.12 TUBE 7 - - - - 335 335 335 335 335 335
335
31 454ABE30001 PCBA KEY/B VPD-K422 WLP8AG 1 - - - - 351
32 453ABE30001 PCBA AC-FILTER/B VPD-P422 WLP8AG 1 - - - - 352
33 455ABA30001 PCBA AC-SW/B VPD-422PW WLP8A 1 - - - - 353
34 455ABB30001 PCBA SP-SPL/B VPD-422SPL WLP8AG 1 - - - - 356
35 455ABC30001 PCBA SP-SPR/B VPD-422SPR WLP8AG 1 - - - - 357
36 455ABE30001 PCBA INTERFACE/B VPD-J422 WLP8AG 1 - - - - 358
37 461ABE30001 FIRMWARE FORMATTER/B VPD-L422 WLP8AG C-E 1 - - - - 359
38 454ABF30001 PCBA IR/B VPD-422IR WLP8AG 1 - - - - 360
39 51A16630001 TUNER BOX ASSY WLP8AG FOR USA 1 - - - - 361
40 X66ARF30001 MEC PARTS C-E WLP8AG FOR USA 1 - - - - 362
End of Report
56
13.1.11.4 Material List by Location
Date: 07/04/04
Time: 10:45:52
R/N:ydr6069j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 51A166 REV. 0B
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 51A16630001 TUNER BOX ASSY WLP8AG FOR USA
1 ECLV8326000 TUNER SHIELD SECC 0.8MM 1 - - - - 101
2 ECLP8A18100 TUNER SHIELD TOP LP8A18 SECC MSV49 1 - - - - 102
* 3 MAA70014300 SCREW M3X0.5+5C-ZK LOCK 10 - - - - 105 105 105 105 105 105
105 105 105 105
* 4 MAB80010300 TAPPING SCREW TPB-3+10B-ZK 5 - - - - 106 106 106 106 106
* 5 455ABI30001 PCBA TUNER/B VPD-N422 Pb Free WLP8A 1 - - - - 152
End of Report
57
13.1.11 Material List by Parts-no
Date: 06/21/04
Time: 18:08:51
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 461ABE REV. 1A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 461ABE30001 FIRMWARE FORMATTER/B VPD-L422 WLP8AG C-E
# 461ABE88001 FIRMWARE FORMATTER/B VPD-L422 WLP8SA J88-SEARS
1 451ABE30001 PCBA FORMATTER/B VPD-L422 WLP8A 1 - - - - ZZZ
2 451ABE88001 PCBA FORMATTER/B VPD-L422 WLP8SA - 1 - - - ZZZ
3 BFLP8AG0000 FIRMWARE FW WLP8AG 1 - - - - XU500
4 BFLP8SG0000 FIRMWARE FW WLP8SA - 1 - - - XU500
End of Report
58
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 16:47:28
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 455ABI REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 455ABI30001 PCBA TUNER/B VPD-N422 Pb Free WLP8A 1C
# 455ABI88001 PCBA TUNER/B VPD-N422 Pb Free WLP8SA 1C
1 435ABI30001 SMT TUNER/B VPD-N422 Pb Free WLP8A 1 - - - - ZZZ
2 435ABI88001 SMT TUNER/B VPD-N422 Pb Free WLP8SA - 1 - - - ZZZ
3 BD120000004 CRYSTAL 20MHZ 1 1 - - - X700
4 CB00106M210 ELE CAP 1U 50V M B P2 L3.5 5X11 2000h 4 4 - - - C523 C705 C711 C739
5 CB01003M100 ECE CAP 10U 16V M A P2.0 L3.5 5X11 1 1 - - - C521
6 CB01004M210 ELE CAP 10U 25V M B P2 L3.5 5X11 2000h 16 16 - - - C522 C706 C709 C717 C725 C735
C740 C746 C803 C804 C807 C813
C815 C817 C819 C825
* 7 CB04703M210 ELE CAP 47U 16V M B P2 L3.5 5X11 2000h 10 10 - - - C602 C603 C604 C605 C702 C730
C736 C752 C830 C832
8 CB047B6M300 ELE CAP 0.47U 50V M A P2.0 L4.5 5X11 5 5 - - - C810 C814 C816 C818 C820
* 9 CB047B6M400 ELE CAP .47U 50V MBP2.0L3.5 5X11YXAJPN 1 1 - - - C828
* 10 CB10003M210 ELE CAP 100U 16V M B P2 L3.5 5X11 2000 10 10 - - - C503 C506 C510 C514 C515 C517
C747 C751 C824 C826
* 11 CB10013M400 ELE CAP 1000U 16V MBP5L3.5 10X20 2000h 4 4 - - - C519 C742 C744 C749
12 CB220024200 ECE CAP 220U 10V M A P2.5 L3.5 6X11 4 4 - - - C501 C504 C508 C511
13 CB47003M510 ELE CAP 470U 16V MBP3.5 L3.5 8X11 2000 3 3 - - - C525 C704 C802
