Champ VMV & VMVLMounting adapters for
LED LightingChamp VMV mounting adapters
SAFE. FAST. FLEXIBLE.
Now available for
3,000 TO 25,000 LUMEN MODELS
VMV13L & VMV17L
VMV21L & VMV25L
30-60 foot mounting heights
VMV3L-VMV11L
8-30 foot mounting heights
Applications:Reliably retrofit Crouse-Hinds series Champ VMV/VMVL LED luminaires to mounts from Appleton, Thomas & Betts and GE.
Compatible with VMV LED 3L to 25L models
Features:
• Smart design saves hours of tear down and installation time
• Compact design allows for easy conversion to Crouse-Hinds series Champ VMV fixtures
• Easily convert wall and ceiling mounts without accessing conduit system
Mounting adapters for Champ VMV LEDs
2 EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
Part number:
CHMM4
Part number:
CHMM1
Part number:
CHMM3
Appleton MercMaster III mounting adapter
Thomas & Betts HazLux mounting adapter
GE H2 Filtr-Gard mounting adapter
Part number:
CHMM2
Appleton MercMaster II mounting adapter
3EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
Appleton MercMaster III mounting adapter
Applications:
• Mounting adapters allow the end-user to reliably retrofit Crouse-Hinds series Champ VMV/VMVL LED luminaires to Appleton® MercMaster III mounts.
Certifications and compliances with adapter:
NEC & CEC
• Class I, Division 2, Groups A, B, C, D
• Class II, Division 1, Groups E, F, G
• Class III
• Simultaneous Presence
• Wet Locations, Type 4X, IP66
UL standards
• UL 844 Hazardous (Classified)
• UL1598 Luminaires, UL1598A Marine
CSA standard
• CSA C22.2 No. 137
Standard materials:
• LED Luminaire and Adapter: copper-free aluminum with Corro-free™ epoxy powder coat
• Gaskets: silicone
• External hardware: stainless steel
The CHMM1 mounting adapter is compatible with the following Appleton mounts from the MercMaster III product lineup:
• Pendant – KPA-75 and KPA-100
• Flexible pendant – KPAF-75 and KPAF-100
• Cone pendent – KPCH-75 and KPCH-100
• Ceiling – KPC-75 and KPC-100
• Wall – KPWB-75 and KPWB-100
• 25° Stanchion – KPS-125 and KPS-150
• 90° Stanchion – KPST-125 and KPST-150
Note: CHMM1 mounting adapters are not to be used with Appleton mounts provided with fuses and fuse holders.
Features:
• Smart design saves hours of tear down and installation time
• Compact design allows for easy conversion to Crouse-Hinds series Champ VMV fixtures
• One adapter solution for any existing Appleton MercMaster III mounts in use today
• Easily convert wall and ceiling mounts without accessing conduit system
Appleton Mercmaster III top hat
Champ VMV/VMVL LED
CHMM1 top hat adapter
Dimensions:
CHMM1
CHMM3 CHMM4
CHMM2
2.85
1.7413.36
9.6112.26
3.10
11.60
2.07
8.1110.16
9.6211.97
2.501.37
13.43
2.23
15.79
10.241.30
9.57
7.06
CHMM1
CHMM3 CHMM4
CHMM2
2.85
1.7413.36
9.6112.26
3.10
11.60
2.07
8.1110.16
9.6211.97
2.501.37
13.43
2.23
15.79
10.241.30
9.57
7.06
Part number:
CHMM1
4 EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
Appleton MercMaster II mounting adapter
Applications:
• Mounting adapters allow the end-user to reliably retrofit Crouse-Hinds series Champ VMV/VMVL LED luminaires to Appleton® MercMaster II mounts.
Certifications and compliances with adapter:
NEC & CEC
• Class I, Division 2, Groups A, B, C, D
• Class II, Division 1, Groups E, F, G
• Class III
• Simultaneous Presence
• Wet Locations, Type 4X, IP66
UL standards
• UL 844 Hazardous (Classified)
• UL1598 Luminaires, UL1598A Marine
CSA standard
• CSA C22.2 No. 137
Standard materials:
• LED Luminaire and Adapter: copper-free aluminum with Corro-free™ epoxy powder coat
• Gaskets: silicone
• External hardware: stainless steel
The CHMM2 mounting adapter is compatible with the following Appleton mounts from the MercMaster II product lineup:
• Pendant – LPA-75 and LPA-100
• Ceiling – LPC-75 and LPC-100
• Wall – LPWB-75 and LPWB-100
• 25° Stanchion – LPS-125 and LPS150
Note: CHMM2 mounting adapters are not to be used with Appleton mounts provided with fuses and fuse holders.
Features:
• Smart design saves hours of tear down and installation time
• Compact design allows for easy conversion to Crouse-Hinds series Champ VMV fixtures
• One adapter solution for most existing Appleton MercMaster II mounts in use today
• Easily convert wall and ceiling mounts without accessing conduit system
Appleton Mercmaster II mount
Champ VMV/VMVL LED
CHMM2 mounting adapter
Dimensions:
CHMM1
CHMM3 CHMM4
CHMM2
2.85
1.7413.36
9.6112.26
3.10
11.60
2.07
8.1110.16
9.6211.97
2.501.37
13.43
2.23
15.79
10.241.30
9.57
7.06
CHMM1
CHMM3 CHMM4
CHMM2
2.85
1.7413.36
9.6112.26
3.10
11.60
2.07
8.1110.16
9.6211.97
2.501.37
13.43
2.23
15.79
10.241.30
9.57
7.06
Part number:
CHMM2
5EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
Applications:
• Mounting adapters allow the end-user to reliably retrofit Crouse-Hinds series Champ VMV/VMVL LED luminaires to Thomas & Betts HazLux® mounts.
