Datasheet
DESCRIPTIONHoneywell MICRO SWITCH TL Series toggle switches are military qualified to MIL-DTL-3950, specifications for sealed toggle switches. Quality construction features include a bonded seal between the toggle lever and bushing, and between the cover and case.
The robust design of the TL Series toggle is well-suited for many military, aerospace and other demanding applications where reliability is essential. These applications include environments where the panels are subjected to mechanical shock, vibration, and temperature extremes as well as environments with dust, splashing or hose-directed water.
TL Series toggle switches offer a variety of circuitry and pole options to easily integrate into a number of applications. A long history in military and aerospace applications has shown the TL Series toggle switches provide reliable performance with long operating life under the toughest conditions.
VALUE TO CUSTOMERS• MIL-DTL-3950 qualified switches available to meet military
specifications• Environmental sealing enables switches to withstand many
demanding indoor and outdoor applications• 1-, 2-, and 4-pole options for a variety of circuitry
requirements • 2- and 3-position, maintained and momentary toggle action
to meet circuit and actuator requirements • UL recognized, CSA certified, and CE approved for global
use
Sensing and Internet of Things
MICRO SWITCH Military-Grade Toggle SwitchesTL Series
005430Issue 4
FEATURES• MIL-DTL-3950 qualified• 1-, 2-, and 4-pole options• 2- and 3-position, maintained and momentary• Wide temperature range: -65 °C to 71 °C [-85 °F to 160 °F]• UL recognized, CSA certified, and CE approved• Optional leverlocks• Three termination options: screw, solder lugs, IWTS
(Integrated Wire Termination System)• Silver alloy or gold-plated contact options• Engineered step-design case provides added space between
terminals to prevent electrical shorting
POTENTIAL APPLICATIONS• Miliitary and commercial aircraft: fixed wing aircraft and
helicopter flight decks• Aviation ground support equipment: pumps, lights, and lift
platforms• Military land vehicles (track and wheeled vehicles): lights,
pumps, arming equipment, and lifts/ramps, etc.• Construction equipment: road milling, road pavers,
trenchers, and stump cutters
DIFFERENTIATION• Robust construction: Built from military-grade components
to achieve MIL-DTL-3950 requirements• Locking levers reduce unintended actuation
PORTFOLIOHoneywell offers an extensive line of MICRO SWITCH toggleswitches, including the following Series: MT, NT, TW, TS, AT,and ET.
2 sensing.honeywell.com
MICRO SWITCH Military-Grade Toggle Switches, TL Series
Table 1. Specifications
Characteristic Parameter
Description military-grade toggle switch
Sealing qualified to MIL-DTL-3950
Operating temperature -65 °C to 71 °C [-85 °F to 160 °F]
Actuators standard, locking, special design, tab
Action 2- or 3- position; momentary and maintained
Mounting Bushing 15/32 in (0.47 in) Ø
Circuitry SPST, SPDT, DPST, DPDT, 4PST, 4PDT
Terminations IWTS, solder, screw, quick-connect, leadwire
Contacts Silver alloy or gold-plated
Amp rating Up to 20 A, ac and dc capability
Approvals UL, CSA, CE
Measurement 26,7 mm H x 33,5 mm W x 22,6 mm D [1.05 in H x 1.32 in W x 0.89 in D]
Table 2. UL and CSA Electrical Ratings
Rating Code Electrical Rating
L192 10 amps, 125, 250, 277 Vac; ¼ Hp, 125 Vac; ½ Hp, 250, 277 Vac; 3 amps, 125 Vac “L”
L191 15 amps, 125, 250, 277 Vac; ½ Hp, 125 Vac; 1 Hp, 250, 277 Vac; 5 amps, 125 Vac “L”
Table 3. Electrical Ratings (in amperes)
Electrical rating code 28 Vdc 115 Vdc 250 Vdc 115 Vac, 60 Hz & 400 HzMax. 230 Vac
Ind. Res. Lamp Res. Res. Ind. Res. Lamp Res.