14 CC022085111 RESISTOR (CEMENT) 5W 22 +-5% (SQM) 2 2 - - - R508 R509
15 DC030043500 WAFER ELCO 10-5061-050-101-856 90D 1 1 - - - CN602
16 DC232400000 CONN SG R/A RCA R/W R/W 4P 1 1 - - - CN600
17 DC232400100 CONN SG R/A RCA BLK/Y R/W 4P 1 1 - - - CN605
18 DC232600110 CONN SG R/A RCA R/BLU/G R/BLU/G 6P 1 1 - - - CN604
19 DC232600200 CONN JC R/A RCA+S W/SW R/B/G DULE 1 1 - - - CN601
20 PK310001000 TUNER ENGF6301G NTSC MAT W/SPLIT 1 1 - - - T500
21 PK310001100 TUNER ENG36A04G NTSC MAT 1 - - - - T501
59
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 16:47:28
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 455ABI REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 435ABI30001 SMT TUNER/B VPD-N422 Pb Free WLP8A
# 435ABI88001 SMT TUNER/B VPD-N422 Pb Free WLP8SA
1 DA2LP8AV312 PCB LP8A VPD-N422 REV1B Pb Free 1 1 - - - ZZZ
2 SA010310000 S IC MM1031XMR MMP-4 AMP 6DB 1 1 - - - IC500
3 SA011170200 S IC APL1117-25 SOT-223 2.5V 1 1 - - - U702
4 SA011170300 S IC APL1117-33VC-TR SOT-223 3.3V 1 1 - - - U701
5 SA011170410 S IC APL1117-UC SOT-252 ADJ 2 2 - - - U500 U700
6 SA020690000 S IC CXA2069Q QFP-64 AUDIO/VIDEO SW 1 1 - - - IC800
7 SA640840000 S IC UPD64084GC-8EA-ALQFP-100FILTER 1 1 - - - U703
8 SB11576000H SM TRANSISTOR 2SA1576-T106-R 9 9 - - - Q700 Q701 Q703 Q704 Q707 Q708
Q710 Q711 Q714
9 SB34081000H SM TRANSISTOR 2SC4081-T106-R 13 13 - - - Q702 Q705 Q706 Q709 Q712 Q713
Q800 Q801 Q802 Q803 Q804 Q805
Q806
10 SB7700200T5 SM TRANSISTOR 2N7002 2 2 - - - Q500 Q510
11 SC10QS042T4 S DIO EC10QS04 1 1 - - - D700
12 SC6BAV99100 S DIO POW BAV99(JE) 2P SOT-23 24 24 - - - D702 D703 D704 D705 D706 D707
D708 D709 D710 D711 D712 D713
D714 D715 D716 D717 D718 D719
D720 D721 D722 D723 D724 D725
13 SD0130000T4 CHIP RES. 1/16W 0 +5% 0603 21 21 - - - R500 R501 R502 R506 R507 R510
R700 R800 R810 R812 R813 R814
R815 R819 R823 R825 R841 R842
R857 R859 R861
14 SD0131000T9 CHIP RES. 1/16W 100 +-5% 0603 S9 2 2 - - - R735 R736
15 SD0131001T6 CHIP RES. 1/16W 1K +-5% 0603 S9 5 5 - - - R702 R706 R722 R724 R817
16 SD0131002T3 CHIP RES. 1/16W 10K +-5% 0603 S9 1 1 - - - R741
17 SD0131003T1 CHIP RES. 1/16W 100K +-5% 0603 S9 1 1 - - - R708
18 SD013100AT9 CHIP RES. 1/16W 10 +-5% 0603 S9 2 2 - - - R717 R731
19 SD013150100 CHIP RES. 1/16W 1.5K +-5% 0603 S9 7 7 - - - R807 R808 R809 R811 R821 R826
R843
20 SD013180106 CHIP RES. 1/16W 1.8K +-5% 0603 S9 1 1 - - - R738
21 SD0132200T4 CHIP RES. 1/16W 220 +-5% 0603 S9 4 4 - - - R711 R718 R725 R732
22 SD0132201T1 CHIP RES. 1/16W 2.2K +-5% 0603 S9 1 1 - - - R714
23 SD013220302 CHIP RES. 1/16W 220K +-5% 0603 S9 1 1 - - - R713
24 SD013270105 CHIP RES. 1/16W 2.7K +-5% 0603 S9 2 2 - - - R504 R505
25 SD0133301T1 CHIP RES. 1/16W 3.3K +-5% 0603 S9 1 1 - - - R744
26 SD0133302T9 CHIP RES. 1/16W 33K +-5% 0603 S9 1 1 - - - R737
27 SD013360000 CHIP RES. 1/16W 360 +-5% 0603 1 1 - - - R727
28 SD0134700T1 CHIP RES. 1/16W 470 +-5% 0603 S9 9 9 - - - R704 R712 R715 R716 R720 R729
R730 R742 R743
29 SD0134701T8 CHIP RES. 1/16W 4.7K +-5% 0603 S9 3 3 - - - R703 R707 R723
60
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 16:47:28
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 455ABI REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
