Multispectral and Surface Sampling approach to
Gold Exploration in Marble Bar, Australia
Kevin D. Box
Advisor: Dr. Jay Parish
GEOG 596ASecond Spring Semester
General Outline
• Project Objective• Background
– Criteria for economic success– Deposit Type– Deposit Deposition– Area of interest
• Methodology– Data – Work flow– Ratios
• Potential Exploration Targets• Moving Forward
Project Objective
• Utilize remote sensing techniques to identify potential gold bearing conglomerates within the Marble Bar Basin.
• Actively explore targets, identified from remote sensing, using field work and surface sampling to validate success and failures of remote sensing in exploration.
• Economic Gold Deposits– Grade
• Must be high enough to warrant mining
– Tons• Must have enough gold to warrant mining
– Geometry• Deposit must be large enough to warrant cost of mill and extraction
methods
– Depth• With excessive depth comes excessive waste and cost
The four combined factors create a formula that is the primary criteria for whether a deposit can economically be mined at a profit. Many deposits do not meet these criteria to be economically profitable.
Background
• Disseminated– Very fine grained gold dispersed through the rocks. Large
deposits and usually low grade but still economically feasible.• Carlin, Nevada• Cripple Creek, Colorado• Homestake, South Dakota
• Vein (Lode)– High grade concentration as a result of hydrothermal solutions
being forced through faults or fractures. Very high concentrations within a tight space.• Sleeper, Nevada• Mother Lode, California
Gold Deposits
• Placer– Gold deposition as a result of weathering and being moved by
water. These are usually formed with alluvial and beach systems.• California Gold Rush• Klondike, Canada• Nome, Alaska
• Paleoplacer– “Old” placers. Old placers that have been fossilized into rock.
Deposited in a sheet and can be kilometers long. Gold can be disseminated and crystalline.• Witwatersrand, South Africa
– 1.5 billion ounces– Over 4km deep
Gold Deposits
• Multiple Theories –– Placer Model
• Occurred during orogenic formation
– Hydrothermal Model• Sediments were deposited and fluids were hydrothermally
pumped into the sediment seams then compressed to reform as rock
– Microbial Model• BUGS!
– Gold concentrations in seawater during the time of deposition could have ranged from 4 – 40 ppb (compared to today of 4ppt)
– Microbes play a role in exhaling gold from seawater and creating pyrite in the process. Also could explain the formation of the high grade carbon leaders in the Witwatersrand deposit
Paleoplacer Gold Origin
Basin Sediment Deposition
Trapped Sediments Sediments Reworked in Streams
Shoreline Sediment Deposition
The three theories agree that paleoplacers are sediment deposited.
Sediment deposition
Basement Rocks
Sediment Package
VolcanicCover
Gold Bearing Conglomerate(s)
Examples of Gold Bearing Quartz Pebble Conglomerate from diamond drillingat Nullagine, WA
Pilbara Exploration
• Multiple basins identified in remote regions of Western Australia that contain potential economic sediment hosted paleoplacer gold systems similar to Witwatersrand, South Africa
• Nullagine – resource of 421k oz. inferred gold defined in 2012 from initial drilling by Novo Resources Corp. in gold bearing conglomerates
• Novo Resources Corp. exploration identified a gold bearing conglomerate on the opposite side of the basin over 1km long with grades in excess of 10 gpt up to 50 gpt at surface.
Why Australia?
Nullagine Basin
Marble Bar Basin
Historical Mining
65 k
m50 km
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Marble Bar BasinQuestion: Does the Marble Bar Basin hold the same potential as seen at Nullagine in 2012?
Over 175,000hectares (436,000 acres) of land to explore.• Historical mines (alluvial and hard
rock) in in the late 1930’s and early 1940’s on the south east flank of basin
— Tassie Queen— Just in Time— Comet
• Sporadic ground work within interior and flanks shows that favorable conditions exist from stream sediment samples in areas of easy access.
Historical Mining
65 k
m50 km
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Marble Bar BasinComplications
• Over 175,000hectares (436,000 acres) of land to explore.
• Much of the land is only accessible via helicopter, ATV or foot resulting in inadequate modern exploration.
• Sporadic ground work has been limited to easy access areas. Very little is known about the vast majority of the basin.
