®
Edition 06.2017Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
Contents
Quality “Made by Layher” 4
More speed 5
More experience 5
More knowledge 5
More clarity 5
More quality 5
COMPANY
Scaffolding base plates 8
Software for scaffolding construction 51
SCAFFOLDING BASIS
Vertical support elements 10
Horizontal support elements 12
Diagonal bracing 16
Scaffolding decks, O-suspension 18
Steel planks, gap decks 20
Toe boards 22
BASIC COMPONENTS
2
3
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Couplers 24
Spare parts, accessories, anchoring 24
Brackets 26
Confort stairway 28
Stairway ascents, outside accesses 30
FW and Bridging System 36
STAR frame 40
Shoring, construction stairtowers 42
Safety gear, railing clamp 46
Mobile scaffolds, pallets, tools 48
EXTENSION COMPONENTS
NOTICEPRODUCT- PORTFOLIO
3
All dimensions and weights are guideline values. Subject to technical modification.
Steel components are galvanzied according to EN ISO 1461 and DASt guideline 022. Connection parts are galvanized according to EN ISO 4042.
Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. These include the following provisions: The place of performance is Gueglingen-Eibensbach. Title to the delivered goods shall be retained until full payment has been made.
Please request the specific instructions for assembly and use when ordering. Protected by copyright. Not to be reproduced, either in whole or in part. Misprints and errors excepted.
The Layher product range – all catalogues at a glance
Speedyscaf System
Allround Scaffolding System
System-free Accessories
Protective Systems
4
Layher
Headquarter in Eibensbach
Plant 2 in Gueglingen
QUALITY MADE BY LAYHER
HERE IS THE BEATING HEART OF LAYHER.
Quality made by Layher comes from Gueglingen-Eibensbach. Our company
has set down deep local roots since it was established. Right up until today,
development, production, logistics and management are all in one place, where
the conditions are best for achieving quality made by Layher: in Gueglingen-
Eibensbach. The two locations together cover a surface area of 318,000 m².
This includes more than 142,000 m² of covered production and storage areas.
This is where our scaffolding systems are created by highly automated
production. Short distances and short reaction times mean we can adapt
production to suit our customers’ requirements, flexibly and at any time.
MORE POSSIBILITIES. THE SCAFFOLDING SYSTEM.
This brand promise made by Layher is the expression of a brand philosophy that
we’ve been living by for over 70 years. More speed, more safety, more proximity,
more simplicity and more future: values with which we strengthen our customers’
competitiveness in the long term. With our innovative systems and solutions,
we’re working all the time on making scaffolding construction even simpler, even
more economical and, above all, even safer. With comprehensive services, a
permanent range of training courses and an ethos of customer focus, more than
1,500 dedicated Layher employees are creating more possibilities for our
customers every single day. In more than 35 countries all over the world.
MORE INFORMATIONDiscover the world of Layher in its
company film at:
yt-image-en.layher.com
5
More Possibilities. The Scaffolding System.
MORE SPEEDWe can supply any required quantity of the right products at the right time – to anywhere in
the world. Layher has subsidiaries in more than 35 countries in all five continents, with a
tight-knit network of national service centers. Speed is also the motto of our logistics
concept. Customers have the choice of picking up their material at a Layher service center or
having it delivered either to a warehouse or “just in time” directly to the site.
MORE EXPERIENCETradition has grown into experience and expertise. Our experts pass on this knowledge – all
over the world. Existing customers might want to try a different approach, while new
customers might need support when assembling a Layher scaffolding structure. Layher’s
specialists get to grips with the specific tasks and requirements, devising for our customers
persuasive solutions that are both profitable and efficient. Good advice from Layher is
guaranteed. We take care of our customers at every level, because cooperation with them on
the basis of mutual trust as well as their success are important to us.
MORE KNOWLEDGEFurther training is the key to success. For this reason, Layher organizes regular training
seminars that prepare our customers for current and future challenges specifically in
scaffolding. This training scheme is backed up by many others options, for example practical
product training courses and regular meetings for scaffolding erectors to promote the flow of
information between experts and colleagues. And last but not least, Layher offers
comprehensive publications on all topics to do with scaffolding construction.
MORE CLARITYSaving time, using material in the best way, improving logistics. All that can be done with
Layher’s planning software, LayPLAN, or the special Layher tools for AutoCAD®. Layher
software means greater reliability when budgeting and planning scaffolding construction
projects. Optimization of inventory management and complete cost transparency for the
material used in a project. Once the dimensions and the required assembly variant have been
entered, the Layher software supplies a scaffolding proposal with matching material list
within seconds.
MORE QUALITYPeople talk a lot about quality. We just produce it. Quality from Layher means state-of-the-art
production processes, carefully selected materials, smart automation and a highly qualified
workforce. Our products comply with the very latest security standards and possess DIN ISO
certification, German TÜV approval, and many other German and international quality labels.
21,000 kilometres of steel tubing in high-quality workmanship are convincing testimony to
Layher’s quality standards.
6
Allround Scaffolding
The unique combination of positive and non-positive connections in rapid bolt-free system
technology with AutoLock function permits connections that are automatically right-angled,
obtuse-angled and acute-angled as required, with built-in safety at the same time.
Layher Allround Scaffolding has become a synonym in the marketplace for
modular scaffolding.
This original system has been continually improved since it was launched in 1974,
and offers an unmatched variety of uses: at every construction site, in industry,
chemical plants, power stations, shipyards and for events. As scaffolding for working,
protection, façades or for support, as internal or birdcage scaffolding, or as rolling towers.
Even with very difficult layouts and architecture styles and with heightened safety require-
ments, Allround Scaffolding is always the fastest, safest and most economical solution.
THE VERSATILE SOLUTION: LAYHER ALLROUND SCAFFOLDING®.
YOUR BENEFITS AT A GLANCE2 Higher fitting performance and higher and more shipping space thanks to special high-tensile steel and constructive improvement, reducing weight of components
and raising load-bearing capacity.
2 No time-consuming fitting of spigots and double storage, thanks to a single standard with integrated spigot for supported and suspended scaffolding.
2 The integrated scaffolding system for easy and complicated applications is fully combinable with all former generations. Maximum investment protection thanks to
long durability, purchase availability for decades and continuous enhancements.
2 Improved working safety and time saving on assembly thanks to the AutoLock function.
2 Improved working thanks to the lower weight of components and more headroom by approx. 10 cm.
7
THE INTEGRATED SCAFFOLDING SYSTEM: APPLICATION-ORIENTED ACCESSORIESProtective Roofs
Layher weather protection roofs can be used in a number of variants depending on
their span, the snow load or the wind load. That saves you real money when plan-
ning temporary weather protection roofs. For easy use on the site, clearly set-out
material and loading capacity tables for snow and wind loads are available for you.
Protective roofs are not a one-off solution for Layher, but a standard product – this
ensures readiness for immediate delivery.
Protect System
With its Protect System, Layher offers an enclosure system that fits in with
Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protec-
tion in combination with the Allround bridging system and also for environ mental
protection and noise reduction. Highly economical to use thanks to quick and easy
assembly in a simple and logical assembly sequence, and the frequent use of a few
system components. The Layher Protect System is not a one-off solution for Layher,
but a standard product – this ensures readiness for immediate delivery.
As the wedge-head is pushed over
the rosette, the wedge drops automa-
tically into the recess and is immedi-
ately secured against any possibili-
ty of shifting or dropping out.
This means: safe 1-man assembly,
whatever the height.
It’s this easy: Turning the ledger
and slightly tilting it before assembly
activates the AutoLock function.
A hammer blow on the wedge trans-
forms the positive connection into a
superbly strong non-positive one.
As work scaffolding and safety scaffolding at the façade, as birdcage, trestle and suspended scaffolding, or as a rolling tower – the right scaffolding
at all times and for every job and requirement. For very difficult ground plans and anchoring conditions, for very irregular structures, and for jobs with
increased safety requirements.
General building authority approval: Z-8.22-64, Allround Scaffolding Steel, with connector approval and standard version ad work and protection scaffolding at the
façade. The following further approvals have also been granted: Z-8.22-939, Allround Scaffolding Lightweight components and their combination with one another in
Z-8.22-949 and Z-8.22-64.1 Allround Scaffolding Aluminium.
The flat rosette without recesses or
bulges prevents it getting clogged
with the dirt, whatever the type, that
makes assembly difficult.
ANTI-THEFT PROTECTION AND ADVERTISING IN ONELayher Individual
Steel decks can be stamped individually. Wooden toe boards can be printed
according to your preferences.
8
Scaffolding base plates
Scaffolding base plates Pos. Description Dimensions L/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 2 3 4 5 6 7 1 Base plate 20 (max. spindle travel 10 cm ≈ 4") 0.20 m 0´-8" 2.3 kg 5.06 lbs 200 5602.0202 Base plate 40 (max. spindle travel 25 cm ≈ 10") 0.40 m 1´-4" 2.9 kg 6.38 lbs 200 4001.0403 Base plate 60 (max. spindle travel 41 cm ≈ 1´-4") 0.60 m 2´-0" 3.6 kg 7.92 lbs 200 4001.0604 Base plate 80, reinforced (max. spindle travel 55 cm ≈ 1´-10¨) 0.80 m 2´-7" 4.9 kg 10.78 lbs 200 4002.0805 Swivelling base plate 60, reinforced (max. spindle travel 32 cm ≈ 1´-1"),
ensure sufficient structural strength0.60 m 2´-0" 5.5 kg 12.10 lbs 250 4003.000
6 Base plate 60, solid, without lock(max. spindle travel 41 cm ≈ 1´-4")
0.60 m 2´-0" 6.7 kg 14.74 lbs 200 5602.060
7 Spindle attachment with wedge-head 0.60 m 2´-0" 2.0 kg 4.40 lbs 150 2602.100
8 9 10 8 Head jack 45, solid, 16 cm ≈ 6"(max. spindle travel 26 cm ≈ 10"), width of fork 16 cm ≈ 6"
0.45 m 1´-6" 6.6 kg 14.52 lbs 50 5314.045
9 Head jack 60, reinforced, 18 cm ≈ 7"(max. spindle travel 41 cm ≈ 1´-4"), width of fork 18 cm ≈ 7"
0.60 m 2´-0" 8.0 kg 17.6 lbs 100 5316.060
10 Rosette with thread, clampable 19 WS 0.12 m 0´-5" 1.7 kg 3.74 lbs 100 2602.11922 WS 0.12 m 0´-5" 1.7 kg 3.74 lbs 100 2602.122
11 Swivelling head jack 45, solid(max. spindle travel 26 cm ≈ 10"), width of fork 16 cm ≈ 6"
0.45 m 1´-6" 7.3 kg 16.06 lbs 50 5312.045
12 Cross head jack 45, solid(max. spindle travel 26 cm ≈ 10"), opening dimensions 8.5/17 cm ≈ 3"/7"
0.45 m 1´-6" 6.9 kg 15.18 lbs 50 5315.045
13 Wedge spindle swivel coupler 1.8 kg 3.96 lbs 25 4735.000
14 Adjustment plate for base plateof glass-fibre-reinforced polyamide plastic, inclination 0 – 16 %
6 0.30 m 6 1´-0" 1.3 kg 2.86 lbs 250 4000.400
11
12
13 14
26 cm
41 cm
To adjust to the ground, choose between different height-adjustable Base plates 1-6 with sturdy and self-cleaning round threads, with colour and notch markings to provide protection against overwinding. Make sure that there are sufficient load-distributing surfaces. For all inclined erection surfaces, e.g. in combustion chambers or ship hulls, Swivelling base plates 60, reinforced 5 are used.
The round threads of all Layher scaffolding spindles have an outside diameter of 38 mm and a pitch of 8.1 mm. The wing external dimension of the spindle nut is 205 mm. The dimensions of the foot plate are 150 x 150 mm.
Base plate (normal) =̂ 4.5 mm wall thicknessBase plate (reinforced) =̂ 6.3 mm wall thicknessBase plate/head jack solid =̂ solid material
The Spindle fixture with wedge-head 7 serves to secure the base plate and the base collar against falling out when moving scaffolding with a crane.
The Head jack 8/9 and 11/12 accommodates wood sections or steel beams and serves to adjust height and introduce loads. The solid head jacks and base plates can be recognized by the hexagonal opening provided in them.
The Swivelling top spindle 11 can be used to install supports (e.g. wood sections) with an inclination of up to max. 5 % to the horizontal in the longitudinal and transversal directions, thus eliminating the need to level with a wedge. Greater loads can be supported thanks to the articulated mounting of the top plate and the resulting centric introduction of vertical forces into the spindles.
The Cross head jack 45, solid 12 serves to accommodate wood sections, glued binders or steel beams in falsework and supporting scaffolding. It stabilizes the supports against tilting, and it is possible to use one or two formwork supports. Height adjustment is performed using the spindle nut. The cross head jack is suitable for all common formwork supports.
Wedge spindle swivel coupler 13For connection of a tube dia. 48.3 mm to a scaffolding spindle at any angle.
41 cm
55 cm
32 cm 41 cm
max. 5 % max. 5 %
26 cm
26 cm
10 cm25 cm
9
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Scaffolding base plates Pos. Description Dimensions L/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 2 3 4 5 6 7 1 Base plate 20 (max. spindle travel 10 cm ≈ 4") 0.20 m 0´-8" 2.3 kg 5.06 lbs 200 5602.0202 Base plate 40 (max. spindle travel 25 cm ≈ 10") 0.40 m 1´-4" 2.9 kg 6.38 lbs 200 4001.0403 Base plate 60 (max. spindle travel 41 cm ≈ 1´-4") 0.60 m 2´-0" 3.6 kg 7.92 lbs 200 4001.0604 Base plate 80, reinforced (max. spindle travel 55 cm ≈ 1´-10¨) 0.80 m 2´-7" 4.9 kg 10.78 lbs 200 4002.0805 Swivelling base plate 60, reinforced (max. spindle travel 32 cm ≈ 1´-1"),
ensure sufficient structural strength0.60 m 2´-0" 5.5 kg 12.10 lbs 250 4003.000
6 Base plate 60, solid, without lock(max. spindle travel 41 cm ≈ 1´-4")
0.60 m 2´-0" 6.7 kg 14.74 lbs 200 5602.060
7 Spindle attachment with wedge-head 0.60 m 2´-0" 2.0 kg 4.40 lbs 150 2602.100
8 9 10 8 Head jack 45, solid, 16 cm ≈ 6"(max. spindle travel 26 cm ≈ 10"), width of fork 16 cm ≈ 6"
0.45 m 1´-6" 6.6 kg 14.52 lbs 50 5314.045
9 Head jack 60, reinforced, 18 cm ≈ 7"(max. spindle travel 41 cm ≈ 1´-4"), width of fork 18 cm ≈ 7"
0.60 m 2´-0" 8.0 kg 17.6 lbs 100 5316.060
10 Rosette with thread, clampable 19 WS 0.12 m 0´-5" 1.7 kg 3.74 lbs 100 2602.11922 WS 0.12 m 0´-5" 1.7 kg 3.74 lbs 100 2602.122
11 Swivelling head jack 45, solid(max. spindle travel 26 cm ≈ 10"), width of fork 16 cm ≈ 6"
0.45 m 1´-6" 7.3 kg 16.06 lbs 50 5312.045
12 Cross head jack 45, solid(max. spindle travel 26 cm ≈ 10"), opening dimensions 8.5/17 cm ≈ 3"/7"
0.45 m 1´-6" 6.9 kg 15.18 lbs 50 5315.045
13 Wedge spindle swivel coupler 1.8 kg 3.96 lbs 25 4735.000
14 Adjustment plate for base plateof glass-fibre-reinforced polyamide plastic, inclination 0 – 16 %
6 0.30 m 6 1´-0" 1.3 kg 2.86 lbs 250 4000.400
11
12
13 14
The Rosette with thread, clampable 10 can be attached to the thread of the Layher base plate or head jack. This rosette can be used, when the spindle nut is undone, for bracing in the longitudinal, transverse and diagonal directions. Up to six connections are possible.
The spindle fixture with wedge-head 7 serves to secure the base plate and the base collar against falling out when moving scaffolding with a crane.
10
Vertical support elements of steel and aluminium
1c / e / i
Vertical support elements of steel and aluminium Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1a / h 1a Standard, steel,
with pressed-in spigot0.50 m 1' - 7" 3.2 kg 7.04 lbs 240 5603.0501.00 m 3' - 3" 5.5 kg 12.10 lbs 28 2603.1001.50 m 4' - 11" 7.8 kg 17.16 lbs 28 2603.1502.00 m 6' - 6" 10.1 kg 22.22 lbs 28 2603.2002.50 m 8' - 2" 12.4 kg 27.28 lbs 28 2603.2503.00 m 9' - 9" 14.6 kg 32.12 lbs 28 2603.3004.00 m 13' - 0" 19.2 kg 42.24 lbs 28 2603.400
1b Initial standard LW, steel,with pressed-in spigot for use in the lowest scaffolding level without base collar or for assembly of the modular stairtower, with 5 rosettes
2.21 m 7' - 3" 10.0 kg 22.00 lbs 28 2617.221
1c Standard, steel, without spigote.g. for receiving head jacks, or for suspended scaffolding use the spigot Ref. No. 2605.000
0.50 m 1' - 7" 2.5 kg 5.50 lbs 300 2604.0501.00 m 3' - 3" 4.6 kg 10.12 lbs 28 2604.1001.50 m 4' - 11" 6.8 kg 14.96 lbs 28 2604.1502.00 m 6' - 6" 9.0 kg 19.80 lbs 28 2604.2002.50 m 8' - 2" 11.7 kg 25.74 lbs 28 2604.2503.00 m 9' - 9" 13.7 kg 30.14 lbs 28 2604.300
1d Standard LW, steel, with integrated spigot with cross hole for use in stand and suspended scaffolding
0.50 m 1' - 7" 2.7 kg 5.94 lbs 240 2617.0501.00 m 3' - 3" 4.9 kg 10.78 lbs 28 2617.1001.50 m 4' - 11" 7.1 kg 15.62 lbs 28 2617.1502.00 m 6' - 6" 9.3 kg 20.46 lbs 28 2617.2002.50 m 8' - 2" 11.5 kg 25.30 lbs 28 2617.2503.00 m 9' - 9" 13.7 kg 30.14 lbs 28 2617.3004.00 m 13' - 0" 18.1 kg 39.82 lbs 28 2617.400
1e Standard LW, steelwithout spigotfor scaffolding layer
1.50 m 4' - 11" 6.6 kg 14.52 lbs 28 2619.1502.00 m 6' - 6" 8.8 kg 19.36 lbs 28 2619.200
1f Standard, 0.67 m, with 2 rosettes, without spigotwith integrated base collar
0.67 m 2' - 2" 3.6 kg 7.92 lbs 200 2604.066
1g Standard, 1.17 m, with 3 rosettes, without spigotwith integrated base collar
1.17 m 3' - 10" 6.1 kg 13.42 lbs 28 2604.116
1h Standard, aluminium, with pressed-in spigot
1.00 m 3' - 3" 2.2 kg 4.84 lbs 28 3200.1001.50 m 4' - 11" 3.2 kg 7.04 lbs 28 3200.1502.00 m 6' - 6" 4.1 kg 9.02 lbs 28 3200.2002.50 m 8' - 2" 5.0 kg 11.00 lbs 28 3200.2503.00 m 9' - 9" 5.9 kg 12.98 lbs 28 3200.300
1i Standard, aluminium, without spigot for suspended scaffolding
1.00 m 3' - 3" 1.9 kg 4.18 lbs 28 3209.1001.50 m 4' - 11" 2.8 kg 6.16 lbs 28 3209.1502.00 m 6' - 6" 3.8 kg 8.36 lbs 28 3209.2002.50 m 8' - 2" 4.7 kg 10.34 lbs 28 3209.2503.00 m 9' - 9" 5.6 kg 12.32 lbs 28 3209.300
2 3 4 2 Spigotfor Ref. No. 2604, steel
0.52 m 1' - 8" 1.6 kg 3.52 lbs 350 2605.000
for Ref. No. 3209, aluminium 0.52 m 1' - 8" 0.8 kg 1.76 lbs 100 3209.000
3 Hinged pin, dia. 12 mmwith pan-head
2.0 kg 4.40 lbs 20 4905.667
5 6 7 8 4 Special bolt M12 x 60, with nut 4.0 kg 8.80 lbs 50 4905.061
5 Rosette, clampable 19 WS 0.12 m 0' - 5" 1.1 kg 2.42 lbs 25 2602.01922 WS 0.12 m 0' - 5" 1.0 kg 2.20 lbs 25 2602.022
6 Standard lock, 0.50 m 0.58 m 1' - 11" 4.0 kg 8.80 lbs 100 2603.0007 Base collar 0.24 m 0' - 10" 1.4 kg 3.08 lbs 500 2602.00098 Base collar, long 0.43 m 1' - 5" 2.2 kg 4.84 lbs 400 2660.0009 Locking pin, red, dia. 11 mm 0.2 kg 0.44 lbs 100 4000.001
pressed-in spigot
1b
1d
1g
1f
new integrated spigot with cross hole
with spigot to be screwed in by others
2 x2 x
Standards are available in hot-dip galvanized steeltubing, dia. 48.30 mm, and aluminium tubing,dia. 48.30 mm, with rosettes at every 50 cm for amaximum of eight connections.Four small openings in the rosette determine right-angled connections, four larger openings permit connections at any angles.