30 SD0134702T5 CHIP RES. 1/16W 47K +-5% 0603 S9 1 1 - - - R701
31 SD0134703T2 CHIP RES. 1/16W 470K +-5% 0603 S9 11 11 - - - R601 R602 R603 R604 R869 R870
R871 R872 R873 R874 R875
32 SD013470A07 CHIP RES. 1/16W 47 +-5% 0603 S9 2 2 - - - R705 R721
33 SD0135600T0 CHIP RES. 1/16W 560 +-5% 0603 S9 2 2 - - - R710 R728
34 SD0135601T7 CHIP RES. 1/16W 5.6K +-5% 0603 S9 2 2 - - - R719 R733
35 SD013620000 CHIP RES. 1/16W 620 +-5% 0603 1 1 - - - R822
* 36 SD013680AT5 CHIP RES. 1/16W 68 +-5% 0603 S9 1 1 - - - R842
37 SD013820000 CHIP RES. 1/16W 820 +-5% 0603 1 1 - - - R740
38 SD014100009 CHIP RES. 1/16W 100 +-1% 0603 S9 2 2 - - - R511 R745
39 SD014300008 CHIP RES. 1/16W 300 +-1% 0603 S9 1 1 - - - R513
40 SD014620002 CHIP RES. 1/16W 620 +-1% 0603 1 1 - - - R746
* 41 SD014750A03 CHIP RES. 1/16W 75 +-1% 0603 27 27 - - - R514 R515 R709 R726 R802 R804
R805 R806 R820 R824 R828 R844
R845 R846 R847 R848 R849 R850
R851 R852 R853 R854 R855 R856
R858 R860 R868
42 SE024100FT1 CHIP CERAMIC CAP. 10P 50V +-1PF NPO 0603 S8 1 1 - - - C808
43 SE024102J00 CHIP CERAMIC CAP. 1000P 50V J NPO 0603 1 1 - - - C707
44 SE024220JT7 CHIP CERAMIC CAP. 22P 50V +-5% NPO 0603 S8 4 4 - - - C708 C715 C724 C728
* 45 SE025222KT3 CHIP CERAMIC CAP. 2200P 50V +-10% X7R 0603 S8 14 14 - - - C833 C835 C836 C837 C838 C839
C840 C841 C842 C844 C845 C846
C847 C848
46 SE025561K00 CHIP CERAMIC CAP. 560P 50V K X7R 0603 1 1 - - - C712
47 SE025821K01 CHIP CERAMIC CAP. 820P 50V K X7R 0603 S8 1 1 - - - C713
48 SE026104K01 CHIP CERAMIC CAP. .1U 16V K X7R 0603 S8 3 3 - - - C516 C518 C827
49 SE026473K06 CHIP CERAMIC CAP. .047U 16V K X7R 0603 S8 1 1 - - - C700
50 SE027104NT0 CHIP CERAMIC CAP. .1U 16V -20+80% Y5V 0603 S8 35 35 - - - C502 C505 C509 C513 C701 C703
C710 C714 C716 C718 C719 C720
C721 C722 C723 C726 C727 C729
C731 C732 C733 C734 C737 C738
C741 C743 C745 C748 C750 C753
C754 C755 C800 C821 C822
51 SH015100K00 S COIL 10uH +-10% NLC322522T BA00707R 4 4 - - - L700 L702 L703 L704
52 SH015181K00 S COIL 180uH +-10% NLC322522T 3L 1 1 - - - L800
53 SH01547AM00 S COIL 4.7uH +-20%NLC322522T BA00706R 1 1 - - - L801
54 SH01556AK00 S COIL 5.6uH +-10% NLC322522T 3L 1 1 - - - L701
* 55 SM010006300 CHIP EMI SUPPRESSOR MURATA BLM21P300S (0805) 15 15 - - - L500 L501 L600 L601 L603 L604
L605 L606 L608 L609 L610 L611
L612 L613 L809
* 56 SM01V000200 S SUPPRE_ STEWARD HI0805N310R-00 (0805) 2 2 - - - FB811 L804
57 SM12V000000 S LC FILT TOKO H354LAI-8113 2 2 - - - FL700 FL701
58 SM12V000100 S LC FILT TOKO H354LAI-8464 1 1 - - - FL702
End of Report
61
13.1.11 Material List by Parts-no
Date: 07/15/04
Time: 16:14:14
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 455ABE REV. 1B
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30
001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 455ABE30001 PCBA INTERFACE/B VPD-J422 WLP8AG 1B
* 1 DA2LP8AV111 PCB LP8A VPD-J422 REV1A Pb Free 1 - - - - ZZZ
2 DC010020700 HOUSING ELCO 20-5061-050-101-856 90D 1 - - - - CN980
3 DC03E002600 WAFER E&T 4500-07 7P P2.0 1 - - - - CN984
4 DC03E002610 WAFER E&T 4500-13 13P P2.0 1 - - - - CN982
5 DC03E002640 WAFER E&T 4500-12 12P P2.0 1 - - - - CN986
6 DC03E002650 WAFER E&T 4500-11 11P P2.0 1 - - - - CN989
