BIBLIOGRAPHY
• Czinkota and Ronkainen (2002), International Marketing, Thomson South-Western.
• De Mooij (2003), Global Marketing and Advertising, Understanding Global Paradoxes, Sage.
• Keegan and Green (2005), Global Marketing, Prentice Hall.
• Kotler and Armstrong (2006), Principles of Marketing, Prentice Hall.
• Prime et Usunier (2004), Marketing international, Développement des marchés et management interculturel, Vuibert.
• Usunier (2000), Marketing across Cultures, Prentice Hall.• Periodicals: MOCI, HBR, JIBS, JM, JMR…
Introduction
What is international business?
- Wide range of activities involved in conducting business transactions across national boundaries
- Described as being heterogeneous, universal and sequential
- Comprehensive approach to operations of both large and small firms engaged in business abroad
- Concerns all activities of the firm (selling, procurement, outsourcing…)
- About seizing global opportunities (market expansion or diversification)
- Driving forces (regional economic agreements, converging needs and wants, communication improvements, quality, leverage…) and restraining forces (management myopia, corporate culture, national controls, globaphobia…)
Orientations: Export, Internationalization, Globalization
Introduction
EPRG Model• Ethnocentric: everything is centered on the
domestic market.
• Polycentric: several important foreign markets exist.
• Regiocentric: the market is composed of several large economic regions.
• Geocentric: the world is one large global market.
EPRG Model - Characteristics
Ethnocentric Polycentric Geocentric
Approach International operations are secondary
Each country is relatively independent
The world is one common market
Vision Centered on the domestic market
Each market is unique
Global vision of the world
Priority Searching for identical segments in foreign markets
Taking into consideration differences in foreign markets
Unifying differences in the world market
Planning center National headquarters
Subsidiary in each country
World headquarters
Structure International division
Division for each zone
Matrix structure
EPRG Model - Characteristics
Ethnocentric Polycentric Geocentric
Staff Citizens from the domestic market
Citizens from each market
Most qualified
Marketing strategy
Extension Adaptation Extension, Adaptation, Creation
Management style
Centralized Decentralized Integrated and interactive
Production Domestic Local Low-cost sources of supply
Partnerships Agent, licensing Joint-ventures Strategic alliances
Performance measures
Domestic market share
Local market share
World market share
Introduction
• What is marketing?
“Marketing is a social and managerial process by which individuals and groups obtain what they need and want through creating, offering, and exchanging products of value with others.” (Kotler)
Process, exchange, value
Marketing process
Understand the
marketplace and customer
needs and wants
Design a customer-
driven marketing strategy
Construct a marketing
program that delivers superior
value
Build profitable relationships and create customer
satisfaction
Capture value from
customers to create profits
and customer
quality
Create value for customers and build customer relationships
Capture value from customers in return
Marketing
technology
Global
markets
Ethics and
social responsibility
Introduction
What is international marketing?
- “International marketing is the process of planning and conducting transactions across national borders to create exchanges that satisfy the objectives of individuals and organizations” (Czinkota and Ronkainen)
- “International marketing focuses its resources on global market opportunities and threats” (Keegan and Green)
- “International marketing is the motor of the internationalization process of the firm” (Usunier)
- It is a tool used to obtain improvement of the firm’s position in the global market
- Strategy and action, global and local
Introduction
International Marketing Decisions
Deciding whether to go abroad
Deciding which markets to enter
Deciding how to enter the market
Deciding on the marketing program
Deciding on the marketing organization
Introduction
What are the similarities and differences between international marketing and domestic marketing?
– Similarities: basic concepts, practices and tools are almost identical, key success factors are the same…
– Differences: more strategic, more variables, more complex, cultural differences, legal constraints, information sources, managing distances, entry mode choice…
Introduction
International marketing concept
Export marketing
Global marketing
Inter-cultural, multi-cultural
marketing
Course Outline
• Culture and international marketing
• International marketing research
• International marketing strategy and programs
Chapter 1
Culture and international marketing
Culture and international marketing
• Concepts of culture
• Dimensions and models of culture
• Examples and international marketing consequences
What is culture?
• “Culture is the integrated sum total of learned behavioral traits that are shared by members of a society” (Hoebel)
• “Culture is the entirety of societal knowledge, norms and values” (Antonides and Van Raaij)
• “Culture is the collective mental programming of the people in an environment. Culture is not a characteristic of individuals; it encompasses a number of people who were conditioned by the same education and life experience” (Hofstede)
Culture both affects and describes human behavior, it is essential in international marketing
Fundamentals of culture
– Culture is a total pattern of behavior that is consistent and compatible in its components. It is not a collection of random behaviors…
– Culture is a learned behavior. It is not biologically transmitted. It depends on environment, not heredity.
– Culture is behavior that is shared by a group of people, a society. It is a distinctive way of life.
Culture vs. personality
• Personality is the individual’s unique personal set of mental programs that he/she does not share with any other human being.
• Culture is what members of a group have in common. “It is the glue that binds groups together” (De Mooij)
Human nature depends on culture: ideas, values, acts, emotions… are cultural products. Cultural patterns help people to live together in a society.
Manifestations of culture
Symbols
Heroes
Rituals
Values and
Norms
Expressions of culture
Symbols
• Symbols are words, gestures, pictures, or objects that carry a particular meaning recognized only by those who share a culture.
• This is the most superficial manifestation of culture.
• New symbols are easily developed and old ones quickly disappear.
• Symbols from one cultural group are regularly copied by others.
Heroes
• Heroes are people, alive or dead, real or imaginary, who possess characteristics that are highly prized in a society.
• They serve as role models for behavior.
• They can become globally known, but their stories often become local.
Rituals
• Rituals are the collective activities considered socially essential within a culture.
• They are carried out for their own sake.
• They are easily observed, but not always understood.
Values
• Values are at the core of culture.
• Values are stable beliefs regarding desired behavior or end states.
• They often have a religious, ideological or humanistic background.
• Goals are derived from values.
• Values are among the first things children learn, not consciously but implicitly.
• Core values are resistant to globalization; they vary across cultures and are not likely to change frequently.
Norms
• Norms and values are part of the “non-material” culture.
• Norms are beliefs regarding how to behave and how not to behave (do’s and don’ts).
• People differ in the extent to which they accept and comply with norms.
• They create expectations and criteria regarding the conduct of others.
Explicit vs. implicit culture
• Explicit culture: languages, behavior, know-how, institutions (directly observable)
• Implicit culture: moral values, learning process, beliefs and representations (subconscious)
According to Hoebel…
There are 3 types of cultural norms in terms of behavior:
• 10% of norms are technical: – explicit, logical and transferable; written norms of a society (laws,
technical manuals, rules, etc…)
• 30% of norms are formal: – explicit, moral and transmissible; traditions of a culture; learned
through education (manners, courtesy…)
• 60% of norms are informal:– implicit, instinctive and imitated; sunken part of the iceberg (facial
expressions, body language, cultural perspective on time and space…)
How do these cultural norms influence international business and marketing?
Two levels of cultural diversity in international business
• External cultural diversity– Cultural determinants influencing purchasing and consumption
behaviors (Who buys? What? Where? How? Why?)– Cultural determinants influencing negotiations (relationships
with suppliers, buyers, partners)
• Internal cultural diversity– Observed within all MNCs (identity and corporate culture)– Cultural differences that affect the way subsidiaries work
together
Four levels of culture in marketing
DOMINANT CULTURE
Non-material consumer culture
Material culture of products
(market)
Non-material culture of the firm
(corporate culture)
Transfer of culture
Two main cultural transfer processes:
• Socialization: transfer of culture to new generations; older generation to younger generation; education.
• Acculturation: transfer of culture to adults who have grown up in different cultures, who have been socialized in different cultures; ethnic minorities; multicultural societies.
Cultural transfer and change
SOCIALIZATION
LEARNING BY OBSERVATION
ACCULTURATION
CULTURAL TRANSFER AND
CHANGE, DYNAMIC PROCESS
Agents
Agents
Agents involved in cultural transfer
Agents Age (years) Most important values
Parents 0 Obedience, cleanliness, honesty
Siblings 2 Responsibility, social recognition
Schools, teachers 6 Ambition, capability, logical behavior
Friends 6 Courage, social recognition
Church 6 Honesty, peace, salvation, forgiveness
Sport, clubs 12 Ambition, courage
Mass media 12 Pleasure, intellect
Processes of cultural change• Socialization and acculturation usually imply a
gradual cultural change because transfer agents tend to favor cultural continuity rather than jeopardize their powerful position.
• In contrast, innovative forces are less conservative and may challenge the status quo.
4 processes: cohort effects, age effects, democratization and exclusivation.
Cohort effects• Acceptance of new values and behaviors begins at a
young age.
• These values and behaviors are retained over the years.
• They are spread in society because young people grow older and the “old” values gradually disappear with the extinction of the older cohorts.
• Implies a slow cultural change.
Age effect
• Certain values or behaviors are associated with a particular age group.
