Looking for Aluminum?
| Alcobra has the non-ferrous metal you're looking for.
Welcome to Alcobra! We will support you with a full service for the procurement and logistics
of semi-finished, non-ferrous metal products. Our aim is to offer individual solutions to meet
your needs - with fast delivery times and a range of stock that only a major international
trading company could offer.
• Quick response: prompt service and fast delivery times
• Well assorted: standard and special aluminum,
copper and brass alloys in many sizes
• High quality: certified materials of high grade
• Well connected: excellent contacts to European and worldwide suppliers
• Competent: experienced staff on site in Bremen and an excellent network
of specialists in all areas of procurement, technology and processing
Alcobra takes care of that part of the production process, beyond supply, you want to
outsource. Processing, storage, just-in-time delivery: With Alcobra you get the flexibility
you need.
Table of ConTenTs
Company Profile Page 2
aluminium sheets (en aW 1050) Page 4
aluminium Coils / Plates (en aW 1050, 5754) Page 5
aluminium sheets / Plates (en aW 5754) Page 6+7
aluminium sheets / Plates - supersize (en aW 5083, 5754) Page 8+9
aluminium sheets / Plates (en aW 5083) Page 10+11
aluminium sheets / Plates (en aW 6082) Page 12+13
aluminium sheets / Plates (en aW 7075 / Hokotol) Page 14+15
aluminium sheets / Plates casted / machined (en aW 5083) Page 16-19
aluminium sheets / Plates (en aW 2017) Page 20+21
alloy overview / special alloys Page 22+23
aluminium sheets / Plates (en aW 3003, 3005, 5005) Page 24+25
Coated sheets (en aW 3003) Page 26+27
aluminium Treadsheets / Ricecorn (en aW 5754) Page 28+29
aluminium bars Round - Drawn (en aW 2007, 2011, 7075) Page 30+31
aluminium bars Round - extruded (en aW 2007, 2011, 2014, 5083, 5754, 6060, 6082, 6262, 7075) Page 32+33
aluminium bars Round - Casted / bulbprofiles (en aW 2007, 5083, 6082, 7075) Page 34
aluminium bars square / Hexagonal (en aW 2007, 2011, 6060, 6082, 6262) Page 35
aluminium Profiles anodized (en aW 6060, 6063 / 20 microns) Page 36
aluminium flatbars (en aW 2007, 6060, 6082) Page 37
Gangway Profiles (en aW 6060, 6063) Page 38
aluminium U / T - sections (en aW 6060, 6082) Page 40
aluminium angles (en aW 6060, 6082) Page 41
aluminium Tubes Round (en aW 6060, 6082) Page 42+43
aluminium Tubes Round - Roller Tubes (en aW 6060) Page 44+45
aluminium Tubes Round - Cylinder Tubes (en aW 6060) Page 46+47
aluminium Tubes -square / Rectangular (en aW 6060, 6082) Page 48
fittings (en aW 6060, 6063) Page 49
aluminium special Profiles (en aW 6060, 6063, 6082) Page 50+51
alloy Colour Marks / Machining Page 52+53
Technical Information Page 54-66
Terms of sale and Delivery Page 67
Edition 03/12
4
Aluminum SheetS/PlAteS / Aluminum CoilS
aluminum sheets - stucco - en aW-1050 aen 573-3, 485-1, 485-2, 485-4
Stucco
Thickness mm Kg/pcs. 1000 x 2000 mm Kg/pcs. 1250 x 2500 mm0.8 4.4 •
1.0 5.4 • 8.5 •
1.5 8.1 12.7 •
alloy en aW-1050 a H14 stucco in coils of approx. 500 kg. ID: 508 mm.
0.70 x 1000 mm 1.00 x 1000 mm
alloy en aW-1050 a H14 stucco in coils of approx. 250 kg. ID: 508 mm.
0.80 x 1000 mm
Chemical Composition: en aW-1050 a - en 573-3: 2009
Mechanical Properties: 485-2: 2008
For more information see page 54 - 66
special Characteristics:
aluminum sheets - en aW-1050 a en 573-3, 485-1, 485-2, 485-3, 485-4
* Stocked in deep drawn quality (DDQ). All sheets/plates can be supplied with PE-foil.
Thickness
mm
Kg/pcs. 1000 x 2000 mm Kg/pcs. 1250 x 2500 mm Kg/pcs. 1500 x 3000 mm
o/H111H14/H24 o/H111
H14/H24 o/H111
H14/H24
0.5 2.7 • 4.3 •
0.6 3.3 •
0.7 3.8 • 5.9 • 8.5 •
0.8 4.3 • • 6.7 • 9.6 •
1.0 5.4 * • • 8.5 • 12.2 •
1.25 6.8 * • • 10.6 * • • 15.2 •
1.5 8.1 * • • 12.7 * • • 18.3 •
2.0 10.8 * • • 17.0 * • • 24.3 •
2.5 13.5 • • 21.1 • 30.5 •
3.0 16.2 • 25.4 • 36.6 •
4.0 21.6 • 34.0 • 48.8 •
5.0 27.0 • 42.2 • 61.0 •
6.0 32.4 • 49.9 • 72.9 •
si fe Cu Mn Cr Zn Ti others al0.25 0.4 0.05 0.01 0.01 0.07 0.05 0.03 99.5
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.O/H11 0.5-12.5 65 95 20 22-35 20
H14 0.5-12.5 110 150 90 3-6 34
H24 0.5-12.5 110 150 90 4-8 33
H112 6.0-12.5 75 110 30 20 23
Corrosion resistance suitability for anodizing Weldability
Good Not suited for anodizing Excellent
5
aluminum Coils for insulating
All stated weights are theoretical weights, which may vary.
aluminum Plates - en aW-1050 a en 573-3, 485-1, 485-2, 485-3, 485-4
Thickn.
mm
Kg/pcs.
1000 x 2000 mm Kg/pcs.
1250 x 2500 mm Kg/pcs.
1500 x 3000 mm Kg/pcs.
1000 x 3000 mm
o/H111 o/H111 o/H111 o/H111
8.0 43.2 • 67.5 • 97.2 •
10.0 54.0 • 84.4 • 121.5 •
12.0 64,8 • 101.3 • 145.8 •
15.0 81.0 • 126.6 • 187.5 •
20.0 108.0 • 168.8 • 243.0 •
30.0 162.0 • 388.0 •
40.0 319.2 •
50.0 399.0 •
60.0 478.8 •
alloy en aW-3103/3003in coils of 250/1000 kg.ID= 500 mm.
en 573-3, 485-1,485-2, 485-4
0.63 x 1000 mm 0.75 x 1000 mm
0.88 x 1000 mm 1.00 x 1000 mm
alloy en aW-5052in coils of 250/500 kg.ID= 500 mm.
en 573-3, 485-1,485-2, 485-4
0.63 x 1000 mm 0.75 x 1000 mm
0.88 x 1000 mm 1.00 x 1000 mm
All stated weights are theoretical weights, which may vary.
All stated weights are theoretical weights, which may vary.
aluminum Coils - en aW-1050 aen 573-3, 485-1, 485-2, 485-4
aluminum Coils - en aW-5754en 573-3, 485-1, 485-2, 485-4
Thicknessmm
Kg/m2 1000 mm 1250 mm 1500 mmH111/0 H14/H24 H111/0 H14/H24 H111/0 H14/H24
0.7 1.9 • • •
0.8 2.2 • • •
1.0 2.7 • • • • •
1.2 3.2 • • • •
1.5 4.1 • • • •
2.0 5.4 • • • • •
2.5 6.8 • • • •
3.0 8.1 • • • •
Thicknessmm
Kg/m2 1000 mm 1250 mm 1500 mmH111 H22 H111 H22 H111 H22
0.7 1.9
0.8 2.2 • • • •
1.0 2.7 • • • • • •
1.2 3.2 • • • • • •
1.5 4.1 • • • • • •
2.0 5.4 • • • • • •
2.5 6.8 • • • • • •
3.0 8.1 • • • • • •
6
Aluminum SheetS/PlAteS
aluminum Plates - sea water-resistant - en aW-5754 “special flatness”en 573-3, 485-1, 485-2, 485-3
aluminum sheets/Plates - en aW-5754
Chemical Composition: en aW-5754 - en 573-3: 2009
special Characteristics:For more information see page 54 - 66
Mechanical Properties: 485-2: 2008
si fe Cu Mn Mg Cr Zn others al
0.4 0.4 0.1 0.5 2.6-3.6 0.3 0.2 0.4 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.O/H11 0.5-12.5 190 240 80 14-18 52
O/H11 12.5-100 190 240 80 17 52
H112 12.5-25 200 120 10 58
H22/32 0.5-12.5 220 270 130 8-10 63
H24/34 0.5-12.5 240 280 160 6-10 70
Corrosion resistance suitability for anodizing Weldability
Excellent Good Excellent
Thick-nessmm
Kg/pcs.
8 x 1000 x 2000 mm10-60 x 1020 x 2020 mm
Kg/pcs.
8 x 1500 x 3000 mm10-60 x 1520 x 3020 mm
”special flatness”
H111 H111
8.0 43.2 • 97.2 • • Extra straightened plates
10.0 55.7 • 124.2 • • Better planeness
12.0 66.8 • 149.1 • max. 0.15 per 100 mm
15.0 83.5 • 186.3 • • Tension annealed
20.0 111.3 • 248.4 • • Less tensions
25.0 139.1 • 310.5 • • Superior surface
30.0 166.9 • 372.6 • • Superior thickness tolerance
40.0 222.5 • 496.8 • • Also supplied cut to length
50.0 279.0 • 621.0 •
60.0 334.0 • 746.0 •
Thicknessmm
Kg/m2 2000 x 4000 mm
H22 H111
2.0 21.6 • •
3.0 32.4 • •
7
aluminum sheets/Plates - sea water-resistant - en aW-5754en 573-3, 485-1, 485-2, 485-3, 485-4
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
Thicknessmm
Kg/pcs. 0.5-6 x 1000 x 2000 mm8-60 x 1020 x 2020 mm
Kg/pcs.
0.7-6 x 1250 x 2500 mm8-30 x 1270 x 2520 mm
Kg/pcs. 1-6 x 1500 x 3000 mm8-140 x 1520 x 3020 mm
H22/32 H112/H111 H22/32 - H24/34 H112/H111 H22/32 H112/H111
0.5 2.7 •
0.7 3.8 • 5.9 •
0.8 2.2 • • 6.7 • 9.6 •
1.0 5.4 • • 8.5 • • 12.2 • •
1.2 6.5 • • 10.2 • • •
1.5 8.1 • • 12.7 • • 18.3 • •
2.0 10.8 • • 17.0 • • 24.3 • •
2.5 13.5 • • 21.1 • • 30.5 • •
3.0 16.2 • • 25.4 • • 36.6 • •
4.0 21.6 • • 34.0 • • 48.8 • •
5.0 27.0 • • 42.2 • • 61.0 • •
6.0 32.4 • • 50.6 • • 72.9 • •
8.0 44.5 • 69.2 • 99.4 •
10.0 55.7 • 86.4 • 124.2 •
12.0 66.8 • 103.7 • 149.1 •
15.0 83.5 • 129.6 • 186.3 •
20.0 111.3 • 172.8 • 248.4 •
25.0 139.1 • 216.0 • 310.5 •
30.0 166.9 • 259.2 • 372.6 •
*35.0 194.7 • 434.7 •
40.0 222.5 • 496.8 •
50.0 279.0 • 621.0 •
60.0 334.0 • 746.0 •
70.0 893.0 •
80.0 1020.0 •
90.0 1148.0 •
100.0 1276.0 •
120.0 1531.0 •
140.0 1658.0 •
8
Aluminum SheetS/PlAteS
Chemical Composition: en aW-5754 - en 573-3: 2009
Chemical Composition: en aW-5083 - en 573-3: 2009
For more information see page 54 - 66
Mechanical Properties: 485-2: 2008
For more information see page 54 - 66
Mechanical Properties - en 485-2: 2008
si fe Cu Mn Mg Cr Zn others al
0.4 0.4 0.1 0.5 2.6-3.6 0.3 0.2 0.4 Rest
si fe Cu Mn Mg Cr Zn others al
0.4 0.4 0.1 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.35 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.O/H111 0.5-12.5 190 240 80 14-18 52
H22/32 0.5-12.5 220 270 130 8-10 63
H24/34 0.5-12.5 240 280 160 6-10 70
GradeA 3-12.5 230 140 10-11 63
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.O/H111 3-12.5 275 350 125 15-16 75
O/H111 12.5-40.0 275 350 125 15 75
GradeA 3-12.5 305 220 10-12 89
H116 12.5-40.0 305 215 10 89
H116 40.0-80.0 285 200 10 83
9
aluminum sheets/Plates - sea water-resistant - en aW-5754 - »super-size«en 573-3, 485-1, 485-2, 485-3, 485-4
* Can be supplied with PE-film 1 side.
aluminum sheets/Plates - sea water-resistant - en aW-5083 - »super-size«en 573-3, 485-1, 485-2, 485-3, 485-4
All stated weights are theoretical weights, which may vary.
Thick-nessmm
Kg/pcs. 2000 x 4000 mm
Kg/pcs. 2000 x 6000 mm
Kg/pcs. 2000 x 8000 mm
Kg/pcs. 2400 x 6000 mm
Kg/pcs. 2400 x 8000 mm
3.0 97.2 •
4.0 130.0 • 156.0 •
5.0 162.0 •
6.0 195.0 • 260.0 • 234.0 • 311.0 •
7.0 227.0 •
8.0 260.0 • 415,0 •
10.0 324.0 •
12.0 264.4 • 389.0 •
15.0 330.5 • •
20.0 440.7 • •
25.0 551.0 •
30.0 661.0 • •
40.0 882.0 •
50.0 1102.0 •
Thicknessmm
Kg/pcs. 2000 x 5000 mm
Kg/pcs. 2000 x 6000 mm
3.0 81.0 * •
4.0 108.0 * • 130.0 * •
5.0 135.0 • 162.0 •
6.0 162.0 • 195.0 •
7.0 189.0 • 227.0 •
8.0 216.0 • 260.0 •
10.0 270.0 •
10
Aluminum SheetS/PlAteS
Chemical Composition: en aW-5083 - en 573-3: 2009
For more information see page 54 - 66
special Characteristics:
Mechanical Properties - en 485-2: 2008
si fe Cu Mn Mg Cr Zn others al
0.4 0.4 0.1 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.35 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.O/H111 0.2-6.3 275 350 125 11-15 75
O/H111 6.3-12.5 270 345 115 16 75
O/H111 12.5-80 270 345 115 14-15 73-75
O/H111 80.0-120.0 260 110 12 70
O/H111 120.0-200.0 255 105 12 69
Corrosion resistance suitability for anodizing Weldability
Excellent Protective anodizing Excellent
High tensile strength; particularly used in shipbuilding and
tank industries as well as for moulds in plastic and furniture industries
11
aluminum sheets/Plates - sea water-resistant - en aW-5083en 573-3, 485-1, 485-2, 485-3, 485-4
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
Can be supplied in thickness up to 750 mm.*) Can also be supplied in dimension 2000 x 4000 mm.Plates from 6 to 20 mm in thickness can be supplied with DNV-certificate.
All stated weights are theoretical weights, which may vary.
Thick-nessmm
Kg/pcs. 2-6 x 1000 x 2000 mm8-20 x 1020 x 2020 mm
Kg/pcs. 2-6 x 1250 x 2500 mm8-20 x 1270 x 2520 mm
Kg/pcs. 2-6 x 1500 x 3000 mm8-140 x 1520 x 3020 mm
150-220 x 1520 x 2800 mm
2.0 10.8 • 17.0 • 24.3 •
3.0 16.2 • 25.4 • 36.6 •
4.0 21.6 • 34.0 • 48.8 •
5.0 27.0 • 42.2 • 61.0 •
6.0 32.4 • 50.6 • 72.9 •
8.0 99.4 •
10.0 55.7 • 124.2 •
12.0 66.8 • 149.1 •
15.0 83.5 • 186.3 •
20.0 111.3 • 248.4 •
25.0 319.0 * •
30.0 382.8 * •
40.0 510.4 * •
50.0 638.0 * •
60.0 765.0 * •
70.0 855.0 •
80.0 994.0 •
100.0 1221.0 •
120.0 1531.0 •
130.0 1658.0 •
140.0 1786.0 •
150.0 1756.0 •
160.0 1873.0 •
180.0 2107.0 •
200.0 2341.0 •
220.0 2575.0 •
12
Aluminum SheetS/PlAteS
special Characteristics:
Chemical Composition: en aW-6082 - en 573-3: 2009
Mechanical Properties - en 485-2: 2008
For more information see page 54 - 66
aluminum Plates - en aW 6082 T651 “special flatness”en 573-3, 485-1, 485-2, 485-3
si fe Cu Mn Mg Cr Zn others al
0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 0.2 0.3 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.T4 1.5-12.5 205 - 110 12-15 58
T6151 12.5-175 275 - 200 8-12 81
T651 12.5-175 275-295 - 230-240 4-8 83-89
T651 1.5-6 310 - 260 6-10 91-94
Corrosion resistance suitability for anodizing Weldability
Good Good Excellent
High tensile strength
Particularly used in engineering and tooling industries for construction of moulds etc.
Thicknessmm
Kg/pcs. 8-30 x 1520 x 3020 mm “special flatness”
8.0 97.2 • • Extra straightened plates
10.0 124.2 • • Better planeness
12.0 149.1 • Max. 0.15 mm per 100 mm
15.0 186.3 • • Tension annealed
20.0 248.4 • • Less tensions
25.0 310.5 • • Superior surface
30.0 372.6 • • Superior thickness tolerance
• Also supplied cut to length
13
aluminum sheets/Plates - en aW-6082en 573-3, 485-1, 485-2, 485-3, 485-4
* Price is dimension dependent. All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary.
Thicknessmm
Kg/pcs.
0.5-6 x 1000 x 2000 mm8-20 x 1020 x 2020 mm
Kg/pcs.
2-6 x 1500 x 3000 mm8-180 x 1520 x 3020 mm
Kg/pcs.
200-300 x1000 x 3000 mm
0.5 2.7 •
0.8 4.4 •
1.0 5.4 •
1.5 8.1 •
2.0 10.8 •
2.5 13.5 •
3.0 16,2 •
4.0 21.6 •
5.0 27.0 • 61.0 •
6.0 32.4 • 72.9 •
8.0 44.5 • 99.4 •
10.0 55.7 • 124.2 •
12.0 66.8 • 149.1 •
15.0 83.5 • 186.3 •
20.0 111.3 • 248.4 •
25.0 310.5 •
30.0 372.6 •
35.0 460.0 * •
40.0 496.0 •
45.0 557.7 * •
50.0 621.0 •
60.0 746.0 •
65.0 806.0 * •
70.0 868.0 •
80.0 994.0 •
90.0 1116.0 * •
100.0 1245.0 •
110.0 1364.0 •
120.0 1488.0 •
130.0 1612.0 •
140.0 1736.0 •
150.0 1859.0 •
160.0 1983.0 •
180.0 2231.0 •
200.0 1620.0 •
250.0 2025.0 •
300.0 2475.0 •
14
Mechanical Properties:
Chemical Composition: HoKoTol
special Characteristics:
special Characteristics:
Chemical Composition: en aW-7075 - en 573-3: 2009
Mechanical Properties en 458-2: 2008
For more information see page 54 - 66
We can also offer: Sheets/plates, rings and roundels cut to length, also in small quantities.
si fe Cu Mn Mg Cr Zn others al
0.4 0.5 1.2-2.0 0.3 2.1-2.9 0.18-0.28 5.1-6.1 0.4 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.T651 1.5-12.5 540 - 460 6-8 160
T651 12.5-50.0 530 - 460 5-6 158
T651 90-100 460 - 360 3 135
T651 100-120 410 - 300 2 119
T651 120-150 360 - 260 2 104
Tensile strengthRm n/mm2
0.2% proof stressRp 0.2 n/mm2
elongation a50 mm a
brinell hardnessHbs
min. max. min. max. % min. % max.
