How to using an IAT mini Encoder Device
live streaming to Social Media Services(version 9)
04/12/2018
Copyright @ iat101
• All live streaming to Facebook, YouTube, or Twitter…requiring your own password for live streaming, it is called streaming key. (The streaming key is not your Facebook or YouTube account password. It is a 16-digit password for live streaming,
please check page 22 for YouTube, Page 24 for Facebook example)
• IAT H.264 / H.265 encoder is a device conducting the video encoding work outside a PC’s (or a smartphone) CPU to avoid
intensive graphic computation overloading the CPU. The PC (or smartphone) shown in our streaming system is for accessing
the encoder’s UI through a router (or smartphone’s WiFi) for encoder settings. (please page 2 for typical live streaming system)
• This User Manual will show you how to accessing the encoder’s UI (user interface) to input the URL, and streaming key into
the encoder for live streaming settings.
• The settings will bring the video encoding task to outside of a PC or Smartphone’s CPU, and then transmitting the encoded
video through a Router or a 3G/4 Mobile network. The setting steps will including followings
1.) Accessing encoder UI (through its default IP address i.e 192.168.1.168) : For knowing how to check and change your PC’s IP
address, and access encoder’s UI, please check following YouTube Demo Video
• https://youtu.be/HInGLNUMJGU
• https://youtu.be/v0yCYIBfhtE
2.) Enable or disable LAN (local area network) URL (This function is good for viewing monitor locally)
3.) Enable and input Facebook or YouTube’s URL and Streaming Key into RTMP for WAN (Wide area network)
4.) Adjusting the encoder’s video input
P1 [email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
IAT – WiFi encoders Router
Router
Internet
3G/4G/5G
iPhone / Android
Smartphone
IAT – encoders
PC
Typical Live Streaming System using IAT’s Encoders
RJ45 cable
Video Source
or RJ45 cable
or
P2 [email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
P3 [email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
Status Page showing your current live streaming status Encoder Page showing your current live streaming settings
LAN settings
WAN settings
Video settings
OSD Page allowing to show text, photo, banner in your steaming
Next Page showing System page
Allowing you set the linking method
1.) Network is for wired connecting
2.) WiFi is for setting encoder in AP
mode or STA mode
Once make setting change please make
sure click Apply and then Reboot
1.) WiFI approach 1
( Set at AP mode for H.264 or H.265 encoder):
This is the easiest way for settings WiFi
For a WiFi encoder to be operated under AP mode
YouTube Demo Link https://youtu.be/iEiGgnsF_Dw
2.) WiFI approach 2: ( Set at STA mode for H.264 or WiFi mode for H.265 encoder):We recommended approach to set your smartphone as a WiFi Hotspot Note: there are few smartphone band may not have the WiF hotspot function built in, please double check your smartphone settings)
For a WiFi encoder to be operated under STA mode
YouTube Demo Link https://youtu.be/rN7WQomfc9Y
P4 [email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
3.) Wired approach:
Encoder is connecting to router using a RJ45 cable
YouTube Demo Link https://youtu.be/v0yCYIBfhtE
Please check Page 5 for a Wired Live streaming network
Router
Internet
IAT – encoder
Encoder IP 192.168.1.168
Router ‘s IP 192.168.1.1
PC’s IP 192.168.1.2
Please ensure all IP address are in the same root
i.e. 192.168.1. xxx for live streaming to a social media server
A common mistake happened in wired live streaming settings is a user may only changing PC’s IP address
but forgot to make the router’s IP address in the same root. As a result, he can only see streaming in LAN
path. Because the router’s IP address is not in the same 192.168.1.xxx root….the live streaming signal
will not be able to go to internet ( WAN path) to the social media server such as YouTube, Facebook…etc
LAN Path
WAN Path
PC’s IP 192.168.1.1
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
P5
First, Obtain and copy down your
YouTube or Facebook’s
Server URL & Streaming Key
For accessing Encoder’s UI settings
using a smartphone or iPad
For accessing Encoder’s UI settings
using a PC & Router
Wireless Encoder
Setting approach
Encoder Wired Internet
setting approach
1.) Remember your Smartphone or iPad's WiFi Hotspot's SSID , and
password.
