11

ACCESSORIESINTERFACE D

Up to 24 kVApplicationFor use with connectors andbushings with an interface Das described by CENELEC EN50180 and 50181.

Technical characteristicsAll these products, except theearthing plug, are tested forAC withstand and partialdischarge prior to leavingthe factory.

606SOPStand-off plugIs designed to support and'dead-end' connectors with atype D interface when removedfrom equipment.

Ordering instructionsOrder606SOP for 12 kV orK606SOP for 24 kVapplications.

606GPEarthing plugIs designed to support andearth connectors with a type Dinterface when removed fromequipment.

Ordering instructionsOrder606GP for 12 or 24 kVapplications.

606DR-TPSDead-end receptacleFits over a bushing with a typeD interface to provide 'dead-end' facility.Contains a capacitive test pointfor checking circuit conditions.

Ordering instructionsOrder606DR-TPS for 12 kV orK606DR-TPS for 24 kVapplications.The dead-end receptacle canbe supplied with an earth lead.Order: -/G.E.g. 606DR-TPS/G.

6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV

12/20 (24) kV12.7/22 (24) kV

12

Kit MTEarthing kit for coppertape screened cablesContains a tinned copper braid(25 mm² - L = 500 mm), atinned copper wire for cleatingand water sealing mastic.

Ordering instructionsOrderKit MT for 12 kV or 24 kVapplications.

676RTPAReducing tap plugProvides a type A interfaceto connectors with a type Dinterface.A 'C' spanner, 600SW, is usedto tighten the reducing tap plugon to its mating part.

Ordering instructionsOrder676RTPA for 12 kV orK676RTPA for 24 kVapplications.Order 600SW for the 'C'spanner.

680CPConnecting plugFor connecting two or moreconnectors with a type Dinterface together, thus creatinga separable cable joint or amultiple cable connection toequipment.

Ordering instructionsOrder680CP for 12 kV orK680CP for 24 kVapplications.Order: -/ATEX for use inpotentially explosiveatmospheres (for 12 kV max.).

676BIPABasic insulating plugActs as a tightening nut for the676LRA/G tee connector kits.The plug contains a voltagedetection point.The conductive rubberprotection cap is included.

Ordering instructionsOrder676BIPA for 12 kV orK676BIPA for 24 kVapplications.

675BEBushing extenderProvides an extension pieceto allow cables to stand awayfrom equipment.Is used in conjunction with the680CP connecting plug.

Ordering instructionsOrder675BE for 12 kV orK675BE for 24 kVapplications.