MANUFACTURER OF SEAMLESS TUBES, PIPES & BARS
ISO 9001: 2008EN 9100:2009
TITANIUM ALLOYS FOR AEROSPACE NICKEL ALLOYS NUCLEAR POWER STAINLESS STEEL SHIPBUILDING CHEMICAL/PETROCHEMICAL PROCESS ENGINEERING OFFSHORE INDUSTRY
О КОМПАНИИ
1
SPACE
TITANIUM ALLOYSNICKEL ALLOYS
STAINLESS STEEL
AEROSPACE NUCLEAR POWER
SHIPBUILDINGCHEMICAL/PETROCHEMICAL
PROCESS ENGINEERINGOFFSHORE INDUSTRY
MISSION STATEMENT
OUR VISION
To strengthen our position to be one of the best International producers of seamless cold-drawn and hot-pressed tubes and pipes for the process industries of the world, using our more than 39-years knowledge, experience, state of the art equipment and scientific technological developments.
OUR MISSION
To provide our customers on a global basis with high quality products to all Internationally recognized technical specifications at competitive prices. To provide a quality based service to each and every customer and satisfy their needs. Wide product range and highly experienced team of technical expertise and quality management allows OSCAR PG to meet highest demands and satisfy all expectations of our customers.
OUR VALUES
Customer service. Quality products. Teamwork and Qualified technical experience. Reliability and Integrity.
PROVIDING QUALITY PRODUCTS TO GLOBAL INDUSTRIES
POWER GENERATION
AIRCRAFT
MISSION AND APPLICATION
DEFENSE
NUCLEAR
PETROCHEMICAL
SHIPBUILDING GAS & OIL
CHEMICAL
PROCESS ENGINEERING
TITANIUM ALLOYSNICKEL ALLOYSSTAINLESS STEEL
AEROSPACE NUCLEAR POWERSHIPBUILDINGCHEMICAL/PETROCHEMICALPROCESS ENGINEERINGOFFSHORE INDUSTRY
2
DEVELOPMENT AND FACILITIES
DEVELOPMENT OF OUR COMPANY
OSCAR Production Group is a leading manufacturer of high quality heat and corrosion resistant tube and pipe in titanium alloys, nickel alloys and stainless steels.
OSCAR Production Group was founded on the manufacturing and technical facilities of the Tube Drawing Workshop No. 4. (TDW-4) of the original Nikopol Yuzhnotrubny Plant (NYTB) in Ukraine, which was built in 1935. In 1976 TDW-4 plant started to specialize in the cold forming technology (cold rolling and cold drawing) production of high-tech tube and pipe for the Nuclear, Aerospace, Shipbuilding and Defence industries. A wide range of special materials were produced, including production of Zirconium tube.
Due to our long experience in manufacturing of tubes for special applications and highly skilled technical personnel we can produce high quality products according to the most exacting standards and with very tight tolerances.
OSCAR Production Group continues this tradition by investment in new innovations to maintain a leading position in the manufacture of tubes and pipes for special applications.
PRODUCTION FACILITIES
OSCAR Production Groups cold drawing and forming plant has a very large capacity. The plant is a huge 1.4 million square feet, equipped with 60 units of rolling equipment including 10 cold pilger mills, 41 tube rolling mills of roller design and 9 drawing mills.In addition to the large cold drawing and forming capacity OSCAR Production Group has a hot extrusion workshop containing hot extrusion Presses of 1600 tonnes and 500 tonnes. This hot working facility provides OSCAR Production Group with an ability to manufacture its own Mother Tube and in addition to produce heavy walled tubes for special applications. Hot extruded round bars can also be produced at this facility.
Technical capabilities of OSCAR Production Group are comparable to simalar facilities of world leading manufacturers of high tech tubular products.