Certifications and compliances with adapter:
NEC & CEC
• Class I, Division 2, Groups A, B, C, D
• Class II, Division1, Groups E, F, G
• Class III
• Simultaneous Presence
• Wet Locations, Type 4X, IP66
UL standards
• UL 844 Hazardous (Classified)
• UL1598 Luminaires, UL1598A Marine
CSA standard
• CSA C22.2 No. 137
Standard materials:
• LED Luminaire and Adapter: copper-free aluminum with Corro-free™ epoxy powder coat
• Gaskets: silicone
• External hardware: stainless steel
The CHMM3 mounting adapter is compatible with the following Thomas & Betts mounts from the HazLux product lineup:
• Pendant – VP2 and VP3
• Ceiling – VA2 and VA3
• Wall – VB2-VIB and VB3-VIB
• 25° Stanchion – VS5, VS4-VIB and VS5-VIB Not applicable for 21L and 25L Champ VMV variants
• Straight stanchion – VL4-VIB and VL5-VIB
Note: CHMM3 mounting adapters are not to be used with Thomas & Betts mounts provided with fuses and fuse holders.
Features:
• Smart design saves hours of tear down and installation time
• Compact design allows for easy conversion to Crouse-Hinds series Champ VMV fixtures
• One adapter solution for most existing Thomas & Betts HazLux mounts in use today
• Easily convert wall and ceiling mounts without accessing conduit system
Thomas & Betts mount
Champ VMV/VMVL LED
CHMM3 mounting adapter
Thomas & Betts HazLux mounting adapter
Dimensions:
CHMM1
CHMM3 CHMM4
CHMM2
2.85
1.7413.36
9.6112.26
3.10
11.60
2.07
8.1110.16
9.6211.97
2.501.37
13.43
2.23
15.79
10.241.30
9.57
7.06
Part number:
CHMM3
6 EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
GE H2 Filtr-Gard mounting adapter
Applications:
• Mounting adapters allow the end-user to reliably retrofit Crouse-Hinds series Champ VMV/VMVL LED luminaires to GE® H2 Filtr-Gard mounts.
Certifications and compliances with adapter:
NEC & CEC
• Class I, Division 2, Groups A, B, C, D
• Class II, Division 1, Groups E, F, G
• Class III
• Simultaneous Presence
• Wet Locations, Type 4X, IP66
UL standards
• UL 844 Hazardous (Classified)
• UL1598 Luminaires, UL1598A Marine
CSA standard
• CSA C22.2 No. 137
Standard materials:
• LED Luminaire and Adapter: copper-free aluminum with Corro-free™ epoxy powder coat
• Gaskets: silicone
• External hardware: stainless steel
The CHMM4 mounting adapter is compatible with the following GE mountsts from the H2 Filtr-Gard product lineup:
• Pendant – H2000-3P
• Straight Stanchion – H2000-6S
• Angle stanchion – H2000-5J (Not applicable for 21L and 25L Champ VMV variants)
Note: CHMM4 mounting adapters are not to be used with GE mounts provided with fuses and fuse holders.
Features:
• Smart design saves hours of tear down and installation time
• Compact design allows for easy conversion to Crouse-Hinds series Champ VMV fixtures
• One adapter solution for most existing GE H2 Filtr-Gard mounts in use today
• Easily convert wall and ceiling mounts without accessing conduit system
GE H2 Filtr-Gard mount
Champ VMV/VMVL LED
CHMM4 mounting adapter
Dimensions:
Part number:
CHMM4
7EATON'S CROUSE-HINDS Mounting adapters for Champ VMV & VMVL
For more information:
If further assistance is required, please contact an authorized Eaton Distributor, Sales Office, or Customer Service Department.
India91-124-4683888 FAX: [email protected]
Australia61-2-8787-2777 FAX: 61-2-9609-2342CEASales@ cooperindustries.com
Korea82-2-3484-6783 82-2-3484-6778CCHK-sales@ cooperindustries.com
China86-21-2899-3600 FAX: 86-21-2899-4055cchsales@ cooperindustries.com
Singapore65-6645-9888 FAX: 65-6297-4819chsi-sales@ cooperindustries.com
Eaton Middle East9714-8066100 FAX: [email protected]
Europe (Germany)49 (0) 6271 806-500 49 (0) 6271 806-476sales.CCH.de@ cooperindustries.com
Mexico/Latin America/Caribbean52-555-804-4000 FAX: [email protected]
CanadaToll Free: 800-265-0502 FAX: (800) 263-9504 FAX Orders only: (866) 653-0645
U.S. (global headquarters): Eaton's Crouse-Hinds business
1201 Wolf Street Syracuse, NY 13208
(866) 764-5454 FAX: (315) 477-5179 FAX Orders Only: (866) 653-0640
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
© 2020 EatonAll Rights ReservedPrinted in USAPublication No. 5458-1020October 2020