Hose for theCompressed Gas &Cryogenic Industry
your single-source supplier
Precision Hose for Compressed Gas
& Cryogenic Applicationsnisource Manufacturing Inc. off ers the industry’s fi nest hose products for the transfer of high-pressure gas and cryogenic liquids. Our name says it all. Unisource is a complete source for all types of fl exible hose—metallic, PTFE, and thermoplastic. Since 1980, we have become one of the leading suppliers to the gas industry
throughout North America. Our product line includes gas pigtails and liquid transfer hoses to accommodate all varieties of industrial, medical, and specialty gases in a wide range of pressure ratings.
Unisource Manufacturing, Inc., based in Portland Oregon off ers a broad array of special services to assure the highest product quality, backed by outstanding customer support.
Unisource Off ers these State-of-the-Art Products
and Services:
1. The Highest Quality High-Pressure Cylinder Filling Hoses & Tube Trailer Hoses...PTFE Style Gas Pigtail—PTFE or Tefl on® is chemically inert, virtually impermeable, and contributes to an extremely fl exible and long-life product. Our PTFE pigtail products range from ratings of 3000 PSIG to 6000 PSIG maximum working pressure. Our TSCZ PTFE hose features a thicker inner wall with two stainless steel braids. These features reduce permeation dramatically, while improving pressure resistance. We off er brass or stainless steel permanently attached end fi ttings.All-Metallic, Welded Style Gas Pigtail—Typically used for specialty, high-purity, or corrosive gas applications, all-metallic pigtails provide a zero-eff usion solution. Products include corrugated interior core of 316L stainless steel or Monel®, with multiple exterior stainless steel braids for pressure ratings as high as 4500 PSIG maximum working pressure. Fittings of 316L or Monel are permanently welded to provide a complete pigtail assembly.Thermoplastic Style Gas Pigtail—Unisource thermoplastic pigtails are an economical choice for many types of industrial gases. Our thermoplastic hoses combine a Nylon® or Polyester Elastomer Core with polyester reinforcing and perforated polyurethane cover. These fl exible, lightweight, and durable hoses are available in standard 3000 PSIG maximum working pressure rating or in special order runs as high as 4500 PSIG maximum working pressure.Tube Trailer Hoses—Our product line includes all-stainless steel, welded SF32HP 3700 PSIG maximum working pressure, and PTFE lined TSHP hoses for pressures to 5000 PSIG maximum working pressure.
2. FittingsOur standard 1/4” fi ttings are specially designed to meet “ANPT” specifi cations. ANPT (Aerospace Spec.) are machined to a much tighter tolerance than standard NPT fi ttings. Perfect for specialty gas applications, ANPT will ensure the highest leak integrity possible.
3. The Industry’s Most Popular Liquid Cryogenic Hoses...For Liquid Cylinder Filling and Withdrawl—Ultrafl ex all-stainless steel hose is the most fl exible and easy to handle product in the industry. Our fi nest liquid cylinder hose, Ultrafl ex is ISO 10380 certifi ed for cycle life. Superfl ex liquid cylinder hoses are our standard duty product. Both hoses are equipped with machined fl are ends and optional armor casing.Bulk Cryogenic Hose—Unisource bulk cryogenic assemblies are constructed with all-stainless steel corrugated hose, stainless steel braid, and welded stainless steel female NPT ends. CGA adapters can be added at customers request—either threaded or silver brazed. Armor kink-resisting sleeves are added to each end of the assembly.
4. In-House O2 Cleaning and Testing...Unisource maintains control of all cleaning functions in our in-house cleaning facility. All cleaning and packaging is performed to C.G.A. standards. Cleaned hoses are clearly marked and tagged as “cleaned for oxygen service.”We hydrostatically test 100% of all high-pressure gas pigtails and tube trailer hoses to 1-1/2 times the rated working pressure of the hose. Specialty gas hoses are tested with high purity helium. Hoses are individually marked with working pressure, test pressure, and date tested. Mass spectrometer helium leak testing can be performed at customer request. All liquid cylinder hose and bulk cryogenic hose are pneumatically tested prior to fi nal packaging.