• Behaviors are modified as age groups change.
• Age-bound consumer behavior.
• Possible reverse socialization.
Democratization
• Cultural “leveling” or “spreading”
• Cultural differences across social classes decrease.
• Results from an increasing level of general welfare, the influence of mass media and the stress on the equality ideal.
• Mechanisms of democratization: trickle-down, trickle-up, trickle-across.
Exclusivation
• Reverse of democratization
• Occurs less frequently
• Implies limited social spreading of values, goods and behavior.
• Cultural change is limited to a certain group (“elite”, “leading edge”).
Dimensions of culture
• What makes one culture different from another culture?
• How can we compare cultures or cluster cultures according to behavioral characteristics?
• Stereotypes vs. cultural dimensions• Different cultures have different stereotypes of other
cultures.
Ethnocentrism and SRC
Cultural dimension models
• Hall – High-context vs. low-context cultures
• Kluckhohn – Relationship to nature
• Hofstede – Five dimensions of culture
Hall’s cultural model• Focuses on communication patterns found within
cultures
• Four essential dimensions in terms of communication patterns:– Context– Time– Space– Information flow
High-context vs. low-context cultures
Low-context and high-context cultures
• Low-context– Messages are explicit– Words carry most of the information in communication (facts,
data)– Effective verbal communication is expected to be explicit,
direct, and unambiguous
• High-context– Less information is contained in the verbal part of the message – Much more information resides in the context of communication
(background, associations, symbols, basic values of the communicators)
– Verbal mode is only one part of communication, nonverbal is often seen as having greater importance
Degree of context of cultures: comparison of law (US and France)
Time
• Different cultures have different concepts of time. This can explain differences in behavior.
• Dimensions of time:– Closure: a task must be completed, if not perceived as
“wasted”– Long-term vs. short-term thinking– Orientation toward past, present or future– Linear or circular (tangible or intangible)– M-time and P-time– Cause and effect– Time as symbol (“time is money”, efficiency, waiting,
discretionary time)
A few examples…
Factors High-context Low-context
Lawyers Less important Very important
A person’s word To be trusted « Get it in writing »
Responsibility for error Taken by the highest level Pushed to the lowest level
Space People breathe on each other
People maintain a bubble of private space
Time Polychronic, circular Monochronic, linear
Negotiations Are lengthy Proceed quickly
Competitive bidding Infrequent Common
Examples Japan, China, Middle East US, Germany, Switzerland
Kluckhohn’s cultural model
3 types of relationships between humanity and nature:– Mastery-over-nature (man is to conquer nature)– Harmony-with-nature (man is to live in harmony with
nature)– Subjugation-to-nature (man is dominated by nature)
Further developed with: nature of people, duty, mode of activity, privacy of space, temporal orientation…
Humanity and Nature
Mastery-over-nature Harmony-with-nature Subjugation-to-nature
-Humanity is separate from nature
-Nature should be controlled
-“To move a mountain”
-No distinction between humanity, nature and supernatural
-Communion, exchange, subtle intimacy
-Identification with nature
-People are dominated by nature
-Supernatural forces play a dominant role in religion
-Nothing can be done to control nature
“Western” world,
North America
Asia, Japan Africa, South America
Use in international marketing?
Hofstede’s cultural model• Hofstede’s 4D or 5D model
• Quantitative and longitudinal study of cultural differences between countries
• Why some concepts of motivation do not work in all countries in the same way
• “Culture’s Consequences” and “Cultures and Organizations: Software of the Mind”
• Scores for each country explain why people and organizations in various countries differ, comparative data.
Reference in international business and international marketing
How do we measure cultural distance?
Geert Hofstede’s Cultural Index
- National character survey
- 116.000 IBM employees
- 72 countries and 20 languages
Five different poles make up the cultural index:
- Power distance
- Uncertainty avoidance
- Individualism
- Masculinity
- (Long term orientation)
Original scores for 56 countries,
extended to nearly 90
5D Model
0
100
100
100
100 100
PDI
UAI
IDVMAS
LTO
Work-related values to consumption-related values
Power distance (PDI)
• High PDI vs. Low PDI
• “the extent to which less powerful members of a society accept and expect that power is distributed unequally”
• Reflected in the values of both the less powerful and more powerful members of society
• Influences the way people accept and give authority
• Shows class or social structure
• Focuses on the degree of equality, or inequality, between people in the country’s society
Uncertainty avoidance (UAI)
• High UAI vs. Low UAI
• “ the extent to which people feel threatened by uncertainty and ambiguity and try to avoid these situations”
• Strong UAI = need for rules and formality to structure life, search for truth and belief in experts
• Conflict and competition are threatening
• Higher level of anxiety, show of emotions is accepted
Individualism (IDV)
• Individualistic vs. Collectivistic
• “people looking after themselves and their immediate family only, versus people belonging to in-groups that look after them in exchange for loyalty”
• “I”-conscious and “we”-conscious
• Focuses on the degree the society reinforces individual or collective achievement and interpersonal relationships
• Distinguishes between societies where the group and being a member is important (collectiveness) and societies where the group is less important (individualism)
Masculinity (MAS)
• Masculine vs. Feminine
• “the dominant values in a masculine society are achievement and success; the dominant values in a feminine society are caring for others and quality of life”
• Focuses on the degree the society reinforces, or does not reinforce, the traditional masculine work role model of male achievement, performance, control and power
• Shows the importance of status in societies
• Indicates the degree of gender differentiation and the importance of masculine values (assertiveness, money, material goods, success…)
Long-term orientation (LTO)• Long-term vs. Short-term orientation
• Chinese value survey, “Confucian dynamism”
• “the extent to which a society exhibits a pragmatic future-oriented perspective rather than a conventional historic or short-term point of view”
• High LTO = perseverance, ordering relationships by status, thrift, sense of shame, family ties, long-term thinking, paternalism
• Focuses on the degree the society embraces, or does not embrace, long-term devotion to traditional, forward thinking values
• Indicates whether the country prescribes to the values of long-term commitments and respect for tradition
Examples of Hofstede’s Dimensions
Some country examplesCountry PDI UAI IDV MAS LTO
Australia 36 51 90 61 31
Belgium 65 94 75 54
Denmark 18 23 74 16
France 68 86 71 43Germany 35 65 67 66 31
Great Britain 35 35 89 66 25
India 77 40 48 56 61
Italy 50 75 76 70
Japan 54 92 46 95 80
Netherlands 38 53 80 14 44
Spain 57 86 51 42
USA 40 46 91 62 29
World average
57 65 43 49 50
Comparison of cultural dimensions
More information on www.geert-hofstede.com
American culture
• Classical dimensions: M-time culture, linear time-pattern, low-context, low PDI, individualistic, high MAS, low UAI, short-term orientation
• Other dimensions: success, obsession with change (new and better), credit card culture, education for competitiveness, independence, ethnocentrism, strong role differentiation, innovativeness, creativity, private opinions expressed, education teaches students to be critical (ask “why” not “how”), man must conquer nature, (De Mooij)
Japanese culture
• Classical dimensions: P-time culture, circular time concept, high-context, high PDI, collectivistic, masculine, strong UAI, long-term orientation
• Other dimensions: pressure to behave like neighbors, shame-based society, avoid jolting social harmony, dependence, private opinions not expressed, status is important (success) but avoid standing out in a crowd, cash culture, thrift and perseverance, strong role differentiation, education (“how” instead of “why”), education has an intrinsic value, obsession with cleanliness, harmony with nature… (De Mooij)
Limits to Hofstede’s model
• Generalization, reductive, simplistic (unproven and unprovable, flawed assumptions, “storytelling”…)
• Original objective: how values in the workplace are influenced by culture
• Three discrete cultures– Organizational– Occupational– National
• Questionnaire – quantitative data
• Differences in location – intracultural differences, subcultures
?
Intracultural differences
• Few cultures are homogeneous in terms of cultural traits and norms
• Consequence of globalization?
• Intracultural differences (nationality, religion, race, language or geographic areas) result in the emergence of distinct subcultures
• Existence of cross-cultural and intracultural differences: opportunities and threats
To summarize on culture…
• Culture is complex and multi-dimensional, but classification is important in business
• Cultural distance is essential in international marketing
• Culture influences perceptions and drives how we communicate and what we communicate
• SRC and ethnocentrism can explain the failure of many companies in the international arena
• Acculturation (adjusting and adapting to a specific culture other than one’s own) is one of the keys to success in international operations
How does culture affect international marketing?