100
Dim
ensi
ons
500
400
LAYHER
L IG H T W EIG HT
100
Dim
ensi
ons
500
400
For use as suspended scaffolding or for moving by crane, only following standards may be used: standards 1c+e without spigot together with spigots 2, standards 1i together with spigots 2 or standards LW 1d with integrated spigot.For connecting of each standard, you can use hinged pins 3 or special bolts M12 x 60 4. The spigots should always be bolted into the standard with te special bolts.
The standard LW with integrated spigot 1d – only one standard for stand or suspended scaffolding structures. Thanks to the transmission of tension load no different standards are necessary.
The Rosette, clampable 5, can be connected to any point on the standard and allows up to six ledgers or diagonal braces to be connected to it. This permits flexible solutions between the rosettes even when connected to SpeedyScaf. Loading table available on request.
The Base collar 7, with rosette and the height-adjustable base plate form the scaffolding base. The vertical standard is placed into the base collar for further construction.
The Base collar, long 8, is required with aluminium Allround standards. For Allround rolling towers it facilitates a correct securing of the castors with locks against falling out.
The Standard lock 0.50 m 6 can be used to bridge standard joints, for example when moving scaffolding using a crane or for suspended scaffolding.
11
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Vertical support elements of steel and aluminium Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1a / h 1a Standard, steel,
with pressed-in spigot0.50 m 1' - 7" 3.2 kg 7.04 lbs 240 5603.0501.00 m 3' - 3" 5.5 kg 12.10 lbs 28 2603.1001.50 m 4' - 11" 7.8 kg 17.16 lbs 28 2603.1502.00 m 6' - 6" 10.1 kg 22.22 lbs 28 2603.2002.50 m 8' - 2" 12.4 kg 27.28 lbs 28 2603.2503.00 m 9' - 9" 14.6 kg 32.12 lbs 28 2603.3004.00 m 13' - 0" 19.2 kg 42.24 lbs 28 2603.400
1b Initial standard LW, steel,with pressed-in spigot for use in the lowest scaffolding level without base collar or for assembly of the modular stairtower, with 5 rosettes
2.21 m 7' - 3" 10.0 kg 22.00 lbs 28 2617.221
1c Standard, steel, without spigote.g. for receiving head jacks, or for suspended scaffolding use the spigot Ref. No. 2605.000
0.50 m 1' - 7" 2.5 kg 5.50 lbs 300 2604.0501.00 m 3' - 3" 4.6 kg 10.12 lbs 28 2604.1001.50 m 4' - 11" 6.8 kg 14.96 lbs 28 2604.1502.00 m 6' - 6" 9.0 kg 19.80 lbs 28 2604.2002.50 m 8' - 2" 11.7 kg 25.74 lbs 28 2604.2503.00 m 9' - 9" 13.7 kg 30.14 lbs 28 2604.300
1d Standard LW, steel, with integrated spigot with cross hole for use in stand and suspended scaffolding
0.50 m 1' - 7" 2.7 kg 5.94 lbs 240 2617.0501.00 m 3' - 3" 4.9 kg 10.78 lbs 28 2617.1001.50 m 4' - 11" 7.1 kg 15.62 lbs 28 2617.1502.00 m 6' - 6" 9.3 kg 20.46 lbs 28 2617.2002.50 m 8' - 2" 11.5 kg 25.30 lbs 28 2617.2503.00 m 9' - 9" 13.7 kg 30.14 lbs 28 2617.3004.00 m 13' - 0" 18.1 kg 39.82 lbs 28 2617.400
1e Standard LW, steelwithout spigotfor scaffolding layer
1.50 m 4' - 11" 6.6 kg 14.52 lbs 28 2619.1502.00 m 6' - 6" 8.8 kg 19.36 lbs 28 2619.200
1f Standard, 0.67 m, with 2 rosettes, without spigotwith integrated base collar
0.67 m 2' - 2" 3.6 kg 7.92 lbs 200 2604.066
1g Standard, 1.17 m, with 3 rosettes, without spigotwith integrated base collar
1.17 m 3' - 10" 6.1 kg 13.42 lbs 28 2604.116
1h Standard, aluminium, with pressed-in spigot
1.00 m 3' - 3" 2.2 kg 4.84 lbs 28 3200.1001.50 m 4' - 11" 3.2 kg 7.04 lbs 28 3200.1502.00 m 6' - 6" 4.1 kg 9.02 lbs 28 3200.2002.50 m 8' - 2" 5.0 kg 11.00 lbs 28 3200.2503.00 m 9' - 9" 5.9 kg 12.98 lbs 28 3200.300
1i Standard, aluminium, without spigot for suspended scaffolding
1.00 m 3' - 3" 1.9 kg 4.18 lbs 28 3209.1001.50 m 4' - 11" 2.8 kg 6.16 lbs 28 3209.1502.00 m 6' - 6" 3.8 kg 8.36 lbs 28 3209.2002.50 m 8' - 2" 4.7 kg 10.34 lbs 28 3209.2503.00 m 9' - 9" 5.6 kg 12.32 lbs 28 3209.300
2 3 4 2 Spigotfor Ref. No. 2604, steel
0.52 m 1' - 8" 1.6 kg 3.52 lbs 350 2605.000
for Ref. No. 3209, aluminium 0.52 m 1' - 8" 0.8 kg 1.76 lbs 100 3209.000
3 Hinged pin, dia. 12 mmwith pan-head
2.0 kg 4.40 lbs 20 4905.667
5 6 7 8 4 Special bolt M12 x 60, with nut 4.0 kg 8.80 lbs 50 4905.061
5 Rosette, clampable 19 WS 0.12 m 0' - 5" 1.1 kg 2.42 lbs 25 2602.01922 WS 0.12 m 0' - 5" 1.0 kg 2.20 lbs 25 2602.022
6 Standard lock, 0.50 m 0.58 m 1' - 11" 4.0 kg 8.80 lbs 100 2603.0007 Base collar 0.24 m 0' - 10" 1.4 kg 3.08 lbs 500 2602.00098 Base collar, long 0.43 m 1' - 5" 2.2 kg 4.84 lbs 400 2660.0009 Locking pin, red, dia. 11 mm 0.2 kg 0.44 lbs 100 4000.001
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
12
Horizontal support elements, side protection
Horizontal support elements, side protection Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 Allround O-ledger LW,
with AutoLock function
The 0.39 m - 1' - 3" ledger is used on the 0.39 m - 1' - 3" bracket for fall protection at the end. The ledger 0.86 m 2' - 10" is used for podia and stands. It fits to the Event deck width EV 86. The ledger 0.90 m - 2' -11" is used for construction of the equalising modular stairway.The 1.04 m - 3' - 5" ledger corresponds to half the 2.07 m - 6' - 9" bay. The 1.29 m - 4' - 3" ledger corresponds to half the 2.57 m - 8' - 5" bay.
0.39 m 1' - 3" 1.9 kg 4.18 lbs 250 2601.0390.45 m 1' - 6" 2.1 kg 4.62 lbs 250 2601.0450.65 m 2' - 2" 2.7 kg 5.94 lbs 50 2601.0650.73 m 2' - 5" 2.9 kg 6.38 lbs 400 2601.0730.86 m 2' - 10" 3.3 kg 7.26 lbs 50 2601.0860.90 m 2' -11" 3.4 kg 7.48 lbs 50 2601.0901.04 m 3' - 5" 3.8 kg 8.36 lbs 50 2601.1031.06 m 3' - 6" 3.9 kg 8.58 lbs 50 2601.1061.09 m 3' - 7" 4.0 kg 8.8 lbs 50 2601.1091.15 m 3' - 10" 4.3 kg 9.46 lbs 50 2601.1151.29 m 4' - 3" 4.6 kg 10.12 lbs 50 2601.1291.40 m 4' - 7" 5.0 kg 11.00 lbs 50 2601.1401.57 m 5' - 2" 5.5 kg 12.10 lbs 50 2601.1572.07 m 6' - 9" 7.0 kg 15.40 lbs 50 2601.2072.13 m 7' - 0" 7.4 kg 16.28 lbs 50 2601.2132.57 m 8' - 5" 8.5 kg 18.70 lbs 50 2601.2573.05 m 10' - 0" 10.0 kg 22.00 lbs 50 2601.3053.07 m 10' - 1" 10.1 kg 22.22 lbs 50 2601.307
O-ledger, aluminium 0.73 m 2' - 5" 2.8 kg 6.16 lbs 200 3201.0731 / 2 1.09 m 3' - 6" 3.5 kg 7.70 lbs 50 3201.109
1.40 m 4' - 7" 3.7 kg 8.14 lbs 50 3201.1401.57 m 5' - 2" 4.0 kg 8.80 lbs 50 3201.1572.07 m 6' - 9" 4.5 kg 9.90 lbs 50 3201.2072.57 m 8' - 5" 4.9 kg 10.78 lbs 50 3201.2573.07 m 10' - 1" 5.5 kg 12.10 lbs 50 3201.307
2 Allround O-ledger LW, steel, metricwith AutoLock function
0.25 m 0' - 10" 1.4 kg 3.08 lbs 300 2601.0250.50 m 1' - 7" 2.2 kg 4.84 lbs 250 2601.0501.00 m 3' - 3" 3.7 kg 8.14 lbs 50 2601.1001.50 m 4' - 11" 5.3 kg 11.66 lbs 50 2601.1502.00 m 6' - 6" 6.8 kg 14.96 lbs 50 2601.2002.50 m 8' - 2" 8.3 kg 18.26 lbs 50 2601.2503.00 m 9' - 9" 9.9 kg 21.78 lbs 50 2601.300
3 3 Scaffolding tube, steel, hot-dip galvanizedScaffolding tubes dia. 48.3 x 4.0 mm, as per OSHA part 1926.451 subpart L
0.50 m 1' - 7" 2.3 kg 5.06 lbs 61 4600.050
1.00 m 3' - 3" 4.5 kg 9.90 lbs 61 4600.100
1.50 m 4' - 11" 6.8 kg 14.96 lbs 61 4600.150
2.00 m 6' - 6" 9.0 kg 19.80 lbs 61 4600.200
2.50 m 8' - 2" 11.3 kg 24.86 lbs 61 4600.250
3.00 m 9' - 9" 13.5 kg 29.70 lbs 61 4600.300
3.50 m 11' - 6" 15.8 kg 34.76 lbs 61 4600.350
4.00 m 13' - 0" 16.7 kg 36.74 lbs 61 4600.400
5.00 m 16' - 5" 22.7 kg 49.94 lbs 61 4600.500
6.00 m 19' - 8" 25.2 kg 55.44 lbs 61 4600.600
Depending on the scaffolding bay length, deck type and load, Ledgers made of steel or aluminium are available in cylindrical tube, U-section and reinforcement sections for higher loads. The ledgers are deck beams, bracing elements and guardrails.
The wedge lock connection ensures positive and non-positive connection with central load introduction between standards and ledgers. Safety is already assured in the assembly state because the wedge lock already prevents unintentional disengagement when the wedge is loosely inserted. Longitudinal ledgers can be omitted at deck level if the decks are secured against lifting off by a lift-off preventer.
Allround O-ledger LW 1/2The new wedge-head design with AutoLock function means greater construction safety. By turning the ledger the function gets activated and the wedge descends into rosette slot automatically. Thanks to the reduction of the wall thickness there is a weight saving of 12 %. That leads to less strenous working conditions.
Slide the wedge-head over the rosette.
Insert the wedge into a hole. The component is secure against shifting and falling out.
Hammer down the wedge to provide a non-positive connection (use 500 g metal hammer until the blow bounces off).
LAYHER
L IG H T W EIG HT
Dimensions between centre lines
13
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Horizontal support elements, side protection Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 Allround O-ledger LW,
with AutoLock function
The 0.39 m - 1' - 3" ledger is used on the 0.39 m - 1' - 3" bracket for fall protection at the end. The ledger 0.86 m 2' - 10" is used for podia and stands. It fits to the Event deck width EV 86. The ledger 0.90 m - 2' -11" is used for construction of the equalising modular stairway.The 1.04 m - 3' - 5" ledger corresponds to half the 2.07 m - 6' - 9" bay. The 1.29 m - 4' - 3" ledger corresponds to half the 2.57 m - 8' - 5" bay.
0.39 m 1' - 3" 1.9 kg 4.18 lbs 250 2601.0390.45 m 1' - 6" 2.1 kg 4.62 lbs 250 2601.0450.65 m 2' - 2" 2.7 kg 5.94 lbs 50 2601.0650.73 m 2' - 5" 2.9 kg 6.38 lbs 400 2601.0730.86 m 2' - 10" 3.3 kg 7.26 lbs 50 2601.0860.90 m 2' -11" 3.4 kg 7.48 lbs 50 2601.0901.04 m 3' - 5" 3.8 kg 8.36 lbs 50 2601.1031.06 m 3' - 6" 3.9 kg 8.58 lbs 50 2601.1061.09 m 3' - 7" 4.0 kg 8.8 lbs 50 2601.1091.15 m 3' - 10" 4.3 kg 9.46 lbs 50 2601.1151.29 m 4' - 3" 4.6 kg 10.12 lbs 50 2601.1291.40 m 4' - 7" 5.0 kg 11.00 lbs 50 2601.1401.57 m 5' - 2" 5.5 kg 12.10 lbs 50 2601.1572.07 m 6' - 9" 7.0 kg 15.40 lbs 50 2601.2072.13 m 7' - 0" 7.4 kg 16.28 lbs 50 2601.2132.57 m 8' - 5" 8.5 kg 18.70 lbs 50 2601.2573.05 m 10' - 0" 10.0 kg 22.00 lbs 50 2601.3053.07 m 10' - 1" 10.1 kg 22.22 lbs 50 2601.307
O-ledger, aluminium 0.73 m 2' - 5" 2.8 kg 6.16 lbs 200 3201.0731 / 2 1.09 m 3' - 6" 3.5 kg 7.70 lbs 50 3201.109
1.40 m 4' - 7" 3.7 kg 8.14 lbs 50 3201.1401.57 m 5' - 2" 4.0 kg 8.80 lbs 50 3201.1572.07 m 6' - 9" 4.5 kg 9.90 lbs 50 3201.2072.57 m 8' - 5" 4.9 kg 10.78 lbs 50 3201.2573.07 m 10' - 1" 5.5 kg 12.10 lbs 50 3201.307
2 Allround O-ledger LW, steel, metricwith AutoLock function
0.25 m 0' - 10" 1.4 kg 3.08 lbs 300 2601.0250.50 m 1' - 7" 2.2 kg 4.84 lbs 250 2601.0501.00 m 3' - 3" 3.7 kg 8.14 lbs 50 2601.1001.50 m 4' - 11" 5.3 kg 11.66 lbs 50 2601.1502.00 m 6' - 6" 6.8 kg 14.96 lbs 50 2601.2002.50 m 8' - 2" 8.3 kg 18.26 lbs 50 2601.2503.00 m 9' - 9" 9.9 kg 21.78 lbs 50 2601.300
3 3 Scaffolding tube, steel, hot-dip galvanizedScaffolding tubes dia. 48.3 x 4.0 mm, as per OSHA part 1926.451 subpart L
0.50 m 1' - 7" 2.3 kg 5.06 lbs 61 4600.050
1.00 m 3' - 3" 4.5 kg 9.90 lbs 61 4600.100
1.50 m 4' - 11" 6.8 kg 14.96 lbs 61 4600.150
2.00 m 6' - 6" 9.0 kg 19.80 lbs 61 4600.200
2.50 m 8' - 2" 11.3 kg 24.86 lbs 61 4600.250
3.00 m 9' - 9" 13.5 kg 29.70 lbs 61 4600.300
3.50 m 11' - 6" 15.8 kg 34.76 lbs 61 4600.350
4.00 m 13' - 0" 16.7 kg 36.74 lbs 61 4600.400
5.00 m 16' - 5" 22.7 kg 49.94 lbs 61 4600.500
6.00 m 19' - 8" 25.2 kg 55.44 lbs 61 4600.600
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
14
Horizontal support elements, side protection
Horizontal support elements. side protection Lattice Beams
1
1
2 3a/b 4
2
3
4
5
PU[pcs
Openings, accesses and even conversions are easily constructed with O-ledgers 2-3 with lateral receiving elements
O-ledger deck configuration
Bay width | Deck width 0.19 m / 0' - 7" 0.32 m / 1' - 0" 0.61 m / 2' - 0"
Version A B A B A B
0.65 m 1 – 1 – – –
0.73 m – – 2 – – 1
1.06 m 2 2 2 – – 1
1.09 m 3 – 1 – – –
1.15 m 2 2 2 – – 1
1.29 m 1 1 3 1 – 1
1.57 m 1 1 4 2 – 1
2.07 m – – 6 4 – 1
2.13 m 2 2 5 3 – 1
2.57 m 1 1 7 5 – 1
3.05 m – – 9 7 – 1
3.07 m – – 9 7 – 1
Example: A 1.09 m wide bay can be covered with 3x 0.32 m decks (Variant A) or 1x 0.61 m + 1x 0.32 m decks (Variant B).
1
2
Pos. Description DimensionsL/H x W
Weight approx. PU [pcs.]
Ref. No.
SI Imperial SI Imperial
1 O-bridging ledger, steelNot light weight
1.57 m 5' - 2" 9.7 kg 21.34 lbs 50 2625.157
2.07 m 6' - 9" 12.6 kg 27.72 lbs 50 2625.207
2.13 m 7' - 0" 12.9 kg 28.38 lbs 50 2625.213
2 O-ledger steel deck – steel deck, for connection on both sides to the steel deck flank, with securing flaps, up to steel decks of 3.07 m - 10' - 1"
0.32 m 1' - 0" 3.1 kg 6.82 lbs 100 2614.0690.64 m 2' - 1" 4.2 kg 9.24 lbs 50 2614.0700.96 m 3' - 1" 5.2 kg 11.44 lbs 50 2614.071
3 O-ledger steel deck – O-ledger, one side for connection to the steel deck flank, with securing flap, the other side for connection to an O-ledger, with securing wedge
0.32 m 1' - 0" 2.4 kg 5.28 lbs 100 2614.032
0.64 m 2' - 1" 4.4 kg 9.68 lbs 50 2614.064
0.96 m 3' - 1" 5.5 kg 12.10 lbs 50 2614.096
4 Guardrail, adjustablefor use in compensation bays
1.57 m – 2.57 m 5' - 2" - 8' - 5" 8.5 kg 18.70 lbs 50 2606.0001.09 m – 1.57 m 3' - 6" - 5' - 2" 5.7 kg 12.54 lbs 50 2606.001
5 O-bridging ledger, steel 2.57 m 8' - 5" 14.3 kg 31.46 lbs 50 2672.2573.05 m 10' - 0" 16.9 kg 37.18 lbs 50 2672.3053.07 m 10' - 1" 17.0kg 37.4 lbs 50 2672.307
LAYHER
L IG H T W EIG HT
15
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Horizontal support elements. side protection Lattice Beams
1
1
2 3a/b 4
2
3
4
5
PU[pcs
Lattice Beams
400
130
O-lattice beam, with 4 wedge-heads 1, steel, is used for further construction in the scaffolding standard dimension. The top and bottom cylindrical tube chords are secured to the standard with the wedge-heads.
Applicable to lattice beams: when lattice beams are used, the stability of the scaffolding must be verified in each case. Loading tables available on request. The scaffolding deck must be secured against lifting off in each case with deck lift-off preventer.
The Lattice beam connection 0.50 m, with 2 wedge-heads 7 permits a connection between non-system aluminium or steel O-lattice beams 450 and Allround standards.
O-lattice beam deck configuration
1.57 m 4 x 0.32 and 1 x 0.19 m
2.07 m 6 x 0.32 m
2.57 m 7 x 0.32 m and 1 x 0.19 m
3.07 m 9 x 0.32 m
4.14 m 12 x 0.32 and 1 x 0.19 m
4.27 m 12 x 0.32 and 1 x 0.19 m
5.14 m 12 x 0.32 and 1 x 0.19 m
6.14 m 12 x 0.32 and 1 x 0.19 m
7.71 m 23 x 0.32 and 1 x 0.19 m
8.53 m 26 x 0.32 m
Measurement
500
Pos. Description DimensionsL/H x W
Weight approx. PU [pcs.]
Ref. No.
