ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
INLET TYPE: Rect Precast with 2 Seat Grate Support at Long Ends FORM HD2L
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
INLET TYPE: Rect Precast with 2 Seat Grate Support Across Short Span FORM HD2S
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
INLET TYPE: Square/Rect Precast Opening with 4 Seat Grate Support FORM HD4
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Raised Cast Iron Frame and Round Grate FORM RD
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
IMPORTANT: Please check the image that most represents your particular inlet. REF Measured Dimensions (+/- .1")
*A
*B
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
CastingMake and Model No.:
DOT Standard Callout:
Piloted Grate Requires Special Hanger Brackets
(22” depth) (12” depth)
STD Bag P/N Short Bag P/N
FX: Standard Woven Bag FX FX-S 200 40
FX+: Woven w/ MyCelx FXP FXP-S 200 40
FXO: Woven w/ Oil Boom FXO FXO-S 200 40
PC: Post Construction Bag PC PC-S 137 140
PC+: PC Bag w/ MyCelx PCP PCP-S 137 140
LL: Litter and Leaf Bag LL LL-S High 3.5
IL: IDOT Non-Woven Bag IL IL-S 145 70
CATCH-ITs come standard with FX bags. PURE P/N = FRAME P/N & BAG P/N
1. ENTER YOUR PURE FRAME PART NUMBER FROM TABLE ABOVE
2. ENTER YOUR DESIRED BAG PART NUMBER FROM TABLE BELOW
FLEXSTORM FILTER BAGSClean Water
Flow Rate
(GPM/SqFt)
Min A.O.S. (US
Sieve)
** For STAINLESS STEEL FRAMING be sure to select the PURE Frame part number
3. PURE P/N = COMBINE FRAME P/N & BAG P/N:
Complete CATCH-IT
P/N (galvanized
frame and FX bag)
PURE
Frame P/N
(stainless) Frame Sizes
62SRDFX 62SHDR Small Round (up to 18" dia clear openings (B))
62MRDFX 62MHDR Med Round (up to 25" dia openings (B))
62LRDFX 62LHDR Large Round (up to 30" openings (B))
62XLRDFX 62XLHDR XL Round (up to 37" dia openings (B))
62XXLRDFX 62XXLHDR XXL Round (up to 48" dia openings (B))
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Round Precast or PIPE Openings with Drop- FORM RDB
Casting or Precast Make and Model No.:
DOT Standard Callout:
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Round in Concrete Precast with Slab Top FORM RDC
Casting or Precast Make and Model No.:
DOT Standard Callout:
REF Measured Dimensions (+/- .1")
*A
*B
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information Identify Your Grate Style (check one)
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
Casting or Precast Make and Model No.:
DOT Standard Callout:
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
INLET TYPE: Raised Cast Iron Frame and Flat Recatangular / Square Grate FORM SQ
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Determine Frame Size based
on Clear Opening:
Perimeter = 2 x (B + D)
Complete CATCH-IT
P/N (galvanized
frame and FX bag)
PURE
Frame P/N
(stainless)
62SSQFX 62SHD
62MSQFX 62MHD
62LSQFX 62LHD
62XLSQFX 62XLHD
Frame Sizes
Small: 64" max perimeter of clear opening
B x D dimensions 12" x 12" through 16" x 16"
Medium: 96" max perimeter of clear opening
B x D dimensions 18" x 18" through 24" x 24"
Large: 120" max perimeter of clear opening
B x D dimensions 26" x 26" through 30" x 30"
XL: 168" max perimeter of clear opening
B x D dimensions 32" x 32" through 48" x 48"
(22” depth) (12” depth)
STD Bag P/N Short Bag P/N
FX: Standard Woven Bag FX FX-S 200 40
FX+: Woven w/ MyCelx FXP FXP-S 200 40
FXO: Woven w/ Oil Boom FXO FXO-S 200 40
PC: Post Construction Bag PC PC-S 137 140
PC+: PC Bag w/ MyCelx PCP PCP-S 137 140
LL: Litter and Leaf Bag LL LL-S High 3.5
IL: IDOT Non-Woven Bag IL IL-S 145 70
CATCH-ITs come standard with FX bags. PURE P/N = FRAME P/N & BAG P/N
1. ENTER YOUR PURE FRAME PART NUMBER FROM TABLE ABOVE
2. ENTER YOUR DESIRED BAG PART NUMBER FROM TABLE BELOW
FLEXSTORM FILTER BAGSClean Water
Flow Rate
(GPM/SqFt)
Min A.O.S. (US
Sieve)
** For STAINLESS STEEL FRAMING be sure to select the PURE Frame part number
3. PURE P/N = COMBINE FRAME P/N & BAG P/N:
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
Flat Bottom:
Extended Bottom "Heavy Duty":
"E" dimension:
"P" dimension:
Grate Part Number (if known):
If "E" dimension extends by more than 2" please
provide the "E' and "P" dimensions below.