• Languages and the use of language in communicating, advertising, negotiating…
• Marketing research is much more difficult to conduct from a methodological perspective
• Buying patterns and behaviors will vary in different cultural contexts
• Marketing mix will be perceived differently from one country to another
• Management styles will be directly related to culture…
Marketing and cultural differences
Marketing area Influence of cultural differences
Consumer behavior Decision-making, cross-cultural attitudes, local vs. global
Marketing research Cross-national equivalences
Global marketing strategy Global strategy vs. customized strategy
Segmentation & targeting Inter-national (regional, global) vs. intra-national
Product policy Adapt or standardize product attributes
Brand image Brand perception, country of origin, “made in”
Pricing policy Price-quality ratio, influence of price in decision-making
Distribution channels Type of channel, distributor relationships
Communication Values, visions of the world, communication styles
Advertising Advertising messages, symbols, adaptation of strategy
Sales Sales force management, PR, corruption, ethics
Negotiation Negotiation strategies, process, results, styles…
Source: Usunier
Culture’s consequences on international marketing
• Marketing research (understanding consumers)
• Segmentation (classifying consumers)
• Product policy (satisfying consumers)
• Distribution channels (reaching consumers)
• Advertising (communicating with consumers)
Chapter 2
International Marketing Research
International marketing research
• Review of marketing research techniques
• Specific problems in international markets
Review of marketing research techniques
• General principles of marketing research
• Qualitative research
• Quantitative research
What is marketing research?
Marketing research is the link between the marketer and the market…
It is the starting point of marketing…
Marketing research is the systematic design, collection, analysis, and reporting of data and findings relevant to a specific marketing situation facing the company.
MIS: consists of people, equipment, and procedures to gather, sort, analyze, evaluate, and distribute needed, timely, and accurate information to marketing decision makers.
Marketing process
Understand the
marketplace and customer
needs and wants
Design a customer-
driven marketing strategy
Construct a marketing
program that delivers superior
value
Build profitable relationships and create customer
satisfaction
Capture value from
customers to create profits
and customer
quality
Create value for customers and build customer relationships
Capture value from customers in return
Marketing
technology
Global
markets
Ethics and
social responsibility
Position of marketing research
ANALYSIS
PLANNING
IMPLEMENTATION
CONTROL
MARKETING RESEARCH
MARKETING STRATEGY
MARKETING RESEARCH
Marketing research goals
• UNDERSTAND
• DESCRIBE
• EXPLAIN
• MEASURE
• FORECAST
• VERIFY
Product, consumer, distributor, competitor, environmental analysis
Marketing research process
Define problem and research objectives
Develop the research plan
Collect the informationAnalyze the information
Present the findings
Research design• The research design formally describes the characteristics of
the survey and the procedures used to conduct the study.
• It is the methodological framework of the research.
• Contents:– Goals– Information sources– Variables– Survey method– Sampling method– Data analysis– Calendar– Budget
Internal validity
External validity
Types of marketing research
EXPLORATORY
DESCRIPTIVE
CAUSAL
-Documentary
-Qualitative
-Documentary
-Quantitative
-Experimentation
-Observation
Research methods• Observational research
- Audit: inventories, facing, pantry check…- Mechanical: scanning, EDI, eye camera…
• Experimental research- Product/concept tests: prototype, comparative or
not- Market/store tests: laboratory stores, catalog
sales, mobile stores, in-store tests, city tests…
• Ad hoc research- Qualitative research: interviews, focus groups…- Quantitative research: surveys, opinion polls…
Qualitative and quantitative research
• The distinction between qualitative and quantitative research depends on the nature of the research problem.
• If “why?” or “how?”
QUALITATIVE RESEARCH
• If “how many?” or “how much?”
QUANTITATIVE RESEARCH
Information Sources
• Secondary sources: Existing data. All forms of documentary research.
DESK RESEARCH
• Primary sources: Data collected for a specific situation at company’s request.
FIELD RESEARCH, AD HOC
• These sources can be internal or external.
• The choice will depend on the marketing problem, objectives, resources…
Documentary Research
• First step to marketing research
• 4 steps– Define the topic (clear, feasible, pertinent)– Identify key words associated to the topic– Search for available sources of information– Consult, sort and summarize information
• Questions to ask– Does the data correspond to the situation?– Is there a risk of obtaining biased information?– Was the research design technically coherent?– Are the findings clear, precise…?
Research and polling institutes
• These institutes collect information for resale.
• They can give 2 types of information:– Standardized periodic information: panels,
longitudinal studies. Firms subscribe to this information. This is a secondary information source.
– On-order studies: reserved solely for one company or omnibus studies. This is a primary information source.
Advantages and disadvantages of information sources
Secondary Primary
Advantages Low in cost
Diversity
Available
Problem definition
Familiar with market
Adapted information
Recent, up-to-date
Not available to competitors
Disadvantages Incomplete, outdated
Inadequate
False information
Difficult to control
Costly
Difficult to collect
Time consuming
Sequence and relationship between different sources of information
SECONDARY SOURCES
(Desk Research)
Internal External
PRIMARY SOURCES
(Field Research)
Qualitative Quantitative
Qualitative marketing research
What is qualitative marketing research?
• Collecting and analyzing psycho-sociological elements which explain facts, attitudes, opinions, motivations and behaviors of all people involved in a given marketing situation
• Qualitative research methods are used for in-depth exploratory studies of the decision-making process and psychological mechanisms that affect individual or group behavior
Why use qualitative research?
• Qualitative research studies lead to understanding the causes or the basis for behaviors, attitudes and opinions.
• They are often based on analyzing how a product or company is perceived by individuals or consumers.
• However, results cannot be extrapolated. They cannot be considered as being representative of the entire population. Sample size = 10 - 70
Qualitative research is used in the following cases:
• Defining the marketing problem is difficult (explore market)
• Finding causes, decision-making criteria of consumer behavior
• Secondary information is insufficient• Constructing questionnaire for a survey• Explaining surprising results of quantitative
research• Promoting creativity
Advantages and disadvantages of qualitative research
Advantages Disadvantages
-Quick and flexible (maximum 70 people)-Less costly-Allows exploration-Attitudes, motivations, opinions are studied-Reveals deep feelings and thoughts
-Non-representative sample-Research design is difficult to plan-Quality of the study depends on researcher skills
Different types of qualitative research
• Two ways of classifying qualitative studies:
– Degree of induction (level of consciousness)• Unstructured interview (pure exploration)
• Centered or focus interview (exploration and in-depth analysis)
• Structured interview (identification and verification)
– Number of people being interviewed• Individual
• Group
Choosing a Type of Interview
OPINIONS
ATTITUDES
MOTIVATIONS / BELIEFS
Structured interview
Centered or Focus interview
Unstructured interview or
centered with projective tests
Levels of consciousness
Unstructured interviews
• Conducted in a face-to-face situation
• Large, ambiguous opening
• Funnel approach
• The respondent is free to express his feelings as wishes and for as long as he wishes
• Non-directive, but reformulation techniques
• Use in marketing
Unstructured interviewing steps
Present research objectives
Large opening statement or questions
Researcher adopts a non-directive attitude
Reformulation techniques (« mirror effect »)
Respondent goes further in-depth « auto-exploration »
Centered or focus interviews
• Same general structure and basic principles as the unstructured interview
• However, an interview guide is used
• This guide is composed of topics or questions to be addressed during the interview
• The interviewer will bring up topic if and only if respondent does not spontaneously address issues
• This is NOT a questionnaire (no order, modifications possible, different versions allowed)
• This is the most popular form of qualitative research
Projective techniques
• Used to avoid psychological obstacles (taboos, reluctance, courtesy bias, subconscious…) or to go further in-depth
• Visual or written stimuli
• The respondent will overcome hesitations
• Difficult to analyze, ambiguous
• Different tests– Word association– Sentence completion– Story completion– Frustration or cartoon test– TAT (Thematic Apperception Test)– Haire test
Example – Nescafé (Haire test)
List 1
• 1 lb. of carrots
• Roast beef
• 1 can of Delmonte corn
• Heinz ketchup
• Folgers ground coffee
• Tide laundry detergent
• 3 onions
List 2
• 1 lb. of carrots
• Roast beef
• 1 can of Delmonte corn
• Heinz ketchup
• Nescafé instant coffee
• Tide laundry detergent
• 3 onions
? ?
