May 9, 2006
OfficeServ 7000 SeriesData Basic Course
Technical Training CourseSamsung Telecommunications America
BCS – Training Group
2
OS 7000 Series ClassOS 7000 Series Class
Course Outline
• Hardware Description and Function
• Configuration
• Data Services Overview
• Programming Access for Data Modules
• Test
3
Hardware:
Data Modules for OfficeServ 7200 and 7400
4
Hardware Description and Function
Common Data Modules for the
OS 7000 Series
5
LIM (LAN Interface Module)LIM (LAN Interface Module)
• 16 ports
• 10/100 Base-T auto sensing full/half-duplex auto-sensing LAN ports
• VLAN (802.1Q) function for QoS
• Switching Hub function
• Installed in any slot
6
PLIM (PoE LAN Interface Module)PLIM (PoE LAN Interface Module)
• 16 ports
• 10/100 Base-T auto sensing full/half-duplex auto-sensing LAN ports
• Power over Ethernet (PoE), provides 48V~54V power to ITP keysets or the SMT-R2000 AP
• VLAN (802.1Q) function for QoS
• Switching Hub function
• Installed in any slot
7
OS 7150OS 7150
• Provides additional power for use with the PLIM and GPLIM cards
• Supports 2 PSU cards
8
OfficeServ 7200 Specific HardwareOfficeServ 7200 Specific Hardware
9
WIM (WAN Interface Module)WIM (WAN Interface Module)
• 1 per system – installed in slot 1 of either cabinet of the OS 7200
• 3 WAN interfaces
• Routing Functions: Static Routing, Dynamic Routing (RIP, OSPF), Inter-VLAN routing, Multicast IGMP
• Network Functions: NAT/NAPT, Firewall, IDS, VPN, QoS
• Provides a managed switch function when a LIM or PLIM is installed in the next slot (slot 2)
10
Eth 1 Eth 2
Eth 0 Eth 3 SIO SERIAL
WIM1 2 3 4 9 10 11 12
5 6 7 8 13 14 15 16
LIMMail Server
(WEB Server)
Internal Connection (10/100Base-Tx)
Internet
DSLAM
10/100Base-Tx
Office PC
Console
RS232C10Base-T
ADSL/VDSL/Cable Modem
10/100Base-Tx
DSU/CSU
V.35
Edge Router
OfficeServ 7200 Configuration
WIM LIM / PLIM
11
OS 7200 Data Module CapacityOS 7200 Data Module Capacity
• 8 LIM per System• 4 per cabinet slots 2 - 5• 128 ports max with 16 of which are managed
L2 Switch
• 1 WIM per System
Router
• Basic Power - PLIM * 1 = 16 ports
PoE
12
OfficeServ 7400 SpecificOfficeServ 7400 Specific
13
GWIMGWIM
• Installed in any slot of any OS 7400 cabinet
• One per cabinet (3 per system)
• Routing between WAN and LAN
• Multi WAN ports for leased lines, xDSL or cable modem
• VPN, QoS and Firewall functions
Ports for Connecting:
• T1 (V35)
• T3 (HSSI)
• 1000 Base-FX/SX/LX/TX GbE
• SIO (RS-232 Programming)
14
GWIMSGWIMS
• Required for Site-to-Site VPN tunnels
• 64 bit, 66MHz PCI bus Interface• IPSEC, PPTP, L2PP, PPP, IKE• Symmetric key encryption
(DES, Triple DES, RC4)• Authentication (SHA-1, MD5)• Compression (LZS, MPPC)• Public key processing unit• Random Number Generator
15
GWIM default IP addressesGWIM default IP addresses
10.0.0.1/24 10.0.1.1/24 10.0.2.1/24
IE ver 6.0 or higher required for GWIM programming access and using port # 3
16
GWIMGWIM
Point IE to 10.0.2.1 (port 3) to open this window for the GWIM
admin
root
17
18
19
GWIMSGWIMS
20
GSIMGSIM
• Installed in any slot
• 2 per cabinet (6 total in 3 cabinets)
• 10 ports of 1000 Base-SX/LX/TX ports
• Ethernet Switch (802.3 compatible)
• VLAN Networking (802.1q)
• Diffserv