3
TITANIUM ALLOYSNICKEL ALLOYS
STAINLESS STEEL
AEROSPACE NUCLEAR POWER
SHIPBUILDINGCHEMICAL/PETROCHEMICAL
PROCESS ENGINEERINGOFFSHORE INDUSTRY
TYPES AND DIMENSIONS
PRODUCTION RANGE
COLD DRAWN SEAMLESS TUBES0.3 mm - 133 mm outside diameter (0.01’’ - 5.23’’ outside diameter)
0.08 mm - 15 mm wall thickness (0.003’’ - 0.59’’ wall thickness)
COLD DRAWN SEAMLESS PIPESNPS 1/8’’- 4’’ SCH 5, 10, 40, 80
COLD DRAWN SEAMLESS RIBBED TUBES8 mm - 50 mm outside diameter (0.31’’ - 1.97’’ outside diameter)
0.4 mm - 2.5 mm wall thickness (0.015’’ - 0.098’’ wall thickness)
EXTREMELY THIN WALLED TUBES
HOT PRESSED TUBES & PIPES60 mm - 114,3 mm outside diameter (2.4’’ - 4.5’’ outside diameter)
7 mm - 20 mm wall thickness (0.27’’ - 0.79’’ wall thickness)
ROUND BARS from titanium, nickel alloys and stainless steels Ø 31,75 - 114,3 mm (1.25’’ - 4.5’’).
TUBES DIMENSIONS
WALL THICKNESSmm 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 15 20
mm inch 0,0039 0,0079 0,0118 0,0157 0,0197 0,0236 0,0276 0,0315 0,0354 0,0394 0,0591 0,0787 0,0984 0,1181 0,1378 0,1575 0,1772 0,1969 0,2165 0,2362 0,2559 0,2756 0,2953 0,3150 0,3346 0,3543 0,3740 0,3937 0,5906 0,7874
OU
TSID
E D
IAM
ETER
0,3 0,012
0,5 0,020
0,8 0,031
1,5 0,059
2 0,079
3 0,118
4 0,157
5 0,197
10 0,394
15 0,591
20 0,787
25 0,984
30 1,181
35 1,378
40 1,575
45 1,772
50 1,969
55 2,165
60 2,362
65 2,559
70 2,756
75 2,953
80 3,150
85 3,346
90 3,543
95 3,740
100 3,937
105 4,134
110 4,331
115 4,528
120 4,724
125 4,921
130 5,118
TITANIUM ALLOYSNICKEL ALLOYSSTAINLESS STEEL
AEROSPACE NUCLEAR POWERSHIPBUILDINGCHEMICAL/PETROCHEMICALPROCESS ENGINEERINGOFFSHORE INDUSTRY
4
GRADES AND STANDARDS
OUR PLANT IS ABLE TO PRODUCE TUBULAR PRODUCTS ACCORDING TO GOST AND TU (TECHNICAL CONDITIONS) UPON CUSTOMER’S REQUEST.