7 DC03E002690 WAFER E&T 4500-03 3P P2.0 1 - - - - CN987
8 DC03E0026E0 WAFER E&T 4500-14 14P P2.0 1 - - - - CN988
9 DC03E0026F0 WAFER E&T 4500-15 15P P2.0 1 - - - - CN985
10 DC03E003990 WAFER E&T 4602-09 9P P2.5 1 - - - - CN983
11 DC03E0039D0 WAFER E&T 4602-13 13P P2.5 1 - - - - CN981
End of Report
62
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 451ABE30001 PCBA FORMATTER/B VPD-L422 WLP8A 1C
# 451ABE88001 PCBA FORMATTER/B VPD-L422 WLP8SA 1C
1 431ABE30001 SMT FORMATTER/B VPD-L422 WLP8A 1 - - - - ZZZ
2 431ABE88001 SMT FORMATTER/B VPD-L422 WLP8SA - 1 - - - ZZZ
3 AB020200000 IC TA2020-020 SSIP-32 AUDIO AMP 1 1 - - - U810
4 BD113P5M000 CRYSTAL 13.5MHZ HC-49/US 30PPM 20PF 1 1 - - - X400
5 BD114P3M020 CRTSTAL 14.31818MHZ HC-49/S +-30PPM 20 1 1 - - - X600
6 BD118P43200 CRYSTAL 18.432MHZ 49/US +-30PPM 20PF 1 1 - - - X700
7 BD120P25000 CRYSTAL 20.25MHZ HC-49/US +-30PPM 20PF 2 2 - - - X200 X500
* 8 CB00106M210 ELE CAP 1U 50V M B P2 L3.5 5X11 2000h 2 2 - - - C851 C852
9 CB10013M400 ELE CAP 1000U 16V MBP5L3.5 10X20 2000h 1 1 - - - C850
10 CB47003M510 ELE CAP 470U 16V MBP3.5 L3.5 8X11 2000 2 2 - - - C848 C849
11 CJ010A6J0T0 FILM CAP 1U 50V J MEF P5 4 4 - - - C853 C854 C855 C856
12 CJ022B600T1 MYLAR CAP. .22U 50V +-5% MEF P5 2 2 - - - C857 C858
13 CL340003100 CHOK COIL SHV828H 10uH M 8X10X4 17.5TS 4 4 - - - L814 L815 L816 L817
14 CL900007700 LINE FILT SHV828H 7uH MIN T4.4X2.8X2.5 2 2 - - - L820 L821
15 DC03E002600 WAFER E&T 4500-07 7P P2.0 1 1 - - - CN803
16 DC03E002610 WAFER E&T 4500-13 13P P2.0 1 1 - - - CN800
17 DC03E002620 WAFER E&T 4500-04 4P P2.0 2 - - - - CN501 CN602
18 DC03E002630 WAFER E&T 4500-10 10P P2.0 1 1 - - - CN600
19 DC03E002640 WAFER E&T 4500-12 12P P2.0 1 1 - - - CN201
20 DC03E002650 WAFER E&T 4500-11 11P P2.0 1 1 - - - CN203
21 DC03E002670 WAFER E&T 4500-06 6P P2.0 1 1 - - - CN603
22 DC03E002690 WAFER E&T 4500-03 3P P2.0 1 1 - - - CN204
23 DC03E0026E0 WAFER E&T 4500-14 14P P2.0 1 1 - - - CN202
24 DC03E0026F0 WAFER E&T 4500-15 15P P2.0 1 1 - - - CN200
25 DC03E003300 WAFER E&T 4600-02 2P P2.5 1 1 - - - CN802
26 DC03E003330 WAFER E&T 4600-03 3P P2.5 1 1 - - - CN801
27 DC060014010 CONN. 24P FEMALE 74320-4004 1 1 - - - CN100
28 DC060015230 C-CONN 15P FEMALE 1222-15-2 R/A BLU 1 1 - - - CN101
1 - - - - CN102
29 DC060015240 CONN 9P MALE 1201-09 R/A BLK (S) 1 - - - - CN500
30 DC1510023T0 BEAD KC K5B RH 3.5X5X0.8-P-T 1 1 - - - L818
31 DC230201200 CONNECTOR SC SCJ-0345-1-X-S 3.6D 2 2 - - - CN700 CN701
32 LCHV2843100 HEAT SINK HV2843 1 1 - - - H800
33 MAA70000018 SCREW M3X0.5+8C-NI 2 2 - - - &H800 &H800
34 SA290400200 S IC EEPROM PLCC-32 S29C31004T-90J 1 1 - - - U603
63
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 431ABE30001 SMT FORMATTER/B VPD-L422 WLP8A
# 431ABE88001 SMT FORMATTER/B VPD-L422 WLP8SA
1 DA6LP8AV011 PCB LP8A VPD-L422 REV1A Pb Free 1 1 - - - ZZZ
* 2 SA008090620 SM IC FM809 SOT-23 2.93V RST 1 1 - - - U402
3 SA010840230 S IC AIC1084-1.8 TO-252 1.8V 2 2 - - - U800 U805
4 SA010840240 S IC AIC1084-2.5 TO-252 2.5V 1 1 - - - U801
5 SA010850500 S IC APL1085-33CE TO252-3 REG.3A 4 4 - - - U802 U803 U804 U807
6 SA011170900 S IC AIC1117-5.0 SOT223 1 1 - - - U806
7 SA0160100P0 S IC GM1601-LF-BD PBGA-416 SCALER 1 1 - - - U600
