MATERIALS AND QUALITY ASSURANCE
23/24 MAY 2019 Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS Dresden/Germany
VGB Workshop
WITH UPDATED PROGRAMME!
5TH INTERNATIONAL VGB WORKSHOP MATERIALS AND QUALITY ASSURANCE 2019 The 5th International VGB Workshop "Materials and Quality Assurance" takes place in Dresden hosted by Fraunhofer IWS. Aim of the workshop is to permit results of advanced materials, welding and quality assurance aspects. The main topics are:
Lifetime Assessment, Flexibility l Materials and Components l Modern Welding Technologies, Additive Manufacturing l Quality Assurance, Damages I Renewable Energy
The workshop is aimed at manufacturers, planners, operators, insurers and experts interested in technology and its environment, researcher, authorities and associations. We look forward to seeing you in Dresden/Germany.
PROGRAMME (Subject to change) THURSDAY, 23 MAY 2019 08:00 Registration, Welcome-Coffee 09:00 Opening
Dr. J. Standfuß, Fraunhofer IWS, Dresden/Germany
Section I: Lifetime Assessment, Flexibility Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany 09:15 V1
Impact of Changing Markets on Both Operational Behaviour and Component Integrity Dr. C. Wignall, Uniper Technologies Limited, Nottingham/UK
09:40 V2
Fatigue monitoring of a boiler recirculation pump Dr. T. Müller, KSB SE & Co. KGaA, Frankenthal/Germany, Dr. K. Metzger, Grosskraftwerk Mannheim AG, Mannheim/Germany, S. Bergholz, Framatome GmbH, Erlangen/Germany, and F. Silber, MPA Stuttgart/Germany
10:05 V3
Life assessment, maintenance and repair of welded joints of pipings at high temperatures M.Sc. R. Pohja, Lic.Tech. S. Tuurna, D.Sc. T. Hakala, D.Sc. A. Laukkanen, D.Sc. T. Andersson and M.Sc. P. Auerkari, VTT Technical Research Center of Finland Ltd., Tampere/Finland
10:30 Coffee break 11:00 V4
Probabilistic Creep-Fatigue Lifetimes Assessment Approach: An Example Application F. Kölzow, Technische Universität Darmstadt, Darmstadt/Germany, Dr. K. Helbig, GE Power AG, Mannheim/Germany, Dr. C. Kontermann and Prof. M. Oechsner, Technische Universität Darmstadt, Darmstadt/Germany
Section II: Materials and Components Moderator: C. Ullrich, VGB, Essen/Germany 11:25 V05
Creep Life Assessment for Welded Joint of P91 Steel Considering Material Properties of Each Pipe Used at Power Plant Dr. M. Yaguchi, Central Research Institute of Electric Power Industry, Yokosuka/Japan
11:50 V06
Challenges of Creep Rupture Data Assessments using the example of a large dataset of Grade P91 Dr. M. Schwienheer, Technische Universität Darmstadt, Darmstadt/Germany
12:15 V07
Development of Boiler Material Technology and the Verification of its Practical Applicability in Japanese National A-USC Project Dr. T. Tokairin, Mitsubishi Hitachi Power Systems Ltd., Hiroshima/Japan and M. Kitamura, Mitsubishi Hitachi Power Systems Ltd., Yokohama/Japan
12:40 V08
Super VM12 - The new 12%Cr steel for high-temperature applications Dr. M. Subanović, Dr.rer.nat. J. Pirón, M. Jarrar, A. Gauss and Dr.rer.nat. André Schneider, Vallourec Deutschland GmbH, Düsseldorf/Germany
13:05 Lunch break Section III: Quality Assurance, Damages Moderator: Dr. G. Maier, Fraunhofer IWM, Freiburg/Germany 14:00 V09
Non-Destructive Weld Inspection during the Welding Process – Possibilities and Limitations of an Inline Monitoring Approach Dr. F. Schubert, Dr. B. Bendjus, Dr. U. Cikalova, M. Stephan, R. Hipp, E. Schulze, M. Barth and Z. Bor, Fraunhofer IKTS, Dresden/Germany