Grate Information
Identify Your Grate Style (check one)
INLET TYPE: Raised Cast Iron Frame and Grate with Curb Hood FORM SQCB
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
*E
F
G
H
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Casting Interference Prevents Extension
Open Entry Beneath Hood Allows Extension
Please indicate whether or not your casting allows for
the Flexstorm frame to extend beneath the curb hood
freely or if it there is a back grate support ledge that
prevents clear entry/extension under the hood.
Complete CATCH-IT
P/N (galvanized
frame and FX bag
with rear curb flap)
PURE Frame P/N
(stainless) without
extended framing
or rear deflector
PURE Frame P/N
(stainless) with
extended framing or
rear deflector Frame Sizes
62SCBFX 62SHD 62SHDCBSmall: 64" max perimeter of clear opening
B x D dimensions 12" x 12" through 16" x 16"
62MCBFX 62MHD 62MHDCBMedium: 96" max perimeter of clear opening
B x D dimensions 18" x 18" through 24" x 24"
62LCBFX 62LHD 62LHDCBLarge: 120" max perimeter of clear opening
B x D dimensions 26" x 26" through 30" x 30"
62XLCBFX 62XLHD 62XLHDCBXL: 168" max perimeter of clear opening
B x D dimensions 32" x 32" through 48" x 48"
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Raised Cast Iron Frame with Rolled Curb Grate FORM SQRC
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
*E
*F
*G
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Casting or Precast Make and Model No.:
DOT Standard Callout:
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
Casting or Precast Make and Model No.:
DOT Standard Callout:
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Raised Cast Iron Frame with V-Grate FORM SQVG
REF Measured Dimensions (+/- .1")
*A
*B
*C
*D
*E
*F
*G
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
** Note: when using FLEXSTORM Inlet Filters for Post Construction requirements, ADS strongly recommends Stainless Steel Framing for 25 year life rating.
Filter Application (check one or both):
During Construction:
Post Construction:
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com
ADS FLEXSTORM DIMENSIONAL / ORDER FORM
ADS FLEXSTORM P/N:
Qty Required:
Ref Casting make/model or
Precast make/model (if known):Ref DOT Standard Type / Callout
(if known):
Customer Name:
Contact Name:
Contact Number:
Ref PO#:
Ref Job Name and/or Inlet
Location:
REQUIRED ORDER INFORMATION
Important: If casting or precast make and model numbers are unknown then
all physical dimensions are required. For help on how to measure your inlet
please visit www.inletfilters.com.
INLET TYPE: Open Throat Curb Inlet (Wall Mount Filters) FORM WM
REF Measured Dimensions (+/- .1")
*A
*B
* Required Dimensions. If casting or precast make and
model numbers are unknown then all required
dimensions must be provided and accurate to +/- .1"
Casting or Precast Make and Model No.:
DOT Standard Callout:
CATCH-IT COMPLETE P/N (galvanized with
FX bag)
PURE Frame P/N
(STAINLESS STEEL) Sizes
62WM1FX 62HDWM1 Up to 4' curb openings (A) (1 Filter and Mounting Hardware)
62WM2FX 62HDWM2 Between 4' and 8' curb openings (A) (2 Filters and Mounting Hardware)
62WM3FX 62HDWM3 Between 8' and 12' curb openings (A) (3 Filters and Mounting Hardware)
62WM4FX 62HDWM4 Between 12' and 16' curb openings (A) (4 Filters and Mounting Hardware)
Please email or fax completed dimensional forms to your local ADS Rep or Customer Service Center www.ads-pipe.com, 800 821-6710 ph.
If unknown, please send directly to FLEXSTORM at 630 355-3477 fax, [email protected], www.inletfilters.com