2.) Set the encoder at AP mode, and then use smartphone or iPad (not
in hotspot mode) WiFi linking to the encoder in AP mode (password:
12345678), and accessing encoder's UI (using IP address 192.168.8.8)
3.) Once you get into the encoder, go to encoder's System/ WiFi,
change the encoder from AP mode to STA mode, and also input
Smartphone or iPad's hospot's SSID and password in the encoder's field.
Click Apply, then Click Reboot to ensure the changing.
4.) After reboot, the encoder is in STA mode, and it with look for the
Smartphone or iPad's WiFi hotspot.
5.) You change the Smartphone or iPad to WiFi hotspot, once
established you can check if there is one device connecting to
Smartphone or iPad's WiFi hotspot .
It should be similar to what we show in our YouTube Demo video (at
2:01)
https://youtu.be/rN7WQomfc9Y
For further setting details, please read through the whole manual
Easy way
**VERY IMPORTANT (most of case of fail in live
streaming is due to incorrect / inconsistent IP address
settings in your PC and Router IP address ***
As you are using a PC to accessing the encoder’s UI,
First, you will have to set both PC, and router’s IP
address matching the encoder’s default IP address!
Please read Page 31 Q&A question A for the IP setting
information.
Quick Guide
[email protected] www.iat101.com www.peephole-store.com www.ezdiybroadcast.comP6
What information you need to have before the encoder settings?
1. ) You will need to how to obtain and copy down the Server URL and Streaming Key for input them into RTMP Publish
URL within the encoder
For Facebook, please log into your Facebook account www.facebook.com/live/create, and get the Server URL and
Streaming Key information. (please check page 15 for YouTube, Page 17 for Facebook example)
Note: If you are using PC and Smartphone for live streaming, both Facebook, and YouTube will give different Streaming
Key based on your device. i.e. PC has PC’s streaming key, Smartphone has its own streaming key, please DO NOT mix
the streaming key when using the encoder. For example, you input PC’s streaming key to encoder, and then use a
smartphone for live streaming, it will not work. You have to input Facebook provided smartphone streaming key for
smartphone live streaming.
2.) For encoder with WiFi function, please obtain the SSID and Password from your smartphone when the Smartphone
is set as a WiFi Hotspot.
For knowing how to set your smartphone as a WiFi hot sport,
please watch our YouTube Demo Link� https://youtu.be/rN7WQomfc9YUsually the SSID is your smartphone ID, and Password is your phone number.
Notice: To set your smartphone as a WiFi hotspot is not turning on the smartphone’s WiFi. You have to go to smartphone’s
Settings / More / Mobile network sharing …and then turn on Portable WiFi Hotspot (after turn on, click again to find the SSID, and Password within the Portable WiFi Hotspot Settings
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
P7
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
P8
How to make the encoder for live streaming?
There are 3 important STEPS for making the video encoder functional for live streaming
STEP1 : Accessing the encoder’s UI through its control panel at IP address: 192.168.1.168 (in case not able to access the encoder UI,
please watch our YouTube video for checking and changing LAN iP address� https://youtu.be/HInGLNUMJGU
(You may watch our YouTube Demo Video for How to accessing the encoder UI, Video Link� https://youtu.be/v0yCYIBfhtE
STEP 2: Change encoder’s settings (there are 2 sections of live streaming system LAN and WAN, please referring to Appendix iv Page 19)
a.) For local area network LAN live streaming settings ---
Enable or Disable Live Streaming URLs (application such IPTV)
b.) For WAN live streaming to Youtube, Facebook----
Enable and input Server URL and Streaming Key to the RTMP Publish URL (for wide area network WAN live streaming ,
such as live streaming to Facebook Live, YouTube, other social media network)
c) The most important part of the setting �>Input your correct DNS1 address in Encoder’s Network settings (as shown in
Page 8)
If the encoder is with WiFi Antenna for mobile WiFi link capability, you will have to do additional setting.
d.) Enable WiFi (select STA), and input correct SSID and Password
STEP 3:Apply setting changes, and Reboot the encoder.