550 500 - 4 - 160-180
Corrosion resistance suitability for anodizing Weldability
Acceptable Protective anodizing Acceptable
High tensile strength
Particularly used in engineering and tooling industries for construction of moulds etc.
Cu Mg Zn al2.1 2.0 6.2 Rest
Corrosion resistance suitability for anodizing Weldability
Acceptable Protective anodizing Acceptable
Hardness consistency, also in the centre of the plate. Extremely high tensile strength,
wear-resistant and forged. Particularly applicable in the tooling industry, for construction of moulds etc.
Aluminum SheetS/PlAteS
15
aluminum sheets/Plates - en aW-7075en 573-3, 485-1, 485-2, 485-3
All sheets/plates can be supplied up to and including 400 mm thickness, but we recommend HOkOTOL/ALUMOLD-1 thicker than 80 mm.
aluminum Plates - HoKoTol Tooling plates as alternative to tooling steel.en 485-3
All stated weights are theoretical weights, which may vary.Can be supplied up to 400 mm thickness.other dimensions available on demand.
Typical 0,2 % proof stress
Plate thickness
[ins.]
[mm]
12840
7075 T651
HOkOTOL
600
500
400
300
200
0 50 100 150 200 250 300 350
Rp
0,2
(LT,
s/2)
[MP
a]
10,90,8
120
0,70,60,50,40,30,20,10
80
100
140
160
180HOkOTOL
7075 T651
Thickness position
Hardness across a 300 mm (12”) thick plate
Har
dne
ss H
B 2
,5/1
87,5
Thicknessmm
Kg/pcs. 790 x 2200 mm
Kg/pcs. 1270 x 2520 mm
Kg/pcs. 1520 x 3020 mm
40.0 524.0 •
50.0 668.0 •
65.0 851.0 •
75.0 989.0 •
85.0 1112.0 •
90.0 1178.0 •
100.0 1309.0 •
110.0 1439.0 •
120.0 1570.0 •
130.0 1701.0 •
140.0 1832.0 •
150.0 1963.0 •
160.0 1449.0 •
180.0 1603.3 •
200.0 984.0 •
Thicknessmm
Kg/pcs. 1520 x 3020 mm
Thicknessmm
Kg/pcs. 1520 x 3020 mm
Thicknessmm
Kg/pcs. 1520 x 3020 mm
8.0 102.8 • 40.0 524.4 • 180.0 2397.0 •
10.0 131.1 • 50.0 656.0 • 200.0 2664.0 •
12.0 157.4 • 60.0 787.0 • 220.0 2929.0 •
15.0 196.7 • 70.0 918.0 •
20.0 262.2 • 80.0 1047.0 •
25.0 327.8 • 120.0 1598.0 •
30.0 393.3 • 150.0 1997.0 •
35.0 459.9 • 160.0 2130.0 •
16
Chemical Composition en aC-5083 casted-block, all sides sawnCast aluminum Plates
Mechanical Properties:
special properties:
Si Fe Cu Mn Mg Cr Zn Ti Andre Al
0,4 0,4 0,10 0,4-1,0 4,0-4,9 0,05-0,25 0,25 0,15 0,15 Rest
Tensile strengthRm N/mm2
0,2% proof stressRp 0,2 N/mm2
Elongation A50 mm A
Brinell hardness
HBS
min. % min. % min.220 - 250 110 - 115 10 - 15 ca. 70 - 75
Corrosion resistance Suitability for anodizing Weldability
very good Only for technical purpose very good
Aluminum SheetS/PlAteS
17
aluminumplates - en aC-5083 casted block - all sides sawnnaturehard, homogenized and stress relieved
Thicknessmm
kg/pcs. 1020 x 3100 mm Thicknessmm
kg/pcs. 1020 x 3100 mm
50 435,0 • 120 1043,5 •
60 521,8 • 130 1130,5 •
70 608,7 • 140 1217,4 •
80 695,7 • 150 1304,4 •
90 782,6 • 160 1391,3 •
110 956,6 • 200 1739,1 •
Characteristics
• Excellent dimensional stability during machning
• Fully weldable
• Excellent corrosion resistance
• Minimal porosity
• Good mechanical properties at elevated temperatures
further thicknesses from 10-1000 mm from stock available. Maximum width 1180 mm / maximum length 3100 mm.
18
special Characteristics:• Excellent dimensional stability during machining• High mechanical properties• Minimal porosity• Excellent for anodizing (hard)• Fully machinable• Fully weldable• Roughness of Ra 0.4 microns• Excellent corrosion resistance• Good mechanical properties at elevated temperatures
TolerancesThickness: ± 0.1 mm
flatness: < 12 mm 0.4 mm/m
flatness: > 12 mm 0.13 mm/m
Mechanical Values - en 485-2: 2008
Chemical composition: aluminum plates - casted - en aC-5083en 573-3: 2009
Si Fe Cu Mn Mg Cr Zn Andre Al0,4 0,4 0,1 0,4-1,0 4,0-4,9 0,05-0,25 0,25 0,15 Rest
Tensile strength Rm N/mm2
0,2% proof stressRp 0,2 N/mm2
Elongation A50 mm A
Brinell hardnessHBS
min. norm min. norm % min. % max.275 125 15 70
Aluminum SheetS/PlAteS
19
aluminum plates - casted - en aC-5083Precision milled on both sides with protective foil.
Thicknessmm
kg/pcs. 1240 x 3048 mm kg/pcs. 1520 x 3020 mm kg/pcs. 1540 x 3048 mm
6,35 64,8 •
8,00 101,4 •
10,00 124,0 •
12,00 148,8 •
15,00 185,9 •
20,00 247,9 •
25,00 309,9 •
30,00 371,8 •
35,00 433,8 •
40,00 495,8 •
50,00 619,7 •
60,00 760,4 •
80,00 1013,9 •
20
Aluminum SheetS/PlAteS
Chemical Composition: en aW-2017a - en 573-3: 2009
Mechanical Properties - en 485-2: 2008
si fe Cu Mn Mg Cr Zn others al0.2-0.8 0.7 3.5-4.5 0.4-1.0 0.4-1.0 0.1 0.25 0.15 Rest
special Characteristics:
Corrosion resistance suitability for anodizing Weldability
Acceptable Protective anodising Acceptable
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stressRp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.T451 1.5 - 6.0 390 245 15 110
T451 6.0 - 12.5 390 260 13 111
T451 12.5 - 40.0 390 250 12 110
T451 40.0 - 60.0 385 245 12 108
T451 60.0 - 80.0 370 240 7 --
21
aluminum sheets and Plates - en aW 2017 aen573-3, 485-1, 485-2, 485-3, 485-4
Thicknessmm
Kg/pcs. 2-8 x 1000 x 2000 mm 10-150 mm x 1020 x 2020 mm
Kg/pcs. 1520 x 3020 mm
2.0 11.2 •
3.0 16.8 •
4.0 22.4 •
5.0 28.0 • 61.0 •
6.0 33.6 • 72.9 •
8.0 44.8 • 100.2 •
10.0 57.7 • 125.3 •
12.0 69.3 • 150.4 •
15.0 86.5 • 188.0 •
20.0 115.4 • 250.6 •
25.0 144.2 • 313.3 •
30.0 173.0 • 376.0 •
40.0 231.0 • 505.0 •
50.0 288.4 • 631.0 •
60.0 346.0 • 757.2 •
70.0 403.8 • 883.4 •
80.0 461.5 • 1009.6 •
90.0 1135.8 •
100.0 876.8 • 1262.0 •
120.0 692.2 • 1605.0 •
150.0 865.2 • 1894.0 •
22
Alloy overview
Wide selection of alloysThe table below sums up a number of the alloys and corresponding thickness directly available from Denmark or Germany.
Standard rolled plate dimensions Max. dimensions of cast blocks
Thickness Max. width Max. length
6 - 150 mm 1520 mm 3020 mm
150 - 520 mm 1520 mm 2800/3020 mm
610 mm x 1350 mm x 3100 mm
595 mm x 1100 mm x 3500 mm
1000 mm x 1650 mm x 1800 mm
Thickness EN AW-5754 EN AW-5083 EN AW-6082 EN AW-2017 EN AW-7075 alloy 2219 Hokotol EN AC-5083
milled surf.
EN AC-5083
all sides sawn
mm DE Dk DE Dk DE Dk DE DE Dk DE DE Dk DE Dk DE Dk
1 • • •
2 • • • • •
3 • • • • • •
4 • • • • • •
5 • • • • • • • •
6 • • • • • • • • • •
8 • • • • • • • • • • • •
10 • • • • • • • • • • • •
12 • • • • • • • • • • • •
15 • • • • • • • • • • • •
20 • • • • • • • • • • • •
25 • • • • • • • • • • • •
30 • • • • • • • • • • • •
35 • • • • • • • • • • •
40 • • • • • • • • • • • • •
45 • • • • • • • • •
50 • • • • • • • • • • • • •
51 • •
55 • • • • • • • •
60 • • • • • • • • • • • • •
65 • •
70 • • • • • • • • • • • •
75 • •
80 • • • • • • • • • • • • •
85 •
90 • • • • • • • • • • •
100 • • • • • • • • • • •
110 • • • • • •
120 • • • • • • • • • • •
130 • • • • • •
140 • • • • • • •
150 • • • • • • • • •
160 • • • • •
180 • • • • •
200 • • • • • •
220 • • •
250 • • • •
280 • •
300 • • • •
320 • •
350 • •
400 • •
450 • •
500 • •
23
SPeCiAl AlloyS
Blow mould tank
Mould for car headrest (made by W. Olsen)
Cast Aluminum – 5083 alloyOur cast Aluminum is available sawn on six sides.
Characteristics:
• Easy to mill
• Minimum porosity
• No rolling structure
• Internal stress is reduced to the absolute minimum to obtain extreme precision, also after machining
Cast and precision milled – 5083 alloyThe precision-milled EN AC-5083 plates have the
following additional advantages:
• Flatness tolerances to a minimum of
0.13 mm/metre ≥15 mm thick
• Thickness tolerances of +/- 0.127 mm
• Roughness: Ra 0.64 my
• Foil on both sides
2219 alloy Fields of application:
• Precision parts for the machine industry due to
high dimensional stability
• Machine parts
• Moulds
• Suitable for high temperatures
• Refrigeration engineering
Characteristics:
• High strength under heat stress
• Medium and high strength
• Resistant to wear
• Excellent weldability
• Good polishing properties
• Good corrosion resistance
• Extremely uniform mechanical properties
throughout the entire thickness of the plate
• Excellent dimensional stability by stress relieved
stretching or cold compressing
• Good thermal conductivity
Hokotol/Alumold-1 – 7000 alloy Fields of application:
• Moulds for blow forming and injection
moulding for the plastics industry
• Punching tools
• Machine parts requiring high strength combi-
ned with low weight
• Moulds for casting plastic window frames
Characteristics:
• Lightweight
• Easy to mill
• Extremely uniform mechanical properties
throughout the entire thickness of the plate
• Resistant to wear
• Good polishing properties
• Excellent dimensional stability by stress relieved
stretching or cold compressing
• Good thermal conductivity
Precision part in Alca-5
24
special Characteristics:
Mechanical Properties - en 485-2: 2008
For more information see page 54 - 66
Chemical Composition: en aW-5005 - en 573-3: 2009
aluminum sheets - standard Quality – en aW-5005en 573-3, 485-1, 485-2, 485-4
On request sheets can be foiled.
si fe Cu Mn Mg Cr Zn others al
0.3 0.7 0.20 0.20 0.5-1.1 0.10 0.25 0.15 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.H14 0.2-1.5 145 185 120 2 48
H24/H34 0.5-6 145 185 110 4-6 47
Thicknessmm
Kg/pcs. 1000 x 2000 mm
Kg/pcs. 1250 x 2500 mm
Kg/pcs. 1500 x 3000 mm
Kg/pcs. 2000 x 4000 mm
1.0 5.4 • •
1.5 8.1 • 12.7 • 18.3 •
2.0 10.8 • 17.0 • 24.3 • 43.2 •
2.5 13.5 • 21.1 • 30.5 •
3.0 16.2 • 25.3 • 36.6 •
Corrosion resistance suitability for anodizing Weldability
Good Vey good Good
Specially suited for decorative anodizing
Aluminum SheetS/PlAteS
25
aluminum sheets - Guaranteed anodizing Quality - en aW-50051 side covered with Pe-foil. en 573-3, 485-1, 485-2, 485-4
aluminum sheets - en aW-5005en 573-3 485-1, 485-2, 485-4nature with 15-20 microns, 1 side covered with Pe-foil.
*B2 and B3 bronze anodized available with 15-20 microns, 1 side covered with PE-foil.
aluminum sheets - en aW-3003/3005 H 45en 573-3, 485-1, 485-2, 485-4White Ral 9010, 1 side covered with Pe-foil.Powder coated, gloss 80. backside 5 microns with transparent coat.
The sheets are pliable. All stated weights are theoretical weights, which may vary.Radius = 2 x thickness. Temperature = > 15° C. 1) Also available in RAL 9005 black PVDF* Coated on both sides
all sheets can be supplied covered with Pe-foil - 2 sides.
Nature anodized
B2 B3
other Ral-colours and sizes are available.
Time of delivery:approx. 2 weeks
RAL 9010
Thicknessmm
Kg/pcs. 1000 x 2000 mm
Kg/pcs. 1250 x 2500 mm
Kg/pcs. 1500 x 3000 mm
Kg/pcs. 2000 x 4000 mm
1.0 5.4 • •
1.5 8.1 • 12.7 • 18.3 •
2.0 10.8 • 17.0 • 24.3 • 43.2 •
2.5 13.5 • 21.1 • 30.5 •
3.0 16.2 • 25.3 • 36.6 •
4.0 21.6 • 33.8 • 48.6 •
Thicknessmm
Kg/pcs. 1000 x 2000 mm
Kg/pcs. 1250 x 2500 mm
Kg/pcs. 1500 x 3000 mm
Kg/pcs. 1500 x 4000 mm
1.0 5.4 • 8.5 • 12.2 •
*1.5 8.1 • 12.7 • 18.3 • 24.4 •
*2.0 10.8 • 17.0 • 24.3 •
2.5 13.5 •
3.0 16.2 • 36.6 •
4.0 21.6 • 33.8 • 48.6 •
Thicknessmm
Kg/pcs. 1000 x 2000 mm
Kg/pcs. 1250 x 2500 mm
Kg/pcs. 1500 x 3000 mm
0.9 7.6 1)•
1.0 12.2 •
1.5 8.1 *• 12.7 *• 18.3 •
2.0 24.3 •
26
Painted sheets for signs
Material:• Aluminum alloy EN AW-3003 H44• Pliable• Mechanical Properties: 0.2% proff stress = 160-200 MPa. Tensile strength = 180-220 MPa. Elongation A5, % min. = 8 Very corrosion-resistant alloy
Paint:• Wind/weather-resistant polyester paint• High gloss 90% Gardner, white 70%• Screen printable, and suitable for painting• With protective foil
Signal red(APP317)NCS 1977-Y90Rnext to average standardNCS 2080-Y90R.
Signal blue(APP618)NCS 3062-R90Bnext to average standardNCS 3070G-R90B.
Signal yellow(APP408)NCS 0871-G99Ynext to average standardNCS 0070-Y.
Signal green(APP520)NCS 3260-G10Ynext to average standardNCS 3060G.
White NCS 0500.
White NCS 0502Y.
aluminum sheets, painted
aluminum sheets, painted nCs 0502 Y white
aluminum sheets, painted nCs 0500 white
For technical reasons, the colour samples above can vary from the colour of the painted sheets.
Please ask for colour samples.
CoAted SheetS
Dimension Kg/pcs.1.6 x 1250 x 2500 13.5 Signal red
Signal blue
Signal yellow
Signal green
Dimension Kg/pcs. Dimension Kg/pcs.0.7 x 1250 x 2000 4.8 1.5 x 1250 x 2500 12.7
0.8 x 1250 x 2000 5.4 1.5 x 1500 x 3000 18.3
1.0 x 1250 x 2500 8.5 1.8 x 1250 x 2500 15.2
1.5 x 1000 x 2000 8.1 1.8 x 1500 x 3000 21.9
Dimension Kg/pcs.1.0 x 1250 x 2500 8.5
1.5 x 1000 x 2000 8.1
1.5 x 1250 x 2500 12.7
1.5 x 1500 x 3000 18.3
1.8 x 1000 x 2000 9.8
1.8 x 1250 x 2500 15.2
27
overview of coating typesCoated Aluminum sheets are most often used in the building, sign and insulation sectors. In general there are two types of coated Aluminum sheets: liquid painted and powder painted. Below is an overview of the two types and their charac-teristics:
Definition Types advantages Disadvantages
liquid painting
Liquid paint is applied to the sheet with a roller and is then heat dried to harden the paint.
Polyester
Polyurethane
Polyamide
PVDF
• Excellent resistance to abra-sion and knocks (Polyamide)
• Resistant to chemical, mecha-nical and corrosive effects (PVDF)
• Excellent elasticity (PVDF)
• Good chemical resistance (Polyamide)
• Good coating elasticity
• Good resistance to UV (Polyamide)
• PVDF has 24+ years life expectancy
• Bad chemical resistance
(Polyrethane)
Powder painting
The sheet is coated with a thermoset layer of powder. The paint is then hardened by heat-treating the sheet.
Thermoplastic
Polyethylene
Polypropylene
Vinyl
Polyamide
Polyester
Thermosetting
Epoxy
Polyester
Epoxy-polyester
(mix)
• High material exploitation dur-ing production – no evapora-tion
• Easy to apply thicker layer
• Excellent resistance to abra-sion and knocks (Polyamide)
• Resistant to chemical effects (Polyethylene, vinyl)
• Good adherence (polyester)
• Good resistance to weather (polyester, vinyl)
• High corrosion stability
• Good coating elasticity
• Good formability
• Good mechanical features (Epoxy)
• Easy to apply finer thickeness
• Sheets can be scored without the paint cracking
• Polyester has 16 years life expectancy
• Bad resistance to weather (Polyethylene, epoxy)
• Bad resistance to UV (Polyester)
• Bad resistance to weather (Polyester)
• Wastage during production in the form of evaporation if there is over-spraying
nb: When ordering coated sheets it is a good idea to order the entire load in one go to avoid slight differences in colour as a result of further orders being filled from different batches.
alloys and maintenance When using coated sheets in construction, Alcobra recommends using sheets made of Aluminum alloy EN AW-5754 as this has corrosion resistance properties. The use of other alloys invalidates the guarantee. The sheet surface should be maintained by being cleaned at least once a year to uphold the guarantee for the material supplied.
