Benefits
• Applies Premium Synthetic Lubricating Oil• Lubricates up To Five Application Points• Only Utility Required is Dry Compressed Air• Equipped with Air Regulator, Mist Pressure Gauge and Return Pressure Gauge• Durable Cast Aluminum Body with Oil Level Sight Glass
• Electrical Power is Not Required• Based on LSC LubriMist® Closed-Loop Oil Mist Technology• Texas A & M University Paper Titled - “Tribological Performance Of OIl Mist Lubrication,1994” L10 Bearing Life
• Provides Superior Lubrication For Rotating Equipment• Constantly Delivers Clean Oil• Lubricant Contained, Recirculated and Reused• Pressurizes Bearing Housings, Keeping Water Vapor and Other Contaminant’s Out• Easily Installed and Maintained • For Indoor and Outdoor Use
THE LEADER IN OIL MIST TECHNOLOGY
LubriMate® Miniaturized Environmentally Clean Lubricator...A New Concept In Circulating Lubrication Systems.
INCREASES BEARING LIFE UP TO 6 TIMES
Design Features
Notes
LubriMate ® Provides Outstanding Reliability... It Has No Moving Parts.
O1
O1
FULL
ADD OIL
LMate PS 77-740-213Rev. 0, 4/1998
LubriMate®
Environmentally Clean Lubricator
LEGEND 1 COALESCING FILTER 2 RETURN PRESSURE GAUGE 3 VORTEX OIL MIST GENERATING HEAD 4 MIST SUPPLY PRESSURE GAUGE 5 MIST OUTLET -1/4” NPT - 5 PLACES 6 1.5 GALLON RESERVOIR 7 OIL LEVEL SIGHT GLASS 8 RESERVOIR DRAIN 9 FILL PORT 10 AIR PRESSURE REGULATOR AND FILTER 11 MIST RETURN 1/4” NPT 5 PLACES (back side) 12 REMOVABLE OIL SUCTION SCREEN
INSTALLATION KIT INCLUDES:• 1 LubriMate® UNIT• 20 TUBE FITTINGS• SS MIST RECLASSIFIERS• 50 FT. 1/4” PLASTIC TUBING FOR
OIL MIST SUPPLY LINES• 50 FT. 3/8” PLASTIC TUBING FOR OIL AND MIST RETURN LINES• 2 GALLONS SYNTHETIC OIL• INSTALLATION AND OPERATION MANUAL
15”
16 1/2”
15”
FRONT VIEWSIDE VIEW
1
2
4
9
78
5
10
12
11
6
3
FOR SALES, 24 HOUR SERVICE OR TECHNICAL INFORMATION;
P.O.Box 19294HOUSTON, TEXAS 77224-9294
713.464.6266 • FAX 713.464.9871 • 1 [email protected] • www.lsc.com
6”
LMate PS 77-740-213Rev. 0, 4/1998
LubriMate®
Industry Application Equipment Examples
OIL MIST PRESERVATION OF A 15,000HP ELECTRIC MOTOROil mist is applied to the motor bearings in storage to protect them from contaminants and corrosion. A building was constructed specifically to house this very important motor for a chemical plant in the Houston, Texas area. Rail tracks were installed to move the motor out of the building quickly if it is needed. If this motor were not available in the plant and ready for service the facility would lose thousands of dollars waiting for their failed motor to be repaired.
The LubriMate® Oil Mist System was selected to apply mist to the bearings and recover the stray mist and coalesced oil to
insure a clean environment for the storage area. Also the LubriMate® is a closed loop system so the unit does not require daily maintenance to refill the reservoir.
OIL MIST ON TEST STANDOil mist is applied to the bearings of a pump on test at Pompe Gabioneta manufacturing plant in Milan Italy. Overhung and Between Bearing pumps were tested with the portable LubriMate® Oil Mist Generator. The LubriMate® unit comes as a kit with all necessary reclassifiers, tubing, fittings and test oil.
The LubriMate® Oil Mist System was selected to apply mist to the bearings and recover the stray mist and coalesced oil to insure a clean environment for the test area. Also the LubriMate® is a closed loop system so the unit does not require daily maintenance to refill the reservoir.
LubriMate®
Industry Application Equipment Examples
OIL MISTON GOULDS PROCESS PUMPThis remote pump runs intermittently when needed to empty a tank. The average life of the bearings was 3 months with sump lubrication. After 1 year of lubrication with a LubriMate® no bearings have failed. Luboil 100 was selected for this application.
Heated Roll used to form Synthetic Fibers
Dienes Apparatus Inc. of Pineville, North Carolina manufactures Godets and uses LubriMates® to lubricate the two motor bearings. The newer Godets have built-in reclassifiers ready for connecting to an oil mist system. The Godets are mounted in a housing in set of 3 to 8 and are referred to as a position. The rolls turn at 3,000 to 10,000 RPM.
GODET
Electric Motor Driver