Impact Crushers
= High Crushing ratio upto 80
= Reversible rotation which maximises use/life of hammers and grinding blocks
= Easy maintenance
= Suitable for fine crushing
= High crushing efficiency
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
Impact Crushers TRF LIMITEDA Enterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
Approximate Capacity & Dimensions
Model
&
Size
Rotor
size
Dia x Width
(mm)
Max.
Feed
size
(mm)
Capacity
(TPH)
Approx.
Weight
(Kg)
Rotor
Speed
(M./Sec)
Drive
(KW)
Length
(mm)
Width
(mm)
Height
(mm)
KC 14/2100
KS 12/2100
KR 9/1400
2100X2100
1800X2100
1400X1400
1000X1500
300 X 450
100 X 100
350-900
200-400
150-200
15-35
20-40
21-30
300-750
150-360
110-130
5300
4700
3560
3400
3200
2830
4100
3140
3080
82000
38000
13500
MODEL KR
1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
TRF LIMITEDA Enterprise
Impact Crusher [ type HB With Hammer
Bar Arrangement
Rotor
Hammer Bars
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
other similar materials under toughest operating conditions.
The rotor is made of high-carbon steel casting, and has
wedge-shape hammer holding grooves extending parallel to
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation.
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by
repositioning after one face wears out. The hammer bars are
of Mn steel castings.
Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
zone. The second and the last plates are suspended from
the frame through hinged connections. These are adjustable
by heavy duty coil spring.
The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Breaker Plates
Frame
MODEL KC MODEL KS
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.
Impact Crushers
= High Crushing ratio upto 80
= Reversible rotation which maximises use/life of hammers and grinding blocks
= Easy maintenance
= Suitable for fine crushing
= High crushing efficiency
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
Impact Crushers TRF LIMITEDA Enterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
Approximate Capacity & Dimensions
Model
&
Size
Rotor
size
Dia x Width
(mm)
Max.
Feed
size
(mm)
Capacity
(TPH)
Approx.
Weight
(Kg)
Rotor
Speed
(M./Sec)
Drive
(KW)
Length
(mm)
Width
(mm)
Height
(mm)
KC 14/2100
KS 12/2100
KR 9/1400
2100X2100
1800X2100
1400X1400
1000X1500
300 X 450
100 X 100
350-900
200-400
150-200
15-35
20-40
21-30
300-750
150-360
110-130
5300
4700
3560
3400
3200
2830
4100
3140
3080
82000
38000
13500
MODEL KR
1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
TRF LIMITEDA Enterprise
Impact Crusher [ type HB With Hammer
Bar Arrangement
Rotor
Hammer Bars
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
other similar materials under toughest operating conditions.
The rotor is made of high-carbon steel casting, and has
wedge-shape hammer holding grooves extending parallel to
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation.
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by
repositioning after one face wears out. The hammer bars are
of Mn steel castings.
Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
zone. The second and the last plates are suspended from
the frame through hinged connections. These are adjustable
by heavy duty coil spring.
The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Breaker Plates
Frame
MODEL KC MODEL KS
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.
Impact Crushers
General
Features
Mode of Operation
Hammers & Crushing Ledges
TRF Impact Crushers are ideal processing machines for
primary and secondary crushing of raw materials for the steel
and iron industry, hard coal and lignite, limestone, gypsum or
minerals. These are also extensively used for the tertiary
crus hing of limestone, dolomite, dunite for the Bedding and
Blending Plant for sinter preparation and coal for Coking
Plant. Its sturdy and proven design offers the following
advantages :
= increased throughout capacity
= maximum possible operating reliability
= mainly unaffected by foreign bodies
= low maintenance cost
1. Crushing ratio can be set at an extremely large value :
normally at 20 and maximum up to 80.
2. A high crushing efficiency reduces the power
consumption.
3. Selective crushing can be made with ease.
4. The shape of crushed material will increasingly
become cubic.
5. Mechanism and operation are simple.
6. Safety running is assured.
7. Lighter in machine weight as against capacity,
saving installation cost.
TRF manufactures various types of Impact Crushers and
hence is in a position to offer the most suitable Crusher
required for the specific duty condition.
Impact Crusher (Type TA with two Part
Hammer Arrangement)
The feed material is crushed by means of rotating beaters with
renewable heads by impact against the grinding ledges. Due
to the reversible rotor with crushing ledges arranged on both
sides the wearing face of the hammer heads can be used to
the maximum possible extent without reversing the hammers.