28
Aluminum treAd PlAteS / riCeCorn SheetS
Chemical Composition en aW-5754 - en 573-3: 2009
Mechanical Properties: 485-2: 2008
For more information see page 54 - 66
We can also supply:
Quintet
Ricecorn sheets
one bar
Duet
si fe Cu Mn Mg Cr Zn others al
0.4 0.4 0.1 0.5 2.6-3.6 0.3 0.2 0.4 Rest
Temper Thickness Tensile strengthRm n/mm2
0.2% proof stress
Rp 0.2 n/mm2
elongation a50 mm a
brinell hardness
Hbs
mm min. max. min. % min. % min.H114 1.5-3 190 260 80 10 60
H114 3-20 190 260 80 12-14 15 60
H244 1.5-3 220 275 130 6
aluminum Ricecorn sheets - sea water-resistanten aW-5754 H24
** Primed on the back of the plate
Thicknessmm
Kg/pcs. 1250 x 2500 mm
Kg/pcs. 2500 x 8000 mm
Kg/pcs. 2500 x 9000 mm
1.5/2 14.7 •
2/2.5 19.0 •
2.5/3 23.0 •
3/3.5 183.0 ** • 206.0 ** •
29
aluminum Tread Plates Quintet - sea water-resistant (specials)en aW-5754 H114 en 573-3. 1386
Thickness and size (mm)
approx. kg/pcs Quintet
3 / 4,0 x 2500 x 7000 mm 160.0 •3 / 4,0 x 2500 x 8000 mm 183.0 •
3 / 4,5 x 1250 x 3000 mm 34.2 •3 / 4,5 x 1500 x 4000 mm 54.7 •3 / 4,5 x 2000 x 4000 mm 72.9 •
5 / 6,5 x 1250 x 3000 mm 56.3 •5 / 6,5 x 1500 x 4000 mm 90.0 •5 / 6,5 x 2000 x 4000 mm 120.0 •
All stated weights are theoretical weights, which may vary.Other dimensions on request.
aluminum Tread Plates Quintet - sea water-resistanten aW-5754 H114en 573-3. 1386
Thickness and size (mm)
approx. kg/pcs Duett Quintet
1,5 / 2 x 1000 x 2000 mm 9.11,5 / 2 x 1250 x 2500 mm 15.2 •1,5 / 2 x 1500 x 3000 mm 21.2
2,5 / 4 x 1000 x 2000 mm 15.2 • •2,5 / 4 x 1250 x 2500 mm 23.8 • •2,5 / 4 x 1500 x 3000 mm 34.2 • •
3 / 4,5 x 1000 x 2000 mm 18.0 • •3 / 4,5 x 1250 x 2500 mm 28.0 • •3 / 4,5 x 1500 x 3000 mm 40.3 • •
3,5 / 5 x 1000 x 2000 mm 20.6 • •3,5 / 5 x 1250 x 2500 mm 32.1 • •3,5 / 5 x 1500 x 3000 mm 46.3 • •
4 / 5,5 x 1000 x 2000 mm 23.05 • •4 / 5,5 x 1250 x 2500 mm 36.0 • •4 / 5,5 x 1500 x 3000 mm 51.85 • •
5 / 6,5 x 1000 x 2000 mm 28.8 • •5 / 6,5 x 1250 x 2500 mm 45.0 • •5 / 6,5 x 1500 x 3000 mm 64.8 • •
7 / 8,5 x 1000 x 2000 mm 40.0 • •7 / 8,5 x 1250 x 2500 mm 63.0 • •7 / 8,5 x 1500 x 3000 mm 90.0 • •
8 / 9,5 x 1000 x 2000 mm 45.0 • •8 / 9,5 x 1250 x 2500 mm 70.3 • •8 / 9,5 x 1500 x 3000 mm 101.25 • •
30
Aluminum BArS - round
Chemical Composition: en aW-6060/6063 - en 573-3: 2009
special Characteristics:Extremely suitable for anodizing, good weldability.
Chemical Composition: en aW-6082 - en 573-3: 2009
special Characteristics:High corrosion resistance, good weldability, high strength, suitable for anodizing.
Chemical Composition: en aW-2007 - en 573-3: 2009
special Characteristics:Short-chipped - suitable for machining.
special Characteristics:Short-chipped, high corrosion resistance, high strength, suitable for anodizing. To obtain optimal surface when anodizing, it is recommended to turn min. 0.5 mm up to ø28 mm and 1 mm above that.
Chemical Composition: en aW-6262R - en 573-3: 2009
special Characteristics:Short-chipped, suitable for machining, polished surface, can be protectively anodized.
Chemical Composition: en aW-2011 - en 573-3: 2009
EN AW - 2007 EN AW - 6262R EN AW - 2011EN AW - 6082
special Characteristics:Short-chipped, suitable for machining, high strength.
Chemical Composition: en aW-2014 - en 573-3: 2009
special Characteristics:Suitable for machining, very high strength.
Chemical Composition: en aW-7075 - en 573-3: 2009
si fe Cu Mn Mg Cr Zn others al0.2-0.6 0.35 0.1 0.1 0.45-0.9 0.10 0.10 0.30 Rest
si fe Cu Mn Mg Cr Zn others al0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 0.2 0.25 Rest
si fe Cu Mn Mg Cr ni Zn others al0.8 0.8 3.3-4.6 0.5-1.0 0.4-1.8 0.1 0.2 0.2 0.5 Rest
si fe Cu Mn Mg Cr Zn bi Pb others al0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.14 0.25 0.4-0.7 0.3-0.39 0.30 Rest
si fe Cu Mn Mg Cr ni Zn bi Pb others al0.4 1.7 5.0-6.0 0.3 0.2-0.6 0.2-0.39 0.05-0.15 Rest
si fe Cu Mn Mg Cr Zn Ti others al0.5-1.2 0.7 3.9-5.0 0.1-1.2 0.2-0.8 0.1 0.25 0.15 0.2 Rest
si fe Cu Mn Mg Cr Zn Ti others al0.4 0.5 1.2-5 0.3 2.1-2.9 0.18-0.28 5.1-6.1 0.2 0.2 Rest
31
aluminum bars - Round – drawnen 573-3, 754-1,754-2, 754-3
Diam.mm
kg/m EN-AW 2007
EN-AW 2011
EN-AW 2014
EN-AW 2017
EN-AW 5083
EN-AW 5754
EN-AW 6012
EN-AW 6060
EN-AW 6082
EN-AW 6262
EN-AW 7075
3 0.02 •
4 0.04 •
5 0.06 • • •
6 0.08 • • • •
7 0.11 • •
8 0.15 • • • •
9 0.19 • • •
10 0.22 • • • • •
12 0.33 • • • • •
13 0.38 • •
14 0.44 • •
15 0.5 • • • • •
16 0.58 • • • • •
17 0.65 • • •
18 0.73 • • • • •
19 0.81 • •
20 0.89 • • • • • •
21 1 • •
22 1.08 • • • •
24 1.29 • • •
25 1.38 • • • • • •
26 1 • •
27 1.51 •
28 1.76 • • •
30 1.98 • • • • • •
31 2.09 • •
32 2.29 • • •
33 2.44 •
35 2.79 • • • • •
36 2.9 •
38 3.23 • •
40 3.6 • • • •
42 3.95 • •
45 4.6 • • • •
50 5.5 • • • •
55 6.8 • •
60 8.05 • •
32
Aluminum BArS
aluminum bars - Round – extrudeden 573-3, 755-1,755-2, 755-3
Diam.mm
kg/m EN-AW 2007
EN-AW 2011
EN-AW 2014
EN-AW 2017
EN-AW 5083
EN-AW 5754
EN-AW 6012
EN-AW 6060
EN-AW 6082
EN-AW 6262
EN-AW 7075
8 0.15 •
10 0.22 •
12 0.33 •
13 0.38
14 0.44 •
15 0.5 •
16 0.58 •
17 0.65
18 0.73 •
19 0.81
20 0.89 • • • • • • •
21 1
22 1.08
24 1.29
25 1.38 • • • • • • •
26 1.51
28 1.76
30 1.98 • • • • • •
32 2.29
35 2.79 • • • • •
36 2.9
38 3.23
40 3.6 • • • • • •
42 3.95 •
45 4.6 • • • •
48 5.2 •
50 5.5 • • • • • • •
55 6.8 • • • • •
60 8.05 • • • • • • •
65 9.47 • • • • • • •
70 10.7 • • • • • •
75 12.6 • • • • • •
80 14.2 • • • • • • • •
85 16.2 • • • •
90 18.1 • • • • •
95 20.2 • • • •
100 22.4 • • • • • • •
105 24.7 • • • • •
110 27.1 • • • • • •
115 29.6 • • • •
120 32.1 • • • • • • •
33
Diam.mm
kg/m EN-AW 2007
EN-AW 2011
EN-AW 2014
EN-AW 2017
EN-AW 5083
EN-AW 5754
EN-AW 6012
EN-AW 6060
EN-AW 6082
EN-AW 6262
EN-AW 7075
125 35 • •
130 37.5 • • • • •
135 40.3 •
140 43.8 • • • • • •
145 47.2
150 50.1 • • • • • • •
160 57.1 • • • • • •
165 60.9
170 64.7 • • •
175 67.3
180 72.5 • • • • • •
190 81.3 • • •
200 89.5 • • • • •
210 98.7 • • •
220 108.4 • • • • •
230 117 • • •
240 128.9 • • •
250 136.6 • • • •
260 151.4 • •
270 161.5 •
280 175.6 • • •
290 185.8
300 202 • • •
310 215 •
320 229 • • •
330 240 •
340 254
350 274 • • •
360 290 • •
380 323 • •
390 334
400 358 • • •
410 373 •
420 396
430 414
450 453 • •
34
alUMInUM baRs - RoUnD / sQUaRe / HexaGonal / bUlb
All stated weights are theoretical weights, which may vary.
aluminum Profiles - bulben aW-6082 T6 - en aW-5083 H112 Manufacturing lengths 5000 - 6000 mmen 573-3, 755-1, 755-2
H
C2
C1
S
Dimension H x s kg/m C1 C2
60 x 5.0 1.24 15 10
65 x 3.5 1.23 15 15
75 x 4.0 1.60 17 17
85 x 4.5 2.02 19 19
120 x 5.0 3.60 27 27
140 x 6.0 4.72 30 30
180 x 7.0 7.80 40 40
aluminum bars - Round – castedhomogenized - machined in lenghts of 1000-1250 mmTol on oD : -0 / + 2 mm en 573-3, en 573-4 (DIn 1725/T.1)
Diam.mm
kg/m EN-AW 2007
EN-AW 5083
EN-AW 6082
Diam.mm
kg/m EN-AW 2007
EN-AW 5083
EN-AW 6082
150 49.10 • • • 320 215.50 • • •
160 55.90 • • • 330 244.00 • • •
170 64.70 • • • 340 255.33 • • •
180 72.50 • • • 350 274.00 • • •
190 81.30 • • • 360 285.00 • • •
200 87.30 • • • 370 306.28 • • •
210 98.70 • • • 380 323.00 • • •
220 108.40 • • • 400 358.00 • • •
230 118.40 • • • 420 394.65 • • •
240 128.90 • • • 430 420.92 • • •
250 136.60 • • • 450 453.00 • • •
260 151.40 • • • 480 515.46 • • •
270 157.20 • • • 500 560.00 • • •
280 175.60 • • • 550 686.00 • • •
290 181.90 • • • 600 805.00 • • •
300 202.00 • • •
310 208.70 • • •
35
aluminum bars - square en 573-3, 754-1, 754-2, 754-4, 755-1, 755-2, 755-4
All stated weights are theoretical weights, which may vary. For bars over 100 mm the length is 3000 mm for alloy EN AW-6082
aluminum bars - Hexagonal en 573-3, 754-1, 754-2, 754-6, 755-1, 755-2, 755-6
All stated weights are theoretical weights, which may vary.
mm Kg/m en aW-2011(cut and drilling quality)
Length: 3000 mm8 0.16
10 0.25 •
14 0.48 •
17 0.72 •
19 0.89 •
22 1.20 •
27 1.80 •
mm Kg/m en aW-2007(cut and drilling quality)
Length: 3000 mm30 0.16 •
32 0.25 •
36 0.48 •
41 0.72 •
46 0.89 •
mm Kg/m en aW-6060/6063
Length:6000 mm
en aW-6082
Length:3000-6000 mm
en aW-6262R(cut and drilling quality)
Length:3000 mm
en aW-2011(cut and drilling quality)
Length:3000 mm
8 0.18 •
10 0.27 • • •
12 0.39 • •
15 0.61 • • •
20 1.08 • • • •
25 1.69 • • •
30 2.52 • • •
35 3.33 • • •
40 4.48 • • •
45 5.47 •
50 6.80 • • •
55 8.20 •
60 9.72 • • •
65 11.80 • •
70 13.23 • • •
80 17.30 • •
85 20.30 •
90 22.96 • • •
95 24.50 •
100 27.00 • • •
110 33.00 •
120 39.00 •
130 47.30 •
140 54.90 •
150 63.00 •
160 69.90 •
180 90.70 •
200 112.00 •
36
alUMInUM PRofIles - anoDIZeD / flaT
aluminum Profilesen aW-6060/6063 T6 - en aW-6082 T6Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5
aluminum Profiles nature anodized with e6/20 microns en aW-6060/6063 T6Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-5.
W x H x Teven-sided mm
kg/m
15 x 15 x 2 0.1620 x 20 x 2 0.2125 x 25 x 2 0.2630 x 30 x 2 0.3240 x 40 x 2 0.43
W x H x Teven-sided mm
kg/m
20 x 20 x 1 0.2120 x 20 x 2 0.3925 x 25 x 2 0.5230 x 30 x 2 0.6140 x 20 x 2 0.6140 x 40 x 2 0.8370 x 20 x 2 0.92
W x H x W x Teven-sided mm
kg/m
10 x 20 x 10 x 2 0.2015 x 15 x 15 x 2 0.2320 x 20 x 20 x 2 0.3220 x 40 x 20 x 2 0.5125 x 25 x 25 x 2 0.4040 x 20 x 40 x 2 0.52
W x H mm
kg/m W x H mm
kg/m W x H mm
kg/m
10 x 2 0.06 15 x 8 0.33 25 x 4 0.2710 x 3 0.09 15 x 10 0.41 25 x 5 0.3610 x 4 0.11 20 x 2 0.11 25 x 6 0.4110 x 5 0.14 20 x 3 0.17 25 x 8 0.54
10 x 8 0.22 20 x 4 0.22 25 x 10 0.68 12 x 3 0.10 20 x 5 0.27 25 x 12 0.81 12 x 4 0.13 20 x 6 0.33 25 x 15 1.02 12 x 8 0.26 20 x 8 0.44 25 x 20 1.35
15 x 2 0.09 20 x 10 0.54 30 x 2 0.1715 x 3 0.13 20 x 12 0.65 30 x 3 0.2515 x 4 0.17 20 x 15 0.81 30 x 4 0.3315 x 5 0.21 25 x 2 0.14 30 x 5 0.4115 x 6 0.24 25 x 3 0.21 30 x 6 0.49
37
Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary.Certain dimensions can also be supplied in alloy EN AW 6012/6262 T6.
On inquiry other alloys can be offered.
aluminum Profilesen aW-6060/6063 T6 - en aW-6082 T6Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5
W x Hmm
kg/m W x Hmm
kg/m W x Hmm
kg/m
30 x 8 0.65 60 x 15 2.43 100 x 30 8.1030 x 10 0.81 60 x 20 3.24 100 x 35 9.4530 x 12 0.98 60 x 25 4.08 100 x 40 10.8030 x 15 1.22 60 x 30 4.86 100 x 50 13.5030 x 20 1.62 60 x 40 6.80 100 x 60 16.20
30 x 25 2.03 60 x 50 8.10 100 x 70 18.90 35 x 3 0.29 70 x 5 0.95 100 x 80 22.00 35 x 4 0.38 70 x 6 1.14 110 x 10 3.00
35 x 5 0.48 70 x 8 1.53 120 x 5 1.62 35 x 6 0.60 70 x 10 1.89 120 x 10 3.24 35 x 8 0.76 70 x 12 2.27 120 x 12 3.89
35 x 10 0.95 70 x 15 2.84 120 x 15 4.86 35 x 12 1.14 70 x 25 4.75 120 x 20 6.50 35 x 15 1.42 70 x 30 5.70 120 x 25 8.40
40 x 2 0.22 70 x 35 6.80 120 x 30 9.7240 x 3 0.33 70 x 40 7.60 120 x 50 16.2040 x 4 0.44 70 x 50 9.71 120 x 60 19.5040 x 5 0.54 75 x 6 1.21 120 x 70 23.1040 x 6 0.65 75 x 8 1.62 120 x 80 26.0040 x 8 0.87 75 x 10 2.03 125 x 10 3.3840 x 10 1.08 75 x 15 3.10 125 x 12 4.0540 x 12 1.30 75 x 20 4.15 125 x 15 5.1040 x 15 1.62 75 x 25 5.08 125 x 40 13.5040 x 20 2.16 75 x 40 8.10 134 x 35 12.9140 x 25 2.71 80 x 3 0.65 140 x 20 7.7040 x 30 3.24 80 x 4 0.87 140 x 30 11.40
45 x 3 0.36 80 x 5 1.08 140 x 40 15.2045 x 5 0.61 80 x 6 1.30 150 x 5 2.0245 x 6 0.73 80 x 8 1.73 150 x 8 3.24
45 x 8 0.97 80 x 10 2.16 150 x 10 4.05 45 x 10 1.22 80 x 12 2.60 150 x 12 4.86
50 x 2 0.27 80 x 15 3.24 150 x 15 6.0850 x 3 0.41 80 x 20 4.32 150 x 20 8.1050 x 4 0.54 80 x 25 5.40 150 x 25 10.1350 x 5 0.68 80 x 30 6.48 150 x 30 12.1550 x 6 0.81 80 x 40 8.64 160 x 20 8.6450 x 8 1.08 80 x 50 10.90 165 x 65 28.9650 x 10 1.35 80 x 60 13.00 175 x 75 11.8550 x 12 1.62 85 x 30 6.89 180 x 20 9.8050 x 15 2.05 90 x 5 1.22 180 x 50 24.5050 x 20 2.70 90 x 10 2.43 200 x 10 5.4050 x 25 3.38 90 x 20 4.95 200 x 12 6.4850 x 30 4.05 100 x 3 0.81 200 x 15 8.1050 x 40 5.40 100 x 4 1.14 200 x 20 10.80
60 x 2 0.32 100 x 5 1.35 200 x 30 16.20 60 x 3 0.49 100 x 6 1.62 200 x 40 21.90 60 x 4 0.65 100 x 8 2.16 200 x 50 27.00
60 x 5 0.81 100 x 10 2.70 200 x 60 32.4060 x 6 0.98 100 x 12 3.24 310 x 20 16.7460 x 8 1.20 100 x 15 4.05 310 x 90 75.3360 x 10 1.62 100 x 20 5.40
60 x 12 1.95 100 x 25 7.00
38
Aluminum GAnGwAy ProfileS
aluminum Gangway Profile - sea water-resistant - anti-slip surfaceen aW-6060/6063en 755 - 1/2extremely suitable for gangways, stairs etc. Can be supplied cut to length subject to inquiry.
Not in stock.
250
2535
60
2,8
4 3
P 16062
300
25
353
P 13694
250
25
403
P 12234
Profileno.
Kg/m size lx-valuemm 4
Wx-valuemm 3
P 12234 3.93 250 x 40 mm 294020 11585
Profileno.
Kg/m size lx-valuemm 4
Wx-valuemm 3
P 16062 4.38 250 x 60 mm 891900 23380
Profileno.