TITANIUM ALLOY SEAMLESS TUBE, PIPE & BARS
MATERIAL UNS No W.N.ASTM B/ ASME SB
DIN/EN AMS
Gr.1 R50250 Ti1 3.7025 338, 861, 34817861, Vd TUV
WB 230/2
Gr.2 R50400 Ti2 3.7035 338, 861, 34817861, Vd TUV
WB 230/24942
Gr.3 R50550 Ti3 3.7055 338, 861, 34817861, Vd TUV
WB 230/2
Gr.5 R56400 Ti6Al4V 3.7165 861, 348
Gr.5ELI(Gr.23) R56401 Ti6Al4VELI 3.7165 F136ELI
Gr.7 R52400 Ti2Pd 3.7235 338, 861, 348,17861,Vd TUV
WB 230/2
Gr.9 R56320 Ti3Al2.5V 3.7195 338, 861, 348, 178614943, 4944, 4945, 4946,
AS 5620
Gr.11 R52250 Ti1Pd 3.7225 338, 861, 348,
Gr.12 R53400 TiNi0.8Mo0.3 3.7105 338, 861, 348,
NICKEL ALLOY SEAMLESS TUBE & PIPE
MATERIAL UNS No W.N.ASTM B/ ASME SB
DIN/EN AMS
ALLOY 200 N02200 Ni99.2 2.4066 163, 161
ALLOY 201 N02201 LC_Ni99 2.4068 163, 161
ALLOY C22 N06022 NiCr21Mo14W 2.4602 622
ALLOY C276 N10276 NiCr16Mo15W 2.4819 622
ALLOY 59 N06059 NiCr23Mo16Al 2.4605 622
ALLOY 600 N06600 NiCr15Fe 2.4816 163, 167 17751
ALLOY 601 N06601 NiCr23Fe 2.4851 163, 167 17751
ALLOY 625 N06625 NiCr22Mo9Nb 2.4856 444, 829 17751 5581 Type 1
ALLOY 718 N07718 NiCr19NbMo 2.4668 444 17751 5589
ALLOY 800 N08800 X10NICrAlTi33-20 1.4876 163, 407 17459
ALLOY 800H N08810 X5NiCrAlTi31-20 1.4958 163, 407 17459
ALLOY 825 N08825 NiCr21Mo 2.4858 163, 423 17751
STAINLESS STEEL SEAMLESS TUBE & PIPE
MATERIAL UNS No W.N.ASTM А/ ASME SA
DIN/EN AMS
TP304 S30400 X5CrNi18-10 1.4301 213,269,312 10216-55560, 5567
Type 1
TP304H S30409 X6CrNi18-10 1.4948 213,269,312 10216-5
TP304L S30403X2CrNi19-
11X2CrNi18-91.4306 1.4307
213,269,312 10216-5
TP304LN S30453 X2CrNiN18-10 1.4311 213,269,312 10216-5
TP310S S31008 X12CrNi25-21 1.4845 213,269,312
TP316 S31600 X5CrNiMo17-12-2 1.4401 213,269,312 10216-5 5573
TP316H S31609 X6CrNiMo17-13 1.4919 213,269,312 10216-5
TP316L S31603 X2CrNiMo17-12-2 1.4404 213,269,312 10216-5
TP316LN S31653 X2CrNiMoN17-11-2 1.4406 213,269,312
TP316Ti S31635 X6CrNiMoTi17-12-2 1.4571 213,269,312 10216-5
TP317 S31700 X5CrNiMo17-13-3 1.4449 213,269,312 10216-5
TP321 S32100 X6CrNiTi18-10 1.4541 213,269,312 10216-55557, 5570
Type 1
TP321H S32109 X6CrNiTi18-10 1.4941 213,269,312 10216-5
TP347 S34700 X6CrNiNb18-10 1.4550 213,269,312 10216-5 5571
TP904L N08904 X1NiCrMoCuN25-20-5 1.4539 213,269,312 10216-5
ALLOY 254 S31254 X1CrNiMoCuN20-18-7 1.4547 213,269,312 10216-5
Duplex F51/F60 S31803/S32205 X2CrNiMoN22-5-3 1.4462 789, 790 10216-5
Superduplex F53 S32750 X2CrNiMoN25-7-4 1.4410 789, 790 10216-5
5
TITANIUM ALLOYSNICKEL ALLOYS
STAINLESS STEEL
AEROSPACE NUCLEAR POWER
SHIPBUILDINGCHEMICAL/PETROCHEMICAL
PROCESS ENGINEERINGOFFSHORE INDUSTRY
QUALITY AND CERTIFICATION
QUALITY CONTROL
OSCAR PRODUCTION GROUP QUALITY CONTROL DEPARTMENT GUARANTEES COMPLIANCE TO ALL
INTERNATIONAL STANDARDS AND SPECIFICATIONS
OSCAR Production Group has highly skilled technical personnel and fully equipped laboratories to perform any
test or inspection upon customer’s request. There are a metallurgy laboratory and department for non-destructive
test and inspection. All tests and inspections are carried out in accordance with both domestic and International
standards for all tubular and bar products. We provide incoming raw material control, so traceability is ensured
and high quality control is guaranteed.
