Water PurificationSelection Guide
www.johnmorrisgroup.com
www.johnmorrisgroup.com 2
Our portfolio of water purification systems include a broad range of ultrapure, pure & Reverse Osmosis (RO) water designed for all labs (in both validated & non-validated environments).
To ensure you select the right instrument, follow these steps:
Define the suitable applications of use (this identifies the level of purity & ‘type’ of water required) Establish the initial source of water to be purified (ie from a tap or pure water) Determine how much water you need (litres per day or hour)
For adherence to strict quality IQ/OQ standards
(where validation & recording of data is essential)
For greater choice & flexibility in supplying daily water
requirements for various usage applications
Applications Water ‘Type’
1 12 23 3
Water ‘Type’Applications
Type 1
Ultrapure Water
Type 2
Pure Grade Water
Type 3
Pure Grade General Lab
Resistivity (MΩ.cm @ 25°C) >18 >1.0 >0.05TOC ppb (µg/L) <10 <50 <200Pyrogens (EU/mL) <0.03* n/a n/aParticulates >0.2 µm (units/mL) <1 n/a n/aSilica (ppb) <10 <10 <1,000Bacteria (cfu/mL) <1 <100 <1,000
Highest grade of water purification - suitable for critical lab applications
Very low organic contaminants - suitable for general lab needs
or to feed Type 1 water
RO water suitable for non-critical applications or to feed Type 1 water
* With BioPak Polisher as Application Pak Water specifications are guidelines only
Hydroponics -IC (Ion Chromatography) - -ICP-MS & ICP-OES - -In Vitro Fertilization (IVF) - -Kjeldahl Analyser - -Langmuir Monolayer Analysis - -LC (Liquid Chromatography) - -LC-MS - -Lithography - - Microarray - -Microbiological Culture Media Preparation - -NP Analysers (Nitrogen-Phosphorus Analysers) -Nuclease-Free Water / RNase-Free Water - -Particulate Analysers - -PCR (Polymerase Chain Reaction) - -pH Measure - -Semiconductors - -Spectrophotometry - -Stability Test Chambers - -Titration -TOC Analysers (Total Oxidisable Carbon) - -Turbidimeter -UHPLC (Ultra HPLC) - -VOC (Volatile Organics Analysis) - -Weatherometers - -
Applications by Water ‘Type’
‘Types’ of Water Purification
AA (Atomic Absorption) - -Animal Care Facilities - Animal Watering - - Aquariums - - Autoclaves - - Blotting (Northern, Western, Southern) - -BOD (Biological Oxygen Demand) - -Buffers Preparation -Capillary Electrophoresis - -Cell Culture Media & Buffers - -Clinical and Biomedical Laboratories -COD (Chemical Oxygen Demand) - -Colorimetric Tests & Measures -DHPLC - -Dissolution Testing -DNA Sequencing - DNA Sequencers - -Electrophoresis - -Endocrine Disruptors Analysis - -Fuel Cells - -GC (Gas Chromatography) - -GFAA (Graphite Furnace Atomic Absorption) - -Glassware Washing / Washers - Heating Baths (water for) - - Histology -HPLC (High Performance Liquid Chromatography) - -Hydrogen Generators - -
Australia - Free Call: 1800 251 799 3 New Zealand - Toll Free: 0800 651 700
To ensure you select the right water purification instrument for your needs, contact John Morris Group for professional assistance
Sales Consumables Accessories Service & Repair
Type 1 & 2 Combined
Required Water Purity Water Source
Resistivity(MΩ.cm @
25°C)L/dayMax
L/minMax
Water Flow Rate TOCppb (µg/L)
Bacteria (cfu/mL)
Suitable Product
Page
Type 1 & 3 Combined
Type 1
Type 2 (DI)
Type 3 (RO)
Biomedical Water
Ultrapure
Pure (DI)
Ultrapure
Pure (RO)
Ultrapure
Ultrapure
Ultrapure
Ultrapure
Pure
Pure
Pure
RO
Tap
Tap
Tap
Tap
Pure
Pure
Pure
Pure
Tap
Tap
Tap
Tap
Tap
2.0
2.0
2
15
2.0
2.0
>0.5
12
2.0
Gravity Fed
Gravity Fed
0.4
4
18.2
>5
18.2
18.2
18.2
18.2
18.2
>5
>5
>5
<5
<30
≤5
≤5
≤5
≤5
<20
<30
<30
<30
<0.1
<0.1
<0.1
<10
<0.1
<10
<10
<10
<0.1
Typical Rejection >99%
Typical Rejection >99%
10 <30
<0.1360
250
4
<0.1 4
5
5
5
5
6
6
6
7
7
Milli-Q Advantage A10
Milli-Q Reference / A+
Simplicity
Super-Q Plus
Elix Advantage
Elix Essential
Elix Reference
RiOs Systems
AFS Systems
Milli-Q Integral
Milli-Q Direct
250
200
10
12,000
300
300
300
8,000
3,000
Instrument Summary
TOC: Total Organic Carbon (water quality measurement - level of carbon present in organic compounds) ppb: parts per billion DI: Deionized Water RO: Reverse Osmosis
www.johnmorrisgroup.com 4
Ultrapure & Pure Water from the Tap
Milli-Q Integral
Milli-Q Direct
Type 1 & 2 Water - combined in one unit Ultrapure water (Type 1) dispensed via up to 3 Q-PODs Pure water (Type 2) dispensed via E-POD Manual or automatic water delivery (with high or low flow) I/Q & OQ validation - exact water quality assured TOC monitor Application Paks to remove specific contaminants