14:25 V10
Depth sizing methods of operation induced flaws with automated phased array ultrasonic inspections A. Marx and S. Medenbach, MuM Müller and Medenbach GmbH, Gladbeck/Essen
14:50 V11
T24-Challanges of the repair of service exposed membrane walls Dr. C. Ullrich1, T. Hauke2 and P. Körner1 1 VGB PowerTech Service GmbH, Essen/Germany 2 Lausitz Energie Kraftwerke AG, Cottbus/Germany
15:15 Coffee break 15:45 V12
Recent Damage Evaluations on Austenitic Boiler Tubes associated with Supercritical Plant Dr. S. Heckmann, RWE Power AG, Essen/Germany
16:10 V13
Forced Draft Fan Damages and Premature Fatigue Fractures in Cold Air Suction Ducts Dr. F. Unterumsberger, Mitsubishi Hitachi Power Systems Europe GmbH, Duisburg/Germany
16:35 V14
Remaining lifetime assessment of expansion joints in district heating grid P. Buhl, R. Nothdurft, EnBW Energie Baden-Württemberg AG, Stuttgart/Germany
18:45 Evening event at the ship “Salonschiff MS Gräfin Cosel” Riverboattrip, International Dixieland Festival, Fireworks hosted by KSB SE & Co. KGaA, Frankenthal/Germany
FRIDAY, 24 MAY 2019
Section IV: Renewable Energy Moderator: Dr. S. Heckmann, RWE Power AG, Essen/Germany 08:30 V15
Damage Experiences in Solar Thermal Power Plants Dr. B. Persigehl, Dr. J. Stoiber and R. Weber, Allianz Risk Consulting GmbH, Munich/Germany
08:55 V16
Offshore Wind Energy – Steel Structures Dr. S. Weise and S. Dörfeldt, OWT GmbH, Leer/Germany
09:20 V17
Lessons Learned from damages of mechanical drive trains of wind turbines Dr. T. Griggel and T. Gellermann, Allianz Risk Consulting GmbH, Munich/Germany
09:45 Coffee break Section V: Welding Technologies, Additive Manufacturing Moderator: Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany 10:15 V18
Laser-Multi-Pass Narrow-Gap Welding of Thick-Walled High Temperature Materials – 140 mm thick Alloy 617 occ B. Keßler, Dr. D. Dittrich, Prof. B. Brenner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
10.35 V19
Microstructure and Fatigue Behavior of Laser Welded Alloy 617 occ Prof. M. Zimmermann, Dr. J. Kaspar, R. Kühne and Prof. Brenner, Fraunhofer IWS, Dresden/Germany
10:55 V20
Advanced concepts for design life and residual life assessment of welded components under flexible operation applied on Alloy 617occ. Dr. G. Maier, Dr. I. Varfolomeev and H. Oesterlin, Fraunhofer IWM, Freiburg/Germany
11:15 V21
Additive Manufacturing of powdery Ni-based Superalloys for Advanced Application J. Moritz, Dr. E. Lopez, A. Seidel, M. Riede, F. Brückner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
5TH INTERNATIONAL VGB WORKSHOP MATERIALS AND QUALITY ASSURANCE 2019 The 5th International VGB Workshop "Materials and Quality Assurance" takes place in Dresden hosted by Fraunhofer IWS. Aim of the workshop is to permit results of advanced materials, welding and quality assurance aspects. The main topics are:
Lifetime Assessment, Flexibility l Materials and Components l Modern Welding Technologies, Additive Manufacturing l Quality Assurance, Damages I Renewable Energy
The workshop is aimed at manufacturers, planners, operators, insurers and experts interested in technology and its environment, researcher, authorities and associations. We look forward to seeing you in Dresden/Germany.