Once you get both A.) Live Streaming Server URL and Streaming Key B.) WiFi hotspot SSID and Password information,
and you are ready to accessing the encoder, and make settings.
Accessing the encoder’s User Interface (UI)
WiFi Router
Internet
RJ45 cable to router
For the first time using, you will have to use a PC or a Smartphone link to the Router to accessing the encoder’s UI for changing
encoder’s default setting for live streaming applications.
a.) Connect a RJ45 cable from a working router to the encoder, and power on encoder
After waiting about 1 to 2 minutes
b.) Open a Google Chrome (or IE) web browser in PC (or a Smartphone ), and input 192.168.1.168
and then following the graph in next few pages
The very first time of setting
a PC or a Smartphone WiFi linked to the
router for controlling the encoder externally
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
P9
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
admin
admin
Default input
Default IP address (please configure your PC and Router make sure in the same subset
P10
Log into the encoder’s UI
***Note: if you are not able to get this page work, please contact seller for
knowing how to change your internet IP address for getting the encoder setting temporary
email us for change IP address information: [email protected]
Once getting into the web UI (user interface), check the encoder’s current Status
There are total of 4 different streaming servers can be used for
streaming at the same time
However, for having a better / stable streaming bandwidth, we
would recommend disable any un-used sub-streams
P11
Please check the input video size:
The main stream encoder size can not have a higher video size than the input
video size (now it shows 1920x1080@ 0 meaning no video coming to the
encoder)
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
Under encoder Status directory, you can check which streaming URL is enable or disabled
We also recommend disable any unused URL
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
Click into Main Stream directory for setup
Enabling the URL you want to do streaming
P13
Enable RTMP URL for streaming to Facebook, YouTube etc.
Input the Server URL and streaming key
Standard format is rtemp:// Server URL /streaming key
For example input for YouTube live streaming
rtmp://a.rtmp.youtube.com/live2/1234567890123456
Please refer to Appendix II or III
for Live streaming YouTube /Facebooks URL examples
Usually I will enable TS URL , and RTSP URL
and linked using VLC Media player for
LAN (local area network) streaming
Please see Appendix I for using VLC
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
Important!!!!To make the router be able to send streaming video into internet, you need to set the encoder’s network DNS1 correctly (This section is
for using PC as a control center, if you are using a smartphone please ignore this section). First you need to check what is your network’s
iPv4 address (it can be found in Control panel/network and Internet/Networks connections/ Local Area Connection/Properties/
Click Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get your Network Connection details as following
Without this part, you can only see streaming within LAN (local area network), for WAN you must input the correct IP address into DNS1
192.168.1.99
1. Check your router network
connection details
2. Then input the IP address to DNS1
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
If you are buying an Encoder with WiFi function , please link to the WiFi router (or hot spot) and make sure input the
correct WiFi password of the WiFi router or Smartphone’s hot spot
(Note: the encoder must have the antenna port in order to have WiFi function. A Wired encoder model with no Antenna
that can not use this WiFi section, please disable WiFi)
)
xxxxxxxxxxxxxxxx
Input your smartphone WiFi hotspot
SSID and password.
