Material Safety Data Sheet O ELANTAS Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : Product Use Description :
Company :
Prepared by : Teleplione : Visit our web site : E-mail address : Emergency telephone :
SECTION 2. HAZARDS IDENTIFIOl
Emergency Overview
Form Colour Odour Hazard Summary
OSHA Regulatory Status
This material is considered haza CFR1910.1200)
Potential Health Effects
Eyes
Skin
Ingestion
ELAN-Tron® C 301 Hardener Epoxy Hardener
ELANTAS PDG, INC. 5200 North 2nd Street St. Louis MO 63147 Todd Thomas, Manager Regulatory Affairs (314) 621-5700 www.elantas.com [email protected] INFOTRAC- 1-800-535-5053
TION
liquid colourless irritating HARMFUL IN CONTACT WITH SKIN. MAY CAUSE SENSITIZATION BY SKIN CONTACT. CAUSES SEVERE BURNS. RISK OF SERIOUS DAMAGE TO EYES. IRRITATING TO RESPIRATORY SYSTEM. MAY CAUSE SENSITIZATION BY INHALATION.
rdous by the OSHA Hazard Communication Standard (29
May cause permanent eye injury. Causes severe irritation and pain. Direct contact with the product or exposure to vapors or mist may cause stinging, tearing and redness. Corneal damage may occur. May cause blindness.
Causes severe skin burns. Contact may cause irritation and sensitization. May produce central nervous system depression with headache and/or nausea.
Ingestion may cause gastrointestinal irritation, nausea. vomiting and diarrhoea.
1 /10
Material Safety Data Sheet
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Inhalation
Chronic Exposure
Aggravated Medical Condition
Primary Routes of Entry
Exposure can result in irritation and corrosive action in the mouth, stomach tissue and digestive tract. Causes severe digestive tract burns.
: May cause respiratory tract sensitization. May cause upper respiratory tract irritation. May cause severe irritation and burns to mucous membranes.
: Chronic exposure may cause bronchitis and asthma.
: Overexposure may aggravate existing eye, skin, and/or respiratory disorders. Asthma
: Inhalation Skin contact Skin Absorption Eyes
Carcinogenicity:
No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by lARC.
No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA.
No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen byACGIH.
Environmental Effects
Environmental Effects : No information available.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
Aliphatic Amine
Hazardous components
The specific chemical identity/weight percent of proprietary ingredient(s) is a trade secret
Component CAS-No. Weight percent
2/ 10
Material Safety Data Sheet O ELANTAS Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010
Diethylenetriamine 111-40-0 60.00 -
Print Date 06/07/2010
100.00 1
SECTION 4. FIRST AID MEASURES
First aid procedures
Inhalation
Skin contact
Eye contact
Ingestion
Notes to physician
Risks
If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Consult a physician.
In case of contact, immediately flush skin with soap and plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash and thoroughly clean contaminated clothing and shoes before reuse. Consult a physician.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Consult a physician.
If swallowed, consult a physician. Do NOT induce vomiting. If victim is fully conscious, give a cupful of water.
No information available.
SECTION 5. FIRE-FIGHTING MEASURES
Flammable properties
Flash point
Suitable extinguishing media
Unsuitable extinguishing media
Special protective equipment for fire-fighters
Specific hazards during fire fighting
98 °C (210.00 °F)
Carbon dioxide (C02) Dry chemical Foam Water mist
Water spray Water spray jet
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Do not use a solid water stream as it may scatter and spread fire. The pressure in sealed containers can increase under the influence of heat. Thermal decomposition can lead to release of irritating gases and vapours.
3 / 10
Material Safety Data Sheet O ELANTAS Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2
Hazardous decomposition : products due to incomplete combustion.
Further information :
Revision Date 06/07/2010 Print Date 06/07/2010
Carbon oxides nitrogen oxides (NOx) Material will polymerize at very high temperatures.
Remove ignition sources Immediately evacuate personnel to safe areas. Use a water spray to cool fully closed containers.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions :
Environmental precautions
Methods for containment :
Methods for cleaning up
Additional advice :
Remove all ignition sources. Ventilate area. Avoid breathing vapors. Refer to protective measures listed in sections 7 and 8.