8 SA0231000P0 S IC FLI2310-LF-BD PQFP-208 DIGITAL 1 1 - - - U400
9 SA023860000 S IC EL2386CS SOIC-16 BUFFER 1 - - - - U106
10 SA024210300 SM IC EE 128X8 SOP-8 24LC21A 2 2 - - - U101 U102
11 SA024320000 S IC EE 32K SO-8 24LC32 1 1 - - - U604
12 SA032300000 S IC VPC3230 PQFP-80 DECODE 2 2 - - - U200 U500
13 SA032570000 S IC ADG3257 SOP-169 MUX 1 1 - - - U105
14 SA034500000 S IC MSP3450G AUDIO PROCESS LQFP64 1 1 - - - U700
15 SA053010000 S IC SM5301AS HSOP-28 FILTER 1 1 - - - U100
16 SA074140302 SM IC SN74LVC14APWLE TSSOP14 S-INV 1 1 - - - U104
17 SA078050100 SM IC NJM7805DLA TO-252 REG. 1 1 - - - U702
18 SA078080000 S IC 78M08 TO-252 8V 1 1 - - - U701
19 SA081860000 S IC AD8186 TSSOP-24 SW 1 1 - - - U103
20 SA142320000 S IC DS14C232CMX SOP-16DRIVER/RECEI 1 - - - - U502
21 SA411260110 S IC 74LVC1G126GW-115 SOT-353 2 - - - - U107 U108
22 SA440530110 S IC 74HC4053D 653 SOT109 1 1 - - - U703
23 SA604000000 S IC TPS60400DBV SOT23 UNREGULATOR 1 - - - - U808
24 SA624000000 S IC BS62LV4006SC-70 1 - - - - U303
25 SA643220000 S IC HY57V643220CT-6 166MHZ TSSOP86 1 1 - - - U401
26 SA832220000 S IC HY5DU283222AF-33 FBGA-144 1 1 - - - U601
27 SA862290000 S IC Z86229 SO-18 DECODER 2 2 - - - U300 U501
* 28 SB039040010 SM TR PMBT3904 SOT23 14 14 - - - Q300 Q301 Q302 Q303 Q501 Q502
Q503 Q504 Q600 Q602 Q603 Q700
Q801 Q803
29 SB0390400T5 SM TRANSISTOR MMBT3904 (S0T-23) 1 1 - - - Q804
30 SB301140310 S TR DTC114EE NPN (EMT3) 1 1 - - - Q805
31 SB308480000 S TR BC848B NPN SOT-23 2 2 - - - Q304 Q505
32 SB34617000Y SM TRANSISTOR 2SC4617 NPN EMT-3 2 2 - - - Q200 Q201
33 SB7700200T5 SM TRANSISTOR 2N7002 2 2 - - - Q500 Q506
34 SB932030000 S TR BSH203 P SOT-23 1 1 - - - Q601
35 SC10QS042T4 S DIO EC10QS04 3 3 - - - D100 D101 D102
36 SC1B491D000 SM DIODE RB491D SOT-23 4 4 - - - D802 D803 D804 D805
37 SC1SU277000 S DIO HSU277TRF (URP) BAND SW 2 2 - - - D200 D201
38 SC4LZ62C0T1 SM ZENER DIODE RLZ6.2C (LL-34) 2 - - - - D113 D114
64
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
39 SC6BAV99100 S DIO POW BAV99(JE) 2P SOT-23 11 11 - - - D103 D104 D105 D106 D107 D108
D109 D700 D701 D702 D703
5 - - - - D110 D111 D112 D500 D501
40 SD0010000T4 CHIP RES. 1/8W 0 +5% 1206 1 1 - - - R841
41 SD010000000 S RES 1/8W 0 +-1% 0805 6 6 - - - FB204 FB400 FB402 FB406 FB505 FB600
* 42 SD0130000T4 CHIP RES. 1/16W 0 +5% 0603 23 23 - - - R143 R144 R316 R417 R517 R553
R605 R606 R621 R626 R627 R628
R629 R631 R633 R634 R635 R639
R648 R649 R650 R651 R822
2 - - - - R154 R155
43 SD0131000T9 CHIP RES. 1/16W 100 +-5% 0603 S9 32 32 - - - R104 R105 R110 R117 R136 R139
R321 R322 R323 R325 R409 R410
R411 R412 R522 R523 R524 R526
R640 R641 R643 R644 R646 R710
R711 R820 R826 R827 R832 R833
R836 R837
2 - - - - R549 R550
44 SD0131001T6 CHIP RES. 1/16W 1K +-5% 0603 S9 29 29 - - - R222 R302 R305 R308 R311 R312
R313 R314 R315 R328 R418 R503
R506 R509 R512 R513 R514 R515
R516 R529 R624 R625 R636 R738
R739 R749 R808 R809 R818
45 SD0131002T3 CHIP RES. 1/16W 10K +-5% 0603 S9 31 31 - - - R100 R101 R102 R103 R107 R111
R112 R115 R129 R134 R150 R224
R320 R359 R415 R416 R521 R600
R608 R615 R616 R741 R742 R743
R744 R746 R747 R748 R750 R751
R812
46 SD0131003T1 CHIP RES. 1/16W 100K +-5% 0603 S9 10 10 - - - R106 R108 R146 R223 R226 R734