Kg/m size lx-valuemm 4
Wx-valuemm 3
P 13694 3.83 300 x 35 mm 21500 8244
Gangway profiles example of application
39
40
Aluminum ProfileS - u / t / l
aluminum Profiles - U - en aW-6060/6063 T6Manufacturing length 6000 mmen 573-3, 755-1, 755-2, DIn 9713
aluminum T-profiles - en aW-6060/6063 T6Manufacturing length 6000 mmen 573-3, 755-1, 755-2, DIn 9714
* Price is dimension dependent.
even-sided mmH x W x T
kg/m even-sided mmH x W x T
kg/m
20 x 20 x 2 0.21 50 x 50 x 3 0.79
25 x 25 x 2 0.26 50 x 50 x 4 1.04
25 x 25 x 3 0.39 50 x 50 x 5 1.27
30 x 30 x 3 0.47 60 x 60 x 4 1.30
40 x 40 x 3 0.63 60 x 60 x 6 1.90
40 x 40 x 4 0.82 80 x 80 x 8 3.35
even-sided mmW x H x W x T
kg/m Uneven-sided mmW x H x W x T
kg/m Uneven-sided mmW x H x W x T
kg/m
10 x 10 x 10 x 1,5 0.11 20 x 10 x 20 x 2 0.25 30 x 50 x 30 x 4 1.15
10 x 10 x 10 x 2 0.15 20 x 15 x 20 x 2 0.28 30 x 50 x 30 x 5 1.35
12 x 12 x 12 x 2 0.20 10 x 20 x 10 x 2 0.20 40 x 50 x 40 x 4 1.41
14 x 14 x 14 x 2 0.22 15 x 20 x 15 x 2 0.25 30 x 60 x 30 x 3 0.96
15 x 15 x 15 x 2 0.23 30 x 20 x 30 x 2 0.43 30 x 60 x 30 x 4 1.27
20 x 20 x 20 x 2 0.32 40 x 20 x 40 x 2 0.52 30 x 80 x 30 x 3 1.10
20 x 20 x 20 x 3 0.43 15 x 25 x 15 x 2 0.29 40 x 60 x 40 x 3 1.14
25 x 25 x 25 x 2 0.40 15 x 30 x 15 x 2 0.30 40 x 60 x 40 x 4 1.52
25 x 25 x 25 x 3 0.59 15 x 30 x 15 x 3 0.45 40 x 60 x 40 x 5 1.78
30 x 30 x 30 x 2 0.49 20 x 30 x 20 x 2 0.36 40 x 70 x 40 x 4 1.54
30 x 30 x 30 x 3 0.72 20 x 30 x 20 x 3 0.54 40 x 80 x 40 x 3 1.25
30 x 30 x 30 x 4 0.88 40 x 30 x 40 x 3 0.87 40 x 80 x 40 x 4 1.64
35 x 35 x 35 x 3 0.80 20 x 35 x 20 x 2 0.39 40 x 80 x 40 x 5 2.03
40 x 40 x 40 x 2 0.62 20 x 40 x 20 x 2 0.51 50 x 80 x 50 x 5 2.30
40 x 40 x 40 x 3 0.93 20 x 40 x 20 x 3 0.63 40 x 100 x 40 x 3 1.40
40 x 40 x 40 x 4 1.21 30 x 40 x 30 x 3 0.79 40 x 100 x 40 x 4 1.98
50 x 50 x 50 x 3 1.22 25 x 40 x 25 x 3 0.72 50 x 100 x 50 x 3 1.58
50 x 50 x 50 x 4 1.54 25 x 45 x 25 x 3 0.73 50 x 100 x 50 x 5 2.57
50 x 50 x 50 x 5 1.90 20 x 50 x 20 x 3 0.73 50 x 100 x 50 x 8 x 6 x 8 3.65
60 x 60 x 60 x 4 1.86 25 x 50 x 25 x 4 1.00 55 x 120 x 55 x 10 6.22
60 x 60 x 60 x 5 2.29 30 x 40 x 30 x 4 0.99 60 x 120 x 60 x 5 3.20
30 x 50 x 30 x 3 0.90 100 x 200 x 100 x 10 10.26
41
Aluminum ProfileS - AnGle
aluminum Profiles - en aW-6060/6063 T6 - en aW-6082 T6Manufacturing length 6000 mm. en 573-3, 755-1, 755-2, DIn 1771
All stated weights are theoretical weights, which may vary.
even-sided mmW x H x T
kg/m Uneven-sided mmW x H x T
kg/m Uneven-sided mmW x H x T
kg/m
10 x 10 x 2 0.10 15 x 10 x 2 0.13 60 x 40 x 3 0.7915 x 15 x 2 0.16 20 x 10 x 2 0.16 60 x 40 x 4 1.0415 x 15 x 3 0.22 20 x 10 x 3 0.25 60 x 40 x 5 1.3020 x 20 x 2 0.21 20 x 15 x 2 0.18 60 x 40 x 6 1.5320 x 20 x 3 0.30 25 x 10 x 2 0.18 60 x 50 x 2 0.59
20 x 20 x 4 0.42 25 x 15 x 2 0.21 65 x 50 x 6 1.7825 x 25 x 2 0.26 25 x 15 x 3 0.30 70 x 20 x 2 0.4925 x 25 x 3 0.38 25 x 20 x 2 0.24 70 x 20 x 3 0.7125 x 25 x 4 0.50 25 x 20 x 3 0.35 70 x 25 x 2.5 0.6325 x 25 x 5 0.64 30 x 10 x 2 0.21 70 x 30 x 2 0.5330 x 30 x 2 0.32 30 x 15 x 2 0.24 70 x 50 x 5 1.6830 x 30 x 3 0.47 30 x 15 x 3 0.35 75 x 50 x 5 1.6830 x 30 x 4 0.61 30 x 15 x 4 0.45 75 x 50 x 6 2.0230 x 30 x 5 0.74 30 x 20 x 2 0.26 75 x 50 x 7 2.2535 x 35 x 3 0.55 30 x 20 x 3 0.39 75 x 50 x 8 2.6035 x 35 x 4 0.72 30 x 25 x 2 0.29 80 x 20 x 2 0.55
35 x 35 x 5 0.89 30 x 25 x 3 0.43 80 x 15 x 2 0.5140 x 40 x 2 0.43 35 x 20 x 3 0.43 80 x 30 x 3 0.9040 x 40 x 3 0.65 35 x 25 x 2 0.31 80 x 40 x 3 0.9940 x 40 x 4 0.83 35 x 30 x 3 0.51 80 x 40 x 4 1.2640 x 40 x 5 1.02 40 x 10 x 2 0.26 80 x 40 x 5 1.63
40 x 40 x 6 1.19 40 x 15 x 2 0.29 80 x 40 x 6 1.8545 x 45 x 3 0.71 40 x 20 x 2 0.32 80 x 50 x 5 1.7645 x 45 x 5 1.22 40 x 20 x 3 0.47 80 x 50 x 6 2.0150 x 50 x 2 0.53 40 x 20 x 4 0.61 90 x 50 x 6 2.2050 x 50 x 3 0.79 40 x 25 x 2 0.35 100 x 20 x 2 0.6350 x 50 x 4 1.04 40 x 25 x 3 0.51 100 x 30 x 3 1.0250 x 50 x 5 1.29 40 x 25 x 4 0.68 100 x 40 x 4 1.4750 x 50 x 6 1.52 40 x 25 x 5 0.83 100 x 50 x 3 1.2450 x 50 x 8 1.99 40 x 30 x 2 0.37 100 x 50 x 5 1.9650 x 50 x 10 2.43 40 x 30 x 3 0.55 100 x 50 x 6 2.34
60 x 60 x 2 0.65 40 x 30 x 4 0.73 100 x 50 x 7 2.8060 x 60 x 3 0.98 40 x 30 x 5 0.88 100 x 50 x 8 3.0760 x 60 x 4 1.26 45 x 30 x 1.5 0.31 100 x 50 x 10 3.79
60 x 60 x 5 1.58 50 x 15 x 2 0.36 100 x 60 x 4 1.7360 x 60 x 6 1.85 50 x 20 x 2 0.37 100 x 60 x 6 2.50
60 x 60 x 8 2.52 50 x 20 x 3 0.55 100 x 65 x 8 3.44 60 x 60 x 10 2.97 50 x 25 x 2 0.40 100 x 65 x 9 3.81 70 x 70 x 5 1.83 50 x 25 x 3 0.60 100 x 75 x 6 2.84 70 x 70 x 6 2.18 50 x 25 x 4 0.77 100 x 75 x 8 3.6170 x 70 x 7 2.52 50 x 25 x 5 0.96 120 x 40 x 4 1.75
75 x 75 x 5 1.96 50 x 30 x 2 0.43 120 x 50 x 5 2,2275 x 75 x 8 3.11 50 x 30 x 3 0.63 120 x 60 x 6 2.5075 x 75 x 9 3.50 50 x 30 x 4 0.84 120 x 80 x 10 5.3075 x 75 x 10 4.00 50 x 30 x 5 1.02 130 x 65 x 8 4.22
80 x 80 x 3 1.27 50 x 40 x 4 0.93 130 x 65 x 10 5.27 80 x 80 x 4 1.68 50 x 40 x 5 1.15 130 x 75 x 9 4.7780 x 80 x 5 2.14 60 x 15 x 2 0.40 130 x 80 x 6 3.33
80 x 80 x 6 2.50 60 x 20 x 2 0.44 150 x 50 x 5 2.6380 x 80 x 8 3.29 60 x 25 x 3 0.66 150 x 75 x 8 4.70
80 x 80 x 10 4.05 60 x 30 x 2 0.48 150 x 75 x 9 5.26 100 x 100 x 4 2.11 60 x 30 x 3 0.71 150 x 100 x 10 6.60 100 x 100 x 5 2.70 60 x 30 x 4 0.93 200 x 100 x 10 8.22 100 x 100 x 6 3.24 60 x 30 x 5 1.20100 x 100 x 10 5.13 60 x 40 x 2 0.54
42
alUMInUM TUbes - RoUnD
aluminum Tubes - Rounden aW-6060/6063 T6 - en aW-6005 T6 / en aW-6082 T6Manufacturing length 6000 mmen 573-3, 755-8, 755-1, 755-2
mmoD x t
kg/m mmoD x t
kg/m mmoD x t
kg/m
6.0 x 1.0 0.05 30.0 x 3.0 0.69 50.0 x 5.0 1.91
8.0 x 1.0 0.06 30.0 x 4.0 0.89 50.0 x 8.0 2.90
10.0 x 1.0 0.08 30.0 x 5.0 1.07 50.0 x 10.0 3.81
10.0 x 1.5 0.11 32.0 x 1.5 0.41 50.0 x 12.0 3.90
10.0 x 2.0 0.14 32.0 x 2.0 0.51 50.0 x 15.0 4.45
12.0 x 1.0 0.10 32.0 x 3.0 0.73 54.0 x 2.0 0.89
12.0 x 1.5 0.14 32.0 x 3.5 0.85 55.0 x 2.0 0.90
12.0 x 2.0 0.17 35.0 x 1.5 0.43 55.0 x 2.5 1.17
13.0 x 1.5 0.16 35.0 x 2.0 0.56 55.0 x 5.0 2.27
14.0 x 3.0 0.28 35.0 x 2.5 0.74 60.0 x 1.5 0.78
15.0 x 1.0 0.12 35.0 x 3.0 0.82 60.0 x 2.0 0.99
15.0 X 1.5 0.18 35.0 x 5.0 1.28 60.0 x 2.5 1.30
15.0 x 2.0 0.23 36.0 x 4.0 1.08 60.0 x 3.0 1.46
16.0 x 1.5 0.19 38.0 x 1.5 0.47 60.0 x 4.0 1.90
16.0 x 2.0 0.25 38.0 x 3.0 0.89 60.0 x 5.0 2.40
16.0 x 3.0 0.34 38.0 x 4.0 1.16 60.0 x 8.0 3.79
18.0 x 1.0 0.15 40.0 x 1.5 0.49 60.0 x 6.0 2.94
18.0 x 1.2 0.18 40.0 x 2.0 0.65 60.0 x 10.0 4.67
18.0 x 1.5 0.21 40.0 x 2.5 0.79 60.0 x 15.0 6.12
18.0 x 2.0 0.28 40.0 x 3.0 0.95 63.0 x 1.5 0.79
19.0 x 1.0 0.16 40.0 x 3.5 1.09 65.0 x 5.0 2.55
19.0 x 1.5 0.23 40.0 x 4.0 1.23 65.0 x 10.0 5.52
19.0 x 2.0 0.31 40.0 x 5.0 1.49 65.0 x 15.0 6.48
20.0 x 1.0 0.16 40.0 x 7.5 2.07 70.0 x 2.0 1.16
20.0 x 1.5 0.24 40.0 x 8.0 2.21 70.0 x 3.0 1.71
20.0 x 2.0 0.31 40.0 x 10.0 2.55 70.0 x 4.0 2.39
20.0 x 3.0 0.44 42.0 x 2.5 0.85 70.0 x 5.0 2.76
20.0 x 4.0 0.54 42.0 x 3.0 1.00 70.0 x 10.0 5.19
20.0 x 5.0 0.64 42.0 x 3.5 1.15 70.0 x 15.0 7.12
22.0 x 1.5 0.27 42.0 x 5.0 1.60 75.0 x 3.0 1.85
22.0 x 2.0 0.40 45.0 x 2.0 0.74 75.0 x 5.0 3.02
22.0 x 3.0 0.48 45.0 x 3.0 1.17 75.0 x 10.0 5.51
25.0 x 1.0 0.21 45.0 x 5.0 1.70 76.0 x 3.0 1.90
25.0 x 1.5 0.30 48.0 x 2.5 0.99 80.0 x 2.0 1.33
25.0 x 2.0 0.39 48.0 x 3.0 1.15 80.0 x 3.0 1.96
25.0 x 2.5 0.47 48.3 x 4.0 1.53 80.0 x 4.0 2.58
25.0 x 3.0 0.57 50.0 x 1.5 0.62 80.0 x 5.0 3.18
25.0 x 3.5 0.64 50.0 x 2.0 0.82 80.0 x 8.0 4.97
25.0 x 5.0 0.85 50.0 x 2.5 1.00 80.0 x 10.0 5.95
28.0 x 1.5 0.34 50.0 x 3.0 1.20 80.0 x 15.0 8.27
30.0 x 2.0 0.48 50.0 x 3.5 1.39 80.0 x 20.0 10.36
30.0 x 2.5 0.59 50.0 x 4.0 1.57 86.0 x 3.0 2.11
43
aluminum Tubes - Rounden aW-6060/6063 T6 - en aW-6005 T6 / en aW-6082 T6Manufacturing length 6000 mmen 573-3, 755-8, 755-1, 755-2
other dimensions can be supplied subject to inquiry.Please also ask for these alloys: EN AW-5754, EN AW-5083, EN AW-6012, EN AW- 2007
All stated weights are theoretical weights, which may vary.
mmoD x t
kg/m mmoD x t
kg/m mmoD x t
kg/m
90.0 x 3.0 2.22 140.0 x 5.0 5.72 220.0 x 20.0 34.54
90.0 x 4.0 2.91 140.0 x 10.0 11.05 220.0 x 30.0 49.22
90.0 x 5.0 3.61 140.0 x 15.0 16.19 230.0 x 10.0 18.70
90.0 x 10.0 7.25 140.0 x 20.0 20.72 230.0 x 20.0 36.27
90.0 x 15.0 9.71 150.0 x 3.0 3.74 240.0 x 5.0 10.15
90.0 x 20.0 11.80 150.0 x 5.0 6.18 240.0 x 10.0 19.90
96.0 x 3.0 2.37 150.0 x 8.0 9.66 240.0 x 20.0 37.99
100.0 x 2.0 1.70 150.0 x 10.0 12.40 250.0 x 10.0 20.40
100.0 x 3.0 2.47 150.0 x 15.0 17.20 250.0 x 20.0 39.72
100.0 x 4.0 3.30 150.0 x 20.0 22.50 250.0 x 50.0 86.35
100.0 x 5.0 4.04 160.0 x 5.0 6.60 260.0 x 10.0 21.25
100.0 x 6.0 5.01 160.0 x 10.0 12.95 260.0 x 20.0 41.45
100.0 x 10.0 7.65 160.0 x 15.0 18.50 260.0 x 30.0 59.58
100.0 x 15.0 11.01 160.0 x 20.0 24.17 266.0 x 8.0 17.70
100.0 x 16.0 11.43 164.0 x 7.0 9.40 280.0 x 15.0 34.32
100.0 x 20.0 13.90 170.0 x 10.0 13.81 300.0 x 10.0 25.04
100.0 x 30.0 18.13 170.0 x 15.0 20.00 300.0 x 20.0 48.36
102.0 x 1.7 1.48 175.0 x 7.0 9.99 318.0 x 9.0 23.60
106.0 x 3.0 2.73 180.0 x 5.0 7.55 320.0 x 10.0 26.77
110.0 x 5.0 4.50 180.0 x 10.0 15.11 320.0 x 20.0 51.81
110.0 x 10.0 8.93 180.0 x 15.0 21.37 350.0 x 10.0 29.36
110.0 x 15.0 12.30 180.0 x 20.0 27.50 360.0 x 10.0 30.22
110.0 x 20.0 15.54 180.0 x 30.0 38.86 365.0 x 25.5 74.76
120.0 x 3.0 3.03 180.0 x 40.0 48.00
120.0 x 5.0 4.90 190.0 x 10.0 16.07
120.0 x 8.0 7.74 190.0 x 15.0 23.50
120.0 x 10.0 9.82 200.0 x 5.0 8.30
120.0 x 15.0 13.60 200.0 x 8.0 14.40
120.0 x 20.0 16.96 200.0 x 10.0 16.20
120.0 x 30.0 23.31 200.0 x 15.0 23.96
125.0 x 4.0 4.12 200.0 x 20.0 31.50
125.0 x 5.0 5.18 200.0 x 30.0 44.04
125.0 x 7.5 7.50 206.0 x 3.0 5.50
125.0 x 10.0 9.93 210.0 x 5.0 8.69
130.0 x 3.0 3.35 210.0 x 10.0 16.99
130.0 x 5.0 5.31 210.0 x 15.0 25.26
130.0 x 10.0 10.84 210.0 x 20.0 32.81
133.0 x 3.0 3.37 216.0 x 8.0 14.37
135.0 x 5.0 5.53 220.0 x 10.0 18.13
44
Aluminum - roller tuBeS
Chemical Composition: en aW-6060
Roller TubesT.o.P.-quality:Material 6060en 485-1/2
Temper-hardenedStrength T6
Type:Hot-extruded via chambermould and drawn
Tolerances:Outside diameter ISO k 13Inside diameter ISO H 11Inequality of wall in % ofthe nominal wall thicknessS < 7 mm 6%S > 7 mm 5%
straightness: 0.2 mm/m
Concentric running accuracy between centres:Max: 0.4 mm/m
Roller TubesH.T.-quality:Material 6060en 485-1/2
Temper-hardenedStrength T6
Type :Hot-extruded via chamber
Tolerances:Outside diameter ISO k 15Inside diameter ISO M 15Inequality of wall in % ofthe nominal wall thicknessS > 10 mm 5%
straightness: 0.5 mm/m
Concentric running accuracy between centres:Max: 1.0 mm/m
Roller TubesI.s.Q.-quality:Material 6060en 485-1/2
Temper-hardenedStrength T6
Type :Hot-extruded via chamber
Tolerances:Outside diameter ISO k 14Inside diameter ISO H 14Inequality of wall in % ofthe nominal wall thicknessS < 10 mm 5%
straightness:D < 250 mm 0.6 mm D > 250 mm 0.8 mm/m
Concentric running accuracy between centres:D < 250 mm 1.2 mm/mD > 250 mm 1.6 mm/m
economy and quality:High quality roller tubes - a necessity for economical production. Fine tolerances on outside and inside diameters, uni-form thickness and concentric running accuracy help to optimise the production process and reduce material con-sumption.
additional technical and economical benefits:• Few tensions• Minimal imbalance• Optimal chipping properties• Low inertia force• Highly anodizable• High durability
Quality example: Roller tube in T.O.P.-quality.Dimensions 120 x 7 x 1800
Outside diameter ISO k 13Inside diameter ISO H 11Hight of arch, max: 0.36 mmConcentric running accuracybetween centres, max: 0.72 mmInequality of wall, max: 0.35 mm
si fe Cu Mn Mg Cr Zn others al
0.3-0.6 0.1-0.3 0.1 0.1 0.35-0.6 0.05 0.15 0.25 Rest
45
Roller Tubes - en aW-6060 T6Manufacturing length 6010 mmen 485-1/2
Can also be supplied cut to length. All stated weights are theoretical weights, which may vary.
Please allow approx. 1-2 weeks’ delivery time for dimensions not in stock.
oD x t mm kg/m Quality oD x t mm kg/m Quality oD x t mm kg/m Quality
30 x 4.0 0.90 T.O.P. 110 x 15.0 12.30 H.T. 170 x 20.0 26.00 H.T.