• Work in this region is expensive for lodging, food, and salaries
• Area covered in volcanic basalt with sediment lenses that have the potential to host gold
• Marble Bar Basin is part of the Fortescue Group consisting primarily of Archean rocks with little overlying Tertiary rocks
Basement Rocks
Sediment Package
VolcanicCover
1:100k geology map from GSWA (Geological Survey of Western Australia)
Marble Bar Geology
Marble Bar GeologyCharacteristics of the target conglomerates
• Quartz pebbles and boulders• Matrix is a mixture of silica with clays such as sericite, illite, and
smectite— Note: matrix mixture includes kaolinite. However, kaolinite is a common clay remobilized from
weathering elements such as wind and water
• Low mafic content• Low epidote, chlorite, and amphibole• Low carbonates
Remote SensingWhy choose remote sensing?
• Proven successful in identifying certain rock types where rocks are exposed
— Marble Bar sits in barren dry climate ideal for remote sensing• Inexpensive when using ASTER (Advanced Spaceborne Thermal
Emission and Reflection Radiometer) multispectral data— Covers large areas – single tile 60 km²— Contains 14 bands that cover VNIR (Visable Near Infrared), SWIR
(Shortwave Infrared) and TIR (Thermal Infrared) spectral ranges.— Spectral bands of SWIR and TIR are useful in identifying clays and silica
material— Bands can be combined into ratios based on certain mineral signatures
ASTER Spectral Ratios and Minerals
Key spectral signatures of the Marble Bar Basin• SWIR – 6 bands (channels)
— Carbonates, Clay, and Mafic
• TIR – 5 bands (channels)— Carbonates, Mafic, and Silica/Quartz
ASTER Spectral Ratios and Minerals
Spectral Example – Quartz – SiO2• Quartz Rich Rock – B14/B12
(Kalinowski, A., & Oliver, S. , 2004)
• Silica Rich Rock – B13/B10(Kalinowski, A., & Oliver, S. , 2004)
TIRBand 10
TIRBand 11
TIRBand 12
TIRBand 13
TIRBand 14
Issues with ASTER• Broad paint brush complicates supervised
classification and choosing regions of interest (ROI)— 30m pixel resolution in SWIR— 90m pixel resolution in TIR
• Line striping or smearing of image— Most common in TIR bands
• Mineral spectrums can overlap and cause misidentification
— Spectral profile comparisons are complicated• Poor imagery
— Cloud cover— Fire within imagery
Aster Imagery Workflow
Identify Area
of Interest
Acquire Imagery Layer Stack Tiles Mosaic Tiles
Create Individual Ratios Band Math
Unsupervised Classification
Analyze Results
Re-work Ratios
Review Ratio Results
Experiment Phase
Map ResultsPlan
Exploration Program
Software UsedENVI – ASTER ProcessingArcGIS - Mapping
Aster Ratios – Quartz Rich Rock
Ratio = b14/b12(Kalinowski, A., & Oliver, S. , 2004)
Highlights areas with quartz rich rocks. This can include sandstones, quartz pebble conglomerates, veins, etc.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Silica
Ratio = B13/B10(Kalinowski, A., & Oliver, S. , 2004)
Highlights areas with silica rich rocks and sands. This can include crystalline silica found in the matrix of sandstones, quartz pebble conglomerates, veins, etc.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Sericite, Muscovite, Illite, and Smectite
Ratio = (b5+b7)/b6(Kalinowski, A., & Oliver, S. , 2004)
Highlights clays or soils rich in sericite, muscovite, illite, or smectite.