1Portland, OR 1-800-234-2566your single-source supplier
Hose for tHe Compressed Gas & CryoGeniC industry
PagePTFE & ETFE Lined Stainless Steel Braided Pigtails Style TSC PTFE Lined .................................................................3000 psi .............................................................. 2 Style TSCZ Post-Sintered PTFE ...............................................3600 psi .............................................................. 3 Style TSCZEL ETFE ......................................................................3000 psi .............................................................. 4 Style TSCZELZ ETFE ....................................................................3500 psi .............................................................. 4 Style TSHD PTFE Lined ..............................................................6000 psi .............................................................. 5
All-Metallic Gas Pigtails Style UFHP22 Specialty Gas Pigtail ......................................3850 psi .............................................................. 6 Style SF4500 Extreme Pressure Stainless Steel ................4500 psi .............................................................. 6
Special Application Gas Pigtails Style SF82 Monel® Hybrid .......................................................3000 psi .............................................................. 7
Tube Trailer Hose Style TSHP (PTFE Core) .............................................................5000 psi .............................................................. 8 Style SF32HP (Stainless Steel) ................................................3700 psi .............................................................. 8 Style SF82 Monel ........................................................................2500 psi .............................................................. 9 Cryogenic Liquid Cylinder Hose Style UF21 “Ultraflex” S/S Hose ............................................................................................................................10
Bulk Cryogenic Hose, CO2 Delivery Hose, CO2 Beverage Hose Style SF21 Bulk Cryogenic Hose ..........................................................................................................................11 Style 2520FDA Rubber CO2 Bulk Delivery Hose ...........................................................................................12 Style 4770 Beverage CO2 Delivery & Cylinder Hose ....................................................................................13 CGA Nuts & Nipples ..........................................................................................................................................................14 High Pressure Pigtail Selection Guide ........................................................................................................................15 Tube Trailer Hose Selection Guide ..............................................................................................................................15 Corrugated Metal Hose Velocity Calculation ...........................................................................................................15
your single-source supplier
Portland, OR 1-800-234-25662your single-source supplier
PTFE Lined Stainless Steel Braided Pigtails
Style TSC
“Safety Pigtail” Style TSC with Stainless Steel Armor Casing
Specify overall length – change xx” in part number to desired overall length.
Style TSC - 3000 PSIG Rated w/ Brass End Fittings
Style TSC is an economically priced, flexible, lightweight, and durable pigtail that has become the industry standard for cylinder fill manifolds. These pigtails surpass the requirements of CGA E.9, and are constructed with a smooth PTFE inner core, and series 300 exterior stainless steel braid. An optional anti-whip, anti-kink “Safety Armor” is available for added protection. Each hose is marked with an aluminum belly band noting the working pressure and date manufactured. All assemblies are pressure tested per CGA E.9 to 1-1/4 times the working pressure and have a minimum burst pressure rating 4 times the maximum working pressure. A full range of end fitting options are available, allowing you to custom design the pigtail for your specific application.
Specify overall length – change xx” in part number to desired overall length.
Stainless Steel fitting-per end (244)Stainless Steel special swivel fitting (244S)
Oxygen Service - A brass extension adaptor (BE-4-3HP) is recommended on all “PTFE” type hoses, to absorb the heat generated by adiabatic compression.
Style TSC flexible pigtails have a minimum burst pressure rating 4 times the maximum working pressure. The stainless steel armor casing allows free movement of the hose and protects the hose from damage. This casing also acts as a bend restrictor to prevent kinking near the connections and to enhance whip protection in the event of a cylinder falling or other similar incidents. Oxy-Extension Piece BE-4-3HP is recommended in oxygen applications to absorb the heat experienced in adiabatic compression and eliminate possible damage to the PTFE tube if the pigtail is quickly pressurized with oxygen against a closed valve or regulator.
Notes: 1. DVP specifies the distance volume piece (DVP) threaded on. 2. For acetylene applications, use specify 5TSCB in the part number instead of 5TSC. This hose has a black, static-conductive PFTE core.
1/4” 0.375” 0.55” 1 3.0” 3000 PSIG 12,000 PSIG
HOSE I.D. O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
5TSC-144-144-xx” 1/4” Female NPT Inert
5TSC-144-144-xx”-CCB 1/4” Female NPT Oxygen Clean
5TSC-144-DVP-xx”-CCB 1/4” FNPT x 1/4” FNPT DVP Oxygen Clean
5TSC-DVP-DVP-xx”-CCB 1/4” FNPT DVP x 1/4” FNPT DVP Oxygen Clean
HOSE PART # ENDS SERVICE
5TSC-144-144-xx”-A 1/4” Female NPT Inert
5TSC-144-144-xx”-A-CCB 1/4” Female NPT Oxygen Clean
5TSC-144-DVP-xx”-A-CCB 1/4” FNPT x 1/4” FNPT DVP Oxygen Clean
5TSC-DVP-DVP-xx”-A-CCB 1/4” FNPT DVP x 1/4” FNPT DVP Oxygen Clean
HOSE PART # ENDS SERVICE
3Portland, OR 1-800-234-2566your single-source supplier
“Safety Pigtail” Style TSCZ with Stainless Steel Armor Casing
Style TSCZ - 3600 PSIG Rated w/ Brass End Fittings
Specify overall length.– change xx” in part number to desired overall length.
Specify overall length – change xx” in part number to desired overall length.
Plastic or BrassHandtight Nut and
Nipples
PTFE Low Effusion Stainless Steel Braided PigtailsStyle TSCZ
Style TSCZ pigtails are designed to meet the industries toughest standards, and represent the very latest in PTFE technology. Style TSCZ pigtails feature a “Unisource proprietary” PTFE inner core that dramatically reduces permeation and a second layer of stainless braid reinforcement to increase the pressure rating to 3600 psig. An optional anti-whip, anti-kink “Safety Armor” is available for added protection. Each hose is marked with an aluminum belly band noting the working pressure and date manufactured. All assemblies are pressure tested per CGA E.9 to 1-1/4 times the working pressure and have a minimum burst pressure rating 4 times the maximum working pressure. A full range of end fitting options are available for Style TSCZ, allowing you to custom design the pigtail for your specific application. The Style TSCZ is ideal for a wide variety of applications and will provide longer life with reduced permeation.