1 15 20 5 0.75 0.5 10 15 3 6
2 10 15 4 0.75 0.5 7 15 2 6
3 15 20 7 0.75 0.5 15 15 4 6
4 10 18 5 0.75 0.5 8 11 2 6
5 12 20 5 0.75 0.5 15 15 4 6
6 10 18 4 0.75 0.5 8 11 2 6
Sensing and Internet of Things 3
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TERMINAL CIRCUIT IDENTIFICATIONTerminal identifications are referred to in the order guides to indicate which circuits are made in each toggle position (i.e., 1-2 refers to circuit closure through terminals 1 and 2).
One Pole
Two Pole
Four Pole
TERMINALSIn addition to the screw terminal listings in the order guides, IWTS (Integrated Wire Termination Systems) versions and solder turrent terminals are available.
IWTS provides a reliable, completely serviceable unit which meets MIL-DTL-3950 requirements. IWTS improves maintain-ability since wiring bundles need not be disturbed. Leads are quickly and easily assembled or removed with an insert-extract tool.
A unique three-rib (grommet style) elastomer seal protects the lead connections without potting. There are no exposed metal terminals.
Versions available that will accept No. 16 wire with M39029/1-102 contact pins or No. 20 wire with MS39029/1-101 contact pins. Connections are resistant to shock, vibration, and high pull-out force.
SPECIAL CIRCUITRIESCatalog listings with -10, -50, and -70 suffix numbers, as shown in the order guides, have special “on-on-on” circuits, as illustrated below. TLs with -12 suffix are the same as -50 except the keyway position is maintained. The -72 is the same as -50 except that the opposite keyway position is momentary.
-10 CIRCUITRYNo of poles
Keyway Side Maint. Position
Center Maint. Position
Opposite Keyway Maint.
Position
2
4
-50 CIRCUITRYNo of poles
Keyway Side Momentary
Position
Center Maint. Position
Opposite Keyway Maint.
Position
2
4
-70 CIRCUITRYNo of poles
Keyway Side Momentary
Position
Center Maint. Position
Opposite Key-way Momen-tary Position
2
4
4 sensing.honeywell.com
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL (SCREW TERMINAL) 2-POSITION ORDER GUIDECircuits Made with Toggle At: Standard Toggle Pull-to-Unlock Toggle
No. of poles
Keyway Position Opposite KeywayElect.
Rating Code
UL Rating Code
Catalog Listing
Military Number
Add Suffix to Standard
Toggle Listing D
Military Number**
1 OFF 2-3 1 L191 1TL1-2 MS24523-22 D, F, G MS24658-22
OFF* 2-3 2 L192 1TL1-4 MS24523-29 F MS24658-29
1-2* OFF 2 L192 1TL1-6 MS24523-30 F MS24658-30
1-2 2-3 1 L191 1TL1-3 MS24523-23 D, F, G MS24658-23
1-2* 2-3 2 L192 1TL1-8 MS24523-26 F MS24658-26
2 OFF 2-3, 5-6 3 L191 2TL1-2 MS24524-22 D, F, G MS24659-22
OFF* 2-3, 5-6 4 L192 2TL1-4 MS24524-29 F MS24659-29
1-2, 4-5* OFF 4 L192 2TL1-6 MS24524-30 F MS24659-30
1-2, 4-5 2-3, 5-6 3 L191 2TL1-3 MS24524-23 D, F, G MS24659-23
1-2, 4-5* 2-3, 5-6 4 L192 2TL1-8 MS24524-26 F MS24659-26
4 OFF 2-3, 5-6, 8-9, 11-12
5 L191 4TL1-2 MS24525-22 D, F, G MS24660-22
OFF* 2-3, 5-6, 8-9, 11-12
6 L192 4TL1-4 MS24525-29 F MS24660-29
1-2, 4-5, 7-8, 10-11*
OFF 6 L192 4TL1-6 MS24525-30 F MS24660-30
1-2, 4-5, 7-8, 10-11
2-3, 5-6, 8-9, 11-12
5 L191 4TL1-3 MS24525-23 D, F, G MS24660-23
1-2, 4-5*, 7-8, 10-11
2-3, 5-6, 8-9, 11-12
6 L192 4TL1-8 MS24525-26 F MS24660-26
* These positions are momentary. All others are maintained.** Also add the appropriate suffix to the military number.D See page 10 for locking configurations.