Please referring our YouTube Demo video for how to set a
Smartphone as a WiFi hotspot
https://youtu.be/2mqAylckNVo
P15 [email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
Streaming to Social Media ServicesThe RTMP function of the encoder can be used for a direct RTMP to a Social Media Broadcaster service (as shown in the list ) without a
streaming engine However, if you want to live streaming to YouTube with a very low latency streaming we would recommend you RTMP to
Wowza’s Streaming Engine first then forwarding the stream to YouTube / Facebook , etc. Please see Appendix II
Streaming Engine 1
Wowza Streaming Engine
Wowza’s service offering a
However it is a pay service
Social Media Broadcaster service
IAT – encoder (wired)
Router
IAT – encoder (WiFi)
Internet
Router
Internet
Router
Very low latency streaming
Streaming Service CDN
Streaming Engine 2
IAT – encoder (wired)
IAT – encoder (WiFi)P16
Please check next page for additional live streaming system configurations
Router
IAT – encoder (WiFi)
Internet
Router
IAT – encoder (WiFi)
Router
IAT – encoder (WiFi)Router
IAT – encoder (WiFi)
Not recommend wiring approach
Encoder IP 192.168.1.168
Router IP 192.168.1.1
PC IP 192.168.1.1
Please check all PC, Router, and Encoder’s IP address are in the same range.
P17
1.A 3G/4G or 5G smartphone is set a WiFi hot spot so both encoder and Tablet are WiFi linking to the
WiFi hotspot smartphone.
2. For how to set a smartphone as a WiFi hotspot, please watch our YouTube Demo video,
https://youtu.be/rN7WQomfc9Y
Streaming Engine 1
Wowza Streaming Engine
Wowza’s service offering a
very low latency streaming
However it is a pay service
Social Media Broadcaster service
Internet
InternetRouter
Streaming Service CDN
Streaming Engine 2
Portable solutions using a Smartphone Phone
3G/4G/5G
3G/4G/5GIAT – encoder (WiFi)
IAT – encoder (WiFi)
iPhone / Android
Smartphone set as a WiFi Hotspot*
Window Tablet
P18
or
Appendix I : Checking local area network LAN streaming using VLC media player
(page1)
Click and open Network Stream, and then select Network
P19
Note: for using VLC, you are VLC’s software decoder viewing video within LAN. The software decoding will cause
time delay in viewing video. However, the live streaming video to WAN internet to Facebook or YouTube does not
have issue in delay due to VLC’s software decoding
Input an enabled Network URL, such as
rtsp://192.168.1.168/0 or http://192.168.1.168/0.flv or http://192.168.1.168/0.ts
We found the rtsp sometime has less time delay in latency in our network system. You may like to
play and check which URL IP address has a better speed in streaming within your PC system.
In case the enabled of Network URL not able to link due to the some unknown setting of your PC
and internet system, you may like to try to enable a different Network URL
Appendix I : Checking local area network LAN streaming using VLC media player
(page2)
P20
A typical LAN streaming display window using VLC medial Player
Streaming URL
Appendix I : Checking local area network LAN streaming using VLC media player
(page3)
P21
Appendix II. RTMP Live Streaming to your YouTube Channel
In encoder’s RTMP PUBLISH URL setting, you input following it will triggering YouTube Live.
Please enable RTMP Publish URL use following rtmp://a.rtmp.youtube.com/live2/ [YouTube streaming Key]
i.e. rtmp://a.rtmp.youtube.com/live2/ xxxx-xxxx-xxxx-xxxx
Note: If you using home internet and smartphone at different time for YouTube live streaming, please make sure
have the correct streaming key input into the encoder, Youtube will give different streaming keys for different
connections
P22
https://support.google.com/youtube/answer/2853702?topic=2853713&ctx=topic
Encoder settings
Protocol: RTMP Flash Streaming
Video codec: H.264, 4.1 for up to 1080p 30 FPS
H.264, 4.2 for 1080p 60 FPS
H.264, 5.0 for 1440p 30 FPS
H.264, 5.1 for 1440p 60 FPS
H.264, 5.1 for 2160p 30 FPS
H.264, 5.2 for 2160p 60 FPS
Frame rate: up to 60 fps
Keyframe frequency: Recommended 2 seconds do not exceed 4 seconds
Audio codec: AAC or MP3
Bitrate encoding: CBR
Recommended advanced settings
Pixel aspect ratio: Square
Frame types: Progressive Scan, 2 B-Frames, 1 Reference Frame
Entropy coding: CABAC
Audio sample rate: 44.1 KHz
Audio bitrate: 128 Kbps stereo
Appendix II. YouTube suggested encoder setting parameters
P23
Appendix III (page 1). Facebook Live streamingplease select External Device and copy both URL and Stream Key to Encoder’s RTMP Publish URLNote: If you using home internet and smartphone at different time for Facebook live streaming, please make sure
have the correct streaming key input into the encoder, Facebook will give different streaming keys for different
connections
Copy this key as stream key
P24
Use your smartphone log into www.facebook.com/live/create, and copy Facebook mobile
phone's stream key and paste it into Encoder's RTMP URL.