SI Imperial SI Imperial
1 O-lattice beam LW, with 4 wedge with 4 wedge-heads, steel
2.07 x 0.50 m 6' - 9" x 1' - 7" 22.2 kg 48.84 lbs 40 2674.207
2.57 x 0.50 m 8' - 5" x 1' - 7" 25.5 kg 56.10 lbs 40 2674.257
3.07 x 0.50 m 10' - 1" x 1 ' -7" 30.9 kg 67.98 lbs 40 2674.307
4.14 x 0.50 m 13' - 7" x 1' - 7" 40.2 kg 88.44 lbs 40 2674.414
4.27 x 0.50 m 14' - 0" x 1' - 7" 46 kg 101.2 lbs 40 2674.427
5.14 x 0.50 m 16' - 10" x 1' - 7" 51.2 kg 112.64 lbs 40 2674.514
6.14 x 0.50 m 20' - 2" x 1' - 7" 59.2 kg 130.24 lbs 40 2674.614
6.39 x 0.50 m 21' - 0" x 1' - 7" 69 kg 151.8 lbs 40 UR
7.71 x 0.50 m 25' - 4" x 1' - 7" 71.0 kg 156.2 lbs 40 2674.771
8.35 x 0.50 m 28' - 0" x 1' - 7" 95 kg 209 lbs 40 UR
2 Lattice beam connection, 0.50 m,with 2 wedge-heads for system-free lattice beams
0.58 m 1' - 11" 8.3 kg 18.26 lbs 100 4920.050
3a Spigot for U-lattice beamincl. 2 bolts, also for bridging and reinfroced ledgers
2.1 kg 4.62 lbs 2656.001
3b Spigot for U-lattice beam reinforcedfor lattice beam incl. 2 bolts
2.1 kg 4.62 lbs 2656.002
4 Spigot for O-lattice beam,with half-coupler for lattice beam and ledger
22 WS 1.8 kg 3.96 lbs 250 4706.022
16
Diagonal bracing
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 O-ledger, horizontal-diagonal, steelfor 1.09 m bay length, 1.09 m bay widthfor 1.29 m bay length, 1.29 m bay widthfor 1.57 m bay length, 1.09 m bay widthfor 1.57 m bay length, 1.57 m bay widthfor 2.00 m bay length, 2.00 m bay widthfor 2.07 m bay length, 0.73 m bay widthfor 2.07 m bay length, 1.09 m bay widthfor 2.07 m bay length, 2.07 m bay widthfor 2.07 m bay length, 2.13 m bay widthfor 2.13 m bay length, 2.13 m bay widthfor 2.57 m bay length, 0.73 m bay widthfor 2.57 m bay length, 1.09 m bay widthfor 2.57 m bay length, 1.57 m bay widthfor 2.57 m bay length, 2.07 m bay widthfor 2.57 m bay length, 2.57 m bay widthfor 3.07 m bay length, 0.73 m bay widthfor 3.07 m bay length, 1.09 m bay widthfor 3.07 m bay length, 3.07 m bay width
1.54 m 5' - 1" 6,2 kg 13.64 lbs 50 2608.1081.82 m 6' - 0" 6.6 kg 14.52 lbs 50 0702.4521.94 m 6' - 4" 6,9 kg 15.18 lbs 50 2608.1592.22 m 7' - 3" 8,7 kg 19.14 lbs 50 2608.1572.83 m 9' - 3" 11,3 kg 24.86 lbs 50 2608.2002.19 m 7' - 2" 9,0 kg 19.80 lbs 50 2608.2082.34 m 7' - 8" 9,3 kg 20.46 lbs 50 2608.2092.93 m 9' - 7" 11,5 kg 25.30 lbs 50 2608.2072.98 m 9' - 9" 11.7 kg 25.74 lbs 50 0731.8963.00 m 9' - 10" 11.9 kg 26.18 lbs 50 0731.8982.67 m 8' - 9" 10,8 kg 23.76 lbs 50 2608.2582.79 m 9' - 2" 9,7 kg 21.34 lbs 50 2608.2593.01 m 9' - 10" 11,7 kg 25.74 lbs 50 2608.2563.30 m 10' - 10" 12,8 kg 28.16 lbs 50 2608.2553.64 m 11' - 11" 14,0 kg 30.80 lbs 50 2608.2573.16 m 10' - 4" 12,3 kg 27.06 lbs 50 2608.3083.26 m 10' - 8" 11,0 kg 24.20 lbs 50 2608.309
4.34 m 14' - 3" 15,8 kg 34.76 lbs 50 2608.307
The bay length is dis-played in numbers and by a defined colour code.
Number of rosettes tell you which standard is used resp. the bay height.
2
2
Diagonal bracing
2
1
For rectangular floor plan, with offset welded wedge-heads.
For square floor plan,with straight welded wedge-heads.
Tube length
Diagonal brace
Bay
wid
th
Bay length
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
Bay length
O-ledger, horizontal-diagonal
The O-ledger, horizontal-diagonal 1, with wedge-heads serves to brace horizontal levels in scaffolding without standard decks or in scaffolding with board decking.The diagonal braces 2 with wedge locks further brace the basic system consisting of standards and ledgers, and thanks to their high connection values also facilitate special structures.
Bay
wid
th
17
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial2 Diagonal brace, steel
2.00
m
bay
heig
ht
0.73 m bay length 2.12 m 7' - 11" 7.3 kg 16.09 lbs 50 2683.0731.04 m bay length 2.23 m 7' - 4" 7.6 kg 16.76 lbs 50 2683.1041.09 m bay length 2.25 m 7' - 4" 7.6 kg 16.76 lbs 50 2683.1091.29 m bay length 2.35 m 8' - 8" 7.8 kg 17.20 lbs 50 2683.1291.40 m bay length 2.40 m 8' - 11" 7.9 kg 17.42 lbs 50 2683.1401.57 m bay length 2.49 m 8' - 2" 8.0 kg 17.64 lbs 50 2683.1572.07 m bay length 2.81 m 9' - 3" 8.9 kg 19.62 lbs 50 2683.2072.57 m bay length 3.18 m 10' - 5" 9.5 kg 20.90 lbs 50 2683.2573.07 m bay length 3.58 m 12' - 9" 10.5 kg 23.10 lbs 50 2683.3074.14 m bay length 4.51 m 14' -10" 14.0 kg 30.80 lbs 50 2683.4140.73 m bay length
1.50
m
bay
heig
ht
1.65 m 5' - 5" 5.4 kg 11.88 lbs 50 2682.0731.04 m bay length 1.79 m 6' -11" 6.5 kg 14.30 lbs 50 2682.1041.09 m bay length 1.81 m 6' - 11" 5.8 kg 12.76 lbs 50 2682.1091.29 m bay length 1.93 m 6' - 4" 6.7 kg 14.77 lbs 50 0712.3811.40 m bay length 1.99 m 7' - 6" 6.8 kg 14.99 lbs 50 2682.1401.57 m bay length 2.11 m 7' - 11" 7.3 kg 16.06 lbs 50 2682.1572.07 m bay length 2.48 m 8' - 2" 8.2 kg 18.08 lbs 50 2682.2072.57 m bay length 2.89 m 9' - 6" 9.5 kg 20.90 lbs 50 2682.2573.07 m bay length 3.32 m 11' - 11" 10.5 kg 23.15 lbs 50 2682.3070.73 m bay length
1.00
m
bay
heig
ht
1.20 m 4 - 11" 4.2 kg 9.26 lbs 50 2681.0731.04 m bay length 1.39 m 5' - 7" 4.8 kg 10.58 lbs 50 2681.1041.09 m bay length 1.41 m 5' - 7" 4.8 kg 10.58 lbs 50 2681.1091.29 m bay length 1.55 m 5' - 1" 5.6 kg 12.35 lbs 50 0705.3031.40 m bay length 1.64 m 5' - 4" 5.8 kg 12.79 lbs 50 2681.1401.57 m bay length 1.77 m 6' - 10" 6.3 kg 13.86 lbs 50 2681.1572.07 m bay length 2.20 m 7' - 3" 7.4 kg 16.31 lbs 50 2681.2072.57 m bay length 2.66 m 9' - 9" 8.8 kg 19.40 lbs 50 2681.2573.07 m bay length 3.13 m 10' - 3" 9.9 kg 21.83 lbs 50 2681.3071.04 m bay length
0.50
m
bay
heig
ht
1.08 m 4' - 7" 4.3 kg 9.48 lbs 50 2680.1041.09 m bay length 1.10 m 4' - 7" 4.0 kg 8.82 lbs 50 2680.1091.29 m bay length 1.28 m 4' - 2" 4.92 kg 10.85 lbs 50 0712.5811.40 m bay length 1.39 m 5' - 7" 5.1 kg 11.24 lbs 50 2680.1401.57 m bay length 1.55 m 5' - 1" 5.7 kg 12.57 lbs 50 2680.1572.07 m bay length 2.03 m 7' - 8" 7.2 kg 15.87 lbs 50 2680.2072.57 m bay length 2.51 m 8' - 3" 8.4 kg 18.52 lbs 50 2680.2573.07 m bay length 3.00 m 10' -10" 9.6 kg 21.16 lbs 50 2680.307Diagonal brace, aluminium
2.00
m
bay
heig
ht
0.73 m bay length 2.12 m 6' - 11" 3.9 kg 8.58 lbs 50 3204.0731.09 m bay length 2.25 m 7' - 5" 4.1 kg 9.02 lbs 50 3204.1091.40 m bay length 2.40 m 7' - 11" 4.2 kg 9.24 lbs 50 3204.1401.57 m bay length 2.49 m 8' - 2" 4.3 kg 9.46 lbs 50 3204.1572.07 m bay length 2.81 m 9' - 3" 4.7 kg 10.34 lbs 50 3204.2072.57 m bay length 3.18 m 10' - 5" 4.9 kg 10.78 lbs 50 3204.2573.07 m bay length 3.58 m 11' - 9" 5.3 kg 11.66 lbs 50 3204.307Diagonal brace Imperial LW, steel1.15 m bay length
2.00
m
bay
leng
th 2.24 m 7' - 4" 7.7 kg 16.98 lbs 50 2683.1152.13 m bay length 2.85 m 9' - 4" 9.0 kg 19.84 lbs 50 2683.2133.05 m bay length 3.57 m 12' - 8" 10.5 kg 23.15 lbs 50 2683.3051.15 m bay length
1.50
m b
ay
leng
th
1.82 m 6' - 0" 6.5 kg 14.33 lbs 50 U.R.
2.13 m bay length 2.53 m 8' - 3" 8.4 kg 18.52 lbs 50 U.R.3.05 m bay length 3.31 m 11' - 10" 10.5 kg 23.15 lbs 50 U.R.
1.15 m bay length
1.00
m b
ay
leng
th
1.45 m 4' - 9" 5.2 kg 11.46 lbs 50 U.R.2.13 m bay length 2.25 m 7' - 5" 7.5 kg 16.53 lbs 50 U.R.3.05 m bay length 3.11 m 10' - 2" 9.9 kg 21.83 kg 50 U.R.
1.15 m bay length
0.50
m b
ay
leng
th
1.18 m 3' - 10" 4.6 kg 10.14 kg 50 U.R.2.13 m bay length 2.08 m 7' - 10" 7.3 kg 16.09 kg 50 U.R.3.05 m bay length 2.98 m 10' - 9" 9.6 kg 21.16 kg 50 U.R.
LAYHER
L IG H T W EIG HT
18
Scaffolding decks, access decks, O-suspension
Individual stampingThe Layher steel decks can be provided with individuallettering. Conspicuously visible on the side section, theygive the Layher steel deck that certain something.
Similar to the steel decks, also the Stalu, Xtra-N and robust decks can be individualized. The stamping is particularly high-quality. The needle stamping process provides fine and very precise lettering.
Scaffolding decks, access decks, O-suspension Pos. Description Use up to load class DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 O-steel deck T9, 0.32 m widesteel, hot-dip galvanized; with integrated swivelling lift-off and tilt preventer perforated, non-slip working surface
0.73 x 0.32 m 2' - 5" x 12" 7.0 kg 15.40 lbs 30 3862.0731.06 x 0.32 m 3' - 6" x 12" 9.3 kg 20.46 lbs 30 3862.1061.09 x 0.32 m 3' - 7" x 12" 9.4 kg 20.68 lbs 30 3862.1091.15 x 0.32 m 3' - 10" x 12" 9.5 kg 20.90 lbs 30 3862.1151.29 x 0.32 m 4' - 3" x 12" 10.1 kg 22.22 lbs 30 3862.1291.40 x 0.32 m 4' - 7" x 12" 10.8 kg 23.76 lbs 30 3862.1401.57 x 0.32 m 5' - 2" x 12" 12.5 kg 27.50 lbs 30 3862.1572.07 x 0.32 m 6' - 9" x 12" 16.0 kg 35.20 lbs 30 3862.2072.13 x 0.32 m 7' - 0" x 12" 16.0 kg 35.20 lbs 30 3862.2132.57 x 0.32 m 8' - 5" x 12" 18.9 kg 41.58 lbs 30 3862.2573.05 x 0.32 m 10' - 0" x 12" 22.5 kg 49.50 lbs 30 3862.3053.07 x 0.32 m 10' - 1" x 12" 22.5 kg 49.50 lbs 30 3862.307
2 2 Steel tube, dia. 33.7 mm 1.50 m 4' - 11" 3.0 kg 6.60 lbs 100 4603.150
3 3 O-steel deck T9, 0.19 m widesteel, hot-dip galvanized; with integrated swivelling lift-off and tilt preventer perforated, non-slip working surface
0.73 x 0.19 m 2' - 5" x 7" 5.0 kg 11.00 lbs 50 3863.0731.06 x 0.19 m 3' - 6" x 7" 6.9 kg 15.18 lbs 30 3863.1061.09 x 0.19 m 2' - 5" x 7" 7.0 kg 15.40 lbs 50 3863.1091.15 x 0.19 m 3' - 10" x 7" 7.4 kg 16.28 lbs 30 3863.1151.29 x 0.19 m 4' - 3" x 7" 8.2 kg 18.04 lbs 50 0727.6001.40 x 0.19 m 2' - 5" x 7" 9.0 kg 19.80 lbs 50 3863.140
4 1.57 x 0.19 m 2' - 5" x 7" 10.0 kg 22.00 lbs 50 3863.1572.07 x 0.19 m 2' - 5" x 7" 12.7 kg 27.94 lbs 50 3863.2072.13 x 0.19 m 7' - 0" x 7" 10.5 kg 23.1 lbs 30 3863.2132.57 x 0.19 m 2' - 5" x 7" 15.5 kg 34.10 lbs 50 3863.2573.05 x 0.19 m 10' - 0" x 7" 14.5 kg 31.9 lbs 30 3863.3053.07 x 0.19 m 10' - 1" x 7" 18.2 kg 40.04 lbs 50 3863.307
6 4 O-aluminum access deck 0.61 m (24") widewith offset hatch and integrated ladder
2.57 x 0.61 m 8' - 5" x 2' -0" 27.7 kg 60.94 lbs 40 0724.3903.05 x 0.61 m 10' - 0" x 2' - 0" 35.2 kg 77.44 lbs 40 0726.2473.07 x 0.61 m 10' - 1" x 2' - 0" 33.0 kg 72.60 lbs 40 0726.246
5 Access ladder for access deckRef. No. 3871
2.15 x 0.35 m 7.8 kg 70 4008.007
76 O-access deck, T9 aluminium, 0,61 m wide
easy access with aluminium deck surface and aluminium access hatch
1.57 x 0.61 m 5' - 2" x 2'-0" 14.9 kg 32.78 lbs 40 3871.157
2.07 x 0.61 m 6' - 9" x 2'-0" 17.9 kg 39.38 lbs 40 3871.207
2.13 x 0.61 m 7' - 0" x 2' - 0" 18.3 kg 40.26 lbs 40 0729.460
7 O-access deck, aluminium, 0.61 m widewith integrated access ladder
2.57 x 0.61 m 8' - 5" x 2'-0" 26.5 kg 58.3 lbs 40 3874.257E
8
8 O-access deck, aluminium, 0.61 m wide 1.00 x 0.61 m 3' - 3" x 2'-0" 10.0 kg 22 lbs 40 3871.100
O-suspension
5
19
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Scaffolding decks, access decks, O-suspension Pos. Description Use up to load class DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 O-steel deck T9, 0.32 m widesteel, hot-dip galvanized; with integrated swivelling lift-off and tilt preventer perforated, non-slip working surface
0.73 x 0.32 m 2' - 5" x 12" 7.0 kg 15.40 lbs 30 3862.0731.06 x 0.32 m 3' - 6" x 12" 9.3 kg 20.46 lbs 30 3862.1061.09 x 0.32 m 3' - 7" x 12" 9.4 kg 20.68 lbs 30 3862.1091.15 x 0.32 m 3' - 10" x 12" 9.5 kg 20.90 lbs 30 3862.1151.29 x 0.32 m 4' - 3" x 12" 10.1 kg 22.22 lbs 30 3862.1291.40 x 0.32 m 4' - 7" x 12" 10.8 kg 23.76 lbs 30 3862.1401.57 x 0.32 m 5' - 2" x 12" 12.5 kg 27.50 lbs 30 3862.1572.07 x 0.32 m 6' - 9" x 12" 16.0 kg 35.20 lbs 30 3862.2072.13 x 0.32 m 7' - 0" x 12" 16.0 kg 35.20 lbs 30 3862.2132.57 x 0.32 m 8' - 5" x 12" 18.9 kg 41.58 lbs 30 3862.2573.05 x 0.32 m 10' - 0" x 12" 22.5 kg 49.50 lbs 30 3862.3053.07 x 0.32 m 10' - 1" x 12" 22.5 kg 49.50 lbs 30 3862.307
2 2 Steel tube, dia. 33.7 mm 1.50 m 4' - 11" 3.0 kg 6.60 lbs 100 4603.150
3 3 O-steel deck T9, 0.19 m widesteel, hot-dip galvanized; with integrated swivelling lift-off and tilt preventer perforated, non-slip working surface
0.73 x 0.19 m 2' - 5" x 7" 5.0 kg 11.00 lbs 50 3863.0731.06 x 0.19 m 3' - 6" x 7" 6.9 kg 15.18 lbs 30 3863.1061.09 x 0.19 m 2' - 5" x 7" 7.0 kg 15.40 lbs 50 3863.1091.15 x 0.19 m 3' - 10" x 7" 7.4 kg 16.28 lbs 30 3863.1151.29 x 0.19 m 4' - 3" x 7" 8.2 kg 18.04 lbs 50 0727.6001.40 x 0.19 m 2' - 5" x 7" 9.0 kg 19.80 lbs 50 3863.140
4 1.57 x 0.19 m 2' - 5" x 7" 10.0 kg 22.00 lbs 50 3863.1572.07 x 0.19 m 2' - 5" x 7" 12.7 kg 27.94 lbs 50 3863.2072.13 x 0.19 m 7' - 0" x 7" 10.5 kg 23.1 lbs 30 3863.2132.57 x 0.19 m 2' - 5" x 7" 15.5 kg 34.10 lbs 50 3863.2573.05 x 0.19 m 10' - 0" x 7" 14.5 kg 31.9 lbs 30 3863.3053.07 x 0.19 m 10' - 1" x 7" 18.2 kg 40.04 lbs 50 3863.307
6 4 O-aluminum access deck 0.61 m (24") widewith offset hatch and integrated ladder
2.57 x 0.61 m 8' - 5" x 2' -0" 27.7 kg 60.94 lbs 40 0724.3903.05 x 0.61 m 10' - 0" x 2' - 0" 35.2 kg 77.44 lbs 40 0726.2473.07 x 0.61 m 10' - 1" x 2' - 0" 33.0 kg 72.60 lbs 40 0726.246
5 Access ladder for access deckRef. No. 3871
2.15 x 0.35 m 7.8 kg 70 4008.007
76 O-access deck, T9 aluminium, 0,61 m wide
easy access with aluminium deck surface and aluminium access hatch
1.57 x 0.61 m 5' - 2" x 2'-0" 14.9 kg 32.78 lbs 40 3871.157
2.07 x 0.61 m 6' - 9" x 2'-0" 17.9 kg 39.38 lbs 40 3871.207
2.13 x 0.61 m 7' - 0" x 2' - 0" 18.3 kg 40.26 lbs 40 0729.460
7 O-access deck, aluminium, 0.61 m widewith integrated access ladder
2.57 x 0.61 m 8' - 5" x 2'-0" 26.5 kg 58.3 lbs 40 3874.257E
8
8 O-access deck, aluminium, 0.61 m wide 1.00 x 0.61 m 3' - 3" x 2'-0" 10.0 kg 22 lbs 40 3871.100
IND
IND
IND
IND
IND
IND
20
Steel plank, gap decks
iScaffolding planks can be found in the catalogue for System-free Accessories.
