Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
iVibAdvancedMachinery Supervisor
iVib Advanced Machinery Supervisor is the smart solu>on for protec>on, monitoring and failure modes iden>ca>on for your cri>cal rota>ng machinery from con>nuous monitoring of vibra>on, temperature and other parameters.
Protection, surveillance and advanced diagnostics
1
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
Measure
iVib leverages the latest advances in mobile electronics devices to get a quality signal processing equipment beSer than convenTonal industrTal analysis devices.
Furthermore, the high processing speed allows a large number of operaTons without heaTng its CPU and with a minimum power (max. 3 W).
In their conguraTons of 2, 4 or 8 dynamic signal channels, the iVib is a modular system applicable to any industry where machinery is criTcal to be monitored for early warning of potenTal failures that threaten the reliability of the producTon process.
ProcessSee
State of the art machinery monitoring
With iVib a much simpler machinery monitoring soluTon comes out. An iVib monitoring system is composed only by sensors (vibraTon, temperature, speed, current, voltage, power consumpTon, video,...), a small size process measurement unit and a web browser to access data.
Moreover, the system provides informaTon to maintenance supervisors on the evoluTon of the state of machinery, their failure modes, alerts and the development of typical faults of rotaTng machinery. It also includes advanced diagnosTc tools for vibraTon experts for remote analysis of the machine.
A new concept
Last generation electronics
2
Fig. 1 iVib Advanced Machinery Supervisor.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
All cloudtechnology benefits
Measured data are accessed from a web browser (cloud monitoring). The advantages of this new technology are:
For over a decade internet applicaTons have shown higher producTvity.
Cloud monitoring
It eliminates the need for a local server and therefore also its maintenance is eliminated.
No need to pay for licenses for access to informaTon.Access is not limited to one or a certain number of computers.
Obsolescence is avoided by applying automaTc updates.
It is very intuiTve, which accelerates the learning curve and allows the user to access all of the funcTonality from scratch.
The iniTal investment is reduced by simplifying the monitoring system.
The system is part of the Preconcerto predicTve maintenance manager pla`orm.
Safety, Reliability, Availability
3
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
iVib monitoring system includes MODBUS bidirecTonal communicaTon for seamless integraTon with the Distributed Control System Plant (DCS /SCADA).
BidirecTonal communicaTon allows iVib import parameters to correlate vibraTon measurements with temperature and other parameters in the plant distributed control system.
Simple
But the outstanding of this system is the intelligence the enTre system has been developed. This soluTon, developed enTrely by Spanish engineers, is placed from the beginning to the head of the monitoring systems of rotaTng machinery in simplicity, eciency and cost/benet.
The iVib monitoring system will provide surveillance tools and diagnosTcs to help you to follow up the development of the failures of the equipment in good Tme, in a simple, pracTcal and eecTve way.
Simplicity, efficiency and the best cost/benefit
DCS integration (SCADA)
worksALWAYS
4
Fig. 2 Display data access through congurable mimics.
Fig. 3 The Modbus communicaAon protocol is compaAble with most SCADA or DCS systems.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
The failure modes monitoring is performed from the parameters comprising the assets health matrix. This matrix is composed in columns measuring points of each machine and rows for the indicators of each symptom of the failure modes of each machine.
The iVib system supervises directly failure modes dened for the monitored machines, so we get a green, red or orange peel for each failure mode of each component of the monitored set. For example, typical failure modes of pump motor assemblies can be monitored individually such as unbalance, misalignment, looseness... In this way the user has useful informaTon about the health status of his machinery even if there is no vibraTon analyst at the plant.
If once detected a fault, a more precise diagnosis is required, iVib facilitates access to analysis data (spectra and vibraTon waves) in remote mode so an expert analyst may develop a more accurate diagnosTc report.
Assets health matrix
iVib system constantly monitors criTcal machinery and when any anomaly is detected, automaTcally generates a message with informaTon on the developing failure mode. It is essenTal that this infomaTon is known to the maintenance supervisors from the start, so iVib can generate an email or an SMS when an important alert is detected.
Always alert
Protection
Diagnostics
Monitoring
5
Fig. 4 Assets health matrix serves supervisors to idenAfy the source of failures with a simple glance.
Fig. 5 Current technology allows automaAc communicaAon generaAng alert emails or mobile short messages.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
IntuitiveEASYFlexible
Set it up as you l ike!
iVib set up is intuiTve, simple and very exible. Dierent available widgets types show the informaTon to the user in a clear and useful, so the analyst only needs to focus on accurately diagnose the fault without worrying about managing the diagnosTc tools.
Available widgets include:
The simplicity of this applicaTon does not imply giving up the advanced diagnosTc funcTons. Since iVib has all the tools necessary for the analyst, it is very comfortable to analyze vibraTo data from the machine.
Fully configurable
Parameter trends for idenTfying changes over Tme.FIFO, is another way to see a recent trend to detect recent changes on monitoring parameters.
Parameter matrix, including all dened monitoring parameters, they change color to warn about alarms.