The machine is provided with central inlet and open discharge
which eliminates the chances of clogging of grate opening.
The rotor of the crusher consists of a forged heavy duty rotor
shaft and machined rotor discs keyed to the shaft. The rotor
is provided with two part hammer arrangement consisting
of Hammer arms and hammer heads which are arranged
around the circumference of the rotor in a staggered
manner. The quantity of hammers per row is decided
depending on the duty requirement. The locating holes for
the hammer arms are drilled on special device with high
precision pitch thus eliminating the vibration when the
machine is running.
The hammer heads on the hammer arms are reversible
and can be worn down to 70% of their original size.
The impact walls are arranged around the rotor and are
equipped with renewable grinding ledges of wear resistant
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating
hammer heads and the impact walls. At the same time the
adjustment serves for the compensation of wear.
In the standard design, the adjustment of the impact walls
can be earned out while the machine is running by
regulating the screws on the upper part of the housing
while the lower adjustment is effected by means of a
ratchet and worm gear.
The housing of the Impact Crusher is divided into parts and
can be opened hydraulically (or mechanically) on the left
and right side of the rotor. Thus, all wearing parts become
accessible and can be easily replaced. The housing is also
provided with large inspection doors allowing quick
inspection of the inside condition of the machine.
Impact Crushers (type TE With Single
Piece Hammer Arrangement)
Material driven against breaker blocks rebounds and is
again struck by the hammers, shattering under this high
velocity impact. Small, finished particles cease to react
freely to additional hammer blows and are swept from the
active reduction zone.
By this maximum crushing power is applied to large
fragments while little energy is expended on finished
particles. The impactor is ideally suited to the closed circuit
crushing system to obtain maximum crushing efficiency.
Hydraulically Hinged Housing
Mode of Operation
TRF LIMITEDA Enterprise
TYPE TA
Overall Dimension in mm
Size ARotordia
BRotorwidth
C D E F G H I K L M N P* WeightKg
TA-1210/10
TA-1212/10
TA-1212/12
TA-1212/14
TA-1218/18
TA-1218/20
TA-1218/22
TA-1220/22
TA-1220/28
TA-1220/30
TA-4014/12
TA-4014/14
TA-4014/16
TA-4016/14
TA-4016/16
TA-4016/18
TA-4018/20
1000
1200
1200
1200
1800
1800
1800
2000
2000
2000
1400
1400
1400
1600
1600
1600
1800
1000
1000
1200
1400
1800
2000
2200
2200
2800
3000
1200
1400
1600
1400
1600
1800
2000
1450
1800
1800
1800
2800
2800
2800
3000
2500
2500
1700
1700
1700
1900
1900
1900
2100
1900
2100
2100
2100
3000
3000
3000
3300
3300
3300
2300
2300
2300
2600
2600
2600
2800
1650
1750
1950
2150
2950
3150
3350
3550
4150
4350
1950
2150
2350
2300
2500
2700
3000
1900
1980
2200
2420
3400
3630
3880
4200
4500
4850
2300
2500
2700
2700
2900
3100
3500
1450
1700
1700
1700
2500
2500
2500
2800
2800
2800
1900
1900
1900
2150
2150
2150
2400
650
750
750
750
1185
1185
1185
1300
1300
1300
850
850
850
1000
1000
1000
1100
800
950
950
950
1315
1315
1315
1500
1500
1500
1050
1050
1050
1150
1150
1150
1300
3900
4100
4300
4300
5800
5800
5800
6500
7800
7800
5000
5000
5000
5500
5500
5500
6000
190
200
220
240
420
450
500
620
400
550
350
350
350
400
400
400
400
850
1000
1000
1000
1600
1600
1600
1800
1900
2200
1250
1250
1250
1500
1500
1500
1500
1700
2000
2000
2000
3100
3100
3100
3500
3300
3220
2300
2300
2300
2600
2600
2600
3000
6000
7500
8000
8500
24000
27000
31000
44500
49000
30000
11900
13400
14800
18500
22000
25500
38000
350
400
400
400
650
650
650
750
700
700
450
450
450
550
550
550
600
* For hydraulic design only.Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
Construction Feature
Frame
Rotor Assembly
The frame is of heavy fabricated design and is provided with
wear-resistant renewable liners. Large access door is
provided for the inspection of hammers and breaker blocks.