Note: if you are using an iPhone or iPad (iOS device) for Facebook live streaming, please ensure you have
a flash enabled web browser. If you don’t have one, please download the free software is called " Puffin
Web Browser".
Appendix III (page 2). Facebook Live streaming
For Facebook Live,
please make sure click
Go Live for streaming
P25
Appendix iv Encoder Setting Parameter
This section is for LAN
(local area network Live
streaming applications,
such as IPTV )
This section is for WAN
(Wide area network Live
streaming to Facebook,
YouTube…etc)
P26
(for most of case, please don’t change it. Just keep the Advanced setting with its default value)Deinterlaced:
Select Bottom only, if your signal is deinterlanced, such as 1080i,576i
Net Drop Threshold 50-50000
If packet that don’t transmit over threshold value, will drop
TS Muxer
Decoder Compatibility
TS once pack:
One packet is 188 Byte
ts_transport_stream_id
ts_pmt_start_pid:
ts_start_pid:
ts_tables_version:
ts_service_name:
ts_service_provider:
Parameter of Video Stream
TS Empty Packet:
Insert Empty Packet
TS password enable:
Access TS stream needs password when it is enable
Vmix Compatible:
If you need to pull rtsp stream in Vmix, please enable it.
TS OVER RTSP:
Package Method
Multicast type:
Transport Method in Multicast
Slice split enable:
Slice size:
Split Slice in frame
MIN_QP:
MAX_QP:
Bitrate Control
SAR (H.264 Only):
Storage Aspect Ratio, when you run 16:9 in SD Resolution
CSC
Brightness:
Contrast:
Hue:
Saturation:
Image Quality Control
P27
Internet
3G/4G/5G
IAT – encoder (WiFi)
iPhone / Android
Smartphone
Tablet
IAT WiFi H.264 Encoder IAT Capture Cards
Display on tablet? Live Stream? Display on tablet? Live Stream?
Windows O/S yes yes yes yes
iPad iOS yes possible
Appendix v
Current capabilities of Portable Tablet PC or iPad Live Streaming Solution
using IAT’s Encoder or Broadcaster products
For any further product questions, please email us at [email protected]
P20P28
Note 1: the encoder is capable of live streaming to 4 IP addresses, if you are using only the main stream, please disable any sub-
stream not in using
Note 2: To make sure the encoder working with your internet link, please check your PC’s default gateway to see if the encoder’s
default IP address is within your PC’s IP subnet
a.) If you don’t know how to change your PC ‘s gateway IP address for opening encoder’s UI (User interface) IP address
(192.168.1.168), please referring our YouTube Demo video for how to check PC’s default gateway IP address, and change it to an IP
address compatible to the encoder https://youtu.be/HInGLNUMJGU
b.) To accessing the encoder for the first-time use, you have to use a router and RJ45 cable to log into its UI, and then change the
settings, such as switching the WiFi connection to a hotspot for mobile application or change the video input size, etc.
YouTube Demo video for setting a WiFi encoder link to a WiFi hotspot for mobile applications. https://youtu.be/nVLrs6C33cU
Note 3: We will keep updating this user manual, please come back to check the update occasionally for new update information
Additional Notes
P29
Other Important Notes for IAT mini encoders:
1. The mini encoder’s output can streaming up to max 4 streams (2x1080P+2x576P) at the same time. This streaming
capability is under the best transmission conditions using a wired connection to wide bandwidth internet connection.
2. If you are using only the main stream, please disable any sub-stream not in using to avoid wasting your encoder usage
bandwidth for a better video live streaming.
