MCLASS The best of the best from Memphis!
For the most discerning audiophiles, MClass is the best of the best. We use
our highest quality parts for crystal clear sound to bring out the most in your
music. MClass products offer an industry leading warranty when installed by
an authorized Memphis Car Audio dealer.
MCLASS AmplifiersTotally redesigned for 2013, the all new MClass line of Amplifiers debut
a completely new list of features and capabilities. Together with the Big-
Power MOJO amps, the MClass is the ultimate in performance to give the
most RESPECT to your music!
1 2
PART NUMBER 16-MCX4.75 16-MCX3.750 16-MCX1.1100 16-MJ5.1400 16-MJ1.2200 16-MJ1.4200 RMS POWER 4 Ohm (w) 75x4 75x2+200x1 320 x1 75x4+320X1 550x1 1100X1RMS POWER 2 Ohm (w) 115x4 115x2+300x1 550x1 115x4+550x1 1100x1 2200x1RMS POWER 1 Ohm (w) N/A N/A + 600x1 1100x1 N/A + 1100x1 2200x1 4200x1BRIDGED MONO POWER 4 Ohm (w) 230x2 230x1+N/A N/A 230x2+N/A N/A N/A THD 4 Ohm (%) <.05 <.05/0.3 <0.3 <.05/0.3 <0.3 <0.3FREQUENCY RESPONSE 20Hz-20kHz 20Hz-20kHz 20Hz-250Hz 20Hz-20kHz 20Hz-250Hz 20Hz-250HzDIMENSIONS (in) ____ (l) 9 x (w) x 2.56 (h) 14.76 14.76 14.76 22.6 20.6 26.5RECOMMENDED AMP KIT 17-4GKIT 17-4GKIT 17-4GKIT 17-0GKIT 17-0GKIT 17-0GKIT
AMPLIFIERS
NEW FOR 2013
a completely new list of features and capabilities. Together with the Big-
Power MOJO amps, the MClass is the ultimate in performance to give the
most RESPECT to your music!
MDACMemphis Distortion Analysis Control Gives the installer a visual indication of clipping on the amplifier, enabling more accurate setting of the optimum sensitivity level for best sound quality and maximum performance.
MTLCMemphis Total Level Control Allows the user to adjust the final output of the amplifier without altering the installer’s crucial original sensitivity settings.
MRCS Memphis Rapid Crossover System 24dB/Octave crossover slopes get to the desired crossover point quickly and accurately for better sound quality
MBIGMemphis Bass Intensity Generator Increases the intensity of the amplifier’s low frequency output – centered at 45Hz.
Exclusive MClass Amp Features
MDAC
MBIG
MTLC
MRCS
MClass SubwoofersOur Most Versatile Subwoofer EverMClass Reference gives solid, deep bass while being flexible enough
to work in a variety of enclosures. The MCR sub is ideal for any
user – especially those who are ready for a step up from our
Power Reference sub.
Carbon layered cone
4-layer winding on a 2” Kapton® voice coil (1½” on MCR8)
Double roll butyl rubber surround stitched to the cone
Dual flat spiders with graduated rolls
Vented basket and vented spider spacer
Single or dual 4Ω voice coil
MCLASS The best of the best from Memphis!
SUBWOOFERS
voice coil (1½” on MCR8)
d stitched to the cone
ed rolls
der spacer
Unloaded Enclosures See Pg. 11 Subwoofer Grills See Pg. 23
3
8” 10” 12”
PART NUMBER 15-MCR8S4 / 15-MCR8D4 15-MCR10S4 / 15-MCR10D4 15-MCR12S4 / 15-MCR12D4RMS / PEAK (w) 150 / 300 300 / 600 300 / 600SENSITIVITY (dB) 85 82 83MAGNET SIZE (oz) 41 65 65MOUNTING DEPTH (in) 4.25” 5.1” 5.5”
Memphis Reference Subwoofers Great Memphis sound. 3” deep or less.
MR Enclosures
Our best SQ sub is great for the discerning audiophile, yet
fits in an incredibly small space. At only 2.8” deep for
the MR10 & 3” deep for the MR12, these subs will sound
sweet for anyone who likes to hear tight, controlled bass
from a small space.
If you need a great sounding enclosure for
your MR Subs, new for 2013 is the PEMR
line of boxes built especially for the MR
Subwoofers.”