The rotor assembly runs in self-aligning spherical roller
bearings. The bearings are fitted in dust proof cast steel
housing with labyrinth seals. Hammers are of cast Mn steel
and free swinging to absorb the crushing shock.
Breaker Blocks
Drive System
Breaker blocks are of cast Mn steel and arranged
symmetrically around the rotor assembly. Breaker blocks
are easily replaceable. The complete grinding wall
assembly can be adjusted.
Impactor are generally driven by electric motors and V-belts
and sheaves. V-belt drive ensures the future adjustment and
fine tuning after commissioning for the desired product
gradation. Crushers can also be directly driven by electric
motor coupled with the gear box.
TYPE TE
OVERALL DIMENSION AND CAPACITY (TPH)
Machine
Size
Capacity
TPH Length
mm
C
Height
mm
E
Overall
width
mm
D
Width
mm
A
Length
mm
B
Feed
Size
mm
Motor
hp
Approx.
weight
tonnes
Hopper
TE-263
TE-305
TE-309
TE-385
TE-387
TE-389
TE-409
TE-411
TE-413
TE-415
TE-509
TE-511
TE-513
TE-515
TE-517
TE-519
TE-621
TE-623
TE-625
115
125
125
200
200
200
250
250
250
250
380
380
380
380
380
380
380
380
380
15
20-30
40-60
70
110
140
200
250
300
360
220
290
360
430
500
570
680
790
890
1.65
3.33
5.50
7.15
8.47
9.79
14.85
15.95
17.16
18.26
17.60
18.92
20.35
29.70
31.90
34.10
60.50
66.00
73.70
150
250
250
355
355
355
380
380
380
380
915
915
915
915
915
915
915
915
915
280
330
990
510
760
990
990
1245
1500
1730
965
1220
1475
1730
1985
2235
2440
2925
3405
660
1220
1375
2010
2010
2010
2235
2235
2235
2235
2695
2695
2695
2695
2695
2695
3735
3735
3735
915
1040
1800
1345
1600
1855
2540
2795
3050
3280
2540
2770
3025
3250
3660
3910
4675
5160
5645
660
1375
1525
2085
2085
2085
2440
2440
2440
2440
2695
2695
2695
2695
2695
2695
3355
3355
3355
15-20
40-60
80-120
60-100
70-150
125-200
125-200
150-350
250-400
300-450
200-400
300-500
400-600
500-700
600-800
700-850
800-1000
950-1150
1150-1350
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.
Impact Crushers
Impact Crushers
General
Features
Mode of Operation
Hammers & Crushing Ledges
TRF Impact Crushers are ideal processing machines for
primary and secondary crushing of raw materials for the steel
and iron industry, hard coal and lignite, limestone, gypsum or
minerals. These are also extensively used for the tertiary
crus hing of limestone, dolomite, dunite for the Bedding and
Blending Plant for sinter preparation and coal for Coking
Plant. Its sturdy and proven design offers the following
advantages :
= increased throughout capacity
= maximum possible operating reliability
= mainly unaffected by foreign bodies
= low maintenance cost
1. Crushing ratio can be set at an extremely large value :
normally at 20 and maximum up to 80.
2. A high crushing efficiency reduces the power
consumption.
3. Selective crushing can be made with ease.
4. The shape of crushed material will increasingly
become cubic.
5. Mechanism and operation are simple.
6. Safety running is assured.
7. Lighter in machine weight as against capacity,
saving installation cost.
TRF manufactures various types of Impact Crushers and
hence is in a position to offer the most suitable Crusher
required for the specific duty condition.
Impact Crusher (Type TA with two Part
Hammer Arrangement)
The feed material is crushed by means of rotating beaters with
renewable heads by impact against the grinding ledges. Due
to the reversible rotor with crushing ledges arranged on both
sides the wearing face of the hammer heads can be used to
the maximum possible extent without reversing the hammers.
The machine is provided with central inlet and open discharge
which eliminates the chances of clogging of grate opening.
The rotor of the crusher consists of a forged heavy duty rotor
shaft and machined rotor discs keyed to the shaft. The rotor
is provided with two part hammer arrangement consisting
of Hammer arms and hammer heads which are arranged
around the circumference of the rotor in a staggered
manner. The quantity of hammers per row is decided
depending on the duty requirement. The locating holes for
the hammer arms are drilled on special device with high
precision pitch thus eliminating the vibration when the
machine is running.
