MDM6000 SATELLITE MODEM
(R1.1)
www.newtec.eu
Description
The MDM6000 Satellite Modem is the versatile next generation
modem optimised for medium to high speed IP applications
over satellite. The MDM6000 modem is typically installed at both
ends of a point-to-point satellite link or at the remote sites of a
star network. The unit can act as a modulator, demodulator or
modem depending on the network configuration and integrates
seamlessly with terrestrial IP networks and equipment. The modem
is in full compliance with the DVB-S2 standards and supports the
S2 Extensions candidates to achieve barrier-breaking efficiency at
maximum service availability.
Efficiency at the Core
The Newtec MDM6000 Satellite Modem combines a number
of innovative elements to improve current market available
efficiencies, thereby lowering the overall Total Cost of Ownership.
New modulation and Forward Error Correction (FEC) codes up to
64APSK 162/180 (which can be seen as demonstrator of possible
extensions in the DVB-S2 standard) in combination with innovative
technologies such as 72 Mbaud, Clean Channel Technology™,
Automatic Uplink Power Control (AUPC), FlexACM®, QoS, and
Automated Equalink® pre-distortion are embedded in the
modem and bring the satellite link to full efficiency. By increasing
the amount of data that can be transferred per transponder the
MDM6000 modem effectively increases business opportunities
for Service Providers.
Depending on the application, the Newtec MDM6000 modem
can be used in conjunction with the Newtec HUB6000 Satellite
Hub. In all cases end-to-end efficiency over satellite can be
achieved. The performance can be increased even more
by adding Newtec’s bandwidth cancellation and/or network
optimisation technologies such as acceleration, compression,
shaping and bandwidth management.
Optimal Availability
Newtec’s auto-adaptive technology FlexACM® is incorporated in
the MDM6000 modem and deals with fading conditions (rain, dust,
interference) and inclined orbit
satellites with varying throughput
Thanks to FlexACM® these fading
conditions will no longer interrupt
the transmission between the hub
and remote sites nor result in loss
of data. The maximum possible
throughput can be achieved at all
times. Additionally the Automatic
Uplink Power Control mechanism
can ensure maximum use of the
linkbudget at all times.
Flexibility and Scalability Matching Market’s Business Models
The MDM6000 modem provides
a scalable and flexible platform
which allows the customers
to grow depending on their
application and investment plan.
The platform can start as a modulator or demodulator unit and
grow into a modem with different functionalities by simple license
upgrades.
At the output of the MDM6000 Modem, the signal is available
in IF or extended L-band (950 MHz-2150 MHz). 24V or 48V DC
BUC Power and 10 MHz reference can be multiplexed on the
L-band modulator output via software settings. At the receive
site the modem has a dual L-band input or optional IF+L-band
input. The active input is selected by the user and can provide
DC power and frequency band selection signals compatible with
most professional and commercial LNBs providing a compact
and cost effective solution.
The Satellite Modem can be easily monitored and controlled via
a comprehensive front panel menu, advanced web GUI as well
as via SNMP protocol. This enables easy integration into any
industry- standard EMS/NMS system.
Rev.2 03/2013
The Newtec MDM6000 Satellite Modem is the versatile Next Generation modem that allows service providers and government operations to increase the amount of services or the customer base within the same bandwidth. At the same time it introduces ways to reduce OPEX costs and increase the profitability of your business at maximum efficiency and optimum availability.
Support Services for yourProfessional Equipment
Care Pack Basic and Care Pack Enhanced are the Newtec service and support packages protecting your Newtec equipment over a
three-year period.
Architecture
The MDM6000 Satellite Modem can be used at both ends of a
point-to-point network or at the remote site of a star network.
Depending on the configuration the unit can be used as
modulator, demodulator or modem.