VibraTon spectrum, is the most informaTve chart for the vibraTon analyst and serves to make the diagnosis of the machine.
Time waveform, someTmes the spectrum contains hidden informaTon and therefore wave is used as addiTonal informaTon.
Mimics, to facilitate the idenTcaTon of alerts detected by the system in a way quite visual.
Text box, to enter explanatory notes.Webcam to monitor the image of the machine and its environment. Also may incorporate an infrared camera for conTnuously thermographic inspecTon.
6
Fig. 6 Asset state access becomes immediate even for those who have not previously worked with the system.
Fig. 7 Congurable widgets allow the user to create user-dened dashboards for monitoring and diagnosAcs.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
AdaptableSmartAccurate
One diculty for vibraTon measurement systems is how to idenTfy automaTcally the right Tme to perform and validate their vibraTon measurements when the machine operaTon changing condiTons aect vibraTon levels. If this is not taken into account, the changes in speed or load distort vibraTon values and therefore monitoring would be unreliable since false alarms were generated.
iVib Advanced Machinery Supervisor is prepared for this diculty to evaluate machines by predened states. So we can avoid false alarms and detect faults from the rst symptoms and establish Tghter alarms.
Intelligent monitoring
7
iVib incorporates the latest demodulaTon technology and high frequency signal ltering to idenTfy bearings and gears faults. AddiTonally, this technology detects failures in machines at very low speed.
Better detection in bearings and gears faults
Fig. 8 Alarm levels are congurable for each machine state.
Fig. 9 DemodulaAon technique incorporated by iVib idenAes faults in bearings and gears from its very early stages.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
SimplerArchitecture
sensors:- vibration- temperature- image- other
iVib measurement device
data access(web browser)
8
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
Features and functions
Power 3 W @ 24 V DCDimensions: 120 x 80 x 27 mm
Modbus IN/OUTStatus, alarm and trip relays
Op>ons:Display and AC output connectorDC 4-20 mA outputTransient recordingPower over Ethernet (PoE)WiFi communicaTonPI Interface (OSIsoi)
Ma. sampling rate 51.2 kHzDemodulaTon
ProtecTon, surveillance and diagnsTcsIntelligent alarms according to machine states
Servers independent
Internet browser based data access
9
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
Conections
iVib system includes the following connecTons.
Inputs:
Outputs:
Connections
Dynamic Signal Channels: 2, 4 or 8 depending on modelAuxiliary channels, 2 (iVib 202) or 4 (iVib 204/208) congured as:
- 0-10 VDC Inputs (or 4-20 mA with addiTonal resistance)
- Tachometer Inputs- Logic inputs
DC 4-20 mA Output (opTonal for model iVib 202)Logic outputs:- Unit status led- Warning indicator led- Trip indicator led
Ethernet and Modbus TCP communicaTon10
iVib
inpu
ts a
nd o
utpu
ts s
chem
e
LEDs Dynamic channels
WiFi opTonal antenna
Ethernet
24VDC Power supply
Relay outputs
Aux. Inputs 1 and 2
Aux. Inputs 3 and 4
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
Where toinstall?
Applications
11
Surveillance Diagnostics
Electric motors 1 2-3
Motor-Pumps 1 3-4
Fans and Blowers 1 2-3
Screw compressors 1 2-3
Gearboxes 1 4-6
Cooling towers 1 2-3
Windmills 1 6-8
Centrifugal separators 1 3-4
Machine tools 1 consultar
Hydraulic turbines 1 3-4
Mills (cement, gypsum, lime,...) 1 2-3
Radars (civil and military) 1 consultar
Cranes machinery 1 consultar
Railways 1 consultar
Tunnels fans 1 2
iVib system is designed for monitoring criTcal rotaTve machinery. Here is a list of the main types of machines and the number of conTnuous vibraTon measurement points recommended by the type of machine.
VibraTon conTnuous monitoring systems apply to criTcal machinery of industrial power generaTon, petrochemical, chemical, paper, metalworking, water process, pharmaceuTcal, food, cement, shipbuilding, etc..
iVib
is fo
r ind
ustri
al c
ritic
al m
achi
nery
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
WhyiVib?
iVib Machinery Supervisor highlights over other technologies on the market by:
Advantages and benefits of iVib
12
Simpler installa>on. System architecture is simplied to the maximum.Low maintenance. As being a very simple system, analysts themselves and instrumentalists of the plant can review and congure the system.BeQer access to informa>on. Because you only need a web browser to log in as a data supervisor, as an analyst or as a manager.PlaRorm extremely intui>ve. Since data access is performed through congurable displays (mimics), so all those responsible for the reliability of the plant can easily access to the informaTon.IT Independent. iVib system does not depend on IT services, is accessible from any place and from any device.Data integra>on. BeSer data integraTon with other plant systems throughbidirecTonal ModBus communicaTon (TCP / IP).Remote analysis. iVib incorporates advanced diagnosTc tools to facilitate analists jop both in situ and remotely.WiFi and PoE opTons to reduce installaTon costs.Automa>c monitoring of failure modes regardless of the analyst.Technical Support. Design services, installaTon, commissioning, training and opTonal remote diagnosTcs.Best value/market price, which can monitor more machines or include a greater number of points in the monitored machines to increase the monitoring reliability.