21
GSIM default IP addressGSIM default IP address
10.0.3.1/24
IE ver 6.0 or higher required for GSIM programming access and using any port
22
GSIMGSIM
admin
root
Point IE to 10.0.3.1 to open this window for the GSIM
23
24
25
GPLIMGPLIM
• 12 ports of 10/100 Base-T Full/Half duplex auto-sensing ports
• 2 ports of 1000 Base-TX/SX/LX GbE ports, uplink LAN interface
• L2 Ethernet Switching
• VLAN Networking (802.1q)
• Packet Priority Control (802.1p)
• Flow Control (802.3x)
• Multi-Casting (IGMP Snooping)
• IEEE 802.3af Power over Ethernet (PoE)
26
GPLIM default IP addressGPLIM default IP address
10.0.4.1/24
IE ver 6.0 or higher required for GPLIM programming access and using any port
27
GPLIMGPLIM
admin
admin
Point IE to 10.0.4.1 to open this window for the GPLIM
28
29
30
OfficeServ 7400 Configuration
eth0 eth1
eth2Router
Internet(WAN)
L3 Switch
L2Switch
전화
전화
전화
전화
GWIM
GSIM
GPLIM
10/100Mbps 1000Mbps RJ-45 console
V.35
HSSI
GSIM
GPLIMGPLIM
GPLIM
T3/E3T1/E1
31
OS 7400 Data Module CapacityOS 7400 Data Module Capacity
• 11 GPLIM per Cabinet• Max.: GPLIM * 33(or 32)• 462 ports (448 ports) - including Giga ports
L2 Switch
• 11 LIM per Cabinet• Max.: LIM * 33 (or 32)• 528 ports (512 ports)
L2 Switch
• 2 GSIM per Cabinet• Max.: GSIM * 6• 60 ports
L3 Switch
• 1 GWIM per Cabinet • Max.: GWIM * 3
Router
• Basic Power - GPLIM * 4 = 48 ports - PLIM * 3 = 48 ports
• with extended 1 power module - GPLIM * 8 = 96 ports - PLIM * 6 = 96 ports
• with extended 2 power module - GPLIM * 11 = 132 ports - PLIM * 11 = 176 ports
PoE
32
Data Services Overview
OfficeServ 7200
and
OfficeServ 7400
33
Switch (10/100M)
Call server Router
G.S
F.S F.S F.S
F.S F.S
F.S
F.S F.S F.S
F.S F.S
※ G.S = Switch (Gigabit) F.S = Switch (10/100M)
G.S F.S F.S
OfficeServ Enterprise
OfficeServ Enterprise
OfficeServ Enterprise Switch (10/100M)
Switch (10/100M) Switch (10/100M)
Switch (10/100M) Switch (10/100M)
IP PhoneWorkstation Server
전화 전화 전화
전화 전화 전화
전화 전화 전화
전화 전화 전화
IP PhoneWorkstation
WAN (CSU / DSU)
전화 전화 전화
전화 전화전화
IP PhoneWorkstationWorkstation
Part A Part B
IP Phone
Third
Second
First Floor
Switch (Gigabit)
Switch (Gigabit)
WAN (xDSL/CABLE)
OfficeServ 7400 Network Configuration
Switch (10/100M) Switch (10/100M)
34
Category OfficeServ 7200 OfficeServ 7400 Difference
Feature
IP Key Phone +
(FE Router, 10/100 Switch, Security , IP Telephony,
Wireless)
IP Key Phone +
(Giga Router, 10/100/1000 Switch, Security, IP Telephony,
Wireless)
Router/L2 FE Vs
Router/L3 GbE/L2 FE
System Performance
50 Kpps Routing(WIM)
1.6~12.8 Gbps Switching
360 Kpps Routing (GWIM)
3.2 ~ 165Gbps(GbE S) Switching
OS7200(2 Rack)
LIM: 1.6Gbpa * 4ea * 2
OS7400(3 Rack)
GSIM: 10Gbps * 2ea * 3
GPLIM:3.2Gbps * 11ea *3
VPN100 Tunnel Support
50 Sessions / 1 Tunnel1024 Tunnel Support
OS7200: Hifn7951
OS7400: Cavium CN1120
Bench Marking IP PBX, IP-Key phone Product
Avaya, Alcatel, Cisco CM
IP PBX, IP-Key phone Product
Avaya, Alcatel, Cisco CM
Multi Service S/R Vs
Multi Service All-In-One System
OS7200 vs OS7400
35
Feature OS7200 OS7400
CPU MPC 8250 300Mhz IBM 750GX 1Ghz(Router)
MPC8247 400Mhz(GbE S)
MPC852 100Mhz(FE S)
Switching Capacity Basic 1.6Gbps
Max. 12.8Gbps (LIM: 8ea)
Basic 10Gbps (GSIM)
