Download pdf - KINGWELL OILFIELD DST - TradeKeyimg.tradekey.com/images/uploadedimages/brochures/5/3/6864052... · Drill Stem Test n RTTS Packer n The RTTS packer is a full-opening, hookwall packer

KINGWELL OILFIELD DST


GEOGRAPHICAL SPREAD & CONTACTS

Canada Libya Iraq

Yemen Iran

QatarUAE MainOffices

India

Oman Saudi Arabia

U.A.E

Egypt

TanzaniaBangladeshKuwait

Malaysia

Russia

PRODUCE&SERVICES PROVIDED

hOIL & GAS PRODUCTION/EXPLORATION WELL TESTING

hPRODUCED WATER TREATMENT

hINTEGRATED WELL SERVICES

hDRILL STEM TESTING

hPROCESS ENGINEERING AND DESIGN

hPVT and CORE ANALYSIS

EQUIPMENT

Test SeparatorOffshore Burner BoomOnshore Burner BoomGreen Burner HeadChoke ManifoldOil / Gas Manifold ESD PanelSafety ValveHeaterFlexible HoseLab CabinSCADAElectronic Data AcquisitionLoading GantryCrude Oil Storage TankOil Re-Injection PumpMobile well Test Packages

Surge TankPressure TankVertical Flare StackWater Treatment UnitHT 400 TRIPLEX PUMPMulti-Stage PumpPressure Test SystemAir compressor and GeneratorAcid Neutralization UnitChemical Injection PumpDuplex Cartridge Filter UnitHydro cyclone and AccumulatorSkid Strainer Package Sand Monitoring SystemSurface Test TreeTransfer PumpAcid Pumping Unit

SURFACE TEST TREE10k and 15k

Surface Test Tree Complete with the following;

Master Valve

Kill Valve

Crown Valve

Wing Valve: hydraulic operated

Swivel assembly

Certified for sour service

Connections

Existing 5”- 4 Stub ACME - 2G Box on top of Flow Head

Stiff Joint top 4-1/2” EUE Pin (available)

Crossover 4-1/2” CS Hydril Pin top (available)

Crossover 3-1/2” PH-6 Hydril Pin top (available)

Emergency Shut Down Valve

3” X 5K , 10k and 15k Hydraulic valve Certified for Sour Service

SAFETY VALVE

ESD PANEL

HYDRAULIC & PNEUMATIC

Equipped with remote shut downstations enabling complete shutdown of the well in an emergency

CHOKE MANIFOLD

3” X 5K, and 10K, and 15 K Choke ManifoldsEquipped with Adjustable and Positive Chokes

Designed with four gate valvesCertified for Sour Service

OIL AND GAS MANIFOLD

3” X 5 Way Oil Manifold (1500 PSI WP)

3” x 3 Way Gas Manifold (1500 PSI WP)

NACE - MR-01-75

TEST SEPARATOR

Three Phase Test Separator

2160 PSI, 1440 PSI, 720 PSI

Equipped with Safety Relief Valves and Necessary Instrumentation

Certified for Sour ServiceNACE MR-01-75 ASME

HEATER

2MM BTU/Hr and 4MM BTU/Hr . Line Heater Diesel / Gas Fired

3” X 5K


HEAT EXCHANGER 5 MM BTU/HR.

Heat Exchanger

5MM BTU/hr

3” x 10K

With adjustable choke & steam generator

BURNER BOOM

Offshore Burner Booms

60’ and 90’ lengths

Equipped with Electronicignition.