PROGRAMME (Subject to change) THURSDAY, 23 MAY 2019 08:00 Registration, Welcome-Coffee 09:00 Opening
Dr. J. Standfuß, Fraunhofer IWS, Dresden/Germany
Section I: Lifetime Assessment, Flexibility Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany 09:15 V1
Impact of Changing Markets on Both Operational Behaviour and Component Integrity Dr. C. Wignall, Uniper Technologies Limited, Nottingham/UK
09:40 V2
Fatigue monitoring of a boiler recirculation pump Dr. T. Müller, KSB SE & Co. KGaA, Frankenthal/Germany, Dr. K. Metzger, Grosskraftwerk Mannheim AG, Mannheim/Germany, S. Bergholz, Framatome GmbH, Erlangen/Germany, and F. Silber, MPA Stuttgart/Germany
10:05 V3
Life assessment, maintenance and repair of welded joints of pipings at high temperatures M.Sc. R. Pohja, Lic.Tech. S. Tuurna, D.Sc. T. Hakala, D.Sc. A. Laukkanen, D.Sc. T. Andersson and M.Sc. P. Auerkari, VTT Technical Research Center of Finland Ltd., Tampere/Finland
10:30 Coffee break 11:00 V4
Probabilistic Creep-Fatigue Lifetimes Assessment Approach: An Example Application F. Kölzow, Technische Universität Darmstadt, Darmstadt/Germany, Dr. K. Helbig, GE Power AG, Mannheim/Germany, Dr. C. Kontermann and Prof. M. Oechsner, Technische Universität Darmstadt, Darmstadt/Germany
Section II: Materials and Components Moderator: C. Ullrich, VGB, Essen/Germany 11:25 V05
Creep Life Assessment for Welded Joint of P91 Steel Considering Material Properties of Each Pipe Used at Power Plant Dr. M. Yaguchi, Central Research Institute of Electric Power Industry, Yokosuka/Japan
11:50 V06
Challenges of Creep Rupture Data Assessments using the example of a large dataset of Grade P91 Dr. M. Schwienheer, Technische Universität Darmstadt, Darmstadt/Germany
12:15 V07
Development of Boiler Material Technology and the Verification of its Practical Applicability in Japanese National A-USC Project Dr. T. Tokairin, Mitsubishi Hitachi Power Systems Ltd., Hiroshima/Japan and M. Kitamura, Mitsubishi Hitachi Power Systems Ltd., Yokohama/Japan
12:40 V08
Super VM12 - The new 12%Cr steel for high-temperature applications Dr. M. Subanović, Dr.rer.nat. J. Pirón, M. Jarrar, A. Gauss and Dr.rer.nat. André Schneider, Vallourec Deutschland GmbH, Düsseldorf/Germany
13:05 Lunch break Section III: Quality Assurance, Damages Moderator: Dr. G. Maier, Fraunhofer IWM, Freiburg/Germany 14:00 V09
Non-Destructive Weld Inspection during the Welding Process – Possibilities and Limitations of an Inline Monitoring Approach Dr. F. Schubert, Dr. B. Bendjus, Dr. U. Cikalova, M. Stephan, R. Hipp, E. Schulze, M. Barth and Z. Bor, Fraunhofer IKTS, Dresden/Germany
14:25 V10
Depth sizing methods of operation induced flaws with automated phased array ultrasonic inspections A. Marx and S. Medenbach, MuM Müller and Medenbach GmbH, Gladbeck/Essen
14:50 V11
T24-Challanges of the repair of service exposed membrane walls Dr. C. Ullrich1, T. Hauke2 and P. Körner1 1 VGB PowerTech Service GmbH, Essen/Germany 2 Lausitz Energie Kraftwerke AG, Cottbus/Germany
15:15 Coffee break 15:45 V12
Recent Damage Evaluations on Austenitic Boiler Tubes associated with Supercritical Plant Dr. S. Heckmann, RWE Power AG, Essen/Germany
16:10 V13
Forced Draft Fan Damages and Premature Fatigue Fractures in Cold Air Suction Ducts Dr. F. Unterumsberger, Mitsubishi Hitachi Power Systems Europe GmbH, Duisburg/Germany
16:35 V14
Remaining lifetime assessment of expansion joints in district heating grid P. Buhl, R. Nothdurft, EnBW Energie Baden-Württemberg AG, Stuttgart/Germany
