Specifications subject to change without notice.©All rights reserved. Haisen Technology | 01
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
Detection area
On/off control
Technical data01
HD406VRH
IP65 High altitude installation
remote control Settings
Remote control setting
Detection area
IP65
≤1W
5.8GHz±75MHz
<1mW
Max.(D x H): 16m x 15m
Max.15m
-35°C~+70°C
Operating voltage
Switching capacity
Standby power
Hold-time
Daylight threshold
Microwave frequency
Microwave power
Mounting height
Detection range
Operating termperature
IP rating
Detection angle
Stand-by period
Stand-by dimming level
120-277VDC,50Hz/60Hz
400W@120-220Vac,800W@220-277Vac(Control gear)800W@120-220Vac,1000W@220-277Vac(Incandescent lamp);
150°(wall installation),360°(ceiling installation)
Certificate
Safety standard EN61347-1 EN61347-2-13 EN60598-1
cULus listed,FCC
2Lux/10Lux/30Lux/50Lux 80Lux/120Lux/Disable
25%/50%/75%/100%
5s/30s/1min/3min/5min/10min/20min/30min
0s/10s/30s/1min/5min/10min/30min/+∞
10%/20%/30%/50%
ø80x61.9mmSize
Specifications subject to change without notice.©All rights reserved. Haisen Technology | 01
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
Detection area
On/off control
Technical data01
HD408VRH
IP65 High altitude installation high voltagee,remote control Settings
Remote control setting
Detection area
IP65
≤1W
5.8GHz±75MHz
<1mW
Max.(D x H): 16m x 15m
Max.15m
-35°C~+70°C
Operating voltage
Switching capacity
Standby power
Hold-time
Daylight threshold
Microwave frequency
Microwave power
Mounting height
Detection range
Operating termperature
IP rating
Detection angle
Stand-by period
Stand-by dimming level
347-480VDC,50Hz/60Hz
400W@120-220Vac,800W@220-277Vac(Control gear)800W@120-220Vac,1000W@220-277Vac(Incandescent lamp);
150°(wall installation),360°(ceiling installation)
Certificate
Safety standard EN61347-1 EN61347-2-13 EN60598-1
cULus listed,FCC
2Lux/10Lux/30Lux/50Lux 80Lux/120Lux/Disable
25%/50%/75%/100%
5s/30s/1min/3min/5min/10min/20min/30min
0s/10s/30s/1min/5min/10min/30min/+∞
10%/20%/30%/50%
ø80x61.9mmSize
Specifications subject to change without notice.©All rights reserved. Haisen Technology | 01
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
Detection area
On/off control
Technical data01
HD409VRH
IP65 High altitude installation remote control Settingsmobile APP Settings,bluetooth networking.
Remote control setting
Detection area
IP65
≤0.5W
5.8GHz±75MHz
<1mW
Max.(D x H): 16m x 15m
Max.15m
-35°C~+70°C
Operating voltage
Switching capacity
Standby power
Hold-time
Daylight threshold
Microwave frequency
Microwave power
Mounting height
Detection range
Operating termperature
IP rating
Detection angle
Stand-by period
Stand-by dimming level
120-277VDC,50Hz/60Hz
400W@120-220Vac,800W@220-277Vac(Control gear)800W@120-220Vac,1000W@220-277Vac(Incandescent lamp);
150°(wall installation),360°(ceiling installation)
Certificate
Safety standard EN61347-1 EN61347-2-13 EN60598-1
cULus listed,FCC
2Lux/10Lux/30Lux/50Lux 80Lux/120Lux/Disable
25%/50%/75%/100%
5s/30s/1min/3min/5min/10min/20min/30min
0s/10s/30s/1min/5min/10min/30min/+∞
10%/20%/30%/50%
ø80x61.9mmSize
App
Wirelessnetworking
Mobile App setting
App
Specifications subject to change without notice.©All rights reserved. Haisen Technology | 01
Detection area
IP20
120~277 VAC 50/60Hz
Max.200W(Control gear) Max.400W(Incandescent lamp)
<1W
50%/100%
5s/30s/1min/10min
2Lux/10Lux/50Lux /Disable
5.8GHz±75MHz
<0.3mW
6-pole pluggable clamp terminal (L,N,N,L’,1-10v+,1-10v-)for 0.75-1.5mm2 cable
