Transcript
Page 1: LV live feeder and phase identifier

LV Live Feeder and Phase Identifier FC3000

Page 2: LV live feeder and phase identifier

LV Live Feeder and Phase Identifier FC3000

Page 3: LV live feeder and phase identifier

Line Unit leadsCentral Unit leads

Heavy duty case

Illustrated operating instruction in the lid Display on LCD screen with

a choice of many languages

Fuse protection on Central Unit (CU) and Line Unit (LU)

Fused leads

Fuse leads

Up to 12 Circuits/feeders

IP2X probes

LV Live Feeder and Phase Identifier FC3000

Page 4: LV live feeder and phase identifier

■ Functions of the LV Live Feeder and Phase Identifier

This device can be used by a single operator for mapping customer phase and feeder connection in 5 seconds.

Which are compulsory information to enable Smart Meters communication. Applications : Helps to balance the

loads on the phases of the low voltage network.

Simple to use : The Central Unit (CU) is connected to all the outgoing lines on a supply substation. The Line Unit (LU), connected to any points of the network (customer, connection box, …), automatically provides you with all the useful information : Local voltage measurement

Phase indication : L1, L2 or L3 Feeder or circuit : From 1 to 6 (9 or 12) Substation (CU code) : Form 1 to 8 Didactic operating mode on the Central

Unit Category IV device protected by HRC fuses Insulated connection accessories Built-in self-test Thanks to the CU unit code it is possible to

use simultaneously several CUs located in several substations.

LV Live Feeder and Phase Identifier FC3000

Page 5: LV live feeder and phase identifier

■ Specifications of the LV Live Feeder and Phase Identifier

Central Unit FC3000 UC Nominal voltage (phase-neutral) : 115 Vrms to 230

Vrms 200 Vrms to 400 Vrms between phases Maximum rated voltage : 440 Vrms (between phases, and

between phase en neutral) Minimum operating voltage : 200 Vrms between phases Network frequency : 50 or 60 Hz Input plugs L1-L2-L3-Neutral : Ø 4mm male IP2X (at the end

of the power lead) Functions : automatic and manual modes menus available in

6 languages Inputs protection : fast-acting HRC fuses in the housing and

at the leads connecting points Overvoltage category : 1000 V – Cat. IV Enclosure protection : IP51 (IP67 in closed case) Dimensions : 300 x 230 x 85mm Weight : 2.35 kg Detection coils : 6 for FC30006, 9 for FC30009, 12 for

FC300012 Identification : by colour coded ring (s) Loop diameter : Ø 120 mm

Line Unit : FC3000 UL Nominal voltage : 230 Vrms (between phase and neutral

terminals) Power supply : 4 alkaline batteries 1.5 V AA Autonomy : over 1000 detections Inputs protection : fast-acting HRC fuses in the housing and at

the IP2X leads connecting points Overvoltage Category : 1000 V – Cat. IV Enclosure protection : IP54 Approximate dimensions : 250 (235) x 130 x 65 mm Protection : shockproof rubber-type shell case Weight : 1.4 kg with shell case, lead, test probes and alligator

clips Complete unit

• Synthetic carry and storage case, IP67 when closed• Operating temperature : from 0°C to + 40°C / Hygrometry <

90 % non condensing.• Storage and transport temperature : from -20°C to + 70°C.

LV Live Feeder and Phase Identifier FC3000

Page 6: LV live feeder and phase identifier

■ Standard and Environment

CE marking: Compliant with European Directives EMC Directive (Electro Magnetic Compatibility) 89/336/EEC, 92/31/EEC,

93/68/EEC et 92-587/RF, 95-283/RF, standard EN 55011 edition 2009 + A1/2010

Low Voltage Safety Directive (Safety of low-voltage equipment ) 73/23/EEC et 75-848/RF standard IEC/EN 61010-1 ed. 3.0 (2010-06) IEC/EN 61010-031 ed.1.1 (2008-06)

LV Live Feeder and Phase Identifier FC3000

Smart Meter friendlyNo perturbations for CLC signalsCompliant with standard requirements EN

50065-1 edition 07-2012

Page 7: LV live feeder and phase identifier

All our products help utilities to face global challenges providing high safety level for electrical network improvement operations:Preparation / safetyEfficiency / Availability

THE NETWORK WILL CHANGE !

Page 8: LV live feeder and phase identifier

THE NETWORK WILL CHANGE !

Page 9: LV live feeder and phase identifier

THE NETWORK WILL CHANGE !

Page 10: LV live feeder and phase identifier

Work in total confidence

with your powernetwork

Page 11: LV live feeder and phase identifier

HISTORY & FIGURES

1949: creation of the company to supply earthing devices to “compagnie du Rhin”

1960: creation of the French LiveW competence Center (SERECT) in Mulhouse

1989: building of this building specialy designed around high voltage laboratory

1998: integration in Novarc Group 4800 m², 3500 references, TOP80% 1500 ref / 40 products 330 suppliers, 2M components, 200k end products ISO 9002 in 1996, ISO 9001 since 2002 Export rate > 65% in more than 100 countries

Page 12: LV live feeder and phase identifier

For Sales: [email protected]


Recommended