18:45 Evening event at the ship “Salonschiff MS Gräfin Cosel” Riverboattrip, International Dixieland Festival, Fireworks hosted by KSB SE & Co. KGaA, Frankenthal/Germany
FRIDAY, 24 MAY 2019
Section IV: Renewable Energy Moderator: Dr. S. Heckmann, RWE Power AG, Essen/Germany 08:30 V15
Damage Experiences in Solar Thermal Power Plants Dr. B. Persigehl, Dr. J. Stoiber and R. Weber, Allianz Risk Consulting GmbH, Munich/Germany
08:55 V16
Offshore Wind Energy – Steel Structures Dr. S. Weise and S. Dörfeldt, OWT GmbH, Leer/Germany
09:20 V17
Lessons Learned from damages of mechanical drive trains of wind turbines Dr. T. Griggel and T. Gellermann, Allianz Risk Consulting GmbH, Munich/Germany
09:45 Coffee break Section V: Welding Technologies, Additive Manufacturing Moderator: Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany 10:15 V18
Laser-Multi-Pass Narrow-Gap Welding of Thick-Walled High Temperature Materials – 140 mm thick Alloy 617 occ B. Keßler, Dr. D. Dittrich, Prof. B. Brenner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
10.35 V19
Microstructure and Fatigue Behavior of Laser Welded Alloy 617 occ Prof. M. Zimmermann, Dr. J. Kaspar, R. Kühne and Prof. Brenner, Fraunhofer IWS, Dresden/Germany
10:55 V20
Advanced concepts for design life and residual life assessment of welded components under flexible operation applied on Alloy 617occ. Dr. G. Maier, Dr. I. Varfolomeev and H. Oesterlin, Fraunhofer IWM, Freiburg/Germany
11:15 V21
Additive Manufacturing of powdery Ni-based Superalloys for Advanced Application J. Moritz, Dr. E. Lopez, A. Seidel, M. Riede, F. Brückner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
MATERIALS AND QUALITY ASSURANCE 2019
5TH INTERNATIONAL VGB WORKSHOP MATERIALS AND QUALITY ASSURANCE 2019 The 5th International VGB Workshop "Materials and Quality Assurance" takes place in Dresden hosted by Fraunhofer IWS. Aim of the workshop is to permit results of advanced materials, welding and quality assurance aspects. The main topics are:
Lifetime Assessment, Flexibility l Materials and Components l Modern Welding Technologies, Additive Manufacturing l Quality Assurance, Damages I Renewable Energy
The workshop is aimed at manufacturers, planners, operators, insurers and experts interested in technology and its environment, researcher, authorities and associations. We look forward to seeing you in Dresden/Germany.
PROGRAMME (Subject to change) THURSDAY, 23 MAY 2019 08:00 Registration, Welcome-Coffee 09:00 Opening
Dr. J. Standfuß, Fraunhofer IWS, Dresden/Germany
Section I: Lifetime Assessment, Flexibility Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany 09:15 V1
Impact of Changing Markets on Both Operational Behaviour and Component Integrity Dr. C. Wignall, Uniper Technologies Limited, Nottingham/UK
09:40 V2
Fatigue monitoring of a boiler recirculation pump Dr. T. Müller, KSB SE & Co. KGaA, Frankenthal/Germany, Dr. K. Metzger, Grosskraftwerk Mannheim AG, Mannheim/Germany, S. Bergholz, Framatome GmbH, Erlangen/Germany, and F. Silber, MPA Stuttgart/Germany
10:05 V3
Life assessment, maintenance and repair of welded joints of pipings at high temperatures M.Sc. R. Pohja, Lic.Tech. S. Tuurna, D.Sc. T. Hakala, D.Sc. A. Laukkanen, D.Sc. T. Andersson and M.Sc. P. Auerkari, VTT Technical Research Center of Finland Ltd., Tampere/Finland
10:30 Coffee break 11:00 V4