40 x 4.0 1.20 T.O.P. 110 x 20.0 15.60 H.T. 180 x 5.0 7.60 T.O.P.
40 x 6.0 1.80 T.O.P. 110 x 25.0 18.40 H.T. 180 x 8.0 11.90 T.O.P.
50 x 3.0 1.20 T.O.P. 114 x 10.0 9.00 T.O.P. 180 x 10.0 14.70 T.O.P.
50 x 5.0 1.90 T.O.P. 120 x 5.0 5.00 T.O.P. 180 x 15.0 21.40 H.T.
50 x 8.0 2.90 T.O.P. 120 x 7.0 6.80 T.O.P. 180 x 20.0 27.70 H.T.
50 x 10.0 3.50 T.O.P. 120 x 8.0 7.80 T.O.P. 182 x 11.0 16.30 T.O.P.
60 x 2.0 1.00 T.O.P. 120 x 10.0 9.50 T.O.P. 190 x 5.0 8.00 T.O.P.
60 x 3.0 1.50 T.O.P. 120 x 15.0 13.60 H.T. 190 x 10.0 15.60 T.O.P.
60 x 5.0 2.40 T.O.P. 120 x 20.0 17.30 H.T. 190 x 15.0 22.70 T.O.P.
60 x 6.0 2.80 T.O.P. 125 x 10.0 9.90 T.O.P. 195 x 12.5 19.70 I.S.Q.
60 x 7.5 3.40 T.O.P. 128 x 4.0 4.30 T.O.P. 200 x 10.0 16.40 T.O.P.
60 x 10.0 4.30 T.O.P. 130 x 5.0 5.40 T.O.P. 200 x 12.5 20.30 T.O.P.
60 x 15.0 5.80 H.T. 130 x 7.0 7.40 T.O.P. 200 x 15.0 24.00 I.S.Q.
62 x 6.0 2.90 T.O.P. 130 x 10.0 10.40 T.O.P. 200 x 25.0 37.90 I.S.Q.
70 x 3.0 1.70 T.O.P. 130 x 15.0 14.90 T.O.P. 205 x 12.5 20.80 H.T.
70 x 5.0 2.80 T.O.P. 130 x 20.0 19.00 H.T. 210 x 10.0 17.30 I.S.Q.
70 x 8.0 4.30 T.O.P. 132 x 8.5 9.10 T.O.P. 210 x 15.0 25.30 I.S.Q.
70 x 10.0 5.20 T.O.P. 140 x 5.0 5.80 T.O.P. 210 x 20.0 32.90 I.S.Q.
75 x 7.0 4.10 T.O.P. 140 x 7.0 8.10 T.O.P. 220 x 10.0 18.20 I.S.Q.
75 x 10.0 5.60 T.O.P. 140 x 10.0 11.20 T.O.P. 220 x 15.0 26.60 I.S.Q.
80 x 3.0 2.00 T.O.P. 140 x 15.0 16.20 H.T. 225 x 15.0 27.30 I.S.Q.
80 x 5.0 3.20 T.O.P. 140 x 20.0 20.80 H.T. 230 x 15.0 27.90 I.S.Q.
80 x 10.0 6.10 T.O.P. 144 x 11.0 12.70 T.O.P. 240 x 10.0 19.90 I.S.Q.
80 x 15.0 8.40 H.T. 150 x 5.0 6.30 T.O.P. 240 x 15.0 29.20 I.S.Q.
80 x 20.0 10.40 H.T. 150 x 7.5 9.20 T.O.P. 250 x 10.0 20.80 I.S.Q.
81x 8.0 5.10 T.O.P. 150 x 10.0 12.10 T.O.P. 250 x 15.0 30.50 I.S.Q.
90 x 6.0 4.40 T.O.P. 150 x 15.0 17.50 T.O.P. 260 x 15.0 31.80 I.S.Q.
90 x 10.0 6.90 T.O.P. 150 x 20.0 22.50 H.T. 270 x 17.5 38.20 I.S.Q.
90 x 15.0 9.70 H.T. 152 x 6.0 7.60 T.O.P. 285 x 12.5 29.50 I.S.Q.
90 x 20.0 12.10 H.T. 152 x 10.0 12.30 T.O.P. 285 x 20.0 45.90 I.S.Q.
100 x 5.0 4.10 T.O.P. 160 x 5.0 6.70 T.O.P. 285 x 26.0 58.50 I.S.Q.
100 x 6.0 4.90 T.O.P. 160 x 8.0 10.50 T.O.P. 300 x 10.0 25.10 I.S.Q.
100 x 10.0 7.80 T.O.P. 160 x 10.0 13.00 T.O.P. 303 x 18.0 44.40 I.S.Q.
100 x 15.0 11.00 H.T. 160 x 15.0 18.80 H.T. 310 x 20.0 50,20 I.S.Q.
100 x 20.0 13.80 H.T. 160 x 20.0 24.20 H.T. 325 x 17.0 45.30 I.S.Q.
102 x 8.5 6.90 T.O.P. 170 x 5.0 7.10 T.O.P. 360 x 17.0 50.40 I.S.Q.
106 x 8.0 6.80 T.O.P. 170 x 10.0 13.80 T.O.P. 365 x 25.5 74.90 I.S.Q.
110 x 5.0 4.50 T.O.P. 170 x 12.0 16.40 T.O.P.
110 x 10.0 8.70 T.O.P. 170 x 15.0 20.10 H.T.
46
Aluminum - Cylinder tuBeS
Chemical Composition: en aW-6060
Profitability and qualityThe cylinder tube is a special product in our extensive product range.Using this product, high precision can be achieved, which means they are often used as control and operating cylin-ders.Prices for special dimensions and formats available on request.
specification
aluminum cylinder tubes:
Alloy: EN AW 6060 T6
Inside Ø tolerance: ISO H11
Roughness: Ra < 1 micron
Surface: Fine-drawn, no covering
Surface: Fine-drawn, internally and externally hard
Layer thickness: 25 microns ± 5 microns
Strength: 450 HV
Straightness: 0.35 mm per m
Cylinder tubes for any use
• Nominal width 20-320 mm• Wall thickness 1.5-10 mm• Length up to 6000 mm
• Aluminum Cylinder tubes of high precision are always in stock
A technically extensive, high quality range includes different formats to meet individual problem solutions.
• Chamber-pressed• Chamber-pressed and drawn• Piercing-pressed and drawn• Non-covered• Hard anodized
additional technical
data and benefits
• High wear resistance• Fine tolerances• High quality surface• Excellent low friction properties• Lightweight• Pressure and corrosion resistant
Degrading m
AL 99
Annealed steel(105 kp/mm)
Cyanide tempered steel
Galvanized tempered chromium
Hard anodized100000
50000
10000
5000
2000
50250
1.5 mm
2 mm
2.5 mm
3 mm
3.5 mm
4 mm
5 mm
6 mm
7 mm
8 mm
Wall thickness 10 mm
Dia
met
er (m
m)
Pressure (bar)
25
30
40
50
60
70
8090
100
150
180
6 7 8 9 10 40 50 60 80 100 200 300 400 500 700
Wear - resistance
Standard values for the definition of the wall thickness on Aluminum cylinder tubes, Alloy - 6060, safety to 0.2-limit:2.
Wall thickness under constant load
si fe Cu Mn Mg Cr Zn others al
0.3-0.6 0.1-0.3 0.1 0.1 0.35-0.6 0.05 0.15 0.25 Rest
47
aluminum Cylinder Tubes - en aW-6060 T6Manufacturing length 3050 mmen 573-3, en 485-1/2
aluminum Profile Cylinder Tubes en aW-6060 T6Manufacturing length 3000 mm en 573-3for metric thread
for self-cutting screws
C
I
∅ B
∅ AP EDF
C 90R
A
∅ GA
∅ H A
C
I
∅ B
∅ AP EDF
C 90R
A
∅ GA
∅ H A
nominal sizemm
outside diameter xwall thickness mm
kg/m
80 85 x 2.586 x 3.087 x 3.588 x 4.0
1.752.122.482.85
85 89 x 2.0 1.48
100 105 x 2.50106 x 3.00
2.172.65
100 107 x 3.50108 x 4.00
3.073.55
110 116 x 3.00 2.88
125 132 x 3.50133 x 4.00
4.854.38
150 160 x 5.00 6.60
160 167 x 3.50170 x 5.00
4.857.00
200 210 x 5.00 8.69
250 262 x 6.00 13.03
300 312 x 6.00 15.60
320 336 x 8.00 22.26
nominal sizemm
outside diameter xwall thickness mm
kg/m
12 16 x 2.0 0.24
16 20 x 2.0 0.31
20 25 x 2.5 0.48
25 28 x 1.530 x 2.5
0.340.58
32 36 x 2.038 x 3.0
0.580.89
35 40 x 2.5 0.80
40 44 x 2.045 x 2.546 x 3.0
0.710.901.09
50 54 x 2.055 x 2.556 x 3.0
0.881.111.35
58 63 x 2.5 1.28
63 68 x 2.569 x 3.0
1.391.68
70 75 x 2.576 x 3.0
1,541.86
A (mm) P B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)
32.0 H 11 36.0 32.5 5.35 ±0.15 10.0 0.5 0.3 42.5
40.0 H 11 45.0 38.0 5.35 ±0.15 10.0 0.5 0.5 48.0
50.0 H 11 55.0 46.5 6.65 ±0.15 12.0 0.4 0.3 58.5
63.0 H 11 68.0 56.5 6.65 ±0.15 12.0 0.4 0.3 70.0
80.0 H 12 86.0 72.0 8.75 ±0.15 14.0 0.4 0.4 86.0
100.0 H 12 106.0 89.0 8.75 ±0.15 15.0 0.5 0.3 107.0
125.0 H 12 132.0 110.0 10.50 ±0.15 17.0 0.5 0.4 133.0
A (mm) P B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)
32.0 H 11 36.0 32.5 5.40 ±0.20 10.4 0.5 0.3 42.9
40.0 H 11 45.0 38.0 5.40 ±0.20 10.4 0.5 0.5 48.4
50.0 H 11 55.0 46.5 7.40 ±0.25 13.5 0.4 0.3 60.0
63.0 H 11 68.0 56.5 7.40 ±0.25 13.5 0.4 0.3 70.0
80.0 H 12 86.0 72.0 9.25 ±0.15 15.0 0.4 0.4 87.0
100.0 H 12 106.0 89.0 9.25 ±0.15 16.0 0.5 0.3 106.5
125.0 H 12 132.0 110.0 10.50 ±0.15 17.0 0.5 0.3 133.0
160.0 H 13 170.0 140.0 17.50 ±0.15 25.0 0.5 0.4 172.0
48
Aluminum tuBeS - SquAre / reCtAnGulAr
aluminum Tubes - square - en aW-6060/6063 T6Manufacturing length 6000 mm en 573-3, 755-8, 755-1, 755-2
aluminum Tubes - Rectangular - en aW-6060/6063 T6Manufacturing length 6000 mm en 573-3, 755-8, 755-1, 755-2
R = Corner radius
other dimensions can be supplied subject to inquiry.
All stated weights are theoretical weights, which may vary.
mm kg/m mm kg/m mm kg/m
10 x 10 x 1.0 0.10 35 x 35 x 2.0 0.75 60 x 60 x 3.0 1.9412 x 12 x 1.0 0.12 40 x 40 x 2.0 0.83 R 60 x 60 x 3.5 2.10
15 x 15 x 1.5 0.23 R 40 x 40 x 2.5 1.05 60 x 60 x 4.0 2.42 15 x 15 x 2.0 0.32 R 40 x 40 x 3.0 1.19 70 x 70 x 2.0 1.50 16 x 16 x 1.5 0.24 40 x 40 x 4.0 1.56 70 x 70 x 4.0 2.8618 x 18 x 1.0 0.20 45 x 45 x 2.0 0.93 80 x 80 x 3.0 2.5020 x 20 x 1.0 0.21 50 x 50 x 2.0 1.05 80 x 80 x 4.0 3.3020 x 20 x 1.5 0.30 R 50 x 50 x 2.5 1.30 R 80 x 80 x 5.0 4.2520 x 20 x 2.0 0.39 50 x 50 x 3.0 1.54 100 x 100 x 2.0 2.16
R 25 x 25 x 1.5 0.38 50 x 50 x 4.0 1.99 100 x 100 x 4.0 4.1525 x 25 x 2.0 0.52 50 x 50 x 5.0 2.43 100 x 100 x 5.0 5.1925 x 25 x 3.0 0.72 55 x 55 x 2.0 1.15 100 x 100 x 10.0 9.85
R 30 x 30 x 2.0 0.61 R 60 x 60 x 1.8 1.10 120 x 120 x 5.0 6.4030 x 30 x 3.0 0.88 60 x 60 x 2.0 1.30 150 x 150 x 5.0 7.90
mm kg/m mm kg/m mm kg/m
20 x 10 x 1.5 0.24 50 x 40 x 4.0 1.78 100 x 50 x 3.0 2.3620 x 10 x 2.0 0.29 60 x 20 x 2.0 0.83 100 x 50 x 4.0 3.07
20 x 15 x 2.0 0.35 60 x 25 x 3.0 1.29 100 x 50 x 5.0 3.7825 x 15 x 2.0 0.40 60 x 30 x 2.0 0.93 100 x 60 x 3.0 2.50 25 x 20 x 2.0 0.45 60 x 30 x 3.0 1.36 100 x 60 x 4.0 3.40
30 x 15 x 2.0 0.46 60 x 40 x 2.0 1.04 100 x 80 x 3.0 2.8930 x 20 x 2.0 0.50 60 x 40 x 2.5 1.30 120 x 18 x 2.0 1.46
30 x 25 x 2.0 0.56 60 x 40 x 3.0 1.60 120 x 20 x 2.0 1.5435 x 20 x 2.0 0.56 60 x 40 x 4.0 1.99 120 x 30 x 3.0 2.43
35 x 25 x 2.0 0.61 60 x 50 x 3.0 1.70 120 x 40 x 2.0 1.69 40 x 15 x 2.0 0.56 70 x 20 x 2.0 0.92 120 x 40 x 3.0 2.49
40 x 20 x 1.5 0.46 80 x 20 x 2.0 1.08 120 x 40 x 4.0 3.2940 x 20 x 2.0 0.61 80 x 30 x 2.0 1.15 120 x 50 x 4.0 3.64
40 x 20 x 2.5 0.81 80 x 30 x 3.0 1.71 120 x 60 x 2.5 2.3740 x 20 x 3.0 0.88 80 x 40 x 2.0 1.28 120 x 60 x 3.0 2.8140 x 25 x 2.0 0.66 80 x 40 x 3.0 1.85 120 x 60 x 4.0 3.7040 x 30 x 2.0 0.72 80 x 40 x 4.0 2.40 140 x 50 x 4.0 3.73
40 x 30 x 3.0 1.12 80 x 50 x 4.0 2.64 150 x 40 x 4.0 3.92 50 x 15 x 2.0 0.66 80 x 60 x 4.0 3.03 150 x 50 x 3.0 3.1450 x 20 x 2.0 0.72 90 x 30 x 2.5 1.55 150 x 50 x 4.0 4.1550 x 25 x 2.0 0.80 100 x 18 x 2.0 1.24 150 x 50 x 5.0 5.1550 x 25 x 3.0 1.19 100 x 20 x 2.0 1.26 150 x 120 x 5.0 7.1050 x 30 x 2.0 0.83 100 x 25 x 1.5 1.00 160 x 40 x 4.0 4.2050 x 30 x 2.5 1.10 100 x 30 x 3.0 2.18 180 x 40 x 4.0 4.5850 x 30 x 3.0 1.20 100 x 40 x 2.0 1.50 200 x 50 x 4.0 5.25
50 x 34 x 2.5 1.15 100 x 40 x 2.5 1.90 200 x 100 x 4.0 6.48 50 x 40 x 2.0 0.96 100 x 40 x 3.0 2.28 200 x 100 x 5.0 7.8350 x 40 x 2.5 1.20 100 x 40 x 4.0 2.9450 x 40 x 3.0 1.54 100 x 50 x 2.0 1.60
49
Aluminum - fittinGS
90° aluminum Welding bends - en aW-5754 - en aW-6060/6063en 573-3, DIn 1725, DIn 2605, DIn 2609
We would be pleased to receive your inquiries for 180° bends as well as dimen-sions not mentioned.
aluminum screw socketsen aW-6082 T6 / en aW 6060 T6 - With Whitworth pipe threads en 573-3 DIn 2999
aluminum nipples en aW-6082 T6 / en aW 6060 T6 - With Whitworth pipe threadsen 573-3, DIn 2999
We can also supply:Alu. welding collars / Alu. collars / Alu. welding nipples / Alu. T-pieces / Alu. reductions.
a
a
d1
s
90
d
l
lA
d
Dimension Dimensiond1 s a d1 s a
25 x 3.0 27.5 40 x 5.0 38.0
30 x 2.5 33.5 50 x 3.0 62.5
30 x 3.0 33.5 50 x 4.0 62.5
32 x 3.0 33.5 60 x 3.0 76.0
35 x 5.0 33.5 60 x 5.0 72.0
40 x 3.0 45.0 70 x 5.0 82.5
40 x 4.0 45.0 75 x 5.0 92.0
Dimension Dimensiond1 s a d1 s a
80 x 3.0 107.5 100 x 5.0 133.5
80 x 5.0 95.0 106 x 3.0 142.5
90 x 3.0 114.5 110 x 5.0 142.5
90 x 5.0 114.5 125 x 4.0 180.0
100 x 3.0 133.5 160 x 5.0 215.0
DimensionInch
Dimensionmm
outside Ød
lengthI
1/4" 8 20 253/8" 10 25 301/2" 15 30 353/4" 20 35 40
1" 25 40 45
11/4" 32 50 50
11/2" 40 55 55
2" 50 70 60
21/2" 65 90 70
3" 80 100 75
DimensionInch
Dimensionmm
outside Ød
lengthI
lengtha
1/4" 8 13 50 201/2" 15 22 50 203/4" 20 28 50 20
1" 25 35 60 25
11/4" 32 42 65 25
11/2" 40 50 75 30
2" 50 60 75 30
50
Aluminum - SPeCiAl ProfileS
alcobra takes part - from the very first idea to the finished product In the development phase you will find that Alcobra is
an active, creative and highly qualified sparring partner
during the whole process from the very first idea to the
finished product solution.It is about speaking the same
language as you and reading your demands in the par-
ticular situation.
Only few competitors match the competence and
know-how that Alcobra has accumulated concerning
development of customer designed profiles in Aluminum.
We know the many applications of this material. We
know our customer´s demands and have a technical
knowledge enabling us to carry on a dialogue on a very
high level. That very dialogue with our customers is
the prerequisite for developing individual solutions and
customer designed profiles.
logic and logistics in an extended co-operation The co-operation with Alcobra does not necessarily
have to end as soon as the product has been devel-
oped. We are also an efficient sparring partner within the
fields of:
• Stock keeping
• Logistics
• Purchasing
• Assembling
• Packing
• Delivery
outsourcingMany companies consider what functions they with
advantage can entrust to external partners. This is also
true for the total handling of Aluminum. More and more
of Alcobra´s customers choose to outsource the entire
flow of Aluminum to us.
For these customers, Alcobra takes care of all busi-
ness from ordering to production and transportation.
The result is a more efficient business where everyone
is focusing on what they do best. For Alcobra it is
Aluminum.
51
extruded aluminum paysThe use of a special profile of Aluminum will often be
a practical and more economic solution than the use of a
standard profile or profiles of other materials. An example
is our component for natural gas furnaces which is nor-
mally made of cast Aluminum. We pro duce the component
of extruded Aluminum and obtain a wide range of advan-
tages, e.g. no risk of vents and very low start-up costs
which is essential to the customer, especially if he wishes
to change the design later.
all projects are welcomeAlcobra is geared to take care of all kinds of projects as
for special profiles. From the very first idea presen ted by
means of a few lines to an almost finished and carefully
prepared drawing. Lets meet at the drawing board. We
look forward to contributing with our pro fessional help
and advise.