Equipped with Green Burner Heads, each capable of handling 5000 bbls/d

ONSHORE BURNER BOOMS

Available on 15’ skids

Complete with GreenBurner Heads for clean and efficient burning

Electronic ignition andcontinuous pilot



STEAM GENERATOR

The CLAYTON Steam Generator is manufactured in conformance

with the American Society of Mechanical Engineering (ASME) Power Boiler Code, Section I

Manufactured by : CLAYTON INDUSTRIES

Model No. E-200 Steam Heat Generator

HP FLEXIBLE HOSE

· ID = 3” (76.20 mm) · OD = 5.65” (143.50 mm) · Minimum bending radius

- for storage 0.88 m - in service 1.32 m

· Weight (in air empty) = 49 kg/m · Working Pressure = 10,000 psi · Test Pressure = 15,000 psi · Working Temperature = -20oC/+100oC · Bureau Veritas witnessed and certified

24 hours pressure test · Lifting/Handling collar at each end

Length = 60 feet (-0/+2 feet)


LAB CABIN

Skid Mounted Lab

Onshore & Offshore Operations

Equipped with NecessaryAccessories and Instrumentation forWell Testing Services

Zone IZone II



CRUDE OIL STORAGE

Skid Mounted Tanks400 BBLS Capacity

Equipped with Sight Glasses and Vent Lines

SURGE TANK

100 bbls capacity

100 psi w.p.

Equipped with sight glasses

Fluid Accumulation and degassing

SURGE TANK

Skid Mounted

50 bbls Capacity

50 psi W.P.

Designed for fluid accumulationand measurement during the testing of low producing wells

Useful for Meter Calibration

VERTICAL FLARE STACK

60’ and 100’ High

Equipped with electronic ignition

8” gas line

3 - 4” vent lines

Certified for sour service


PRESSURE TEST SYSTEM

MWP of 20K psig

Rate of 15 Gal/min

Power 460 Volt

Cycle 60 Hz

Current 50 Amps


CHEMICAL INJECTION PUMP

Unit with Dual HASKEL Pumps and Relief ( G-series-100 )

Air drive system (Min . 15 psi , Max. 125 psi)

1’’ ID inlet fluid supply pipe

Max. output pressure : 10000 psi with 3 GPM

Stainless steel frame

HYDROCYCLONE & ACCUMULATOR PACKAGE

Design Pressure 15000 psi

Design Temperature 50 to 250 F

Flow Rate 5000 bbls/d @ 30 MMSCF/D

500 bbls/d @60 MMSCF/D

Filter 25 microns

Skid Strainer Package (15 K)

Design Pressure : 15,000 psi ( @ 350 F)

Design Temperature : 50 – 350 F

- The Y-Type strainer is used to remove solids from the process stream and is normally connected downstream of the hydrocyclone

TRANSFER PUMP

Power 460 V & 60 Hz

NACE MR- 01-75

Maximum Flow Rate 5,000 BPD and 10,000 BPD

50 PSI Discharge Pressure

60 HP Explosion proof motor and starter switch

Skid mounted

This pump is used to transfer oil/diesel


ACID PUMPING UNIT Plunger Size 3-1/2” Plunger Size 4-1/2”

Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate

: 10,394 psi : 273 GPM @ 700 psi : 55 GPM @ 4500 psi : 6,288 psi : 312 GPM @ 700 psi : 96 GPM @ 4,500 psi

§ Batch Mixing and Blending Skid with 2 x 60 barrel Blending Tanks complete with Acid Additives

§ Complete set of 3” / 2” x 5000 psi WP and 3” / 2” x 10,000 psi WP Piping, Elbows, Chicksans & X-Overs.

§ 3” x 10,000 psi WP Coflexip Hoses (H2S, CO2 and Acid Service) § Laboratory with complete test facility equipment


