manual
MOUNTING – DISMOUNTING
ASSEMBLING – DISASSEMBLINGINSTRUCTION
TECHNICALINFORMATION
ET-C-SI
2
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
DSI SERVICE – TEAM
Sales Department DSI Hamm
Sales Department DSI International
Jessica KampmannDSI Hamm D.A.CH, Asia, USA, AfricaPhone: +49 (0) 23 85 772 212E-Mail: [email protected]
Sandra LeszynskyWestern Europe and UK, USA, Australia, AsiaPhone: +49 (0) 23 85 772 214E-Mail: [email protected]
Katja SpankeWestern EuropePhone: +49 (0) 23 85 772 215E-Mail: [email protected]
Iryna MatyakEastern EuropePhone: +49 (0) 23 85 772 216E-Mail: [email protected]
Joost SamynSales Representative Western EuropeMolenbergstraat 151700 DilbeekBelgiumPhone: +32 24 52 70 55Mobil: +32 49 134 39 00E-Mail: [email protected]
Touch and Pour Systems LtdPhilip HoltRufford HouseDarwin DriveSherwood Energy VillageNew OllertonNottinghamshireNG22 9GWUnited KingdomPhone: +44 (0) 1623 836814Fax: +44 (0) 1623 239224E-Mail: [email protected]
Keg ServiceTadeusz GonciarczykSales Representative Eastern Europe UL. Walowa 351-523 WroclawPolandPhone: +48 71 34 66 632Mobil: +48 50 51 54 152E-Mail: [email protected]
OJAOlaf JakobSales Representative Germany, Austria, SwitzerlandWortmannsweg 1444149 DortmundGermanyPhone: +49 (0) 231 22 50 740Fax: +49 (0) 231 22 50 741E-Mail: [email protected]
3
SAFETY AND QUALITY
Safety
Incorrect assembly/installation may damage the keg spear and poses the risk that components may occasionally come off during initial pressurization and can cause harm to product and person.
Quality
Specialised sealing systems made of high-grade materials are in daily utilisation with all our types of extractor tubes. Due to continuous improvement of our tech-nology we are able to equip all M-type-systems with a two-year warranty.
4
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
LIST OF CONTENTS
1. Mounting Instruction
2. Dismounting Instruction
3. Disassembling Instruction
4. Assembling Instruction
5. Tool List
6. Technical Information
7. Connections
5
ET-C-SI
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
1. Mounting Instruction
6
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
2. Check the keg neck is clean. Clean the keg neck from any contaminations.
1. Moisten the extractor tube with water.Fig. 01
Fig. 02
Fig. 033. Check the sealing ring is not damaged and is posi-
tioned correctly.
7
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
5. Push in the spear by hand. The safety latch will recess and click back after it has passed the keg neck.
4. Check if lock/safety is O.K. Insert the Extracor Tube straight.
6. Tighten the extractor tube (rotate it clockwise) e.g. with the DSI Screw-in/screw-out Tool and Torque-wrench. The mounting torque (continuous) must be 80 ±5 Nm.
Fig. 04
Fig. 05
Fig. 06
8
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
MOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
7. Remove the screw-in/screw-out tool. The keg is ready for use now.
Fig. 07
9
ET-C-SI
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
2. Dismounting Instruction
10
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
2. Unscrew the extractor tube (rotate it counter- clockwise) with the DSI Screw-in/screw-out Tool.
1. Decompress the keg, e.g. by means of the DSI Decompression and Removal Tool.
3. Connect the Removal Tool like a normal dispense head and press down the handle till it clicks. The safety latch will recess.
Fig. 08
Fig. 09
Fig. 10
11
DISMOUNTING INSTRUCTION EXTRACTOR TUBE ET-C-SI
4. Take out the spear and disconnect the Removal Tool.
Fig. 11
12
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
ET-C-SI
DISASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-C-SI
3. Disassembling Instruction
13
DISASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-C-SI
1. Put the Extractor Tube in the Tool. Make sure that the three pins of the tool fit into the three holes in the bottom of the Extractor Tube Plate.
2. Pull the handle forward to compress the spring. Push the safety latch slightly inwards. Pull the body downwards and turn it anti-clockwise until it is unlocked.
3. Move the body upwards and connect it to the tool by turning the body 90°.
4. Push the handle backward. Take the subassy out. Take the body off.
5. Take off the remaining parts. The extractor tube is disassembled.
14
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
ET-C-SI
ASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-C-SI
4. Assembling Instruction
15
ASSEMBLING INSTRUCTION EXTRACTOR TUBE ET-C-SI
1. Replace the sealing ring on the body and the main seal. Assemble all parts.
2. Connect the body to the Assembling Tool. Put the subassy in the Tool. Push the safety latch slightly inwards.
3. Pull the handle forward to compress the spring.
4. Pull the body downwards and turn it clock-wise until it is locked to the Extractor Tube Plate. Make sure that the safety latch sticks through the big opening in the body.
