manual
MOUNTING – DISMOUNTING
ASSEMBLING – DISASSEMBLINGINSTRUCTION
TECHNICALINFORMATION
ET-W-SIET-WD-SI
2
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
DSI SERVICE – TEAM
Sales Department DSI Hamm
Sales Department DSI International
Jessica KampmannDSI Hamm D.A.CH, Asia, USA, AfricaPhone: +49 (0) 23 85 772 212E-Mail: [email protected]
Sandra LeszynskyWestern Europe and UK, USA, Australia, AsiaPhone: +49 (0) 23 85 772 214E-Mail: [email protected]
Katja SpankeWestern EuropePhone: +49 (0) 23 85 772 215E-Mail: [email protected]
Iryna MatyakEastern EuropePhone: +49 (0) 23 85 772 216E-Mail: [email protected]
Joost SamynSales Representative Western EuropeMolenbergstraat 151700 DilbeekBelgiumPhone: +32 24 52 70 55Mobil: +32 49 134 39 00E-Mail: [email protected]
Touch and Pour Systems LtdPhilip HoltRufford HouseDarwin DriveSherwood Energy VillageNew OllertonNottinghamshireNG22 9GWUnited KingdomPhone: +44 (0) 1623 836814Fax: +44 (0) 1623 239224E-Mail: [email protected]
Keg ServiceTadeusz GonciarczykSales Representative Eastern Europe UL. Walowa 351-523 WroclawPolandPhone: +48 71 34 66 632Mobil: +48 50 51 54 152E-Mail: [email protected]
OJAOlaf JakobSales Representative Germany, Austria, SwitzerlandWortmannsweg 1444149 DortmundGermanyPhone: +49 (0) 231 22 50 740Fax: +49 (0) 231 22 50 741E-Mail: [email protected]
3
SAFETY AND QUALITY
Health and safety
Incorrect assembly/installation may damage the keg spear and poses the risk that components may occasionally come off during initial pressurization and can cause harm to product and person.
Quality
Specialised sealing systems made of high-grade materials are in daily utilisation with all our types of extractor tubes. Due to continuous improvement of our tech-nology we are able to equip all S-type and D-type systems with a five-year warran-ty.
4
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
LIST OF CONTENTS
1. Mounting Instruction
2. Dismounting Instruction
3. Disassembling Instruction
4. Assembling Instruction
5. Tool List
6. Technical Information
7. Connections
5
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
1. Mounting Instruction
ET-W-SI ET-WD-SI
6
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
2. Check the keg neck is clean. Clean the keg neck from any contaminations.
1. Moisten the extractor tube with water.Fig. 01
Fig. 02
Fig. 033. Check the sealing ring is not damaged and is posi-
tioned correctly.
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
7
5. Push in the extracor tube by hand. The safety latch will recess and click back after it has passed the keg neck.
4. Check if lock/safety is O.K. Insert the extracor tube straight.
6. Tighten the extractor tube (rotate it clockwise) e.g. with the DSI screw-in/screw-out tool and torque-wrench. The mounting torque (continuous) must be 80 ±5 Nm.
Fig. 04
Fig. 05
Fig. 06
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
8
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
7. Remove the screw-in/screw-out tool. The keg is ready for use now.
Fig. 07
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
9
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
2. Dismounting Instruction
ET-W-SI ET-WD-SI
10
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
2. Unscrew the extractor tube (rotate it counter- clockwise) with the DSI screw-in/screw-out tool.
1. Decompress the keg, e.g. by means of the DSI decompression and removal tool.
3. Connect the removal tool like a normal dispense head and press down the handle till it clicks. The safety latch will recess.
Fig. 08
Fig. 09
Fig. 10
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
11
4. Take out the extractor tube and disconnect the removal tool.
Fig. 11
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
12
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
DISASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
3. Disassembling Instruction
ET-W-SI ET-WD-SI
13
1. Put the extractor tube in the tool. Make sure that the three pins of the tool fit into the three holes in the bottom of the extractor tube plate.