OFFSHORE AND ONSHORE

DST SERVICES PROVIDED

hCASED HOLE hFULLBORE DRILLSTEM TESTINGhSLIM HOLE DRILLSTEM TESTING

hCONVENTIONAL ( MECHANICAL ) DRILLSTEM TESTING

hOPEN HOLE CONVENTIONAL ( MECHANICAL ) DST


Drill Stem Testn RTTS Packern The RTTS packer is a full-opening, hookwall packer used for testing, treating, and squeeze cementing operations. In most cases, the tool

runs with a circulating valve assemblyn RTTS Safety Jointn The RTTS safety joint is an optional emergency backoff device. The safety joint releases the workstring and tools above the packer if the

packer becomes stuck during operationsn FUL-FLO Hydraulic Circulating Valven The FUL-FLO hydraulic circulating valve serves as a bypass around the packer or as a circulating valve to circulate a well after testingn Internal Pressure-Operated (IPO) Circulating Valven The internal pressure-operated (IPO) circulating valve is a single-shot circulating valve which allows circulation through the workstring

before trip-out and serves as a drain valve during trip-out. It can be run in cased holes or openholes and maintains a full bore through the tool

n Repetitious Circulating Valven The Repetitious circulating valve is an annulus pressure- operated, recloseable circulating valve. Throughout the operation, the tool is

repeatedly cycled up to a predetermined annulus pressure and then releasedn RTTS Circulating Valven The RTTS circulating valve is a locked-open/locked-closed valve that serves as both a circulating valve and bypassn Rupture Disk (RD) Safety Circulating Valven The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valven Tester Valven The Pressure Operated tester valve is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased

holes where pipe manipulation is restricted and a full-opening string is requiredn Test Tools Select Tester Valven The Select Tester valve is a full-opening, annulus pressure-operated tooln Tubing String Testing (TST) Valven The tubing string testing (TST) valve is a full-opening valve used to pressure-test the workstring while running in the holen Rupture Disk (RD) Tubing String Testing (TST) Valven The rupture disk (RD) tubing string testing (TST) valve is a full-opening valve used to pressure test the workstring while running in the holen Round Mandrel Slip joint


Drill Stem Testn The rupture disk (RD) tubing string testing (TST) bypass valve is a weight- activated,

normally open valven Shock Absorbern Shock absorbers protect pressure-measuring equipment or other sensitive components in the

workstring for shock loads transmitted through the workstring by firing of TCP gunsn Hollow Plug Impact Reversing Subn The hollow plug impact reversing sub is used in the more difficult operations where depth and

high-pressure differential across the plug sometimes make it difficult to open a conventional reversing sub

n HYDROSPRING Testern The HYDROSPRING tester was developed to provide a reliable and field-proven downhole

master valven VR Safety Jointn The VR safety joint is a compact, right- hand safety joint used in the drillstem testing stringn Normal Technical requirementsn Pressure:70Mpa(10000PSI) 105MPA(15000PSI)n Temperature:400Fn Service: Inner H2S,Full H2Sn Connection thread: As per API or requirements


The Packer is Set

Annulus Pressureis Applied to

Openthe Tester Valve

Several methods can be used to

Fire TCP GunsThe Well will thenbe flowing

Releasing the Annulus Pressure,

Closes the Tester Valvefor a Build Up

At the end of the Test any of the Circulating Valves may be used toReverse Out the String