Clean contaminated floors and objects thoroughly while observing environmental regulations.
Stop leak. Dike and contain spill.
Absorb with inert absorbent material and dispose of in accordance with applicable regulations.
Shut off source of spill if it can be done safely.
SECTION 7. HANDLING AND STORAGE
Handling
Handling :
Storage
Advice on common storage :
Keep closure tight and container upright to prevent leakage. Containers should be grounded when being emptied. Never use pressure to empty. ATTENTION: Emptied containers may retain hazardous residue and explosive vapors. Keep away from heat, sparks and flames. Do not cut, puncture or weld on or near this container. Follow label warnings until container is thoroughly cleaned or destroyed.
Do not store above 49°C (120 °F). Do not store near acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
4 / 10
Material Safety Data Sheet
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Components with workplace control parameters
Components
Diethylenetriami ne
CAS-No.
111-40-0
Value
TWA
TWA
Control parameters 1 ppm
1 ppm 4 mg/m3
Update
2007-01-01
1989-01-19
Basis
ACGIH
OSHA PO
Engineering measures
Engineering measures
Personal protective equipment
Eye protection :
Hand protection :
Skin and body protection :
Respiratory protection
Hygiene measures
Use with adequate ventilation. All application areas should be ventilated in accordance with applicable OSHA regulations. (29 CFR 1910.94)
Use safety eyewear designed to protect against splash of liquids. Ensure that eyewash stations and safety showers are close to the workstation location.
Impervious gloves
Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Wear an appropriate, properly-fitted respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates that vapor/mist levels are below applicable limits. Follow respirator manufacturer's directions for respirator use.
Wash thoroughly after handling. Do not get in eyes. Do not get on skin. Avoid prolonged or repeated breathing of vapor.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Form Colour Odour Odor Threshold Flash point
liquid colourless irritating no data available 98 °C (210.00 °F) Method:
5/ 10
Material Safety Data Sheet O ELANTAS Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2
Ignition temperature Lower explosion limit Upper explosion limit Molecular Weight
PH Freezing point Boiling point/boiling range
Vapour pressure
Evaporation rate
Density
Bulk density
Partition coefficient: n-oct an 0 I/water Relative vapour density
SECTION 10. STABILITY AND REA
Conditions to avoid
Materials to avoid
Hazardous decomposition products
Chemical stability
SECTION 11. TOXICOLOGICAL INF
Acute oral toxicity (Component)
Revision Date 06/07/2010 Print Date 06/07/2010
no data available no data available no data available 103.00 g/mol
no data available no data available 207 °C (405 °f)
<0.19hPa
1
0.94 g/cm3 at 21 °C(70 °F) (1.013 hPa)
940 kg/m3
no data available
13.038
CTIVITY
Heat, flames and sparks. Nitrosamines, many of which are known to be carcinogens. may be formed when this product comes in contact with nitrous acid, nitrites, or atmospheres with high nitrous oxide concentrations.
Strong oxidizing agents Metals Acids
Carbon dioxide, carbon monoxide and toxic vapors. nitrogen oxides (NOx) Hydrocarbons Ammonia
Stable
ORMATION
Component: 111-40-0 Diethylenetriamine LD50 rat Dose: 1,080 mg/kg
6/ 10
Material Safety Data Sheet
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Acute dermal toxicity (Component)
Acute inhalation toxicity (Component)
Skin irritation (Component)
Eye irritation(Component)
Component: 111-40-0 Diethylenetriamine LD50 rabbit Dose: 1,050 mg/kg
Component: 111-40-0 Diethylenetriamine LC50 no data available
Component: 111-40-0 Diethylenetriamine rabbit Result: Corrosive to skin
Component: 111-40-0 Diethylenetriamine rabbit Result: Corrosive to eyes
SECTION 12. ECOLOGICAL INFORMATION
Additional ecological information (Product)
no data available
SECTION 13. DISPOSAL CONSIDERATIONS
Further information Dispose of in accordance with applicable Federal, State, and local regulations. Under the Resource Conservation and Recovery Act (RCRA) regulations, it is the responsibility of the product user to determine, at the time of disposal, whether a material should be classified as a hazardous waste. Consult your attorney or appropriate regulatory affairs officer for information on proper disposal.