5. Push the handle backward in order to tension the spring and take out the extractor tube. Please check the correct positions of the seals and the safety latch.
16
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
ET-C-SI
TOOLS EXTRACTOR TUBE ET-C-SI
5. Tool List
17
2. Screw-in/screw-out tool: part number: 550426.8
1. Removal tool: part number: 550439.1
3. Disassembling tool CO2 gasket: part number: 910611
TOOLS EXTRACTOR TUBE ET-C-SI
18
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
4. Assembling/Disassembling tool: part number: 910554
TOOLS EXTRACTOR TUBE ET-C-SI
19
ET-C-SI
TECHNICAL INFORMATION EXTRACTOR TUBE ET-C-SI
6. Technical Information
20
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
TECHNICAL INFORMATION EXTRACTOR TUBE ET-C-SI
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
A 000023 was 00023; ... + 36,5 was ... + 36,6 26.07.2016 Lasko.
-- REPL. BYREPL.NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
DESIGN.
3D
NAMEDATE TITLE
MATERIAL
WEIGHTSCALE
ROUGHNESS
REMARKSPRODUCT
A2FORMATPROJ. METHOD
SHTS.
PROD. DEV. GERMANY
DIN ISO 2768-mH
Master Extractor Tube C SI 2"x14 tpi
000019
DIN EN ISO 1302
kunze31.01.2018
lasko28.01.2015
FILE NAME: 000019_Masterdrawing ET C SI_unbetätigt.asmDRAWING NAME: 000019_Masterdrawing ET C SI 2x14tpi.dft
2D kunze31.01.2018
LAST
CHA
NG.
ÄM
3550
1
1,2:1 (1:1,25)LASTCHANGE
1 x
ÄM 3024
EDGESDIN EN ISO 13715
VOLUME
1
B 611178 was 027046.8 02.11.2016 Kunze 3631
C 611020 was 611178 31.01.2018 Kunze 3945
etch on top 552557.5Auf Oberfläche ätzen mit 552557.5
Bottom of KegFassboden
1
9
7
3
4
2
6BodyGehäuse[Stainless Steel]
BallKugel[Stainless Steel]
Locking PlateBajonettscheibe[Stainless Steel]
Beer SpringBierfeder[Stainless Steel]
LatchSicherheitsklinke[Stainless Steel]
TubeSteigrohr[Stainless Steel]
Sealing RingGehäusedichtung[NBR]
Keg NeckFassmuffe
month and year of assemblyMonat und Jahr der Montage
5CO SpringCO -Feder[Stainless Steel]
8CO ValveCO -Dichtung[EPDM]
Pos. Quantity Art.-No. Title
1 1 000022 Master Down Tube C
2 1 026363.7 Sealing Ring
3 1 026367.0 Locking Plate
4 1 026703.6 Ball
5 1 553045.9 Spring
6 1 610150 Body C 2"x14tpi
7 1 610670 Valve Spring
8 1 611020 CO2 Valve
9 1 611070 Safety Latch, flat
O 15,2 ±0,2
O 31 ±0,1
2"x14tpi -0,005" [BS 84]
O 74,5 ±0,15
thread to be greased with W-00015Gewinde beschichtet mit W-00015
5,85
±0,1
F
O 44,4 +0,3-0,2
E
L.a.D.
... ±
1 (se
e Dr
awin
g-No
. 000
023)
L.a.D.
... ±
1 (si
ehe
Zeich
nung
s-No
. 000
023)
(L.ü.A
. = L
.a.D.