Related Products
HUB6000 Satellite Hub
MDM 6100 Broadcast Satellite Modem
BWC0900 Bandwidth Canceller
NOP183x PEP Gateways
NOP184x PEP Servers
AZ202 Redundancy Switch
AZ7x0 Frequency Converters Portfolio
Related Bandwidth Efficiency Technologies
Clean Channel TechnologyTM
Fully Automated Equalink ®
S2 Extensions
Flex ACM
SPECIFICATIONS
Key Features
• Data rates up to 155Mbit/s bi-directional for handling new
high-speed applications and lower TCO
• Baudrates upto 72Mbaud to handle all common transponder
sizes
• Clean Channel TechnologyTM for additional bandwidth
efficiency gains by allowing optimal carrier spacing
• DVB-S2 and optional S2 Extensions (up to 64APSK) for
optimal use of allocated bandwidth
• Optional Automated Equalink® Pre-distortion for optimal use
of semi-saturated transponders
• Reduce impact of RF Interferences RFI by enabling the
optional DVB RF Carrier ID (DVB-CID)
• All modcods and baudrates default enabled for flexible and
optimal operation of the network
• Automatic Uplink Power Control for combating uplink fading
• Optional FlexACM for adaptive environments like variable
interferences from rain and dust or for inclined orbit operation
• Standard GSE encapsulation for minimal overhead
• Adaptive traffic shaping and bandwidth management allowing
maximal SLA adherence even in case of ACM
• Advanced Quality of Service (QoS) for better customer
experience
• Easy integration with terrestrial IP data networks
• Easy operation through secure frontpanel, SNMP, HTTP and
CLI interfaces
@ @
MDM6000 Satellite Modem
BWC0900 Bandwidth Canceller (Optional)
MDM6000 Satellite Modem
BWC0900 Bandwidth Canceller (Optional)
Ku-, X-, C-band, HTS &Inclined Orbit Satellite
72 MHz transponders (no bandwidth cancellation in this example)
36 MHz 36 MHz
DVB-S2/S2 Extensions FlexACM Outbound
DVB-S2/S2 Extensions FlexACM Return
Figure 2: Point-to-Multipoint network with MDM6000 in remote
Figure 2: Point-to-Point network for medium/(very)high speeds
Z
@BackboneAccess
Remote 1: MDM6000 Satellite Modem
Remote 2: MDM6000 Satellite Modem
Remote 3: MDM6000 Satellite Modem
Remote Network
HUB6000 Satellite Hub
DVB-S2/S2 Extensions
Ku-, Ka-, X-, C-band,Inclined Orbit Satellite
Acceleration and Compression Option
S2/S2 Extensions MultiCarrierDemod
72 MHz
DVB-S2/S2 Extensions ACM Outbound
S2/S2 Extensions ACMReturns
36 MHz
MDM6000 SATELLITE MODEM
www.newtec.eu
Input Interfaces• Auto switching 10/100/1000 Base-T Ethernet
interfaces• Maximum rates: 155 Mbit/s in each direction• Layer 3 static router function: IPv4 packets over
satellite• Up to 100 IP routes• Advanced QoS features Adaptive Traffic Shaping according to PIR/CIR Flexible traffic classification• DVB-GSE Encapsulation/Decapsulation of IP
frames in DVB-S2 & S2 Extensions• Data filtering (downlink): Up to 64 ISI filters
Modulation and DemodulationSUPPORTED MODULATION SCHEMES AND FEC
• DVB-S2 Outer/Inner FEC: BCH/ LDPC MODCODs: QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4,
4/5, 5/6, 8/9, 9/10; 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10; 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10; 32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