Carbon honeycomb cone
Butyl rubber surround
Cast aluminum basket
Patented cone reinforcement design
Single or dual 4Ω voice coils
Minimum enclosure volume of 0.50 cubic feet
Required mounting depth of 3” or less
15-PEMR1x10 & 15-PEMR1x12 are shown with MR subwoofers installed, but are only available unloaded.
15-PEMR1x10 & 15-PEMR1x12 are shown with MRsubwoofers installed but are only available unloaded
MR SUBWOOFERS
MR
ENCLOSURES
10” 12”
PART NUMBER 15-MR10S4 15-MR10D4 15-MR12S4 15-MR12D4 RMS/PEAK 200 / 400 200 / 400 300 / 600 300 / 600SENSITIVITY 82 81 84 84MAGNET SIZE(oz) 35 35 43 43MOUNTING DEPTH (in) 2.8” 2.8” 3” 3”
PART NUMBER 15-PEMR1X10 15-PEMR1X12 DIMENSIONS (in) 18.5” x 15.35” x 4.3” 22.57” x 18.26” x 5.51”
4
SYNCHRONOUS
COMPONENT
SETS
TWEETER
ONLY
SETS
Using the most advanced materials and
construction techniques, MClass Separate
Components are the perfect choice for the
SQ purist. The smooth sounding aluminum
tweeters are easy to mount in a variety of
places making them a great complement to
any installation. The unique design of the
Synchronous Components allows the
tweeter to be either on the same axis as the
mid, or detached and mounted separately.
MClass Separate and Synchronous Component Speakers
15-MCS5A 15-MCS6A 5.25 6.5 40 / 80 50 / 100 88 89 10 13 2.52” 2.75”
PART NUMBER 15-MCC6ASIZE (in) 6.5 RMS / PEAK (w) 75 / 150 SENSITIVITY (dB) 88 MAGNET SIZE (oz) 12.6 MOUNTING DEPTH (in) 2.6”
15-MC1AM 15-MC1S 1 1 50 / 100 50 / 100 88 88 0.37 0.37 0.6875” 0.6875”
SEPARATE
COMPONENT
SET
SYNCHRONOUS
COMPONENT WITH TWEETER
MCLASS The best of the best from Memphis!
e
e
m
to
he
y.
COMPONENT WITH TWEETER
5
MClass Coaxial speakers are efficient so they sound great with a minimal
amount of power. These speakers sound good with head unit power and
great with an amp! The Magnesium Aluminum Dome tweeter provides
crystal clear sound at all times. Because these speakers use an outboard
crossover, they can even be bi-amped.
Pivot mount aluminum/magnesium dome tweeter
Tweeter protection
Carbon honeycomb cone
Butyl rubber surround
MClass Coaxial Speakers
PART NUMBER 15-MC42 15-MC462 15-MC52 15-MC572 15-MC62 15-MC6202 15-MC692SIZE (in) 4” 4” x 6” 5.25” 5” x 7” 6.5” 6.5” oversized 6” x 9”RMS / PEAK (w) 30 / 60 30 / 60 40 / 80 50 / 100 50 / 100 50 / 100 60 / 120SENSITIVITY (dB) 87 87 88 88 89 89 91MAGNET SIZE (oz) 8 10 10 10 10 10 13 MOUNTING DEPTH (in) 1.75” 2.125” 2.2” 2.125” 2.25” 2.5” 3”
COAXIAL
6
M5 MOJO 5
Vented cast aluminum basket
4-layer copper wound voice coil
Fiberglass reinforced cone
Stitched rubber surround
10” 12” 15”
PART NUMBER 15-M510D2 15-M510D4 15-M512D2 15-M512D4 15-M515D2 15-M515D4RMS / PEAK (w) 400 / 800 400 / 800 600 / 1200 600 / 1200 800 / 1600 800 / 1600SENSITIVITY (dB) 82 83 84 85 86 87MAGNET SIZE (oz) 120 120 120 120 120 120MOUNTING DEPTH (in) 6.75” 6.75” 7.5” 7.5” 8.5” 8.5”
12” 15”
15-MOJO512D2 15-MOJO512D4 15-MOJO515D2 15-MOJO515D4 1100 / 2200 1100 / 2200 1750 / 3500 1750 / 3500 81 82 84 85 196 196 196 196 8” 8” 8.86” 8.86”
3” High temperature aluminum voice coil former2 ½” High temperature aluminum voice coil former
MOJO5M5
The M5 is the subwoofer that gives you a great combination of low bass and high output, while its big brother the
MOJO5 steps up the game with beefier magnets and a bigger voice coil. For the ultimate in performance, the MOJOX
is the biggest and baddest Memphis Sub out there!
l i
M5/MOJO Want to make some noise?