2. Pull the handle forward to compress the spring. Push the safety latch slightly inwards. Pull the body downwards and turn it anti-clockwise until it is unlocked.
3. Move the body upwards and connect it to the tool by turning the body 90°.
4. Push the handle backward. Take the subassy out. Take the body off.
5. Take off the remaining parts. The extractor tube is disassembled.
DISASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
14
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
ASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
4. Assembling Instruction
ET-W-SI ET-WD-SI
15
1. Replace the sealing ring on the body and the main seal. Assemble all parts.
2. Connect the body to the assembling tool. Put the subassy in the tool. Make sure that the three pins of the tool fit into the three holes in the bottom of the extractor tube plate. Push the safety latch slightly inwards.
3. Pull the handle forward to compress the spring.
4. Pull the body downwards and turn it clock-wise until it is locked to the extractor tube plate. Make sure that the safety latch sticks through the big opening in the body.
5. Push the handle backward in order to tension the spring and take out the extractor tube. Please check the correct positions of the seals and the safety latch.
ASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
16
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
TOOLS EXTRACTOR TUBE ET-W-SI / ET-WD-SI
5. Tool List
ET-W-SI ET-WD-SI
17
2. Screw-in/screw-out tool: part number: 025521.1
1. Removal tool for: ET-W-SI 2 lugs: part number 026578.2 ET-WD-SI 2 lugs: part number 027987.3
3. Assembling/disassembling tool for: ET-W-SI 2 lugs: part number 910545 ET-WD-SI 2 lugs: part number 910553
TOOLS EXTRACTOR TUBE ET-W-SI / ET-WD-SI
18
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
4. Disassembling tool CO2 gasket: ET-WD-SI: part number: 910610
TOOLS EXTRACTOR TUBE ET-W-SI / ET-WD-SI
19
TECHNICAL INFORMATION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
6. Technical Information
ET-W-SI ET-WD-SI
20
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
TECHNICAL INFORMATION EXTRACTOR TUBE ET-W-SI
Technical Data Sheet ET-W SI
AH08.02.2002
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
A lay-out modified 15.08.2002 AH
---ORIGIN REPL. BYREPL.
1
NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
NORM
APPR.
DRAWN
NAMEDATE TITLE
MATERIAL
WEIGHTSCALEROUGHNESSREMARKSPRODUCT
A4
FORMATPROJ. METHOD
SHTS.2
PROD. DEV. DE
D-1762
VOLUME
B updated 06.03.2013 Kunze
Bottom of Keg
Distance: Extractor in Closed PositionPosition when Cleaning and Filling
Extractor in Open Position
14mm
11mm
Beer Valve Part 3 - Part 2 B 4mm 6,5mm-8mm
In Part 2 Ø14,35 C 160mm²
Part 3 - Part 5 D 125mm²
In Part 5 Ø17,6 E 240mm²
Part 1 G 1660mm²
Short-time 135°CIV
II
III
I Stroke
CO₂ Valve
+Tube
Temperature Resistance
Passages through
Inner Tube
Passages through
Outer Tube
3mm max. 4mm-6mmParts 2+5 - Part 1 A
240mm²Part 1 - Part 2 F
9mm
O 14,35
F
D
G
E
A Stroke CO Valve2
B Stroke Beer Valve
Keg Neck
O 44,4 +0,3-0,2
O 45,7max.chamfered
6. CO Spring
2. CO Valve
1. Body 2"x14tpi
9. Sealing Ring
3. Beer Valve
4. Beer Spring
5. Tube
7. Safety Latch
8. Locking Plate
2
2
C
21
TECHNICAL INFORMATION EXTRACTOR TUBE ET-WD-SI
22.02.2013 kunze
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
- - - -
---ORIGIN REPL. BYREPL.
1
NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
NORM
APPR.