Probabilistic Creep-Fatigue Lifetimes Assessment Approach: An Example Application F. Kölzow, Technische Universität Darmstadt, Darmstadt/Germany, Dr. K. Helbig, GE Power AG, Mannheim/Germany, Dr. C. Kontermann and Prof. M. Oechsner, Technische Universität Darmstadt, Darmstadt/Germany
Section II: Materials and Components Moderator: C. Ullrich, VGB, Essen/Germany 11:25 V05
Creep Life Assessment for Welded Joint of P91 Steel Considering Material Properties of Each Pipe Used at Power Plant Dr. M. Yaguchi, Central Research Institute of Electric Power Industry, Yokosuka/Japan
11:50 V06
Challenges of Creep Rupture Data Assessments using the example of a large dataset of Grade P91 Dr. M. Schwienheer, Technische Universität Darmstadt, Darmstadt/Germany
12:15 V07
Development of Boiler Material Technology and the Verification of its Practical Applicability in Japanese National A-USC Project Dr. T. Tokairin, Mitsubishi Hitachi Power Systems Ltd., Hiroshima/Japan and M. Kitamura, Mitsubishi Hitachi Power Systems Ltd., Yokohama/Japan
12:40 V08
Super VM12 - The new 12%Cr steel for high-temperature applications Dr. M. Subanović, Dr.rer.nat. J. Pirón, M. Jarrar, A. Gauss and Dr.rer.nat. André Schneider, Vallourec Deutschland GmbH, Düsseldorf/Germany
13:05 Lunch break Section III: Quality Assurance, Damages Moderator: Dr. G. Maier, Fraunhofer IWM, Freiburg/Germany 14:00 V09
Non-Destructive Weld Inspection during the Welding Process – Possibilities and Limitations of an Inline Monitoring Approach Dr. F. Schubert, Dr. B. Bendjus, Dr. U. Cikalova, M. Stephan, R. Hipp, E. Schulze, M. Barth and Z. Bor, Fraunhofer IKTS, Dresden/Germany
14:25 V10
Depth sizing methods of operation induced flaws with automated phased array ultrasonic inspections A. Marx and S. Medenbach, MuM Müller and Medenbach GmbH, Gladbeck/Essen
14:50 V11
T24-Challanges of the repair of service exposed membrane walls Dr. C. Ullrich1, T. Hauke2 and P. Körner1 1 VGB PowerTech Service GmbH, Essen/Germany 2 Lausitz Energie Kraftwerke AG, Cottbus/Germany
15:15 Coffee break 15:45 V12
Recent Damage Evaluations on Austenitic Boiler Tubes associated with Supercritical Plant Dr. S. Heckmann, RWE Power AG, Essen/Germany
16:10 V13
Forced Draft Fan Damages and Premature Fatigue Fractures in Cold Air Suction Ducts Dr. F. Unterumsberger, Mitsubishi Hitachi Power Systems Europe GmbH, Duisburg/Germany
16:35 V14
Remaining lifetime assessment of expansion joints in district heating grid P. Buhl, R. Nothdurft, EnBW Energie Baden-Württemberg AG, Stuttgart/Germany
18:45 Evening event at the ship “Salonschiff MS Gräfin Cosel” Riverboattrip, International Dixieland Festival, Fireworks hosted by KSB SE & Co. KGaA, Frankenthal/Germany
FRIDAY, 24 MAY 2019
Section IV: Renewable Energy Moderator: Dr. S. Heckmann, RWE Power AG, Essen/Germany 08:30 V15
Damage Experiences in Solar Thermal Power Plants Dr. B. Persigehl, Dr. J. Stoiber and R. Weber, Allianz Risk Consulting GmbH, Munich/Germany
08:55 V16
Offshore Wind Energy – Steel Structures Dr. S. Weise and S. Dörfeldt, OWT GmbH, Leer/Germany
09:20 V17
Lessons Learned from damages of mechanical drive trains of wind turbines Dr. T. Griggel and T. Gellermann, Allianz Risk Consulting GmbH, Munich/Germany
09:45 Coffee break Section V: Welding Technologies, Additive Manufacturing Moderator: Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany 10:15 V18
Laser-Multi-Pass Narrow-Gap Welding of Thick-Walled High Temperature Materials – 140 mm thick Alloy 617 occ B. Keßler, Dr. D. Dittrich, Prof. B. Brenner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