PULL-TO-UNLOCK OPTIONWhen ordering pull-to-unlock toggle listings (see page 12 for configurations), add the suffix letter shown in the chart on page XXX to the standard toggle listing or the MS part number. For example, to order a 1TL1-1 pull-to-unlock toggle switch with the lever locked in the center position, add the letter E (i.e., 1TL1-1E, MS24658-21E)
SOLDER TURRET TERMINAL VERSION11TL, 12TL, and 14TL type switches with solder turrent terminals are qualified to MIL-DTL-3950. They have the same circuitry and electri-cal ratings as their 1TL, 2TL, and 4TL counterparts, For example, an 11TL1-2 is the same as a 1TL1-2, except it has solder turret terminals instead of screw terminals.
Circuitry Type Standard Lever Lever Lock
One pole 11TL MS27734 MS27737
Two pole 12TL MS27735 MS27738
Four pole 14TL MS27736 MS27739
Sensing and Internet of Things 5
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL (SCREW TERMINAL) 3-POSITION ORDER GUIDECircuits Made with Toggle At: Standard Toggle Pull-to-Unlock Toggle
No. of
polesKeyway Position
Center Position
Opposite Keyway
Ele
ct. R
atin
g C
ode
UL/
CSA
R
atin
g C
ode
Catalog Listing
Military Number
Add Suffix to Standard
Toggle Listing D
Military Number***
1 1-2 OFF 2-3 1 L191 1TL1-1 MS24523-21 ALL TYPES MS24658-21
1-2* OFF 2-3 2 L192 1TL1-5 MS24523-31 E, F, K, L, M, N MS24658-31
1-2* OFF 2-3* 2 L192 1TL1-7 MS24523-27 E, L, N MS24658-27
NONE** OFF 2-3 1 L191 1TL1-21 MS24523-24 E, F, K, M MS24658-24
NONE** 1-2 2-3 1 L192 1TL1-31 MS24523-33 E, F, K, M MS24658-33
NONE** 1-2 2-3* 2 L192 1TL1-51 MS24523-32 E MS24658-32
1-2* OFF NONE** 2 L192 1TL1-61 MS24523-28 E MS24658-28
2 1-2, 4-5 OFF 2-3, 5-6 3 L191 2TL1-1 MS24524-21 ALL TYPES MS24659-21
1-2, 4-5* OFF 2-3, 5-6 4 L192 2TL1-5 MS24524-31 E, F, K, L, M, N MS24659-31
1-2, 4-5* OFF 2-3, 5-6* 4 L192 2TL1-7 MS24524-27 E, L, N MS24659-27
NONE** OFF 2-3, 5-6 3 L191 2TL1-21 MS24524-24 E, F, K, M MS24659-24
NONE** 1-2, 4-5 2-3, 5-6 3 L191 2TL1-31 MS24524-33 E, F, K, M MS24659-33
NONE** 1-2, 4-5 2-3, 5-6* 4 L192 2TL1-51 MS24524-32 E MS24659-32
1-2, 4-5* OFF NONE** 4 L192 2TL1-61 MS24524-28 E MS24659-28
1-2, 4-5 1-2, 5-6 2-3, 5-6 3 L191 2TL1-10 MS27407-4 ALL TYPES MS27408-4
1-2, 4-5* 1-2, 5-6 2-3, 5-6 4 L192 2TL1-50 MS27407-5 E, F, K, L, M, N MS27408-5
1-2, 4-5* 1-2, 5-6 2-3, 5-6* 4 L192 2TL1-70 MS27407-6 E, L, N MS27408-6
4 1-2, 4-5, 7-8, 10-11 OFF 2-3, 5-6, 8-9, 11-12 5 L191 4TL1-1 MS24525-21 ALL TYPES MS24660-21
1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12 6 L192 4TL1-5 MS24525-31 E, F, K, L, M, N MS24660-31
1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12* 6 L192 4TL1-7 MS24525-27 E, L, N MS24660-27
