IEC SYSTEM FOR CONFIRMITY TESTING ANDCERTIFICATION OF ELECTRICAL EQUIPMENT

COMMITTEE OF TESTING LABORATORIES

July 2006 1/3 IEC 61095, ed 1.1

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING

IEC 61095:2000-10, Edition 1.1

Electromechanical contactors for household and similar purposes

R=Required by LabS=May be subcontracted3PPS=Three Phase Power Supply required

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting9.2.1.1 Test of resistance to ageing Climatic chamber,

Forcemeter 5NR

9.2.1.2 Test of resistance to humidity Climatic chamber (IEC 68-2-3)Dielectric strength test equipment: 2500 V∼ (45 Hz ÷ 65 Hz)Minimum short circuit current: 0,2 ANo over current tripping: < 0,1 A

R

9.2.1.3 Test of resistance to heat Ball-pressure apparatusHeating cabinetStandard test fingerForcemeter 5 N

R

9.2.1.4 Test of resistance to abnormal heat and fire Glow-wire test apparatus (IEC 695-2-1)Flammability classification test (IEC 707)Hot wire ignition test

R

IEC SYSTEM FOR CONFIRMITY TESTING ANDCERTIFICATION OF ELECTRICAL EQUIPMENT

COMMITTEE OF TESTING LABORATORIES

July 2006 2/3 IEC 61095, ed 1.1

Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting9.2.1.5 Test of resistance to rusting Refined petrol

10 % Solution of ammoniumchlorideHeating cabinet

R

9.2.1.6 Test of resistance to tracking Apparatus (IEC 112),Solution A R9.2.2 Test on screws or nuts other than those on

terminalsTorque-screwdriver: 0,2 Nm to 10 NmTorque-spanner: 0,2 Nm to 10 Nm

R

9.2.4 Mechanical properties of terminals Torque-screwdriver: 10 NmTorque-spanner: 10 NmForcemeter: 10 N to 190 NWeight 0,3 kg to 6,8 kgGauges A und BTest equipment for flexion test

R

9.2.5 Test of resistance to impact PendulumhammerSphere test apparatus

R

9.2.6 Test of durability of marking Water petrol R9.3.3.1 Operation Recorder R9.3.3.2 Operation limits Oscilloscope R9.3.3.3 Temperature-rise Fine Thermocouples (0,2 mm) R9.3.3.4 Dielectric properties Impulse voltage generator up to 12 kV (1,2 µs /50 µs)

Voltage up to 4 kV∼ (45 Hz – 65 Hz)R

9.3.3.5 Making and breaking capacities OscilloscopeAuxiliary switchLoad equipmentPower supply 1500 A∼, UeTimer

R3PPS

9.3.4 Performance under short-circuit conditions Power supply and load equipment 6000 A∼I2t - values

R3PPS

IEC SYSTEM FOR CONFIRMITY TESTING ANDCERTIFICATION OF ELECTRICAL EQUIPMENT

COMMITTEE OF TESTING LABORATORIES

July 2006 3/3 IEC 61095, ed 1.1

Note: The presence of equipment alone does not indicate a satisfactory situation. Assessors must evaluate the equipment design, calibration, uncertainty anddocumentation to ensure compliance with the directions of the standard. The requirements of ISO Guide 25 regarding validation are applicable, as the tests of thisstandard are not standardized tests.