Structured interviews
• Most directive method in qualitative marketing research
• A questionnaire is used
• However, the questionnaire is only composed of open-end questions
• Questionnaire facilitates the research process as well as analysis
• Confusion between qualitative and quantitative research
• It is theoretically incorrect to extrapolate or generalize the findings
Focus groups
• Nearly always use the centered approach (interview guide, group discussion is directed by interviewer)
• About 7 to 10 participants per group
• The role of the interviewer is very important
• Interviewer must manage the group in terms of participation, conflict, domination, summaries, etc…
• Organization and logistical aspects
Focus group phases
• Three phases during the group interview:
– Presentation (warming up): explanations, rules of the game, individual introductions, anonymous responses…
– Exchange: each participant gives his or her opinions, thoughts, group dialogue, tests…
– Summarize: verify all topics of interview guide, repeats, star technique (circept), gift…
Comparing different types of interviews
• Unstructured : large opening statement and non-directive attitude (≈ 500 to 800 €)
• Centered : interview guide to « center » discussion (≈ 250 to 500 €)
• Structured : qualitative questionnaire (≈ 150 to 200 €)
• Focus group : centered interview, 7 to 10 participants per group (≈ 5000 to 8000 €)
Comparing individual interviews and focus groups
Advantages Disadvantages
Individual interview
-Personal, in-depth questions
-Lower cost per respondent
-Only solution in some cases (B to B, competitors)
-Researcher training
-Analyzing findings
-Long to conduct
Focus groups
-More information during discussion
-Quicker to conduct
-Possible to study interactions and influences during the decision process
-Stimulate ideas and creativity
-No in-depth motivations
-Risk of conformity, strong group influence
-Organizational and logistic difficulties
Qualitative sampling
• No representative sample, but variety of individuals is important
• No important profiles should be excluded
• Sequential procedure (arborescence) is used:– List of criteria explaining differences of behavior– Rank criteria from most important to least important– List possibilities for each criteria– Build arborescence– Verify coherency of arborescence
Sampling in focus groups
• Same basic principles (arborescence)
• All participants must feel “equal”
• However, there are two important rules:– Group must be heterogeneous (cover all of the
profiles of the populations)– Group must be homogeneous (for criteria that
may lead to an unbalanced group)
Many groups may be need to be organized in order to avoid unbalanced groups or inter-group pressure
Qualitative data analysis
Two different methods can be used:
– Summaries of interviews, “verbatims”
– Content analysis• Requires re-transcribing of all interviews
• Specialized software
• Quantification, scientific rigor
• Time and budget
Quantitative marketing research
Differences compared to qualitative research
• Associated with descriptive research• Objectives are different: verify, measure, estimate... • Sampling methods are different• Large sample size (300 – 1000+)• Methods of administration change• Precision of an estimation, margin of error• Data analysis is more sophisticated
Advantages and disadvantages of quantitative research
Advantages Disadvantages
-Delivers precise numerical estimations (forecasting, market share, intentions…)
-Extrapolation possible
-Representative sample
-Superior objectivity
-Statistical techniques
-Inter-group comparisons
-Longitudinal studies
-Does not explain why or how
-Precision tool, not a discovery tool
-Self-report data
-Broad but shallow data
-Long and costly
-Difficult in B to B
-Participation is unrewarding (direct marketing)
Categories of quantitative research
• Census– Collect information from each member of the
population– Complete canvass of the population– Depends on the size of the target population
• Survey– Most familiar of all market research methodologies– Collect information from a portion of the population– Procedure in which a fixed set of questions is asked of
a sample of respondents– On the basis of information collected on the subset, it is
possible to infer something about the larger group– Inference depends on the sampling method
Census vs. Survey
• Census: n = N
• Survey: n/N = subset of the population, survey rate or sampling rate
• Exhaustive or non-exhaustive survey
Generalization and extrapolation of findings
Validity of quantitative research
• Representative sample sampling method and response rate
• Precision sample size and margin of error
• Quality of questionnaire and administration
• Researcher training and experience
• Quality of information processing
• Quality of data analysis
What is sampling?
n
70%
N
70% + e
Sampling is necessary every time the population size is too large to be able to collect information from all elements of the population.
Probability vs. non-probability sampling
• Probability– Each population element has a known, non-zero chance of being
included in the sample– Final elements are selected objectively by a specific process– Equal probabilities are not necessary– Allow an assessment of the amount of sampling error likely to
occur– Requires an exhaustive sample frame
• Non-probability– No way of estimating that probability that any population element
will be included in the sample– Rely on personal judgment somewhere in the process– Statistically, precision (sampling error) cannot be evaluated
Quantitative sampling methods
• Simple random sample• Cluster sample• Area sample• Level random sample• Stratified random
sample
• Quota sample • Random route sample• Judgment sample (on-
the-spot sample)• Convenience sample
PROBABILITY
SAMPLES
NON-PROBABILITY
SAMPLES
Probability sampling
• SRS: each population element has a know and equal chance of being selected; central-limit theorem (when n is large, the sample mean will be normally distributed).
• Cluster and area: first parent population is divided into mutually exclusive and exhaustive subsets, then a random sample of the subset is selected.
• LRS: random sampling occurs at several different levels of the population.
• Stratified: population is divided into strata or subpopulations and random sampling occurs in each stratum (proportionate and disproportionate).
Non-probability sampling• Quotas: attempt to ensure that the sample is representative
by selecting sample elements in such a way that the proportion of the sample elements possessing a certain characteristic is approximately the same as the proportion of the elements with the characteristic in the population.
• Random route: each field worker is given a random route to follow, leading to the selection of people to interview.
• Judgment: sample elements are handpicked because it is expected that they can serve the research purpose and it is believed that they are representative of the population of interest (purposive samples).
• Convenience: sometimes called accidental samples because those composing the sample enter by accident (volunteers, radio shows…)
Choosing a sampling method
Do we have a sample frame?
Is SRS too costly?
Is the population stratified?
SRSStratified sample
Do we have a frame of clusters?
Is it too costly?
Cluster or area sample
Are there frames at different levels?
Level random sample
Yes No
No
No Yes
YesYes No
Yes
No YesNo
Do we know the structure of the population for several variables that
explain differences in behavior?
Quota sample
Yes No
Is the population widely dispersed?
Random route
No
Are there mandatory passage
points?
Judgment or on-the-spot
sample
Snowball or other convenience
sample
Yes No
Yes
Sample size and precision
• With probability samples, precision and minimal sample size can be determined
• Sample size must be greater than 30
• Estimation, confidence level, confidence interval and margin of error
• Probability sampling methods or Kish coefficient
• Precision of an estimation is not proportional to sample size, but to the square root of the sample size. To double precision, the sample size must be multiplied by four.
Sample size and margin of error
n = t pq
e
2
2
Non-exhaustive sample
n’ = (n x N) / (n + N) Exhaustive sample
e = t √pq
nMargin of error for probability samples
n = budget – fixed costs direct cost per unit
Budget approach
Procedure for developing a questionnaire• Specify what information will be collected
• Determine type of questionnaire and method of administration
• Determine content of individual questions
• Determine form of response to individual questions
• Determine wording of each question
• Determine sequence of questions
• Determine physical characteristics of questionnaire
• Reexamine and revise
• Pretest questionnaire and revise if necessary
Type of questionnaire and method of administration
• These two decisions are interdependent
• The length of the questionnaire will influence the choice of the method of administration
• Self-administered questionnaires (mail, Internet, questionnaire in magazine, etc…): response rate is generally low (< 20%)
• Questionnaires completed with researcher (direct personal interviewing, phone): longer questionnaire and higher response rate (50%)
Form of response• Open-ended• Dichotomous: 2 possible answers• Multiple choice: 3 or more possible answers• Likert scale: a statement with which the respondent shows the
amount of agreement or disagreement (strongly agree – strongly disagree)
• Semantic differential scale: a scale connecting two bipolar words, respondent selects the point that represents his/her opinion (enthusiastic – unenthusiastic)
• Importance scale: rates the importance of some attribute (extremely important – extremely unimportant)
• Rating scale: rates some attribute from “poor” to “excellent”• Intention-to-buy scale: describes respondent’s intention to buy a
product or service (definitely buy – definitely not buy)
Avoid halo effect (change direction in scales to avoid repetition)
Question wording
• The phrasing of a question can directly affect the responses.
• General rules:– Use simple words– Avoid technical vocabulary in consumer research– Avoid double negations– Avoid ambiguous words and questions– Avoid leading questions– Avoid double-barreled questions
• Examples
Question sequence
General rules:• Questionnaire should be very logical and easy to
respond to.• Use simple, interesting opening question.• Use the funnel approach (start with broad questions
and progressively narrow down in scope).• Avoid jumping around from topic to topic.• Use transitions.• Design branching questions with care.• Place difficult or sensitive questions late in the
questionnaire.• Ask for classification information last.
Question sequence
Knowledge and awareness questions
Factual behavior questions
Attitude questions
Intention questions
Classification questions
Questionnaire pretest
• Data collection should never begin without an adequate pretest of the instrument.
• Can be used to assess both individual questions and their sequence.
• Small sample of 10 to 30• Questionnaire followed by interview to identify
problems and misunderstandings• Pretest results are not included in the final results of
the survey
“The pretest is the most inexpensive insurance the marketer can buy to ensure the success of the questionnaire and the entire research project”
Quantitative data analysis
• Univariate analysis descriptive statistics and graphical information
• Multivariate analysis cross-tabulations, Chi square tests, correlation analysis, multiple regression analysis, cluster analysis (perceptual mapping), factor analysis….
Cost factors affecting surveys
• Sample size
• Accessibility
• Survey length
• Analysis
≈ 100 € per respondent
Specific problems in international markets
General context of international marketing research
• Globalization, but change at different rates in different parts of the world
• Challenge of conducting high quality research as quick as possible in multiple diverse settings
• Research conducted simultaneously in developed and developing world
• Unbalanced spread of marketing research expenditures
• Multi-faceted issues (where, how, who, tools, comparisons…)
• New technologies (CATI, CAPI, scanners, Internet…)
3 specific problems in international marketing research
• Who will conduct the research? degree of research centralization
• Is the information comparable? cross-cultural research equivalences
• What are the sources of bias? five bias types
Who will conduct international marketing research?