Special profiles are an advantage-
ous solution for all with a special
project on the drawing board.
Contact Alcobra and find out what
we can do for you.
52
Colour mArkS ACCordinG to Alloy
To avoid mixing materials we have marked our profiles and bars:
Alloy(EN AW)
AlloyDIN
Colour
2007 Al Cu Mg Pb Black (RAL 9004)
2011 Al Cu Bi Pb Red (RAL 3020)
2014 Gold (RAL 1036)
6026 Orange (RAL 2004)
5754 Al Mg 3 Yellow (RAL 1023)
6005 Al Mg Si 0.7 Turquoise (RAL 5018)
6012 Al Mg Si Pb White (RAL 9010)
6012A Pink (RAL 4003)
6060 Al Mg Si 0.5 Colourless
6262R Al Mg Si 1 Green (RAL 6018)
6082 Al Mg Si 1 Blue (RAL 5010)
7075 Al Zn Mg Cu 1.5 Purple (RAL 4005)
53
mAChininG
own service centre
As a natural supplement to our full service as the
leading Aluminum wholesaler, Alcobra offers machi ning
and sawing owing to our modern and big assembly of
machinery.
In our service centre we offer sawing of Aluminum plates
in dimensions up to:
• width: 4300 mm
• length: 7000 mm
• thickness: 250 mm
Circular saws
For cutting of profiles and bars, Alcobra disposes of
saws with cutting dimensions up to:
• width: 600 mm
• length: 250 mm
band saws
In addition Alcobra disposes of saws for cutting of bars
and profiles up to Ø 580 mm.
Contact Alcobra GmbH the next time you inquire cutting
of plates and roundels, shortening of profiles, band
sawing or foil application. We have the capacity to handle
orders for both large and small numbers.
54
teChniCAl informAtion
aluminum sheets/Plates en 485-2: 2008 (extraction)
Mechanical Properties
More information on page 55
alloy Temper Thickness
mm
Tensile strength
Rm
MPa
Proof stress
Rp0.2
MPa
elongation
min. %
bending radius brinell
hardness
Hbs
above to Min. Max. Min. Max. a50 mm a 180˚ 90˚EN AW-1200 O/H111 0.5 1.5 75 105 25 21 0t 0tAl99.0 1.5 3.0 75 105 25 24 0t 0t 23
H12 0.5 1.5 95 135 75 4 0.5t 0t 311.5 3.0 95 135 75 5 0.5t 0.5t 313.0 6.0 95 135 75 6 1.0t 1.0t 31
H14 0.5 1.5 115 155 95 3 1.0t 0.5t 371.5 3.0 115 155 95 4 1.0t 1.0t 373.0 6.0 115 155 95 5 1.5t 1.5t 37
H22 0.5 1.5 95 135 65 5 0.5t 0t 301.5 3.0 95 135 65 6 0.5t 0.5t 303.0 6.0 95 135 65 10 1.0t 1.0t 30
H24 0.5 1.5 115 155 90 4 1.0t 0.5t 371.5 3.0 115 155 90 5 1.0t 1.0t 373.0 6.0 115 155 90 7 1.5t 37
EN AW-1050A O/H111 0.5 1.5 65 95 20 22 0t 0t 20Al99.5 1.5 3.0 65 95 20 26 0t 0t 20
3.0 6.0 65 95 20 29 0.5t 0.5t 206.0 12.5 65 95 20 35 1.0t 1.0t 20
H112 >_6.0 12.5 75 30 20 23H12 0.5 1.5 85 125 65 4 0.5t 0t 28
1.5 3.0 85 125 65 5 0.5t 0.5t 283.0 6.0 85 125 65 7 1.0t 1.0t 286.0 12.5 85 125 65 9 2.0t 28
H14 0.5 1.5 105 145 85 3 1.0t 0.5t 341.5 3.0 105 145 85 4 1.0t 1.0t 343.0 6.0 105 145 85 5 1.5t 346.0 12.5 105 145 85 6 2.5t 34
H22 0.5 1.5 85 125 55 5 0.5t 0t 271.5 3.0 85 125 55 6 0.5t 0.5t 273.0 6.0 85 125 55 11 1.0t 1.0t 38
H24 0.5 1.5 105 145 75 4 1.0t 0.5t 331.5 3.0 105 145 75 5 1.0t 1.0t 333.0 6.0 105 145 75 8 1.5t 1.5t 336.0 12.5 105 145 75 8 2.5t 33
EN AW-3103 O/H111 0.5 1.5 90 130 35 19 0t 0t 27AlMn 1 1.5 3.0 90 130 35 21 0t 0t 27
3.0 6.0 90 130 35 24 1.0t 1.0t 27H12 0.5 1.5 115 155 85 4 1.5t 0.5t 36
1.5 3.0 115 155 85 5 1.5t 1.0t 363.0 6.0 15 155 85 6 1.0t 36
H14 0.5 1.5 140 180 120 2 2.0t 1.0t 451.5 3.0 140 180 120 3 2.0t 1.0t 453.0 6.0 140 180 120 4 2.0t 45
H22 0.5 1.5 115 155 75 7 1.0t 0.5t 361.5 3.0 115 155 75 8 1.0t 1.0t 363.0 6.0 115 155 75 9 1.0t 36
H24 0.5 1.5 140 180 110 4 1.5t 1.0t 441.5 3.0 140 180 110 5 1.5t 1.0t 443.0 6.0 140 180 110 6 2.0t 44
EN AW-3105 O/H111 0.5 1.5 100 155 40 15 0t 29Al Mn1Mg 0.5 1.5 3.0 100 155 40 17 0.5t 29
H12 0.5 1.5 130 180 105 4 1.5t 411.5 3.0 130 180 105 4 1.5t 41
H14 0.5 1.5 150 200 130 2 2.5t 481.5 3.0 150 200 130 2 2.5t 48
H22 0.5 1.5 130 180 105 6 411.5 3.0 130 180 105 7 41
H24 0.5 1.5 150 200 120 4 2.5t 471.5 3.0 150 200 120 5 2.5t 47
EN AW-5005 O/H111 0.5 1.5 100 145 35 19 0t 0t 29AlMg1 1.5 3.0 100 145 35 20 0.5t 0t 29
3.0 6.0 100 145 35 22 1.0t 1.0t 29H12 0.5 1.5 125 165 95 2 1.0t 0.5t 39
1.5 3.0 125 165 95 4 1.5t 1.0t 393.0 6.0 125 165 95 5 1.0t 39
H14 0.5 1.5 145 185 120 2 2.0t 1.0t 481.5 3.0 145 185 120 3 2.0t 1.0t 483.0 6.0 145 185 120 4 2.0t 48
H22/H32 0.5 1.5 125 165 80 5 1.0t 0.5t 381.5 3.0 125 165 80 6 1.5t 1.0t 383.0 6.0 125 165 80 8 1.0t 38
H24/H34 0.5 1.5 145 185 110 4 1.5t 1.0t 471.5 3.0 145 185 110 5 2.0t 1.0t 473.0 6.0 145 185 110 6 2.0t 47
EN AW-5052 O/H111 0.5 1.5 170 215 65 14 0t 0t 47AlMg 2.5 1.5 3.0 170 215 65 16 0.5t 0.5t 47
3.0 6.0 170 215 65 18 1.0t 476.0 12.5 165 215 65 19 2.0t 46
55
aluminum sheets/Plates en 485-2: 2008 (extraction)
Mechanical Properties
More information on page 56
alloy Temper Thickness
mm
Tensile strength
Rm
MPa
Proof stress
Rp0.2
MPa
elongation
min. %
bending radius brinell
hardness
Hbs
above to Min. Max. Min. Max. a50 mm a 180˚ 90˚EN AW-5052 12.5 80 165 215 65 18 46AlMg2.5 H112 >_6.0 12.5 190 110 7 55
12.5 40.0 170 70 10 4740.0 80.0 170 70 14 47
H12 0.2 0.5 210 260 160 4 630.5 1.5 210 260 160 5 631.5 3.0 210 260 160 6 631.5 3.0 210 260 160 6 633.0 6.0 210 260 160 8 636.0 12.5 210 260 160 10 63
H14 0.5 1.5 230 280 180 3 691.5 3.0 230 280 180 4 693.0 6.0 230 280 180 4 696.0 12.5 230 280 180 5 69
H22/H32 0.5 1.5 210 260 130 6 1.5t 1.0t 611.5 3.0 210 260 130 7 1.5t 1.5t 613.0 6.0 210 260 130 10 1.5t 616.0 12.5 210 260 130 12 2.5t 61
H24/H34 0.5 1.5 230 280 150 5 2.0t 1.5t 671.5 3.0 230 280 150 6 2.0t 2.0t 673.0 6.0 230 280 150 7 2.5t 676.0 12.5 230 280 150 9 3.0t 67
EN AW-5754 O/H111 0.5 1.5 190 240 80 14 0.5t 0.5t 52AlMg3 1.5 3.0 190 240 80 16 1.0t 1.0t 52
3.0 6.0 190 240 80 18 1.0t 1.0t 526.0 12.5 190 240 80 18 2.0t 52
12.5 100.0 190 240 80 17 52H112 >_6.0 12.5 210 140 12 62
12.5 25.0 200 120 10 5825.0 40.0 190 80 12 5240.0 80.0 190 80 14 52
H12 0.5 1.5 220 270 170 5 661.5 3.0 220 270 170 6 663.0 6.0 220 270 170 7 666.0 12.5 220 270 170 9 66
H14 0.5 1.5 240 280 190 3 721.5 3.0 240 280 190 4 723.0 6.0 240 280 190 4 726.0 12.5 240 280 190 5 72
H22/H32 0.5 1.5 220 270 130 8 1.5t 1.0t 631.5 3.0 220 270 130 10 2.0t 1.5t 633.0 6.0 220 270 130 11 1.5t 636.0 12.5 220 270 130 10 2.5t 63
H24/H34 0.5 1.5 240 280 160 6 2.5t 1.5t 701.5 3.0 240 280 160 7 2.5t 2.0t 703.0 6.0 240 280 160 8 2.5t 706.0 12.5 240 280 160 10 3.0t 70
EN AW-5083 O/H111 0.5 1.5 275 350 125 12 1.0t 1.0t 75AlMg4.5Mn0.7 1.5 3.0 275 350 125 13 1.5t 1.0t 75
3.0 6.0 275 350 125 15 1.5t 756.0 12.5 275 350 125 16 2.5t 75
12.5 50.0 275 350 125 15 7550.0 80.0 270 345 115 14 7380.0 120.0 260 110 12 70
120.0 150.0 255 105 12 69H112 >_6.0 12.5 275 125 12 75
12.5 40.0 275 125 10 7540.0 80.0 270 115 10 73
H116 >_1.5 3.0 305 215 8 3.0t 2.0t 893.0 6.0 305 215 10 2.5t 896.0 12.5 305 215 12 4.0t 89
12.5 40.0 305 215 10 8940.0 80.0 285 200 10 83
H12 0.5 1.5 315 375 250 4 943.0 6.0 315 375 250 6 946.0 12.5 315 375 250 7 94
H14 0.5 1.5 340 400 280 3 10201.5 3.0 340 400 280 3 10203.0 6.0 340 400 280 3 10206.0 12.5 340 400 280 1020
H22/H32 0.5 1.5 305 380 215 6 2.0t 1.5t 891.5 3.0 305 380 215 7 3.0t 2.0t 893.0 6.0 305 380 215 8 2.5t 896.0 12.5 305 380 215 10 3.5t 89
H24/H34 0.5 1.5 340 400 250 5 2.0t 991.5 3.0 340 400 250 6 2.5t 993.0 6.0 340 400 250 7 3.5t 996.0 12.5 340 400 250 8 4.5t 99
56
teChniCAl informAtion
aluminum sheets/Plates en 485-2: 2008 (extraction)
Mechanical Propertiesalloy Temper Thickness
mm
Tensile strength
Rm
MPa
Proof stress
Rp0.2
MPa
elongation
min. %
bending radius brinell
hardness
Hbs
above to Min. Max. Min. Max. a50 mm a 180˚ 90˚EN AW-6082 O >_0.4 1.5 150 85 14 1.0t 0.5t 40AlSiMgMn 1.5 3.0 150 85 16 1.0t 1.0t 40
3.0 6.0 150 85 18 1.5t 406.0 12.5 150 85 17 2.5t 40
12.5 25.0 155 16 40T4/T451 >_0.4 1.5 205 110 12 3.0t 1.5t 58
1.5 3.0 205 110 14 3.0t 2.0t 583.0 6.0 205 110 15 3.0t 586.0 12.5 205 110 14 4.0t 58
T451 12.5 40.0 205 110 13 5840.0 80.0 205 110 12 58
T42 >_0.4 1.5 205 95 12 1.5t 571.5 3.0 205 95 14 2.0t 573.0 6.0 205 95 15 3.0t 576.0 12.5 205 95 14 4.0t 57
12.5 40.0 205 95 13 5740.0 80.0 205 95 12 57
T6/T651/T62 >_0.4 1.5 310 260 6 2.5t 941.5 3.0 310 260 7 3.5t 943.0 6.0 310 260 10 4.5t 946.0 12.5 300 255 9 6.0t 91
T651/T62 12.5 60.0 295 240 8 8960.0 100.0 295 240 7 89
100.0 150.0 275 240 6 84150.0 175.0 275 230 4 83
T61/T6151 >_0.4 1.5 280 205 10 2.0t 821.5 3.0 280 205 11 2.5t 823.0 6.0 280 205 11 4.0t 826.0 12.5 280 205 12 5.0t 82
T6151 12.5 60.0 275 200 12 8160.0 100.0 275 200 10 81
100.0 150.0 275 200 9 81150.0 175.0 275 200 8 81
EN AW-7020 O >_0.4 1.5 220 140 12 45AlZn4.5Mg1 1.5 3.0 220 140 13 45
3.0 6.0 220 140 15 456.0 12.5 220 140 12 45
T4/T451 >_0.4 1.5 320 210 11 2.0t 921.5 3.0 320 210 12 2.5t 923.0 6.0 320 210 13 3.5t 926.0 12.5 320 210 14 5.0t 92
T6/T651/T62 >_0.4 1.5 350 280 7 3.5t 1041.5 3.0 350 280 8 4.0t 1043.0 6.0 350 280 10 5.5t 1046.0 12.5 350 280 10 8.0t 104
T651 12.5 40.0 350 280 9 10440.0 100.0 340 270 8 101
100.0 150.0 330 260 7 98150.0 175.0 330 260 6 98
EN AW-7075 O 1.5 3.0 275 145 10 3.0t 1.0t 55AlZn5.5MgCu 3.0 6.0 275 145 10 2.5t 55
6.0 12.5 275 145 10 4.0t 5512.5 75.0 275 9 55
T62 1.5 3.0 540 470 7 6.5t 1613.0 6.0 545 475 8 8.0t 1636.0 12.5 540 460 8 12t 160
T651/T62 12.5 25.0 540 470 6 16125.0 50.0 530 460 5 15850.0 60.0 525 440 4 15560.0 80.0 495 420 4 14780.0 90.0 490 390 4 14490.0 100.0 460 360 3 135
100.0 120.0 410 300 2 119120.0 150.0 360 260 2 104
T76/T7651 >_1.5 3.0 500 425 7 1493.0 6.0 500 425 8 1496.0 12.5 490 415 7 146
57
aluminum bars - extruded en 755-2: 2008 (extraction)
Mechanical Properties
More information on page 58
alloy Temper extrudedprofiles
Round bar-diameter
Dimensionssquare
hexagonalbars
extrudedround bars
Tensilestrength
Rm
0.2%Proof stress
Rp 0.2
elongation
e (3) (10)mm
D (1)mm
s (2)mm
e (3)mm
n/mm2 n/mm2 a50 mm a
above to above to above to above to Min. Max. Min. Max.%
min.%
min.EN AW-1050A F, H112 (4) all all all 60 - 20 - 25 23Al99,5 O, H111 all all all 60 95 20 - 25 23EN AW-2007 T4, T4510, T4511 (5) 0 80 0 80 0 25 370 - 250 - 8 6
AlCu4PbMgMn T4, T4510, T451 (5) 80 200 80 200 340 - 220 - 8 -T4, T4510, T451 (5) 200 250 200 250 330 - 210 - 7 -
EN AW-2011 T4 (5) 0 200 0 60 275 - 125 - 14 12AlCu6BiPb T6 (5) 0 75 0 60 310 - 230 - 8 6
T6 (5) 75 200 - - 295 - 195 - 6 -T6 (5) 0 25 310 - 230 - 6 4
EN AW-2014 O, H111 0 200 0 200 - 250 - 135 12 10AlCu4SiMn T4, T4510, T4511 0 25 0 25 370 - 230 - 13 11
T4, T4510, T4511 25 75 25 75 410 - 270 - 12 -T4, T4510, T4511 75 150 75 150 390 - 250 - 10 -T4, T4510, T4511 150 200 150 200 350 - 230 - 8 -T6, T4510, T6511 0 25 0 25 415 - 370 - 6 5T6, T4510, T6511 25 75 25 75 460 - 415 - 7 -T6, T4510, T6511 75 100 75 150 465 - 420 - 7 -T6, T4510, T6511 150 200 150 200 430 - 350 - 6 -T6, T4510, T6511 200 250 200 250 420 - 320 - 5 -
O, H111 0 20 - 250 - 135 12 10T4, T4510, T4511 0 20 370 - 230 - 11 10T6, T4510, T6511 0 10 415 - 370 - 7 5T6, T4510, T6511 10 40 450 - 400 - 6
En AW-2017A O, H111 0 200 0 200 - 250 - 135 12 10AlCu4MgSi(A) T4, T4510, T4511 (5) 0 25 0 25 380 - 260 - 12 10
T4, T4510, T4511 (5) 25 75 25 75 400 - 270 - 10 -T4, T4510, T4511 (5) 75 150 75 150 390 - 260 - 9 -T4, T4510, T4511 (5) 150 200 150 200 370 - 240 - 8 -T4, T4510, T4511 (5) 200 250 200 250 360 - 220 - 7 -
O, H111 0 20 - 250 - 135 12 10T4, T4510, T4511 (5) 0 10 380 - 260 - 12 10T4, T4510, T4511 (5) 10 75 400 - 270 - 10 8
En AW-2024 O, H111 0 200 0 200 - 250 - 150 12 10AlCu4Mg1 T3, T3510, T3511 0 50 0 50 450 - 310 - 8 6
T3, T3510, T3511 50 100 50 100 440 - 300 - 8 -T3, T3510, T3511 100 200 100 200 420 - 280 - 8 -T3, T3510, T3511 200 250 200 250 400 - 270 - 8 -T8, T8510, T8511 0 150 0 150 455 - 380 - 5 4
O, H111 0 30 - 250 - 150 12 10T3, T3510, T3511 0 30 420 - 290 - 8 6T8, T8510, T8511 0 30 455 - 380 - 5 4
EN AW-5754 F, H112 (4) 0 150 0 150 0 25 180 - 80 - 14 12AlMg3 F, H112 (4) 150 250 150 250 180 - 70 - 13 -
O, H111 0 150 0 150 0 25 180 250 80 - 17 15EN AW-5083 F, (4) 0 200 0 200 all 270 - 110 - 12 10AlMg4.5Mn0.7 F, (4) 200 250 200 250 260 - 110 - 12 -
O, H111 0 200 0 200 all 270 - 110 - 14 12O, H112 0 200 0 200 all 270 - 125 - 12 10
F, (4) all 270 - 110 - 12 10O, H111 all 270 - 110 - 14 12
O, H112 all 270 - 125 - 12 10EN AW-6005 T4 (5)(Å) 0 25 180 - 90 - 15 13AlSiMg T6 (5) 25 50 25 50 270 - 225 - 8 -
T6 (5)(Å) 0 5 270 - 225 - 8 6T6 (5)(Å) 5 10 260 - 215 - 8 6T6 (5)(Å) 10 25 250 - 200 - 8 6T4 (5)(H) 0 10 180 - 90 - 15 13T6 (5)(H) 0 5 255 - 215 - 8 6T6 (5)(H) 5 15 250 - 200 - 8 6
T6 (5) 0 25 0 25 270 - 225 - 10 8T6 (5) 50 100 50 100 260 - 215 - 8 -T6 (5) 0 5 270 - 225 - 8 6T6 (5) 5 10 260 - 215 - 8 6
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars.(3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide.(5) The properties can only be reached by shock cooling. 10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties,
the lowest specified value must be considered as the effective value for the whole profile.