7
MOJO X
MOJO PRO
NEW FOR 2013
If you want your mids and highs to be as loud as your subwoof-
ers, in 2013 Memphis Car Audio proudly introduces the MOJO
Pro lineup of Component loudspeakers. Built to play loud in
any application, the 6 ½” and 8” mids, along with the bullet
style tweeters are the first ever component loudspeakers wor-
thy of the name “MOJO”!
MOJO Pro Midranges and TweetersMOJO goes full range
12” 15”
Part Number 15-MOJOX12D2 15-MOJOX15D2 15-MOJOX15Q1RMS/PEAK (w) 1750 / 3500 2200 / 4400 2200 / 4400SENSITIVITY (dB) 81 85 84MAGNET SIZE (Oz) 235 235 235MOUNTING DEPTH (in) 9” 9.41” 9.41”
PART NUMBER 15-MJP6 15-MJP8 15-MJPTDESCRIPTION 6 ½” Pro Audio Component 8” Pro Audio Component ProAudio TweeterRMS/PEAK (W) 125/250 150/300 100/200 SENSITIVITY (dB) 93 94 100IMPEDANCE 4 Ohm 4 Ohm 4 OhmMOUNTING DEPTH (in) 3” 3.6” 1.5”
MOJOX
COMPONENT TWEETERS
MOJO X
12”12” 15
Number 15-MOJOX12D2 15-MOJOX15D2(w) 1750 / 3500 2200 / 4400
B) 81 85235 2359” 9.4
8
Great sound - Booming Bass – Products to fit every vehicle. Power Reference
amps, subs and speakers are designed with everyday use in mind so you can
depend on them to sound great no matter how you listen to music.
All new for 2013 is the PRX line of Power Reference Amplifiers. Featuring a removable
top cover, these amps have an elegant look that puts them above the rest.
POWER REFERENCE Products to fit your lifestyle.
p g
top cover, these amps have an elegant look that puts them above the rest.
PR Amplifiers Great Sound. All New Look.
NEW FOR 20139
Compact Aluminum Chassis
0 – 12dB Bass Boost at 45 Hz
Remote Level Control Included on All Models
PART NUMBER 16-PRX2.50 16-PRX2.100 16-PRX4.50 16-PRX5.550 RMS POWER 4 Ohm (w) 50 x 2 100 x 2 50 x 4 50 x 4+200 x 1RMS POWER 2 Ohm (w) 75 x 2 150 x 2 75 x 4 75 x 4+300 x 1RMS POWER 1 Ohm (w) N/A N/A N/A N/ABRIDGED MONO POWER 4 Ohm (w) 150 x 1 300 x 1 150 x 2 150 x 2 + N/ATHD % 4 Ohm < .05 < .05 < .05 < .05FREQUENCY RESPONSE 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHzDIMENSIONS (in) ___ (l) x 7.2 (w) x 2 (h) 8.4” 13.2” 13.2” 15.4” RECOMMENDED AMP KIT 17-10GKIT 17-8GKIT 17-8GKIT 17-4GKIT
16-PRX1.500 16-PRX1.1000 200 x 1 400 x 1 350 x 1 750 x 1 500 x 1 1000 x 1 N/A N/A < .3 < .3 20Hz-250Hz 20Hz-250Hz 10.3” 13.2” 17-4GKIT 17-4GKIT
FULL RANGE MONO BLOCK
10
PR Subwoofers Our #1 Selling Subwoofer
Memphis Unloaded Enclosures
The big M logo has always stood for booming bass and high output. The PR is no exception
to that tradition. We also have enclosures designed to make these subwoofers sound great!
Need a good looking, solid sounding enclosure to improve the sound of your subwoofer? These
Memphis Unloaded Enclosures will make your ordinary subwoofers sound extraordinary.