• The firm can use internal or external research services.
• The unknown competitive situation and different cultural backgrounds complicate the choice between internal and external research.
• Problem: exclusive contracts with marketing research firms…
• To what degree should international marketing research be centralized?
• Three choices: internal marketing department, domestic research firm, foreign research firm
The degree of centralization of international marketing research
Access to information
Information sources
Quality and reliability of information
Adaptation to firm’s problem
Monitoring Cost
Internal marketing department
Low access.
Network problem.
Competitive analysis difficult.
Limited knowledge of
sources in foreign market.
Risk in terms of analysis. Language problems.
Cultural bias.
Excellent. Excellent. Low in cost. Travel
expenses and use of staff.
Domestic research firm
Good if the firm has an important
local network.
Excellent in France. Perhaps
limited in foreign market.
Risk in terms of analysis. Language problems.
Depends on the informal
network.
Very good. Easy to
clarify if problems.
Good. Easy to monitor
during the research process.
High in cost. Specific
project fees.
Foreign research firm
Very good. Low risk of
ignoring essential
information.
Excellent in foreign
market, but only local.
Excellent. Limited. The firm may be unknown.
Limited. Risk of non-
conformity with initial objectives.
Variable.
Is the information comparable?
• This question is very important in cross-cultural or comparative studies.
• Some words, ideas, concepts, practices, etc… will have different meanings in different cultural contexts.
• Research equivalence is necessary, but not always easy to achieve.
• Equivalences must be verified before conducting research on “foreign” consumer behavior.
International equivalences
• Functional equivalence: do products serve the same function?
• Conceptual equivalence: do relevant concepts have the same meaning and/or importance?
• Category equivalence: does the product belong to the same category or domain?
• Translation equivalence: cross-check, translation-retranslation
• Metric equivalence: scaling, odd/even, do adjectives have the same strength and distances?
• Respondent equivalence: who should answer questions? same social role? sampling unit…
• Sampling frame equivalence: how will sample be chosen?
Sources of bias
• Bias = distorted results, incorrect or false compared to reality…
• Biased responses are more likely to occur in international marketing research than in domestic research and are harder to avoid
• Importance of control, pre-test, acculturation…
• Research plans must be adapted to reduce the risk of biased responses
5 sources of bias
• Courtesy bias: concerns the social desirability of answers, the respondent hopes to please the interviewer
• Subject bias: concerns the way a society perceives an issue as being more or less sensitive
• Cultural-trait bias: a given cultural trait can alter the findings (IDV, MAS…)
• Response style bias: some responses are more or less extreme in some cultures (scaling, ranking), coefficients
• Non-response bias: non-response style varies according to country, gender, race…
Practical consequences in international marketing…
• Qualitative research only accounts for less than 20% of research expenditures around the world (emerging markets, innovation, brand renewal…), but this is increasing
• Length of interview and compensation will vary from one market to the other (monochronic and low-context = shorter interviews and larger compensation)
• Some techniques are unknown or unfeasible (projective techniques, on-line surveys, CAGI/CATI…)
• Focus groups are very culture-bound (collectivistic vs. individualistic societies, social status, disagreement…)
• Sampling techniques are limited (reliable information is not widely available, statistics, sampling base…)
• Collecting information is difficult (level of economic development, illiteracy, local authorizations…)
• Cross-cultural research is limited (comparison is difficult, concepts/rituals…)
• Recent developments in international marketing research
Chapter 3
International Marketing Strategy and Programs
Expanded marketing process model
Understand the marketplace
and customer needs and
wants
Design a customer-driven
marketing strategy
Construct a marketing
program that delivers
superior value
Build profitable relationships and create customer
satisfaction
Capture value from
customers to create profits and customer
quality
Create value for customers and build customer relationshipsCapture value
from customers
Research consumers and
market
Manage marketing
information and customer data
Select customers to serve:
segmentation and targeting
Decide on a value proposition:
differentiation and positioning
Product and service design:
build strong brands
Pricing: create real value
Distribution: manage
demand and supply chains
Promotion: communicate VP
CRM and CEM: build strong
relationships with chosen
customers
Partner relationship
management: build strong
relationships with marketing partners
Create satisfied loyal
customers
Capture customer
lifetime value
Increase share of market and
share of customer
Marketing technology Global markets Ethical and social responsibility
Corporate strategy vs. marketing strategy
SBU SBU SBU
Core market
S1 S2 S3
Target segment
Positioning
Marketing mix
Strategic segmentation
Strategic positioning
Market segmentation
Market targeting
Market positioning
-Sales objectives
-Budgets
-4 Ps
Consumer preferences
Competitor positioning Firm advantages
Market segmentation
• What is it?– Identifying and profiling distinct groups of buyers who
might require separate products and/or marketing mixes– Clustering consumers in terms of behavior, needs,
attitudes, opinions…
• Why?– Buyers/consumers differ in many ways– They do not respond to the same stimuli in the same way– So, different offers for different types of buyers
• Market segmentation represents an effort to increase a company’s targeting precision.
Levels of market segmentation
• Mass marketing– Mass production, distribution and promotion of one product for all buyers– Largest potential market, “one size fits all”– Lowest costs = lower prices or higher margins
• Segment marketing– Large identifiable group within a market– Buyers differ in their wants, purchasing power, location, attitudes and habits…but the company
is not willing to customize its offer to each individual customer– More appropriate products and services, distribution and communication easier, fewer
competitors
• Niche marketing– More narrowly defined group, a small market whose needs are not being well served– Smaller companies can become more competitive through specialization– Better understanding of customers who willingly pay a price premium
• Individual marketing– Segments of one, customized marketing, one-to-one marketing…– More frequent in B to B than in B to C– New technologies allow “mass customization” ; ability to prepare on a mass basis individually
designed products and communications to meet each customer’s requirements
Market segmentation procedure
Market segments and niches can be identified by applying successive variables to subdivide a market. 3 steps:
• Research stage: gain insight into consumer motivations, attitudes and behavior and collect important data (attributes and ratings, brand awareness and rating, product-usage patterns, attitudes toward product category, customer characteristics…).
• Analysis stage: factor analysis to remove highly correlated variables and cluster analysis to create a specific number of maximally different segments.
• Profiling stage: each cluster is profiled in terms of its distinguishing attitudes, behavior, customer characteristics…
Market segmentation must be redone periodically because market segments change over time, especially in international markets
Segmentation variables
Consumer characteristics Marketing characteristicsGeographic
-Nations
-States
-Regions
-Cities…
Demographic
-Age and life-cycle stage
- VALS or psychographics
-Gender
-Income
-Generation
-Social class…
-Consumer responses to benefits sought, use occasions or brands
(consumer-response segments)
-Hierarchy of attributes in choosing a brand, shifts in consumer priorities
(market partitioning)
-Marketing mix variables: product, price, placement, promotion
(price-quality-type dominant)
In international marketing, broader market segments compared to domestic segments, transnational segments
Example 1: culture-based segmentationSize
(million)PDI UAI IDV MAS Marketing implications
Cluster 1
Austria, Germany, Switzerland, Italy, GB, Ireland
203 Small Medium Medium-High
High Preference for “high performance” products, use “successful-achiever” them in advertising, desire for novelty, variety and pleasure, fairly risk-averse market.
Cluster 2
Belgium, France, Greece, Portugal, Spain, Turkey
182 Medium Strong Varied Low-Medium
Appeal to consumer’s status and power position, reduce perceived risk in product purchase and use, emphasize product functionality.
Cluster 3
Denmark, Sweden, Netherlands, Norway
37 Small Low High Low Relatively weak resistance to new products, strong consumer desire for novelty and variety, high consumer regard for “environmentally friendly” marketers and socially conscious firms.