Steel plank, Gap decks Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 Steel plank, 0.30 m system-free, completely made of hot-dip galvanized steel
1.00 x 0.30 m 3' - 3" x 11" 6.5 kg 14.30 lbs 60 3880.1001.50 x 0.30 m 4' - 11" x 11" 10.3 kg 22.66 lbs 60 3880.1502.00 x 0.30 m 6' - 6" x 11" 12.8 kg 28.16 lbs 60 3880.2002.50 x 0.30 m 8' - 2" x 11" 15.3 kg 33.66 lbs 60 3880.250
2 2 Steel plank, 0.20 m system-free, completely made of hot-dip galvanized steel
1.00 x 0.20 m 3' - 3" x 8" 4.8 kg 10.56 lbs 100 3878.1001.50 x 0.20 m 4' - 11" x 8" 7.2 kg 15.84 lbs 100 3878.1502.00 x 0.20 m 6' - 6" x 8" 9.5 kg 20.90 lbs 100 3878.2002.50 x 0.20 m 8' - 2" x 8" 11.8 kg 25.96 lbs 100 3878.250
3 3 Locking pin for steel plank, dia. 11 mmnot for multiple use
0.08 m 0' - 3" 0.6 kg 1.32 lbs 100 3800.006
4a / b 4a Securing screw, long (red), steel, galvanizedFor securing of steel planks on steel decks
19 WS 0.08 x 0.03 m 0' - 3" x 1" 4.0 kg 8.80 lbs 50 3800.009
22 WS 0.08 x 0.03 m 0' - 3" x 1" 3.9 kg 8.58 lbs 50 3800.010
4b Securing screw, short (blue), steel, galvanizedFor securing of steel gap covers on steel decks
19 WS 0.04 x 0.02 m 0' - 2" x 1" 23.0 kg 50.6 lbs 50 3800.011
22 WS 0.04 x 0.02 m 0' - 2" x 1" 2.3 kg 5.06 lbs 50 3800.012
5 5 Steel gap cover, 0.32 mUse up to load vlass 6 with maximium gap widths of 20 cm
for 0.73 m bay length 2.6 kg 5.72 lbs 150 3881.000
for 1.09 m bay length 4.0 kg 8.8 lbs 150 3881.001
for 1.57 m bay length 6.0 kg 13.2 lbs 100 3881.002
6 for 2.07 m bay length 8.0 kg 17.6 lbs 100 3881.003
for 2.57 m bay length 10.0 kg 22 lbs 100 3881.004
for 3.07 m bay length 10.7 kg 23.54 lbs 100 3881.005
6 Adjustable deckfor bay length from 1.57 m to 2.57 m
1.57 - 2.57 x 0.32 m 5' - 2" - 8' - 5" x 12" 21.9 kg 48.27 lbs 40 0723.281
The Steel plank 1/2 is a safe bridging element capable of bearing high loads for all scaffolding systems. It is preferred to wooden planks for use in areas with stringent fire protection requirements.
2 Long service life, reusable2 Lower weight compared with wooden planks2 Non-slip and non-inflammable2 If at least 2 steel planks are adjacent to one another,
they may also be used in brick guards.
The support length must be at least 10 cm at every support.
Secure the planks with locking pins 3 or 1 securing screw 4a/b for each end.
Gap covers
The steel-gap cover 5 can be used between two scaffolding decks on SpeedyScaf and Allround Scaffolding. For use on gap widths up to 13 cm.
21
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Steel plank, Gap decks Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 Steel plank, 0.30 m system-free, completely made of hot-dip galvanized steel
1.00 x 0.30 m 3' - 3" x 11" 6.5 kg 14.30 lbs 60 3880.1001.50 x 0.30 m 4' - 11" x 11" 10.3 kg 22.66 lbs 60 3880.1502.00 x 0.30 m 6' - 6" x 11" 12.8 kg 28.16 lbs 60 3880.2002.50 x 0.30 m 8' - 2" x 11" 15.3 kg 33.66 lbs 60 3880.250
2 2 Steel plank, 0.20 m system-free, completely made of hot-dip galvanized steel
1.00 x 0.20 m 3' - 3" x 8" 4.8 kg 10.56 lbs 100 3878.1001.50 x 0.20 m 4' - 11" x 8" 7.2 kg 15.84 lbs 100 3878.1502.00 x 0.20 m 6' - 6" x 8" 9.5 kg 20.90 lbs 100 3878.2002.50 x 0.20 m 8' - 2" x 8" 11.8 kg 25.96 lbs 100 3878.250
3 3 Locking pin for steel plank, dia. 11 mmnot for multiple use
0.08 m 0' - 3" 0.6 kg 1.32 lbs 100 3800.006
4a / b 4a Securing screw, long (red), steel, galvanizedFor securing of steel planks on steel decks
19 WS 0.08 x 0.03 m 0' - 3" x 1" 4.0 kg 8.80 lbs 50 3800.009
22 WS 0.08 x 0.03 m 0' - 3" x 1" 3.9 kg 8.58 lbs 50 3800.010
4b Securing screw, short (blue), steel, galvanizedFor securing of steel gap covers on steel decks
19 WS 0.04 x 0.02 m 0' - 2" x 1" 23.0 kg 50.6 lbs 50 3800.011
22 WS 0.04 x 0.02 m 0' - 2" x 1" 2.3 kg 5.06 lbs 50 3800.012
5 5 Steel gap cover, 0.32 mUse up to load vlass 6 with maximium gap widths of 20 cm
for 0.73 m bay length 2.6 kg 5.72 lbs 150 3881.000
for 1.09 m bay length 4.0 kg 8.8 lbs 150 3881.001
for 1.57 m bay length 6.0 kg 13.2 lbs 100 3881.002
6 for 2.07 m bay length 8.0 kg 17.6 lbs 100 3881.003
for 2.57 m bay length 10.0 kg 22 lbs 100 3881.004
for 3.07 m bay length 10.7 kg 23.54 lbs 100 3881.005
6 Adjustable deckfor bay length from 1.57 m to 2.57 m
1.57 - 2.57 x 0.32 m 5' - 2" - 8' - 5" x 12" 21.9 kg 48.27 lbs 40 0723.281
22
Toe boards
Toe boards Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 O-board bearer
steel0.73 m 2' - 5" 3.5 kg 7.70 lbs 50 2615.0731.06 m 3' - 6" 5.65 kg 12.43 lbs 50 2615.1061.09 m 3' - 7" 4.6 kg 10.12 lbs 50 2615.1091.15 m 3' - 10" 6.05 kg 13.31 lbs 50 2615.1151.40 m 4' - 7" 6.7 kg 14.74 lbs 50 2615.1401.57 m 5' - 2" 7.4 kg 16.28 lbs 50 2615.1572.07 m 6' - 9" 10.3 kg 22.66 lbs 50 2615.2072.13 m 7' - 0" 10.65 kg 23.43 lbs 50 2615.2132.57 m 8' - 5" 12.5 kg 27.50 lbs 50 2615.2573.05 m 10' - 0" 15 kg 33 lbs 50 2615.3053.07 m 10' - 1" 15.0 kg 33.00 lbs 50 2615.307
2
2 O-toe board, woodfor decks with U-insertion.for longitudinal and end sides
0.73 x 0.15 m 2' - 5" x 6" 1.5 kg 3.30 lbs 140 2649.0731.06 x 0.15 m 3' - 6" x 6" UR UR 140 UR1.09 x 0.15 m 3' - 7" x 6" 2.5 kg 5.50 lbs 140 2642.1091.15 x 0.15 m 3' - 10" x 6" 3.5 kg 7.70 lbs 140 2642.1151.29 x 0.15 m 4' - 3" x 6" 2.5 kg 5.50 lbs 140 0726.6481.40 x 0.15 m 4' - 7" x 6" 3.4 kg 7.48 lbs 140 2642.1401.57 x 0.15 m 5' - 2" x 6" 3.5 kg 7.70 lbs 140 2642.1572.07 x 0.15 m 6' - 9" x 6" 4.3 kg 9.46 lbs 140 2642.207
3 2.13 x 0.15 m 7' - 0" x 6" 4.5 kg 9.90 lbs 140 2642.2132.57 x 0.15 m 8' - 5" x 6" 5.7 kg 12.54 lbs 140 2642.2573.05 x 0.15 m 10' - 0" x 6" 6.5 kg 14.30 lbs 140 2642.2133.07 x 0.15 m 10' - 1" x 6" 6.3 kg 13.86 lbs 140 2642.307
3 O-steel toe board 0.73 x 0.15 m 2' - 5" x 6" 1.7 kg 3.74 lbs 280 2648.0731.06 x 0.15 m 3' - 6" x 6" 2.35 kg 5.17 lbs 140 0729.6501.09 x 0.15 m 3' - 7" x 6" 2.4 kg 5.28 lbs 140 2648.1091.40 x 0.15 m 4' - 7" x 6" 3.0 kg 6.60 lbs 140 2648.140
4 1.57 x 0.15 m 5' - 2" x 6" 3.3 kg 7.26 lbs 140 2648.1572.07 x 0.15 m 6' - 9" x 6" 4.3 kg 9.46 lbs 140 2648.2072.13 x 0.15 m 7' - 0" x 6" 4.4 kg 9.68 lbs 140 0725.313
2.57 x 0.15 m 8' - 5" x 6" 5.3 kg 11.66 lbs 140 2648.257
3.05 x 0.15 m 10' - 0" x 6" 6.3 kg 13.86 lbs 0730.750
3.07 x 0.15 m 10' - 1" x 6" 6.2 kg 13.64 lbs 140 2648.30754 O-toe board, aluminium
for longitudinal and end sides, lightweight and durable0.73 x 0.15 m 2' - 5" x 6" 1.5 kg 3.30 lbs 210 2641.0731.09 x 0.15 m 3' - 7" x 6" 2.2 kg 4.84 lbs 210 2641.109
1.40 x 0.15 m 4' - 7" x 6" 2.9 kg 6.38 lbs 210 2641.140
1.57 x 0.15 m 5' - 2" x 6" 3.1 kg 6.82 lbs 210 2641.157
2.07 x 0.15 m 6' - 9" x 6" 3.3 kg 7.26 lbs 210 2641.2072.57 x 0.15 m 8' - 5" x 6" 4.1 kg 9.02 lbs 210 2641.257
3.07 x 0.15 m 10' - 1" x 6" 4.9 kg 10.78 lbs 210 2641.307
5 Half-coupler with toe board pin 19 WS 1.0 kg 2.20 lbs 25 4708.01922 WS 1.0 kg 2.20 lbs 25 4708.022
The O-board bearer 1 is used to provide trip-proof decking surfaces with boards. Accesses with O-decks can also be provided.
The three-part side protection in the scaffolding bay and at the ends of the scaffolding is completed with Toe boards 2 - 4. The fitting is positioned between vertical standard and wedge.
Individual toe boards The toe boards can be individually designed in printing and painting.
The O-steel toe board 3 reduces the fire risk. The offset fittings permit a gap-free transition from the deck to the toe board. It features high stiffness and is easy to stack.
The O-toe board, aluminium 4 is the lightweight alternative and can also be used in the case of special fire protection requirements.
The lift-off prevention of the planks is provided by customer.
Advantages:2 Reduction of fire risk2 High stiffness and sturdiness
2 Easy stacking of the toe boards2 No gap between toe board and deck
Assembly of the wooden toe board
Assembly of the steel toe board
23
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Toe boards Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 O-board bearer
steel0.73 m 2' - 5" 3.5 kg 7.70 lbs 50 2615.0731.06 m 3' - 6" 5.65 kg 12.43 lbs 50 2615.1061.09 m 3' - 7" 4.6 kg 10.12 lbs 50 2615.1091.15 m 3' - 10" 6.05 kg 13.31 lbs 50 2615.1151.40 m 4' - 7" 6.7 kg 14.74 lbs 50 2615.1401.57 m 5' - 2" 7.4 kg 16.28 lbs 50 2615.1572.07 m 6' - 9" 10.3 kg 22.66 lbs 50 2615.2072.13 m 7' - 0" 10.65 kg 23.43 lbs 50 2615.2132.57 m 8' - 5" 12.5 kg 27.50 lbs 50 2615.2573.05 m 10' - 0" 15 kg 33 lbs 50 2615.3053.07 m 10' - 1" 15.0 kg 33.00 lbs 50 2615.307
2
2 O-toe board, woodfor decks with U-insertion.for longitudinal and end sides
0.73 x 0.15 m 2' - 5" x 6" 1.5 kg 3.30 lbs 140 2649.0731.06 x 0.15 m 3' - 6" x 6" UR UR 140 UR1.09 x 0.15 m 3' - 7" x 6" 2.5 kg 5.50 lbs 140 2642.1091.15 x 0.15 m 3' - 10" x 6" 3.5 kg 7.70 lbs 140 2642.1151.29 x 0.15 m 4' - 3" x 6" 2.5 kg 5.50 lbs 140 0726.6481.40 x 0.15 m 4' - 7" x 6" 3.4 kg 7.48 lbs 140 2642.1401.57 x 0.15 m 5' - 2" x 6" 3.5 kg 7.70 lbs 140 2642.1572.07 x 0.15 m 6' - 9" x 6" 4.3 kg 9.46 lbs 140 2642.207
3 2.13 x 0.15 m 7' - 0" x 6" 4.5 kg 9.90 lbs 140 2642.2132.57 x 0.15 m 8' - 5" x 6" 5.7 kg 12.54 lbs 140 2642.2573.05 x 0.15 m 10' - 0" x 6" 6.5 kg 14.30 lbs 140 2642.2133.07 x 0.15 m 10' - 1" x 6" 6.3 kg 13.86 lbs 140 2642.307
3 O-steel toe board 0.73 x 0.15 m 2' - 5" x 6" 1.7 kg 3.74 lbs 280 2648.0731.06 x 0.15 m 3' - 6" x 6" 2.35 kg 5.17 lbs 140 0729.6501.09 x 0.15 m 3' - 7" x 6" 2.4 kg 5.28 lbs 140 2648.1091.40 x 0.15 m 4' - 7" x 6" 3.0 kg 6.60 lbs 140 2648.140
4 1.57 x 0.15 m 5' - 2" x 6" 3.3 kg 7.26 lbs 140 2648.1572.07 x 0.15 m 6' - 9" x 6" 4.3 kg 9.46 lbs 140 2648.2072.13 x 0.15 m 7' - 0" x 6" 4.4 kg 9.68 lbs 140 0725.313
2.57 x 0.15 m 8' - 5" x 6" 5.3 kg 11.66 lbs 140 2648.257
3.05 x 0.15 m 10' - 0" x 6" 6.3 kg 13.86 lbs 0730.750
3.07 x 0.15 m 10' - 1" x 6" 6.2 kg 13.64 lbs 140 2648.30754 O-toe board, aluminium
for longitudinal and end sides, lightweight and durable0.73 x 0.15 m 2' - 5" x 6" 1.5 kg 3.30 lbs 210 2641.0731.09 x 0.15 m 3' - 7" x 6" 2.2 kg 4.84 lbs 210 2641.109
1.40 x 0.15 m 4' - 7" x 6" 2.9 kg 6.38 lbs 210 2641.140
1.57 x 0.15 m 5' - 2" x 6" 3.1 kg 6.82 lbs 210 2641.157
2.07 x 0.15 m 6' - 9" x 6" 3.3 kg 7.26 lbs 210 2641.2072.57 x 0.15 m 8' - 5" x 6" 4.1 kg 9.02 lbs 210 2641.257
3.07 x 0.15 m 10' - 1" x 6" 4.9 kg 10.78 lbs 210 2641.307
5 Half-coupler with toe board pin 19 WS 1.0 kg 2.20 lbs 25 4708.01922 WS 1.0 kg 2.20 lbs 25 4708.022
IND
24
Spare Parts, Accessories and Anchoring
iFurther scaffolding couplers can be found in the catalogue for System-free Accessories
For right-angled connection of tubes with dia. 48.30 mm
For connection at any angle of tubes with dia. 48.30 mm
Spare Parts. Accessories and Anchoring Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial6a
6b
7 8 6a Wedge. 6 mm with truss head rivet 5 x 11 mm 3.3 kg 7.26 lbs 25 6494.916Wedge. 6 mm without rivet 5 x 11 mm 13.0 kg 28.60 lbs 100 6494.918
6b Wedge LW. 6 mm with truss head rivet 5 x 11 mm 3.3 kg 7.26 lbs 25 6494.896Wedge LW. 6 mm without rivet 5 x 11 mm 12.0 kg 26.40 lbs 100 6494.899
7 Truss head rivet. 5 x 11 mm for securing the wedge 1.0 kg 2.20 lbs 100 6494.836
9 10 8 Blind rivet. 4.80 x 12 mm for securing the wedge 0.5 kg 1.10 lbs 100 6493.3239 Allround rosette cover with connected ledger
Polyethylene. fixing with disposable tie0.7 kg 1.54 lbs 10 4007.007
11 10 Allround rosette cover without connected ledgerPolyethylene. fixing with disposable tie
0.9 kg 1.98 lbs 10 4007.008
12 13 11 Wall tie 0.38 m 1' - 3" 1.6 kg 3.52 lbs 250 1754.0380.95 m 3' - 1" 3.7 kg 8.14 lbs 50 1754.0951.45 m 4' - 9" 5.7 kg 12.54 lbs 50 1754.1451.75 m 5' - 9" 5.8 kg 12.76 lbs 50 1754.175
12 Plastic wall insert. plasticdrilled hole dia. 14 mm
70 mm 3" 0.3 kg 0.66 lbs 25 4008.071100 mm 4" 0.3 kg 0.66 lbs 25 4008.101135 mm 5" 0.3 kg 0.66 lbs 25 4008.136
14 13 Ring screw. steel. galvanized.dia. 12 mm. for expanding plug
95 mm 4" 1.6 kg 3.52 lbs 10 4009.096120 mm 5" 1.8 kg 3.96 lbs 10 4009.121190 mm 7" 2.5 kg 5.50 lbs 10 4009.191230 mm 9" 3.0 kg 6.60 lbs 10 4009.231300 mm 12" 3.5 kg 7.70 lbs 10 4009.301350 mm 1' -2" 5.0 kg 11.00 lbs 10 4009.351
14 Scaffolding lockbasic set. 20 locks. 2 keys and code cardbasic set. 50 locks. 4 keys and code cardExpansion set with same locking as basic set. 20 locksExpansion set with same locking as basic set. 50 locks
4.2 kg 9.24 lbs 20 4000.00410.5 kg 23.10 lbs 50 4000.0054.2 kg 9.24 lbs 20 4000.00610.5 kg 23.10 lbs 50 4000.007
Couplers Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 2 3 1 Wedge-head coupler, rigid 19 WS 1.4 kg 3.08 lbs 25 2628.019
22 WS 1.4 kg 3.08 lbs 25 2628.0222 Wedge-head coupler, swivelling 19 WS 1.5 kg 3.30 lbs 25 2629.019
22 WS 1.5 kg 3.30 lbs 25 2629.0223 Twin wedge coupler 1.2 kg 2.64 lbs 25 2629.0004a Double coupler
Class BB. EN 74-1 RA BB C3 Mquality-monitored, for use in class B and BB on steel and aluminium tube
19 WS 1.3 kg 2.86 lbs 25 4700.019
4a / b 5a / b 22 WS 1.3 kg 2.86 lbs 25 4700.022
4b Rapid double couplerDescription as Pos. 4aacc. to approval Z-8.331-947
19 WS 1.3 kg 2.86 lbs 25 4777.019
22 WS 1.3 kg 2.86 lbs 25 4777.022
5a Swivel couplerClass B. EN 74-1 SW B C3 M.quality-monitored, for use in class B on steel and aluminium tube
19 WS 1.4 kg 3.08 lbs 25 4702.01922 WS 1.5 kg 3.30 lbs 25 4702.022
5b Rapid swivel couplerDescription as Pos. 5aacc. to approval Z-8.331-947
19 WS 1.5 kg 3.30 lbs 25 4778.019
22 WS 1.5 kg 3.30 lbs 25 4778.022
The wedge-head coupler 1/2 serves to connect 48.30 mm dia. scaffolding tubes to the rosettes of the standards.
The twin wedge coupler 3 is for connecting several standards to each other, e.g. for combining standards in support scaffolding construction.
154
Scaffolding must be anchored vertically to and parallel with the façade with resistance to both tensile and compressive stress. The Allround wall tie 0.80 m 11 must be secured with a standard coupler to the standard and supported with the fork plate on the U-section of the transverse ledger.
Couplers
Scaffolding couplers 4/5 connections, in steel, drop-forged.
The wedge 6a is made for wedge-heads with Ü64-imprinting (2000+ and Variant II)
The wedge LW 6b is made for wedge-heads with Ü939-imprinting (Lightweight).
Ü64
Ü939
For right-angled connection of tubes with dia. 48.30 mm
For connection at any angle of tubes with dia. 48.30 mm
By using the scaffolding lock, you can secure your scaffolding against unauthorized alteration or dismantling. Use in topmost level instead of locking pins.