3. If you are using a WiFi encoder for live streaming, please avoid the wireless “Dead Zone”.
If your WiFi setting is within or near a “Dead Zone” area, the live streaming will be stopped due to no signal transmission. A
common mistake in no signal during live streaming is due to no WiFi signal transmission in a Dead Zone area. It is not due
to the encoder not working.
* Reading in WiFi Dead Zone, you may referring to following web link or Google the key words “WiFi Dead Zone”
www.makeuseof.com/tag/what-is-a-wireless-dead-zone-and-how-to-eliminate-it/
4. In case you keep changing the encoder set up for experiencing the device, and causing the encoder not working. The easy
way to make it working again is to “reset” the device by pressing the reset button for 8 -10 seconds to refresh the encoder.
5. If you are trying to live steaming from a remote location (such as inside a deep well, forest, at the high-top of a cliff or
mountain with no good WiFi setting and no 3G/4G mobile link to a base station, the wireless encoder will not be able to do
the live streaming. However, we have others solutions for remote location live streaming applications, please contact us for
products. [email protected]
P30
Q&A A.) How come I can only use FLV to view the video in LAN settings, but not able to see
Live streaming in WAN (in YouTube or Facebook)?
Ans: for most of case is your router IP address is not as same as your PC’s IP address.
You will have to change either one of the IP address to make the whole setting with consistent IP address. For example as followings
B.) I am able to live streaming to YouTube but it gets disconnected automatically within 5 to 10 min and YouTube show error of "OFFLINE" AND SHOW
DATA NOT RECEIVING?
Ans: For most of case, you may like to double check your internet bandwidth over some period of time using the free software Speed Test to ensure
your video transmission system is good and stable having enough bandwidth for live streaming to YouTube or Facebook.
Also you may like to try followings,
1.) for video setting, please try to fix the video source with fixed video format (such as 720P with 30F/s or 720P with 60F/s), and for encoder's output
video please also try to set as 720P with 30F/s.
2.) set audio at AAC 48000 sample
3.) It is also better to check the video source keeps sending stable video to the encoder.
4.) If you also using the splitter during the live streaming, please make sure having a stable power source for the switch.
5.) During live streaming, please don't use PC to browsing internet that would causing the router transmission bandwidth fluctuations.
6.) If your video source is a motion-detect or a timing device that stopping sending video to encoder that would also causing no data, and then offline.
7.) If you are using a WiFi encoder for live streaming, please avoid the wireless “Dead Zone”.
If your WiFi setting is within or near a “Dead Zone” area, the live streaming will be stopped due to no signal transmission. A common mistake in no
signal during live streaming is due to no WiFi signal transmission in a Dead Zone area. It is not due to the encoder not working.
* Reading in WiFi Dead Zone, you may referring to following web link or Google the key words “WiFi Dead Zone”
www.makeuseof.com/tag/what-is-a-wireless-dead-zone-and-how-to-eliminate-it/
Encoder default
IP address
Router IP
address
PC’s IP address &
Default gateway
Preferred DNS Server
Alternate DNS Server
192.168.0.31 192.168.0.1 192.168.0.99
192.168.0.1
192.168.0.168
8.8.8.8
192.168.1.168 192.168.1.1 192.168.1.99
192.168.1.1
192.168.1.96
8.8.8.8
P31 [email protected] www.iat101.com www.peephole-store.com www.ezdiybroadcast.com
C.) I have trouble to change my router IP address to 192.168.1.xxx range for getting all encoder, PC and router’s IP in the same
192.168.1.xxx rang. What else I can do?
Ans: Yes, you can change the encoder’s IP address to match your router IP range. For example, you router IP default IP address is
192.168.0.1., and your PC is capable are to linking to internet now. That means your PC IP address is also in the IP range, ie.
192.168.0.11.