High temperature TIL voice coil former
Lightweight cone for increased efficiency
High strength wide roll surround
Improved suspension and coil design
Upgraded voice coil size to 2.5”on PR 15” models
All Enclosures Made in USA with .75” MDF Material
Quick Release Terminals
Carpeted with Embroidered Memphis Logo
SUBWOOFERS
UNLOADED ENCLOSURES
10” 12” 15”
PART NUMBER 15-PR10S4V2 15-PR10D4V2 15-PR12S4V2 15-PR12D4V2 15-PR15S4V2 15-PR15D4V2RMS / PEAK (w) 250 / 500 250 / 500 250 / 500 250 / 500 250 / 500 250 / 500SENSITIVITY (dB) 83 84 86 86 86 85MAGNET SIZE (oz) 60 60 60 60 60 60MOUNTING DEPTH (in) 5.18” 5.18” 5.54” 5.54” 6.73” 6.73”
PART NUMBER 15-PE1 x 10V2 15-PE1 x 12V2 15-PE1 x 15V2 15-PE2 x 10V2 15-PE2 x 12V2DESCRIPTION Single 10 Single 12 Single 15 Dual 10 Dual 12DIMENSIONS (in) l x w x h 12 x 17 x 12 15 x 20 x 14 16 x 29.25 x 17 15 x 28 x 12.5 17.5 x 31 x 14AIR SPACE (cu ft) 0.99 1.8 3.6 2.27 3.41
POWER REFERENCE
Subwoofers Sold Separately
11
P
PR Component and Coaxial SpeakersFits All Vehicle ApplicationsSince 1998, Power Reference Speakers have been our #1
selling product line. With sizes to fit virtually any vehicle
and swivel tweeters to custom tailor the location to the
way you like to listen to music, PR speakers are proof
that great sound CAN come from an easy installation.
Polypropylene cone
Polyurethane surround
PEI dome tweeter
Kapton® voice coils
PART NUMBER 15-PR1V2 15-PRS5V2 15-PRS6V2SIZE (in) 1” 5.25” / 1” 6.5” / 1” RMS / PEAK (w) 50 / 100 40 / 80 50 / 100SENSITIVITY (dB) 87 88 88MAGNET SIZE (oz) 0.75 10 10MOUNTING DEPTH (in) 0.75” 2.125” 2.5”
COMPONENT
PART NUMBER 15-PR275 15-PR32V2 15-PR42V2 15-PR4102V2 15-PR462V2 SIZE (in) 2.75 3.5 4 4 X 10 4 X 6 RMS / PEAK (w) 15/30 15 / 30 20 / 40 50 / 100 30 / 60 SENSITIVITY (dB) 85 87 86 89 86 MAGNET SIZE (oz) 3 7 8 13 11 MOUNTING DEPTH (in) 1.25” 1.5” 1.75” 2.5” 2.125
15-PR52V2 15-PR572V2 15-PR62V2 15-PR63V2 15-PR620V2 15-PR692V2 15-PR693V2 5.25 5 X 7 6.5 6.5 6.5 Oversized 6 x 9 6 x 9 30 / 60 40 / 80 50 / 100 50 / 100 50 / 100 60 / 120 60 / 120 87 88 88 88 88 90 90 9 10 10 10 10 14 14 2.125” 2.125” 2.25” 2.25” 2.50” 3” 3”
COAXIAL
PR COMPONENT
COAXIAL
12
STREET REFERENCE Sound that’s bigger than your wallet.
Street Reference comes with all the features and reliability you
would expect from a Memphis product, but at a surprisingly
low price point. If you’re looking for value, look no further
than Street Reference.
SRX Amplifiers All New Look
NEW FOR 2013
SRX Bass System It’s All About the PackageBe loud and proud with this 12” ported enclosure loaded with two SR subwoofers and powered
by an SRX amplifier.
The very definition of power simplified. No frills, just watts.
15-SRX2X12 Dual 12” ported Memphis enclosure
16-SRX1.250 Amplifier included
SR 12” 4 ohm SVC subwoofers included
Single terminal for easy installation
Remote gain control included
Enclosure dimensions 31.75” (w) x 15” (d) x 15.75” (h)
Textured aluminum heatsink
Hi-level inputs
Selectable bass boost on all models
Remote gain control with mono amps
Variable subsonic filter (mono)
No frills, just watts.
13
SR Coaxial Speakers Big soundSR coaxials prove that a small budget can
still produce BIG sound.