NONE** OFF 2-3, 5-6, 8-9, 11-12 5 L191 4TL1-21 MS24525-24 E, F, K, M MS24660-24
NONE** 1-2, 4-5,
7-8, 10-11
2-3, 5-6, 8-9, 11-12 5 L191 4TL1-31 MS24525-33 E, F, K, M MS24660-33
NONE** 1-2, 4-5,
7-8, 10-11
2-3, 5-6, 8-9, 11-12* 6 L192 4TL1-51 MS24525-32 E MS24660-32
1-2, 4-5, 7-8, 10-11* OFF NONE** 6 L192 4TL1-61 MS24525-38 E MS24660-28
1-2, 4-5, 7-8, 10-11 2-3, 4-5 2-3, 5-6, 8-9, 11-12 5 L191 4TL1-10 – ALL TYPES –
1-2, 4-5, 7-8, 10-11* 2-3, 4-5, 7-8,
11-12
2-3, 5-6, 8-9, 11-12 6 L192 4TL1-50 MS27406-2 E, F, K, L, M, N MS27409-2
1-2, 4-5, 7-8, 10-11* 2-3, 4-5 2-3, 5-6, 8-9, 11-12* 6 L192 4TL1-70 – E, L, N –
1-2, 4-5, 7-8, 10-11 2-3, 4-5, 7-8,
11-12
2-3, 5-6, 8-9, 11-12 5 L191 4TL1-12 MS27406-1 ALL TYPES MS27409-1
1-2, 4-5, 7-8, 10-11* 2-3, 4-5, 7-8,
11-12
2-3, 5-6, 8-9, 11-12* 6 L192 4TL1-72 MS27406-3 E, L, N MS27409-3
* These positions are momentary. All others are maintained.** Toggle lever is blocked from these products. Toggle becomes 2-position, with center being one extreme position.*** Also add appropriate suffix letter to military numberD See page 10 for locking configurations.
6 sensing.honeywell.com
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL (IWTS TERMINATION) 2-POSITION ORDER GUIDECircuits Made with Toggle At: No. 16 Termination No. 20 Termination
No. of poles
Keyway Position Opposite KeywayElect.
Rating Code
UL Rating Code
Catalog Listing
Military Number
Catalog Listing
Military Number
1 OFF 2-3 1 L191 101TL1-2 MS27722-22 101TL2-2 MS27784-22
OFF* 2-3 2 L192 101TL1-4 MS27722-29 101TL2-4 MS27784-29
1-2* OFF 2 L192 101TL1-6 MS27722-30 101TL2-6 MS27784-30
1-2 2-3 1 L191 101TL1-3 MS27722-23 101TL2-3 MS27784-23
1-2* 2-3 2 L192 101TL1-8 MS27722-26 101TL2-8 MS27784-26
2 OFF 2-3, 5-6 3 L191 102TL1-2 MS27723-22 102TL2-2 MS27785-22
OFF* 2-3, 5-6 4 L192 102TL1-4 MS27723-29 102TL2-4 MS27785-29
1-2, 4-5* OFF 4 L192 102TL1-6 MS27723-30 102TL2-6 MS27785-30
1-2, 4-5 2-3, 5-6 3 L191 102TL1-3 MS27723-23 102TL2-3 MS27785-23
1-2, 4-5* 2-3, 5-6 4 L192 102TL1-8 MS27723-26 102TL2-8 MS27785-26
4 OFF 2-3, 5-6, 8-9, 11-12 5 L191 104TL1-2 MS27724-22 104TL2-2 MS27786-22
OFF* 2-3, 5-6, 8-9, 11-12 6 L192 104TL1-4 MS27724-29 104TL2-4 MS27786-29
1-2, 4-5, 7-8, 10-11* OFF 6 L192 104TL1-6 MS27724-30 104TL2-6 MS27786-30
1-2, 4-5, 7-8, 10-11 2-3, 5-6, 8-9, 11-12 5 L191 104TL1-3 MS27724-23 104TL2-3 MS27786-23
1-2, 4-5, 7-8, 10-11* 2-3, 5-6, 8-9, 11-12 6 L192 104TL1-8 MS27724-26 104TL2-8 MS27786-26
TL (IWTS TERMINATION) 3-POSITION ORDER GUIDECircuits Made with Toggle At: No. 16 Termination No. 20 Termination
No. of
polesKeyway Position
Center Position
Opposite Keyway
Ele
ct.