The hammer heads on the hammer arms are reversible
and can be worn down to 70% of their original size.
The impact walls are arranged around the rotor and are
equipped with renewable grinding ledges of wear resistant
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating
hammer heads and the impact walls. At the same time the
adjustment serves for the compensation of wear.
In the standard design, the adjustment of the impact walls
can be earned out while the machine is running by
regulating the screws on the upper part of the housing
while the lower adjustment is effected by means of a
ratchet and worm gear.
The housing of the Impact Crusher is divided into parts and
can be opened hydraulically (or mechanically) on the left
and right side of the rotor. Thus, all wearing parts become
accessible and can be easily replaced. The housing is also
provided with large inspection doors allowing quick
inspection of the inside condition of the machine.
Impact Crushers (type TE With Single
Piece Hammer Arrangement)
Material driven against breaker blocks rebounds and is
again struck by the hammers, shattering under this high
velocity impact. Small, finished particles cease to react
freely to additional hammer blows and are swept from the
active reduction zone.
By this maximum crushing power is applied to large
fragments while little energy is expended on finished
particles. The impactor is ideally suited to the closed circuit
crushing system to obtain maximum crushing efficiency.
Hydraulically Hinged Housing
Mode of Operation
TRF LIMITEDA Enterprise
TYPE TA
Overall Dimension in mm
Size ARotordia
BRotorwidth
C D E F G H I K L M N P* WeightKg
TA-1210/10
TA-1212/10
TA-1212/12
TA-1212/14
TA-1218/18
TA-1218/20
TA-1218/22
TA-1220/22
TA-1220/28
TA-1220/30
TA-4014/12
TA-4014/14
TA-4014/16
TA-4016/14
TA-4016/16
TA-4016/18
TA-4018/20
1000
1200
1200
1200
1800
1800
1800
2000
2000
2000
1400
1400
1400
1600
1600
1600
1800
1000
1000
1200
1400
1800
2000
2200
2200
2800
3000
1200
1400
1600
1400
1600
1800
2000
1450
1800
1800
1800
2800
2800
2800
3000
2500
2500
1700
1700
1700
1900
1900
1900
2100
1900
2100
2100
2100
3000
3000
3000
3300
3300
3300
2300
2300
2300
2600
2600
2600
2800
1650
1750
1950
2150
2950
3150
3350
3550
4150
4350
1950
2150
2350
2300
2500
2700
3000
1900
1980
2200
2420
3400
3630
3880
4200
4500
4850
2300
2500
2700
2700
2900
3100
3500
1450
1700
1700
1700
2500
2500
2500
2800
2800
2800
1900
1900
1900
2150
2150
2150
2400
650
750
750
750
1185
1185
1185
1300
1300
1300
850
850
850
1000
1000
1000
1100
800
950
950
950
1315
1315
1315
1500
1500
1500
1050
1050
1050
1150
1150
1150
1300
3900
4100
4300
4300
5800
5800
5800
6500
7800
7800
5000
5000
5000
5500
5500
5500
6000
190
200
220
240
420
450
500
620
400
550
350
350
350
400
400
400
400
850
1000
1000
1000
1600
1600
1600
1800
1900
2200
1250
1250
1250
1500
1500
1500
1500
1700
2000
2000
2000
3100
3100
3100
3500
3300
3220
2300
2300
2300
2600
2600
2600
3000
6000
7500
8000
8500
24000
27000
31000
44500
49000
30000
11900
13400
14800
18500
22000
25500
38000
350
400
400
400
650
650
650
750
700
700
450
450
450
550
550
550
600
* For hydraulic design only.Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
Construction Feature
Frame
Rotor Assembly
The frame is of heavy fabricated design and is provided with
wear-resistant renewable liners. Large access door is
provided for the inspection of hammers and breaker blocks.
The rotor assembly runs in self-aligning spherical roller
bearings. The bearings are fitted in dust proof cast steel
housing with labyrinth seals. Hammers are of cast Mn steel
and free swinging to absorb the crushing shock.
Breaker Blocks
Drive System
Breaker blocks are of cast Mn steel and arranged
symmetrically around the rotor assembly. Breaker blocks
are easily replaceable. The complete grinding wall
assembly can be adjusted.