10” 12”
PART NUMBER 15-SR10S4 / 15-SR10S8 15-SR12S4 / 15-SR12S8RMS / PEAK (w) 200 / 400 250 / 500 SENSITIVITY (dB) 84 85 MAGNET SIZE (oz) 30 40MOUNTING DEPTH (in) 4.8” 5.5”
PART NUMBER 15-SR1 15-SR42 15-SR462 15-SR52 15-SR572 15-SR62 15-SR693SIZE (in) 1 4 4 x 6 5.25 5 x 7 6.5 6 x 9RMS / PEAK (w) 20 / 120 20 / 40 25 / 50 20 / 50 30 / 60 30 / 60 50 / 100 SENSITIVITY (dB) 97 88 86 88 90 88 90 MAGNET SIZE (oz) N/A 5.4 5.4 5.4 7.5 11.2 16.6MOUNTING DEPTH (in) Surface 2 2 2 2.25 2 3
PART NUMBER 16-SRX2.150 16-SRX4.300 16-SRX1.250 16-SRX1.500RMS POWER 4Ω (w) 50 x 2 50 x 4 150 x 1 350 x 1RMS POWER 2Ω (w) 75 x 2 75 x 4 250 x 1 500 x 1BRIDGED MONO POWER 4Ω (w) 150 x 1 150 x 2 N/A N/ATHD % 4Ω <0.1% <0.1% <0.5% <0.5%FREQUENCY RESPONSE 20Hz-20kHz 20Hz-20kHz 20Hz-250Hz 10Hz-250HzDIMENSIONS (in) ___ (l) 8.85(w) x 2(h) 9.75” 13.75” 11.6” 17.5”RECOMMENDED AMP KIT 17-10GKIT 17-8GKIT 17-8GKIT 17-4GKIT
Butyl rubber surround
Injection molded polypropylene cone
Oversized center pole vent
Lightweight foam surround
Mylar tweeter
Treated paper cone
Shallow mounting depth
SUBWOOFERSAMPLIFIERS
SUBWOOFERS
SR Subwoofer Loud and proud
14
SPECIAL APPLICATION Great Memphis sound wherever you go.
Memphis Car Audio’s all new Special Application products are the perfect
solution for todays on the go user. Our new SA225 is an amp that works
perfectly with your smart phone, MP3 player, or other portable music
device. Just plug it right in! Don’t want to hassle with wires? Use our
all new SABTS to wirelessly stream your music from your smart phone,
or any other Bluetooth compatible device. The SABTS can connect to
any amplifier, or head unit for wireless connection of your device.
2 x 25W Amplifier3.5mm Audio input jack with RCA adaptor
25Wx2 @ 2 Ohms Integrated Circuit output
Input sensitivity range – 329mV – 2.32V
Dimensions: 4.25” x 3” x 1.5”
Bluetooth® Streaming AccessoryWeather Resistant Controller
3.5mm audio output with RCA adaptor
5.5’ Cable
Handlebar & Surface Mount Kits Included
Controls Volume, Track, & Pause
Connects wirelessly from your smart phone or any other Bluetooth compatible source
ALSO AVAILABLE IN A COMBO PACK - 16-SA225BTS
16-SABTS
16-SA225
15
The SA4.50 and SA1.300 AmplifiersTiny enough to fit almost anywhere for great sound in incredibly small spaces.
ACTU
AL S
IZE
High/low level inputs
Variable high/low pass crossover (SA4.50)
40-400Hz bass boost (SA1.300)
PART NUMBER 16-SA4.50 16-SA1.300 RMS POWER 4 OHMS (W) 50 X 4 200 X 1RMS POWER 2 OHMS (W) 75 X 4 300 X 1BRIDGED POWER (W) 150 X 2 N/ATHD % 4 OHM .05 .1FREQUENCY RESPONSE 20HZ – 20KHz 20HZ – 250Hz DIMENSIONS 4.4” (w) x 5.4” (l) x 1.5” (h) 4.4” (w) x 5.4” (l) x 1.5” (h)
FULL RANGE
CLASS D
y g y g
ACTU
ALSI
ZE
16
Marine Subwoofers
Marine Amplifiers Our marine amps are packaged with a sleek look. The circuit boards are coated to seal
all the components from virtually any extreme environment. These amps are specifically
engineered for maximum output from a compact size.
Bass as deep as the big blue sea. The Memphis
Marine subwoofers generate rich, accurate
bass while remaining flexible enough to work
in a variety of enclosures.
