8/22/2019 GWC Valve International - needle and gauge valves
1/12
GWC Valve International
Proven
tec
hnologyforindiv
idualvalvesolut
ionsworldwide
needle valves
gauge valves
siZe range: 1/4 - 1
catalog number ngv-1001
8/22/2019 GWC Valve International - needle and gauge valves
2/12
8/22/2019 GWC Valve International - needle and gauge valves
3/12
table of contents
Ordering Guide 4
Needle Valves 5
Gauge Valves 7
Pressure/Temperature Charts 8
Terms and Conditions o Sale 9
Return Goods Policy and Warranty 10
St a n d a r d P r o d u c t S
8/22/2019 GWC Valve International - needle and gauge valves
4/12
ordering guide
exp: 1/2 sw601-3-lc-J2-l
1/2 6,000 PSI NEEDLE VALVE, FNPT, CF8M BODY x 316SS TRIM, DELRIN SEAT, VITON B
STEM SEAL, NACE, LEVER OP.
W60 1S 3 LC J
2. 3.1. 4. 5. 6. 7.
2
1. MODEL
S - NEELDE VALVE SG - GAUGE VALVE
2. RATING
W60 - 6,000 WOG W100 - 10,000 WOG
3. END CONNECTION
1 - SCREWED
4 - SCREWED FEMALE x SCREWED MALE
5 - 1 SCREWED MALE x 3 SCREWED FEMALE
X - SPECIAL
4. TYPE
3 - STANDARD
5. MATERIAL (BODY + TRIM)
LC - CF8M + 316
LF - F316 + 316
SF - 1017 + 316
X - SPECIAL
6. MATERIAL (SEAT)
J - DELRIN M - METAL X - SPECIAL
8. OPERATOR
L - HANDWHEEL OPERATOR
9. SPECIAL REQUIREMENTS
S - SUPPLY COMPLETE INFORMATION
7. MATERIAL (O-RING SEAL)
1 - HNBR 2 - VITON B X - SPECIAL
8.
L
8/22/2019 GWC Valve International - needle and gauge valves
5/12
Model SW601
needle valves
Model SW101
**NACE MR-01-75 Certifed**(For CF8M body only)
Construction: Heavy duty body, precision threaded bonnet with bonnet locking pin, metal
to metal back seat, O-ring stem seal, Delrin replaceable sot seat.
End to End: GWC Standard Female x Female
End Threads: ASME B1.20.1
Rating: 6000 WOG
6000 WoG
Valve Size1/48mm
1/215mm
3/420mm
125mm
Bore Size 0.25 0.25 0.38 0.38
End to End 2.88 2.88 4.25 4.25
Centerline to End 1.44 1.44 2.13 2.13
Height at Close Pos. 3.63 3.63 4.96 4.96
Open Travel 0.38 0.38 0.35 0.35
Approx. Weight (lbs.) 1.36 1.19 2.39 2.38
Dimensions in inchesStandard MaterialS
Figure Number SSW601-3-SF-J1-L SW601-3-LC-J1-L
Body
Stem
Seat
O-Ring
1017
316SS
Delrin
HNBR
A351 CF8M
316SS
Delrin
HNBR
**NACE MR-01-75 Certifed**(For CF8M body only)
Construction: Heavy duty body, precision threaded bonnet with bonnet locking pin, metal
to metal back seat, O-ring stem seal, metal to metal stem seat. End to End: GWC Standard Female x Female
End Threads: ASME B1.20.1
Rating: 10000 WOG
10000 WoG
Valve Size1/48mm
1/215mm
Bore Size 0.25 0.25
End to End 2.88 2.88
Centerline to End 1.44 1.44
Height at Close Pos. 3.63 3.63
Open Travel 0.38 0.38
Approx. Weight (lbs.) 1.36 1.19
Dimensions in inches
Standard MaterialS
Figure Number SW1001-3-SF-M1-L SW1001-3-LC-M1-L
Body
Stem
Seat
O-Ring
1017
316SS
Metal
HNBR
A351 CF8M
316SS
Metal
HNBR
8/22/2019 GWC Valve International - needle and gauge valves
6/12
needle valve
Model SW604
Model SW1004
**NACE MR-01-75 Certifed**(For CF8M body only)
Construction: Heavy duty body, precision threaded bonnet with bonnet locking pin, metal
to metal back seat, O-ring stem seal, Delrin replaceable sot seat.