R735 R736 R737 R803
47 SD0131004T8 CHIP RES. 1/16W 1M +-5% 0603 S9 8 8 - - - R722 R723 R724 R725 R726 R727
R728 R851
48 SD013100AT9 CHIP RES. 1/16W 10 +-5% 0603 S9 1 1 - - - R700
49 SD0131202T4 CHIP RES. 1/16W 12K +-5% 0603 S9 2 2 - - - R317 R518
50 SD013160200 CHIP RES. 1/16W 16K +-5% 0603 2 2 - - - R805 R807
51 SD0132200T4 CHIP RES. 1/16W 220 +-5% 0603 S9 1 1 - - - R817
52 SD0132201T1 CHIP RES. 1/16W 2.2K +-5% 0603 S9 13 13 - - - R140 R141 R220 R705 R706 R712
R713 R716 R717 R720 R721 R819
R850
53 SD0132202T9 CHIP RES. 1/16W 22K +-5% 0603 S9 2 2 - - - R324 R525
54 SD0132203T6 CHIP RES. 1/16W 220K +-5% 0603 S9 1 1 - - - R225
55 SD013220AT4 CHIP RES. 1/16W 22 +-5% 0603 S9 12 12 - - - R201 R318 R400 R403 R404 R405
R406 R407 R408 R413 R519 R536
56 SD0132701T9 CHIP RES. 1/16W 2.7K +-5% 0603 S9 7 7 - - - R500 R533 R607 R609 R617 R652
R840
57 SD013330AT4 CHIP RES. 1/16W 33 +-5% 0603 S9 1 1 - - - R604
58 SD0134700T1 CHIP RES. 1/16W 470 +-5% 0603 S9 1 1 - - - R114
65
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
59 SD0134701T8 CHIP RES. 1/16W 4.7K +-5% 0603 S9 5 5 - - - R221 R613 R614 R732 R813
60 SD0134703T2 CHIP RES. 1/16W 470K +-5% 0603 S9 3 3 - - - R401 R848 R849
61 SD0135601T7 CHIP RES. 1/16W 5.6K +-5% 0603 S9 5 5 - - - R654 R810 R811 R846 R847
62 SD013560201 CHIP RES. 1/16W 56K +-5% 0603 S9 2 2 - - - R804 R806
63 SD013680109 CHIP RES. 1/16W 6.8K +-5% 0603 S9 2 2 - - - R331 R532
64 SD013750000 CHIP RES. 1/16W 750 +-5% 0603 S9 6 - - - - R153 R156 R157 R159 R160 R163
65 SD013750AT3 CHIP RES. 1/16W 75 +-5% 0603 S9 8 8 - - - R300 R303 R306 R309 R501 R504
R507 R510
66 SD013820000 CHIP RES. 1/16W 820 +-5% 0603 8 8 - - - R301 R304 R307 R310 R502 R505
R508 R511
67 SD013820105 CHIP RES. 1/16W 8.2K +-5% 0603 S9 1 1 - - - R802
68 SD014100106 CHIP RES. 1/16W 1K +-1% 0603 S9 1 1 - - - R816
69 SD014100203 CHIP RES. 1/16W 10K +-1% 0603 S9 4 4 - - - R330 R531 R610 R611
70 SD014120000 S RES 1/16W 120 +-1% 0603 2 2 - - - R205 R206
71 SD014140000 S RES 1/16W 140 +-1% 0603 1 1 - - - R603
72 SD014180000 CHIP RES. 1/16W 180 +-1% 0603 5 5 - - - R207 R208 R210 R212 R217
73 SD014180A00 S RES 1/16W 18 +-1% 0603 4 4 - - - R137 R142 R147 R149
74 SD014187000 S RES 1/16W 187 +-1% 0603 1 1 - - - R402
75 SD014200A00 CHIP RES. 1/16W 20 +-1% 0603 6 6 - - - R116 R118 R120 R125 R126 R127
76 SD014249000 CHIP RES. 1/16W 249 +-1% 0603 1 1 - - - R601
77 SD014330101 CHIP RES. 1/16W 3.3K +-1% 0603 14 14 - - - R109 R113 R119 R121 R122 R130
R131 R132 R133 R135 R148 R151
R602 R612
78 SD014470000 S RES 1/16W 470 +-1% 0603 11 11 - - - R551 R552 R701 R702 R703 R708
R709 R714 R715 R718 R719
79 SD014560A00 CHIP RES. 1/16W 56 +-1% 0603 3 3 - - - R138 R145 R152
80 SD014750A03 CHIP RES. 1/16W 75 +-1% 0603 26 26 - - - R123 R124 R128 R200 R202 R203
R204 R209 R211 R213 R214 R215
R216 R218 R326 R329 R527 R530
R534 R535 R537 R538 R543 R544
R545 R546
3 - - - - R158 R161 R162
81 SD014820A00 S RES 1/16W 82 +-1% 0603 6 6 - - - R327 R528 R539 R540 R541 R542
82 SD016100AT0 CHIP RES. 1/2W 10 +-5% 2010 2 2 - - - R814 R815
83 SD302000000 CHIP NETWORK RES. 1/16W 0 +-5% 8P-4R SA 8 8 - - - RN400 RN402 RN404 RN406 RN408 RN410
RN412 RN413
84 SD3021002T2 CHIP NETWORK RES. 1/16W 10K +-5% 8P-4R SA 3 3 - - - RN614 RN615 RN616