MARINE AMPLIFIERS FULL RANGE CLASS D
Variable high/low pass filters
2/3/4 channel modes (2, 4, 5 ch)
Variable subsonic filter (mono)
Variable bass boost up to 18dB (mono)
Remote level control included (mono)
Independent full range/sub dual level control (5 ch)
Gold plated terminals
Mica injected cone for UV protection
High temperature resistant ABS plastic baskets
Stainless steel hardware
h)
8” 10” 12”
PART NUMBER 15-MM8D4 15-MM10D4 15-MM12D4RMS / PEAK (w) 100 / 200 200 / 400 200 / 400 SENSITIVITY (dB) 85 86 88 MAGNET SIZE (oz) 30 53 53MOUNTING DEPTH (in) 4.5” 4.53” 5.91”
SUBWOOFERS
PART NUMBER 16-MM4.480 16-MM1.600 16-MM5.750RMS POWER 4Ω 80 x 4 250 x 1 80 x 4 / 200 x 1RMS POWER 2Ω (w) 120 x 4 400 x 1 100 x 4 / 350 x 1 RMS POWER 1Ω (w) N/A 600 x 1 N/ABRIDGED MONO POWER 4Ω (w) 240 x 2 N/A 200 x 2 / N/ATHD % 4Ω 0.07% 0.03% 0.07% / 0.05%FREQUENCY RESPONSE 20Hz-20kHz 20Hz-250Hz 20Hz-20kHz / 20Hz-250HzDIMENSIONS (in) __ (l) x 7.25 (w) x 2.33 (h) 10.5” 10.5” 12.13”RECOMMENDED AMP KIT 17-8GKIT 17-4GKIT 17-4GKIT
AMPLIFIERS
/ N/A0.05%20Hz-250Hz3”KIT
MEMPHIS MARINE That’s not the tide rockin’ your boat!
17
TOWER
SPEAKERS
Get on board with a great speaker that sounds as good
docked as it does at sea.
Whether you’re at the end of a tow rope or the back of a trail ride,
Memphis’ horn loaded tower speakers make sure that your music
will always be louder than your motor. Using the same technology as
football stadium speakers, Memphis’ tower speakers are designed
to be acoustically accurate even at incredible distances.
Marine Coaxial Speakers
Aluminum magnesium alloy dome tweater
Mica injected cone for UV protection
ABS plastic baskets
Stainless steel hardware
Aluminum mesh grille inserts
Available in gun metal gray or white
2 ohm design
Compression horn tweeter design
Water resistant UV coated housing for use in harsh environments
Adjustable aluminum mounting hardware
Tower Speakers
PART NUMBER 15-MM62 15-MM692 15-MM82SIZE (in) 6.5 6 x 9 8RMS / PEAK (w) 50 / 100 60 / 120 60 / 120 SENSITIVITY (dB) 88 89 89 MAGNET SIZE (oz) 10 14 14MOUNTING DEPTH (in) 2.5” 3.27” 3.35”
COAXIAL
PART NUMBER 15-MM62T / 15-MM62TWCOLOR Gun Metal Gray / WhiteWOOFER SIZE (in) 6.5”IMPEDANCE 2 ohmsRMS / PEAK (w) 100 / 200DIMENSIONS (in) 11.07” x 8.26”CLAMP FIT 1.75” to 3” tube
od
18
Source UnitRugged Enough to Carry theMemphis NameThe Memphis MM2 Source Unit and Controller has the sealed chassis needed to with-
stand the rigors of marine, ATV/UTV, and outdoor use. Even though the MM2 is rugged,
it still delivers great audio features to put the Beat right back in to that Unbeaten path!
5-line backlit display
IP 67 Water resistant(Source Unit and Controller)
Multi-function Menu-driven controls
Optional iPod/iPhone controllability
40Wx4 Power Output
AM/FM Tuner (US & European Standards)
Accepts up to two controllers
Auxiliary RCA Input
Two pair fading RCA outputs w/sub out.
USB Input
Optional Bluetooth streaming input
Six inputs and outputs
Signal sensing or manual turn on functionw/output
100Watts of speaker level input at 4 Ohms
9.5v line level output
Auto summing – takes 2 channels of input,sends up to 6 channels of output w/ousing jumpers
Remote level for bass channel with auxiliaryinput switching
Dimensions: 9.25” x 6.5” x 1.5”
(Source Unit) 8 ¼” (W) x 2 7/16” (H) x 4 1/8” (D)
16-MM2
PART NUMBER DESCRIPTION17-MM1iPod* iPod/iPhone adaptor cable17-MM2BTA Bluetooth streaming adaptor17-MM2DIN* Adaptor to mount controller in a single DIN location17-MM2EXT 12’ extension for MM2 controller to source unit16-MM2CP Secondary location controller* Will work on the MM1 as well
OPTIONAL
ACCESSORIES
MEMPHIS MARINE SIGNAL PROCESSORS
(Controller) 5 ½” (W) x 2 ¾” (H) x ¾” (D)
16-LL6ADo you want to keep the look of your factory system?
