LiBAL i-BMS15™Integrated Battery Management System for 15 cells
SAFETYASIL C safety rated key componentsSelf-test and redundancy in safety critical measurement circuitsAdvanced SoX algorithmsOpen circuit detection
BATTERY LIFEHigh frequency sampling of current (100ms)allows optimal detection of pulsesPowerful and intelligent passive balancing at 200mA per cell
PERFORMANCESOC accuracy of ±3%SOH accuracy of ±2% point from 80% SOHAuto-off/sleep mode enables low power consumption in idle mode±1 °C accuracy in temperature measurement
USABILITYRTC + logging of events, errors, and warningsBMS Creator PC tool for easy configurationOn-board current sensingOn-board mosfet power switchesCAN UDS toolParallel pack capabilityHot swap functionality
Applications
INTRODUCTIONThe i-BMS is a cell chemistry agnostic, compact integrated BMS developed for the cost-optimized mass-production of Light Electric Vehicle (LEV) applications. It can monitor up to 15 cells in series, covering applications up to 60V, such as 2-, and 3-wheelers, ESS, AGVs, and robotics.
While measuring only 65 x 200 mm, the i-BMS is equipped with everything it needs to manage and maintain a battery system without the need for any external components. This includes a built-in pre-charge circuit, on-board current meas-urement, mosfet power switches for battery disconnect, and a DC/DC power supply.
PassengerCar Truck Battery Performance
Industrial Drone
Cleaning machines BusAGV (Automated guided vehicle)
Train Forklift Marine Vessel
Motorbike Scooter Battery Safety
Charge Eciency
3-Wheeler
UtilityVehicle
Battery Life
PassengerCar Truck Battery Performance
Industrial Drone
Cleaning machines BusAGV (Automated guided vehicle)
Train Forklift Marine Vessel
Motorbike Scooter Battery Safety
Charge Eciency
3-Wheeler
UtilityVehicle
Battery Life
PassengerCar Truck Battery Performance
Industrial Drone
Cleaning machines BusAGV (Automated guided vehicle)
Train Forklift Marine Vessel
Motorbike Scooter Battery Safety
Charge Eciency
3-Wheeler
UtilityVehicle
Battery Life
PassengerCar Truck Battery Performance
Industrial Drone
Cleaning machines BusAGV (Automated guided vehicle)
Train Forklift Marine Vessel
Motorbike Scooter Battery Safety
Charge Eciency
3-Wheeler
UtilityVehicle
Battery Life
The i-BMS’ software design features parallel pack and hot swap capability, while advanced SoX algorithms ensure high precision. Using the BMS Creator™ configuration software, the i-BMS allows the battery designer to create a unique battery by defining application-specific BMS param-eters and safety strategy, optimizing battery performance and battery life.
Using its safety-rated, powerful dual core lockstep CPU and ASIL C compliant ASIC, the i-BMS can reach temperature accuracy up to +/-1 °C and cell voltage measurement accuracy of +/- 1.6 mV, throughout the entire temperature range (-10 to +70 °C).
Litt
. no.
LIT
XXXX
LiBAL i-BMS15™Integrated Battery Management System for 15 cells
PARAMETERS SPECIFICATIONSSOC accuracy ±3%
Performan
ceHa
rdw
are
Software
Communication CAN communication CAN 2.0 A/B; 11 bit and 29 bit ID’sCharger Control Interface, Diagnostics Interface CAN, CAN UDSParallal pack / “Hot Swap” functionality Yes, 6 battery packsAdjustable freeze frame memory Yes - Defaults to 18s of data with 150 entry samples leading to eventSOP estimation based on cell degradation Yes – 3 configurable time intervalsDC/DC auto-off shut-down Yes
[email protected]: +45 5851 5104
LiTHIUM BALANCE A/SHassellunden 13 2765 Smørum, Denmark
39.00200.00
15.00
6.25
151.0044.00
5.00
10.07
65.00
35.60
i-BMS15 Dimensions in MM
SOH accuracy ±2% -point from 80% SOCBalancing efficiency 200mA per cellAccuracy of HV measurement ±100 mVAccuracy of temperature measurement (NTC) ±1 °C (from -10 to 70 °C)Standby consumption (sleep mode) <0.5 mWActive consumption <3 WCell balancing current 200 mACell voltage, current, and temperature sampling frequency 100 mSSingle cell voltage measurement accuracy (0,5 – 4,5 Vdc) ±1.6 mV (at 25 °C) Current measurement accuracy ±0.5% @ 120ARange of temperature measurements From -40 to +120 °CNumber of Voltage channels 8-15 channelsRange of HV measurement 17-60 VdcDetectable cell voltage range 0-5 VdcMaximum current, continuous (Without active cooling) 100 APeak current in maximum 10 seconds 150 ADimensions (L x W x H) & weight 200 x 65 x 18 mm, 93gTemperature channels 4 on-board, 6 external (NTC)On-board current measurement Yes - Auto-calibrated on-board shuntOn-board power disconnect YesCAN ports 1On-board RTC YesPre-charge control on board Yes – 300 mS for 7 mF via 10 ΩBi-directional current protection YesNumber of General Purpose Outputs 4 independent open drain outputsMaximum drain voltage of General Purpose Outputs 36V (max 30V)Maximum guaranteed GPO continuous drain current 0.7A (max 0.5A)
Recommended
