-4952 -4962
IonizersOverview
QOverviewIonizers (neutralization equipment) are available with short lead time as antistatic measures for FA applications.Ionizers can continuously neutralize non-conductive insulating materials with small environmental influence.Newly added products are: 2 kinds of Fan Type (Medium-sized/Compact) capable of neutralizing wide range/ long distance; 1 Nozzle Type capable of spot neutralization and with compact design for easy installation at any desired locations; and 3 kinds of Attachments for Nozzle Type.
QCharacteristics of Medium Size DC Fan Type (ENZR-GB) • 0.6 second of super high speed neutralization is realized by 8 electrode pins and large air volume. (Under the following conditions)• Maximizing the range of wind velocity realized slight wind and high speed neutralization.
• Covers the wide range of area equivalent to 3 pieces of IC tray. • Fan guard can be removed by one-touch sliding, resulting in
saved maintenance time.
QCharacteristics of Compact DC Fan Type (ENZR-B) • Single high voltage transformer generates both positive and negative high voltages.
Concerns for reverse charging with a failed transformer are eliminated. • The extra small design enables installations on the table and in manufacturing equipments.
QCharacteristics of Nozzle Type (ENZR-R)• For its compact design, it can be installed in narrow places inside various kinds of equipments.
• High Frequency AC Type capable of stable high speed neutralization for a long time.• Air consumption is little, stable ion balance is achieved and the running cost is low.• Attachments can be installed when desired.
QPrecautions for Use of Ionizers • Neutralization results vary substantially depending on installation distance, angle, air volume (Fan Type) and air pressure. Please ensure the neutralization results before use.
• Periodical maintenance is necessary. Dirty electrode pins and surroundings may lower the performance or cause displacement of ion balance. Maintenance period may vary depending on the operating environment. Utilize the cleaning lamp as a guide.
QIon Balance and Neutralization Properties
Q�See "Ionizer Free Consignment Sample Service".MISUMI provides a free sample consignment service catered for various customer needs.
1A "Rental Only" unit is consigned.Rental Only Unit can be tested in customer's condition of use.Consignment Ordering Method: Add "-R" after the product name.
2Static Charge Sensor ConsignmentNeutralization effects can be verified numerically by Static Charge Sensor.Consignment Ordering Method: Order with the part number "ENZR-S-R".
* AC adaptors are not included. Order AC adapters when required.* Models available for consignment: ENZR-GB, ENZR-B, ENZR-R, ENZR-BAC, ENZR-RAC, ENZR-T, ENZR-R1, ENZR-R2
Consignment may be unavailable when "Rental Only" units are in the Rented state.* Orders are accepted by 17:00. Shipped on the next business day (Excluding Sat./Sun./Holidays).* 10 days rental period. To return the units, follow the instruction in the document included in the package.* The return shipping charge to be paid by the customer. (Retain a copy of shipping bill of lading.)* For the details of this service, see http://fa.misumi.jp/se/. Ionizer product manual is available for download also.
Neutralization Property Data by Wind Velocity
Wind Velocity Static Neutralization Time
Max. 4.6m/sec 0.6 sec.
Min. 1.3m/sec 1.8 sec. Measured Distance 300mm
Cautions: Measured values are not guaranteed values but an example of measured values.Conditions: Charge Plate Monitor Use (150mm x 150mm, 20pF)
Top: Ion BalanceBottom: ±1000V ~ ±100VAir Volume: Max.
ENZR-GB
300[mm] 300[mm] 300[mm] 300[mm]
150[
mm
]15
0[m
m]
Air Flow
(TP1)±0[V]1.4[Sec]
(TP2)±0[V]0.6[Sec]
(TP3)+2[V]1.2[Sec]
(TP4)±0[V]2.5[Sec]
(TP5)±0[V]1.5[Sec]
(TP6)-2[V]2.4[Sec]
(TP7)+2[V]3.5[Sec]
(TP8)+2[V]2.6[Sec]
(TP9)+3[V]3.3[Sec]
(TP10)+3[V]4.5[Sec]
(TP11)+3[V]4.2[Sec]
(TP12)+3[V]4.3[Sec]
Medium Size DC Fan Type (ENZR-GB)
Cautions: Measured values are not guaranteed values but an example of measured values.Conditions: Charge Plate Monitor Use (150mm x 150mm, 20pF)
Top: Ion BalanceBottom: ±1000V ~ ±100VAir Volume: Max.
ENZR-B
300[mm] 300[mm] 300[mm] 300[mm]
150[
mm
]15
0[m
m]
Air Flow
(TP1)±0[V]3.0[Sec]
(TP2)±0[V]1.5[Sec]
(TP3)+2[V]3.4[Sec]
(TP4)±0[V]6.9[Sec]
(TP5)+1[V]4.2[Sec]
(TP6)+1[V]6.1[Sec]
(TP7)±0[V]10.2[Sec]
(TP8)+2[V]6.4[Sec]
(TP9)+1[V]7.7[Sec]
(TP10)+1[V]14.0[Sec]
(TP11)+1[V]12.6[Sec]
(TP12)+2[V]10.8[Sec]
Compact DC Fan Type (ENZR-B)
Cautions: Measured values are not guaranteed values but an example of measured values.Conditions: Charge Plate Monitor Use (150mm x 150mm, 20pF)
Top: Ion BalanceBottom: ±1000V ~ ±100VAir Pressure 0.2MPa
ENZR-R
100[mm] 100[mm] 100[mm]
Air Flow
(TP1)-3[V]0.3[Sec]
(TP2)-4[V]0.6[Sec]
(TP3)-7[V]1.0[Sec]
ENZR-R Attenuation Characteristics (Measured Distance 100mm)
-1000
100
500
10001100
0 1 2 3 4 5Attenuation Hours (s)
Ion
Bala
nce
(V)
0.1MPa0.2MPa0.3MPa0.4MPa
Air Pressure
Nozzle Type (ENZR-R)
ENZR-R2
ENZR-R
ENZR-GB
ENZR-R
ENZR-B
ENZR-T
IonizersMedium Size DC Fan Type / Compact DC Fan Type / Nozzle Type
QMedium Size DC Fan Type Part Name1Power Switch2Error Indicator3Cleaning Lamp4Fan Guard Stopper5Air Volume Controller6Ion Balance Controller7Fan Guard8Power Connector (for AC Adapter)9Terminal Block0Angle Adjuster KnobQStand
ENZR-GB
60
172
183
604020°
Ø765.5
90145
1306051
178
7-Ø5.5
123456
7
89
0
qEConnecting the power supply in reversed
polarity may cause failures.