• S2 Extensions (optional): Outer/Inner FEC: BCH/ LDPC MODCODs QPSK: 45/180, 60/180, 72/180, 80/180,
90/180, 100/180, 108/180, 14/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
8PSK: 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180
16APSK: 80/180, 90/180, 100/180, 108/180, 114/180, 120/180,
126/180, 135/180, 144/180, 150/180, 160/180, 162/180
32APSK: 100/180, 108/180, 114/180, 120/180, 126/180,135/180, 144/180, 150/180, 160/180, 162/180
64APSK: 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
Linear MODCODs: 8PSK-L: 80/180, 90/180, 100/180,
108/180, 114/180, 120/180 16APSK-L: 80/180, 190/180, 100/180,
108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
64APSK-L: 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
• FlexACM controller (optional)• FlexACM client embedded in MDM6000
modem (optional)• Automatic Uplink Power Control
BAUD RATE RANGE• Modulator: 0,050 - 72MBaud• Class 1 Demodulator: 1 - 60Mbaud
(depending on MODCOD) • Class 2 Demodulator: 1 - 72Mbaud
(depending on MODCOD)
FRAME LENGTH• DVB-S2 Short Frames 16200 bits• DVB-S2 Normal Frames 64800 bits• S2 Extensions Normal Frames 64800 bits
CLEAN CHANNEL TECHNOLOGYTM • Roll-off : 5% -10% -15% -20% - 25% - 35%• Optimum carrier spacing• Advanced filter technology
CARRIER INTERFERENCE REDUCTION• DVB RF Carrier ID (DVB-CID)• Spread Spectrum Modulator (BPSK)• Supports User Data• Compliant to DVB Standard
Modulation InterfacesL-BAND
• Connector N(F), 50 ohms (optional SMA adapter)
• Frequency 950 - 2150 MHz (10 Hz steps)• Level -35/+7 dBm (+/- 2dB)• Return loss > 14 dB• Switchable 10MHz Reference• Spurious performance Better than - 65 dBc/4kHz @ +5 dBm output
level and > 256kBaud Non-signal related: < - 80 dBc @ +5 dBm
output
IF-BAND (CONFIGURATION OPTION)• Connector BNC (F) - 75 ohms (intermateable with 50 ohms)• Frequency 50 - 180 MHz (10 Hz steps)• Level -35/+10 dBm (± 2 dB)• Return loss 50 ohms : > 14 dB 75 ohms : > 20 dB• Spurious performance Better than - 65 dBc/4kHz @ +5 dBm output
level and > 256kBaud Non-signal related:< - 80 dBc @ +5 dBm output
L-BAND MONITORING• Connector SMA (F), 50 ohms• Frequency Same as L-Band output
frequency or 1050 MHz in case of IF output option only
• Level -45 dBm• Return loss > 10 dB
10 MHZ REFERENCE OUTPUT (OPTIONAL)• Connector BNC (F), 50 ohms• Output level +3 dBm (+/- 2dB)
BUC POWER (OPTIONAL)• Max. current: 3.8A• Voltage: 24V, 48V (Software controlled)
Demodulation Interfaces DUAL L-BAND INPUT (DEFAULT)
• Connector 2 x F-type (F), 75 Ohms • Return loss > 7 dB (75 Ohm – F(F)) • Level -65/-25dBm • Frequency 950 - 2150 MHz • Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
IF-BAND INPUT (OPTIONAL, REPLACES ONE L-BAND INPUT)
• Connector BNC (F) - 75 ohms • Return loss > 15 dB • Level - 55 to -15 dBm • Frequency 50 - 180 MHz • Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
LNB POWER AND CONTROL • max. current 350 mA (on selected IFL input) • voltage 11,5 -14 V (Vertical polarization) 16 -19 V (Horizontal polarization) & additional 22 kHz +/- 4KHz (band selection according
to universal LNB for Astra satellites & DiSEqC command transmission)
Internal 10 MHz Reference FrequencySTANDARD STABILITY