Notes: 1. DVP specifies the distance volume piece (DVP) threaded on.
1/4” 0.43” 0.64” 2 3.5” 3600 PSIG 14,400 PSIG
HOSE I.D. O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
5TSCZ-144-144-xx” 1/4” Female NPT Inert
5TSCZ-144-144-xx”-CCB 1/4” Female NPT Oxygen Clean
5TSCZ-144-DVP-xx”-CCB 1/4” FNPT x 1/4” FNPT DVP Oxygen Clean
5TSCZ-DVP-DVP-xx”-CCB 1/4” FNPT DVP x 1/4” FNPT DVP Oxygen Clean
HOSE PART # ENDS SERVICE
5TSCZ-144-144-xx”-A 1/4” Female NPT Inert
5TSCZ-144-144-xx”-A-CCB 1/4” Female NPT Oxygen Clean
5TSCZ-144-DVP-xx”-A-CCB 1/4” FNPT x 1/4” FNPT DVP Oxygen Clean
5TSCZ-DVP-DVP-xx”-A-CCB 1/4” FNPT DVP x 1/4” FNPT DVP Oxygen Clean
HOSE PART # ENDS SERVICE
Options for Style TSC and Style TSCZ (fitting part number change in parenthesis):
Brass 90 Degree Elbow (BEL-4HP) installed and pressure testedBrass Male NPT (114) end fitting instead of Female NPT (144)Brass street elbow installed and pressure tested (BL-4HP)Brass CGA Nut and Nipple installed and pressure testedBrass CGA Handtight Nut and soft-tip nipple installed and pressure testedBrass CGA Nut and Check Valve Nipple installed and pressure testedBrass Extension Adapter (BE-4-3HP)316SS MNPT fitting-per end (214)316SS CVR, VCO and tube fittings
Portland, OR 1-800-234-25664your single-source supplier
ETFE Lined Stainless Steel Braided Pigtails
Style TSCZEL (3000 - PSIG) Style TSCZELZ (3500 - PSIG)
Style TSCZEL - 3000 PSIG Rated w/ Brass End Fittings
Specify overall length – change xx” in part number to desired overall length.
“Safety Pigtail” Style TSCZEL & TSCZELZ with SS Armor Casing
Style TSCZEL & TSCZELZ are constructed with a smooth-bore ETFE lining, which offers 75% less effusion than standard PTFE pigtails. These assemblies are an economical choice for small molecule gases such as helium and hydrogen. Style TSCZEL is a 3000 PSIG hose with a single braid of stainless steel. Style TSCZELZ is a 3500 PSIG hose with two braids of stainless steel. An optional “Safety Armor” is available for added protection. Each hose is marked with an aluminum belly band noting the working pressure and date manufactured. All assemblies are pressure tested to 1-1/4 times the working pressure. End fittings are offered in both brass and stainless steel. Rated to +250°F. Not recommended for oxygen service.
Style TSCZELZ - 3500 PSIG Rated w/ Brass End Fittings
Specify overall length – change xx” in part number to desired overall length.
Options for Style TSCZEL and Style TSCZELZ (fitting part number change in parenthesis): Brass 90 Degree Elbow (BEL-4HP) installed and pressure testedBrass Male NPT (114) end fitting instead of Female NPT (144)Brass street elbow installed and pressure tested (BL-4HP)Brass CGA Nut and Nipple installed and pressure testedBrass CGA Handtight Nut and soft-tip nipple installed and pressure testedBrass CGA Nut and Check Valve Nipple installed and pressure tested316SS MNPT fitting-per end (214)316SS CVR, VCO and tube fittings
1/4” 0.375” 0.55” 1 3.0” 3000 PSIG 12,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
5TSCZEL-144-144-xx” Brass 1/4” Female NPT Inert
5TSCZEL-244-144-xx” Stainless 1/4” Female NPT Oxygen Clean
HOSE PART # ENDS SERVICE
1/4” 0.43” 0.64” 2 3.0” 3500 PSIG 14,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
5TSCZELZ-144-144-xx” Brass 1/4” Female NPT Inert
5TSCZELZ-244-144-xx” Stainless 1/4” Female NPT Oxygen Clean
HOSE PART # ENDS SERVICE
5TSCZEL-144-144-xx”-A Brass 1/4” Female NPT Inert - 3000 PSIG
5TSCZEL-244-244-xx”-A Stainless 1/4” Female NPT Inert - 3000 PSIG
5TSCZELZ-144-144-xx”-A Brass 1/4” Female NPT Inert - 3500 PSIG
5TSCZELZ-244-244-xx”-A Stainless 1/4” Female NPT Inert - 3500 PSIG
HOSE PART # ENDS SERVICE
Specify overall length – change xx” in part number to desired overall length.
5Portland, OR 1-800-234-2566your single-source supplier
PTFE Lined Stainless Steel Braided Pigtails – 6000 PSIGStyle TSHD
Style TSHD is designed for the most demanding of high pressure applications. This hose is constructed with a smooth bore PTFE inner core, four layers of stainless steel braid, and rated for 6000 psig MAWP. An optional anti-whip, anti-kink “Safety Armor” is available for added protection. Each hose is marked with an aluminum belly band noting the working pressure and date manufactured. All assemblies are pressure tested to 1-1/2 times the working pressure and have a minimum burst pressure rating 4 times the maximum working pressure.