M Material Main Body Case: ABSStand: SUS304Fan Guard: SUS304
EAC adaptors are not included. Please purchase optional ENZR-BAC.EAC Adapterw P.497EFor orders larger than indicated quantity, please check with WOS.
Part Number Unit Price Volume Discount Rate1 pc. 2 3~5
ENZR-GB
QCompact DC Fan Type
GNDEC
GND+12VGND
+12V
7654321
MADE IN JAPAN
DC IN765432112V
2525
50
14.5 35 35 14.599
113
8213
8
49
122
3-Ø5
85
ab
1
2
8
3
7
5 6 9
0
4
ENZR-B Part Name1Power Switch2Power Lamp3Cleaning Lamp4Ionizing Fan5Power Supply Connector (Input)6Terminal Block7Angle Adjuster Knob
(temporary joint by a, fix by b)8Mounting Holes9PL Label0Electrode Pin
EAC adaptors are not included. Please purchase optional ENZR-BAC.EAC Adapterw P.497EFor orders larger than indicated quantity, please check with WOS.
Part Number Unit Price Volume Discount Rate1 pc. 2 3~5
ENZR-B
QNozzle Type
E4Cap can be removed and replaced with an optional nozzle attachment.EAC adaptors are not included. Please purchase optional ENZR-RAC.EAC Adapterw P.497EAttachmentw P.497EFor orders larger than indicated quantity, please check with WOS.
Part Number Unit Price Volume Discount Rate1 pc. 2 3~5
ENZR-R
Part Number
ENZR-R
-4952 -4962
W P.496~498
33
5
R2.5
10610 107 772
86
ON/OFF
1 2 3 4
GND
PS1/8''98
40.5 50
40.5
193
33 26
(Air Inlet)
High Pressure Air
Terminal
Power Supply
Trouble
Female Union (Ø6)* *Ø6 air tube can be installed.1 2
5
36 6
4ENZR-R
Part Name1Power Switch2Operation-Warning Lamp3Air Inlet4Ion Generator (Metal Cap)5Terminal Block6Mounting Holes
EConnecting the power supply in reversed polarity may cause failures.
ENZR-GB ENZR-B ENZR-RIonizing Method DC Corona Discharge DC Corona Discharge High Frequency Corona Discharge
Discharge Electrode Pin Tungsten Tungsten -
Air VolumeFan Speed: Non-Step Variable, Maximum Air Volume: 3.68m3/min, Wind Velocity: 1.3 ~ 4.8m/Sec (Measured Distance: 300mm)
Fan Speed: Fixed, Air Volume: 0.65m3/min, Wind Velocity: 1.31m/Sec (Measured Distance: 300mm)
Recommended Air Pressure: 0.1 ~ 0.4 MPa, Air Consumption: 55 ~ 155L/min (ANR)
Alarm Display/OutputAlarm Display Cleaning, Fan Error, Fan Guard Removed, High Voltage Halted
Alarm Output Cleaning Indicator, High Voltage Halted, Panel LED Red ON
Alarm Output Dirty Electrode, High Voltage Halted, Strain Relief Removed, Panel LED Red ON
Terminal Block
DC24V Input, DC24V Output (Connectable in series up to 5 units), Cleaning Indicator (includes High Pressure Alarm), Buzzer Output (DC24V), Error Indicator (includes Fan Guard Open Alarm), Grounding
DC24V Input, DC24V Output, Alarm Output, Grounding
DC 24V Input,Neutralization ON/OFF,Alarm Output,Grounding
Ozone Generation Amount 0.02 ppm or Less (Measured Distance 300 mm) 0.02 ppm or Less (Measured Distance 300 mm) 0.02 ppm or Less (Measured Distance 300 mm)Environment 0 ~ 40°C, 80% RH or Less (No Condensation) 0 ~ 40°C, 80% RH or Less (No Condensation) 0 ~ 40°C, 80% RH or Less (No Condensation)Power Input DC24V (Dedicated AC Adaptor or Terminal Block) DC24V (Dedicated AC Adaptor or Terminal Block) DC24V
Consumption Current 550mA 220mA 110mAMass Approx. 900g Approx. 510g Approx. 150g
QIonizers Specifications
M Material Main Body Case: A5052P (Melanin Baked Paint)Stand: SPCC (Melanin Baked Paint)Fan Guard: SUS304
EConnecting the power supply in reversed polarity may cause failures.
Part Number
ENZR-B-R