+ 36
,5)
18
9
G
D
C
Distance:Tube - Bottom of Keg
[mm]Abstand:
Rohr - Fassboden
closed position 15 geschlossene Position
while cleaning / filling 8 während Reinigung / Befüllen
open position 12 geöffnete Position
EN DE EN DE
Product Information Produktinformationen
Stroke and Passages
open Position
while Cleaning / Filling
Hub und Öffnungsquerschnitte offene Position
während Reinigung / Befüllen
according to DIN 6650, DIN 3542 and FDA regulations
Produkt nach DIN 6650, DIN 3542 und FDA Bestimmungen
I CO2 valve + tube part 8 + part 1 - part 6 A 3,5 mm max. 8,5 mm
CO2-Dichtung + Steigrohr Pos. 8 + Pos. 1 - Pos. 6 A 3,5 mm max. 8,5 mm
gastight gasdicht ball part 4 – part 8 B 6,5 mm Kugel Pos. 4 – Pos. 8 B 6,5 mm
for specific length calculation keg drawing or H3-dimension is needed according to DIN 6647
Für konkrete Längenberechnung wird die Keg-Zeichnung oder das H3-Maß nach DIN 6647 benötigt
II
inside the seal part 8 - part 4 C 160 mm²
innerhalb der Dichtung Pos. 8 - Pos. 4 C 160 mm²
mounting torque: 80±5 Nm Anzugsdrehmoment: 80±5 Nm inside the seal part 8 D 180 mm² innerhalb der Dichtung
Pos. 8 D 180 mm²
temperature resistance short-time 135°C Temperaturbeständigkeit kurzfristig 135°C through inner tube Ø17,6 part 1
E 240 mm² innerhalb des Steigrohres Ø17,6 Pos. 1
E 240 mm²
for more information www.dispensegroup.com
für mehr Informationen www.dispensegroup.com III
through outer tube part 6 - part 8 F 190 mm² 410 mm² außerhalb des Steigrohres
Pos. 6 - Pos. 8 F 190 mm² 410 mm²
in part 6 G 1250 mm² in Pos. 6 G 1250 mm²
weight calculation ± 5% / Gewichtsberechnung ± 5%
m g = (L. a. D. mm − 40) ∗ 0,315
mm + 410g
B
A
O 43,5
O 48
O 19
C
²²
²²
customer-specific informationkundenspezifische Angaben
Art.-Nr.Part No.
L.a.D. [mm]Länge ab Dichtkantelength to sealing
Länge über alleslength over all
L.ü.A. [mm]
21
CONNECTION EXTRACTOR TUBE ET-C-SI
6. Connection
ET-C-SI
22
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Telefon: +49 (0) 23 85 772 100 Telefax: +49 (0) 23 85 772 249 Mail: [email protected] Internet: www.aalberts.com/dt
CONNECTION EXTRACTOR TUBE ET-C-SI
14.06.2005 AH
This
draw
ing
is th
e pr
oper
ty o
f Di
spen
se S
yste
ms In
tern
atio
nal.
The
info
rmat
ion
is co
nfid
entia
l and
sho
uld
not
be c
opie
d fo
ran
y ot
her
purp
ose
with
out
the
prio
r wr
itten
per
miss
ion
of
DSI G
eträ
nkea
rmat
uren
Gmb
H.If
in d
oubt
, ple
ase
ask.
Samp
les
are
requ
ired
afte
r ea
ch r
evisi
on.
A updated 28.03.2013 Kunze
---ORIGIN REPL. BYREPL.
1
NAMEDATEALTERATIONS
SHEETDRAWING NUMBER
NORM
APPR.
DRAWN
NAMEDATE TITLE
MATERIAL
WEIGHTSCALEROUGHNESSREMARKSPRODUCT
A4
FORMATPROJ. METHOD
SHTS.2
PROD. DEV. DE
Combi Type Connection System
D-185574
VOLUME
Extractor Tube according to DIN 3542 (C-1)
BOTTOM VIEWDISPENSE HEAD
Dispense Headaccording to DIN 32677 (C) 6,5
±0,2
5,9 ±
0,6
O 75 +0,50
5,85
±0,1 O 31 ±0,1
O 74,5 ±0,15
O 15,2 ±0,2
23
24
DSI
07.
2018
· ©
DSI
Get
ränk
earm
atur
en G
mb
H ·
All
righ
ts r
eser
ved
Germany
DSI Getränkearmaturen GmbH Oberster Kamp 20 59069 Hamm
Phone: +49 (0) 23 85 772 100 Fax: +49 (0) 23 85 772 249
[email protected] www.dispensegroup.com
United Kingdom
Touch and Pour Systems Ltd Rufford House Darwin Drive Sherwood Energy Village New Ollerton Nottinghamshire NG22 9GW
Phone: +44 (0) 1623 836814 Fax: +44 (0) 1623 239224
[email protected] www.tapsystems.co.uk
ITALY
Vin Service S.r.l. Via G.Falcone 26/34 24050 Zanica - Bergamo - Italy Phone: +39 (035) 672 361 Fax: +39 (035) 672 699
[email protected] www.vinservice.com
USA
Taprite 3248 Northwestern Drive San Antonio Texas 78238
Phone: +1 (210) 523 08 00 Fax: +1 (210) 520 30 35
[email protected] www.taprite.com