25
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Spare Parts. Accessories and Anchoring Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial6a
6b
7 8 6a Wedge. 6 mm with truss head rivet 5 x 11 mm 3.3 kg 7.26 lbs 25 6494.916Wedge. 6 mm without rivet 5 x 11 mm 13.0 kg 28.60 lbs 100 6494.918
6b Wedge LW. 6 mm with truss head rivet 5 x 11 mm 3.3 kg 7.26 lbs 25 6494.896Wedge LW. 6 mm without rivet 5 x 11 mm 12.0 kg 26.40 lbs 100 6494.899
7 Truss head rivet. 5 x 11 mm for securing the wedge 1.0 kg 2.20 lbs 100 6494.836
9 10 8 Blind rivet. 4.80 x 12 mm for securing the wedge 0.5 kg 1.10 lbs 100 6493.3239 Allround rosette cover with connected ledger
Polyethylene. fixing with disposable tie0.7 kg 1.54 lbs 10 4007.007
11 10 Allround rosette cover without connected ledgerPolyethylene. fixing with disposable tie
0.9 kg 1.98 lbs 10 4007.008
12 13 11 Wall tie 0.38 m 1' - 3" 1.6 kg 3.52 lbs 250 1754.0380.95 m 3' - 1" 3.7 kg 8.14 lbs 50 1754.0951.45 m 4' - 9" 5.7 kg 12.54 lbs 50 1754.1451.75 m 5' - 9" 5.8 kg 12.76 lbs 50 1754.175
12 Plastic wall insert. plasticdrilled hole dia. 14 mm
70 mm 3" 0.3 kg 0.66 lbs 25 4008.071100 mm 4" 0.3 kg 0.66 lbs 25 4008.101135 mm 5" 0.3 kg 0.66 lbs 25 4008.136
14 13 Ring screw. steel. galvanized.dia. 12 mm. for expanding plug
95 mm 4" 1.6 kg 3.52 lbs 10 4009.096120 mm 5" 1.8 kg 3.96 lbs 10 4009.121190 mm 7" 2.5 kg 5.50 lbs 10 4009.191230 mm 9" 3.0 kg 6.60 lbs 10 4009.231300 mm 12" 3.5 kg 7.70 lbs 10 4009.301350 mm 1' -2" 5.0 kg 11.00 lbs 10 4009.351
14 Scaffolding lockbasic set. 20 locks. 2 keys and code cardbasic set. 50 locks. 4 keys and code cardExpansion set with same locking as basic set. 20 locksExpansion set with same locking as basic set. 50 locks
4.2 kg 9.24 lbs 20 4000.00410.5 kg 23.10 lbs 50 4000.0054.2 kg 9.24 lbs 20 4000.00610.5 kg 23.10 lbs 50 4000.007
Couplers Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 2 3 1 Wedge-head coupler, rigid 19 WS 1.4 kg 3.08 lbs 25 2628.019
22 WS 1.4 kg 3.08 lbs 25 2628.0222 Wedge-head coupler, swivelling 19 WS 1.5 kg 3.30 lbs 25 2629.019
22 WS 1.5 kg 3.30 lbs 25 2629.0223 Twin wedge coupler 1.2 kg 2.64 lbs 25 2629.0004a Double coupler
Class BB. EN 74-1 RA BB C3 Mquality-monitored, for use in class B and BB on steel and aluminium tube
19 WS 1.3 kg 2.86 lbs 25 4700.019
4a / b 5a / b 22 WS 1.3 kg 2.86 lbs 25 4700.022
4b Rapid double couplerDescription as Pos. 4aacc. to approval Z-8.331-947
19 WS 1.3 kg 2.86 lbs 25 4777.019
22 WS 1.3 kg 2.86 lbs 25 4777.022
5a Swivel couplerClass B. EN 74-1 SW B C3 M.quality-monitored, for use in class B on steel and aluminium tube
19 WS 1.4 kg 3.08 lbs 25 4702.01922 WS 1.5 kg 3.30 lbs 25 4702.022
5b Rapid swivel couplerDescription as Pos. 5aacc. to approval Z-8.331-947
19 WS 1.5 kg 3.30 lbs 25 4778.019
22 WS 1.5 kg 3.30 lbs 25 4778.022
26
Brackets
Brackets Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 O-console bracket LW, 1.15 m wide
with O-section, for 2 x 0.32 and 2 x 0.19 wide decks1.15 m 3' - 10" 12.70 kg 28.00 lbs 30 2631.115
2 O-console bracket, with 2 hooks, 0.36 m widefor O-decks, 0.32 m wide
0.36 m 1' - 2" 7.2 kg 15.84 lbs 80 0714.894
1 2 3 3 O-console bracket, with 2 hooks, 0.73 m widefor O-decks, 2 x 0.32 m wide
0.36 m 1' - 2" 8.7 kg 19.14 lbs 40 0714.893
4 Bracket brace, 2.05 m 2.05 m 6' - 9" 8.8 kg 19.36 lbs 50 2631.205
5 O-console bracket, 0.26 m wide, without spigot for O-deck 0.19 m wide
0.26 m 0' - 10" 2.3 kg 5.06 lbs 250 2631.026
6 O-console bracket, 0.36 m wide, without spigotfor O-deck 0.32 m wide
0.36 m 1' - 2" 3.4 kg 7.48 lbs 100 2630.038
4 7 O-console bracket, 0.39 m widefor O-deck 0.32 m wide
0.39 m 1' - 3" 3.9 kg 8.58 lbs 250 2631.039
5 6 7 8 O-console bracket, 0.69 m wide, adjustablepushed in: for accommodating 2 x 0.19 m O-steel decks T4pulled out: for accommodating 3 x 0.19 m O-steel decks T4
0.69 m 2' - 3" 4.2 kg 9.24 lbs 125 2630.069
9 O-console bracket, 0.65 m wide 0.65 m 2' - 1" 6.5 kg 14.30 lbs 80 2631.065
8 11 10 O-console bracket, 0.73 m widefor 2 O-decks 0.32 m or 1 O-deck 0.61 m wide
0.73 m 2' - 5" 6.8kg 14.96 lbs 80 2631.073
11 O-console bracket, 1.09 m widefor 3 O-decks 0.32 m wide
1.09 m 3' - 7" 12.0 kg 26.40 lbs 30 2631.109
9-10
Original Allround Scaffolding from Layher is made up of more than just standards and ledgers: complete system technology with additional parts and accessories to suit the construction site provides assembly benefits at all sites. System brackets are available for quickly widening scaffolding bays and for converting projecting building parts and eaves.
Widening of scaffolding can be easily performed by fitting Brackets in the rosette on the standard.
Widened scaffolding can also be constructed with O-ledgers, base collar and diagonal braces in any projection depending on the working load. Structural strength verification is required here for each individual case.
The Bracket brace 2.05 m 4 is used to support the 0.73 m bracket.
The Bracket, 1.09 m wide 10 is used for widening birdcage scaffolding. Transverse ledger at the height of the lower bracket connection is required.
The O-bracket 0.69 m wide, adjustable 8 is used incrementally and facilitates optimum stand height and wall distance
27
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Brackets Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 O-console bracket LW, 1.15 m wide
with O-section, for 2 x 0.32 and 2 x 0.19 wide decks1.15 m 3' - 10" 12.70 kg 28.00 lbs 30 2631.115
2 O-console bracket, with 2 hooks, 0.36 m widefor O-decks, 0.32 m wide
0.36 m 1' - 2" 7.2 kg 15.84 lbs 80 0714.894
1 2 3 3 O-console bracket, with 2 hooks, 0.73 m widefor O-decks, 2 x 0.32 m wide
0.36 m 1' - 2" 8.7 kg 19.14 lbs 40 0714.893
4 Bracket brace, 2.05 m 2.05 m 6' - 9" 8.8 kg 19.36 lbs 50 2631.205
5 O-console bracket, 0.26 m wide, without spigot for O-deck 0.19 m wide
0.26 m 0' - 10" 2.3 kg 5.06 lbs 250 2631.026
6 O-console bracket, 0.36 m wide, without spigotfor O-deck 0.32 m wide
0.36 m 1' - 2" 3.4 kg 7.48 lbs 100 2630.038
4 7 O-console bracket, 0.39 m widefor O-deck 0.32 m wide
0.39 m 1' - 3" 3.9 kg 8.58 lbs 250 2631.039
5 6 7 8 O-console bracket, 0.69 m wide, adjustablepushed in: for accommodating 2 x 0.19 m O-steel decks T4pulled out: for accommodating 3 x 0.19 m O-steel decks T4
0.69 m 2' - 3" 4.2 kg 9.24 lbs 125 2630.069
9 O-console bracket, 0.65 m wide 0.65 m 2' - 1" 6.5 kg 14.30 lbs 80 2631.065
8 11 10 O-console bracket, 0.73 m widefor 2 O-decks 0.32 m or 1 O-deck 0.61 m wide
0.73 m 2' - 5" 6.8kg 14.96 lbs 80 2631.073
11 O-console bracket, 1.09 m widefor 3 O-decks 0.32 m wide
1.09 m 3' - 7" 12.0 kg 26.40 lbs 30 2631.109
9-10
28
Comfort stairway
Platform stairway, Comfort stairway Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 3 1 Comfort stairway, aluminium, stair class B acc. to EN 12811-1
O-version, 0.64 m wide, 2.00 m high, for 2.57 m bay length, step height 0.22 m
2.57 x 0.64 m 8' - 5" x 2' - 1" 29.2 kg 69.24 lbs 10 2635.257
O version, 0.64m wide, 2.00m high, for 3.05 m bay length, step height 0.22m 3.05 x 0.64 m 10' - 0" x 2' - 1" 34.2 kg 75.24 lbs 10 0729.771O-version, 0.94 m wide, 2.00 m high, for 2.57 m bay length, step height 0.22 m
2.57 x 0.94 m 8' - 5" x 3' - 1" 39.1 kg 86.02 lbs 10 2635.258
2 Starting stairway, aluminium, stair class A acc. to EN 12811-1O-version, 0.64 m wide, 1.00 m high, step height 0.20 m 1.20 x 0.64 m 3' - 11" x 2' - 1" 13.8 kg 30.36 lbs 10 2633.003O-version, 0.64 m wide, 1.20 m high, step height 0.20 m 1.60 x 0.64 m 5' - 3" x 2' - 1" 15.3 kg 33.66 lbs 10 2633.002
3 Stairway guardrail, steel galvanized, for Pos. 1, 2, 32.00 m high, for 2.57 m bay length with U-fork 2.57 m 8' - 5" 18.1 kg 39.82 lbs 70 2638.2572.00 m high, for 3.05 m bay length with U-fork 3.05 m 10' - 00" 19.2 kg 43.56 lbs 70 0726.0732.00 m high, for 3.07 m bay length with U-fork 3.07 m 10' - 1" 20.1 kg 44.22 lbs 70 2638.3072.00 m high, for 2.57 m bay length with swivelling wedge-head 2.57 m 8' - 5" 18.0 kg 39.60 lbs 70 2638.2582.00 m high, for 3.07 m bay length with swivelling wedge-head 3.07 m 10' - 1" 21.0 kg 46.20 lbs 70 2638.3081.50 m high, for 2.57 m bay length with U-fork 2.57 m 8' - 5" 17.0 kg 37.40 lbs 70 2638.2511.50 m high, for 2.57 m bay length with swivelling wedge-head 2.57 m 8' - 5" 16.7 kg 36.74 lbs 70 2638.252
4 Internal stairway guardrail T12, steel galvanized, mandatory for opposite-direction stairways2.00 m high 2.25 m 7' - 4" 13.5 kg 29.70 lbs 20 1752.007
2 4 2.00 m high 2.25 m 7' - 4" 13.5 kg 29.70 lbs 20 1752.0081.50 m high 2.00 m 6' - 6" 11.5 kg 25.30 lbs 20 1752.0121.00 m high 0.90 m 2' - 11" 7.8 kg 17.16 lbs 20 1752.011
5 Initial stairway guardrail 0.90 x 1.70 m 2' - 11" x 5' - 7" 9.9 kg 21.78 lbs 20 1752.009
6 Stair guardrail postis used for the stairwell at the top level
1.30 m 4' - 3" 6.1 kg 13.42 lbs 50 2638.400
7 O-ledger with wedge-head and U-fork, is used for the stairwell at the top level
5 for 2.57 m bay length 1.90 m 6' - 3" 7.8 kg 17.16 lbs 50 2638.4016for 3.07 m bay length 2.15 m 7' x 1" 8.8 kg 19.36 lbs 50 2638.402
8 Stairway guardrail adaptor 0.7 kg 1.54 lbs 25 2637.000
9 Stairway guardrail 6.2 kg 13.64 lbs 40 1752.004
6.2 kg 13.64 lbs 40 1752.014
7
9
8
Safe, fatigue-free stairway ascent – also with transportation of materials – without impairment of the working surface. It is simple to construct a 4-standard stairtower, either integrated into the scaffolding or as a free-standing access structure anchored on the building. Both parallel and opposite stairways are possible here. There is no hindrance to work on scaffolding with this version.
The Comfort stairway 1. It is equipped with 175 mm wide, grooved
steps. That leads to more comfortable access – especially for high access heights. The stronger stringer profile offers only small bending guardrails, internal guardrails and stairwell guardrails can be used from the platform stairway.
The Internal stairway guardrail 4 is required for opposite stairways and serves to increase the stabi-lity of single-flight stairways.
The stairway guardrail post 6 with the O-ledger
with wedge-head and U-fork 7 is used for the stairwell at the top level. Optionally the exit of the top stair level can be assembled with console brackets. In that case, the stairwell guardrail is not needed.
at 1.00 m height
at 1.20 m height
29
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Platform stairway, Comfort stairway Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 3 1 Comfort stairway, aluminium, stair class B acc. to EN 12811-1
O-version, 0.64 m wide, 2.00 m high, for 2.57 m bay length, step height 0.22 m
2.57 x 0.64 m 8' - 5" x 2' - 1" 29.2 kg 69.24 lbs 10 2635.257
O version, 0.64m wide, 2.00m high, for 3.05 m bay length, step height 0.22m 3.05 x 0.64 m 10' - 0" x 2' - 1" 34.2 kg 75.24 lbs 10 0729.771O-version, 0.94 m wide, 2.00 m high, for 2.57 m bay length, step height 0.22 m
2.57 x 0.94 m 8' - 5" x 3' - 1" 39.1 kg 86.02 lbs 10 2635.258
2 Starting stairway, aluminium, stair class A acc. to EN 12811-1O-version, 0.64 m wide, 1.00 m high, step height 0.20 m 1.20 x 0.64 m 3' - 11" x 2' - 1" 13.8 kg 30.36 lbs 10 2633.003O-version, 0.64 m wide, 1.20 m high, step height 0.20 m 1.60 x 0.64 m 5' - 3" x 2' - 1" 15.3 kg 33.66 lbs 10 2633.002
3 Stairway guardrail, steel galvanized, for Pos. 1, 2, 32.00 m high, for 2.57 m bay length with U-fork 2.57 m 8' - 5" 18.1 kg 39.82 lbs 70 2638.2572.00 m high, for 3.05 m bay length with U-fork 3.05 m 10' - 00" 19.2 kg 43.56 lbs 70 0726.0732.00 m high, for 3.07 m bay length with U-fork 3.07 m 10' - 1" 20.1 kg 44.22 lbs 70 2638.3072.00 m high, for 2.57 m bay length with swivelling wedge-head 2.57 m 8' - 5" 18.0 kg 39.60 lbs 70 2638.2582.00 m high, for 3.07 m bay length with swivelling wedge-head 3.07 m 10' - 1" 21.0 kg 46.20 lbs 70 2638.3081.50 m high, for 2.57 m bay length with U-fork 2.57 m 8' - 5" 17.0 kg 37.40 lbs 70 2638.2511.50 m high, for 2.57 m bay length with swivelling wedge-head 2.57 m 8' - 5" 16.7 kg 36.74 lbs 70 2638.252
4 Internal stairway guardrail T12, steel galvanized, mandatory for opposite-direction stairways2.00 m high 2.25 m 7' - 4" 13.5 kg 29.70 lbs 20 1752.007
2 4 2.00 m high 2.25 m 7' - 4" 13.5 kg 29.70 lbs 20 1752.0081.50 m high 2.00 m 6' - 6" 11.5 kg 25.30 lbs 20 1752.0121.00 m high 0.90 m 2' - 11" 7.8 kg 17.16 lbs 20 1752.011
5 Initial stairway guardrail 0.90 x 1.70 m 2' - 11" x 5' - 7" 9.9 kg 21.78 lbs 20 1752.009
6 Stair guardrail postis used for the stairwell at the top level
1.30 m 4' - 3" 6.1 kg 13.42 lbs 50 2638.400
7 O-ledger with wedge-head and U-fork, is used for the stairwell at the top level
5 for 2.57 m bay length 1.90 m 6' - 3" 7.8 kg 17.16 lbs 50 2638.4016for 3.07 m bay length 2.15 m 7' x 1" 8.8 kg 19.36 lbs 50 2638.402
8 Stairway guardrail adaptor 0.7 kg 1.54 lbs 25 2637.000
9 Stairway guardrail 6.2 kg 13.64 lbs 40 1752.004
6.2 kg 13.64 lbs 40 1752.014
7
9
8
30
Modular stairway, outside access, construction stairtower 200
With the Modular stairway, accesses that always fit and that match the system can be constructed. Any intermediate dimension can be achieved simply by fitting together the individual stairway parts. The stairway rises 20 cm from step to step, and the bottom element with spindles is used for precise levelling. A wide variety of applications thanks to modular design. Little space needed for transport and assembly.
Height differences from 0.60 m to 1.60 m can be bridged. Design: steel, hot-dip galvanized. Connection of elements with Bolt dia. 12 x 55 mm and Safety clip dia. 2.8 mm (2 per joint). (They are already included in the scope of delivery).
Constructing outward-facing access bays requires simple Scaffolding ladders together with the Swing door and the Guardrail standard, 1.70 m, bended.
Layher simple ladders for scaffolding individually or when connected to each other. The stile connec-tions must have proper support and be secured with spring clips.
Stairtowers can be used in many areas outside scaffolding construction, e.g. in public areas and as escape stairtowers.
The O-stairway stringer 200, 10-step 7 and the Landing-type stairway, aluminium (see page 36) are not just a quick and comfortable means of upward access which permits problem-free vertical transporta-tion of materials and working on all scaffolding levels, they also easily enable stairtowers of differing widths and load capacities to be built for the purpose of rapidly linking up various construction site levels.
2,57
1,50
0,20
Modular stairway, outside access, construction stairtower 200 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 O-stair head section, 0.60 m
O-stair head section, 0.95 mSpigot preassembled with bolts and safety clips
0.60 m 2' - 0" 13.0 kg 28.60 lbs 15 0709.5680.95 m 3' - 1" 12.4 kg 27.28 lbs 50 0709.407
2 2 Stair middle section, 0.60 mStair middle section, 0.95 mSpigot preassembled with bolts and safety clips
0.60 m 2' - 0" 9.2 kg 20.24 lbs 15 2638.0600.95 m 3' - 1" 10.2 kg 22.44 lbs 50 2638.095
3 3 Stair foot section, 0.60 mStair foot section, 0.95 m
0.60 m0.95 m
2' - 0"3' - 1"
6.8 kg7.8 kg
14.96 lbs17.16 lbs
1550
2639.0602639.095
4 4 Ladder bracket with coupler, steel 0.4 m 1' - 4" 3.2 kg 7.04 lbs 4104.005
5 6 7 5 Swing door, 0.73 m, adjustable 0.73 m 2' - 5" 8.8 kg 19.36 lbs 40 2627.011
6 Swing door, 1.00 m, adjustable 1.00 m 3' - 3" 10.5 kg 23.10 lbs 40 2627.012
7 Guardrail standard, 1.70 m, bended 1.70 m 5' -7 " 8.5 kg 18.70 lbs 50 2606.170
8 8 O-stairway stringer 200 LW, 10-step, 2.00 m storey height 2.00 x 2.57 m 6' - 6" x 8' - 5" 28.4 kg 62.48 lbs 20 2638.011
9 Ladder 3 rungs 0.92 m 3' - 0" 4.7 kg 10.34 lbs 4105.0035 rungs 1.53 m 5' - 0" 7.8 kg 17.16 lbs 4105.005
6 rungs 1.83 m 6' - 0" 9.3 kg 20.46 lbs 4105.006
10 Pole ladder, aluminium 10 rungs 2.90 x 0.46 m 9' - 6" x 1' - 6" 7.2 kg 15.84 lbs 50 1004.01014 rungs 4.00 x 0.46 m 13' - 1" x 1' - 6" 10.0 kg 22.00 lbs 50 1004.01417 rungs 4.90 x 0.46 m 16' - 1" x 1' - 6" 12.0 kg 26.40 lbs 50 1004.017
20 rungs 5.70 x 0.46 m 18' - 8" x 1' - 6" 14.1 kg 31.02 lbs 50 1004.020
Pole ladder, steel 6 rungs 1.50 x 0.43 m 4' - 11" x 1' - 5" 12.0 kg 26.40 lbs 50 1002.0068 rungs 2.00 x 0.43 m 6' - 6" x 1' - 5" 15.0 kg 33.00 lbs 50 1002.00812 rungs 3.00 x 0.43 m 9' - 9" x 1' - 5" 21.5 kg 47.30 lbs 50 1002.01216 rungs 4.00 x 0.43 m 13' - 0" x 1' - 5" 28.0 kg 61.60 lbs 50 1002.016
911 Spring clip, 11 mm pin for securing the joint
connections of the extended simple steel/aluminium scaffolding ladder Ref. No. 1002/1004
0.1 kg 0.22 lbs 200 416.000
10
11
2,57
1,50
0,20
31
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Modular stairway, outside access, construction stairtower 200 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 O-stair head section, 0.60 m
O-stair head section, 0.95 mSpigot preassembled with bolts and safety clips
0.60 m 2' - 0" 13.0 kg 28.60 lbs 15 0709.5680.95 m 3' - 1" 12.4 kg 27.28 lbs 50 0709.407
2 2 Stair middle section, 0.60 mStair middle section, 0.95 mSpigot preassembled with bolts and safety clips
0.60 m 2' - 0" 9.2 kg 20.24 lbs 15 2638.0600.95 m 3' - 1" 10.2 kg 22.44 lbs 50 2638.095
3 3 Stair foot section, 0.60 mStair foot section, 0.95 m
0.60 m0.95 m
2' - 0"3' - 1"
6.8 kg7.8 kg
14.96 lbs17.16 lbs
1550
2639.0602639.095
4 4 Ladder bracket with coupler, steel 0.4 m 1' - 4" 3.2 kg 7.04 lbs 4104.005
5 6 7 5 Swing door, 0.73 m, adjustable 0.73 m 2' - 5" 8.8 kg 19.36 lbs 40 2627.011
6 Swing door, 1.00 m, adjustable 1.00 m 3' - 3" 10.5 kg 23.10 lbs 40 2627.012
7 Guardrail standard, 1.70 m, bended 1.70 m 5' -7 " 8.5 kg 18.70 lbs 50 2606.170
8 8 O-stairway stringer 200 LW, 10-step, 2.00 m storey height 2.00 x 2.57 m 6' - 6" x 8' - 5" 28.4 kg 62.48 lbs 20 2638.011
9 Ladder 3 rungs 0.92 m 3' - 0" 4.7 kg 10.34 lbs 4105.0035 rungs 1.53 m 5' - 0" 7.8 kg 17.16 lbs 4105.005
6 rungs 1.83 m 6' - 0" 9.3 kg 20.46 lbs 4105.006
10 Pole ladder, aluminium 10 rungs 2.90 x 0.46 m 9' - 6" x 1' - 6" 7.2 kg 15.84 lbs 50 1004.01014 rungs 4.00 x 0.46 m 13' - 1" x 1' - 6" 10.0 kg 22.00 lbs 50 1004.01417 rungs 4.90 x 0.46 m 16' - 1" x 1' - 6" 12.0 kg 26.40 lbs 50 1004.017
20 rungs 5.70 x 0.46 m 18' - 8" x 1' - 6" 14.1 kg 31.02 lbs 50 1004.020
Pole ladder, steel 6 rungs 1.50 x 0.43 m 4' - 11" x 1' - 5" 12.0 kg 26.40 lbs 50 1002.0068 rungs 2.00 x 0.43 m 6' - 6" x 1' - 5" 15.0 kg 33.00 lbs 50 1002.00812 rungs 3.00 x 0.43 m 9' - 9" x 1' - 5" 21.5 kg 47.30 lbs 50 1002.01216 rungs 4.00 x 0.43 m 13' - 0" x 1' - 5" 28.0 kg 61.60 lbs 50 1002.016
911 Spring clip, 11 mm pin for securing the joint
connections of the extended simple steel/aluminium scaffolding ladder Ref. No. 1002/1004
0.1 kg 0.22 lbs 200 416.000
10
11
In the 12-standard construction stairtower 200, the stairways are made up of individual O-stairway stringers 200, 10-step and steps made of standard decks. Thus the weights/volumes of the individual parts are lower, the proportions of standard material higher, and the additional costs lower. In addition, different variants of stairway widths are possible.