With the LL6A you get that great Memphis
sound while keeping the Bluetooth, navigation,
and steering wheel controls of your factory
system. If you want to listen to your MP3
player or smart phone with your factory
system, the LL6A has an auxiliary input to
make that as easy as pushing a button!
20
TWO CHANNEL
LINE DRIVER
4 BAND QUASI-
PARAMETRIC EQUALIZER
3-WAY CROSSOVER
16-VBF1
16-EQP4
16-CX23
4 BAND QUASI
6-EQP4
16-VBF1
PART NUMBER 16-VBF1MAXIMUM LEVEL INPUT (Vrms) 5MAXIMUM LEVEL OUTPUT (Vrms) 9SIGNAL TO NOISE RATIO (dB) >100THD% 0.01%
PART NUMBER 16-EQP4MAXIMUM LEVEL INPUT (Vrms) 50mV-3VrmsMAXIMUM LEVEL OUTPUT (Vrms) 7SIGNAL TO NOISE RATIO (dB) >110THD% 0.005%(Features aux input)
PART NUMBER 16-CX23MAXIMUM LEVEL INPUT (Vrms) 50mV-3VrmsMAXIMUM LEVEL OUTPUT (Vrms) 7SIGNAL TO NOISE RATIO (dB) >110THD% 0.005%Wired remote level control
3-WAY CROSSOVER
16-CX23
BASS 2.2
Crossovers/Equalizers
Make up for the sound that iPod® and MP3 players
compress with the Bass 2.2™.
2 channel line level adaptor/line driver
16-LLD2A
16- BASS2.2TM
LD2A
Max output 9Volts
100Watts of speaker level input at 4 Ohms
Signal sense and manual turn on function w/output
Wired remote level control
Restores lost range between 25Hz to 65Hz
Can be fed balanced or unbalanced inputs
Output range of 2.5V to 10V
Think you have too much of something, or is something missing? Memphis can help with virtually everything from put-
ting the control of your system at your fingertips to giving your amplifier a much needed input boost.
PART NUMBER 16-Bass 2.2MAXIMUM LEVEL INPUT (Vrms) 6 MAXIMUM LEVEL OUTPUT (Vrms) 10SIGNAL TO NOISE RATIO (dB) 110THD% 0.016%
21
BRASS
AMP POWER KITS
AMP INSTALLATION KITS
POWER/SPEAKER WIRE
ACCESSORIES Make it all Memphis
Don’t skimp on the things that allow your Memphis system to sound its best. Our connections, power kits, and RCAs are
designed to truly enhance Memphis amps, subs, and speakers. Use Memphis Connection to extend your warranty*.
PART NUMBER 17-0F025 / 17-0FB25 17-4F0100 / 17-4FB100 17-8F0250 / 17-8FB250GAUGE OF POWER WIRE (awg) 0 4 8FINISH M-Flex™ Soft PVC M-Flex™ Soft PVC M-Flex™ Soft PVC LENGTH (ft 25 100 250
PART NUMBER 17-DBLOCK 17-AFSFB 17-ANLFB 17-NPBAT 17-RVCDESCRIPTION Distribution Block AFS Fuse Holder ANL Fuse Holder + / - Battery Terminal Univ. Remote Lvl CntrlDISTRIBUTION INPUT/OUTPUT (3)0/4awg, (4)4/8awg (1)4/8awg, (1)4/8awg (1)0/4awg, (1)0/4awg (1)0/4awg, (1)0/4awg (2) RCA, (2) RCAFINISH Satin-M™ Chrome Satin-M™ Chrome Satin-M™ Chrome Satin-M™ Chrome Satin-M™ Chrome
17-16SW250 17-12SW250 17-16SW30 16 12 16 M-Flex™ Soft PVC M-Flex™ Soft PVC M-Flex™ Soft PVC 250 250 30
17-16SW60 17-12SW25 17-18REM1000 16 12 18 M-Flex™ Soft PVC M-Flex™ Soft PVC M-Flex™ Soft PVC 60 25 1,000
POWER / SPEAKER WIREMemphis power and speaker wire was designed with industry leading copper content making it the
perfect match to transfer all that power to and from your Memphis amplifiers. Available with a styl-
ish, frosted orange and black, flexible PVC jacket, Memphis wiring sets a fashion statement while
being easy to install.