Type 1 & 3 Water - combined in one unit
Ultrapure water (Type 1) dispensed via Q-POD Type 3 (RO) pure water sourced either through tank valve or to feed instruments (such as a glassware washing machine) I/Q & OQ validation - exact water quality assured Up to 350 L reservoir tank Application Paks to remove specific contaminants
Australia - Free Call: 1800 251 799 5 New Zealand - Toll Free: 0800 651 700
Ultrapure Water from Pure Water
Type 1 Water Type 1 Water Type 1 Water
Q-POD dispenses water (optional) Application Paks to remove specific contaminants TOC indicator included with Milli-Q Reference A+
A portable & basic solution - place anywhere in the lab Integrated reservoir Recirculates water to maintain quality
A high-flow water system providing the ‘final polish’ to RO, distillation or deionization water No degrading of water quality over time
Milli-Q Reference / A+ Simplicity Super-Q Plus
Milli-Q Advantage A10
Type 1 Water Ultrapure water (Type 1) dispensed via up to 3 Q-PODs TOC & resistivity monitoring Internal UV lamp for low TOC Type 1 Application Paks to remove specific contaminants Compact - place under the bench or on the wall
www.johnmorrisgroup.com 6
Pure Water from Tap Water
Type 2 Water Type 2 Water
Intelligent RO controls water consumption Constant product flow rate & optimal water quality
Pure water stored in a tank Water sourced via valve or fed directly to lab instruments
Elix Advantage
Elix Essential Elix Reference
State-of-the-art electrodeionization technology ensures delivery of constant & reliable Type 2 water - replaces chemical regeneration of conventional ion-exchange systems plus removes chemical or resin disposal needs
Elix systems provide the best feed water for all Milli-Q ultrapure systems
Type 2 Water
Pure water dispensed via up to 3 E-PODs I/Q & OQ validation - exact water quality assured Compact - place anywhere in the lab Application Paks to remove specific contaminants
Australia - Free Call: 1800 251 799 7 New Zealand - Toll Free: 0800 651 700
RO Water from Tap Water
Application Pak Polishers
Best-in-Class Elix® EDI Technology
Biomedical Water Solutions
Ideal for non-critical lab applications (glassware rinsing, hydroponics, water baths) Feed water for humidifiers, autoclaves, glassware washers & ultrapure water systems Choose models from 5 to 200 L
Elix® EDI module uses electrodeionization to remove remaining ions - included in all Elix (Type 2) systems plus Milli-Q Integral (Type 1)
Consistent high-quality water - resins do not degrade (as no expose to harsh regeneration chemicals or removed from the system) No extra softeners needed Minimal electricity consumption - uses equivalent of electric light bulb energy Uninterrupted water production - continuously regenerated ion-exchange resins eliminate hazardous chemical regeneration or costly resin replacement
Application Pak polishers can be added to PODs to remove specific contaminants that impact specific applications (HPLC, LC-MS, MALDI-ToF-MS, IC, ICP, AA & most analytical techniques)
Provides superior & consistent water quality Complies with clinical laboratory reagent water (CLRW) guidelines Choose models from 8 to 150 L/h flow rates Full monitoring & water quality archiving capabilities
RiOs Systems
MilliPak Polisher BioPak Polisher LC-Pak Polisher VOC-Pak Polisher EDS-Pak Polisher
AFS Systems
RiOs systems are suitable for reliable, constant production of Reverse Osmosis (RO) water
Bacteria-free &particulate-free water
Pyrogen-free &nuclease-free water
Water for ultra-traceorganic analysis
Water for volatile organic compounds analysis
Water for endocrinedisrupters experiments
Significantly reduce water consumption - ideal where sample throughput often greater than several thousand samples per day
www.johnmorrisgroup.com
Whilst John M
orris Group has taken every care to ensure the accuracy of information contained within this Guide, no responsibility for errors or om
issions is accepted.
Australia
Address 61-63 Victoria Avenue Chatswood NSW 2067 AustraliaFree Call 1800 251 799Enquiries +61 (0) 2 9496 4200 Email [email protected]
At John Morris Group we offer more than just the product - we provide the full package -
sales and servicing of instrumentation plus design tailored solutions to meet your needs.
We offer more than 'just the box'
SupportSalesSolutions Service
New Zealand
Address 78 Wellesley Street Auckland NZ 1010Toll Free 0800 651 700Enquiries +64 (0) 9 366 3999 Email [email protected]