**Burn areas show in SWIR bands. When analyzing you must be aware of this.
©METI and NASA 2001
Burn Area
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Mafic Rocks
Ratio = b12/b13(Kalinowski, A., & Oliver, S. , 2004)
Highlights mafic rocks such as basalt, dolerite, and gabbro. These are all extrusive or intrusive igneous rocks.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Epidote, Chlorite, and Amphibole
Ratio = (b6+b9)/(b7+b8)
Highlights areas with minerals that are associated with igneous rocks at Marble Bar.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Carbonates
Ratio = B13/B14Areas that have a high carbonate signature. Most likely remobilized calcite or calcrete.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Final Results
Band Math = (R1+R2+R3)-(R4+R5+R6)R1-Quartz Rich RockR2- SilicaR3 – Sericite, Muscovite, Illite, and SmectiteR4 – Mafic RocksR5 – Epidote, Chlorite, and AmphiboleR6- Carbonates
Highlights show potential Au bearing rocks worthy of follow ups.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Final Results with Historic Stream Sediment Data
• Historic stream sediment samples collected by multiple parties from 2005 through 2009. – Positives
• Anomalous grades or better confirm areas for potential conglomerates
– Issues:• Sampling methods unknown• Stream sediment data not
distributed evenly• Currently do not have elevation
data to perform adequate stream flow analysis
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios – Final Results with Stream Sediment Data and Geology
• Geology conforms closely with results
• Three distinct areas that are part of the Hardy Sandstone unit have different signatures.
©METI and NASA 2001
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
Aster Ratios - Targets• Areas Identified from Aster
data that show potential conglomerates– Numerous areas are showing
linear type features that could be exposed conglomerates
– Most importantly ASTER is telling us where not to go
© Harris Corp, Earthstar Geographics LLC © 2013 Microsoft Corporation
©METI and NASA 2001
Additional Items or Work
• Acquire DEM better than 30m resolution– Stream flow analysis to get a better understanding of the
sources for the stream sediment samples
• Continue to work with ASTER data throughout project– Ground work will reveal better information on modifying
ASTER ratios
• Acquire aerial multispectral data for additional analysis– Collect training sites during field work– Better resolution allowing for detailed spectral signature work
Time Line of Project
October 29-30
Present results of field work at Geological Society of America Annual Meeting, Denver Colorado
Mid July – AugustSurface samples return Evaluate results of remote
sensing work Plan Drill Program
Mid May – JulyField work ASTER changes and refinements
Late April - Early MayMet with team and began field planning Class presentation
March – AprilAcquired Imagery Research Subjects Analyzed Data
FebruaryRefined Project proposal
JanuaryProject proposal
Acknowledgements
• Dr. Jay Parish– Penn State Advisor
• Dr. Quinton Hennigh• Novo Resources Corp.– Funding and use of data
ReferencesThe ASTER L1B data was purchased through the online Data Pool at the Earth Remote Sensing Data Analysis Center (ERSDAC), (https://ims.aster.ersdac.jspacesystems.or.jp/ims/html/MaiMenu/MainMenu.html).
Department of Resources, Energy, and Tourism. (2013) Aster Spectral Bands. Retrieved 29 April 2013 from ASTER - Advanced Spaceborne Thermal Emission and Reflection Radiometer http://www.ga.gov.au/earth-observation/satellites-and-sensors/aster-radiometer.html
Hennigh, Dr. Quinton. (2013, April 30). Personal Interview Regarding Paleoplacer Deposits and the Witswatersrand Deposit. (K. Box, Interviewer)
Kalinowski, A., & Oliver, S. (2004, October). ASTER Mineral Index Processing Manual. Retrieved February 26, 2013, from Australian Government Geoscience Australia: http://www.ga.gov.au/image_cache/GA7833.pdf
Rajesh, H. M. (2004, June 28). Application of remote sensing and GIS in mineral resource mapping - An overview. Retrieved February 26, 2013, from J-STAGE - Japan Science and Technology Information Aggregator, Electronic: https://www.jstage.jst.go.jp/article/jmps/99/3/99_3_83/_pdf van der Meer, F. D., van der Werff, H. M., van Ruitenbeek, F. J., Hecker, C. A., Bakker, W. H., Noomen, M. F., et al. (2011, August 10). Multi- and Hyperspectral geologic remote sensing: A review. Retrieved March 27, 2013, from University of OULU Dashboard: https://wiki.oulu.fi/download/attachments/26687239/van-der-Meer-et-al-2012-IJAEOG.pdf?version=1&modificationDate=1352876317000
Agar, B. (n.d.). ASTER Alteration and Mineral Mapping; Las Pampas, Cajamarca, Peru. Retrieved February 26, 2013, from ASTER Altera: http://www.bygmining.com/pdf/ASTER%20Mineral%20Mapping.pdf
Questions?