Our products are used in different industries with severe process applications such as the Nuclear Power,
Aerospace, Chemical and Petrochemical, Oil & Gas, Off-Shore, Shipbuilding, Process Engineering, Space and
Defense industries. Therefore product quality is controlled at all stages of production, right up to shipment
of finished tubes. All technological processes are controlled and monitored and results of direct instrumented
measurement and calibration are recorded and kept on sile.
OSCAR Production Group provides the following types of quality control:
Visual inspection of external and internal surfaces with usage of optical equipment facilities
Instrumented measurement of geometrical dimensions
Instrumented control for estimation of the quality of external and internal surfaces, metal density and
microstructure analysis
Measurements of tube surface roughness, measurements of dimensions and wall thickness over the entire
tube length
Steeloscopes (for Alloys), chemical and spectral analysis for steel and alloy grade control
Independent Third Party inspection upon customer’s request
OSCAR Quality management system is certified in accordance with EN ISO 9001: 2008, PED 97/23/EC and AD 2000-Merkblatt W0, EN 9100:2009. The mill has NORSOK M-650 and NADCAP certification.
C E R T I F I C A T E
Management system as per EN 9100 : 2009(technically equivalent to AS9100C and JIS Q 9100 : 2009)
In accordance with TUV NORD CERT procedures and the EN 9104-001 : 2013, it is hereby certified that
OSCAR Production Group Ltd. 500 off. 2 Ekaterinoslavskiy boulevard Dnepropetrovsk, 49044 Ukraine
0SCA31ИГТГШ-М
Details of certification structure "Campus" according to the annex
applies a management system in line with the above standard for the following scope
Development of technology, manufacture and supply of hot-deformed and cold-deformed seamless tubes from stainless, high-alloy, alloy steels and titanium-base, nickel-base alloys
Certificate Registration No. 44 117 117580 Valid from 2014-04-16Audit Report No. 3513 3346 Valid until 2017-04-15
Ceefication Body Essen, 2014-04-16at H lV NORD CERT GmbH
This certification was conducted in accordance with the TUV NORD CERT auditing and certification procedures and is subject to regular surveillance audits.
TUV NORD CERT GmbH Langemarckstrasse 20 45141 Essen www.tuev-nord-cert.com
((DAkkSDeutscheAkkred itie rungsste lleD-ZM -12007-01-02
TUV NORD CERT GmbH is accredited byDAkkS/BDLl within the ICOP-scheme.
C E R T I F I C A T E ЯЯЯЮЛ®
Management system as per DIN EN ISO 9001 : 2008
In accordance with TUV NORD CERT procedures, it is hereby certified that
OSCAR Production Group Ltd. 500 off. 2 Ekaterinoslavskiy boulevard Dnepropetrovsk, 49044 Ukrainewith the sites according to the annex
applies a management system in line with the above standard for the following scope
Development of technology, manufacture and supply of hot-deformed and cold-deformed seamless tubes from stainless, high-alloy, alloy steels and titanium-base, nickel-base alloys
Certificate Registration No. 44 100 117580 Valid until 2017-04-15Audit Report No. 3513 3346
/6 Л 0 .ОCertification Body Essen, 2014-04-16at TLJV NORD CERT GmbH
This certification was conducted in accordance with the TUV NORD CERT auditing and certification procedures and is subject to regular surveillance audits.
TOV NORD CERT GmbH Langemarckstrasse 20 45141 Essen www.tuev-nord-cert.com
OSCAR
TG A-ZM -07-06-Q 0
OSCAR Production Group takes deep concern in customer service and reliability. Therefore, we offer our customers a wide rangeof high quality tubular products and are ready to produce small production runs from different alloys. OSCAR Production Group can provide flexible quantities upon request: from hundred meters up to thousands of meters.