BRASSNickel plating allows for increased power transfer in Memphis’ easy to use accessories. All pieces
are designed for audiophiles by audiophiles to make sure your amplifiers are getting the cleanest
power and the best protection.
PART NUMBER 17-4GPWKITGAUGE OF POWER WIRE (awg) 4FUSE HOLDER AFS
PART NUMBER 17-0GKIT 17-4GKIT 17-8GKI 17-10GKITGAUGE OF POWER WIRE (awg) 0 4 8 10FUSE HOLDER ANL ANL AFS ATCRCAs (3) ETP-17 (2) ETP-17 (1) ETP-17 (1) ETP-17
POWER KITS Everything you need all together for solid installation. Memphis’ amplifier installation
kits come with what you need to get the best power and signal to your amplifier.
FUSESMany fuses utilize soldered elements which lowers the accuracy and reliability of
the fuse, but Memphis only produces AFS and ANL fuses that are built from a single
element to ensure the most accurate ratings and reliability possible.
PART NUMBER 17-40AFS 17-50AFS 17-60AFS 17-70AFS 17-80AFS 17-100AFS 17-125AFS 17-150AFSFUSE RATING (amps) 40 50 60 70 80 100 125 150
17-100ANL 17-150ANL 17-200ANL 17-250ANL 100 150 200 250
AFS ANL
FUSES
22 *See Authorized Dealer for details.
ETP RCA’S
CAPACITORS
RCAsFor those interested in the truest sound reproduction possible, Memphis Connection
RCAs have the cleanest signal transfer of any RCAs we have ever produced.
UTPF For the most incredible sound possible.
ETP Great sound, even better value.
CAPACITORSHighly efficient capacitor designed to release the energy when needed with
the ability to quickly recover optimum performance and system reliability.
SUBWOOFER GRILLE 17-USG2
PART NUMBER 17-1FCAP 17-1FCAPM SURGE VOLTAGE (V) 20 20 CAPACITANCE (F) 1 1 DISTRIBUTION INPUT / OUTPUT (1)O/4awg, (1)0/4 awg (1)0/4awg, (1)0/4awg
17-ETP-25 17-ETP-21.4 7-ETP-21.6 17-ETP-YM 17-ETP-YF 2 4 6 1 1 25 21 21 0.5 0.5 Molded Molded Molded Molded Molded
17-ETP-25 17-ETP-21.4 7-ETP-21.6 17-ETP-YM 17-ETP-YF 2 4 6 1 1 25 21 21 0.5 0.5 Molded Molded Molded Molded Molded
Satin-M™ chrome metal ends
Frosted translucent jacket
Hyper twist design for the best possible noise rejection
Color matched to Memphis amplifiers
Molded color matched ends
Clear flexible PVC jacket
Twisted pair design for excellent noise rejection
Fits any diameter subwoofer from 8” to 18”.
Two pieces included in a package.
Sturdy steel protective bars
UTPF RCA’S
PART NUMBER 17-UTPF-1.5 17-UTPF-3 17-UTPF-7NUMBER OF CHANNELS 2 2 2LENGTH (ft) 1.5 3 7 ENDS Satin-M™ Satin-M™ Satin-M™
17-UTPF-17 17-UTPF-25 2 2 17 25 Satin-M™ Satin-M™
17-UTPF-21.4 17-UTPF-21.6 4 6 21 21 Satin-M™ Satin-M™
PART NUMBER 17-ETP-1.5 17-ETP-3 17-ETP-7 17-ETP-12 17-ETP-17Number of Channels 2 2 2 2 2Length (ft) 1.5 3 7 12 17Ends Molded Molded Molded Molded Molded
1FCAP - etched foil capacitor1FCAPM - etched foil capacitor with digital voltage meter
23
PART NUMBER DESCRIPTION17-MJMLP License Plate - Includes Fram & Mat17-MJMSK Speaker Kit - Two 10” x 10” sheets17-MJMVK Versa Kit - one 18: x 32” shet17-MJMDK Door Kit - Four 12” x 36” sheets17-MJMTK Trunk Kit - Five 18” x 32” sheets17-MJMBK Bulk Kit - Ten 18” x 32” sheets
MOJO MAT
ACCESSORIES Make it all Memphis
Mojo Mat