Rat
ing
Cod
e
UL/
CSA
R
atin
g C
ode
Catalog Listing
Military Number
Catalog Listing
Military Number
1 1-2 OFF 2-3 1 L191 101TL1-1 MS27722-21 101TL2-1 MS27784-21
1-2* OFF 2-3 2 L192 101TL1-5 MS27722-31 101TL2-5 MS27784-31
1-2* OFF 2-3* 2 L192 101TL1-7 MS27722-27 101TL2-7 MS27784-27
2 1-2, 4-5 OFF 2-3, 5-6 3 L191 102TL1-1 MS27723-21 102TL2-1 MS27785-21
1-2, 4-5* OFF 2-3, 5-6 4 L192 102TL1-5 MS27723-31 102TL2-5 MS27785-31
1-2, 4-5* OFF 2-3, 5-6* 4 L192 102TL1-7 MS27723-6 102TL2-7 MS27785-27
4 1-2, 4-5, 7-8, 10-11 OFF 2-3, 5-6, 8-9, 11-12 5 L191 104TL1-1 MS27724-21 104TL2-1 MS27786-21
1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12 6 L192 104TL1-5 MS27724-31 104TL2-5 MS27786-31
1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12* 6 L192 104TL1-7 MS27724-27 104TL2-7 MS27786-27
* These positions are momentary. All others are maintained.
NOTE: For TL switches featuring IWTS termination and a “pull-to-unlock” lever option, contact a Honeywell Sensing and Control representative at 1-800-537-6945.
Sensing and Internet of Things 7
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL SERIES 1-POLE STANDARD ACTUATOR OPTIONS, TERMINALS, & DIMENSIONSNote: Three-position switches shown
1TL1: Single pole, standard lever, screw terminals
11TL1: Single pole, standard lever, solder terminals
101TL1: Single pole, standard lever, IWTS terminals
10,9 mm[0.43 in]
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
31° ±7° total travel
15° 30’ ±3° 30’
Ø 6,09 mm [Ø 0.24 in]
15/32 - 32 UNS 2A threadto within 1,52 mm [0.060 in] of shoulder
Sealed to prevent entrance of liquids or dust
17,0 mm [0.67 in]
11,9 mm[0.47 in] 6,1 mm [0.24 in]
29,5 mm[1.16 in]
23,1 mm[0.91 in]
3X 6-32 UNC-2A X (0.260)binding head terminalscrew and lockwasher (sems)
28,4 mm[1.12 in]
4,8 mm[0.19 in]
15,7 mm [0.62 in]
19,05 mm[0.75 in]
9,7 mm[0.38 in]
10,9 mm[0.43 in]
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
31° ±7° total travel
15° 30’ ±3° 30’
Ø 6,09 mm [Ø 0.24 in]
15/32 - 32 UNS 2A thread to within 1,52 mm [0.060 in] of shoulder
Sealed to prevent entrance ofliquids or dust
17,0 mm [0.67 in]
11,9 mm[0.47 in] 6,1 mm [0.24 in]
29,5 mm[1.16 in]
23,1 mm[0.91 in]
4,7 mm ± 0,38 mm [0.185 in ±0.015 in] (3)
28,4 mm[1.12 in]
4,8 mm[0.19 in]
15,7 mm [0.62 in]
19,05 mm[0.75 in]
9,7 mm[0.38 in]
4,57 mm dia [0.18 in dia] (3)
6,4 mm [0.25 in]
2,29 mm dia [0.09 in dia] (3)
10,9 mm[0.43 in]
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
31° ±7° total travel
15° 30’ ±3° 30’
Ø 6,09 mm [Ø 0.24 in]
15/32 - 32 UNS-2 thread to within 1,52 mm[0.060 in] of shoulder
Sealed to prevent entrance ofliquids or dust
17,0 mm [0.67 in]
11,9 mm[0.47 in] 6,1 mm [0.24 in]
36,07 mm[1.42 in]
28,4 mm[1.12 in]
15,7 mm [0.62 in]
9,7 mm[0.38 in]
28,7 mm ±0,76 mm [1.130 ±0.030 in]
Sealed construction(blue seal)
9,7 mm[0.38 in]
Locking lever dimensions for single pole TL toggles
26,67 mm[1.05 in]
Ø 10,67 mm[Ø 0.42 in]
31° ±7°total travel
15° ±3°
2,28 mm [0.090 in]approx. pullout to change position
8 sensing.honeywell.com
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL SERIES 2-POLE STANDARD ACTUATOR OPTIONS, TERMINALS, & DIMENSIONSNote: Three-position switches shown
2TL1: Single pole, standard lever, screw terminals
12TL1: Single pole, standard lever, solder terminals
102TL1: Single pole, standard lever, IWTS terminals
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
10,9 mm[0.43 in]
34° ±8° total travel
Ø 6,09 mm [Ø 0.24 in]
17° ±4°
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS 2A thread to within 1,52 mm [0.060 in]of shoulder
17,0 mm [0.67 in]
11,9 mm[0.47 in] 6,1 mm [0.24 in]
34,29 mm[1.35 in]
3,3 mm min.[0.130 in min.]