Style TSHD - 6000 PSIG Rated w/ 316L SS End Fittings
Specify overall length – change xx” in part number to desired overall length.
“Safety Pigtail” Style TSHD, with SS Armor Casing
Specify overall length – change xx” in part number to desired overall length.
Options (fitting part number change in parenthesis):Stainless steel street elbow installed and pressure tested (SS5502-04-04)Stainless steel CGA Nut and Nipple installed and pressure tested
Style TSHD flexible pigtails have a minimum burst pressure rating 4 times the maximum working pressure. The stainless steel armor casing allows free movement of the hose and protects the hose from damage. This casing also acts as a bend restrictor to prevent kinking near the connections and to enhance whip protection in the event of a cylinder falling or other similar incidents.
1/4” 0.495” 0.69” 4 3.0” 6000 PSIG 24,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
4TSHD-244-244-xx” 1/4” Female NPT Inert
4TSHD-244-214-xx” 1/4” Female NPT x 1/4” Male NPT Inert
4TSHD-214-214-xx” 1/4” Male NPT Inert
HOSE PART # ENDS SERVICE
4TSHD-244-244-xx”-A 1/4” Female NPT Inert
4TSHD-244-214-xx”-A 1/4” Female NPT x 1/4” Male NPT Inert
4TSHD-214-214-xx”-A 1/4” Male NPT Inert
HOSE PART # ENDS SERVICE
Portland, OR 1-800-234-25666your single-source supplier
Specialty GasAll-Metallic Style Pigtails
Style UFHP22 (3850 - PSIG) Style SF4500 (4500 - PSIG)
Style UFHP22 – 3850 PSIG Rated w/ 316L Stainless Steel End Fittings
1) Specify overall length – change xx” in part number to desired overall length.2) Add -A after part number for stainless steel safety armor.3) Add -CCB after part number for O2 cleaned assemblies - max length not to exceed 600”.
Style SF4500 – 4500 PSIG Rated w/ 316L Stainless Steel End Fittings
1) Specify overall length – change xx” in part number to desired overall length.2) Add -A after part number for stainless steel safety armor.3) Add -CCB after part number for O2 cleaned assemblies - max length not to
exceed 600”.
Options (fitting part number change in parenthesis):316L stainless steel VCR and VCO ends are available. Contact Unisource for prices.
Helium leak testing available. Call for information.
Style UFHP22 and SF4500 “all-metallic” specialty gas pigtails are designed for small molecule gases (helium & hydrogen) and feature “zero permeation”. These hoses are constructed utilizing a corrugated 316L stainless steel inner core, reinforced with two
layers of stainless steel braid and features either a 316L ANPT male or female thread to ensure a tight connection. An optional “Safety Armor” is available for added protection. Each hose is marked with an aluminum belly band noting the working pressure and date manufactured. All assemblies are pressure tested to 1-1/2 times the working pressure and have a minimum burst pressure rating 4 times the maximum working pressure.
Caution: All metal hoses are susceptible to cracking if subjected to high velocity flow rates. See page 14 for information on velocity rate calculation.!
1/4” 0.64” 0.81” 2 4.0” 3850 PSIG 15,400 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
UFHP22-025-24H-24H-xx” 1/4” Female NPT both ends
UFHP22-025-21-24H-xx” 1/4” Male x Female NPT
UFHP22-025-21-21-xx” 1/4” Male NPT both ends
HOSE PART # ENDS
1/4” 0.64” 0.79” 2 12.0” 4500 PSIG 18,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
SF4500-025-24H-24H-xx” 1/4” Female NPT both ends
SF4500-025-21-24H-xx” 1/4” Male x Female NPT
SF4500-025-21-21-xx” 1/4” Male NPT both ends
HOSE PART # ENDS
7Portland, OR 1-800-234-2566your single-source supplier
Special Application Gas PigtailsStyle SF82 Monel® Hybrid
Style SF82 Monel® - 3000 PSIG Rated Monel® or SS Ends
1) Specify overall length – change xx” in part number to desired overall length.2) Add -A after part number for stainless steel safety armor.3) Add -CCB after part number for O2 cleaned assemblies - max lengthnot to exceed 600”.
Style SF82 is an extremely flexible and durable Monel Hybrid, all-metallic, all welded construction that provides a “zero permeation” pigtail. This pigtail features an all welded corrugated Monel inner core with Monel end fittings for applications ranging from oxygen service to corrosive gas service. Two stainless steel braids are used instead of Monel braids to provide higher pressure resistance. The optional flexible stainless steel armor can be added for additional safety. Each hose is branded with the pressure rating and date of manufacture.
Caution: All metal hoses are susceptible to cracking if subjected to high velocity flow rates. See page 14 for information on velocity rate calculation.!