10.35 V19
Microstructure and Fatigue Behavior of Laser Welded Alloy 617 occ Prof. M. Zimmermann, Dr. J. Kaspar, R. Kühne and Prof. Brenner, Fraunhofer IWS, Dresden/Germany
10:55 V20
Advanced concepts for design life and residual life assessment of welded components under flexible operation applied on Alloy 617occ. Dr. G. Maier, Dr. I. Varfolomeev and H. Oesterlin, Fraunhofer IWM, Freiburg/Germany
11:15 V21
Additive Manufacturing of powdery Ni-based Superalloys for Advanced Application J. Moritz, Dr. E. Lopez, A. Seidel, M. Riede, F. Brückner and Prof. C. Leyens, Fraunhofer IWS, Dresden/Germany
11:35 V22
Inline Monitoring of Material Parameters in Additive Manufacturing by Laser Speckle Photometry Dr. U. Cikalova, Dr. B. Bendjus, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden/Germany
11:55 Discussion of presentation, information about working groups Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany
12.10 Lunch break 13:10
Working groups with practical presentations A – Potentials for Laser Beam Welding of High Tem-perature alloys Processes/Systems Technology/Quality Assurance Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany B – Microstructure and fatigue behavior Structure and Defect Evaluation/High Resolution Electron Microscopy/Efficient Parameter Identification Prof. M. Zimmermann, Fraunhofer IWS, Dresden/Germany C – Activities and Potentials of additive manufacturing at Fraunhofer IWS Processes/Systems Technology/Inspection Methods Dr. E. Lopez, Fraunhofer IWS, Dresden/Germany
14:50 Bilateral exchange of knowledge for individual topics with Fraunhofer scientists
15:00
End of the workshop
ALL INFORMATION ARE ALSO AVAILABLE ON OUR WEBSITE https://www.vgb.org/en/ws_materials_quality_assurance_2019.html
RAILWAY Distance Central station to IWS: 4.5 km (approx. 15 min. by taxi) AIRPORT Distance Airport Dresden to IWS: 15 km (approx. 30 min.by taxi)
Fraunhofer-Institut für Werkstoff- und Strahltechnik Dresden
11:35 V22
Inline Monitoring of Material Parameters in Additive Manufacturing by Laser Speckle Photometry Dr. U. Cikalova, Dr. B. Bendjus, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden/Germany
11:55 Discussion of presentation, information about working groups Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany
12.10 Lunch break 13:10
Working groups with practical presentations A – Potentials for Laser Beam Welding of High Tem-perature alloys Processes/Systems Technology/Quality Assurance Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany B – Microstructure and fatigue behavior Structure and Defect Evaluation/High Resolution Electron Microscopy/Efficient Parameter Identification Prof. M. Zimmermann, Fraunhofer IWS, Dresden/Germany C – Activities and Potentials of additive manufacturing at Fraunhofer IWS Processes/Systems Technology/Inspection Methods Dr. E. Lopez, Fraunhofer IWS, Dresden/Germany
14:50 Bilateral exchange of knowledge for individual topics with Fraunhofer scientists
15:00
End of the workshop
ALL INFORMATION ARE ALSO AVAILABLE ON OUR WEBSITE https://www.vgb.org/en/ws_materials_quality_assurance_2019.html
RAILWAY Distance Central station to IWS: 4.5 km (approx. 15 min. by taxi) AIRPORT Distance Airport Dresden to IWS: 15 km (approx. 30 min.by taxi)
Fraunhofer-Institut für Werkstoff- und Strahltechnik Dresden
All information as of 10 May 2019.