Impactor are generally driven by electric motors and V-belts
and sheaves. V-belt drive ensures the future adjustment and
fine tuning after commissioning for the desired product
gradation. Crushers can also be directly driven by electric
motor coupled with the gear box.
TYPE TE
OVERALL DIMENSION AND CAPACITY (TPH)
Machine
Size
Capacity
TPH Length
mm
C
Height
mm
E
Overall
width
mm
D
Width
mm
A
Length
mm
B
Feed
Size
mm
Motor
hp
Approx.
weight
tonnes
Hopper
TE-263
TE-305
TE-309
TE-385
TE-387
TE-389
TE-409
TE-411
TE-413
TE-415
TE-509
TE-511
TE-513
TE-515
TE-517
TE-519
TE-621
TE-623
TE-625
115
125
125
200
200
200
250
250
250
250
380
380
380
380
380
380
380
380
380
15
20-30
40-60
70
110
140
200
250
300
360
220
290
360
430
500
570
680
790
890
1.65
3.33
5.50
7.15
8.47
9.79
14.85
15.95
17.16
18.26
17.60
18.92
20.35
29.70
31.90
34.10
60.50
66.00
73.70
150
250
250
355
355
355
380
380
380
380
915
915
915
915
915
915
915
915
915
280
330
990
510
760
990
990
1245
1500
1730
965
1220
1475
1730
1985
2235
2440
2925
3405
660
1220
1375
2010
2010
2010
2235
2235
2235
2235
2695
2695
2695
2695
2695
2695
3735
3735
3735
915
1040
1800
1345
1600
1855
2540
2795
3050
3280
2540
2770
3025
3250
3660
3910
4675
5160
5645
660
1375
1525
2085
2085
2085
2440
2440
2440
2440
2695
2695
2695
2695
2695
2695
3355
3355
3355
15-20
40-60
80-120
60-100
70-150
125-200
125-200
150-350
250-400
300-450
200-400
300-500
400-600
500-700
600-800
700-850
800-1000
950-1150
1150-1350
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.
Impact Crushers
Impact Crushers
General
Features
Mode of Operation
Hammers & Crushing Ledges
TRF Impact Crushers are ideal processing machines for
primary and secondary crushing of raw materials for the steel
and iron industry, hard coal and lignite, limestone, gypsum or
minerals. These are also extensively used for the tertiary
crus hing of limestone, dolomite, dunite for the Bedding and
Blending Plant for sinter preparation and coal for Coking
Plant. Its sturdy and proven design offers the following
advantages :
= increased throughout capacity
= maximum possible operating reliability
= mainly unaffected by foreign bodies
= low maintenance cost
1. Crushing ratio can be set at an extremely large value :
normally at 20 and maximum up to 80.
2. A high crushing efficiency reduces the power
consumption.
3. Selective crushing can be made with ease.
4. The shape of crushed material will increasingly
become cubic.
5. Mechanism and operation are simple.
6. Safety running is assured.
7. Lighter in machine weight as against capacity,
saving installation cost.
TRF manufactures various types of Impact Crushers and
hence is in a position to offer the most suitable Crusher
required for the specific duty condition.
Impact Crusher (Type TA with two Part
Hammer Arrangement)
The feed material is crushed by means of rotating beaters with
renewable heads by impact against the grinding ledges. Due
to the reversible rotor with crushing ledges arranged on both
sides the wearing face of the hammer heads can be used to
the maximum possible extent without reversing the hammers.
The machine is provided with central inlet and open discharge
which eliminates the chances of clogging of grate opening.
The rotor of the crusher consists of a forged heavy duty rotor
shaft and machined rotor discs keyed to the shaft. The rotor
is provided with two part hammer arrangement consisting
of Hammer arms and hammer heads which are arranged
around the circumference of the rotor in a staggered
manner. The quantity of hammers per row is decided
depending on the duty requirement. The locating holes for
the hammer arms are drilled on special device with high
precision pitch thus eliminating the vibration when the
machine is running.
The hammer heads on the hammer arms are reversible
and can be worn down to 70% of their original size.
The impact walls are arranged around the rotor and are
equipped with renewable grinding ledges of wear resistant
cast material. The final product of the crusher can be
altered by adjusting the distance between the rotating
hammer heads and the impact walls. At the same time the
adjustment serves for the compensation of wear.
