LogixPro Introduction
Download trial for your computer, if desired.
Starting the LogixPro App on Lab Computers
Right-Click on the Wizard and “Hide”, if desired
Write the PLC Ladder Logic ProgramTurn on/off light with a switch.
Toggle to Download Screen – Download - Run
Operate the system – Click the switch
Click the switch again
Demonstrate PLC Logic – Add a normally closed (NC) switch– Add STOP Instruction
Right-click the instruction – Edit Symbol – “STOP” and “START”:
Latch Rung Add a BRANCH to the rung.
Select an Internal Bit Address
Examine Memory Tables
Instruction is TRUE if Memory Bit is 0
Latch Demonstration
Demonstrate the LogixPro-Door Exercise