SECTION 14. TRANSPORT INFORMATION
DOT
lATA
UN Number : Proper shipping name : Class : Packing group :
UN Number Description of the goods Class Packing group ICAO-Labels Packing instruction (cargo aircraft) Packing instruction (passenger aircraft)
2079 DIETHYLENETRIAMINE 8 II
: 2079 : DIETHYLENETRIAMINE : 8 : II : 8 : 812
: 808
7/ 10
Material Safety Data Sheet
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
IMDG
Package Instructi quantity)
UN Number Description of the Class Packing group IMDG-Labels EmSNumberl EmSNumber2 Marine pollutant
on (Limited
goods
Y808
UN 2079 DIETHYLENETRIAMINE 8 II 8 F-A S-B no
SECTION 15. REGULATORY INFORMATION
HMIS Classification Health hazard: 3 Chronic Health Hazard: * Flammability: 1 Reactivity: 0 PPLSafety Glasses, Gloves, Dust and Vapor Respirator
National Fire Protection : IIIB Association (NFPA) Class
Emergency Planning Community Right-To-Know (EPCRA)
SARA 302 Components : SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
If listed below, this product contains toxic chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthonzation Act of 1986 and 40 CFR part 372.
SARA 311/312 Hazards Acute Health Hazard Chronic Health Hazard
Toxic Substances Control Act (TSCA) TSCA Status : We certify that all of the components of this product are either
listed on the TSCA Inventory or are not subject to the notification requirements (exempt)
Clean Air Act & Related Information
Non-volatile (Wt) 0% Method: Not available
8/ 10
Material Safety Data Sheet O ELANTAS Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2
Non-volatile information is not a
Hazardous Air Pollutants
Revision Date 06/07/2010 Print Date 06/07/2010
specification.
If not listed above, this product does not contain HAPs at 1%or 0.1% or greater. Refer to Section 3 for HAP weight percentage.
Resource Conservation and Recovery Act
EPA Hazardous Waste Code(s)
State Laws
Massachusetts Right To Know Components
Pennsylvania Right To Know Components
New Jersey Right To Know Components
New Jersey Trade Secret Registry Number for the product (NJ TSRN)
California Prop. 65 Components
D002 Corrosive
Diethylenetriamine 111-40-0
Diethylenetriamine 111-40-0
Diethylenetriamine 111-40-0
NOT APPLICABLE
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Canadian Environmental Protection Act
Domestic Substances List DSL Status
WHMIS Classification
We certify that all of the components of this product are listed on the DSL.
D2B E
SECTION 16. OTHER INFORMATION
Further information
9/ 10
Material Safety Data Sheet ^ \ PI ikMTikC Electrical Insulation
ELAN-Tron® C 301 Hardener Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other matenals or in any process, unless specified in the text.
10 /10
Material Safety Data Sheet ^ \ P I i k M T i k C Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product name Product Use Descnption
Company
Prepared by Telephone Visit our web site E-mail address Emergency telephone
SECTION 2. HAZARDS IDENTIFI
Emergency Overview
Form Hazard Summary
OSHA Regulatory Status
This matenal is considered ha CFR1910.1200)
Potential Health Effects
Eyes
Skin
Ingestion
Inhalation
Chronic Exposure
Aggravated Medical
E 203 BLACK SEALER PASTE Electncal Insulation
ELANTAS PDG, INC. 5200 North 2nd Street St. Louis MO 63147 Todd Thomas, Manager Regulatory Affairs (314) 621-5700 www.elantas.com [email protected] INFOTRAC- 1-800-535-5053
NATION
: liquid : HARMFUL IN CONTACT WITH SKIN.
MAY CAUSE SENSITIZATION BY SKIN CONTACT. IRRITATING TO EYES.
zardous by the OSHA Hazard Communication Standard (29
: Causes eye irritation.
