How to setup QuickSPC to export data in
TEXTor EXCEL®-compatible
format
1) Open Gage Explorer and select“Data Transfer”
2) Click on “START”
STEP #1
Selecting Data Files & Filter type
METHOD #1
• Select Filter
• MOVE or Drag & Drop data filesbetween panes
1) Select the desired filter
2) Press button• “Move selected” to move one data file ata time from left to right pane
OR• Drag & Drop data file(s) from left paneto right pane
OR• “Move all” to move all data files fromleft pane to right pane
Click here to move one data file
Click here to move all data files
3) Verify filter choice
METHOD #2
• Modify individual data files
3) Select the data file that you wantstored as either TXT or CSV
4) Right Click on the data file
5) Click on “change filter”
6) Select the desired filter
7) Press OK
8) Verify filter choice
STEP #2
Specifying:
• DATA FORMAT
• TRIGGERS
9) Click on ICON
10) Double Click on format
11) Select the desired fields tobe stored inside the file -
SEE IMPORTANT NOTEON NEXT SLIDE
IMPORTANT NOTEThe maximum number of columns allowed in Excel
is 256 !Therefore, the following formula applies:
(Number of characteristic columns) x
(Number of measurements) +
1 for date & time---------------------------------------------
must be less than 256
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
12) Click on Triggers tab
Be sure you have at least one Trigger programmed,otherwise
13) Right click inside this Window
14) Select “New”
15) Use “Trigger Wizard” toprogram a trigger
16) SAVE
17) Click on Data Apply