85 SD302220A00 CHIP NETWORK RES. 1/16W 22 +-5% 8P-4R SA 1 1 - - - RN414
86 SD302330AT3 CHIP NETWORK RES. 1/16W 33 +-5% 8P-4R SA 24 24 - - - RN200 RN201 RN401 RN403 RN405 RN407
RN409 RN411 RN500 RN501 RN600 RN601
RN602 RN603 RN604 RN605 RN606 RN607
RN608 RN609 RN610 RN611 RN612 RN613
87 SE021226Z00 S CER CAP 22U 16V Z Y5V 1206 48 48 - - - C104 C115 C124 C125 C133 C134
C145 C200 C201 C204 C211 C212
C225 C233 C300 C308 C310 C404
C405 C417 C431 C441 C442 C451
C452 C500 C501 C509 C511 C513
C516 C523 C524 C537 C543 C600
66
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
C601 C616 C617 C633 C634 C650
C680 C691 C696 C700 C705 C707
88 SE024101JT8 CHIP CERAMIC CAP. 100P 50V +-5% NPO 0603 S8 3 3 - - - C139 C140 C838
89 SE024121JT9 CHIP CERAMIC CAP. 120P 50V J NPO 0603 S8 2 2 - - - C839 C840
90 SE024181JT1 CHIP CERAMIC CAP. 180P 50V +-5% NPO 0603 S8 8 8 - - - C250 C251 C252 C253 C587 C588
C589 C590
91 SE024220JT7 CHIP CERAMIC CAP. 22P 50V +-5% NPO 0603 S8 2 2 - - - C656 C657
92 SE024221JT3 CHIP CERAMIC CAP. 220P 50V +-5% NPO 0603 S8 1 1 - - - C755
93 SE024330J11 CHIP CERAMIC CAP. 33P 50V +-5% NPO 0603 S8 3 3 - - - C142 C400 C401
94 SE024331JT3 CHIP CERAMIC CAP. 330P 50V +-5% NPO 0603 S8 7 7 - - - C762 C763 C764 C765 C766 C767
C768
95 SE02433AJ00 CHIP CERAMIC CAP. 3.3P 50V +-5% NPO 0603 2 2 - - - C730 C731
96 SE024470JT3 CHIP CERAMIC CAP. 47P 50V +-5% NPO 0603 S8 2 - - - - C551 C552
97 SE02447AJ00 CHIP CERAMIC CAP. 4.7P 50V J NPO 0603 4 4 - - - C209 C210 C521 C522
98 SE024560JT2 CHIP CERAMIC CAP. 56P 50V +-5% NPO 0603 S8 3 3 - - - C732 C733 C737
99 SE024820JT4 CHIP CERAMIC CAP. 82P 50V +-5% NPO 0603 S8 17 17 - - - C246 C455 C456 C457 C458 C459
C559 C709 C710 C711 C712 C713
C714 C715 C716 C717 C718
100 SE025102K12 CHIP CERAMIC CAP. 1000P 50V K X7R 0603 S8 15 15 - - - C734 C735 C743 C744 C748 C749
C769 C770 C783 C784 C785 C786
C787 C788 C789
101 SE025103KT4 CHIP CERAMIC CAP. .01U 50V +-10% X7R 0603 S8 10 10 - - - C103 C114 C116 C117 C118 C119
C120 C121 C207 C519
2 - - - - C149 C150
102 SE025152KT5 CHIP CERAMIC CAP. 1500P 50V +-10% X7R 0603 S8 11 11 - - - C202 C214 C222 C237 C514 C526
C534 C546 C740 C754 C773
103 SE025222KT3 CHIP CERAMIC CAP. 2200P 50V +-10% X7R 0603 S8 12 12 - - - C254 C255 C365 C584 C586 C591
C592 C799 C878 C879 C880 C881
104 SE025271KT4 CHIP CERAMIC CAP. 270P 50V K X7R 0603 S8 8 8 - - - C360 C361 C362 C363 C580 C581
C582 C583
105 SE025391K00 CHIP CERAMIC CAP. 390P 50V K X7R 0603 4 4 - - - C213 C235 C525 C544
106 SE025471KT3 CHIP CERAMIC CAP. 470P 50V +-10% X7R 0603 S8 8 8 - - - C304 C305 C505 C506 C585 C739
C756 C774
107 SE025682K00 CHIP CERAMIC CAP. 6800P 50V K X7R 0603 2 2 - - - C311 C512
108 SE026104K01 CHIP CERAMIC CAP. .1U 16V K X7R 0603 S8 210 210 - - - C100 C102 C105 C106 C107 C108
C110 C112 C113 C122 C123 C126
C127 C128 C129 C131 C135 C137
C138 C141 C143 C144 C146 C147
C148 C206 C208 C223 C236 C244
C245 C302 C306 C307 C402 C403
C407 C408 C409 C410 C411 C412
C413 C414 C415 C416 C419 C420
C421 C422 C423 C424 C425 C426
C427 C428 C429 C430 C432 C433
C434 C435 C436 C437 C438 C439
C440 C443 C444 C445 C446 C447
C448 C449 C450 C453 C503 C507
C508 C518 C520 C535 C545 C602
67