: May cause allergic reaction. May cause sensitization by skin contact. Prolonged contact may result in discoloration, swelling. scaling, and/or blistering. May be harmful if absorbed through skin.
: Harmful if swallowed. Ingestion may cause gastrointestinal irritation, nausea. vomiting and diarrhoea.
: May cause allergic respiratory reaction. Physical degradation of the cured product (i.e. sanding. abrading, etc.) may pose a dust hazard.
: No evidence of adverse effects from available information.
: Overexposure may aggravate existing eye, skin, and/or
1 /11
Material Safety Data Sheet
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Condition
Primary Routes of Entry
Carcinogenicity:
respiratory disorders.
Inhalation Skin contact Eyes
lARC Crystalline silica 14808-60-7
No component of this product present at levels greater than or carcinogen or potential carcinogen by OSHA. NTP Crystalline silica
equal to 0 .1% is identified as a
14808-60-7
ACGIH Crystalline silica 14808-60-7
Environmental Effects
Environmental Effects : No information available.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
Epoxy Resin Solution
Hazardous components
The specific chemical identity/weight percent of proprietary ingredient(s) is a trade secret
Component
Bisphenol A -Epichlorohydrin based epoxy resin Magnesium silicate talc
Amorphous silica gel
Chlorite
Crystalline silica
CAS-No.
25068-38-6
14807-96-6
112945-52-5
1318-59-8
14808-60-7
Weight percent
30.00 - 60.00
30.00 - 60.00
1.00 - 5.00
1.00-5.00
0.10- 1.00
2/ 11
Material Safety Data Sheet O ELANTAS Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
SECTION 4. FIRST AID MEASURES
First aid procedures
Inhalation :
Skin contact :
Eye contact :
Ingestion :
Notes to physician
Risks
If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Consult a physician.
In case of contact, immediately flush skin with soap and plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash and thoroughly clean contaminated clothing and shoes before reuse. Consult a physician.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Consult a physician.
If swallowed, consult a physician. Never give anything by mouth to an unconscious person.
No information available.
SECTION 5. FIRE-FIGHTING MEASURES
Flammable properties
Flash point :
Suitable extinguishing : media
Unsuitable extinguishing : media
Special protective : equipment for fire-fighters
Specific hazards during fire : fighting
Hazardous decomposition : products due to incomplete combustion.
> 94 °C (> 201 °F)
Carbon dioxide (C02) Dry chemical Foam Water mist
Water spray Water spray jet
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Do not use a solid water stream as it may scatter and spread fire. The pressure in sealed containers can increase under the influence of heat.
Carbon oxides nitrogen oxides (NOx) Material will polymerize at very high temperatures.
3/ 11
Material Safety Data Sheet
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Further information Remove ignition sources Immediately evacuate personnel to safe areas. Use a water spray to cool fully closed containers.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Environmental precautions
Methods for containment
Methods for cleaning up
Additional advice
Remove all ignition sources. Ventilate area. Avoid breathing vapors. Refer to protective measures listed in sections 7 and 8.
Clean contaminated floors and objects thoroughly while observing environmental regulations.
Stop leak. Dike and contain spill.
Absorb with inert absorbent material and dispose of in accordance with applicable regulations.
Shut off source of spill if it can be done safely.
SECTION 7. HANDLING AND STORAGE
Handling
Handling
Storage
Advice on common storage
Keep closure tight and container upright to prevent leakage. Containers should be grounded when being emptied. Never use pressure to empty. ATTENTION: Emptied containers may retain hazardous residue and explosive vapors. Keep away from heat, sparks and flames. Do not cut, puncture or weld on or near this container. Follow label warnings until container is thoroughly cleaned or destroyed.