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
iVib ABC-D-E-F-G-H-I
A: 2, Number of parallel dynamic input channelsB: 0C: 2, 4, 8 Number of total dynamic input channelsD: DAC, Display and isolated AC output connector *E: DC, 2 DC outputs *F: PoE, Power over EthernetG: WF, WiFi communicaTonH: TR, Transient recordingI: PI, PI communicaTon interface
Example:iVib 202-DAC-DC-TR
*) Only available for iVib 202
iVib 202 iVib204 - iVib208
AC Inputs 2 4 - 8
Aux. Inputs (DC, trigger, logic) 4 4
Image monitoring Yes Yes
Status, alert and trip relays Yes Yes
Channel status led Yes Yes
Bidirectional MODBUS communication
Yes Yes
Machine states Yes Yes
Demodulation Yes Yes
Local display + AC output with connector (buffered output)
Optional Yes
DC outputs Optional Optional
Transient recording Optional Optional
PoE Power Optional Optional
WiFi Optional Optional
PI Communication Optional Optional
iVib
Mod
els
13
Mai
n iV
ib fu
nctio
ns a
nd o
ptio
ns
Preditec/IRM Tel: +34 976 200 969 Ph: +34 916 121 163 Fax: +34 976 362 340 Oces in Madrid, Zaragoza, Barcelona, Albacete, A Corua, Tarragona y Cdiz - Spain
www.preditec.com
General data:
ARM Cortex-A8 Microprocessor, 600 MHzDimensions (120 x 80 x 27 mm)Anodized aluminum housingOperaTng temperature (no WiFi): -20 to 65 COperaTng temperature (with WiFi): -20 to 50 C
Power:
Power at 18-26 V DC or PoE opTon (Power over Ethernet) to 48 VPower consumpTon less than 3W (125 mA)
Memory:
256 MB RAM256 MB FLASH for soiware2 - 8 GB FLASH for data (Internal microSD)
Dynamic inputs:
iVib Model 202, 2 parallel dynamic inputsIVib Model 204, 4 mulTplexed dynamic inputs (parallel two by two)IVib Model 208, 8 mulTplexed dynamic inputs (parallel two by two)24-bit ADC converter (theoreTcal SNR: 144 dB)Maximum sample rate of 51,200 HzInput impedance (power ICP):> 400 KInput voltage range -24 V to 24 VPower for ICP transducers: 5 mA from 24 V (enabled by soiware)AC or DC coupling soiware selectableLower cuto frequency using AC coupling: 0.16 HzSelectable gain: 1, 2, 4, 8, 16, 32, 64, 128Independent RMS value measurement on all inputs simultaneously for state machine detecTon (ADC 10 bits)Independent DC value measurement on all inputs simultaneously for sensor fault detecTon (ADC 10 bits)
Auxiliary inputs:
iVib 202, 2 auxiliary inputsiVib 204, 4 auxiliary inputsiVib 208, 4 auxiliary inputsOperaTng modes: voltage, frequency or digitalInput impedance:> 100 KVoltage Mode: Input voltage range: 0 to 24 V (-24 V tolerant) Selectable Gain: 1, 2, 4, 8 16-bit ADC (theoreTcal SNR: 96 dB)Digital mode: Input voltage range: 0 to 24 V (-24 V tolerant) Hysteresis: ~ 0.9 V Minimum voltage for high-level change: ~ 2.4 V Maximum voltage for low level change: ~ 1.5 V
Frequency mode: Electrical characterisTcs same as in digital mode Minimum frequency: 0.0167 Hz (1 CPM) Maximum frequency: 10 kHz (600,000 CPM)
Relay outputs:
Number of relays: 3SPST contactsMaximum charge voltage: 60 VMaximum current: 400 mAIsolaTon voltage: 5,000 V
DC outputs (op>onal):
Number of Outputs: 2Galvanic isolaTon: no
Connec>vity:
100 Base-T Fast Ethernet with PoE (Power over Ethernet)Modbus TCP/IPWiFi 802.11g with SMA connector for external antenna (opTonal)
LEDs:
Status LED: green/yellow/redDynamic channel LEDs: green/yelow/redRelay LEDs: redEthernet connector LEDs: green (link / act and 10/100)
LCD display (op>onal):
Available only on the model iVib 202Size: 1.8'' (29 x 36 mm)128 x 160 pixels, RGB
Buered outputs (op>onal):
Available only on the model iVib 202Output impedance: 470 AC coupling (lower cuto frequency: 0.16 Hz) with 12 V bias
Firmware:
OS: Linux (kernel 2.6.34 or newer)Upgradable through internet
Soaware:
Access to the applicaTon via a web browser (Internet Explorer, Firefox, Safari, Opera, Chrome, Camino ...) from any operaTng system (Windows, Mac OS, Linux, Unix ...)
14 C1005/ENG - Ed.1209
Tech
nica
l spe
cific
atio
ns
Recommended