In the standard design, the adjustment of the impact walls
can be earned out while the machine is running by
regulating the screws on the upper part of the housing
while the lower adjustment is effected by means of a
ratchet and worm gear.
The housing of the Impact Crusher is divided into parts and
can be opened hydraulically (or mechanically) on the left
and right side of the rotor. Thus, all wearing parts become
accessible and can be easily replaced. The housing is also
provided with large inspection doors allowing quick
inspection of the inside condition of the machine.
Impact Crushers (type TE With Single
Piece Hammer Arrangement)
Material driven against breaker blocks rebounds and is
again struck by the hammers, shattering under this high
velocity impact. Small, finished particles cease to react
freely to additional hammer blows and are swept from the
active reduction zone.
By this maximum crushing power is applied to large
fragments while little energy is expended on finished
particles. The impactor is ideally suited to the closed circuit
crushing system to obtain maximum crushing efficiency.
Hydraulically Hinged Housing
Mode of Operation
TRF LIMITEDA Enterprise
TYPE TA
Overall Dimension in mm
Size ARotordia
BRotorwidth
C D E F G H I K L M N P* WeightKg
TA-1210/10
TA-1212/10
TA-1212/12
TA-1212/14
TA-1218/18
TA-1218/20
TA-1218/22
TA-1220/22
TA-1220/28
TA-1220/30
TA-4014/12
TA-4014/14
TA-4014/16
TA-4016/14
TA-4016/16
TA-4016/18
TA-4018/20
1000
1200
1200
1200
1800
1800
1800
2000
2000
2000
1400
1400
1400
1600
1600
1600
1800
1000
1000
1200
1400
1800
2000
2200
2200
2800
3000
1200
1400
1600
1400
1600
1800
2000
1450
1800
1800
1800
2800
2800
2800
3000
2500
2500
1700
1700
1700
1900
1900
1900
2100
1900
2100
2100
2100
3000
3000
3000
3300
3300
3300
2300
2300
2300
2600
2600
2600
2800
1650
1750
1950
2150
2950
3150
3350
3550
4150
4350
1950
2150
2350
2300
2500
2700
3000
1900
1980
2200
2420
3400
3630
3880
4200
4500
4850
2300
2500
2700
2700
2900
3100
3500
1450
1700
1700
1700
2500
2500
2500
2800
2800
2800
1900
1900
1900
2150
2150
2150
2400
650
750
750
750
1185
1185
1185
1300
1300
1300
850
850
850
1000
1000
1000
1100
800
950
950
950
1315
1315
1315
1500
1500
1500
1050
1050
1050
1150
1150
1150
1300
3900
4100
4300
4300
5800
5800
5800
6500
7800
7800
5000
5000
5000
5500
5500
5500
6000
190
200
220
240
420
450
500
620
400
550
350
350
350
400
400
400
400
850
1000
1000
1000
1600
1600
1600
1800
1900
2200
1250
1250
1250
1500
1500
1500
1500
1700
2000
2000
2000
3100
3100
3100
3500
3300
3220
2300
2300
2300
2600
2600
2600
3000
6000
7500
8000
8500
24000
27000
31000
44500
49000
30000
11900
13400
14800
18500
22000
25500
38000
350
400
400
400
650
650
650
750
700
700
450
450
450
550
550
550
600
* For hydraulic design only.Note 1. The dimensions are approximate and should not be used for construction purposes. Certified drawings will be furnished on receipt of order.
Construction Feature
Frame
Rotor Assembly
The frame is of heavy fabricated design and is provided with
wear-resistant renewable liners. Large access door is
provided for the inspection of hammers and breaker blocks.
The rotor assembly runs in self-aligning spherical roller
bearings. The bearings are fitted in dust proof cast steel
housing with labyrinth seals. Hammers are of cast Mn steel
and free swinging to absorb the crushing shock.
Breaker Blocks
Drive System
Breaker blocks are of cast Mn steel and arranged
symmetrically around the rotor assembly. Breaker blocks
are easily replaceable. The complete grinding wall
assembly can be adjusted.
Impactor are generally driven by electric motors and V-belts
and sheaves. V-belt drive ensures the future adjustment and
fine tuning after commissioning for the desired product
gradation. Crushers can also be directly driven by electric
motor coupled with the gear box.