Example 2 : segmentation of CEE markets
• « Marketization »: – Countries’ exposure to global communications, increased
product availability and variety, and overall attempt to close the living standards gap with developed countries
– Reflects a set of institutional values and cultural requirements for the operation of effective private markets (materialistic values as a stimulus for greater production, competition, freedom of information…)
• « Westernization »: – Countries’ proximity to the West– The duration and the extent of their openness to Western
influence and culture
CEE clusters
High Marketization
Low Marketization
Low Westernization
High Westernization
Cluster 1
Cluster 2
Cluster 3
Cluster 4
Source: Lascu, Manrai and Manrai
Clusters are likely to have common characteristics
and share similar consumer needs and purchasing behavior
Central and Eastern European clusters
• Cluster 1: High-marketization and high-westernization (Hungary, Poland, Czech and Slovak Republics, Slovenia)
– Geographic: Central Europe, border developed countries, more urbanized– Cultural: Slavic languages (except Hungary), primarily Catholic religion– Economic: more developed
• Cluster 2: Low-marketization and high-westernization (Bosnia, Serbia, Croatia, Montenegro, Macedonia)
– Geographic: Central Europe, more urbanized– Cultural: Slavic languages, primarily Eastern Orthodox and Muslim– Economic: more developed, but less than cluster 1
Central and Eastern European clusters
• Cluster 3: High-marketization and low-westernization (Bulgaria and Romania)
– Geographic: Balkan peninsula, urbanized to a lesser extent than cluster 2– Cultural: Latin and Slavic languages, Eastern Orthodox religion– Economic: slower in the development process
• Cluster 4: Low-marketization and low-westernization (Albania and Western countries of the former Soviet Union)
– Geographic: Less urbanized than cluster 3– Cultural: Slavic languages (Russian is the primary commercial language), Eastern
Orthodox and Muslim– Economic: formerly “fierce” dictatorships, slower development
Market targeting
After identifying different markets and market segments, the firm must:
• Evaluate the various segments
• Decide how many and which ones to target
Evaluating the market segments
• Overall attractiveness of the segment– Size, growth, profitability, scale economies, low risk…– How easy is it to persuade buyers to shift their
purchases (consumers, relative non-consumers, absolute non-consumers)?
– Brand loyalty vs. dissatisfied buyers
• Company’s objectives and resources– Do segments correspond to the company’s long-term
objectives?– Does company possess the skills and resources needed
to succeed in the segment?– The company should only enter market segments in
which it can offer superior value
Selecting market segments
5 different target market strategies:
• Single-segment concentration– Concentrated marketing– Strong knowledge of segment’s needs– Strong market position in segment– Economies through specialization = high returns– Risks are higher than normal
• Selective specialization– Several segments that are objectively attractive– Little or no synergy among segments but each is
profitable– Diversification of firm’s risk
Selecting market segments
• Product specialization– Concentrate on certain product to several segments– Strong reputation in specific product area– Risk of technology
• Market specialization– Concentrate on serving many needs of a particular customer group– Strong reputation with group, channel for all new products– Risk of decreased buying power in the group
• Full market coverage– Serve all customer groups with all products they need– Limited to very large firms– Undifferentiated: ignore segment differences, one offer for entire market– Differentiated: operate in several segments with different programs for each
Market positioning
• Market positioning: act of designing the company’s offering and image so that they occupy a meaningful and distinctive competitive position in the target customer’s mind; refers to the consumer’s perception of a product or brand amongst other brands
• Objective: attaining a prominent place for company’s brand amongst other brands in the minds of consumers
• Positioning mainly results from marketing communication regarding brands, social communication and personal experience
• Categorization and positioning within category
Product differentiation, international coherency
Importance of product differentiation
Market segmentation
Product differentiation
Demand side
Heterogeneous markets are divided into homogeneous
submarkets
(market segmentation)
Supply side
Homogeneous products can be differentiated into products tuned to these homogeneous market
segments
(market positioning)
Differentiation attributes
Product Services Personnel Channel Image
Features
Performance
Conformance
Price
Quality
Durability
Reliability
Repairability
Style
Design
Ordering ease
Delivery
Installation
Customer training
Customer consulting
Maintenance Warranty
Competence
Courtesy
Credibility
Reliability
Responsiveness
Communication
Coverage
Expertise
Performance
Value proposition
Emotional power
Symbols
Media
Atmosphere
Events
Different attributes in different markets, cultural influence
Promoting the difference
• How many difference should a firm promote?
• USP: “best quality”, “best service”, “lowest price”, “best value”, “safest”, “fastest”, “most convenient”, “most advanced technology”…
• Double-benefit positioning: if two or more firms are claiming to be best on the same attribute, search for special niche within the target segment, two benefits must be compatible (“safest” and “most durable”)
• The number of differences should be limited (communication, clarity, credibility)
• Coherency in international markets is essential, between markets and between segments
Communicating the firm’s positioning
• Once positioning strategy chosen, the firm must communicate the positioning effectively
• Mentally distinguish offerings, enter into the minds of consumers
• Communication through physical signs and cues
Marketing mix is used to communicate the company’s positioning
From marketing strategy to marketing programs
• Marketing strategy must be implemented through marketing programs
• Managers must decide on marketing expenditures, marketing mix, and resource allocation– Internal cultural diversity– External cultural diversity
• Marketing mix allows firm to communicate and implement its strategy, formalized in marketing plan
Marketing mix
• Marketing mix is the set of marketing tools that the firm uses to pursue its marketing objectives in the target market.
• 4 Ps (McCarthy):– Product– Price– Promotion
– Place
4 Cs (Lauterborn)-Customer needs and wants
-Cost to the customer
-Communication
-Convenience
The four P’s of the marketing mix
Product Product variety, quality, design, features, brand name, packaging, sizes, services, warranties, returns…
Price List price, discounts, payment period, credit terms…
Promotion Sales promotion, advertising, sales force, public relations, direct marketing…
Place Channels (direct, indirect, exclusive, selective, intensive), coverage, assortments, locations, inventory, logistics, transport…
Standardization vs. adaptation• Debate in marketing since Buzzell (1968) and Levitt (1983)
• Factors encouraging standardization– Economies of scale in production– Economies in R&D– Economies in marketing– Global competition– “Shrinking” of world market– “Converging, homogeneous cultures”
• Factors encouraging adaptation– Differing use conditions– Government and regulatory influences– Local competition– Differing consumer behavior patterns– “True” to marketing concept
Degree of standardization,
Degree of adaptation, global/local
paradox
Need for adaptation
Degree of cultural
grounding
High
Low
Nature of product
Industrial/Technology intensive Consumer
Source: Czinkota and Ronkainen
Factors affecting adaptation
• Consumption patterns
• Psychosocial characteristics
• Cultural criteria
Consumption patterns
• Pattern of purchase– Is the product purchased by relatively the same consumer income
group from one country to the other?– Do the same family members motivate the purchase or dictate brand
choice in all target countries?– Do most consumers expect a product to have the same appearance?– Is the purchase rate the same regardless of the country?– Are most purchases made at the same kind of retail outlet?– Do most consumers spend the same amount of time making the
purchase?
• Pattern of usage– Do most consumers use the product for the same purpose?– Is the product used in different amounts from one area to another?– Is the method of preparation the same in all target markets?– Is the product used along with other products?
Psychosocial characteristics
• Attitudes toward the product– Are the basic psychological, social, and economic factors motivating
the purchase and use of the product the same for all target markets?– Are the advantages/disadvantages of the product in the minds of
consumers basically the same from one country to another?– Does the symbolic content of the product differ from one country to
another?– Is the psychic cost of purchasing and using the product the same?
• Attitudes toward the brand– Is the brand name equally known and accepted in all target countries?– Are customer attitudes toward the package basically the same?– Are customer attitudes toward pricing basically the same?– Is brand loyalty the same throughout target countries for the product?
Cultural criteria
• Does society restrict the purchase and/or use of the product to a particular group?
• Is there a stigma attached to a product?
• Does the usage of the product interfere with tradition in one or more of the targeted markets?
• Does the message of the product correspond to core cultural values?
• How do the different dimensions of culture influence the purchase and use of the product?
Product
• “A product is anything that can be offered to a market to satisfy a want or need” (Kotler)– Physical goods– Services– Persons– Places– Organizations– Ideas
Common product problems:• Developing new products• Managing life-cycle strategies• Managing product lines • Managing brands…
Product policy, product
mix
Product mix: product lines and brands
• Product lines– Width: how many product lines the firm carries– Length: how many items in each product line– Depth: how many variants are offered of each product in
the line– Consistency: how closely related the various product lines
are (end use, production, distribution channels, etc…)
• Branding– Identifies the company at six different levels: attributes,
benefits, values, culture, personality and user– Brand awareness, brand acceptability, brand preference,
brand loyalty– Global branding and international coherency
Degree of adaptation in FMCG
Elements of a product
Core benefit
or service
Packaging
Brand name
Quality Styling
Features
Installation
Delivery and credit
After-sale
service
Warranty
Augmented product
Tangible product
Core product
Global variations, adapt or
standardize?
Specific international product policy problems
• Country of origin, made in effect
• Preference for national brands
• Global branding (mono, line, umbrella)
• Brand equity and extension
• International standards
• Product protection
• Product adaptation
International product policy
• Existence of global product? International standard?