Å = Open profileH = Hollow profile
58
teChniCAl informAtion
aluminum bars - extruded en 755-2: 2008 (extraction)
Mechanical Propertiesalloy Temper extruded
profilesRound bar-
diameterDimensions
squarehexagonal
bars
extrudedround bars
Tensilestrength
Rm
0.2%Proof stress
Rp 0.2
elongation
e (3) (10)mm
D (1)mm
s (2)mm
e (3)mm
n/mm2 n/mm2 a50 mm a
above to above to above to above to Min. Max. Min. Max.%
min.%
min.EN AW-6012 T6, T6510, T6511 (5) 0 150 0 150 0 30 310 - 260 - 8 6Al MgSiPb T6, T6510, T6511 (5) 150 200 150 200 260 - 200 - 8 -EN AW-6060 T4 (5) 0 25 0 150 0 150 0 15 120 - 60 - 16 14Al MgSi 0.5 T5 0 5 0 150 0 150 0 15 160 - 120 - 8 6
T5 5 25 140 - 100 - 8 6
T6 (5) 0 3 0 150 0 150 0 15 190 - 150 - 8 6T6 (5) 3 25 170 - 140 - 8 6
T64 (5) (8) 0 15 0 50 0 50 0 15 180 - 120 - 12 10T66 (5) 0 3 0 150 0 150 0 15 215 - 160 - 8 6T66 (5) 3 25 195 - 150 - 8 6
EN AW-6061 O, H111 0 200 0 200 - 150 - 110 16 14Al Mg1SiCu T4 (5) 0 200 0 200 180 - 110 - 15 13
T6 (5) 0 200 0 200 260 - 240 - 8 6O, H111 0 25 - 150 - 110 16 14
T4 (5) 0 25 180 - 110 - 15 13T6 (5) 0 5 260 - 240 - 8 6T6 (5) 5 25 260 - 240 - 10 8
EN AW-6082 O, H111 all 0 200 0 200 0 25 - 160 - 110 14 12AlSi1MgMn T4 (5) 0 25 205 - 110 - 14 12
T5 (Å+H) 0 5 270 - 230 - 8 6T6 (5)(Å+H) 0 5 290 - 250 - 8 6
T6 (5)(Å) 5 25 310 - 260 - 10 8T6 (5)(H) 5 15 310 - 260 - 10 8
T4 (5) 0 200 0 200 0 25 205 - 110 - 14 12T6 (5) 0 20 0 20 0 5 295 - 250 - 8 6T6 (5) 20 150 20 150 310 - 260 - 8 -T6 (5) 150 200 150 200 280 - 240 - 6 -T6 (5) 200 250 200 250 270 - 200 - 6 -T6 (5) 5 25 310 - 260 - 10 8
EN AW-6262AlMg1SiPb T6 (5) 0 25 0 200 0 200 0 25 260 - 240 - 10 8EN AW-6262RAlMg1SiPb T6 (5) 0 25 0 200 0 200 0 25 260 - 240 - 10 8En AW-7020 T6 (5) 0 50 0 50 350 - 290 - 10 8AlZn4.5Mg1 T6 (5) 50 200 50 200 340 - 275 - 10 -
T6 (5) 0 15 350 - 290 - 10 8EN AW-7022 T6, T6510, T6511 (5) 0 80 0 80 0 30 490 - 420 - 7 5Al Zn5Mg3Cu T6, T6510, T6511 (5) 80 200 80 200 470 275 400 165 7 -EN AW-7075 O, H111 0 200 0 200 - - - 10 8Al Zn 5.5MgCu T6, T6510, T6511 0 25 0 25 540 - 480 - 7 5
T6, T6510, T6511 25 100 25 100 560 - 500 - 7 -T6, T6510, T6511 100 150 100 150 530 - 470 - 6 -
T6, T6510, T6511 150 200 150 200 470 - 400 - 5 -T73, T73510, T7351 (9) 0 25 0 25 485 - 420 - 7 5
T73, T73510, T7351 (9) 25 75 25 75 475 - 405 - 7 -T73, T73510, T7351 (9) 75 100 75 100 470 - 390 - 6 -T73, T73510, T7351 (9) 100 150 100 150 440 - 360 - 6 -
O, H111 0 10 - 275 - 165 10 -T6, T6510, T6511 0 5 540 - 485 - 8 6T6, T6510, T6511 5 10 560 - 505 - 7 5T6, T6510, T6511 10 50 560 - 495 - 6 4
T73, T73510, T7351 (9) 0 5 470 - 400 - 7 5
T73, T73510, T7351 (9) 5 25 485 - 420 - 8 6
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars.(3) e = Wall thickness. (5) The properties can only be reached by shock cooling.
(8) Bending quality. (9) Referring to supplement A and supplement B for material in this condition. (10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties,
the lowest specified value must be considered as the effective value for the whole profile.
Å = Open profileH = Hollow profile
59
aluminum bars - Drawn en 754-2: 2008 (extraction)
Mechanical Properties
Tolerances for extruded flat Profiles en 755-5:1995Alloy group I: EN AW-1050A/ EN AW-1350/ EN AW-6005/ EN AW-6012/ EN AW-6060/ EN AW-6082/ EN AW-6262/ EN AW-6262R
Tolerances for extruded flat Profiles en 755-5:1995Alloy group II:EN AW-2007/ EN AW-2011/ EN AW-7075
alloy Temper Materialno.
Round bar-diameter
Dimensionssquare
hexagonalbars
Drawn tube
Tensilestrength
Rm
0.2%Proof stress
Rp 0.2
elongation
D (1)mm
s (2)mm
e (3)mm
n/mm2 n/mm2 a50 mm a
above to above to above to Min. Max. Min. Max.%
min.%
min.EN AW-2007 T3 (4) 3.1645.53 0 30 0 30 370 - 250 - 7 5
AlCu4PbMgMn T3 (4) 3.1645.53 30 80 30 80 340 - 220 - 6 -T351 (4) 3.1645.53 0 80 0 80 370 - 250 - 5 3
T3 (4) 3.1645.53 0 20 370 - 250 - 7 5T3510, T3511 (4) 3.1645.53 0 20 370 - 250 - 5 3
EN AW-2011 T3 3.1645.53 0 40 0 40 320 - 270 - 10 8AlCu6BiPb T3 3.1645.53 40 50 40 50 300 - 250 - 10 -
T3 3.1645.53 50 80 50 80 280 - 210 - 10 -T8 0 80 0 80 370 - 270 - 8 6T3 3.1645.53 0 5 310 - 260 - 10 8T3 3.1645.53 5 20 290 - 240 - 8 6T8 0 20 370 - 275 - 8 6
EN AW-6012 T4 (4) 3.0615.51 0 80 0 80 0 20 200 - 100 - 10 8AlMgSiPb T6 (4) 3.0615.71 0 80 0 80 0 20 310 - 260 - 8 6EN AW-6061 O, H111 3.3211.10 0 80 0 80 0 20 - 150 - 110 16 14
AlMg1SiCU T4 (4) 3.3211.51 0 80 0 80 0 20 205 110 - 16 14T6 (4) 3.3211.71 0 80 0 80 0 20 290 - 240 - 10 8
EN AW-6262R T6 (4) 0 80 0 80 0 20 290 - 240 - 10 8AlMg1SiPb T8 (4) 0 50 0 50 0 10 345 - 315 - 4 3
T9 (4) 0 50 0 50 0 10 360 - 330 - 4 3EN AW-6262 T6 (4) 0 80 0 80 0 20 290 - 240 - 10 8AlMg1SiPb T8 (4) 0 50 0 50 0 10 345 - 315 - 4 3
T9 (4) 0 50 0 50 0 10 360 - 330 - 4 3EN AW-6082 O, H111 3.2315.10 0 80 0 80 0 20 - 110 - 110 15 13AlSiMgMn T4 (4) 3.2315.51 0 80 0 80 0 20 205 - 110 - 14 12T6 (4) 3.2315.71 0 80 0 80 310 - 255 - 10 9
T6 (4) 3.2315.71 0 5 310 - 255 - 8 7T6 (4) 3.2315.71 5 20 310 - 240 - 10 9
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars.(3) e = Wall thickness. (5) The properties can only be reached by shock cooling.
(4) Properties may be obtained by press quenching.
Width
mm
Tolerance
mm 2<t<6 6<t<10 10<t<18 18<t<30 30<t<50 50<t<80 80<t<120 120<t<180 180<t<240
from 10 to 18 ±0.25 ±0.20 ±0.25 ±0.25 - - - - - -above 18 to 30 ±0.30 ±0.20 ±0.25 ±0.30 ±0.30 - - - - -above 30 to 50 ±0.40 ±0.25 ±0.25 ±0.30 ±0.35 ±0.40 - - - -above 50 to 80 ±0.60 ±0.25 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 - - -above 80 to 120 ±0.80 ±0.30 ±0.35 ±0.40 ±0.45 ±0.60 ±0.70 ±0.80 - -above 120 to 180 ±1.0 ±0.40 ±0.45 ±0.50 ±0.55 ±0.60 ±0.70 ±0.90 ±1.0 -above 180 to 240 ±1.4 - ±0.55 ±0.60 ±0.65 ±0.70 ±0.80 ±1.0 ±1.1 ±1.4above 240 to 350 ±1.8 - ±0.65 ±0.70 ±0.75 ±0.80 ±0.90 ±1.1 ±1.3 ±1.5above 350 to 450 ±2.2 - - ±0.80 ±0.85 ±0.90 ±1.0 ±1.2 ±1.4 ±1.6above 450 to 600 ±3.0 - - - - ±0.90 ±1.0 ±1.4 - -
Thickness alloy group I
Width
mm
Tolerance
mm 2<t<6 6<t<10 10<t<18 18<t<30 30<t<50 50<t<80 80<t<120 120<t<180 180<t<240
from 10 to 18 ±0.35 ±0.25 ±0.30 ±0.35 - - - - - -above 18 to 30 ±0.40 ±0.25 ±0.30 ±0.40 ±0.40 - - - - -above 30 to 50 ±0.50 ±0.30 ±0.30 ±0.40 ±0.50 ±0.50 - - - -above 50 to 80 ±0.70 ±0.30 ±0.35 ±0.45 ±0.60 ±0.70 ±0.70 - - -above 80 to 120 ±1.0 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 ±0.80 ±1.0 - -above 120 to 180 ±1.4 ±0.45 ±0.50 ±0.55 ±0.70 ±0.80 ±1.0 ±1.1 ±1.4 -above 180 to 240 ±1.8 - ±0.60 ±0.65 ±0.70 ±0.90 ±1.1 ±1.3 ±1.6 ±1.8above 240 to 350 ±2.2 - ±0.70 ±0.75 ±0.80 ±0.90 ±1.2 ±1.4 ±1.7 ±1.9above 350 to 450 ±2.8 - - ±0.90 ±1.0 ±1.1 ±1.4 ±1.8 ±2.1 ±2.3above 450 to 600 ±3.5 - - - - ±1.2 ±1.4 ±1.8 - -
Thickness alloy group II
60
teChniCAl informAtion
Tolerances for Drawn square, Hexagonale and Round bars according to en 754-4: 2008Alloy: EN AW-6060/6063 / EN AW-6012/ EN AW-6262/ EN AW-2011/ EN AW-6082/ EN AW-2007/ EN AW-6262R/ EN AW-2014/ EN AW-7075
Tolerances for extruded square, Hexagonale and Round bars according to en 754-4: 2008Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075
Dimension area square bars Hexagonal bars Round bars
limit measurement(permitted deviations)
limit measurement(permitted deviations)
limit measurement(permitted deviations)
from 3 to 6 0 to -0.08 0 to -0.08 0 to -0.08above 10 to 10 0 to -0.09 0 to -0.09 0 to -0.09above 10 to 18 0 to -0.11 0 to -0.11 0 to -0.11above 18 to 30 0 to -0.13 0 to -0.13 0 to -0.13above 30 to 50 0 to -0.16 0 to -0.16 0 to -0.16above 50 to 65 0 to -0.19 0 to -0.19 0 to -0.19
Dimension area square bars Hexagonal bars Round bars
alloy group alloy group alloy group
from 8 to 18 ±0.22 ±0.30from 10 to 18 ±0.22 ±0.30 ±0.22 ±0.30above 18 to 25 ±0.25 ±0.35 ±0.25 ±0.35 ±0.25 ±0.35above 25 to 40 ±0.30 ±0.40 ±0.30 ±0.40 ±0.30 ±0.40above 40 to 50 ±0.35 ±0.45 ±0.35 ±0.45 ±0.35 ±0.45above 50 to 65 ±0.40 ±0.50 ±0.40 ±0.50 ±0.40 ±0.50above 65 to 80 ±0.45 ±0.70 ±0.45 ±0.70 ±0.45 ±0.70above 80 to 100 ±0.55 ±0.90 ±0.55 ±0.90 ±0.55 ±0.90above 100 to 120 ±0.65 ±1.00 ±0.65 ±1.00 ±0.65 ±1.00above 120 to 150 ±0.80 ±1.20 ±0.80 ±1.20 ±0.80 ±1.20above 150 to 180 ±1.00 ±1.40 ±1.00 ±1.40 ±1.00 ±1.40above 180 to 220 ±1.15 ±1.70 ±1.15 ±1.70 ±1.50 ±1.70above 220 to 270 ±1.30 ±2.00above 270 to 320 ±1.60 ±2.50
61
Width thickness tolerances for Hot-rolled sheets/Plates according to en 485-3: 2008
Width thickness tolerances for Cold-rolled sheets/Plates according to en 485-4: 2008Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075
Valid for alloy groups I & II
Thicknessmm
to 1000 mm
above 1000 to 1250 mm
above 1250 to 1600 mm
above 1600 to 2000 mm
above 2000 to 2500 mm
above 2500 to 3000 mm
above 3000 to 3500 mm
I II I II I II I II I II I II I II0.2 0.4 ±0.02 ±0.03 ±0.04 ±0.05 ±0.05 ±0.06 - - - - -0.4 0.5 ±0.03 ±0.03 ±0.04 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07 ±0.10 - -0.5 0.6 ±0.03 ±0.04 ±0.05 ±0.06 ±0.06 ±0.07 ±0.07 ±0.08 ±0.11 - -0.6 0.8 ±0.03 ±0.04 ±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.12 - -0.8 1 ±0.04 ±0.05 ±0.06 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.13 - -
1 1.2 ±0.04 ±0.05 ±0.07 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.14 - -1.2 1.5 ±0.05 ±0.07 ±0.09 ±0.11 ±0.10 ±0.12 ±0.11 ±0.14 ±0.16 - -1.5 1.8 ±0.06 ±0.08 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.15 ±0.17 - -1.8 2 ±0.06 ±0.09 ±0.11 ±0.13 ±0.12 ±0.14 ±0.14 ±0.16 ±0.19 - -
2 2.5 ±0.07 ±0.10 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.20 - -2.5 3 ±0.08 ±0.11 ±0.13 ±0.15 ±0.15 ±0.17 ±0.17 ±0.19 ±0.23 - -
3 3.5 ±0.10 ±0.12 ±0.15 ±0.17 ±0.17 ±0.19 ±0.18 ±0.20 ±0.24 - -3.5 4 ±0.15 ±0.20 ±0.22 ±0.23 ±0.25 ±0.34 ±0.38
4 5 ±0.18 ±0.22 ±0.24 ±0.25 ±0.29 ±0.36 ±0.425 6 ±0.20 ±0.24 ±0.25 ±0.26 ±0.32 ±0.40 ±0.46
Thickness mm to 1250 mm above 1250 mm to 1600 mm
above 1600 mm to 2000 mm
above 2000 mm to 2500 mm
above 2500 mm to 3500 mm
2.5 4 ±0.28 ±0.28 ±0.32 ±0.35 ±0.404 5 ±0.30 ±0.30 ±0.35 ±0.40 ±0.455 6 ±0.32 ±0.32 ±0.40 ±0.45 ±0.506 8 ±0.35 ±0.40 ±0.40 ±0.50 ±0.558 10 ±0.45 ±0.50 ±0.50 ±0.55 ±0.60
10 15 ±0.50 ±0.60 ±0.65 ±0.65 ±0.8015 20 ±0.60 ±0.70 ±0.75 ±0.80 ±0.9020 30 ±0.65 ±0.75 ±0.85 ±0.90 ±1.0030 40 ±0.75 ±0.85 ±1.00 ±1.10 ±1.2040 50 ±0.90 ±1.00 ±1.10 ±1.20 ±1.5050 60 ±1.10 ±1.20 ±1.40 ±1.50 ±1.7060 80 ±1.40 ±1.50 ±1.70 ±1.90 ±2.0080 100 ±1.70 ±1.80 ±1.90 ±2.10 ±2.20
100 150 ±2.20 ±2.20 ±2.70 ±2.80 -150 200 ±2.80 ±2.80 ±3.30 ±3.30 -
above to
above to
62
teChniCAl informAtion / referenCe tABle
aluminum Properties
The indicated numbers are guidelines only.
aluminum Material abbreviation:
alloy Min.Proof stress Rp 0.2
(n/mm2)
Min. Tensile
strength Rm
(n/mm2)
Min. elon-gation
a5%
brinell hard-ness
Hbs
spec. weight
g/cm3
Thermalconduc-
tivity
W/cmxK
Coefficientof thermalexpansion
cm x K(20-100˚C)
Weldability annealing
cm/106 x ˚C
fusing-point/
interval
C˚
elastic-modulus
Kn/mm2
electricalconduc-
tivity at 20˚ ohm-
mm2
5754 H111 80 190 12 52 2.66 1.3-1.7 23.7 excellent 330-360 610-640 70 18-235083 H111 125 275 12 75 2.66 1.1-1.2 23.8 excellent 330-400 580-640 71 176082 T651 240 295 8 89 2.70 1.5-1.9 23.4 good 350-400 585-650 70 24-322017A T4 245 390 12 110 2.80 1.3-1.7 22.8 bad 350-400 512-650 72 21-282024 T3 290 440 13 110 2.77 1.3-1.7 22.8 bad 350-400 505-640 73 18-262014 T651 400 460 6 133 2.80 1.6 23.0 bad 350-400 510-640 72 23-297020 T651 270 340 8 101 2.77 1.2-1.6 23.0 good 350-400 580-650 70 18-247022 T651 350 430 5 127 2.78 1.3-1.5 23.6 bad -- 515-640 71 17-197075 T651 440 525 4 155 2.80 1.3-1.6 23.3 bad -- 500-640 72 17-207050 Hokotol 532 757 7.8 180 2.83 1.54 23.5 bad -- 560-600 70.3 23
GermanyDIn
Materialno.