End to End: GWC Standard Male x Female
End Threads: ASME B1.20.1
Rating: 6000 WOG
**NACE MR-01-75 Certifed**(For CF8M body only)
Construction: Heavy duty body, precision threaded bonnet with bonnet locking pin, metal
to metal back seat, O-ring stem seal, metal to metal stem seat. End to End: GWC Standard Male x Female
End Threads: ASME B1.20.1
Rating: 10000 WOG
10000 WoG
Valve Size 1/48mm 1/215mm
Bore Size 0.25 0.25
End to End 2.88 2.88
Centerline to End 1.44 1.44
Height at Close Pos. 3.63 3.63
Open Travel 0.38 0.38
Approx. Weight (lbs.) 1.36 1.19
Dimensions in inches
Standard MaterialS
Figure Number SW1004-3-SF-M1-L SW1004-3-LC-M1-L
Body
Stem
Seat
O-Ring
1017
316SS
Metal
HNBR
A351 CF8M
316SS
Metal
HNBR
Standard MaterialS
Figure Number SW604-3-SF-J1-L SW604-3-LC-J1-L
Body
Stem
SeatO-Ring
1017
316SS
DelrinHNBR
A351 CF8M
316SS
DelrinHNBR
6000 WoG
Valve Size1/48mm
1/215mm
3/420mm
125mm
Bore Size 0.25 0.25 0.44 0.44
End to End 3.25 3.38 5.50 5.50
Centerline to End 1.44 1.44 2.13 2.13
Height at Close Pos. 3.63 3.63 4.76 4.76
Open Travel 0.38 0.38 0.55 0.55
Approx. Weight (lbs.) 1.28 1.28 2.39 2.38
Dimensions in inches
8/22/2019 GWC Valve International - needle and gauge valves
7/12
**NACE MR-01-75 Certifed**(For Model SGW605-3-LC-N-L)
Construction: Oversized barstock body, precision threaded bonnet with bonnet locking pin,
metal to metal back seat, O-ring stem seal, Delrin replaceable sot seat.
End to End: GWC Standard
End Threads: ASME B1.20.1
Rating: 6000 WOG
**NACE MR-01-75 Certifed**(For Model SGW1005-3-LC-M-L)
Construction: Oversized barstock body, precision threaded bonnet with bonnet locking pin,
metal to metal back seat, O-ring stem seal, metal to metal stem seat. End to End: GWC Standard
End Threads: ASME B1.20.1
Rating: 10000 WOG
Model SGW605
gauge valve
Model SGW1005
Figure Number SGW605-3-SF-J1-L SGW605-3-LC-J1-L
Body
Stem
SeatO-Ring
1017
316SS
DelrinHNBR
A351 CF8M
316SS
DelrinHNBR
Standard MaterialS
Dimensions in inches
Valve Size1/2
15mm
Bore Size 0.25
End to End 5.63
Centerline to End 2.38
Height at Close Pos. 3.63
Open Travel 0.38
Approx. Weight (lbs.) 2.29
6000 WoG
Figure Number SGW1005-3-SF-M1-L SGW1005-3-LC-M1-L
Body
Stem
Seat
O-Ring
1017
316SS
Metal
HNBR
A351 CF8M
316SS
Metal
HNBR
Standard MaterialS
Valve Size 1/215mm
Bore Size 0.25
End to End 5.63
Centerline to End 2.38
Height at Close Pos. 3.63
Open Travel 0.38
Approx. Weight (lbs.) 2.29
10000 WoG
Dimensions in inches
8/22/2019 GWC Valve International - needle and gauge valves
8/12
The ollowing chart indicates the pressure and temperature ratings or commonly used seat and
seal material used in GWC 6,000 and 10,000 WOG needle and gauge valves. Other materials
are available upon request.
SW1001, SW1004, SGW1005
RATING 10000 PSI WOG
4500
4000
3500
2500
2000
1500
1000
500
50 150 2500 100 200 300
Temperature F
Pressure
psig
7500
7000
6500
6000
5500
5000
3000
10000
9500
9000
8500
8000
350 450400 500
METALSEAT
SW601, SW604, SGW605
RATING 6000 PSI WOG
3600
3200
2800
2000
1600
1200
800
400
50 150 2500 100 200 300
Temperature F
Pressure
psig
6000
5600
5200
4800
4400
4000
2400
DELRIN
Pressure/temPerature chart
Model SW needle ValVe & SGW GauGe ValVe
8/22/2019 GWC Valve International - needle and gauge valves
9/12
terms & conditions of sale
spThese terms and conditions apply to all GWC valve
products, and supersedes all previously published
terms and conditions.
Hereater, GWC Valve International, Inc. shall be
reerred to as GWC.
Special terms and conditions printed on a buyers
order will only apply insoar as they conorm to
the terms and conditions detailed on these pages.
Terms and conditions o an order that change or
modiy those on this sheet shall not be binding
on GWC.
appAll quotations, contracts, orders, or agreements
are subject to approval and/or acceptance by the
main oce o GWC.
We reserve the right to correct clerical orstenographic errors in quotations, orders, invoices,
and other contracts, agreements, or documents.
PPossession o price lists will not be accepted by
GWC as an obligation, or oer to sell the goods
listed therein to anyone.
All prices contained therein are subject to change
without notice, and supersede all previous lists.
All orders will be invoiced at prices in eect at the
time o shipment unless quoted in writing.
cOrders cannot be cancelled or specications be
changed without the consent o GWC, and then
only in terms indemniying GWC against loss.