MATERIALS AND QUALITY ASSURANCE 2019
VGB WORKSHOPREGISTRATION VGB WORKSHOP – MATERIALS AND QUALITY ASSURANCE
23/24 May 2019, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS, Dresden/Germany [ ] VGB-Members EUR 780.00 [ ] Non-Members EUR 990.00
____________________________________________________________________________ Title, Surname, First Name ____________________________________________________________________________ Company ____________________________________________________________________________ Street, P.O. Box ____________________________________________________________________________ Postal code, City ____________________________________________________________________________ E-Mail ____________________________________________________________________________ Invoice address (if different from above) ____________________________________________________________________________ VAT-No. ____________________________________________________________________________ Cost Center/Order number ____________________________________________________________________________ Date, Signature and Company stamp EVENING EVENT [ ] I will join the evening event on 23 May 2019 Please send the registration back until 15 May 2019 to Diana Ringhoff | P.O. Box 10 39 32 | 45039 Essen/Germany Phone: +49 201 8128-232 | Fax: +49 201 8128-321 E-mail: [email protected] or use the online-registration via VGB website. For detailed information on attendance as well as data protection please refer to the VGB homepage: http://www.vgb.org
PRACTICAL INFORMATION VENUE Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS Winterbergstrasse 28 l 01277 Dresden/Germany Phone: +49 351 83391-3228 | www.iws.fraunhofer.de
REGISTRATION Participants are requested to register until 15 May 2019 using the enclosed registration form. The registration is binding and limited up to 85 persons. The places will be awarded after entrance of the registra-tion and confirmed by a confirmation e-mail. The workshop will take place if a minimum of 25 persons are registered until 19 April 2019. You will receive your ticket at the workshop office in front of the work-shop room. Please mention the invoice address! Online registration is also possible: https://www.vgb.org/en/COR-registerFor-300339.html ATTENDANCE VGB-members EUR 780.00 | Non-members EUR 990.00 The attendance fees are free of VAT. The attendance fee includes the workshop programme, participation list, coffee breaks, lunches and participation in the evening event on 23 May 2019. After the workshop all presentations will be available for download on the VGB website. Credit cards or foreign currency cannot be accepted for payment at the workshop office. The following fee will be charged for cancellation of the registration: Up to 14 days prior to the workshop EUR 50.00 Within 14 days prior to the workshop 100 % Only written cancellations are accepted.
EVENING EVENT On Thursday, 23 May 2019 every participant is invited to join our evening event at the “Salonschiff MS Gräfin Cosel”. Admittance: 18:45 | Start: 19:30 Pier on ‘Terrassenufer’ – access via Münzgasse. Please take your conference badge with you.
ACCOMMODATION Pullmann Dresden Newa, Prager Strasse 2c, 01069 Dresden/German| www.pullmann-dresden-newa.com Phone: +49 351 4814-109 E-mail: [email protected] Code: VGB-Workshop, Single room € 99 (incl. break.), Double room € 119 (incl. break.) Please make your reservation before 1 May 2019.
VGB office regrets, being unable making reservations.
WITH FRIENDLY SUPPORT
MATERIALS AND QUALITY ASSURANCE
23/24 MAY 2019 Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS DRESDEN/GERMANY
11:35 V22
Inline Monitoring of Material Parameters in Additive Manufacturing by Laser Speckle Photometry Dr. U. Cikalova, Dr. B. Bendjus, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden/Germany
11:55 Discussion of presentation, information about working groups Moderator: Dr. J. Bareiß, EnBW, Stuttgart/Germany
12.10 Lunch break 13:10
Working groups with practical presentations A – Potentials for Laser Beam Welding of High Tem-perature alloys Processes/Systems Technology/Quality Assurance Dr. D. Dittrich, Fraunhofer IWS, Dresden/Germany B – Microstructure and fatigue behavior Structure and Defect Evaluation/High Resolution Electron Microscopy/Efficient Parameter Identification Prof. M. Zimmermann, Fraunhofer IWS, Dresden/Germany C – Activities and Potentials of additive manufacturing at Fraunhofer IWS Processes/Systems Technology/Inspection Methods Dr. E. Lopez, Fraunhofer IWS, Dresden/Germany
14:50 Bilateral exchange of knowledge for individual topics with Fraunhofer scientists
15:00
End of the workshop
ALL INFORMATION ARE ALSO AVAILABLE ON OUR WEBSITE https://www.vgb.org/en/ws_materials_quality_assurance_2019.html
RAILWAY Distance Central station to IWS: 4.5 km (approx. 15 min. by taxi) AIRPORT Distance Airport Dresden to IWS: 15 km (approx. 30 min.by taxi)