SF82-025-84H-84H-xx” 1/4” Female NPT both ends
SF82-025-81-84H-xx” 1/4” Male x Female NPT
SF82-025-81-81-xx” 1/4” Male NPT both ends
HOSE PART # ENDS
1/4” 0.65” 0.79” 2 10.0” 3000 PSIG 12,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
Portland, OR 1-800-234-25668your single-source supplier
Tube Trailer HoseStyle TSHP (PTFE Core)
Style SF32HP (Stainless Steel )
Hoses for tube trailer applications must offer the features of high working pressures, durability, and ease of flexing. Unisource Style TSHP (black, static-conducting, low effusion, PTFE core) and SF32HP (all-stainless steel welded design) combine all of these qualities. Designed to transfer gas such as helium and hydrogen from special high-pressure delivery trailers, Unisource “Tube Trailer Hoses” have crimped or welded 316L stainless steel end fittings and the option of adding our anti-whip, anti-kink “Safety Armor.” “Safety Armor” protects the exterior of the hose from abuse in operation for extended service life and to enhance whip protection in the event of accidental hose breakage. All assemblies are branded with manufacturer, pressure rating, and month/year of manufacture.
Style TSHP (Low Effusion PTFE Core) - 5000 PSIG Rated,316L Stainless Steel End Fittings
“Safety Tube Trailer Hose” with SS Armor Casing.
1) Specify overall length – change xx” in part number to desired overall length.2) Add -CCB after part number for O2 cleaned assemblies - max length not to exceed 420”.
Style SF32HP (Stainless Steel) - 3700 PSIG Rated, 316L Stainless Steel End Fittings
All Stainless Steel Tube Trailer Hose with Armor Casing.
1) Specify overall length – change xx” in part number to desired overall length.2) Add -CCB after part number for O2 cleaned assemblies - max length not to exceed 600”.
1/2” 0.615” 0.86” 2 3.0” 5000 PSIG 20,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
8TSHP-24-24-xx”-A 1/2” Female NPT *
8TSHP-21-21-xx”-A 1/2” Male NPT*
8TSHP-21-24-xx”-A 1/2” Male x Female NPT*
HOSE PART # ENDS
1/2” 0.94” 1.25” 2 5.7” 3700 PSIG 14,800 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
SF32HP-050-24H-24H-xx”-A 1/2” Female NPT both ends
SF32HP-050-21-24H-xx”-A 1/2” Male x Female NPT
SF32HP-050-21-21-xx”-A 1/2” Male NPT both ends
HOSE PART # ENDS
9Portland, OR 1-800-234-2566your single-source supplier
Specialty ApplicationTube Trailer Hose Style SF82 Monel - 2500 PSIG
Style SF82 is an all-Monel hose dseigned for corrosive gas or oxygen applications. Like our SF32HP, Style SF82 is a welded, zero-permeation hose assembly. Rated for 2500 PSIG MAWP. Monel corregated hose, braid and end fittings. Optional armor casing is stainless steel. Each assembly is tested 1-1/2 times the MAWP. Branded with MAWP and month/year of manufacture.
Monel Tube Trailer Hose Style SF82 - 2500 PSIG
1) Specify overall length – change xx” in part number to desired overall length.2) Add -CCB after part number for O2 cleaned assemblies - max length not to exceed 600”.
Monel Tube Trailer Hose with Armor Casing
1/2” 0.81” 1.25” 2 7.0” 2500 PSIG 10,000 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
HOSE PART # ENDS
SF82-050-84H-84H-xx”-A Monel 1/2” Female NPT both ends
Portland, OR 1-800-234-256610your single-source supplier
Liquid Cylinder HoseUF21 “Ultraflex”Cryogenic
CGA 295
3/8” MNPT x CGA 295
1/2” MNPT x CGA 295
CGA 295 x CGA 295 elbow
ENDS
UF21-050-25-25-xx”
UF21-050-21(038)-25-xx”
UF21-050-21-25-xx”
UF21-050-25-25(90)-xx”
PART #
UF21-050-25-25-xx”-A
UF21-050-21(038)-25-xx”-A
UF21-050-21-25-xx”-A
UF21-050-25-25(90)-xx”-A
PART #
CGA 440
3/8” MNPT x CGA 440
1/2” MNPT x CGA 440
CGA 440 x CGA 440 elbow
ENDS
UF21-050-25(063)-25(063)-xx”
UF21-050-21(038)-25(063)-xx”
UF21-050-21-25(063)-xx”UF21-050-25-063-25(90)-063-xx”-CCB
PART #
UF21-050-25(063)-25(063)-xx”-A
UF21-050-21(038)-25-xx”-A
UF21-050-21-25-xx”-AUF21-050-25-063-25(90)-xx”-A-CCB
PART #
Part # Service ACCESSORIESSSL-CR90-8 Inert S/S Elbow, Flare nut x male flare thread, CGA 295SSL-CR90-10 Oxygen S/S Elbow, Flare nut x male flare thread, CGA 440J-574 Inert Phase Separator, Bronze, 3/8” FNPT x 3” OALTHS-NAS Inert S/S Quick-Fill, T-Handle Spin Adapter, Straight Style, CGA 295THS-NAS-90 Inert S/S Quick-Fill, T-Handle Spin Adapter, 90 Degree Style, CGA 295 THS-OS Oxygen S/S Quick-Fill, T-Handle Spin Adapter, Straight Style, CGA 440 THS-OS-90 Oxygen S/S Quick-Fill, T-Handle Spin Adapter, 90 Degree Style, CGA 440 Other adapters available. Call for pricing.