27,94 mm[1.10 in]
3,3 mm min.[0.130 in min.]
6,6 mm[0.26 in]
22,6 mm[0.89 in]
9,7 mm[0.38 in]
33,53 mm[1.32 in]
19,05 mm[0.75 in]9,7 mm
[0.38 in]
7,1 mm[0.28 in]
6X 6-32 UNC-2A x (0.260)binding head terminalscrew and lockwsher(sems)
3 2
1
6
5
4
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
Ø 6,09 mm [Ø 0.24 in]
10,9 mm[0.43 in]
34° ±8° total travel
6,09 mm [0.24 in]
17° ±4°
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS-2thread to within 1,52 mm [0.060 in]of shoulder
17,0 mm [0.67 in]3,05 mm[0.12 in]
11,9 mm [0.47 in]
34,29 mm[1.35 in]
3,3 mm min.[0.130 in min.]
27,94 mm[1.10 in]
3,3 mm min.[0.130 in min.]
0,76 mm [0.03 in] (6)
4,57 mm dia [0.18 in dia] (6)
2,29 mm dia [0.09 in dia] (6)4,83 mm dia [0.19 in dia] (6)
34,0 mm max.[1.34 in max.]
23,1 mm max.[0.91 in max]
19,05 mm[0.75 in]
9,7 mm[0.38 in]
9,7 mm[0.38 in]
7,1 mm[0.28 in]
6,6 mm [0.26 in]
3 2 1
6 5 4
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
34° ±8° total travel
6,09 mm [0.24 in]
17° ±4°
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS-2thread to within 1,52 mm [0.060 in]of shoulder
17,0 mm [0.67 in]3,05 mm[0.12 in]
37,34 mm max[1.47 in max.]
11,9 mm [0.47 in]
Terminals accept PIN M39029/1-102
22,6 mm [0.89 in]
33,53 mm [1.320 in]
Sealed construction(blue seal)
9,7 mm[0.38 in]
9,7 mm[0.38 in]
9,7 mm[0.38 in]
Ø 6,09 mm [Ø 0.24 in]
10,9 mm[0.43 in]
Locking lever dimensions for double pole TL toggles
26,67 mm[1.05 in]
Ø 10,67 mm[Ø 0.42 in]
34° ±8°total travel
17° ±4°
2,28 mm [0.090 in]approx. pullout to change position
Sensing and Internet of Things 9
MICRO SWITCH Military-Grade Toggle Switches, TL Series
TL SERIES 4-POLE STANDARD ACTUATOR OPTIONS, TERMINALS, & DIMENSIONSNote: Three-position switches shown
4TL1: Four-pole, standard lever, screw terminals
14TL1: Four-pole, standard lever, solder terminals
104TL1: Four pole, standard lever, IWTS terminals
1,93 mm ±0,20 mm wide keyway
[0.076 in ±0.008 wide keyway]
10,9 mm[0.43 in]
34° ±8° total travel
17° ±4°
10,9 mm[0.43 in]
Ø 6,09 mm [Ø 0.24 in]
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS 2A thread to within 1,52 mm [0.060 in] of shoulder
3,05 mm [0.12 in]
11,9 mm[0.47 in]
17,01 mm[0.67 in]
27,94 mm[1.10 in] 3,3 mm min.