Iso /en-norm
Usa UKbs
francenf
spainUne
ItalyUnI
swedensIs
Al 99.5 3.0255 1050A 1050A 1B A5 L3051 4507 4007Al 99.7 3.0275 1070A 1070A - A7 - - 4005Al 99.8 3.0285 1080A 1080A 1A A8 - - 4004Al 99.0 3.0205 1200 1200 1C A4 - - 4010E-Al 99.5 3.0257 1350A 1350A 1E A5L L3052 - 4008AlCuMgPb 3.1645 2007 2007 - A-U4Pb L3121 - 4335AlCuBiPb 3.1655 2011 2011 FC1 A-U 4Pb L3192 6362 4355AlCuSiMn 3.1255 2014 2014 - - - - 4338AlCuMg 1 3.1325 2017A 2017A H14 A-U4G L3120 3576 -AlCuMg 2 3.1355 2024 2024 H16 A-U4G1 - - -AlMn 3.0515 3003 3003 N3 - - - 4054AlMg1 3.3315 5005 5005 - - - - 4106AlMg5 3.3555 5019 5019 N6 A-G5 - - -AlMg2.5 3.3523 5052 5052 N4 - - - 4120AlMg 4.5 Mn 3.3547 5083 5083 N8 5083 L3321 7790 4140AlMg3 3.3535 5754 5754 N5 A-G3M L3390 3575 4125AlMgSi0.7 3.3210 6005 6005 - - - - 4107AlMgSiPb 3.0615 6012 6012 - - - - 4212PbAlMgSi0.5 3.3206 6060/63 6060/63 H9 A-GS L3441 3569 4104AlMg1SiCu 3.3211 6061 6061 H20 - - - -AlMgSi1 3.2315 6082 6082 H30 A-SGM 0.7 L3451 3571 4212AlZn 4.5 Mg 1 3.4335 7020 7020 H17 A-Z5G L3741 7791 4425AlZnMgCu 0.5 3.4345 7022 7022 - A-Zn5 GU 0.6 - - -AlZnMgCu 1.5 3.4365 7075 7075 2L95 A-Zn5 GU L3710 3735 -
63
Reference Table DIn-standard / en-standardApproximate comparison, as EN-standard cannot replace DIN-standard.
k = Cold-rolled • V = Hot-rolled
Temper Description Comparison DIn-standard - en-standard
Type alloy Properties TolerancesDIn en DIn en DIn en
Al99.5EN AW-1050A
kV
1712 573-3 1745 485-1/2 178359600
485-4485-3
AlMg3EN AW-5754
kV
1725 573-3 1745 485-1/2 178359600
485-4485-3
AlMg4.5MnEN AW-5083
kV
1725 573-3 1745 485-1/2 178359600
485-4485-3
AlMgSi1EN AW-6082
kV
1725 573-3 1745 485-1/2 178359600
485-4485-3
AlZnMgCu1.5EN AW-7075
k 1725 573-3 1745 485-1/2 59600 485-3
AlMg1EN AW-5005
k 1725 573-3 1745 485-1/2 1783 485-4
Tread Plate AlMg3EN AW-5754
1725 573-3 59605 1386 59605 1386
Round Bars DrawnExtruded
1725 573-3 1747 754-1/2755-1/2
17981799
754-3755-3
Square Bars DrawnExtruded
1725 573-3 1747 754-1/2755-1/2
179659700
755-4755-4
Hexagonal Bars DrawnExtruded
1725 573-3 1747 754-1/2755-1/2
179759700
754-6755-6
Flat Profiles 1725 573-3 1747 755-1/2 1770 755-5Angle Profiles 1725 573-3 1748 755-1/2 1771U-Profiles 1725 573-3 1748 755-1/2 9713T-Profiles 1725 573-3 1746 755-1/2 9714Round Tubes 1725 573-3 1746 755-1/2 9107 755-8Square Tubes 1725 573-3 1748 755-1/2 1748 755-8
DIn-standardmaterial no.
en-standard1994
Temper Temper Description Comparison DIn-standard - en-standard
al99.5-1050a alMg1-5005a alMg3-5754 alMg4.5Mn-5083 alMgsi1-6082
x.xxxx.07xxxx-H112 Hot-rolled with prescribed
strength value
.08-F Hot-rolled without prescribed
strength value
.10-0 Soft
non-hardable alloys W7 - 0 W11 - 0 W19 - 0 W28-0
.10-H111 Soft, stretch-straightened
non-hardable alloys W19 - H111 W28 - H111
.10-0 Soft
hardable alloys W - 0
.24-H12 Cold-rolled
to 1/4 hard F9 - H12 F13 - H12 F22 - H12
.26-H14 Cold-rolled
to 1/2 hard F11 - H14 F15 - H14 F24 - H14
.30 Cold-rolled to 1/1 hard F15 - H18 F19 - H18 F29 - H18
.25-H22/H32 Cold-rolled, annealed
to 1/4 hard G9 - H22/H32 G13 - H22/H32 G22 - H22/H32 G31 - H22/H32
.27-H24/H34 Cold-rolled, annealed
to 1/2 hard G11 - H24/H34 G15 - H24/H34 G24 - H24/H34 G35 - H24/H34
.29 -H26/H36 Cold-rolled, annealed to 3/4 hard G17 - H26/H36 G27 - H26/H36
.31 -H28/H38 Cold-rolled, annealed to 1/1 hard F21 - T4/T451
.51 -T4/T451 Cold-hardened
.53 -T3/T351 Cold-hardened with fiber structure
.71 -T6/T651 Temper-hardened F28 - T6/T651
.72 -T6/T651 Temper-hardened F32 - T6/T651
64
teChniCAl informAtion
en 515Temper Definition
F1) As fabricated (no mechanical property limits specified).
O2) Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper.
O1 Thermally treated at approximately the same time and temperature required for solution treatment and slow cooled to room temperature (formerly designated as T41).
O2 Thermomechanically processed to enhance formability, such as required for super-plastic forming (SPF).
O3 Homogenized.
H12 Strain-hardened - 1/4 hard.
H14 Strain-hardened - 1/2 hard.
H16 Strain-hardened - 3/4 hard.
H18 Strain-hardened - 4/4 hard (fully hardened).
H19 Strain-hardened - extra hard.
Hxx4 Applies to embossed or patterned sheet or strip, fabricated from the corresponding Hxx temper.
Hxx5 Strain-hardened - applies to welded tubes.
H111 Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.
H112 Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified).
H116 Applies to Aluminum-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified.
H22 Strain-hardened and partially annealed - 1/4 hard.
H24 Strain-hardened and partially annealed - 1/2 hard.
H26 Strain-hardened and partially annealed - 3/4 hard.
H28 Strain-hardened and partially annealed - 4/4 hard (fully hardened).
H32 Strain-hardened and stabilized - 1/4 hard.
H34 Strain-hardened and stabilized - 1/2 hard.
H36 Strain-hardened and stabilized - 3/4 hard.
H38 Strain-hardened and stabilized - 4/4 hard (fully hardened).
H42 Strain-hardened and painted or lacquered - 1/4 hard.
H44 Strain-hardened and painted or lacquered - 1/2 hard.
H46 Strain-hardened and painted or lacquered - 3/4 hard.
H48 Strain-hardened and painted or lacquered - 4/4 hard (fully hardened).
W Solution heat-treated (unstable temper). The period of natural ageing (W2h..) may also be specified.
W51 Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for hand or ring forging and rolled ring). The products receive no further straightening after stretching.
W510 Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 1% to 3% for extruted rod, bar, shapes and tube, 0.5% to 3% for drawn tube). The products receive no further straightening after stretching.
W511 Same as W510 except minor straightening is allowed after stretching to comply with standard tolerances.
W52 Solution heat-treated (unstable temper) and stress-relieved by compressing to produce a permanent set of 1- 5%.
W54 Solution heat-treated (unstable temper) and stress-relieved by restriking cold in the finish die (die forging).
T1 Cooled from an elevated temperature shaping process and naturally aged.
T2 Cooled from an elevated temperature shaping process, cold worked and naturally aged.
T33) Solution heat-treated, cold worked and naturally aged.
T31 Solution heat-treated, cold worked approximately 1% and naturally aged.
T351 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching.
T3510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T3511 Same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T352 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
65
en 515Temper Definition
T354 Solution heat-treated stress-relieved by restriking cold in the finish die and naturally aged.
T36 Solution heat-treated, cold worked approximately 6% and naturally aged.
T37 Solution heat-treated, cold worked approximately 7% and naturally aged.
T39 Solution heat-treated and cold worked to an appropriate degree to achieve the specified mechanical properties. Cold work may be carried out before or after natural ageing.
T44) Solution heat-treated and naturally aged.
T42 Solution heat-treated and naturally aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user.
T451 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and natural-ly aged. The products receive no further straightening after stretching.
T4510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T4511 Same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T452 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
T454 Solution heat-treated, stress-relieved by restriking cold in the finish die and naturally aged.
T5 Cooled from an elavated temperature shaping process and then artificially aged.
T51 Cooled from an elavated temperature shaping process and then artificially aged in underageing conditions to improve formability.
T56 Cooled from an elevated temperature shaping process and then artificially aged - mechanical property level higher than T5 achieved through special control of the process (6000 series alloys).
T65) Solution heat-treated and then artificially aged.
T61 Solution heat-treated and then artificially aged in underageing conditions to improve formability.
T6151 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching.
T62 Solution heat-treated and then artificially aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user.
T64 Solution heat-treated and then artificially aged in underageing conditions (between T6 and T61) to improve formability.
T651 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially aged. The products receive no further straightening after stretching.
T6510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T6511 Same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T652 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged.
T654 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T66 Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys).
T7 Solution heat-treated and then artificially overaged.
T73 Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance.
T732 Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user.
T7351 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ringand then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching.
T73510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching.
T73511 Same as T73510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7352 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi- cially overaged in order to achieve the best stress corrosion resistance.
T7354 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged in order to achieve the best stress corrosion resistance.
66
teChniCAl informAtion
en 515Temper Definition
T74 Solution heat-treated and then artificially overaged (between T73 and T76).
T7451 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching.
T74510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube 0.5% to 3% for drawn tube) and then artificially overaged (between T73 and T76). The pro- ducts receive no further straightening after stretching.
T74511 Same as T74510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7452 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged (between T73 and T76).
T7454 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged (bet- ween T73 and T76)
T76 Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T761 Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistan- ce. (applies to 7475 sheet and strip).
T762 Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistan- ce. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any tem- per by the user.
T7651 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching.
T76510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve a good exfoli- ation corrosion resistance. The products receive no further straightening after stretching.
T76511 Same as T76510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7652 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T7654 Solution heat-treated, stress-relieved by restriking in the finish die and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T79 Solution heat-treated and then artificially overaged (very limited overageing).
T79510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged (very limited overageing). The products receive no further straightening after stretching.
T79511 Same as T79510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T86) Solution heat-treated, cold worked and then artificially aged.
T81 Solution heat-treated, cold worked and then approximately 1% and then artificially aged.
T82 Solution heat-treated by the user, controlled stretched with a minimum permanent set of 2% and then artifi - cially aged (alloy 8090).
T832 Solution heat-treated, cold worked a controlled specific amount and then artificially aged (applies to 6063 drawn tube).
T841 Solution heat-treated, cold worked and then artificially underaged (sheet and strip in alloys 2091 and 8090).
T84151 Solution heat-treated, stress-relieved by stretching with a permanent set of 1.5% to 3% and then artificially underaged (plate in alloys 2091 and 8090).
T851 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching.
T8510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, profiles and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T8511 Same as T8510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T852 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged.
T854 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T86 Solution heat-treated, cold worked approximately 6% and then artificially aged.
T87 Solution heat-treated, cold worked approximately 7% and then artificially aged.
T89 Solution heat-treated, cold worked to an appropriate degree to achieve the specified mechanical properties and then artificially aged.
T9 Solution heat-treated, artificially aged and then cold worked.
67
termS of SAle And delivery
1. ValidityThe present Terms of Sale and Delivery shall apply to all quotations, sales and deliveries unless other-wise agreed in writing.Any terms of sale and delivery which may be printed on the order confirmation or to which the customer otherwise refers shall only be valid if this is expressly stated in our order confirmation.
2. Product InformationAll information about weight, dimensions and quality as well as technical data and other data stated in catalogues, prospectuses and any other advertising material shall be directional and shall only be binding to the extent they form an express part of the agre-ement between the parties.
3. QuotationsAll prices shall be subject to changes in raw material and exchange rates, delivery time subject to the goods being unsold and change of delivery time from works. If all Seller gives a written quo tation which does not state a specific time stipulated for acceptance, the quotation shall lapse if acceptance has not been received by the Seller within 2 weeks from the date of quotation.
4. QualityBuyer shall be responsible for ensuring that the technical data and the material in its entirety are suitable for his requirements.A certificate will as agreed be enclosed in accor-dance with agreement. Seller will check that the certificate meets the demands for the delivery but will not check the information provided in the certifi-cate.
5. QuantityThe total quantity delivered shall be subject to a margin of plus/minus 10% of the quantity specified.Calculation by weight, unit or length shall be in accordance with generally accepted practice.
6. orders and agreementIn order to be binding on Seller, an order shall be confirmed in writing by Seller, and only Seller´s Terms of Sale and Delivery shall apply to the exe cution of the order.If Buyer has any objections to the contents of the order confirmation these shall be made in writing and shall be received by Seller not later than one week after the date of the order confirmation.
7. Prices and DeliveryIn connection with sales from stock, the prices excl. VAT and terms of payment are stated in Seller´s cur-rent price list in force at the time in question shall apply. Delivery shall be ex Seller´s address. Freigt payable by Buyer shall always be invoiced Buyer and shall not be paid in cash on receipt.
8. PaymentSeller shall receive payment on the date specified in the invoice as the final due date for payment. If such a date has not been specified payment shall be made in cash on delivery. However, Seller reser ves the right to change the terms of payment if Seller receives information that Buyer´s ability to pay has deteriorated. If the delivery is postponed because of Buyer´s situation (claimant´s default), Buyer shall nevertheless, unless otherwise notified by Seller, be under an obligation to make any payment to Seller as if delivery had been made at the agreed time. If payment is made after the due date, Seller shall be entitled to charge interest on the outstanding amount from time to time from the due date at the rate of interest stated on the invoice at any given time. Buyer shall not be entitled to offset any counterclaims against Seller which have not been recognized in writing by Seller and shall not be entitled to withhold any part of the purchase price because of countercla-ims of any kind whatsoever.
9. Retention of TitleSeller shall retain title to the goods sold with the restrictions that follow from mandatory rules of law until the full purchase price plus any costs accrued have been paid to Seller or to the party to whom Seller has assigned his right.
10. DeliveryDelivery shall be made from Seller´s address whether or not Seller delivers the goods sold to Buyer using his own employees or third party in accordance with a separate agreement. The time of de livery has been fixed by Seller at Seller´s best esti mate with the reservations made when the quotation was given/the agreement was entered into.In connection with sale of goods from stock and standard goods, a postponement of the time of delivery by 30 days due to Seller´s situation shall be regarded as delivery in due time and shall be respected to the effect that Buyer cannot exercise any remedies against Seller for this reason unless otherwise agreed.In connection with sale of individually manufactured goods, Seller shall not be liable for any form of delay irrespective of the duration hereof to the effect that Buyer cannot exercise any remedies against Seller for this reason. Each of the parties shall, however, be entitled, without any liability, to cancel the agree-ment if the delay exceeds three months.If a delay in delivery is due to Seller being in a situ-ation as stated in Clause 15 (exemption from liabili-ty), the time of delivery shall be postponed by the time of duration of the obstacle. However, both parties shall, without any liability, be entitled to can-cel the agreement if the obstacle has lasted for more than 3 months. The present provision shall apply whether or not the cause of delay occurs before or after the expiry of the agreed delivery time.In the above case, Seller shall notify Buyer of the change in delivery time without undue delay.
11. PackagingPackaging shall be on Buyer´s account unless it is expressly stated that this has been included in the price.Packaging may only be returned in accordance with a separate agreement.
12. CancellationIn connection with cancellation of deliveries, Buyer shall be under an obligation to pay full compensati-on, including for loss of profit, and gene rally to indemnify Seller for all costs incurred in connection with the cancellation.
13. Product changesSeller reserves the right to make changes to agreed specifications without notice if this can be done witout any inconvenience to the Buyer.
14. Defects and ComplaintsUpon delivery, Buyer shall immediately perform such inspection of the goods sold as generally accepted business practice requires. Any defects in the goods sold will, within a reasonable period of time, be remedied or a replacement delivery will be made at Seller´s discretion.If such remedial action is not taken or a replacement delivery is not made within a reasonable period of time, Buyer shall be entitled to termina te the agree-ment, require a reduction in the pur chase price or claim damages pursuant to with the general rules of Danish law and the present Terms of Sale and Delivery.If Buyer wants to claim a defect, Buyer shall notify Seller hereof in writing immediately after the defect has been or should have been discovered and spe-cify the nature of the defect in the written notificati-on. Samples of a sufficient quantity for a certain assessment of the justification of the complaints must be enclosed with complaints about the quality of the goods. If Buyer has discovered or should have discovered the defect, and he does not submit a
complaint in accordance with the above, he cannot subsequently make a claim about the defect.If Buyer has not made a claim about the defect to Seller within 6 months from the date of delivery, he cannot subsequently claim any such defect.If remedial action has been taken or a replacement delivery has been made, Seller´s liability for defects cannot be extended to more than 1 year from the original date of delivery.
15. limitation of liabilityA claim for damages against Seller cannot exceed the invoice amount for the product sold.Seller shall not be liable for any consequential loss, loss of profit or any other indirect loss which follows from the agreement, including any indirect loss which has incurred as a result of delay or defe cts in the goods sold. The following circumstances shall result in exemption of liability for Seller if they prevent performance of the agreement or make the perfor-mance of the agreement unnecessarily onerous.Industrial disputes and any other circumstances beyond the control of the parties such as fire, war, mobilisation or unforeseen military call-ups of an equivalent extent, requisitioning, sequestration, exchange controls, riots and civil unrest, shortage of transport possibilities, general scarcity of goods, fuel restrictions and defects in or delays in deliveries from sub-suppliers which are due to any of the cir-cumstances set out in the present Clause. Circumstances like those set out above which occu-red before the quotation was given/the agreement was entered into shall only entail exemp-tion of liability if their effect on the performance of the agreement could not have beeen foreseen at the time in question.Seller shall be under an obligation to notify Buyer in writing without undue delay should any such cir-cumstances occur.
16. Product liabilitySeller shall only be liable for personal injury if it is proved that the injury was suffered as a result of errors or omissions on the part of Seller or other parties for whom, Seller is responsible.Seller shall not be liable for any damage to real pro-perty or movable property.Seller shall not be liable for any consequential loss, loss of earnings or any other indirect loss.To the extent to which Seller may incur product lia-bility vis-à-vis a third party, Buyer shall be under an obligation to indemnify Seller to the same extent as Seller´s liability is limited in accordance with the above three sentences. If a third party makes a claim against one of the parties for liability for damages in a c c o r d a n c e w i t h t h e present Clause the party in question shall immedia-tely notify the other party.Seller and Buyer shall be under a mutual obligation to accept that legal proceedings are instituted against them at the court which hears claims for damages brought against one of them on the basis of damage or injury allegedly caused by the delivery.These limitations to Seller´s liability shall not apply if he has shown gross negligence.
17. ReturnsReturns will only be accepted in accordance with a special agreement on this with Seller.Unless otherwise agreed, crediting of returns shall be subject to the returns being undamaged and as for works/factory-packaged materials that they are in original, unbroken packaging.
18. DisputesAny disputes arising between the parties shall be settled by the courts in Bremen pursuant to German law.
| Aluminum Sheets/Plates
| Aluminum Coils
| Aluminum Tread Plates
| Aluminum Ricecorn Sheets
| Aluminum Gangway Profiles
| Aluminum Bars
| Aluminum Profiles
| Aluminum Round Tubes
| Aluminum Tubes
| Aluminum - Fittings
| Aluminum - Cargo Sections
| Aluminum/Steel - Joint Compositions
| Aluminum - Strongbacking
| Aluminum - Special Profiles
Paul-Feller-Str. 19 | 28199 Bremen | Germany
tel +49 (0) 421 / 793 07 - 500 fax +49 (0) 421 / 793 07 - 599
mail [email protected] web www.alcobra.de