• Stability: +/- 2000 ppb over 0 to 70° C• Ageing: +/- 1000 ppb/year
VERY HIGH STABILITY (OPTIONAL)• Stability: +/- 2 ppb over 0 to 65°C• Ageing: +/- 500 ppb/10year
GenericMONITOR AND CONTROL INTERFACES
• M&C connectivity via separate Ethernet links• Web server GUI (HTTP) via web browser• Diagnostics report, alarm log (HTTP)• SNMP v2c
ALARM INTERFACE• Electrical dual contact closure alarm contacts• Connector 9-pin sub-D (F)• Logical interface and general device alarm
Physical• Height 1RU, width: 19”, depth 51 cm, 5.8 kg• Power supply: 90-130 & 180-260 Vac, 105 VA, 47-63 Hz• Temperature: Operational: 0°C to +50°C / +32°F to +122°F Storage: -40° to +70°C / -40°F to +158°F• Humidity: 5% to 85% non-condensing• CE label and UL (pending)
Figure 2: Point-to-Multipoint network with MDM6000 in remote
Figure 2: Point-to-Point network for medium/(very)high speeds
Newtec MDM6000 Satellite Modem Release 1.1. Ordering n°Configuration OptionsCategory MDM6000
Select 1 optionHardware Platform Chassis Version 03 (Modem) CH-03
Select 1 optionOperating Software MDM6000 Major Software version R1* MS-11
Select 1 option
Efficiency Optimization
Package
DVB-S2, CCT, AUPC* OP-02
S2 Ext, DVB-S2, CCT, AUPC* OP-03
For a modem or demodulator, select 1 optionDemodulator
HardwareClass 1 (S2)* DH-01Class 2 (S2+S2 Extensions+WideBand) DH-02
For a modem or demodulator, select 1 optionDemodulator Input
InterfaceRedundant L-band IU-00Selectable IF or L-band ** IU-01
For a modem or modulator, select 1 option
Modulator Output Interface
L-band with switchable 10MHz output* OU-00L-band + 10MHz output + 24/48V BUC** OU-05IF (50-180 MHz)* OU-01IF+ L-band with switchable 10 MHz out* OU-02IF+L-band + 10MHz output + 24/48V BUC** OU-06
Select 1 optionInternal Reference
ClockStandard 10 MHz IR-00Very High Stability 10 MHz IR-02
Select max 1 optionReference Clock
Output 10 MHz Reference Output (BNC) RO-01
Select 1 optionMains Power Supply Unit
PSU Single AC 110/240V PS-00PSU Dual Redundant AC 110/240V PS-01
For a modem or modulator, select 1 optionOutbound Rates Outbound Rate* 1 - 380 Mbit/s
For a modem or demodulator, select 1 optionInbound rates Inbound Rate* 1 - 380 Mbit/s
Additional OptionsCategory
Select max 1 optionOutbound ACM Tx FlexACM PointToPoint * 1-380 Mbit/s
Select max 1 optionInbound ACM RX FlexACM Client* 1-380 Mbit/s
Select max 1 option
DVB Carrier Identifier DVB RF carrier identifier* ID-01
Select max 1 option
Pre-Distortion Automated Equalink® * AE-01
Select max 1 optionModulator Output
Connector L-Band output N to SMA output adapter OU-10
ServicesCategory
Select max 1 option
SupportCare Pack 3 Basic GA-08
Care Pack 3 Enhanced GA-09
ORDERING INFO
Europe North-America South-America Asia-Pacific China MENA
Tel: +32 3 780 65 00 Tel: +1 203 323-0042 Tel: +55 11 2092 6220 Tel: +65 6777 22 08 Tel: +86 10-823 18 730 Tel: +971 4 390 18 78
Fax: +32 3 780 65 49 Fax: +1 203 323-8406 Fax: +55 11 2093 3756 Fax: +65 6777 08 87 Fax: +86 10-823 18 731 Fax: +971 4 368 67 68
Shaping the Future of Satellite Communications
MDM6000SATELLITE MODEM
(*) Selectable via license key(**) Option IU-01 is mutually exclusive with options OU-05 and OU-06Contact your sales representative for details ([email protected]).