Inert Service
Specify overall length – change xx” in part number to desired overall length.
Style UF21 “ultraflex” liquid cylinder hoses feature an extremely flexible stainless steel inner core that is very durable and well suited for cryogenic transfer applications. Ultraflex hose is ISO 10380 certified, and comes standard with machined flare ends and stainless steel hex nuts. Each hose is permanently stamped with the MAWP pressure rating and date of manufacture.
Oxygen Service
Other fittings are available. Contact Unisource for part number and other information.
Specify overall length – change xx” in part number to desired overall length.Other fittings are available. Contact Unisource for part number and other information.
Oxygen hoses are cleaned, capped, bagged, and certified clean for oxygen service per CGA G4.1 - max length not to exceed 600”.
WITHOUT ARMOR CASING WITH ARMOR CASING
WITHOUT ARMOR CASING WITH ARMOR CASING
1/2” 0.79” 0.94” 1 4.9” 1160 PSIG 4640 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
11Portland, OR 1-800-234-2566your single-source supplier
Truck & Bulk Loading HoseSF21 “Superflex” Cryogenic
Standard lengths are 14 feet. For other lengths, specify overall length – change “xx” in part number to desired overall length - max length not to exceed 300”.
For 3000# full threaded coupler ends contact Unisource.
Choose from the following CGA bronze trailer fittings to be added to the above hose assemblies. CGA fittings can be threaded on or silver brazed. Aluminum tail plugs available.
Style SF-21 “Superflex” is a durable all-stainless steel hose for the bulk transfer of cryogenic liquid. Each assembly is constructed with 321 stainless steel corrugated inner core, a 304 stainless steel single braid, and 304 stainless steel female NPT threaded coupling each end, to accommodate an appropriate CGA fitting. An 18 inch long 304 stainless steel armor bend restrictor is welded to each end. All assemblies can have CGA fittings threaded or silver brazed to each end for an extra charge. Assemblies are cleaned, capped, and bagged for oxygen service.
Style SF21 - 321 S/S Hose with 304 S/S Braid, 304 Female Threaded Ends
SF21-150-24-24-A18-xx” (1-1/2” Hose) 1-1/2” Female NPT both ends
SF21-200-24-24-A18-xx” (2” Hose) 2” Female NPT both ends
HOSE PART # ENDS
1-1/2” Nitrogen NI-150 590-000-15 ASK - 40 - 0003 590 - 001 - 15
2” Nitrogen NI-250 590-002-25 ASK - 40 - 0050 540 - 006 - 25
1-1/2” Argon AR-150 580-002-15 ASK - 40 - 0003 580 - 006 - 15
2” Argon AR-250 580-000-25 ASK - 40 - 0050 580 - 001 - 25
1-1/2” Oxygen OX-150 540-000-15 ASK - 40 - 0003 540 - 001 - 15
2” Oxygen OX-200 540-010-20 ASK - 40 - 0020 540 - 013 - 20
FITTING SIZE SERVICE CGA DESIGNATION
PART # NUT FILLING SLEEVE
PART # TAIL PLUG
1-1/2” 2.10” 2.50” 1 11.0” 472 PSIG 2120 PSIG
2” 2.74” 3.19” 1 13.0” 516 PSIG 2140 PSIG
NOMINAL HOSE I.D.
O.D. WITHOUT ARMOR
O.D. WITH ARMOR NO. OF BRAIDS DYNAMIC
BEND RADIUSWORKING PRESURE
BURST PRESSURE
Other sizes also available.
Portland, OR 1-800-234-256612your single-source supplier
CO2 Bulk Liquid Transfer Rubber FDA Grade Hose
Style 2520FDA
Style 2520FDA hose is designed to handle the rigorous demands associated with the bulk transfer of CO2 liquid and vapor. Style 2520FDA hose outperforms all others. Each hose is constructed with a low temperature, smooth inner core (no more trapped CO2). Unlike rubber hydraulic hose that are constructed with carbon steel braids, Style 2520FDA hose is reinforced with stainless steel braids to resist carbonic acid corrosion. The rugged “pin pricked” outer casing will not bubble and is resistant to abrasion, ozone, and weather. Style 2520FDA hose is rated at 450 psig, and will operate from -65 degrees to +180 degrees F. A heavy duty brass FNPT fitting is attached to each hose end by use of a high temperature plated steel crimp collar that interlocks the two components. Hose sets (liquid transfer and vapor) are available.
Style 2520FDA - CO2 Transfer/Vapor Hose
All CGA ends utilize female NPT on hose with brass CGA adaptor, hex nut. Thread on style.
2520FDA-100 1” 1.58” 450 2250 0.83
2520FDA-150 1-1/2” 2.08” 450 2250 1.19
2520FDA-200 2” 2.60” 450 2250 1.90
SERIES # I.D. ( IN.)
O.D. (IN.)
