Transcript
Page 1: Mohamed Hedayat Mohamed Mohamed

Mohamed Hedayat Mohamed Mohamed 6 SADEKAT EL-KETAB STREET, ALEXANDRIA, EGYPT

+966551459285 [email protected]

OBJECTIVE:

To obtain a suitable job in a company that meets my academic background, personal skills, utilizes my experience in my career and develops my abilities to become a Successful Assist for the company.

PERSONAL INFORMATION: Date of Birth: 30/9/1987. Marital status: Single. Military status: Exempted. Nationality: Egyptian. Egyptian Driving License: Valid. Saudi Driving License: Valid. EDUCATION: B.SC in Mechanical Engineering JULY.2010 Faculty of Engineering, Alexandria University Grade: pass Accumulative Total: 63.61% WORK EXPERIENCE: BINDAYEL FOR INDUSTRIES & CONTRACTING (RIYADH, KSA) OCTOBER 2014 (PRESENT)

DESCRIPTION: Senior Mechanical Plumbing, Firefighting & HVAC Technical Office Engineer PROJECT: Technical College for Tourism (Mecca). Technical College for Tourism (Jeddah). Technical College for Advanced Technology (Riyadh). Technical College for Dairy Technologies (Riyadh). Technical Institute for Water Technology (Jeddah). Housing for Technical Institute of Plastic Technology (Riyadh). CLIENT: Technical & Vocational Training Corporation (TVTC).

Page 2: Mohamed Hedayat Mohamed Mohamed

RESPONSIBILITIES:

1- To Calculate the Fans and Air Handling Units Static Head using Elite Software, Chilled Water Pumps and Cooling Tower Pumps Flow and Head and Chilled Water Network Sizing According to Carrier Handbook.

2- To verify the Firefighting Pumps Head & Flow Calculations According to NFPA (13 & 14) Standard, Using Elite Software.

3- To Verify the Domestic Water Pumps, Irrigation Pumps & Sewage Lifting Stations Head & Flow Calculations According to Uniform Plumbing Code , International Plumbing Code & ASPE Code.

4- To Verify the Central Water Heaters, Hot Water Circulations Pumps, Domestic Water System Sizing Calculations According to Ashrae, Uniform Plumbing Code , International Plumbing Code & ASPE Code.

5- To make and revise the HVAC Duct Works, Chilled Water Piping System Firefighting System, Compressed Air Piping System, Steam Piping System & Plumbing Shop Drawing.

6- To Follow up the Mechanical Procurement Process Starting from Sending the Price Inquiries to the Suppliers, Making the Technical and Financial Comparisons between the Different Manufacturers and Suppliers and to prepare and revise the Material Submittals to ensure that it conform with The Project`s Specifications and to follow up the approvals with the Consultant and Client.

ORASCOM CONSTRUCTUION INDUSTRIES (CAIRO, EGYPT) JUNE 2014

PROJECT: Mall of Egypt. CLIENT: Majid Al Futtaim Properties Egypt. MEP CONSULTANT: Shaker Consultancy Group. MAIN CONTRACTOR: Besix Orascom joint venture. DESCRIPTION: Mechanical (HVAC, Firefighting & Plumbing) Site Engineer perform a technical, organizational and supervisory role on the Project, in charge of the installation of Firefighting Sprinkler network for Mall Service Corridors, Mall City Corridors, Food Court and Tenant Units Firefighting Connections, Chilled Water System Complete with Fan Coil Units Hookups and Tenant Units Connections Hookup, Water Supply Polypropylene PPR Water Supply System and

Page 3: Mohamed Hedayat Mohamed Mohamed

Drainage UPVC Piping System for Mall`s Toilets, Tenant Units Drainage Connections and HDPE Drainage System for the Mall`s Restaurants.

WATANIA FOR TRADING&CONTRACTING (CAIRO, EGYPT). MARCH 2014 1-PROJECT: Chipsy Plant Phase 3 at AL-Obour City, Egypt. CLIENT: Chipsy Food Industries. CONSULTANT: Egyptian Engineering Consultant Co (INFRA Group). DESCRIPTION: Mechanical (HVAC, Firefighting & Plumbing) Senior Site Engineer in charge of the installation of New Admin Building HVAC System Complete with Duct Work`s, Fan Coil Units complete with Chilled Water Hookups and Stand Alone Control System, Free Stand Air Condition, Firefighting System and Plumbing System, Compressed air System Complete with (Rotary Screw, Oil Free, Air Cooled Air Compressor), air receiver, Air dryer and Compressed air Pipe Line. Vegetable Oil System complete with Vegetable Oil Pumps, Heat Traced Vegetable Oil Pipe Line, Heat Traced Waste Oil Pipe Line. The Installation of New Central Hot Water Generator Unit, Hot Water Pipe line, Hot Water Mixers and Cleaning in Place (CIP) System. NOV 2012 2-PROJECT: Chipsy Plant Phase 2 at AL-Obour City, Egypt. CLIENT: Chipsy Food Industries. CONSULTANT: Mechanical Electrical Design (MED). DESCRIPTION: Mechanical (HVAC, Firefighting & Plumbing) Site Engineer, in charge of the installation of 360 TR Absorption Chiller complete with all accessories, Valves and Chilled Water Piping System ,the installation of firefighting Sprinkler system complete with piping network and fire fighting pump set (Jockey Pump, Diesel Pump and Electrical Pump).The installation of Warehouse Building Basement Drainage Submersible Pumps System. The installation of Admin Building HVAC System Complete with Duct Work`s, Fan Coil Units complete with Chilled Water Hookups and Stand Alone Control System, Free Stand Air Condition and Split Unit Air Condition, Design of Admin Lockers Room Ventilation System. Compressed air System Complete with (Rotary Screw, Oil Free, Air Cooled Air Compressor), air receiver, Air dryer and Compressed air Pipe Line. Vegetable Oil System complete with Vegetable Oil Pumps, Heat Traced Vegetable Oil Pipe Line, Heat Traced Waste Oil Pipe Line. The Installation of