DRAWN
NAMEDATE TITLE
MATERIAL
WEIGHTSCALEROUGHNESSREMARKSPRODUCT
A4
FORMATPROJ. METHOD
SHTS.2
PROD. DEV. DE
Technical Data Sheet ET-WD SI
D-910432
VOLUME
6. CO Spring
2. CO Valve
A Stroke CO -Valve2 1. Body
2"x14tpi
9. Sealing Ring
3. Ball
4. Beer Spring
5. Tube
7. Safety Latch
8. Locking Plate
Bottom of Keg
Ball Part 3 - Part 2 B 4mm 6,5mm-8mmIn Part 2 Ø17,8 C 250mm²Part 3 - Part 5 D 220mm²In Part 5 Ø17,6 E 240mm²
Part 1 G 2340mm²
A 3mm max. 4mm-6mm
II
IIIPart 1 - Part 2 F
I StrokeCO₂ Valve + Tube
Parts 2+5 - Part 1
Passages through Inner Tube
Passages through Outer Tube
Temperature Resistance Short-time 160°C
330mm²
IV
C
B Stroke Ball
Extractor in Closed Position
Position when Cleaning and Filling
Extractor in Open Position
Distance: 9mm
11mm
14mm
Keg Neck
O 17,8F
G
O 44,4 ±0,2
E
D
2
2
22
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
CONNECTION EXTRACTOR TUBE ET-W-SI / ET-WD-SI
6. Connection
ET-W-SI ET-WD-SI
23
CONNECTION EXTRACTOR TUBE ET-W-SI
19.06.2002 AH
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
A depth+slope dimensions added 14.08.2002 AH
---ORIGIN REPL. BYREPL.
1
NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
NORM
APPR.
DRAWN
NAMEDATE TITLE
MATERIAL
WEIGHTSCALEROUGHNESSREMARKSPRODUCT
A4
FORMATPROJ. METHOD
SHTS.2
PROD. DEV. DE
Well-Type Connection System
D-184559
VOLUME
B dimension 7,1 added 23.08.2002 AH
C updated 06.03.2013 Kunze
BOTTOM VIEWDISPENSE HEAD
O 44,5 ±0,2
27,3 u1
Dispense Headaccording toDIN 32677 (K)
Extractor Tubeaccording to DIN 3542 (K-1)
10,7
±0,3
O 19,3 +0,13-0,12
O 38,85 ±0,1
O 45,35 ±0,3
O 14,35 ±0,12
24
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
CONNECTION EXTRACTOR TUBE ET-WD-SI
kunze25.02.2013
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
- - - -
---ORIGIN REPL. BYREPL.
1
NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
NORM
APPR.
DRAWN
NAMEDATE TITLE
MATERIAL
WEIGHTSCALEROUGHNESSREMARKSPRODUCT
A4
FORMATPROJ. METHOD
SHTS.2
PROD. DEV. DE
WD SI Connection System
D-910433
VOLUME
10,7
±0,3
BOTTOM VIEWDISPENSE HEAD
O 44,5 ±0,2
O 38,85 ±0,1
O 45,4 ±0,3
25
26
DSI
07.
2018
· ©
DSI
Get
ränk
earm
atur
en G
mb
H ·
All
righ
ts r
eser
ved
Germany
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Phone: +49 (0) 23 85 772 100 Fax: +49 (0) 23 85 772 249
[email protected] www.dispensegroup.com
United Kingdom
Touch and Pour Systems Ltd Rufford House Darwin Drive Sherwood Energy Village New Ollerton Nottinghamshire NG22 9GW
Phone: +44 (0) 1623 836814 Fax: +44 (0) 1623 239224
[email protected] www.tapsystems.co.uk
ITALY
Vin Service S.r.l. Via G.Falcone 26/34 24050 Zanica - Bergamo - Italy Phone: +39 (035) 672 361 Fax: +39 (035) 672 699
[email protected] www.vinservice.com
USA
Taprite 3248 Northwestern Drive San Antonio Texas 78238
Phone: +1 (210) 523 08 00 Fax: +1 (210) 520 30 35
[email protected] www.taprite.com