So to make the encoder IP address matching your internet default IP, please do the following steps:
1. Change PC’s IP address to 19.168.1.1 for accessing the encoder’s UI that with the default IP address 192.168.1.168
2. Once inside the encoder’s UI, please change encoder’s IP address to 192.168.0.168 (this is to match encoder IP to router’s IP range)
3. After save and reboot the encoder, please change your PC IP address back to 192.168.0.1, such that all of your encoder, PC, and
router’s IP address are in the same IP range.
(note: reboot the encoder is total different from the reset. If you reset the encoder, the encoder’s IP address will back t0 192.168.1.168
P32
D.) I am using VLC to view the live streaming video through my PC, how come there is a few seconds of video delay?
Ans: Please check following typical live streaming configuration. There are 2 live streaming paths, one is in LAN Local area network),
and another is WAN (wide area network).
For LAN path: the video stream is from encoder WiFi to Router, and then to PC. When you using VLC to view the live video within
LAN (through RTSP url) you will use the VLC’s software decoder to decode the video for view on PC screen. The decoding speed
depending on the VLC’s settings, and your PC’s CPU speed. If you have a slow CPU, and no good VLC settings, that would cause
more video delay.
For WAN path: the video stream is from encoder (RTMP) WiFi to Router, and then internet to Media Server. The video delay in WAN
path with depending on your internet bandwidth, and Media Server’s video decoding speed.
NOTE: For WAN path, please make sure you have all encoder, PC, and router’s IP address in the same 192.168.1.xxx range.
If you only have the encoder and PC’s IP address in the same 192.168.1.xxx range, and router in 192.168.0.xxx, you will not be able
to live streaming through the WAN path. You can only see video within LAN path.
IAT – encoder (WiFi)Router
Media Servers
P33
Some Additional Advice
• Please make sure to reboot the encoder if you made any change in the setting
• If you thought the setting result (streaming) stuck or glitch or looks like mal-function,
• Please “reset” the encoder to start over your settings.
• Because the encoder is a graphic processer, just like a graphic card or GPU in PC is a
computational intense device, a correct setting will give you the optimal streaming.
• If you like to use an encoder for long-hour operation, please buy our encoder that does
with no “mini” in the model number.
1. IAT Encoder model with “mini” word is good for
portable application but not good for long-hour
operation due to heat dissipation of the mini metal
case comparing to 2 -�
2. IAT Encoder model without the “mini” word is good for
long-hour operation
P34
Can I use IAT encoder to live streaming to some professional live streaming services?Yes, you should can, however most of them need monthly fee, and you may need to use their own software.
For using this encoder to RTMP to YouTube and Facebook for live streaming are free of charge, no any monthly fee.
P35
[email protected] www.iat101.com www.peephole-store.com
www.ezdiybroadcast.com
• There are 4 basic methods allowing you do live streaming to Facebook, YouTube, etc.
(Please check available methods � https://youtu.be/LV9BWIFju6c )
Available Portable Low-cost Live Streaming Methods:Method 1: All smartphone Live Streaming APP software relying on the smartphone's GPU (Graphic Processing Unit) for video
processing that causing the smartphone getting hot quickly. If you are connecting a UVC capture card to a smartphone for live
streaming application, it would require the smartphone’s battery providing additional current to the UVC card, and cause the phone
getting hot more rapidly, and run out of the battery very fast which is no good for a smartphone's battery operation. So we don’t
recommend Method 1 for live streaming.
Method 2: You will need a PC with high speed CPU (3GHz above) for a stable live streaming, and a software (such as OBS, vMix,
or Wirecast) to input the streaming key for live streaming.
Method 3 & 4: The advantages of using the H.264 (or H.265) video encoder relieves the processing loading of the GPU (graphic
processing unit) . It brings all video processing work outside of a smartphone, and only using the User Interface (UI) for controlling
the encoder purpose. For accessing the encoder’s UI and input your streaming key, you will need a PC and router for the first-
time encoder settings.
This user manual will show you how to set up an IAT’s mini encoders including HDMI (wired / WiFi / 4G) and SDI (wired / WiFi / 4G) encoders for live streaming
P36
Our Live streaming solutions