Fullbore TCP / DST / Well Test in Casing


33

Full Bore and Slim Hole

DST Tools

Full Bore MC Tester Valve

Full Bore Gauge Carrier

Full Bore Hydraulic Jar

Full Bore Expansion Joint

Full Bore Safety Joint

Full Bore Test Packer

TY

PIC

AL

FU

LLB

OR

E D

ST

AS

SE

MB

LY

Full Bore SS Exit Valve

Full Bore MC Circulating ValveKINGWELL OILFIELD DST

PORTED SUB

FU LL BORE CASING PACKER

FU LL BORE SAFE TY JOINT

FULL BORE H YDR AULI C JAR

FU LL BORE TESTER VALVE ,

FU LL BORE CIRCULATING VALVE,

FULL BORE KILL VALVE,

CA SING

FULL BORE GAUGE CARRIE R,


DR ILL COLLAR

DR ILL COLLARS

DR ILL PIPE

PR ESSURE TRANSFER SUB

AD APTER SUB

BELOW PACKER SAFETY J OINT

TU BING JOINT

SH OCK ABSORBERTU BING JOINT

HY DRA ULIC FIRING HEAD

BLANK SAFETY SPACER

LOADED & B LANK PERF GUN

BU LL NOSE

R/A MARKER SUB


DR ILL COLLAR

FULL BORE GAUGE CARRIE R,

CA SED HOLE TCP / DST

SHOOT & TESTFULLBORE 2.25“ ID

TOOLS

FO

RM

AT

ION

TO

BE

TE

STE

D

FULL BORE CASING PACKER

FULL BORE SAFETY JOINT

FULL BOR E HYDRA ULIC JAR

FULL BORE TESTER VALVE,

FULL BORE CIRCULATING VALVE,

FULL BOR E KI LL VALVE,

CA S ING

FULL BOR E GAUGE CARRIER ,


DRILL COLLAR

DRILL COLLARS

DRILL PIPE

R/A MARKER SUB


DRILL COLLAR

FULL BOR E GAUGE CARRIER ,

RECORDER FLOW SUBW/ RECORDER S"O UTSIDE"

FLO W PORTS

CASED HOLE DST FULLBORE 2 .25“ ID

TOOLS

PER

FO

RATI

ON

S

3-1/8” OD x 1-1/8” IDfor use in 5”, 5-1/2” csg

5” OD x 2-1/4” IDfor use in 7”, 9-5/8” csg

15,000 psi350 deg F

RE CORDER FL OW S UBW/ RECORDERS"OUTSI DE "

FL OW P ORTS

DROP BAR REVERSE CIRCULATING SUB

DRILL COLLAR S

RECORDER C ARR IERW/ RECORDER"INSIDE"

C ROSSOVER SUB

T UBING PRESSURE ACTIVATEDR EVERSE CIR CULATING SUB

TESTER VALVE,SLIDI NG SLEEVE TYPE

SAMPLER

HYDRAULIC JARS

RECORDER C ARR IER W/RECORDER "INSIDE"

SAFETY J OINT

DRILL COLLAR SDRILL PIPE

PA CKER

RECORDER FLOW SUBW/ RECORDERS"OUTSI DE"

FL OW PORTS

DROP BAR REVERSE CIRCU LATING SUB

DRILL COLLARS

RECORDER CARRIERW/ RECORDER"IN SIDE"

CROSSOVER SUB

TUBING PRESSURE ACTIVATEDREVER SE CIRC ULAT ING SUB

SHUT-IN TOOL, ROTATIONALSLIDING SLEEVE TYPE

SAMPLER

HYDRAULIC JARS

RECORDER CARRIER W/RECORDER "IN SIDE"

SAFETY JOINT

DRILL COLLARSDRILL PIPE

BULL NOSEPERFORATED

PERFORATED ANCHOR(TAILPIP E)

TESTER VALVE,SLIDING SLEEVE TYPE

PACKER

RECORDER FLOW SUBW/ R ECO RDERS"OUTSIDE"

FLOW PORTS

DRIL L COLLARS

RE CORDER CARRIERW/ RECORDER"INS IDE "

SAM PLER

HY DRAULIC JAR S

RE CORDER CARRIER W/R ECO RDER "INS IDE "

SAF ETY JOINT

DRIL L COLLARSDRIL L PIPE

TES TER VAL VE,SLIDING SL EEVE TY PE

STRADDLE BYPASS

PACKER

PERFORATED ANCH OR( TAI LPI PE)

PACKER

PACKER

B ULL NO SE W ITH BE LO W S TRADD LER EC ORD ER

PERFORATED ANCH OR( TAI LPI PE)

SHUT- IN TOOL, ROTATIO NALSLIDIN G SLEEV E TYPE

STRADD LE BYPASSRECEIVE R

OPEN HOLECONVENTIONAL

BOTTOM HOLE TESTON PENETRATION

OPEN HOLECONVENTIONALSTRADDLE TEST

FO

RM

AT

ION

TO

BE TE

STE

D

PA CKER

RE CORDER FL OW S UBW/ RECORDERS"OUTSI DE "