Basic 3.2Gbps (GPLIM)
Max. 165Gbps (GSIM 6ea, GPLIM 33ea)
Routing Performance 50 Kpps 360 Kpps(64Bytes)
Max. VLAN Group 255 255(GPLIM)
4,095 (GSIM)
Ethernet Switch 10/100 Support 1000 TX/SX/LX
10/100 Fast Ethernet, PoE
T1/E1 1 1
T3/E3 - 1
WAN 2 3
Application Service . IP Telephony
(H323, SIP, Proprietary)
. K/P, UMS, Data All-In-One System
. SIP-ALG
. IP Telephony
(H323, SIP, Proprietary)
. Load Balancing
. Transparent Fail Over
. SIP-ALG
OS7200 vs OS7400
36
Features OS7200(v1.1x) OS7200(v1.2x) OS7400
Switching
Features
L2 Switch,
STP,
Port mirroring,
802.3x, 802.3af
(Zebra)
L2 Switch, STP, RSTP
802.3ad/LACP
Port mirroring
802.3x, 802.3af
(IP Infusion, ZebOS)
L2/L3 Switch, STP, RSTP
802.3ad/LACP
Port mirroring
802.3x, 802.3af
(IP Infusion, ZebOS)
Routing Features
RIPv1/v2, OSPFv2
PPP, FR, HDLC
(Zebra)
RIPv1/v2, OSPFv2,
PPP, FR, HDLC
(ZebOS)
RIPv1/v2, OSPFv2, BGPv4
PPP, FR, HDLC
(ZebOS)
Multicast IGMP Snooping PIM-SM, DVMRP, IGMPv2,
IGMP Snooping
PIM-SM, DVMRP, IGMPv2, IGMP Snooping
VLAN MAC / Port based VLAN MAC/Port/Tag(802.1q) MAC/Port/Tag(802.1q), Protocol,
IP Subnet Based VLAN, GARP, GVRP
QoS 802.1p Priority,
Level Configuration,
HTBQ/BoD, SPQ
VoIP QoS
802.1p Priority,
Level Configuration,
HTBQ/BoD, SPQ
VoIP QoS
802.1p Priority,
Level Configuration,
HTBQ/BoD, SPQ,
GSIM L3 QoS: DiffServ, VoIP QoS, Marker, Classification, Congestion Management, Re-
mapping
Security Firewall/IDS/IPS/NATPT,
VPN (IPSec, PPTP)
Authentication PAP/CHAP, VLAN
ACLs
Firewall/IDS/IPS/NATPT,
VPN (IPSec, L2TP, PPTP)
Authentication PAP/CHAP, VLAN
ACLs
Firewall/IDS/IPS/NATPT,
VPN (IPSec, L2TP, PPTP)
Authentication PAP/CHAP, VLAN
ACLs
Management Web CLI, SNMPv1/2/3, 4RMON,
Secure Web-based
CLI, SNMPv1/2/3, 4RMON,
Secure Web-based
OS7200 vs OS7400
37
GWIMGWIM
Router Functions:• Path Management and queuing of data packets for external WAN
and internal LAN• Static and Dynamic routing – RIPv1, RIPv2, OSPFv2 (Open
Shortest Path First), BGP4 (Border Gatweay Protocol 4) protocols• DHCP (Dynamic Host Configuration Protocol) with PPPoE (Point-to-
Point Protocol over Ethernet) client function in Ethernet WAN interface
• Encapsulation function of HDLC, PPP and Frame Relay in Serial WAN interface
• Support of IP multicast – IGMPv1 (Internet Group Management Protocol) and IGMPv2
protocolsDVMRP (Distance Vector Multicast Routing Protocol)PIM-SM (Protocol Independent Multicast-Sparse Mode)
• NLB (Network Load Balance)
38
GWIM cont.GWIM cont.
Data Network Security Functions• Inbound and Outbound NAT (Network Address Translation) / PT
(Protocol Translation) function• Firewall – access control from the outside by Extended Access List• IDS (Intrusion Detection System) function –
Detection and report of access for the access control area by the access list
Recognition and notification of illegal packets by applying the basic intrusion rule for packets
Detection and block of DoS attack such as SYN Flood• VPN (Virtual Private Network) function –
VPN Gateway function based on PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol) and IPSec (Internet Protocol Security protocol
Confidentiality and integrity functions via VPN tunneling and data encryption
39
GWIM cont.GWIM cont.