Temperatures exceeding 27°C may cause product viscosity to become unstable. Allow product to stabilize at room temperature prior to use.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Components with workplace control parameters
Components CAS-No. Value Control Update Basis
4 / 11
Material Safety Data Sheet
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010
O ELANTAS Electrical Insulation
Print Date 06/07/2010
Magnesium silicate talc
Amorphous silica gel
Crystalline silica
14807-96-6
112945-52-5
14808-60-7
TWA
TWA
TWA
TWA
TWA
TWA
TWA
parameters 20million particles per cubic foot
2 mg/m3
0.1fibre/cm3
2 mg/m3
80 mg/m3
0.025 mg/m3
0.1 mg/m3
1997-08-04
1989-01-19
2008-01-01
2007-01-01
2007-01-01
1989-01-19
OSHA Z3
OSHA PO
ACGIH
ACGIH
OSHA PI
ACGIH
OSHA PO
Engineering measures
Engineering measures
Personal protective equipment
Eye protection :
Hand protection :
Skin and body protection
Use with adequate ventilation. All application areas should be ventilated in accordance with applicable OSHA regulations. (29 CFR 1910.94) This product contains a particulate(s) that is considered hazardous per OSHA (29 CFR 1910.1200) and is listed in Section III as a precautionary warning. Under normal conditions of use, this product as supplied does not pose a health risk from particulate matter. Physical degradation of the cured product (i.e. sanding, abrading, etc.) may pose a dust hazard. Repeated inhalation of such dust may cause lung injury.
Use safety eyewear designed to protect against splash of liquids. Ensure that eyewash stations and safety showers are close to the workstation location.
Impervious gloves
Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
5/ 11
Material Safety Data Sheet O ELANTAS Electrical Insulation
E 203 BLACK SEALER PASTE Version 2
Respiratory protection
Hygiene measures
Revision Date 06/07/2010 Print Date 06/07/2010
Wear an appropriate, properly-fitted respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates that vapor/mist levels are below applicable limits. Follow respirator manufacturer's directions for respirator use.
Wash thoroughly after handling. Do not get in eyes. Do not get on skin. Avoid prolonged or repeated breathing of vapor.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Form Odor Threshold Flash point
Ignition temperature Lower explosion limit Upper explosion limit pH Freezing point Boiling point Vapour pressure Evaporation rate Density
Bulk density
Partition coefficient: n-octanol/water Relative vapour density
SECTION 10. STABILITY AND REA
Conditions to avoid
Materials to avoid
Hazardous decomposition products
Chemical stability
liquid no data available > 94 °C (> 201 °F) Method:
no data available no data available no data available no data available no data available no data available no data available no data available 1.6320 g/cm3 at 25 ^€(77 °F) (1.013 hPa)
1,632.2756 kg/m3
no data available
no data available
CTIVITY
Heat, flames and sparks.
Acids, bases, strong oxidizers, & metallic halides (salts).
The by-products expected in incomplete pyrolysis or combustion of epoxy resins are mainly phenolics, CO and water.
Stable at room temperatures; polymerization may occur
6/ 11
Material Safety Data Sheet O ELANTAS Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
SECTION 11. TOXICOLOGICAL INFORMATION
Acute oral toxicity (Component)
Acute dermal toxicity : (Component)
Acute inhalation toxicity : (Component)
Skin irritation (Component) :
Component: 25068-38-6 Bisphenol A- Epichlorohydrin based epoxy resin LD50 rat Dose: 11,400 mg/kg
Component: 14807-96-6 Magnesium silicate talc no data available
Component: 112945-52-5 Amorphous silica gel LD50 rat Dose:> 10,000 mg/kg
Component: 25068-38-6 Bisphenol A - Epichlorohydrin based epoxy resin LD50 rabbit Dose: 23,400 mg/kg
Component: 14807-96-6 Magnesium silicate talc no data available
Component: 112945-52-5 Amorphous silica gel LD50 rabbit Dose: > 5,000 mg/kg
Component: 25068-38-6 Bisphenol A - Epichlorohydrin based epoxy resin LC50 no data available
Component: 14807-96-6 Magnesium silicate talc no data available
Component: 112945-52-5 Amorphous silica gel LC50 rat Dose: 0.1390 mg/l
Component: 25068-38-6 Bisphenol A - Epichlorohydrin based epoxy resin rabbit Result: Moderate skin irritation
Component: 112945-52-5 Amorphous silica gel rabbit Result: No skin irritation
7/11
Material Safety Data Sheet # ^ E L A N T A S Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
Eye irritation(Component) : Component: 25068-38-6 Bisphenol A - Epichlorohydrin based epoxy resin rabbit Result: Eye irritation
Component: 14807-96-6 Magnesium silicate talc no data available
Component: 112945-52-5 Amorphous silica gel rabbit Result: No eye irritation
SECTION 12. ECOLOGICAL INFORMATION
Additional ecological : no data available information (Product)
SECTION 13. DISPOSAL CONSIDERATIONS
Further information : Dispose of in accordance with applicable Federal, State, and local regulations. Under the Resource Conservation and Recovery Act (RCRA) regulations, it is the responsibility of the product user to determine, at the time of disposal, whether a material should be classified as a hazardous waste. Consult your attorney or appropriate regulatory affairs officer for information on proper disposal.