CASED HOLE DST BAREFOOT TESTCONVENTIONAL

TOOLS

OP

EN

H

OL

E

CASING

FULL BOR E CASING PACKER

OP

EN

H

OL

E

OP

EN

H

OL

EO

PE

N

HO

LE

OP

EN

H

OL

E

5” OD Mechanical Toolsfor use in 8-1/2”, 12-1/4”Open hole

5” OD Mechanical Toolsfor use in 7”, 9-5/8” csg


n The Select Tester valve is a full-opening, annulus pressure- operated tool. with applied pressure, the tool can be locked open and then returned to the normal operating sequence at any time. The ball valve operates independently of pressure changes from operations such as acidizing and fracturing. This gives the Select Tester valve greater compatibility and flexibility with other tools in the string.

Select Tester valve

5'' OMNI Valve

n Detailed Product Descriptionn Halliburton type OMNI Valve, all could change with Halliburton parts. DST circulating Valve 15000PSI above 175F H2S&Acid service

n The Repetitious circulating valve (OMNI Valve) is an annulus pressure operated, recloseable circulating valve. Throughout the operation, the tool is repeatedly cycled up to a predetermined annulus pressure and then released.

n n The Repetitious valve consists of a nitrogen section, an oil system, a circulating valve, and a ball valve. The nitrogen section contains the

nitrogen gas that counter balances the hydrostatic and annulus pressures.n n The amount of nitrogen in the tool depends on well hydrostatic (mud weight and depth) and downhole temperature. This information must

be known to properly prepare the tool for running in.n n Note: With certain completion fluids, the mud weight at the surface can be significantly different from the actual mud weight downhole.n n The operating and control mechanisms are contained in a closed oil system activated by annulus pressure acting on the nitrogen chamber,

allowing an unlimited number of pressure cycles. The circulating valve and the ball valve work together to keep circulating pressure off the formation. The ball valve will close before the circulating valve opens. The ball valve closes off the


5'' LPR-N valven Detailed Product Descriptionn Halliburton type, all could change with Halliburton parts.Pressure Poerated

tester valve (LPR-N valve) is annulus operated valve

n The Pressure Poerated tester valve (LPR-N valve) is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased holes where pipe manipulation is restricted and a full-opening string is required. The nitrogen chamber is charged at the surface to a selected pressure determined by surface temperature, bottomhole temperature, and bottomhole pressure. If the intended test requires a permanent packer that uses a stinger mandrel or seal nipple, a variety of bypass tools are available, depending on field application, to help ensure that the formations and downhole equipment are

n protected from excessive pressure buildup.


5'' RD Safety Circulating Valve n Detailed Product Description

n The rupture disk (RD) safety circulating valve functions as bothn a safety valve and circulating valve.

n The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The tool functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool. This tool converts into a circulating valve when the ball valve section is removed.


RTTS Safety Joint

n 1.Halliburton type, all could change with Halliburton parts.

The RTTS safety joint is an optional emergency backoff device .The safety joint releases the workstring and

n tools above the packer if the packer becomes

stuck during oprations.


5"Round Mandrel Slip Jointn 5"Round Mandrel Slip Joint

n Detailed Product Descriptionn 1.Halliburton type, all could

change with Halliburton parts.n 2.DST Round Mandrel Slip Joint

are H2S&Acid service.

n The round mandrel slip joint,like other slip joints, accepts the movement associated with ocean heave or

n temperature change without allowing the movement to disturb the placement of downhole tools.

n

DST TOOLS PARTS


RTTS PACKER



n KINGWELL OILFIELD MACHINERY CO.LTDn TOP Oil Tools Suppliern Tel：（86-29）88601839 n Fax ：（86-29）88601839n E-mail: jerrywang : [email protected] Linda: [email protected] SKYPE: xakingwelln MSN: [email protected]