• Three common strategies– Straight extension
– Product invention
– Product adaptation• Technical adaptation
• Commercial adaptation
• Consumer products vs. industrial products
Pricing
Select pricing objective
Determine demand
Estimate costs
Analyze competitors’ costs, prices, and offers
Select pricing method
Select final price
Common pricing methods
• Mark-up pricing: add a standard mark-up to the product’s cost
• Target-return pricing: determine price that would yield its target rate of return (ROI)
• Perceived-value pricing: buyers’ perception of value, not the seller’s cost, is the key to pricing
• Value pricing: low price for fairly high-quality (EDLP)
• Going-rate pricing: prices are largely based on competitors’ prices, rather than on costs or demand
• Sealed-bid pricing: competitive-based pricing based on expectations of how competitors will price
• Yield pricing: discriminatory pricing depending on customer segment and inventory level
International pricing policy
• International price escalation problem
• Four types of strategies– Uniform price everywhere: different profit rates, too high in some
countries– Market-based price: ignores costs, parallel importations– Cost-based price: standard markup everywhere, too high in some
countries– Identical pricing position: compare to local competition in each
market
• Transfer prices and dumping
• Gray-market problem, copies…
Promotion
• Identify target audience: research, image analysis…
• Determine communication objectives: awareness, knowledge, liking, preference, conviction, purchase…
• Design message: content, appeals, structure, format, source…
• Select communication channels: personal, non-personal
• Promotion budget: weight of promotion in marketing mix…
• Promotion mix: allocation between advertising, sales promotion, public relations, sales force and direct marketing…
• Measure results: research…
Promotion mix – communication platforms
Advertising Sales promotion
Public Relations
Sales force Direct marketing
Print and broadcast ads
Packaging
Motion pictures
Brochures
Directories
Billboards
P-P displays
Symbols and logos
Contests
Sampling
Gifts
Fairs and trade shows
Demonstrations
Coupons
Rebates
Entertainment
Loyalty programs
Tie-ins
Press kits
Speeches
Annual reports
Sponsorships
Publications
Community relations
Lobbying
Company magazine
Special events
Sales presentations
Sales meetings
Incentive programs
Samples
Fairs and trade shows
Catalogs
Websites
Mailings
Telemarketing
On-line sales
TV shopping
International promotion policy
Three different levels of communication:
• Corporate communication: inform firm’s partners (shareholders, administrations, suppliers, press, etc…)
• Institutional communication: communicate the firm’s values to the public and inside the organization
• Brand or product communication: image, consumer’s desires, technical characteristics, performance, etc…
Corporate and institutional communication are easily standardized, but brand/product communication is harder to standardize
Communication and advertising
• Advertising is a form of communication
• A product’s position or difference is transmitted to target segment through communication
• Communication styles vary from country to country, they are culture-bound
• The role and importance of advertising/media also vary from one country to another
• Cultural factors affecting communication:– High-context vs. low-context– Explicit vs. implicit– Direct vs. indirect– Informational vs. emotional
Cultural dimensions and advertising appeals
• Power distance– High: status symbols, presence and importance of elders, master-learner relationships…– Low: independence, “empowered” consumers
• Individualism/Collectivism– IDV: low context, direct, explicit (you, we, I…), data, facts– COL: high context, indirect, symbols, entertainment, groups
• Masculinity/Femininity– MAS: winning, success, domination, persuasion, comparative advertising, reverse sexism…– FEM: less endorsement, caring, less role differentiation
• Uncertainty avoidance– High: explanations, testing, technology, design, structure, well-groomed– Low: results are important, change, subtle
• LTO/STO– STO: sense of urgency, direct style– LTO: build trust, nature, entertainment
Advertising models and culture (1/2)
• Sales-response model– Simple stimulus-response model– Very direct, “buy now” strategy, short term effect– Low PDI, IDV, MAS, Low UAI (Anglo-Saxon model)
• Persuasion model– Short term shift in attitude, buying intention, and brand preference
through providing arguments– “Lecture” form (presenters, demonstrations, testimonials), persuasive
and direct– US, UK, Germany, Switzerland, Austria…
• Involvement model– Build relationships between consumers and brands by creating
emotional closeness– Brand becomes a “personality”, indirect style– FEM, IDV (Netherlands, Scandinavia, France…)
Advertising models and culture (2/2)• Awareness model
– Create awareness to differentiate brands from similar brands– Associations, metaphors, humor, build trust, indirect– Low IDV (Spain, Asia, Latin America...)
• Emotions model– Create positive attitude and brand loyalty– Builds connections between brands and emotions, emotion often linked with
product category– Low IDV, low MAS (Spain, Latin America, Africa)
• Likability model– Liking the advertisement will lead to liking the brand– Indirect, entertaining/story, make friends to build trust and dependence– Japan, China
• Symbolism model– Turn the brand into a symbol/code, cohesion to subculture– Very culture specific (symbols of status, success, self-expression, stability…)– High PDI, High UAI, Low-Mid IDV (Asia, France, south of Europe)
Place - Marketing Channels
• What is a marketing channel (or distribution channel)?“Marketing channels are sets of interdependent organizations involved in the process of making a product or service available for use or consumption by the consumer or business user” (Kotler)
• What about international marketing channels?These interdependent organizations allow goods and services to cross national boundaries.
SCM, BtoC and BtoB, IMM
International channels
SellerChannels between countries
Channels within foreign
countries
Final buyers
1. Channels between countries: gets the products to the borders of the foreign market; decisions concerning types of intermediaries (agents, trading companies, etc…), types of transport, financing and risk management…
2. Channels within foreign countries: gets the products from entry point to final buyers and users; decisions concerning types of retailers (franchising, supermarkets, etc…), local channels
Channels of distribution vary considerably among countries. Distribution, by its nature, is a marketing activity that is performed close to the market.
Channel management
• Channel design: types of intermediaries, number of intermediaries (exclusive, selective, intensive), contractual arrangements…
• Managing retailing, wholesaling and market logistics…
• Selecting, motivating and evaluating channel members (cooperation, conflict, competition)
• Channel dynamics: traditional, VMS, HMS, multi-channel marketing systems…
• Most difficult part of the mix to standardize
Entry mode choice
• Considered by many as the most important aspect of a firm’s internationalization strategy
• Entry mode will determine long-term success or withdrawal from foreign markets
• Poor decisions can be very costly for the firm
Factors in the entry mode decision
Entry mode
decision
Target country market factors
Target country environmental
factors
Target country production
factors
Home country factors
Company product factors
Company resource and commitment
factors
External factors
Internal factors
Elements of market entry strategies
Choice of target product/market
Setting objectives and goals
Choice of entry mode
Design the marketing plan
Control systems: monitoring operations / Revising entry strategy
Target market
Entry operation
Different types of entry modes
• Exporting (commercial strategy, commercial modes)
• Foreign direct investment (industrial strategy, integrated modes)
• Associated or contractual modes (contractual strategy, competitive alliances)
Entry mode continuum
Exporting Contractual modes FDI
Commitment, risk, control, profit potential
- +
Types of exporting
• Indirect exporting– Distributor / export merchants– Export agent– EMC
• Direct exporting– Export department– Export sales representatives– E-business
• Cooperative exporting– Export groups– Piggyback exporting
Foreign direct investment (FDI)
• The ultimate form of foreign involvement
• Direct ownership of foreign-based assembly, manufacturing or sales facilities
• The company can buy part or full interest in a local company (M&A) or build its own facilities (GFI, ex nihilo)
• Considered the “preferred” mode of entry
Advantages and disadvantages of FDI
Advantages- Cost economies (labor, raw materials, incentives, freight savings, etc…)
- Better image in host country
- Deeper relationship with government, customers, local suppliers, distributors
- Better adaptation
- Full control of investments
- Long term objectives
Disadvantages- High initial and operating costs
- High level of risk
FDI options
• Make-or-buy decision– Greenfield investment / Ex nihilo– Mergers and acquisition
• Branch or subsidiary?– Structure– Legal status
• Analyzing FDI project– Assessing profitability– Discounted cash flow analysis
Associated entry modes
• Newest, most recent forms of international business
• Transfer of technology or know-how between two firms
• Shared risks
• Only option in countries where the government requires foreign firms to use local capital
• Better access to local market knowledge
Types of associated entry modes
• Joint venture: foreign and local investors share ownership and control of local operations
• Licensing: licensor licenses a foreign company to use a manufacturing process, trademark, patent, trade secret or other item of value for a fee
• Management contracts: firm exports management services instead of a product, separation between ownership and management
• International Franchising: contractual association between a franchisor (manufacturer, wholesaler or service organization) and franchisees (independent business people who buy the right to own and operate units in the franchise system). Franchising is based on some unique product, service or method of doing business.– Industrial franchising– Distribution franchising– Service franchising
B.F.F.