Disclaimer: «Whilst we hope you will find the contents of this brochure interesting and informative, the contents are for general information purposes only and do not constitute advice. We believe the contents to be true and accurate as for the date of writing but can give no assurances or warranty regarding the accuracy, currency or applicability of any of the contents in relation to specific situations and particular circumstances. As such, the contents should be not relied upon, and readers should not act upon this information without prior appropriate professional advice. This brochure is not intended to be a source for advice, and thus the reader should not rely on any information provided hereinafter as such. Readers should always seek advice of an appropriately qualified person about matters they are concerned with. OSCAR Production Group assumes no responsibility for information contained in this brochure and disclaims all liability in respect of such information.”
TITANIUM ALLOYSNICKEL ALLOYSSTAINLESS STEEL
AEROSPACE NUCLEAR POWERSHIPBUILDINGCHEMICAL/PETROCHEMICALPROCESS ENGINEERINGOFFSHORE INDUSTRY
6
CUSTOMER SERVICE
CUSTOMER SERVICE
ТРУБНЫЙ ЗАВОД
АТОМНАЯ ЭНЕРГЕТИКААЭРОКОСМИЧЕСКАЯ ПРОМЫШЛЕННОСТЬКОРАБЛЕСТРОЕНИЕХИМИЧЕСКАЯ ПРОМЫШЛЕННОСТЬМАШИНОСТРОЕНИЕ
ТИТАНОВЫЕ СПЛАВЫНИКЕЛЕВЫЕ СПЛАВЫ
НЕРЖАВЕЮЩИЕ СТАЛИ
АТОМНАЯ ЭНЕРГЕТИКААЭРОКОСМИЧЕСКАЯ ПРОМЫШЛЕННОСТЬКОРАБЛЕСТРОЕНИЕХИМИЧЕСКАЯ ПРОМЫШЛЕННОСТЬМАШИНОСТРОЕНИЕ
ТИТАНОВЫЕ СПЛАВЫНИКЕЛЕВЫЕ СПЛАВЫ
НЕРЖАВЕЮЩИЕ СТАЛИадрес: Екатеринославский бульвар, д. 2, 5 этаж, оф. 500Днепропетровск, 49000, Украинател./факс: +380 56 770 1234e-mail: [email protected]
www.oscar-tube.com
SALES AND ADMINISTRATION
OSCAR PG LTD 1 Sobinova str., Dnipro, 49083, UKRAINEtel: +38 056 770 1234e-mail: [email protected]
PRODUCTION AND TECHNOLOGY
OSCAR PG LTD Tube Drawing Workshop56 Trubnikov Avenue, Nikopol, 53201, Dnipropetrovsk region, UKRAINE tel: +38 056 663 9830 e-mail: [email protected]
OSCAR PG LTD Tube Pressing Workshop1a Pisarzhevskogo str., Dnipro, 49000, UKRAINE tel: +38 056 732 0861 e-mail: [email protected]
REPRESENTATION AND DISTRIBUTION
OSCAR PG UK LTD (World)60 Larchmont Road, Leicester, England, LE4 OBE, UKtel: +4420 3769 1769 # 1421e-mail: [email protected]
CORROTHERM INTERNATIONAL FZCO (Middle East) Building 5E-B No 636, PO Box 293710, Dubai Airport Free Zone, Dubai, UAEtel: +971 4 701 7454 e-mail: [email protected]
KIND MATERIALS GMBH (Germany)Kaiserau 8, 51789, Lindlar, Germany tel: +49 2261 60 33 54e-mail: [email protected]
VENUS INTER-TRADE AGENCIES (India)505 Majestic Shopping Centre,144 J.S.S Road, Mumbai, 400004, Indiatel: +91 22 238 988 01e-mail: [email protected]
04/2017