32
Stairway towers 500 and 750
1 2
3
4 5 6
7 8
9
10
Stairtowers 750
The O-ledger with gap cover LW is needed at the start and end of a stairway to an intermediate landing (in conjunction with U-steel decks).
Separate stringers and standard decking ensure variable widths for the stairway (1.09 m, 1.57 m, 2.07 m). This keeps the weight and the volume of the components low and permits a high proportion of standard Layher Allround material to be used.
.
1,00
2,57
0,166
0,50
0,73
0,166
U-stairway stringer 750
8 steps 5 steps 2 steps
Riser s 16.6 cm 16.7 cm 16.7 cm
Tread a 31.0 cm 29.0 cm 32.7 cm
The stairtower 750 with child protected guardrail is thanks to its riser measures mainly used in public areas and event constructions as access to stages and grand-stands. Its features are the high load-bearing capacity and the reduced stairway riser.
A height adjustment outside the 2.00 m or 1.50 m standard dimension is achieved with 5-step stairway stringers (1.00 m high). Alternatively, the stairway stringers 750 can also be combined in the stairtower structure.
The stairtower structures must be verified for each single structure as regards structural strength.
0,166
1,57
0,50
LAYHER
L IG H T W EIG HT
33
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Stairway towers 500 and 750
1 2
3
4 5 6
7 8
9
10
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 O-stairway stringer 750 LW, 2 steps (0.50 m storey height) 0.50 x 0.73 m 1' - 8" x 2' - 5" 10.8 kg 23.80 lbs 2638.013
2 O-stairway stringer 750 LW, 5 steps (1.00 m storey height) 1.00 x 1.57 m 6' - 6" x 5' - 2" 19.9 kg 43.87 lbs 20 2638.014
3 O-stairway stringer 750 LW, 8 steps (1.50 m storey height) 1.50 x 2.57 m 4' - 11" x 8' - 5" 37.2 kg 81.84 lbs 20 2638.015
4 Guardrail for stairs 750 T12, 2 steps (0.50 m storey height) 0.50 x 0.73 m 1' - 8" x 2' - 5" 14.8 kg 32.62 lbs 25 2616.110
5 Guardrail for stairs 750 T12, 5 steps (1.00 m storey height) 1.00 x 1.57 m 6' - 6" x 5' - 2" 24.3 kg 53.46 lbs 25 2616.105
6 Guardrail for stairs 750 T12, 8 steps (1.50 m storey height) 1.50 x 2.57 m 4' - 11" x 8' - 5" 34.6 kg 76.12 lbs 25 2616.101
7 Guardrail T12 with child protection 0.45 m 1' - 6" 10.4 kg 22.88 lbs 25 2616.0450.73 m 2' - 5" 14.1 kg 31.02 lbs 25 2616.0731.09 m 3' - 7" 17.8 kg 39.16 lbs 25 2616.1091.29 m 4' - 3" 19.4 kg 42.68 lbs 25 2616.1291.40 m 4' - 7" 20.6 kg 45.32 lbs 25 2616.1401.57 m 5' - 2" 22.7 kg 49.94 lbs 25 2616.1572.07 m 6' - 9" 27.7 kg 60.94 lbs 25 2616.2072.57 m 7' - 0" 32.7 kg 71.94 lbs 25 2616.257
8 O-ledger with gap cover LW, 0.11 m width 0.73 m 2' - 5" 5.3 kg 11.66 lbs 50 2675.0741.09 m 3' - 7" 8.0 kg 17.60 lbs 50 2675.1101.29 m 4' - 3" 9.6 kg 21.12 lbs 50 2675.1301.40 m 4' - 7" 10.0 kg 22.00 lbs 50 2675.1411.57 m 5' - 2" 11.7 kg 25.74 lbs 50 2675.1582.07 m 6' - 9" 15.0 kg 33.00 lbs 50 2675.2082.57 m 8' - 5" 19.2 kg 42.24 lbs 20 2675.258
9 O-gap cover with angle 1.09 m 3' - 7" 5.1 kg 11.22 lbs 50 3868.1101.40 m 4' - 7" 6.3 kg 13.86 lbs 50 3868.1411.57 m 5' - 2" 6.9 kg 15.18 lbs 50 3868.1582.07 m 6' - 9" 9.4 kg 20.68 lbs 50 3868.208
10 Guardrail fixing device 0.8 kg 1.76 lbs 25 2636.000
Installation situation of Guardrail fixing device
Installation situation of O-ledger with gap cover LW
Installation situation for height adjustment with 5 steps
LAYHER
L IG H T W EIG HT
UR: 750 stringers available in U-system upon requets
34
Step cover
Step cover 1 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 Step coverNecessary fixation material: each 3 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.33 m 5' - 2" x 1' - 1" 3.2 kg 7.04 lbs 4000.157
2.07 x 0.33 m 6' - 9" x 1' - 1" 4.2 kg 9.24 lbs 4000.207
2 2 RiserNecessary fixation material: each 2 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.16 m 5' - 2" x 6" 1.6 kg 3.52 lbs 4001.1572.07 x 0.16 m 6' - 6" x 6" 2.0 kg 4.40 lbs 4001.207
3 3 Landing cover with nose for adjacent stairNecessary fixation material: each 21 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 1.57 m 5' - 2" x 5' - 2" 15.3 kg 33.66 lbs 4002.1572.07 x 2.07 m 6' - 9" x 6' - 9" 26.6 kg 58.52 lbs 4002.207
4 4 Landing cover a) flat, for use in intermediate bayNecessary fixation material: each 2 pcs. (of PU 50 pcs.) Pos. 5 –7
b) flat, for use in intermediate bayNecessary fixation material: each 6 pcs. (of PU 50 pcs.) Pos. 5 –7
c) flat, for use on platformsNecessary fixation material: each 18 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.15 m 5' - 2" x 6" 1.5 kg 3.30 lbs 4003.0152.07 x 0.15 m 6' - 9" x 6" 2.0 kg 4.40 lbs 4003.016
1.57 x 0.73 m 5' - 2" x 2' - 5" 7.1 kg 15.62 lbs 4003.0732.07 x 0.73 m 6' - 9" x 2' - 5" 9.4 kg 20.68 lbs 4003.074
1.57 x 1.57 m 5' - 2" x 5' - 2" 15.3 kg 33.66 lbs 4003.1572.07 x 2.07 m 6' - 9" x 6' - 9" 26.6 kg 58.52 lbs 4003.207
5-7 5 Countersunk bolt M8 x 30 0.6 kg 1.32 lbs 50 6495.016
6 Securing nut M8 0.2 kg 0.44 lbs 50 6494.513
7 Spring washer A 8.4 x 18 mm 0.3 kg 0.66 lbs 50 6495.017
Sure footing with Layher step covers. With their non-slip surface using quartz sand, they ensure maximum safety on Layher stair-ways in rain, snow and ice conditions. The step covers are made from glass-fibre-reinforced plastic. They are permanently resistant to weather effects, easy to clean, electrically non-conductive and flame-retardant. They can be fitted quickly and are optimally matched to the Layher stairway range.
A dependable solution for safe footing in all weather conditions.
12
3
4
b
a
c
UR: Other dimensions available upon requests
35
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Step cover 1 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 Step coverNecessary fixation material: each 3 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.33 m 5' - 2" x 1' - 1" 3.2 kg 7.04 lbs 4000.157
2.07 x 0.33 m 6' - 9" x 1' - 1" 4.2 kg 9.24 lbs 4000.207
2 2 RiserNecessary fixation material: each 2 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.16 m 5' - 2" x 6" 1.6 kg 3.52 lbs 4001.1572.07 x 0.16 m 6' - 6" x 6" 2.0 kg 4.40 lbs 4001.207
3 3 Landing cover with nose for adjacent stairNecessary fixation material: each 21 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 1.57 m 5' - 2" x 5' - 2" 15.3 kg 33.66 lbs 4002.1572.07 x 2.07 m 6' - 9" x 6' - 9" 26.6 kg 58.52 lbs 4002.207
4 4 Landing cover a) flat, for use in intermediate bayNecessary fixation material: each 2 pcs. (of PU 50 pcs.) Pos. 5 –7
b) flat, for use in intermediate bayNecessary fixation material: each 6 pcs. (of PU 50 pcs.) Pos. 5 –7
c) flat, for use on platformsNecessary fixation material: each 18 pcs. (of PU 50 pcs.) Pos. 5 –7
1.57 x 0.15 m 5' - 2" x 6" 1.5 kg 3.30 lbs 4003.0152.07 x 0.15 m 6' - 9" x 6" 2.0 kg 4.40 lbs 4003.016
1.57 x 0.73 m 5' - 2" x 2' - 5" 7.1 kg 15.62 lbs 4003.0732.07 x 0.73 m 6' - 9" x 2' - 5" 9.4 kg 20.68 lbs 4003.074
1.57 x 1.57 m 5' - 2" x 5' - 2" 15.3 kg 33.66 lbs 4003.1572.07 x 2.07 m 6' - 9" x 6' - 9" 26.6 kg 58.52 lbs 4003.207
5-7 5 Countersunk bolt M8 x 30 0.6 kg 1.32 lbs 50 6495.016
6 Securing nut M8 0.2 kg 0.44 lbs 50 6494.513
7 Spring washer A 8.4 x 18 mm 0.3 kg 0.66 lbs 50 6495.017
36
ÜberschriftFW System
To provide wide-span bridging too, or to support heavier loads, the Layher range now includes the Allround FW System (FW). This additional Allround component is a modular-designed lattice beam of high load-bearing capacity that can be completely integrated into the Allround construction kit thanks to the standardised system dimensions. For lattice structures, only three essential supplementary components are needed, and they can be rapidly connected using pins: an Allround FW post 2, a sturdy Allround FW chord 1 as the top and bottom chord, and a length-adjustable Allround FW diagonal rod consisting of 3 / 4 / 6 / 9. A contribution to the high load-bearing capacity of the new product is made on the one hand by the use of efficient steel grades and the design height of the Allround FW System, and on the other hand by its installation in the Allround system standard dimension. This ensures a structurally advantageous and central force transmission – an offset is prevented.
A further special feature is the stepless adjustment of the diagonal rods using a turnbuckle – for example to build slightly higher structures. This compensates for unwelcome sagging. A crossed diagonal configuration is also possible for transmitting both positive and negative lateral forces.
The modular design of the Allround FW System not only permits flexible heights, widths and lengths for optimum adjustment to load and geometry requirements, but also ensures economical transport and assembly. This is thanks to bolt-free connection technologies and the low weight of the handy individual components, which is 19 kilograms maximum. If no crane is available at the site, the Allround FW System can be assembled manually without any problem – also in cantilevered construction from a secured level.
1 Pos. Description DimensionsL / H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 FW chord 1.57 m 5' - 2" 10.50 kg 23.10 lbs 20 2646.157
2.07 m 6' -9" 13.90 kg 30.58 lbs 20 2646.207
2.57 m 8' - 5" 17.40 kg 38.28 lbs 20 2646.257
2a 2b 3 2a FW post 1.00 m 3' - 3" 8.80 kg 19.36 lbs 28 2646.100
1.50 m 4' - 11" 11.60 kg 25.52 lbs 28 2646.150
2.00 m 6' - 6" 16.20 kg 35.64 lbs 28 2646.200
0.00 lbs
4 2b FM post, extended for accessible bridgings
2.50 m 8'- 2" 19.00 kg 41.80 lbs 28 2646.250
3 FM endfitting with turnbuckle 3.80 kg 8.36 lbs 100 2646.202
4 FM endfitting 1.00 kg 2.20 lbs 100 2646.203
5a 5b 6 5a FM post, single-side-connectionfor connection to the Allround Scaffolding in longitudinal direction
1.00 m 3' - 3" 6.40 kg 14.08 lbs 28 2646.105
1.50 m 4' - 11" 9.20 kg 20.24 lbs 28 2646.155
2.00 m 6' - 6" 13.80 kg 30.36 lbs 28 2646.205
5b FM post, single-side connection, extended 2.50 m 8'- 2" 16.60 kg 36.52 lbs 28 2646.255
7 6 FM diagonal rod
for 2.57 x 2.00 m bay 2.37 m 7' - 9' 3.30 kg 7.26 lbs 20 2646.210
for 2.07 x 2.00 m bay 1.96 m 6 ' - 5" 2.80 kg 6.16 lbs 20 2646.211
for 2.57 x 1.50 m bay 2.07 m 6' - 9' 2.90 kg 6.38 lbs 20 2646.213
8 for 2.07 x 1.50 m bay and 1.57 x 2.00 m bay 1.63 m 5' - 4" 2.40 kg 5.28 lbs 20 2646.214
for 1.57 x 1.50 m bay 1.23 m 4' - 0' 1.90 kg 4.18 lbs 20 2646.215
for 2.07 x 1.00 m bay 1.40 m 4' - 7' 2.10 kg 4.62 lbs 20 2646.216
for 1.57 x 1.00 m bay 0.96 m 3' - 2' 1.40 kg 3.08 lbs 20 2646.217
9 7 Bolt, D = 20 mm 1.60 kg 3.52 lbs 10 2646.220
8 Securing pin D = 4 mm 1.50 kg 3.30 lbs 50 5905.001
9 FM nut, D = 20 mm as counter nut for distortion lock while spanning
1.50 kg 3.30 lbs 10 2646.230
1
3
21
2
4
7 / 8
9
7 / 8
37
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
1 Pos. Description DimensionsL / H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 1 FW chord 1.57 m 5' - 2" 10.50 kg 23.10 lbs 20 2646.157
2.07 m 6' -9" 13.90 kg 30.58 lbs 20 2646.207
2.57 m 8' - 5" 17.40 kg 38.28 lbs 20 2646.257
2a 2b 3 2a FW post 1.00 m 3' - 3" 8.80 kg 19.36 lbs 28 2646.100
1.50 m 4' - 11" 11.60 kg 25.52 lbs 28 2646.150
2.00 m 6' - 6" 16.20 kg 35.64 lbs 28 2646.200
0.00 lbs
4 2b FM post, extended for accessible bridgings
2.50 m 8'- 2" 19.00 kg 41.80 lbs 28 2646.250
3 FM endfitting with turnbuckle 3.80 kg 8.36 lbs 100 2646.202
4 FM endfitting 1.00 kg 2.20 lbs 100 2646.203
5a 5b 6 5a FM post, single-side-connectionfor connection to the Allround Scaffolding in longitudinal direction
1.00 m 3' - 3" 6.40 kg 14.08 lbs 28 2646.105
1.50 m 4' - 11" 9.20 kg 20.24 lbs 28 2646.155
2.00 m 6' - 6" 13.80 kg 30.36 lbs 28 2646.205
5b FM post, single-side connection, extended 2.50 m 8'- 2" 16.60 kg 36.52 lbs 28 2646.255
7 6 FM diagonal rod
for 2.57 x 2.00 m bay 2.37 m 7' - 9' 3.30 kg 7.26 lbs 20 2646.210
for 2.07 x 2.00 m bay 1.96 m 6 ' - 5" 2.80 kg 6.16 lbs 20 2646.211
for 2.57 x 1.50 m bay 2.07 m 6' - 9' 2.90 kg 6.38 lbs 20 2646.213
8 for 2.07 x 1.50 m bay and 1.57 x 2.00 m bay 1.63 m 5' - 4" 2.40 kg 5.28 lbs 20 2646.214
for 1.57 x 1.50 m bay 1.23 m 4' - 0' 1.90 kg 4.18 lbs 20 2646.215
for 2.07 x 1.00 m bay 1.40 m 4' - 7' 2.10 kg 4.62 lbs 20 2646.216
for 1.57 x 1.00 m bay 0.96 m 3' - 2' 1.40 kg 3.08 lbs 20 2646.217
9 7 Bolt, D = 20 mm 1.60 kg 3.52 lbs 10 2646.220
8 Securing pin D = 4 mm 1.50 kg 3.30 lbs 50 5905.001
9 FM nut, D = 20 mm as counter nut for distortion lock while spanning
1.50 kg 3.30 lbs 10 2646.230
38
Bridging system
Bridging system Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 2 1 Post 3.22 m 10' - 7" 56.0 kg 123.20 lbs 18 2671.000
2 Chordfor 2.07 m bay length for 2.57 m bay length
1.97 m 6' - 6" 20.8 kg 45.76 lbs 45 2671.0102.47 m 8' - 1" 25.8 kg 56.76 lbs 45 2671.020
3 Diagonal rodfor 2.07 m bay length for 2.57 m bay length
3.05 m 10' - 0" 7.9 kg 17.38 lbs 100 2671.0303.37 m 11' - 1" 8.7 kg 19.14 lbs 100 2671.040
4 Diagonal anchoring, without nut
5.5 kg 12.10 lbs 2671.050
5 Diagonal anchoring, with nut
2.9 kg 6.38 lbs 2671.060
6 Bolt 30 mm dia.
8.0 kg 17.60 lbs 10 2671.071
Securing pin 4 mm dia.
1.5 kg 3.30 lbs 50 5905.001
4 5 6 7 Support element 4.8 kg 10.56 lbs 80 2671.080
8 Adapter for heavy-duty column 5.5 kg 12.10 lbs 124 2671.090
7 8 9 9 Support for double standard 4.9 kg 10.78 lbs 2671.140
10 Support beam for bridge width 1.57 m for bridge width 2.07 m for bridge width 2.57 m
119.2 kg 262.24 lbs 10 2671.095
145.8 kg 320.76 lbs 10 2671.100
167.0 kg 367.40 lbs 10 2671.105
10 11 Protect holder 1.0 kg 2.20 lbs 2671.110
12 Clamping nut for diagonal rod, WS 36 x 70, galvanized
4.0 kg 8.80 lbs 10 2671.121
11 12 13 13 Locking nut for diagonal rod, WS 36 x 70, galvanized
4.0 kg 8.80 lbs 20 2671.131
14 Wedge-head coupler, triple 2.3 5.06 lbs 2671.150
14 15 16 15 Open ended wrench WS 36 0.5 1.10 lbs 2671.135
16 Hexagon head bolt M12 x 35, with nut
5.0 11.00 lbs 50 2671.161
3
The Allround bridging system is the ideal complement to Layher Allround equipment. With just a few additional components, the load-bearing capacity of the proven Allround system can be increased enough to create, for example, wide-span footbridges or support structures for heavy loads.
The Allround bridging system is available in the familiar Layher dimensions of 2.07 m and 2.57 m, with its unique wedge-head connection making it fully compatible with Layher Allround equipment. Simple bolt connections enable the components of the bridging system to be connected up, resulting in quick and easy assembly.
When used as a support beam for a scaffolding structure, podium or roof structure, the Allround bridging system is connected to the structure above it by using Allround standards integrated into the top. Using the wedge-heads welded onto the sides, even suspended scaffolding structures can be connected, or several bridging units can be connected next to one another for a further increase in the load bearing capacity.