QGoods quoted F.O.B. our service center are subject
to prior sale. Prices quoted are valid only or
the duration indicated in the quotation. Quoted
prices supersede all previous prices, quotations,
or contracts, and are subject to change without
notice.
cOrders placed with us cannot be cancelled without
our prior written consent. A cancellation charge will
be applicable as outlined in our quotation.
cAll claims or shortages, corrections, or deductions
must be made within 10 days ater receipt o
goods. Responsibility or goods lost or damaged
in transit rests with carrier, and claims should be
led with the carrier by the consignee. Delivery o
material to a common carrier shall be considered
delivery to the buyer, and shall be at the buyers
risk thereater.
d dWe assume no responsibility or delays in delivery,
or deaults resulting rom strikes, work stoppages,
res, foods, accidents, war, inability to obtain
materials, or any other cause unavoidable and
beyond our control.
txGWC quotations and/or contracts do not include
any municipal, state, or ederal sales, excise, use
occupational, or other taxes, and any such tax, ipaid by us will be charged to the purchaser.
c iCatalog illustrations are actual representations
o a certain size o each product line, but do not
necessarily represent all sizes in details. We
reserve the right to institute changes in materials,
designs, and speciications without notice in
keeping with our policy o continuing product
improvement.
c wCatalog weights represent average weights oproducts and are in no sense guaranteed.
rSee Return Goods Policy on next page.
sp oOrders or special goods must be in writing and
accompanied with detailed prints and/or sets
o specications, unless specications on the
orders are denite and complete. Orders will not
be entered with the actory unless this is adhered
to. Cancellation charges will be as outlined in our
quotations.
f tAll shipments are F.O.B. our service centers. See
current bulletin or reight allowance.
wSee warranty on reverse side
8/22/2019 GWC Valve International - needle and gauge valves
10/12
This policy supersedes all other policies or return goods.
I. Goods returned at customers request:
A. Material must be:
1. O our manuacture.
2. In clean, new and saleable condition. It must have been stored inside out o the weather.
3. Shipped rom one o our service centers within the 12 calendar months preceding the
request or return, and the return will not cause inventory to exceed maximum allowable
levels.
4. Personally inspected by a GWC representative prior to its return.
5. Special or non-standard items are non-returnable.
B. Return shipments must be prepaid.
C. Credit will be allowed at invoice price, less 25% handling cost, and less any reight paid by
GWC.
D. A Return Goods Card must be urnished by a GWC representative ater inspection o the material,
and must be returned with the shipment.
E. Shipments received without a Return Goods Authorization Card will be reused. Customer will
be responsible or any storage and/or return reight.
F. Material returned which is not o GWC manuacture, not in clean and saleable condition, or not
authorized or return will be returned to the customer reight collect.
II. Goods returned because o an error by GWC.
A. Material must be in a clean, new, saleable condition.
B. Return shipment should be made reight collect.
C. Full credit will be allowed.
D. Customer must receive Return Goods authorization prior to the return o the material. Return
Goods Authorization Card must accompany shipment. Shipments received without Return
Goods Authorization Card will be reused. Return Goods Authorization Card should be attached
to the packing list.
All requests to return material to GWC Valve International, Inc. must be submitted in writing to our National
Sales Manager or authorization.
GWC Valve International, Inc. warrants each product sold, i the products are o our manuacture, against
deects in material and workmanship under normal use and service or a period o one year ater date o
shipment.
This warranty is made to the buyer only, and does not extend to any other party. The obligation o GWC
Valve International, Inc. under this warranty is limited to: (a) replacement o any part or parts proven deective
in material or workmanship, (b) repair o the product F.O.B. the actory or service center, (c) reund o the
purchase price. In the case o product or parts not wholly o GWCs manuacture, GWCs liability under
this warranty shall be limited to the extent o GWCs recovery rom the manuacturer o such parts under its
warranty to GWC. This warranty does not extend to any claims or labor, consequential damages, down
time, or any other loss, damage, or expense o any kind arising out o the deect. We do not allow claims or
unauthorized repairs, labor, or material. We are not responsible or loss o use, personal injury, lost prots,
or any other damages whatsoever in connection with the warranties set orth.
No warranty shall apply to any product which has been modied or changed in design or unction ater leaving
GWCs acilities or which is misused or operated beyond its design capabilities, or used or other than its
intended purpose. Purchasers o GWC products should consult knowledgeable advisors in the selection o
product type and material o construction or their specic use. The buyer assumes all risk o this selection.
The buyer shall permit GWC or its authorized representative to inspect the product so that it may determine
its obligation. GWC shall be entitled to the return o the deective product or parts. Buyer must notiy
GWC promptly upon discover o any claimed deect.
No material may be returned without rst obtaining written permission rom GWC Valve International, Inc.
return goods Policy
warranty
8/22/2019 GWC Valve International - needle and gauge valves
11/12
8/22/2019 GWC Valve International - needle and gauge valves
12/12
catalog number ngv 1001
uSa HeadQuarterS
gwc v i, i.
4301 y w
bk, ca 93313
P: 1-661-834-1775
fx: 1-661-834-2072
e-m: s@gwc.
ww w.gw cv .