Page 4: Mohamed Hedayat Mohamed Mohamed

Central Hot Water Generator, Hot Water Pipe line, Hot Water Mixers and Cleaning in Place (CIP) System.

TECHNO COLD&AUTO COLD FOR MEP SERVICES, DOHA, QATAR. APRIL 2012

1- PROJECT: SHK. Thani Bin Abduallah Al Thani3 Palaces At Al Gharafa. CLIENT: SHK. Thani Bin ABDULLAH Al Thani. CONSULTANT: DRA Engineering Consultants. DESCRIPTION: Mechanical (Firefighting & Plumbing) Site Engineer, Technical Office Engineer in charge of The Installation of The Water Supply System Polypropylene (PPR) Piping Network , Drainage system of 3 palaces. The Installation of External Underground water supply Network, drainage system, Concrete Domestic Water Tank, Septic Tank Buddle Flange. The Installation of Main Domestic Water Booster Pumps & Basement Submersible Pumps System. SEP 2010 2- PROJECT: Mazaya Residential Compound 72 villa & Club House. CLIENT: Mazaya Qatar Real Estate Development. CONSULTANT: MZ & Partners Qatar. DESCRIPTION: Mechanical (Firefighting & Plumbing) Site Engineer, in charge of the installation of villas & club house Plumbing System, Drainage System and Fire-fighting sprinkler system including the installation of Zone Control Valve Sets, Alarm Check Valve Set, Fire-fighting Pump Set ( Jockey Pump, Diesel Pump and Electrical Pump). Main Domestic Water, Firefighting High Density Polyethylene (HDPE) Under Ground Piping Network, Drainage Clay pipe Under Ground Piping System. Main domestic water, Fire Fighting Water, Grey Water and Black Water Concrete Tanks Buddle Flange and Main Underground Pump Room Installations. Grey water Treatment Station & Basement Submersible Pumps System Installation and to follow up the technical problems during the 400 Days Maintenance Period. -Technical Office Engineer, in charge of the preparation of Shop Drawings, As Built Drawings, following up the material submittals with the consultant resident engineer. The preparation of monthly invoice, Project Materials Take Off and Progress Daily Report.

Page 5: Mohamed Hedayat Mohamed Mohamed

TRAINING EXPERIENCE: Egyptian Navigation Company. JULY.2009

Dealing with Diesel engines, Diesel generators , refrigeration and air conditioning systems.

Dem Line Egypt. JULY.2008 Dealing with Diesel engines, Diesel generators, Hard work duringyearly Maintenance, Dealing with working environment.

Hyundai Service Center. JUNE.2007 Summer training, dealing with Motronic Injection systems.

GASCO. Summer Training.

Egyptian Petrochemical Company. JULY.2007 Identify the Power Station Components.

Egyptian Petrochemical Company. JULY.2006 GRADUATION PROJECT: “Design of an automated parking system” Complete design of an elevator parking system contains an elevator system, horizontal motion and turn table system. Supervised by:Prof. Dr. Wael A. crosby Grade: Excellent. CERTIFICATIONS& COURSES:

HVAC Systems Design Course using HAP Software at Engineering House Center (30 Hours), July 2014

Fire-prevention and Fire-fighting at Arab Academy for Science, Technology & maritime transport, Maritime Safety Institute, October 2010.

Personal safety and social responsibilities at Arab Academy for Science, Technology & maritime transport, Maritime Safety Institute, October 2010.

Marine emergency first aid kit at Arab Academy for Science, Technology & maritime transport, Maritime Safety Institute, October 2010.

Techniques of safety of life at Arab Academy for Science, Technology & maritime transport, Maritime Safety Institute, October 2010.

International Computer Driving License (ICDL) at Axon Center, July 2009.

Page 6: Mohamed Hedayat Mohamed Mohamed

COMPUTER SKILLS: MS-Office Package: Excellent Knowledge of (Word, Excel, Power Point,

Outlook, MS Project). Internet: Excellent Knowledge of Internet Application Searching and

Browsing. AutoCAD (2D&3D). Hourly Analysis Program (HAP) HVAC Duct Sizer Software Generally a quick learner to any computer skills.

OTHER QUALIFICATIONS: Self-motivated, Team working, Organizing and Planning, communication

skills. Persuading, work under pressure and Time management skills.

LANGUAGES: Arabic: Mother Tongue. English: Very Good.


Recommended