Example of international franchising entry modes
• Direct modes– Direct franchising (16%)– Subsidiary (19%)– Area development agreements (14%)
• Indirect modes– Joint venture (16%)– Master franchising (34%)
International franchising comparative matrix
Distance /
Adaptation
Commitment /
Control
Strong
Weak
Weak Strong
Area development agreement
Direct franchising
FDI
Master franchising
Joint venture
Direct franchising
Hierarchical model of entry mode choice
International franchising
Level of commitmentLevel of commitment
Equity Non-equity
Direct or indirect modeDirect or indirect mode
FDI Joint venture
Direct franchising or ADA
Master franchising
Environmental factors
Organizational factors
Environmental factors
Organizational factors
Determinants of entry mode choice in international franchising
Environmental factors Organizational factors
Level 1 (commitment)
Economic risk
Market size
Political risk
Competitive situation
Level of economic development
Financial and human resources
Management attitudes and orientation
Recruiting and training franchisees
Price-bonding ratio
Level 2 (direct/indirect)
Financial situation of partners
Brand protection
Local regulations
Cultural differences
Tax System
Geographic distance
Franchisor’s national culture
Brand image
Experience
Need for control
Type of product/service
Degree of standardization
Brand recognition
Dispersion of units
Entry mode choice summary
• Entry modes vary in terms of resource or equity commitment to foreign markets
• Low-commitment modes can allow firm to reduce risk in high-risk countries, culturally diverse countries or limited potential markets
• Desired degree of control over international operations influences choice of entry mode
• Loss of control yields limited returns
• No market entry strategy is appropriate in all circumstances
• Most firms will have a vast portfolio of entry modes, depending on each specific market situation
• Comparative approach to entry mode choice (commitment, control, risk, adaptation, contribution of know-how…)
Comparing different entry mode options
Foreign buying department
ITC / distributor
Piggy back
EMCAgent
Branch office
Wholly owned subsidiary (M&A)
FDIFranchising
Licensing
Management contract
AD / Concessionaire
Minority shareholding through partial acquisition
Majority JV investment (local partner know-how)
Level of ownership
Contribution of know-how
High
Low
Low High
Choosing the right entry modeAll entry modes
All feasible entry modes
Internal factors
External factors
Rejected entry modes
Comparative profit contribution analysis
Comparative risk analysis
Comparative analysis for nonprofit objectives
Ranking by overall comparative assessment
The right entry modeTarget market
Marketing channels within markets
Local marketing channels (within markets)
• What is a marketing channel or channel of distribution?– “an organized network of agencies and institutions which, in
combination, perform all the activities required to link producers with users to accomplish the marketing task” (AMA)
• They perform functions that add utility to a product or service:– Place utility: availability of a product or service in a location that
is convenient to a potential customer– Time utility: availability when desired by a customer– Form utility: availability of the product processed, prepared, in
proper condition and/or ready to use– Information utility: availability of answers to questions and
general communication about useful product features and benefits
B to C vs. B to B channels
• Business-to-consumer channels– Designed to put products in the hands of people for
their own use– Alternatives: direct marketing, franchising, sales force,
agents/brokers, internal sales force, wholesalers, retailers…
• Business-to-business channels– Deliver products to manufacturers that use them as
inputs in the production process or in day-to-day operations
– Alternatives: internal sales force, distributors, wholesalers…
Marketing channel alternatives for consumer goods
Consumers
M
Internet, mail order, door-to-
door, house party, etc…
M
Company-owned,
franchising
M
MSF
R
M
Agents, brokers
R
M
MSF
W
R
M
MSF
R
W
Problems in international marketing channels
• Global retailing– Case of hypermarkets
• Multi-channel strategies– Case of franchising-Internet
• Market-specific channels– Case of wine distribution
Global retailing
• Global retailing since 1970s, but many variations…
• Differences in the importance and types of retailing channels: shopping malls, department stores, discount stores, wholesale clubs, category killers, outlet centers, hypermarkets…
• Factors affecting the success of hypermarkets: culture, income, market fragmentation, traditional stores, locations, demography…
• Global retailing market entryWal-mart case
Global retailing market entry strategy framework
Organic growth Chain acquisition
Franchising Joint-venture
Culturally close
Culturally distant
Easy to enter
Difficult to enter
Concept of multi-channel strategies – franchising and Internet
BRICK AND MORTAR
CLICK AND MORTAR
Coexistence of traditional and virtual marketing channels
“brick and click”
Antagonostic or complementary?
Some practical advice…
• Brand structure rather than channel structure (reduce risk of network competition)
• Sell all products on-line• Ensure multi-channel coherency• Back-office motivation• Use Internet to increase visits (locations,
maps)• Limit use of e-mail…• … But does this apply to franchising?
Multi-channel strategies in franchising
• Franchising firms are « plural form networks »
• Internet is another distribution channel
• Internet seems to be a priority
• Internet is « revolutionizing » franchising
…
• But, franchisors offering on-line sales are limited– 32% in the US– 30% in the UK– Less than 20% in France
Opportunities and threats of multi-channel strategies (Franchising-Internet)
Opportunities Threats
New marketing channel
Increased sales
Network image
Positive internal effects
Cannibalism
Restriction franchisee sales
Non-conformity websites
Exclusive territories
Definition catchment area
Limits some entry modes
Coexistence of franchise system and internet
• Are « mixed networks » complementary?
• Opportunities and threats?
• Consequences?
• Internet practices?
• The future of franchising and Internet?
Some results…
Major consequences
-Better communication with franchisees-Reduces distance-Cost-effectiveness, not dissuasive-Promotional tool for services-Recruiting and training franchisees
Activities -2005: 80% website, 23% on-line sales-2010: 98% website, 54% on-line sales
Interpretations
• Optimistic, franchise-Internet are complementary• Opportunities > Risks• B to B advantages > B to C advantages• Better franchisor-franchisee relationship• Service franchising > Distribution franchising• Communication strategy > Sales strategy• « Internal sale » of website before « external sale »• Brick to click vs. Click to brick• Internet explains evolution of entry modes…
Market-specific channels – wine distribution
• Wine distribution varies enormously from one market to the next, distribution must be performed “close” to market…
• Why?...
• Tradition, Old World vs. New World
• Transportation via freight forwarder or shipping agent, physical distribution, complex regulatory requirements, complex choice of distributor/broker…
Wine distribution choices
• Four possibilities for exporting– Import distributor (négociant)– Broker (courtier, agent)– Export groups– Direct sales
• End of channel (off-premise, on-premise)– Supermarkets/Hypermarkets (FMCG)– Specialized wine shops– Duty-free– HORECA– Estate, e-commerce…
• Bottle vs. bulk– Brand image, packaging… B to C approach– Unbranded, supply chain … B to B approach
Wine distribution systems
• Regulatory framework, levels of marketing and market access
• Three types of systems around the world:– Regulated open market: normal FMCG
– Controlled markets: government intervention in nearly all aspects of wine marketing
– Mixed systems: both open and controlled
U.S. wine distribution system
• 18th Amendment (1919 – Prohibition), 21st Amendment (1933 - authority to states), FAA Act
• Aim: separate suppliers and retail outlets (tied-house relationship)
• Result: three-tier system of distribution with independent licensed wholesaler in between the retailer and the supplier/exporter
• 31 “open” states, 19 “control” or “monopoly” states
Three-tier system
Winery, Supplier
Distributor / Wholesaler
Supermarkets, wine shops, HORECA, bars,
transportation, etc…
Consumers
Winery, Supplier
Control States
State controlled
retail stores
HORECA, clubs, etc…
Consumers
Open States Control States
Tier I
Tier II
Tier III
Comparing wine retail outletsOutlet Characteristics Advantages to
producerDisadvantages to
producer
Supermarket /
Hypermarket
High volume sales, low margins and low retail
prices, usually low level of wine knowledge of staff
Quantity purchases, high brand
awareness, help with mass appeal,
convenience of location
Lack of freedom, low level of interest
in experimental styles and varieties
Independent / specialist
Tends to cater to wine consumers with higher
level of knowledge, high level of service, small
producers
“hand selling”, strong service focus and CRM, interested
in experimental styles or uncommon
varieties
Each outlet must be serviced and
supplied individually, small
volumes
State monopoly
retailer
Overall aim is to promote healthy drinking, high
level of wine knowledge, access to a wide range of
suppliers
High volume purchases can be made, national or regional access to
market
Importance of being stocked, if not, excluded from
market
Hall and Mitchell, 2007
Conclusion – 7 Rules of International Distribution
• Select distributors. Don’t let them select you.• Look for distributors capable of developing markets, rather
than those with a few good customer contacts.• Treat local distributors as long-term partners, not temporary
market-entry vehicles.• Support market entry by committing money, managers, and
proven marketing ideas.• From the start, maintain control over marketing strategy.• Make sure distributors provide you with detailed market
and financial performance data.• Build links among national distributors at the earliest
opportunity.
Source: D. Arnold, HBR, 2005
Conclusion: SRC and cultural risk
• Cultural risk is the most subjective of international business risks; it is the most difficult to assess
• SRC: the unconscious reference to one’s own cultural values
• SRC is the root of many international marketing problems
• Recognizing and admitting SRC is quite often difficult
Analytical approach to reduce the influence of one’s own cultural values (A.C. Samli)
4 step process to reducing SRC
1. Define the problem or goal in terms of domestic cultural traits, habits or norms.
2. Define the problem or goal in terms of foreign cultural traits, habits or norms. Make no value judgments.
3. Isolate de SRC influence in the problem and examine it carefully to see how it complicates the problem.
4. Redefine the problem without the SRC influence and solve for the optimal goal situation.