Data Network Application Functions• Data network application functions such as NAT/PT, firewall, VPN,
DHCP and Application Level Gateway (ALG)ALG function
support to operate the security function and smoothly pass VoIP packets by implementing the ALG function for signaling and media traffic
DHCP Server functionauto-configuration of the network environment for the IP
equipment in another functional block of the OS systemDHCP Relay function
to connect the IP equipment in another block of the OS system to external DHCP server for the auto-configuration of the network environment
40
GWIM cont.GWIM cont.
QoS Functions• Priority queuing process for layer 3 packets and for a specified IP
• Priority queuing process for layer 4 packets and RTP packets (UDP/TCP port)
41
GWIM cont.GWIM cont.
Management Functions• Advanced debugging function via Telnet connection
• Configuration and verification for the operations of the GWIM functional block via a browser or the SNMP (Simple Network Management Protocol)
• 4RMON (4 Real-time Monitoring) function
• Program upgrade via TFTP, HTTP or a local manager’s PC
42
GSIMGSIM
Switch Functions• L2 / L3 Switch function
• Jumbo Packet (9216 byte) Support
• Managed switch function by using access interface for LAN
• Learning Bridge function using Spanning-Tree algorithm
• Layer2 Frame Priority function by 802.1p
• 802.3x Layer 2 Flow Control
• Packet Mirroring
• VLAN (port and 802.1Q tag)
• VLAN classification – MAC based / IP based / protocol based
• Ingress filtering for 802.1q VLAN Security
• Dynamic VLAN Management via GARP VLAN Registration Protocol (GVRP)
• IP Multicasting Relay support (IGMP Snooping function)
• Load Sharing for Link Aggregation Control Protocol (LACP) / Port Trunking
43
GSIM cont.GSIM cont.
Router Functions• Path management and queuing of data packets for external WAN
and internal LAN
• Static and Dynamic routing – RIPv1, RIPv2, OSPFv2 and BGP4 protocols
• DHCP in Ethernet WAN interface
• Support of IP multicast –
IGMPv1 (Internet Group Management Protocol) and IGMPv2 protocols
DVMRP (Distance Vector Multicast Routing Protocol)
PIM-SM (Protocol Independent Multicast-Sparse Mode)
44
GSIM cont.GSIM cont.
Data Network Application Functions• DHCP Server – auto-set of network environment for IP equipment in
the OS 7400 system
• DHCP Relay - connection of IP equipment in the OS 7400 to an external DHCP server to enable to auto-set the network environment
45
GSIM cont.GSIM cont.
QoS Functions• Priority process for Layer 2 frame under 802.1p standard
• Priority queuing process for Layer 3 packets and priority queuing for a specified IP
• Priority queuing process for Layer 4 packets and priority for Real-time Transport Protocol (RTP) packets (UDP/TCP port)
46
GSIM cont.GSIM cont.
Management Functions• Advanced debugging function via Telnet connection
• Configuration and verification for the operations of the GSIM functional block via a browser or the SNMP (Simple Network Management Protocol)
• 4RMON (4 Real-time Monitoring) function
• System monitoring and management via the system log function
• System synchronization function via Network Time Protocol (NTP)
• Program upgrade via TFTP, HTTP or a local manager’s PC
47
GPLIMGPLIM
Ethernet Switch Functions• Fast Ethernet L2 switch module
• Managed switch function
• Support of multicasting relay (IGMP snooping function)
• Learning bridge function by spanning-tree algorithm
• VLAN based on ports, tags, protocols or MAC addresses
• Uplink fail over function by 4-port/3-group port trunk
• Layer 2 frame priority function by 802.1p
• 802.3x layer 2 flow control
• Network Access Control function based on ports by 802.1x
48
GPLIM cont.GPLIM cont.
Power over Ethernet (PoE) Functions• Power supply function via Ethernet cable without additional power
source
• Managed function in accordance with ports
• Function to confirm the status of current and to restrict the supply of the current
• Enable/disable function for supplying power
• Based on PSU and SEPU units available
49
GPLIMcont.GPLIMcont.
Management Functions• Advanced debugging function via Telnet connection
• Configuration and verification for the operations of the GPLIM functional block via a browser or the SNMP (Simple Network Management Protocol)
• 4RMON (4 Real-time Monitoring) function
• Program upgrade via TFTP, HTTP or a local manager’s PC
50
OS 7000 Series Data Basic CourseOS 7000 Series Data Basic Course
Thank you for attending the
OfficeServ 7000 Series Data Basic Course