[0.130 in min.]
6,1 mm [0.24 in]
34,29 mm[1.35 in]
6,6 mm[0.26 in]
41,66 mm[1.64 in]
9,4 mm[0.37 in]
33,53 mm[1.32 in]
19,05 mm[0.75 in]
9,7 mm[0.38 in]
7,1 mm [0.28 in]
9,4 mm[0.37 in]
9,4 mm[0.37 in]
6,4 mm [0.25 in]
3,3 mm min. [0.130 in min.]
12X 6-32 UNC-2 X(0.260) binding headterminal screw andlockwasher (sems)
3 2 1
9 8 7
6 5 4
12 11
10
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS-2thread to within 1,52 mm [0.060 in]of shoulder
3,3 mm min.[0.130 in min.]
0,76 mm [0.03 in] (12)
4,57 mm dia [0.18 in dia] (12)2,29 mm dia [0.09 in dia] (12)
4,83 mm dia [0.19 in dia] (12)
33,53 mm[1.32 in]
41,7 mm[1.64 in]
19,05 mm[0.75 in]
9,4 mm[0.37 in]
9,7 mm[0.38 in]
7,1 mm[0.28 in]
6,6 mm[0.26 in]
9,4 mm[0.37 in]
9,4 mm[0.37 in]
6,09 mm [0.24 in]
17,0 mm [0.67 in]
11,9 mm [0.47 in]
34,29 mm[1.35 in]
27,94 mm[1.10 in] 3,3 mm min.
[0.130 in min.]
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
Ø 6,09 mm [Ø 0.24 in]
10,9 mm[0.43 in]
34° ±8° total travel
17° ±4°
3,05 mm[0.12 in]
3
25
8
1
6 4
9 7
12
10
11
1,93 mm ±0,20 mm wide keyway[0.076 in ±0.008 wide keyway]
Ø 6,09 mm [Ø 0.24 in]
10,9 mm[0.43 in]
34° ±8° total travel
17° ±4°
3,05 mm[0.12 in]
Sealed to prevent entrance ofliquids or dust
15/32 - 32 UNS-2thread to within 1,52 mm [0.060 in]of shoulder
6,09 mm [0.24 in]
17,0 mm [0.67 in]
11,9 mm [0.47 in]
37,3 mm[1.47 in]
Terminals accept PIN M39029/1-102
33,53 mm [1.320 in]
Sealed construction(blue seal)
9,7 mm[0.38 in]
9,7 mm[0.38 in]
9,7 mm[0.38 in]
9,7 mm[0.38 in]
9,7 mm[0.38 in]
41,7 mm[1.64 in]
Locking lever dimensions for four-pole TL toggles
26,67 mm[1.05 in]
Ø 10,67 mm[Ø 0.42 in]
34° ±8°total travel
17° ±4°
2,28 mm [0.090 in]approx. pullout to change position
10 sensing.honeywell.com
MICRO SWITCH Military-Grade Toggle Switches, TL Series
MICRO SWITCH TL SERIES LOCKING CONFIGURATIONS
Warranty/RemedyHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the appli-cable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defec-tive. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is buyer’s sole responsibility to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
005430-4-EN | 4 | 02/19© 2019 Honeywell International Inc. All rights reserved.
m WARNINGPERSONAL INJURYDO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious injury.
m WARNINGMISUSE OF DOCUMENTATION• The information presented in this product sheet is for
reference only. Do not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or serious injury.
Honeywell Sensing and Internet of Things9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywell.com
ADDITIONAL MATERIALSThe following associated literature is available on the Honeywell web site at sensing.honeywell.com:
• Product installation instructions
• Product range guide
• Product application-specific information
– Flight deck toggle switches
– Sensors and switches in front loaders
– Sensors and switches in mobile cranes
– Sensors and switches in oil rig applications
For more informationHoneywell Sensing and Internet of
Things services its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or the
nearest Authorized Distributor, visit
sensing.honeywell.com or call:
Asia Pacific +65 6355-2828
Europe +44 1698 481481
USA/Canada +1-800-537-6945