LOGO
Design and Realization of CDIO Elements in Civil Engineering
Material Course
Gengying LI, Yunping Yang, Guangjing XiongDept. of Civil Eng.
Shantou University
CDIO logo source: www.cdio.org
CEM course before reform
COURSE OBJECTIVESCOURSE OBJECTIVES : Enable students to understand, choose, mix and apply various Enable students to understand, choose, mix and apply various
materials correctlymaterials correctly
CONTENT:
TEACHING AND LEARNING METHOD::
ASSESSMENT :
Before reform
Content of CEM course before reform
THEORETIC KNOWLEDGETHEORETIC KNOWLEDGE :: Chapter 1 Basic Properties of Materials Chapter 2 Air Hardening Inorganic Binding Materials Chapter 3 Cement Chapter 4 Ordinary Concrete Chapter 5 Construction Mortar Chapter 6 Wall Materials Chapter 7 Building Steels Chapter 8 Water Proofing Materials Chapter 9 Bituminous MixtureEX PERIM ENT ::
Before reform
Re. Training Aim and Course Synopsis of Civil Engineering for Higher Education, China Construction Industry Published, 2002.11.
TEACHING AND LEARNING METHODTEACHING AND LEARNING METHOD
Basic theoretical principles and knowledge---Basic theoretical principles and knowledge---was accomplished through classroom was accomplished through classroom teaching for 38 hoursteaching for 38 hours
Experiment----was accomplished through Experiment----was accomplished through demonstrated and validated for 10 hoursdemonstrated and validated for 10 hours
Before reform
ASSESSMENT :
Based on a written examinationBased on a written examination An experimental report at the end of the An experimental report at the end of the
semestersemester
Before reform
CEM course after reform
COURSE OBJECTIVESCOURSE OBJECTIVES :
CONTENT:
TEACHING AND LEARNING METHODTEACHING AND LEARNING METHOD :
ASSESSMENT :
COURSE OBJECTIVESCOURSE OBJECTIVES
Understand and apply materials correctly;
Understand and practice the process of designing and developing materials;
Develop CDIO competencies through a teamwork re-design project.
Before reform
Content of CEM course after reform
THEORETIC KNOWLEDGETHEORETIC KNOWLEDGE: Basic principles and knowledge: the same
as reform before an extension knowledge :
• Knowledge on environmental friendly insulating materials
• Heat preservation and energy-efficient materials• …….
TEAMWORK REDESIGN PROJECTSTEAMWORK REDESIGN PROJECTS ::
After reform
TEACHING AND LEARNING METHODTEACHING AND LEARNING METHOD
Basic theoretical principles and knowledge---- was Basic theoretical principles and knowledge---- was accomplished through classroom teaching for 24 accomplished through classroom teaching for 24 hours and self learning;hours and self learning;
Extension knowledge --- was accomplished Extension knowledge --- was accomplished through classroom discussions for 10 hours and through classroom discussions for 10 hours and self learning ;self learning ;
A teamwork re-design projectA teamwork re-design project---- was was accomplished through self learning, team accomplished through self learning, team discuss, conceive, design, implement, discuss and discuss, conceive, design, implement, discuss and display their products in classroom, then amend display their products in classroom, then amend their project and follow another CDIO till to fulfil their project and follow another CDIO till to fulfil their aim.their aim.
After reform
ASSESSMENT :
Classroom examination
Design report and display of products
Routine performance
After reform
CDIO PROCESS
After reform
Value
Products
Reference reading
Conceive
Discussion
Design
Implement
Operate
PROJECT
Project Examples
Un-fired bricks
Concretes used for underground structureConcretes used for underground structure
Waterproof materialsWaterproof materials
High temperature resistance concretesHigh temperature resistance concretes
After reform
Un-fired bricks
Bricks were developed by using shell-lime and fly ash which considering social and resource problem. And the new brick is an environmental friendly insulating material.
Results of re-design
After reform
Compressive strength (MPa)
Flexural strength (MPa)
1st design 25.4 2.8
2st design 38.7 3.4
3st design 40.2 4.1
Un-fired bricksMixture
planning--- Conceive and
design
Manufacture-- ImplementTesting---
Implement
Products
After reform
CDIO Process for developing unfired brick---step 1
1st, accomplished reference reading and comprehending
2nd, selected raw materials and designed mixture based on the principles of environmental protection and energy-saving.
3rd, applied the first mixture and found that the w/c ratio was high, leading to lower strengths, as shown in Fig.1.
After reform
1st mix design
CDIO Process for developing unfired brick---step 2
1st, a further reference reading, team discussion and teachers` suggestions---to modified their mixture
2cd, selected raw materials according to the modified mixture.
3rd, applied the second mixture.
After reform
2nd mix design
Polymer was added, the w/c ratio was reduced
CDIO Process for developing unfired brick---step 3
After the test and analysis for the second designed mixture, the third designed mixture was proposed by the students as shown in Fig.3.
After reform
3rd mix design
Comments from students
Through this project I further realize the virtue of CDIO Through this project I further realize the virtue of CDIO approach. approach.
In the approach we learned how to study, how to In the approach we learned how to study, how to communicate and how to cooperate. communicate and how to cooperate.
I have gotten a deeper appreciation of a civil engineer. I have gotten a deeper appreciation of a civil engineer.
I realize that we need not only to posses a rich, I realize that we need not only to posses a rich, comprehensive professional knowledge, but also, more comprehensive professional knowledge, but also, more
importantly, to be professional in learning and conductimportantly, to be professional in learning and conduct
——Dehua Wang
After reform
It is true that do more, learn more. We should pay It is true that do more, learn more. We should pay more attention to practical abilities, such as more attention to practical abilities, such as independent thinking and self-learning. independent thinking and self-learning.
Teamwork is not a work easy to be done; each Teamwork is not a work easy to be done; each member of a team must have his own unique member of a team must have his own unique insight in order to complete the project perfectly. insight in order to complete the project perfectly.
How to communicate effectively, how to screen the How to communicate effectively, how to screen the useful knowledge, and how to use knowledge are useful knowledge, and how to use knowledge are all great challenges for us. all great challenges for us.
It is true that practice is the sole criterion for It is true that practice is the sole criterion for
testing truth.testing truth.
Comments from students
——Ynhai Liu
After reform
Comments from students
The teamwork re-design project of CEM makes us really go into the construction practice.
We resisted at first doing this project because we thought the experiment being hard, dirty and tired.
However, during the project process we really felt the joy of the harvest of working hard, and understood the knowledge more deep-set through learning from practice.
Here, I show my thanks to Teacher Li for providing us the good guidance, and I also thank my classmates for their good ideas to amend my project.
After reform
——Lihua Chen
Benefits and Conclusion
Master a deeper knowledge of CEM than before.Master a deeper knowledge of CEM than before.
Innovative ideology, analysis ability, system Innovative ideology, analysis ability, system thinking, experimentation and knowledge thinking, experimentation and knowledge discovery were effectively enhanced.discovery were effectively enhanced.
Ability to communicate with others and Ability to communicate with others and capability of self-learning were improved.capability of self-learning were improved.
Strongly value the importance of teamwork and Strongly value the importance of teamwork and how to collaborate with others.how to collaborate with others.
After reform