ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
NAMUR - the User‘s VoiceUser requirements and NAMUR recommendations for the interoperability
across the manufacturing enterprise in the context of international standards
Dr. Hasso DrathenGeneral Manager of NAMUR andHead of Intellectual Property Services of Process Management Technology, Bayer Technology Services
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Division 1 Engineering and Construction
Division 2 Systems and Solutions
Division 3 Field Devices
Division 4 Maintenance and Services
NAMUR
Board of ManagementOfficeGeneral
Assembly
-??- VKEAnlage 1
NAMUR
Division 5 Explosion Protection Services
Division 6 Project Group List of Characteristics
PROLIST
European User Association of Measurement, Automation and Process Control Technology
in Chemical, Petrochemical and Pharmaceutical Industries
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Well known NAMUR RecommendationsNE01 Noncontacting Initiators and Accompanying Switching Amplifiers -
IEC 60947-5-6 "Low-voltage switch gear and control gear: Part 5-6: Control Circuit Devices and Switching Elements - Direct Current Interface for Proximity Sensors and Switching Amplifiers (NAMUR)”
NE06 Electrical Standard Signals and Device Technology IEC 60381 “Analogue signals for process control systems: Part 1 Direct current signals”
NE12 Explosion protection of analyser housesIEC 61285: „Industrial-process control - safety of analyzer houses“
NE31 Safety of process plants using process control systems and ISA S84 Programmable Electronic Systems for Use in Safety ApplicationsIEC 61511 “Functional Safety - Safety Instrumented Systems for the Process Industry Sector”
NE33 Requirements to be met by systems for recipe-based operations and ISA S88 Batch Control SystemsIEC 61512 “Batch Control”
NE58 Execution of process control projects subject to validation, and NE68, NE71, NE72 are part ofGAMP - Good Automated Manufacturing Practice - Part 2
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Requirements and Offers
tomorrow
today
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
The Challenges for the Interoperability of Device Data
Data sheet with user requirements to instrumentation
and systems
basic engineering
data
supply data procurement
data
device datafrom the vendor
detailengineering
dataconstruction
data
materialmanagement
data
plantmaintenance
data
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Data Flow and Interfaces of the Planning Process in PCE
Purchasing department
PLANNING PROCESS
DOKUMENTATION:
Data fora PCE-loop
Requirem. & description
Equipment data
Loops Hook-ups
Maintenance
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Data Flow and Interfaces of the Planning Process in PCE
Purchasing department
PLANNING PROCESS
DOKUMENTATION:
Data fora PCE-loop
Requirem. & description
Equipment data
Loops Hook-ups
Maintenance - device data are used
See NAMUR NE 55or ISA S20
Detail engineering Updates, Traceability
Vendor
Plant maintenance,Material management
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Using the Lists of Characteristics (LOC)
Manufacturer Customer
Planningsystem
Mainte-nancesystem
Internet
Salessystem
Purcha-sing
system
inquiry inquiry
data
further orders
equip-mentdata
Deve-lopmentsystem
equip-
ment
data
offer
order decision
Aftersales
serviceequipment
data
shipping equipmentdata as build
updates
shipping
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
General Data Modelof the Device Specifications in the NE100
NE 100 Version 1.0 contains device specifications for 41 types of measuring equipment.
Each device specification consists of two Lists of Characteristics (LOC):- the LOC requirements and
- the LOC device
Specification form (device specification)
Data regarding location (LOC requirements):
• Design data (e.g. nominal size of connection flange)
• Characteristics of medium (e.g. viscosity)• Environmental conditions
(e.g. minimum ambient temperature)• Quality and safety requirements
(e.g. Ex zone)
Data regarding equipment (LOC device):
• Design characteristics (e.g. material)• Electric characteristics (e.g. load)• Certificates (e.g. test certificate)• Measuring accuracy (e.g. hysteresis)• CAE data (e.g. connecting points)• etc.
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
PROLIST Working GroupsWorking groups
1.Data model
2.LV Switchgear
3.Sensors
4.Remote Operated Valves & Fittings
5.Signal Adjustment
6.Electric Drives
7.CAE Applications
8.Fieldbus
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
NE 100for International Standardisation
• The data model used in NE 100 corresponds
to the most important standards in this area: IEC 61360 and ISO 13584.
• There exists a standard that describes how to arrange a technical
description of a measuring device. This is the IEC/PAS 61987-1.
• The device descriptions of NE 100 using the LOCs will be arranged
according to IEC/PAS 61987-1, beginning with version 1.1.
• The device descriptions developed for other fields,
as for remote-operated fittings, signal adjustment or electric drives
will be proposed for incorporation into IEC standards.
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Main Task of the Project Group „Lists of Characteristics“
• Development and maintenance of the device specifications (LOCs)
• Immediate availability of the lists of characteristics
(by means both of the internal data base and NE 100)
to the members of the project group (manufacturers and customers)
for direct use
• Internationalisation of the device specifications by means of IEC standard
• Consideration of possibilities how to use the characteristics
in order to optimise internal and external company processes
ARC Conference OrlandoJanuary 2004
Hasso Drathenpage [email protected]
Join the NAMUR Activities
www.NAMUR.de