MAX WPPSIG
MIN BURSTPSIG WEIGHT PER FOOT
A-2520FDA-100-14-14-240.0” Brass 1” FNPT 20 Feet
A-2520FDA-100-CGA-CGA-240.0” 1” CGA E/E 20 Feet
A-2520FDA-100-14-14(150)-240.0” 1” x 1-1/2” FNPT 20 Feet
A-2520FDA-100-CGA-CGA(150)-240.0” 1” x 1-1/2” CGA 20 Feet
HOSE PART # ENDS SERVICE
A-2520FDA-200-14-14-240.0” Brass 2” FNPT 20 Feet
A-2520FDA-200-CGA-CGA-240.0” 2” CGA E/E 20 Feet
HOSE PART # ENDS SERVICE
A-2520FDA-150-14-14-240.0” Brass 1-1/2” FNPT 20 Feet
A-2520FDA-150-14-14-240.0” w/CGA 1-1/2” CGA E/E 20 Feet
A-2520FDA-150-14-14(200)-240.0” 1-1/2” x 2” FNPT 20 Feet
A-2520FDA-150-CGA-CGA(200)-240.0” 1-1/2” x 2” CGA 20 Feet
HOSE PART # ENDS SERVICE
13Portland, OR 1-800-234-2566your single-source supplier
Beverage CO2 Delivery and Cylinder HoseStyle 4770
Style 4770 thermoplastic hose is specially designed for the transfer of liquid and gaseous carbon dioxide (CO2) for beverage applications. It is commonly used on squirt truck delivery reels as well as flexible lines from the restaurant wall-box to liquid cylinders. Series 4770 hose is specially formulated to perform well in temperatures as low as -40°F, and the proprietary core tube is plasticizer-free and FDA compliant. Our unique bonding process guarantees excellent kink resistance, and the proprietary “Tuff-Skin” cover provides for superior handling and abrasion resistance.
Note: To order bulk hose, simply specify 4770-08 and the amount of feet.
Style 4770 - CO2 Transfer Hose (Rated -40°F to 150° F)
Assemblies - Without Vent Tubing
Note: Assemblies with vent tubing also available.
Part # ACCESSORIES
D100S FlexCrimp Portable Crimper
D100-1 ValPower Hand Pump
D100-2 ValPower Pneumatic Pump
PF-100 Hose Swager
4599-FP006 Pusher for 1/2” Hose
4540-30800 Die for 1/2” Hose
B78C12-12F Fill Gun Quick Connect - Wing Nut Style
B78N12-12FWF Wall Box Nipple w/ 6 Hole Flange
9SS 8MP50xFP50-SS-B7657 90 Degree Stainless Live Swivel from Connection to Reel
N718-25-26-15.5G Hose Reel w/ 1/2” Super Swivel Full-Flow, Low Temp
4770-08 NONE Up to 500 ft reels
10FJ-8RT 1/2” Hose x 5/8” FJIC 20 per box
HOSE PART # ENDS SERVICE
A-4770-08-RT-10FJ-10FJ-60.0” Plated CS 5/8” FJIC E/E 5 feet
A-4770-08-RT-10FJ-10FJ-120.0” Plated CS 5/8” FJIC E/E 10 feet
A-4770-08-RT-10FJ-10FJ-180.0” Plated CS 5/8” FJIC E/E 15 feet
A-4770-08-RT-10FJ-10FJ-300.0” Plated CS 5/8” FJIC E/E 25 feet
A-4770-08-RT-10FJ-10FJ-360.0” Plated CS 5/8” FJIC E/E 30 feet
A-4770-08-RT-10FJ-10FJ-600.0” Plated CS 5/8” FJIC E/E 50 feet
A-4770-08-RT-10FJ-10FJ-900.0” Plated CS 5/8” FJIC E/E 75 feet
A-4770-08-RT-10FJ-10FJ-1200.0” Plated CS 5/8” FJIC E/E 100 feet
HOSE PART # ENDS SERVICE
4770-08 1/2” 0.81” 4.0” 2000 8000 0.148
SERIES I.D.(IN.)
O.D.(IN.)
BEND RADIUS (IN.)
MAX WPPSIG
MIN BURSTPSIG WEIGHT/FT
Portland, OR 1-800-234-256614your single-source supplier
CGA Nuts & NipplesBrass & Stainless Steel
CGA-280 284 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-280 283 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-296 29-2 Nut 3000 PSI Brass, .803-14 UNS-2A, RH Male
CGA-296 29-3 Nipple 3000 PSI Brass, 1/4” NPT, 3” Long
CGA-296 29-3CV CV Nipple 3000 PSI Brass, 1/4” NPT, 3” Long w/ Check Valve
SERVICE PART # TYPE PRESSURES TO DESCRIPTION
CGA-300 16-2 Nut 3000 PSI Brass, .830-14 NGO, RH Female
CGA-300 16-3 Nipple 3000 PSI Brass, 1/4” NPT, 2” Long
CGA-300 83-CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-320 CO-2 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-320 CO-3 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-320 CO-4CV 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-346 14-2 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-346 14-3 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-346 14-3CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-350 82 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-350 83 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-350 83-CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-500 500-2 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-500 15-8 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-500 15-8CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-510 15-2 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-510 15-8 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-510 15-8CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-540 62 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-540 63 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-540 63-CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-580 92 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-580 15-8 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-580 15-8CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
CGA-590 93 Nut 3000 PSI Brass, .750-14 NGO, RH Fem
CGA-590 15-8 Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long
CGA-590 15-8CV CV Nipple 3000 PSI Brass, 1/4” NPT, 2-1/2” Long w/ Check Valve
For CGA-296 brass hand-tight, specify 6296 nut and NP-123W soft-tip nipple.