Max.15m(ceiling mounted)
Max.12x15m(ceiling mounted) Max.20m(wall mounted)
-20°C~+55°C
90x45x23.2mm; HD02VRH,51x24.4x14mm
cULus listed,FCC
Operating voltage
Switching capacity
Standby power
Hold-time
Daylight threshold
Microwave frequency
Microwave power
Mounting height
Detection range
Operating termperature
IP rating
Certificate
Interfaces
Size
Stand-by period 0s/30s/20min/+∞
Stand-by dimming level 10%/20%/30%/50%
INPU
T
OU
TPU
T
L
N
N
L
0.75
-1.5
1-1
0V-
+
Co
ntr
ol ’
Lighting Control SwitchModel:HD V-CRInput:120-277V~50/60HzLoad:Incandescent lamp: Max.400WElectronic lamp controlgear: Max.200W
SELV 1
Detection Range
II II II II II
III III III III
IV IV IV IV
2 4 6 8 3 5 7 9
I I I I I
Hold Time Daylight Sensor Stand-by Period
5S 0SDisable
50Lux
10Lux
2Lux 50%
50%
100%
30%
20%
10%
30S 30S
1min
10min
20min
Stand-by Dimming level
SELV(C
lass 2)
∞+
1-10V
Motion sensorinterface
Detection RangeHold time
Daylight threshold
Stand-by Dimming level
Stand-by Period
INPUT
OUTPUT
Installation hole
Daylight sensor
IR sensorHD02VRH
Hold-time
Daylight threshold
Stand-by period
Stand-by dimming level
Detection area
On/off control
Remote controlsetting
Technical data01
Wiring diagram
HD405V-CRHHD405V-CRHHighbay separate antenna dimming sensor
Haisen Technology | 02Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: [email protected] 丨www.haisensz.com
When motion detected, insufficient daylight,light ON.
When motion detected, but sufficient daylight,light remains OFF.
After the stand-by period, light OFF.After last detection, the light will be dimmed down to the stand-by dimming level(10%,20%30%,50%).
Hold time Stand-by period
02 Mechanical structure(mm)03
Installation Method04
Application05
Wiring diagram
Function Demo - Dimmable control/Corridor function
L
N
L 'N - +1-10V
La od
1-10 LED Deiver
Yellow L
Brown LBlue N
Black -Red +
61.9
44
9.6
9.4
1.5
ø80
53.3
50
ø3.2
ø18
Note: Motion sensor setting and dimming setting please refer to remote control HD02R.
HD406VRH (C) HD406VRH (D)
HD406VRH (A) HD406VRH (B)
HD408VRH (C) HD408VRH (D)
HD408VRH (A) HD408VRH (B)
HD409VRH (C) HD409VRH (D)
HD409VRH (A) HD409VRH (B)
Haisen Technology | 02Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: [email protected] 丨www.haisensz.com
When motion detected, insufficient daylight,light ON.
When motion detected, but sufficient daylight,light remains OFF.
After the stand-by period, light OFF.After last detection, the light will be dimmed down to the stand-by dimming level(10%,20%30%,50%).
Hold time Stand-by period
3.6
458
76.1
90
23.2
1.8
5146.841.3
1.92.3
24.4
1.8
2.9
4 1.5
14
Switch UP
Switch DOWN
Detection area means detection coverage. It can be adjusted by combining DIP swithches for specific application.
Hold-time means the time period the light will be ON after the last detection.
Daylight sensor priors to motion sensor.Set threshold for specific needs.If Disable, only motion sensor works.
This is the time period the light keeps dimming down after the last detection.
This is the dimming level the light keeps during standy-by period.
Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level
100%
50%
Disable
50lux
10lux2lux
10%
20%
30%50%
5s
30s
1min
10min
0s
30s
20min
+∞
3m
20m
Ceiling Mounted Wall Mounted
02 Settings03
Note: Motion sensor setting and dimming setting please refer to remote control HD02R. HD02VRH Standard Version Cable Length 30mm(can be customized).
Detection coverage04
Application05
Mechanical structure(mm)
15m
12m
Function Demo - Dimmable control/Corridor function