When a footbridge is built, the Allround bridging system is connected to Allround standards using the wedge-heads provided on the sides of the posts. Depending on application, either Event decks or steel decks can be used. The bridge can also be clad using Layher Protect cassettes and roofed. The bridge is mounted on Layher heavy-duty columns with specially designed support elements. These support elements permit pre-assembly on the ground and subsequent insertion by crane, which is a major advantage when spanning bridges across roads.
1
2
2
3
5
4
39
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Bridging system Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 2 1 Post 3.22 m 10' - 7" 56.0 kg 123.20 lbs 18 2671.000
2 Chordfor 2.07 m bay length for 2.57 m bay length
1.97 m 6' - 6" 20.8 kg 45.76 lbs 45 2671.0102.47 m 8' - 1" 25.8 kg 56.76 lbs 45 2671.020
3 Diagonal rodfor 2.07 m bay length for 2.57 m bay length
3.05 m 10' - 0" 7.9 kg 17.38 lbs 100 2671.0303.37 m 11' - 1" 8.7 kg 19.14 lbs 100 2671.040
4 Diagonal anchoring, without nut
5.5 kg 12.10 lbs 2671.050
5 Diagonal anchoring, with nut
2.9 kg 6.38 lbs 2671.060
6 Bolt 30 mm dia.
8.0 kg 17.60 lbs 10 2671.071
Securing pin 4 mm dia.
1.5 kg 3.30 lbs 50 5905.001
4 5 6 7 Support element 4.8 kg 10.56 lbs 80 2671.080
8 Adapter for heavy-duty column 5.5 kg 12.10 lbs 124 2671.090
7 8 9 9 Support for double standard 4.9 kg 10.78 lbs 2671.140
10 Support beam for bridge width 1.57 m for bridge width 2.07 m for bridge width 2.57 m
119.2 kg 262.24 lbs 10 2671.095
145.8 kg 320.76 lbs 10 2671.100
167.0 kg 367.40 lbs 10 2671.105
10 11 Protect holder 1.0 kg 2.20 lbs 2671.110
12 Clamping nut for diagonal rod, WS 36 x 70, galvanized
4.0 kg 8.80 lbs 10 2671.121
11 12 13 13 Locking nut for diagonal rod, WS 36 x 70, galvanized
4.0 kg 8.80 lbs 20 2671.131
14 Wedge-head coupler, triple 2.3 5.06 lbs 2671.150
14 15 16 15 Open ended wrench WS 36 0.5 1.10 lbs 2671.135
16 Hexagon head bolt M12 x 35, with nut
5.0 11.00 lbs 50 2671.161
40
STAR Frame
1 2 3a 3c
3b
4 5 6a 6c
6b
7 8
9 10
13 12
11
14 16
15
STAR Frame
Tube pallet 125(see page 58)
The great advantage of the STAR Frame is its unrestricted integration into the existing Allround module system.
That means:
2 Only one system for both façade and industrial scaffolding.
2 Rapid assembly and new possibilities for using the Allround equipment.
2 Use of the STAR Frame in conjunction with basic components of the Allround equipment.
Perfect compatibility with the Allround system
Revolutionary, the new guardrail attachment – rapid assembly without tools and increased safety thanks to rapid recognition of the closed state thanks to the red bar.
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHERL IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
41
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
STAR Frame
1 2 3a 3c
3b
4 5 6a 6c
6b
7 8
9 10
13 12
11
14 16
15
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial Si Imperial1 U-STAR frame
Standard frame 2.00 x 0.73 m2.00 x 0.73 m 6' - 6" x 2 ' - 5" 18.0 kg 39.60 lbs 22 2602.001
2 U-STAR frame LW Standard frame 2.00 x 1.09 m
2.00 x 1.09 m 6' - 6" x 3' - 7" 23.6 kg 51.92 lbs 13 2602.056
3 U-STAR frame LWa) Ajustment frame 0.50 x 0.73 mb) Ajustment frame 1.00 x 0.73 mc) Ajustment frame 1.50 x 0.73 m
0.50 x 0.73 m 1' - 7" x 2' - 5" 9.0 kg 19.80 lbs 22 2602.0501.00 x 0.73 m 3' - 3" x 2' - 5" 12.4 kg 27.28 lbs 22 2602.0511.50 x 0.73 m 4' - 11" x 2' - 5" 15.9 kg 34.98 lbs 22 2602.052
4 O-STAR frame Standard frame 2.00 x 0.73 m
2.00 x 0.73 m 6' - 6" x 2' - 5" 16.5 kg 36.30 lbs 22 2602.002
5 O-STAR frame LW Standard frame 2.00 x 1.09 m
2.00 x 1.09 m 6' - 6" x 3' - 7" 21.8 kg 47.96 lbs 13 2602.057
6 O-STAR frame LWa) Ajustment frame 0.50 x 0.73 mb) Ajustment frame 1.00 x 0.73 mc) Ajustment frame 1.50 x 0.73 m
0.50 x 0.73 m 1' - 7" x 2' - 5" 7.9 kg 17.38 lbs 22 2602.053
1.00 x 0.73 m 3' - 3" x 2' - 5" 11.3 kg 24.86 lbs 22 2602.0541.50 x 0.73 m 4' - 11" x 2' - 5" 14.8 kg 32.56 lbs 22 2602.055
7 STAR guardraillightweight guardrail made of 33.70 mm tube.Assembly without tools ensures rapid installation and removal.
0.73 m 2' - 5" 1.4 kg 3.08 lbs 140 2602.0051.09 m 3' - 7" 2.0 kg 4.40 lbs 140 2602.0061.40 m 4' - 7" 2.6 kg 5.72 lbs 140 2602.0071.57 m 5' - 2" 2.9 kg 6.38 lbs 140 2602.0082.07 m 6' - 9" 3.7 kg 8.14 lbs 140 2602.009
2.13 m 6' - 99" 3.8 kg 8.36 lbs 140 0728.0172.57 m 8' - 5" 4.5 kg 9.90 lbs 140 2602.0103.05 m 10'-01" 5.4 kg 11.88 lbs 140 0728.0183.07 m 10'-1" 5.5 kg 12.10 lbs 140 2602.011
8 Roof guard support for STAR frame
7.2 kg 15.84 lbs 20 2602.020
9 STAR double end guardrailclosure of the scaffolding at its end. This permits the use of internal guardrails up to the end.
0.73 m 0.73 m 2' - 5" 4.3 kg 9.46 lbs 80 2602.014
1.09 m 1.09 m 3' - 7" 5.6 kg 12.32 lbs 80 2602.018
10 STAR lift-off preventerThe welded-on toe board pin requires the use of the lift-off preventer before the toe boards as specified can be installed at the working levels,(only necessary for STAR U-frame)
0.73 m 0.73 m 2' - 5" 1.4 kg 3.08 lbs 150 2602.015
1.09 m 1.09 m 3' - 7" 2.1 kg 4.62 lbs 150 2602.017
11 STAR guardrail supporttop scaffolding closure of STAR type
1.00 m 3' - 3" 4.7 kg 10.34 lbs 50 2602.013
12 STAR internal guardrail fixing devicerapid tool-less assembly by swinging in the bar. for the connection of internal guardrails
0.3 kg 0.66 lbs 160 2602.012
13 STAR guardrail adaptor for lateral guardrail connection of STAR and Allround system
0.3 kg 0.66 lbs 100 2602.016
14 STAR pallet, without parts19 STAR frames (0.73 m wide) loading capacity with vertical storage and transport in the STAR pallet
1.20 x 0.91 m 3' - 11" x 3' - 0" 42.3 kg 93.06 lbs 10 5113.001
15 STAR transport safeguardprevents the STAR frames (0.73 m wide) from being pulled together on the truck when being secured. This ensures safe transportation. The top frame is secured with pins.
0.80 m 2' - 7" 2.4 kg 5.28 lbs 200 6309.001
16 STAR O-ledger with half-couplerend guardrail in prepositioned platform access bay
19 WS 0.73 m 2' - 5' 3.5 kg 7.7 lbs 200 2607.074
LAYHER
L IG H T W EIG HTLAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
42
Shoring TG 60
Heavy-duty column
An extremely high load-bearing capacity is achieved by combining four Allround standards. Specially developed top and base pieces, and heavy-duty spindles fitted into the latter, permit a multiplication of the individual load capacities of each standard.
These individual elements can then be expanded, with the aid of further Allround standard elements, into any spatial structures required.
Load-bearing capacities as single support, double support or tower, you can get upon request.
Heavy-duty column Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 3 2 1 Head jack for heavy-duty column 0.70 m 2' - 4" 30.9 kg 8.58 lbs 40 5312.004
2 Head part for heavy-duty column 0.21 m 8" 7.1 kg 16.96 lbs 40 5312.003
4 3 Base plate for heavy-duty column 0.70 m 2' - 4" 24.1 kg 53.02 lbs 40 5312.001
5 4 Base piece for heavy-duty column 0.40 m 1' - 4" 11.5 kg 25.30 lbs 40 5312.002
5 Single open-end wrench, WS 95 0.60 m 2' - 7" 7.0 kg 15.40 lbs 5312.005
Shoring TG 60 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 4 6 1 Shoring frame TG 60spacer frame; with spigot at the bottomsteel, hot-dip galvanized
0.50 x 1.09 m 1' - 7" x 3' - 7" 13.0 kg 28.6 lbs 21 2602.036
2 Shoring frame TG 60standard frame; with spigot at the bottomsteel, hot-dip galvanized
1.00 x 1.09 m 3' - 3" x 3' - 7" 17.7 kg 38.94 lbs 21 2602.035
2 5 3 Shoring frame TG 60base frame, without spigot;steel, hot-dip galvanized
0.71 x 1.09 m 2' - 4" x 3' - 7" 15.9 kg 34.98 lbs 21 2602.034
4 Spindle supportfor placement by crane or by castorssteel, hot-dip galvanized
0.8 kg 1.76 lbs 25 2602.033
5 Castor adapterwith 2 wedge-heads
6.4 kg 14.08 lbs 50 2602.040
3 7 6 Horing spigotfor use of the initial frame as tower head,spigot is secured with 2 hinged pins
1.1 kg 2.42 lbs 2602.032
7 Shoring frame palletfor use with 22 shoring frames each level,stackable, craneable, opitmized for truck beds
1.20 x 1.10 m 3' - 11" x 3' - 7" 53.7 kg 118.14 lbs 10 5113.003
8 8 Loading and stacking securing profilefor use at the stack head with upwards pointing spigots
1.20 m 3' - 11" 3.9 kg 8.58 lbs 50 5113.004
9 9 Loading and stacking securing profilefor use at the stacking head without upwards pointing spigots (e.g. for stacking of initial frames)
1.20 m 3' - 11" 3.4 kg 7.48 lbs 50 5113.005
10 11 10 Aluminium section beam with wood, with riveted-in wood section, with holes drilled for connection by means of beam connectors3.00 m long 3.00 m 9' - 9" 18.0 kg 39.6 lbs 4026.3004.00 m long 4.00 m 13' - 0" 24.0 kg 52.8 lbs 4026.400
11 Beam connector, 1.20 m 1.20 m 3' - 11" 6.6 kg 14.52 lbs 100 4026.000
12 Beam connector bolt, M12 x 70, with nut
0.7 kg 1.54 lbs 10 4026.002
Castorsee page 58
The Shoring TG 60 ensures a fast, flexible and safe assembly of shoring towers.
The heart of the TG 60 are the Shoring frames TG 60 with integrated rosettes. All frames are symmetrical parts, thus the orientation of the diagonal braces can be varied.The adaptation to the dimension of the formwork beams can be easily made by using different Allround ledgers and diagonal braces from 1.09 m to 3.07 m (see figure “bay length adaptation”).
Thanks to the perfect compatibility to Allround Scaffolding, the towers of the TG 60 can be adapted flexibly to any building condition.The shoring tower TG 60 can be assembled in horizontal position on the ground. Then the tower will be placed by crane. Otherwise it can be assembled in vertical position – optionally directly at the place of action or somewhere else, with placing it with its quickly mounted Castors.
The Allround Shoring TG 60 has an integrated advanced guardrail without any accessories for assembly in vertical position. For the Allround Shoring TG 60, only solid base plates (see page 10) may be used.
W =
1.0
9 m
L = 1,09 – 3,07 m
Bay length adaptation with Allround serial ledgers from 1.09 m to 3.07 m.
iFurther information about the Allround Shoring TG 60 can be found in the product video: qrtg60en.layher.com
43
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Heavy-duty column Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 3 2 1 Head jack for heavy-duty column 0.70 m 2' - 4" 30.9 kg 8.58 lbs 40 5312.004
2 Head part for heavy-duty column 0.21 m 8" 7.1 kg 16.96 lbs 40 5312.003
4 3 Base plate for heavy-duty column 0.70 m 2' - 4" 24.1 kg 53.02 lbs 40 5312.001
5 4 Base piece for heavy-duty column 0.40 m 1' - 4" 11.5 kg 25.30 lbs 40 5312.002
5 Single open-end wrench, WS 95 0.60 m 2' - 7" 7.0 kg 15.40 lbs 5312.005
Shoring TG 60 Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 4 6 1 Shoring frame TG 60spacer frame; with spigot at the bottomsteel, hot-dip galvanized
0.50 x 1.09 m 1' - 7" x 3' - 7" 13.0 kg 28.6 lbs 21 2602.036
2 Shoring frame TG 60standard frame; with spigot at the bottomsteel, hot-dip galvanized
1.00 x 1.09 m 3' - 3" x 3' - 7" 17.7 kg 38.94 lbs 21 2602.035
2 5 3 Shoring frame TG 60base frame, without spigot;steel, hot-dip galvanized
0.71 x 1.09 m 2' - 4" x 3' - 7" 15.9 kg 34.98 lbs 21 2602.034
4 Spindle supportfor placement by crane or by castorssteel, hot-dip galvanized
0.8 kg 1.76 lbs 25 2602.033
5 Castor adapterwith 2 wedge-heads
6.4 kg 14.08 lbs 50 2602.040
3 7 6 Horing spigotfor use of the initial frame as tower head,spigot is secured with 2 hinged pins
1.1 kg 2.42 lbs 2602.032
7 Shoring frame palletfor use with 22 shoring frames each level,stackable, craneable, opitmized for truck beds
1.20 x 1.10 m 3' - 11" x 3' - 7" 53.7 kg 118.14 lbs 10 5113.003
8 8 Loading and stacking securing profilefor use at the stack head with upwards pointing spigots
1.20 m 3' - 11" 3.9 kg 8.58 lbs 50 5113.004
9 9 Loading and stacking securing profilefor use at the stacking head without upwards pointing spigots (e.g. for stacking of initial frames)
1.20 m 3' - 11" 3.4 kg 7.48 lbs 50 5113.005
10 11 10 Aluminium section beam with wood, with riveted-in wood section, with holes drilled for connection by means of beam connectors3.00 m long 3.00 m 9' - 9" 18.0 kg 39.6 lbs 4026.3004.00 m long 4.00 m 13' - 0" 24.0 kg 52.8 lbs 4026.400
11 Beam connector, 1.20 m 1.20 m 3' - 11" 6.6 kg 14.52 lbs 100 4026.000
12 Beam connector bolt, M12 x 70, with nut
0.7 kg 1.54 lbs 10 4026.002
44
Modular Stairtower
Hollow wall bracket Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial5 6 5 Hollow wall bracket adaptor
steel, hot-dip galvanized2.3 kg 5.06 lbs 2602.400
6 Half-coupler with platefor supporting the scaffolding structure against the wall
19 WS 0.12 x 0.12 m 5" x 5" 1.5 kg 3.3 lbs 250 4705.019
Compact stairtower Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 U-stair, 1.25 x 0.60 m, steel for 1.57 m bay, step height 0.25 m
1.25 x 0.6 m 4' - 1" x 2' - 0" 32.5 kg 71.50 lbs 8 2636.125
2 U-ledger with bearer, 1.40 m for compensating 25 cm, see detailed sketch on left
1.40 m 4' - 7" 9.0 kg 19.80 lbs 50 2618.141
3 Gap cover, 0.79 m 0.79 m 2' - 7" 3.4 kg 7.48 lbs 50 2636.078
2 3 4 4 Adaptor plate, steelWhen placing the compact stair tower onto this adaptor plate, it is easily possible to lay the screed
0.15 x 0.15 x 0.20 m 6" x 6" x 8" 1.3 kg 2.86 lbs 20 2636.124
Compact stairtower
Hollow wall bracket
In its standard version, the compact stairtower conforms to German regulations on “stairways for building work” and fits into many stairway recesses in buildings to house one or more families. The stairway can be integrated into Allround work scaffolding. The use of standard parts means that only a few additional parts are needed.
Surface area without brackets 1.57 x 1.40 m.Exit clearances: 2.50 or 2.75 or 3.00 m possible.
The hollow wall bracket allows concreting work on prefabricated element walls. Forget about time-consuming timber structures – simply suspend the bracket from the top of the wall and lay system decks on it – that’s all.
Layher has now further optimized the use of the All-round system as a scaffolding stairtower – assembled from standard scaffolding components and prefabrica-ted stairways with integrated platforms.
Thanks to a newly developed 2.21 m long vertical Allround standard, this tower can now be preassem-bled as required, on the ground and section by section, before being moved by crane to form a tower with unidirectional or alternating stairways. Construction companies benefit in this way from an even easier, faster and above all safer assembly and modification, and from an increased height clearance of 2.20 m that makes its use even more convenient.
The advantages over expensive one-off structures or ad-hoc solutions made of timber are persuasive: rapid and economical assembly, optimum conditions for construction workers thanks to a high degree of safety during use, and exact matching to existing conditions.
For securing of every floor, hinged pins are used (see page 12).
ADDITIONAL EQUIPMENT FOR END MODULE (O-VERSION)
40 mm
40 mm
40 mm
40 mm
10 mm
10 mm
iFurther information about the Allround Modular Stairtower can be found in the product video:qrmten.layher.com
Description PU[pcs.]
Ref. No.
Internal stairway guardrail 1.50 m* 1 1752.012Standard LW 1.00 m 4 2617.100O-ledger LW 1.40 m 4 2601.140O-ledger LW 2.57 m 4 2601.257Guardrail post 1.30 m 1 2638.400O-ledger 1.90 m with wedge-head and U-fork 2 2638.401O-steel deck T9 2.57 x 0.32 m 2 3862.257
* only for alternating assembly
STAIRWAY MODULE, UNIDIRECTIONAL (O-VERSION)
Description PU[pcs.]
Ref. No.
O-comfort stairway 2.57 x 0.65 m 1 2635.257Stairwell guardrail 1 1752.004Internal stairway guardrail 1 1752.007Initial standard 2.21 m 4 2617.221O-ledger LW 1.40 m 8 2601.140O-ledger LW 2.57 m 8 2601.257Diagonal brace 1.40 x 2.00 m 2 2620.140Diagonal brace 2.57 x 2.00 2 2620.257O-steel deck T9 2.57 x 0.32 m 2 3862.257
ADDITIONAL EQUIPMENT FOR END MODULE (O-VERSION)
45
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Hollow wall bracket Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial5 6 5 Hollow wall bracket adaptor
steel, hot-dip galvanized2.3 kg 5.06 lbs 2602.400
6 Half-coupler with platefor supporting the scaffolding structure against the wall
19 WS 0.12 x 0.12 m 5" x 5" 1.5 kg 3.3 lbs 250 4705.019
Compact stairtower Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 1 U-stair, 1.25 x 0.60 m, steel for 1.57 m bay, step height 0.25 m
1.25 x 0.6 m 4' - 1" x 2' - 0" 32.5 kg 71.50 lbs 8 2636.125
2 U-ledger with bearer, 1.40 m for compensating 25 cm, see detailed sketch on left
1.40 m 4' - 7" 9.0 kg 19.80 lbs 50 2618.141
3 Gap cover, 0.79 m 0.79 m 2' - 7" 3.4 kg 7.48 lbs 50 2636.078
2 3 4 4 Adaptor plate, steelWhen placing the compact stair tower onto this adaptor plate, it is easily possible to lay the screed
0.15 x 0.15 x 0.20 m 6" x 6" x 8" 1.3 kg 2.86 lbs 20 2636.124
ADDITIONAL EQUIPMENT FOR END MODULE (O-VERSION) ALTERNATING VERSIONDescription PU
[pcs.]Ref. No.
O-comfort stairway 2.57 x 0.64 m 1 2635.257Internal stairway guardrail 19 WS 1 1752.007Initial standard LW 2.21 m 4 2617.221O-ledger LW 1.40 m 6 2601.140O-ledger LW 2.57 m 9 2601.257Diagonal brace 1.40 x 2.00 m 2 2620.140Diagonal brace 2.57 x 2.00 m 2 2620.257
Description PU[pcs.]
Ref. No.