Fraunhofer-Institut für Werkstoff- und Strahltechnik Dresden
VGB WORKSHOPREGISTRATION VGB WORKSHOP – MATERIALS AND QUALITY ASSURANCE
23/24 May 2019, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS, Dresden/Germany [ ] VGB-Members EUR 780.00 [ ] Non-Members EUR 990.00
____________________________________________________________________________ Title, Surname, First Name ____________________________________________________________________________ Company ____________________________________________________________________________ Street, P.O. Box ____________________________________________________________________________ Postal code, City ____________________________________________________________________________ E-Mail ____________________________________________________________________________ Invoice address (if different from above) ____________________________________________________________________________ VAT-No. ____________________________________________________________________________ Cost Center/Order number ____________________________________________________________________________ Date, Signature and Company stamp EVENING EVENT [ ] I will join the evening event on 23 May 2019 Please send the registration back until 15 May 2019 to Diana Ringhoff | P.O. Box 10 39 32 | 45039 Essen/Germany Phone: +49 201 8128-232 | Fax: +49 201 8128-321 E-mail: [email protected] or use the online-registration via VGB website. For detailed information on attendance as well as data protection please refer to the VGB homepage: http://www.vgb.org
PRACTICAL INFORMATION VENUE Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS Winterbergstrasse 28 l 01277 Dresden/Germany Phone: +49 351 83391-3228 | www.iws.fraunhofer.de
REGISTRATION Participants are requested to register until 15 May 2019 using the enclosed registration form. The registration is binding and limited up to 85 persons. The places will be awarded after entrance of the registra-tion and confirmed by a confirmation e-mail. The workshop will take place if a minimum of 25 persons are registered until 19 April 2019. You will receive your ticket at the workshop office in front of the work-shop room. Please mention the invoice address! Online registration is also possible: https://www.vgb.org/en/COR-registerFor-300339.html ATTENDANCE VGB-members EUR 780.00 | Non-members EUR 990.00 The attendance fees are free of VAT. The attendance fee includes the workshop programme, participation list, coffee breaks, lunches and participation in the evening event on 23 May 2019. After the workshop all presentations will be available for download on the VGB website. Credit cards or foreign currency cannot be accepted for payment at the workshop office. The following fee will be charged for cancellation of the registration: Up to 14 days prior to the workshop EUR 50.00 Within 14 days prior to the workshop 100 % Only written cancellations are accepted.
EVENING EVENT On Thursday, 23 May 2019 every participant is invited to join our evening event at the “Salonschiff MS Gräfin Cosel”. Admittance: 18:45 | Start: 19:30 Pier on ‘Terrassenufer’ – access via Münzgasse. Please take your conference badge with you.
ACCOMMODATION Pullmann Dresden Newa, Prager Strasse 2c, 01069 Dresden/German| www.pullmann-dresden-newa.com Phone: +49 351 4814-109 E-mail: [email protected] Code: VGB-Workshop, Single room € 99 (incl. break.), Double room € 119 (incl. break.) Please make your reservation before 1 May 2019.
VGB office regrets, being unable making reservations.
WITH FRIENDLY SUPPORT
MATERIALS AND QUALITY ASSURANCE
23/24 MAY 2019 Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS DRESDEN/GERMANY
141
ADDRESS AND DIRECTIONS
Address
Fraunhofer-Institut für Werkstoff- und
Strahltechnik IWS Dresden
(Fraunhofer Institute for Material and
Beam Technology)
Winterbergstr. 28
01277 Dresden
Internet
www.iws.fraunhofer.de
phone +49 351 83391-0
fax +49 351 83391-3300
e-mail: [email protected]
by car (from Autobahn / Highway)
- take Autobahn A4 or A13 to inter section Dresden-West, follow new Autobahn A17 to exit
Südvorstadt / Zentrum
- follow road B170 in direction Stadtzentrum (city center) to Pirnaischer Platz (about 6 km)
- at Pirnaischer Platz turn right towards "Gruna / VW-Manufaktur"
- continue straight until the end of the "Großer Garten" (Great Garden) and then turn right
onto Karcherallee
- at the next traffic light turn left onto Winterbergstraße and continue straight until IWS
by railway and tram
- from Dresden main railway station take line #10 to Straßburger Platz
- change to line #1 (Prohlis) or #2 (Kleinzschachwitz) heading out from the city; exit at
Zwinglistraße stop
- 10 minutes to walk from there (in the direction of Grunaer Weg)
by air plane
- from Airport Dresden-Klotzsche with a taxi to Winterbergstraße 28 (about 10 km)
- or with public transportation (shuttle train) to the main railway station (Hauptbahnhof),
and continue with the tram
Fraunhofer IWS Annual Report 2012