SECTION 14. TRANSPORT INFORMATION
DOT Not dangerous goods
lATA Not dangerous goods
IMDG_US Not dangerous goods
SECTION 15. REGULATORY INFORMATION
HMIS Classification : Health hazard: 2 Flammability: 1 Reactivity: 0 PPI:Safety Glasses, Gloves
National Fire Protection : IIIB Association (NFPA) Class
/11
Material Safety Data Sheet O ELANTAS Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010
Emergency Planning Community Right-To-Know (EPCRA)
SARA 302 Components Epichlorohydrin
Print Date 06/07/2010
106-89-8
If listed below, this product contains toxic chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372.
SARA 311/312 Hazards Acute Health Hazard
Toxic Substances Control Act (TSCA) TSCA Status : We certify that all of the components of this product are either
listed on the TSCA Inventory or are not subject to the notification requirements (exempt)
Clean Air Act & Related Information
Non-volatile (Wt)
Non-volatile information is not a
Hazardous Air Pollutants
99% Method: Not available
specification.
If not listed above, this product does not contain HAPs at 1%or 0.1% or greater. Refer to Section 3 for HAP weight percentage.
Resource Conservation and Recovery Act
EPA Hazardous Waste Code(s)
State Laws
Massachusetts Right To Know Components
Pennsylvania Right To Know Components
New Jersey Right To Know Components
Magnesium silicate talc
Bisphenol A - Epichlorohydrin based epoxy resin Magnesium silicate talc Amorphous silica gel
Bisphenol A - Epichlorohydrin based epoxy resin Magnesium silicate talc
Not applicable.
14807-96-6
25068-38-6
14807-96-6 112945-52-5
25068-38-6
14807-96-6
9/ 11
Material Safety Data Sheet O ELANTAS Electrical Insulation
E 203 BLACK SEALER PASTE Version 2
New Jersey Trade Secret Registry Number for the product (NJ TSRN)
California Prop. 65 Components
Revision Date 06/07/2010 Print Date 06/07/2010
Amorphous silica gel 112945-52-5 Chlorite 1318-59-8
NOT APPLICABLE
WARNING! This product contains a chemical known to the State of California to cause cancer.
Contains trace concentrations of Epichlorohydrin Crystalline silica 14808-60-7 Carbon black 1333-86-4 Phenyl glycidyl ether 122-60-1 Epichlorohydrin 106-89-8 WARNING! This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Contains trace concentrations of Epichlorohydrin Epichlorohydrin 106-89-8
Canadian Environmental Protection Act
Domestic Substances List DSL Status
WHMIS Classification
We certify that all of the components of this product are listed on the DSL.
D2A D2B
SECTION 16. OTHER INFORMATION
Further information
The information provided in this Safety Data Sheet is correct to the best of our knowledge. information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use not to be considered a warranty
processing, storage, transportation, disposal and release and is or quality specification. The information relates only to the
specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
10/11
Material Safety Data Sheet ^ \ P I i k M T i k C Electrical Insulation
E 203 BLACK SEALER PASTE Version 2 Revision Date 06/07/2010 Print Date 06/07/2010
11 / 11