Base plate 60 4 4001.060Spindle support 4 2602.033
STAIRWAY MODULE, ALTERNATING (O-VERSION)
BASEBASE
End module
Stairway module
Stairway module
Stairway module
Stairway module with less side protection
Base module
46
Fall protection
2 1 4
3
Fall protection
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 Advance guardrail post, aluminium for advance guardrail (1.00 m height);fast guardrail assembly with a tilting pin
4.2 kg 9.24 lbs 50 4031.001
2 Advance guardrail post, aluminium for two advance guardrails (0.50 m and 1.00 m height);fast guardrail assembly with a tilting pin
4.3 kg 9.46 lbs 50 4031.002
3 Advance guardrail, 1.57 / 2.07 m, aluminium
Advance guardrail, 2.57 / 3.07 m, aluminium
1.70 m 5' - 7" 3.2 kg 7.04 lbs 50 4031.207
2.30 m 7' - 6" 4.0 kg 8.80 lbs 50 4031.307
4 Advance guardrail system (AGS)for scaffolding endAluminium, single-part
2.20 x 0.70 m 7' - 3" x 2' - 4" 9.8 kg 21.56 lbs 6 4031.000
Preventing falls during assembly, modification or dismantling of the scaffoldingIn line with local regulations or as the result of a risk analysis performed by the scaffolding erector, personal protection equipment (PPE), an advance guardrail or a combination of the two may be necessary for assembly, modification or dismantling of the scaffolding.
The Layher advance guardrail system (AGS) consists of two basic components – advance guardrail post and adavance telescopic guardrail. The advance guardrail post must be used depending on local regulations.
The advance guardrail post 1/2, the advance telescopic guardrail 1.57/2.07 m, the advance tele- scopic guardrail 2.57/3.07 m 3, and the End-AGS 4 are used for temporary protection against falls during assembly of scaffolding parts on the uppermost, unsecured scaffolding level.
Extension lengthsArticle L min. L max.Advance guardrail 1.57/2.07 m 1.57 m 2.90 mAdvance guardrail 2.57/3.07 m 2.20 m 3.70 m
The advance guardrail system (AGS) can be used for the access bay or over several bays.
The instructions for assembly and use of the Allround Scaffolding System must be complied with.
The end-AGS is used by placing the bottom U-section on the lower guardrail. The upper U-section must been pulled down to fit into place under the deck ledger. By letting go the end-AGS will be secured.
Detail of assembly of the AGS in the access bay
47
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Safety gear
Safety gear
1 3
2
According to German DGUV 38 regulations, equipment to prevent falls by personnel must be provided for work areas and walkways where the height of the fall is more than 2.00 m.
The PSA safety harness AX 60 C has impressive features:
2 Comfortable, padded and ergonomic back support2 Convenient tool holders and click-locks for easy
fastening2 High operational dependability and absolute freedom
from maintenance, plus very simple fastening2 Operating errors are not possible, as the equipment
operates in any position2 Excellent running even under gruelling working
conditions2 Enormous distribution of forces in the event of a fall.
Before use, visual checks must be performed regularly to ensure correct working order. In accordance with German BGR 198 regulations, all personal safety equipment must be inspected at least once a year by an expert. The maximum permissible period of use for the equipment must not be exceeded.
Pos. Description DimensionsL/H x W
Weight approx. Ref. No.
SI Imperial SI Imperial1 PSA safety harness AX 60 C with extension 0.50 m
conforms to EN 3611.8 kg 3.96 lbs 5969.160
2 PSA-Flex safety rope, 2.00 mwith fall arrester and snap hook FS 90, as per EN 354/EN 355self-shortening to reduce tripping hazards
2.00 m 6' - 6" 1.1 kg 2.42 lbs 5969.501
3 PSA Scaffolding construction setPos. 1 and 3Safety harness, safety rope 2.00 m, backpack(use exclusively for scaffolding construction)
3.5 kg 7.70 lbs 5969.170
48
Parts for mobile scaffolds
Tube palletsin square shape (85) 5 or in rectangular shape (125) 4. The pallets are open on all sides. Tubes, standards, guardrails, diagonal braces, toe boards are transported and stored with this pallet. The empty pallets, stored permanently in the base frame using pallet posts, can be transported and stored in a space-saving way.
Tube pallet 125 4 Following can be transported: 80 standards or 99 toe boards or 155 ledgers or 28 steel decks 0.32 m.
Modular pallet and skeleton box 6/7 The palette or the skeleton box can be stacked with Euro pallets. Crane eyelets at top; an opening allows stacked material to be removed even if several pallets are stacked one above the other. The integrated timber base plate is 30 mm thick and it’s nailed onto 50 x 50 mm square timbers.
Castors The mobile solution for birdcage, bridge or suspended scaffolding is often the best alternative in terms of technical suitability, scheduling and price. In this field too, the choice, the delivery capability and not least the experience of the manufacturer point to Layher. If scaffolding is made mobile using castors, DIN 4420-3 applies. For these rolling towers, verification of structural strength is required.
Robust castors with twin brake (it brakes wheel and slewing ring) for various loads, offer a safer mobility of the scaffolding – without high effort.
80 cm
120 cm71 cm 71 cm
80 cm
80 cm
iMore pallets you’ll find in the catalogue System-free Accessories.
Railing clamp
Railing clamp
8
Scaffolding pallets Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
4 5 4 Tube pallet 125 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
1.37 x 0.97 m 4' - 6" x 3' - 2"
32.0 kg 70.4 lbs 10 5105.125
5 Tube pallet 85 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
0.97 x 0.97 m 3' - 2" x 3' - 2"
30.8 kg 67.76 lbs 10 5105.085
Mesh box insertSteel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
22.0 kg 48.40 lbs 10 5104.086
7 6 6 Modular palletSteel, hot-dip galvanized, fill height 0.74 m, load 2.000 kg, external dimensions 1.26 x 0.86 m
1.26 x 0.86 m 4' - 2" x 2' - 10"
45.0 kg 99.00 lbs 5 5101.061
7 Modular skeleton boxSteel, hot-dip galvanized, fill height at front 0.53 m, fill height at rear 0.74 m,load 2.000 kg, external dimensions 1.26 x 0.86 m consisting of 5113.000 modular skeleton box and 6494.514 timber base plate
1.26 x 0.86 m 4' - 2" x 2' - 10"
85.8 kg 188.76 kg 5113.002
Parts for mobile scaffolds Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 2 3 1 Castor 1000Plastic wheel, dia. 200 mm. With base plate, adjustment range 0.30 – 0.60 m, spindle nut with lock, with twin brake lever and load centering when braked. Wheel and slewing ring can be locked.
dia. 0.20 dia. 8' 6.3 kg 13.86 lbs 70 5219.201
2 Double flange castor, 75 mmSecured by top plate, hole pattern 170 x 170 mm, dia. 18 mm, external dia. 285 mm, internal dia. 242 mm,without brake.
dia. 0.285 dia. 11" 28.0 kg 61.60 lbs 40 5216.075
3 Flange castor for 48.30 mm tubeSecured by top plate, outer hole pattern 170 x 170 mm, dia. 18 mm, inner hole pattern 126 x 126 x 13 mm (slot hole 13 x 28 mm) without brake. Permissible load 31 kN
dia. 0.23 dia. 9" 16.8 kg 36.96 lbs 40 5221.048
Scaffolding pallets
80 cm
120 cm71 cm 71 cm
80 cm
80 cm
When attached to floors, toe boards must be provided, and the vertical stile must be attached over the spindle.
When attached to fascias, no toe boards are required, and the vertical stile must be attached over the spigot.
Railing clampAccording to German regulations DGUV 38 relating to con-struction work, a fall protection system must be provided for work areas and walkways on roofs and intermediate levels where the height of the fall is more than 2.00 m. The Layher railing clamp meets these requirements for securing of concrete floors and fascias of 16 – 33 cm height and of flat roofs.
The back guard must be made in accordance with applicable regulations from tube/coupler, modular or frame scaffolding. The bay widths can be freely selected, max. 3.07 m long.
49
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Railing clamp
8
Scaffolding pallets Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
4 5 4 Tube pallet 125 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
1.37 x 0.97 m 4' - 6" x 3' - 2"
32.0 kg 70.4 lbs 10 5105.125
5 Tube pallet 85 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
0.97 x 0.97 m 3' - 2" x 3' - 2"
30.8 kg 67.76 lbs 10 5105.085
Mesh box insertSteel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1.500 kg
22.0 kg 48.40 lbs 10 5104.086
7 6 6 Modular palletSteel, hot-dip galvanized, fill height 0.74 m, load 2.000 kg, external dimensions 1.26 x 0.86 m
1.26 x 0.86 m 4' - 2" x 2' - 10"
45.0 kg 99.00 lbs 5 5101.061
7 Modular skeleton boxSteel, hot-dip galvanized, fill height at front 0.53 m, fill height at rear 0.74 m,load 2.000 kg, external dimensions 1.26 x 0.86 m consisting of 5113.000 modular skeleton box and 6494.514 timber base plate
1.26 x 0.86 m 4' - 2" x 2' - 10"
85.8 kg 188.76 kg 5113.002
Parts for mobile scaffolds Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial
1 2 3 1 Castor 1000Plastic wheel, dia. 200 mm. With base plate, adjustment range 0.30 – 0.60 m, spindle nut with lock, with twin brake lever and load centering when braked. Wheel and slewing ring can be locked.
dia. 0.20 dia. 8' 6.3 kg 13.86 lbs 70 5219.201
2 Double flange castor, 75 mmSecured by top plate, hole pattern 170 x 170 mm, dia. 18 mm, external dia. 285 mm, internal dia. 242 mm,without brake.
dia. 0.285 dia. 11" 28.0 kg 61.60 lbs 40 5216.075
3 Flange castor for 48.30 mm tubeSecured by top plate, outer hole pattern 170 x 170 mm, dia. 18 mm, inner hole pattern 126 x 126 x 13 mm (slot hole 13 x 28 mm) without brake. Permissible load 31 kN
dia. 0.23 dia. 9" 16.8 kg 36.96 lbs 40 5221.048
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial8 Railing clamp 0.58 m 1' - 11" 7.0 kg 15.40 lbs 50 4015.100
Example for use of the railing clamp on fascia: Example for use of the railing clamp on floor slab:
50
Identification and prohibition signs for work scaffolding as per DIN EN 12811-1. Suitable see-through pocket 6 made of transparent plastic for weather protection.
The three-piece scaffolding identification pad 3 with carbon copy developed to tag work scaffolding. The right part is the inspection record for your files. Your client gets the carbon. On the back side of the carbon, important application notes are listed.
Pos. Description DimensionsL/H x W
Weight approx. PU[pcs.]
Ref. No.
SI Imperial SI Imperial1 Ratchet spanner
with reinforced head19 WS 0.32 m 1' - 1" 0.7 kg 1.54 lbs 4740.019
22 WS 0.32 m 1' - 1" 0.7 kg 1.54 lbs 4740.022
2 Magnetic spirit level 0.4 kg 0.88 lbs 4006.666
3 Scaffolding identification padPad with 50 + 50 pieces (Original + Carbon) with centre perforation and foldover as carbon-block
DIN A4 0.5 kg 1.10 lbs 6344.500
4 Scabbling pick, 600 g, with steel tube handleand rubber safety grip
0.32 m 1' - 1" 0.9 kg 1.98 lbs 4421.050
5 Prohibition sign 0.18 x 0.14 m 7" x 6" 0.2 kg 0.44 lbs 20 6344.201
6 See-through pocketfor Ref. No. 6344.200/400 and 500
0.24 x 0.16 m 9" x 6" 0.1 kg 0.22 lbs 10 6344.001
Tools
Tools
1 2
4 3
5 6
Kennzeichnung und Freigabe Prüfprotokollfür Gerüste DIN EN 12811/ DIN 4420 nach §10/ §11 BetrSichV
Gerüstersteller:(ggf. mit Stempel)
Erstellungsort:
Gerüstart:
Nutzungsbeschränkungen (Hinweise für den Nutzer siehe Rückseite) :____________________________________________________________________________________________________________________________
Bemerkungen, Hinweise:__________________________________________________________________________________________________________________________
Regelausführung Typenprüfung AuV Einzelnachweis/Montageplan
Bekleidung:
Lastklasse:
Breitenklasse:
Die Summe der Verkehrslasten aller übereinanderliegenden Gerüstlagen in einem Gerüstfeld darf den vorgenannten Wert nicht überschreiten.
Auftraggeber:
befähigte Person beim Aufbau:
Aufbauzeitraum:
befähigte Person zur Prüfung:
Prüfungszeitraum:Telefonnummer:
Gerüst-Nr.:
Gerüstbauteile augenscheinlich unbeschädigt Maße – Belagbohlen, Rohrwanddicke Kennzeichnung – Rohre, Kupplungen, Bauteile
Standsicherheit Tragfähigkeit des Untergrunds Fußspindeln – Auszugslänge, Auflagerung Verstrebungen/Diagonalen (mindestens 1 pro 5 Felder in jeder Achse), Längsriegel Gitterträger – Druckgurtaussteifung, Auflagerung Verankerungen – Anzahl, Ankergrund, Ankerraster, Abstand, Prüfung
Beläge Gerüstlagen – voll ausgelegt oder Horizontalaussteifung Gerüstbohlen – Querschnitt, Auflagerung Abhubsicherung – bei auftretenden Abhubkräften Eckausbildung – in voller Breite, Seitenschutz
Arbeits und dreiteiliger Seitenschutz – Stirnseitenschutz Betriebs- Öffnungen – Spalte geschlossen, volle Breitenklasse sicherheit Aufstiege, Zugänge – Anzahl, Eignung, Höhe (Leitern < 5 m), Verkehrssicherung – Beleuchtung, Absperrung Konsolen, Auskragungen – Abstrebung, Verankerung freistehende Türme – Breite zu Höhe, Ballast Abstand Bauwerk und Belag – innenliegender Seitenschutz Schutzwand im Dachfanggerüst
Fahrgerüste Fahrrollen, Belastung, Untergrund, Ballast, Verbreiterung
Kennzeichnung nicht fertiger Bereich abgegrenzt und gekennzeichnet Kennzeichnungsschild an den Zugängen
Keine Planen Netze _______________
Arbeitsgerüst nach EN 12811 Fassadengerüst Raumgerüst Schutzdach Schutzgerüst nach DIN 4420 Fanggerüst Dachfanggerüst Sondergerüst: __________ Treppenturm Fahrgerüst
2 (150 kg/m²) 3 (200 kg/m²) 4 (300 kg/m²) ___ (______kg/m²)
W06 W09 W_____ SW_____
Telefonnummer:
6344
.500
09
/201
0
Konstruktion:
Geprüft und freigegebenbefähigte Person des Gerüsterstellers:
Datum, Unterschrift Datum, Unterschrift
befähigte Person des Nutzers:
Eigenmächtige Änderungen am Gerüst sind ohne vorige Rücksprache mit dem Gerüstersteller untersagt! Die Anweisungen der Aufbau- und Verwendungsanleitung sind sorgfältig zu befolgen!
Wilhelm Layher GmbH & Co. KGGerüste Tribünen LeiternOchsenbacher Straße 56D-74363 Güglingen-Eibensbach
Gerüst-Nr.: ____________________________
Geprüft und freigegebenbefähigte Person des Gerüsterstellers:
Datum, Unterschrift Datum, Unterschrift
befähigte Person des Nutzers:
Ja Nein nicht zu-treffend
In Ordnung?
Zutritt verbotenWilhelm Layher GmbH & Co. KGGerüste Tribünen Leitern Ochsenbacher Straße 56D-74363 Güglingen-Eibensbach
Postfach 40D-74361 Güglingen-EibensbachTelefon (0 71 35) 70-0Telefax (0 71 35) 70-2 65E-Mail: [email protected]
also see download.layher.com
51
WS = wrench size PU = packaging unit UR = Upon Request = Layher Individual possible IND
Software for scaffolding construction
Pos. Description
1 LayPLAN CLASSIC scaffolding configurator for SpeedyScaf, Allround Scaffolding,weather protection roofs and rolling towers
2 LayPLAN CAD plug-in for AutoCAD, for designing complex scaffolding in 3D and for developing scaffolding proposals from LayPLAN CLASSIC
3 LayPLAN CAD OEM AutoCAD 2017 OEM with LayPLAN CAD plug-in for designing complex scaffolding in 3D, incl. 3D PDF exporter, and for developing scaffolding proposals from LayPLAN CLASSIC
How can I acquire LayPLAN?Registration and all the ordering processes can be conveniently accessed at the Layher website: http: / / software.layher.comA contact form gives you the data to access our soft-ware portal, where you can download a 30-day test version and also find the order form for the full version.The individual software packages can be licensed for a validity of 1 year from our sales partner Mensch und Maschine Deutschland GmbH, which also handles the entire sales process and provides continuous hotline support for these packages.
Layher LayPLAN 1Time and material are crucial factors in scaffolding construction. To make the most efficient use of both, the Layher range includes the practical LayPLAN scaffolding planning software.
With the serveral software packages LayPLAN CLASSIC and LayPLAN CAD, it is possible to plan scaffolding structures from simple, small facade scaffolding up to complex industrial scaffolding or protective roofs and grandstands.
LayPLAN CLASSIC 2With the LayPLAN CLASSIC modules for Allround Scaffolding and SpeedyScaf, individualised scaffolding solutions can be configured quickly and easily: whether they’re for circular or facade scaffolding made from SpeedyScaf, for birdcage scaffolding and free-standing towers made from Allround Scaffolding, or for structures with temporary roofs. Once the dimensions and the required assembly variant have been entered, LayPLAN CLASSIC delivers within seconds a scaffolding proposal, including anchoring, bracing and side protection. During the design phase, the overall length, standing heights and areas are continuously calculated and displayed to reflect the current plan. A materials list can also be created at the click of a button and then printed out, together with an assembly sketch for the area to be enclosed in scaffolding plus the total weight. This also helps with the logistics – the required material is guaranteed to be there where it's needed. Scaffolding erectors benefit from more certainty when planning the commercial and technical details, from optimised use of stocks, and from full cost transparency at every stage of the project.
After finalisation of the scaffolding proposal, the LayPLAN Material Manager provides you with complete lists of requi-red parts to ensure you always have precisely the material you need at the site.
LayPLAN CAD 3For more complex structures, LayPLAN CAD is available. This is a plug-in for Autodesk AutoCAD. It enables 3-dimensional planning of scaffolding structures of all types.
Thanks to integration into the LayPLAN system, the basic planning can be handled in automated form using the proven LayPLAN CLASSIC. Project data can be quickly recorded using input masks, ensuring a time saving for every order. The data are then simply exported into the AutoCAD program, which offers further possibilities for detailed 3D planning. A visual collision check is possible with the aid of volume rendering. Using a convenient search function with preview image, scaffolding planners will find not only an extensive library of individual Layher parts, but also assemblies already prefabricated for even faster design work. The detailed drawings can then be printed out. It is possible to export them as 3D PDFs too (3D PDF exporter only included with LayPLAN CAD OEM version), which brings benefits in the tender phase and also facilitates later assembly. A transfer to visualisation or animation software is also possible without any problem. This allows projects not only to be planned economically and also adapted precisely to actual requirements, but also to be presented professionally to customers.
Allround Birdcage Scaffolding
Allround Circular Scaffolding LayPLAN Material ManagerPart of LayPLAN CLASSIC and LayPLAN CAD
Allround Facade Scaffolding
Planning of individualised scaffolding structures in LayPLAN CAD
Creation of planning documents with integral material lists in LayPLAN CAD
Generation of 3D PDFs with the aid of 3D PDF exporters
3D-PDF view(Platform independent with standard PDF-Reader)
The license is extended by a further year if a subscription model is selected, unlessit is terminated with two months notice to the end of the contractual year.
Ref.
No.
811
6.25
3 Ed
ition
06.
2017
Proximity to the customer is a central factor behind Layher’s success – geographically speak-ing too. Wherever our customers need us, we will be there – with our advice, assistance and solutions.
Layher is your dependable partner with more than 70 years of experience. ”Made by Layher“ always means ”Made in Germany“ too – and that goes for the entire product range. Superb quality – and all from one source.
Headquarters in Eibensbach
Plant 2 in Gueglingen
SpeedyScaf
Allround Scaffolding
System-free Accessories
Protective Systems
Shoring
Layher USACentral & West Region8225 Hansen RoadHouston, TX 77075 tel: 866.300.0904fax 713.947.1441
Southeast Region4814 SW 60th AvenueOcala, FL 34474tel: 352.286.3087fax: 407.386.8112
Layher CanadaWest Region6207 39th StreetLeduc, AB T9E 0Z3tel: 866.300.0904tel: 780.986.9633
Contact us viaemail: [email protected]: www.layherusa.comtoll free: (+1) 866.300.0904
Northeast Region7517-7521 Lake DriveBaltimore, MD 21237tel: 410.686.6482fax: 410.686.6483
South Region8495 Moffett RoadSemmes, AL 36575tel: 251.649.7696fax: 251.649.7793
East Region110 Rutherford Rd SBrampton, ON L6W3J5tel: 416.660.0640fax: 647.362.5600
Layher International
Subsidiaries:Argentina, Australia, Austria,
Belgium,Brazil, Bulgaria, Canada, Chile, Columbia, Denmark, Ecuador, France, Greece, Hungary, India, Italy, Kazachstan, Lithuania, Mexico, Morocco, New Zealand, Norway, Peru, Poland, Romania, Russia, Serbia, Singapore, South Africa, Spain, Sweden, Switzerland,The Netherlands, Turkey, United Arab Emirates, United Kingdom, USA and Layher Bautechnik in Germany.
Representatives:Bahrain, Croatia, Czech Republic, Estonia,
Finland, Hong Kong, Iceland, Japan, Kuwait, Latvija, Lebanon, Luxembourg, Libya, Saudi-Arabia, Slovak ,Republic, Slovenia, Ukraine, and further part-ners around the world.