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
C603 C604 C605 C606 C607 C608
C609 C610 C611 C612 C613 C614
C615 C618 C619 C620 C621 C622
C623 C624 C625 C626 C627 C628
C629 C630 C631 C632 C635 C636
C637 C638 C639 C640 C641 C642
C643 C644 C645 C646 C647 C648
C649 C651 C652 C653 C654 C655
C658 C659 C660 C661 C662 C663
C664 C665 C666 C667 C668 C669
C670 C671 C672 C673 C674 C677
C678 C679 C681 C682 C683 C684
C685 C686 C687 C688 C689 C690
C692 C693 C694 C695 C697 C698
C699 C701 C702 C703 C704 C706
C708 C742 C760 C791 C792 C795
C797 C801 C803 C805 C807 C809
C811 C813 C815 C818 C820 C821
C826 C827 C830 C833 C835 C836
C841 C842 C843 C844 C845 C847
C863 C866 C869 C875 C876 C877
9 - - - - C151 C152 C154 C155 C553 C554
C555 C556 C557
109 SE026224K00 CHIP CERAMIC CAP. .22U 16V K X7R 0603 13 13 - - - C215 C231 C234 C238 C239 C240
C241 C242 C527 C547 C548 C549
C550
110 SE026334K00 S CER CAP .33U 16V K X7R 0603 3 3 - - - C132 C301 C502
111 SE026473K06 CHIP CERAMIC CAP. .047U 16V K X7R 0603 S8 6 6 - - - C203 C218 C226 C515 C530 C538
112 SE026683KT4 CHIP CERAMIC CAP. .068U 16V K X7R 0603 S8 8 8 - - - C228 C229 C230 C309 C510 C540
C541 C542
113 SE026684K00 S CER CAP 0.68U 16V K X7R 0603 9 9 - - - C216 C219 C220 C221 C232 C528
C531 C532 C533
114 SE030105K08 CHIP CERAMIC CAP. 1U 16V K X7R 0805 4 4 - - - C243 C871 C872 C873
115 SE030225K00 S CER CAP 2.2U 16V K X7R 0805 14 14 - - - C720 C721 C722 C723 C724 C725
C746 C747 C750 C751 C752 C757
C758 C759
116 SE036106Z05 CHIP CERAMIC CAP. 10U 16V Z F(Y5V) 1206 16 16 - - - C101 C109 C111 C136 C205 C217
C227 C517 C529 C539 C676 C741
C745 C753 C796 C798
2 - - - - C153 C558
117 SF00106M000 CHIP ELE. CAP. 1U 50V M A (4X5.4) 7 7 - - - C771 C772 C776 C777 C778 C779
C781
118 SF01003M100 S ELE CAP 10U 16V M B 4DX5.7 2000hr 3 3 - - - C775 C780 C782
119 SF033A6M000 CHIP ELE. CAP. 3.3U 50V M A (4X5.4) 1 1 - - - C761
120 SF04703M110 S ELE CAP 47U 16V M B 6.3X5.7 2000hr 3 3 - - - C130 C790 C793
121 SF10003M300 S ELE CAP 100U 16V M B 6.3X5.7 2000hr(P) 27 27 - - - C504 C738 C800 C802 C804 C806
C808 C810 C812 C814 C816 C817
C819 C822 C823 C824 C825 C829
68
13.1.11 Material List by Parts-no
Date: 07/30/04
Time: 14:50:01
R/N:ydr6068j - D1H
====================================================================================================================================
QUANTITY REQUIRED DWG.NO. 451ABE REV. 1C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------------ --------------------------------------
30 88
001 001 REMARKS
- ---- ----------- ------------------------ ------------------------------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
C831 C832 C834 C864 C865 C867
C868 C870 C874
122 SF10011M200 S ELE CAP 1000U 6.3V M B 2000hr 2 2 - - - C303 C794
* 123 SM01V000200 S SUPPRE_ STEWARD HI0805N310R-00 (0805) 54 54 - - - FB200 FB201 FB202 FB203 FB205 FB206
FB300 FB401 FB403 FB404 FB405 FB500
FB501 FB502 FB503 FB504 FB506 FB507
FB700 FB701 FB800 FB801 FB802 L100
L101 L102 L200 L300 L400 L401
L402 L403 L500 L501 L700 L701
L702 L800 L801 L802 L803 L804
L805 L806 L807 L808 L809 L810
L811 L812 L813 L819 L822 L823
3 - - - - L103 L104 L503
124 SP02JV00010 S W-CONN JAE FI-TWE31PB-VF-E1400 P1.25 1 1 - - - CN604
End of Report
69