For CGA-300 hand-tight, specify 616-2 brass nut, or 616-2P plastic nut and 616-3 soft-tip nipple.
For CGA-320 hand-tight, specify 6-CO-2 brass nut, or 6-CO-2P plastic nut and 6-CO-4 soft-tip nipple.
For CGA-346 hand-tight, specify 614-2 brass nut, or 614-2P plastic nut and 614-5 soft-tip nipple.
For CGA-350 hand-tight, specify 682 brass nut and 683 soft-tip nipple.
For CGA-350 hand-tight, specify 682 brass nut and 683 soft-tip nipple.
For CGA-510 hand-tight, specify 615-2 brass nut, or 615-P plastic nut and 615-3T soft-tip nipple.
For CGA-540 hand-tight, specify 662 brass nut, or 662P plastic nut and 663 soft-tip nipple.
For CGA-580 hand-tight, specify 692 brass nut, or 692P plastic nut and 615-3T soft-tip nipple.
For CGA-590 hand-tight, specify 693 brass nut, and 615-3T soft-tip nipple.
15Portland, OR 1-800-234-2566your single-source supplier
High-Pressure Pigtail Selection Guide
COMPATIBILITy: 5 – Excellent • 4 – Very Good • 3 – Good • 2 – Acceptable • N – Not Acceptable
Tube Trailer Hose Selection Guide
1 – Gases that are flammable or poisonous should be filled, stored, transfilled, or used in a well ventilated area.
2 – Always use Unisource BE-4-3HP brass extension piece to absorb the heat experienced in adiabatic compression.
3 – Cryogenic liquids should never be trapped between two points without appropriate pressure relief.
Corrugated Metal Hose Velocity Calculation
LIMIT IF GAS
LIMIT IF LIQUID
Velocity = Flow Rate (volume per time) / cross-sectional area
Max Flow Velocity recommended for Unisource corrugated hose:
If fluid is a gas, max = 150 ft / sec
If fluid is a liquid, max = 75 ft / sec
1Acetylene 510 4 2 5 5 3 3 3 2
Air 346 5 5 5 3 3 3 3 2
Argon 580 5 5 5 3 3 3 3 21Arsine 660 N N N N n N 3 N
Carbon Dioxide 320 5 5 4 3 3 3 3 N1Carbon Monoxide 350 4 3 4 4 5 5 3 N
1Chlorine 660 N N N N N N 4 N1Flourine 679 N N N N N N 4 N1Freon 12 660 5 5 5 4 5 5 5 N
Helium 580 4 4 4 3 5 5 4 21Hydrogen 350 3 4 4 3 4 4 3 N1Methane 350 5 5 5 4 5 5 5 N
1Natural Gas 350 3 3 3 5 5 5 3 N
Nitrogen 580 5 5 5 5 3 3 3 2
Nitrous Oxide 326 5 5 5 3 3 3 3 N
Oxygen 540 52 N 2 3 3 3 4 N
UNISOURCE HOSE STYLE TSC/TSCZ TSZEL/TSCZELZ TSCB TSHD UFHP22 SF4500 SF82 4700
WORKING PRESSURE (MAWP) 3000/3600 PSIG 3000/3600 PSIG 3000 PSIG 6000 PSIG 3700 PSIG 4500 PSIG 4250 PSIG 3000 PSIG
CORE OR LINER PTFE ETFE BLACK PTFE PTFE 316L S/S 316L S/S MONEL NYLON
GAS CGA CONNECTION
Air 4 3 3
Argon 4 3 3
Carbon Dioxide 4 5 3
Helium 3 5 51Hydrogen 3 5 3
1Natural Gas 4 3 3
Nitrogen 4 3 3
Nitrous Oxide 3 3 3
Oxygen 3 3 N
UNISOURCE HOSE STYLE TSHP SF32HP 3707
WORKING PRESSURE (MAWP) 5000 PSIG 3700 PSIG 3000 PSIG
CORE OR LINER PTFE 316L S/S NYLON
GAS
1/4” 0.31 0.0005 283.00 149.98
1/2” 0.43 0.0010 544.50 149.98
3/4” 0.56 0.0017 923.50 149.98
1” 1.06 0.0061 3308.00 149.94
1/4” 0.31 0.0005 141.50 74.99
1/2” 0.43 0.0010 272.25 74.99
3/4” 0.56 0.0017 461.75 74.99
1” 1.06 0.0061 1654.00 74.97
HOSE SIZE ID-INCHES (INPUT)
X-SECT AREA:SQ FT
(CALCULATED)
FLOW RATE: CFH
(MAX)
VELOCITY: FT/SEC(CALCULATED)
Portland, OR 1-800-234-256616your single-source supplier
Notes
17Portland, OR 1-800-234-2566your single-source supplier
Notes
8040 NE 33rd Drive • Portland, Oregon 97211503-281-3781 • 1-800-234-2566Fax: 503-287-4818Web: www.unisource-mfg.comEmail: [email protected]
your single-source supplier
Represented by:
CGC-0114