TYPE TE
OVERALL DIMENSION AND CAPACITY (TPH)
Machine
Size
Capacity
TPH Length
mm
C
Height
mm
E
Overall
width
mm
D
Width
mm
A
Length
mm
B
Feed
Size
mm
Motor
hp
Approx.
weight
tonnes
Hopper
TE-263
TE-305
TE-309
TE-385
TE-387
TE-389
TE-409
TE-411
TE-413
TE-415
TE-509
TE-511
TE-513
TE-515
TE-517
TE-519
TE-621
TE-623
TE-625
115
125
125
200
200
200
250
250
250
250
380
380
380
380
380
380
380
380
380
15
20-30
40-60
70
110
140
200
250
300
360
220
290
360
430
500
570
680
790
890
1.65
3.33
5.50
7.15
8.47
9.79
14.85
15.95
17.16
18.26
17.60
18.92
20.35
29.70
31.90
34.10
60.50
66.00
73.70
150
250
250
355
355
355
380
380
380
380
915
915
915
915
915
915
915
915
915
280
330
990
510
760
990
990
1245
1500
1730
965
1220
1475
1730
1985
2235
2440
2925
3405
660
1220
1375
2010
2010
2010
2235
2235
2235
2235
2695
2695
2695
2695
2695
2695
3735
3735
3735
915
1040
1800
1345
1600
1855
2540
2795
3050
3280
2540
2770
3025
3250
3660
3910
4675
5160
5645
660
1375
1525
2085
2085
2085
2440
2440
2440
2440
2695
2695
2695
2695
2695
2695
3355
3355
3355
15-20
40-60
80-120
60-100
70-150
125-200
125-200
150-350
250-400
300-450
200-400
300-500
400-600
500-700
600-800
700-850
800-1000
950-1150
1150-1350
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.
Impact Crushers
Impact Crushers
= High Crushing ratio upto 80
= Reversible rotation which maximises use/life of hammers and grinding blocks
= Easy maintenance
= Suitable for fine crushing
= High crushing efficiency
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
Impact Crushers TRF LIMITEDA Enterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
Approximate Capacity & Dimensions
Model
&
Size
Rotor
size
Dia x Width
(mm)
Max.
Feed
size
(mm)
Capacity
(TPH)
Approx.
Weight
(Kg)
Rotor
Speed
(M./Sec)
Drive
(KW)
Length
(mm)
Width
(mm)
Height
(mm)
KC 14/2100
KS 12/2100
KR 9/1400
2100X2100
1800X2100
1400X1400
1000X1500
300 X 450
100 X 100
350-900
200-400
150-200
15-35
20-40
21-30
300-750
150-360
110-130
5300
4700
3560
3400
3200
2830
4100
3140
3080
82000
38000
13500
MODEL KR
1. KC type is designed as primary crusher for crushing limestone and dolomite.
2. KS type is extensively used as a secondary crusher for crushing limestone, dolomite and other friable materials.
2A. Both KC and KS types are one way machines capable of accepting large lump sizes comparative to reversible design
Impactors.
3. KR type is reversible machine and used extensively for fine crushing of gravels, coke, etc..
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
TRF LIMITEDA Enterprise
Impact Crusher [ type HB With Hammer
Bar Arrangement
Rotor
Hammer Bars
TRF Hammer Bar type Impact Crushers are suitable for
crushing hard rocks such as limestone, dolomite, granite and
other similar materials under toughest operating conditions.
The rotor is made of high-carbon steel casting, and has
wedge-shape hammer holding grooves extending parallel to
the shaft. Its peripheral part is hardened by high frequency
induction heating for greater wear resistance. The shaft is
press fitted and the rotor shaft assembly is dynamically
balanced to assure vibration free operation.
The hammer bars extend over the full width of the rotor. The
bars are so designed that these can be reused by
repositioning after one face wears out. The hammer bars are
of Mn steel castings.
Two or three Breaker plates of Mn Steel casting are
positioned to form an arc of the circle centered to the point of
impact. The first plate is normally fixed in initial crushing
zone. The second and the last plates are suspended from
the frame through hinged connections. These are adjustable
by heavy duty coil spring.
The frame is fabricated with heavy steel plates and is stress
relieved. Inside surface of the frame is provided with cast Mn
steel liners.
Breaker Plates
Frame
MODEL KC MODEL KS
Capacities are based on reducing an average limestone to a product of 20 mm and under, when operating in closed circuit with a screen.
Ratings & dimensions are approximate.