Non-Ferrous
Thick StockNon-Ferrous
1/4" MAX.
Copper, Brass,Aluminum
Long life & burr-free cuts in thick stock non-
ferrous stock
72T/80T
FULL KERF THIN KERF
-7° -5°Specialty Blades
Pages 44 to 45
––
LU89M010–
LU77M010
Thin StockNon-Ferrous
1/16" MAX.
Copper, Brass,Aluminum
Long life & burr-free cuts in thin non-
ferrous stock
100T
5°Specialty Blades
Pages 46
––
LU90M010––
Ripping
Ripping
3/4" to 2-3/4"
HardwoodsSoftwoods
Glue line rips with material 3/4" to 2-3/4"
18T/24T
20°Ripping Blades
Pages 19 to 21
LM72R010LM72M010LM71M010
LU87R010–
3/4" GlueLine Rip
1/8" to 1"
HardwoodsSoftwoods
Glue line rips with material
1/8" to 1"
30T
12°Ripping Blades
Pages 22 to 23
LM74R010–
LM74M010LM75R010
–
Ripping & Crosscutting Solid Surface
Solid Surface
1/4" to 1-5/8"
Solid Surface materials such as DuPont®,
Corian®
Ultra long life & swirl-free cuts in solid surface
materials
72T
0°Specialty Blades
Pages 48
LU95R010LU95M010
–––
Plastics
Plastics
1/4" to 1-5/8"
Acrylic,Polycarbonates,
Vinyl
Clean, burn-free cuts in plastics
80T
-3°Specialty Blades
Pages 47
––
LU94M010––
Chipboard
StackedChipboard
1-1/4" to 3-1/2"
ChipboardsPlywoods
Fast sizing of thick or stacked chipbaord up to
2-3/4"
40T/60T
LU81M010 LU82M010
13° 10°Chipboard Blades
Pages 38 to 39
–LU81M010LU82M010
––
Laminates / Melamine
Single-SidedLaminates /Melamine
1/4" to 1-5/8"
Laminates,Melamines,Chipboards,
Plywoods
Chip-free cuts in one-sided man-made materials
80T
10°Laminate Blades
Pages 41
LU98R010––––
Thick StockLaminates
1" to 2-3/4"
Laminates, Melamine,Chipboards,
Plywoods
High production blade delivers
chip-free edges
60T
-6°Laminate Blades
Pages 40
–LU92M010
––
Double-SidedLaminates /Melamine
1/4" to 1-5/8"
Laminates, Melamine,Chipboards,
Plywoods
Long life & chip-free cuts in double-sided
laminates, melamines & Plywoods
80T
-3°Laminate Blades
Pages 42 to 43
LU97R010LU97M010
–LU96R010
–
Crosscutting
Heavy-DutyCrosscut
1/2" to 2-3/4"
Hardwoods, Softwoods, Plywoods, Chipboards
Heavy duty crosscutting incabinetmaker's
shop
60T
LU73M010 LU88R010
10° 15°Crosscut Blades
Pages 32 to 33
––
LU73M010LU88R010
–
UltimateGeneralPurpose
Ripping3/8" to 1-1/2"
Crosscutting3/4" to 3-1/2"
Hardwoods, Softwoods,Veneered Plywoods
Glass-smooth crosscuts & rip cuts
40T
18°Premier GeneralPurpose BladesPages 24 to 25
P410––
P410T–
Combination
Ripping1/4" to 1-1/2"
Crosscutting3/4" to 3-1/2"
Hardwoods, Softwoods,Veneered Plywoods
Crosscutting & ripping
(emphasis on ripping)
50T
10°General Purpose
Combination BladesPages 28 to 29
LU84R011–
LU84M011LU83R010
–
GeneralPurpose
Ripping1/4" to 1"Crosscutting
3/4" to 3-1/2"
Hardwoods, Softwoods,Veneered Plywoods
Heavy duty crosscutting
& ripping
40T
13°General
Purpose BladesPages 26 to 27
––
LU72M010LU86R010
–
UltimateCut-Off
1/4" to 1-5/8"
Hardwoods, Softwoods,Veneered Plywoods
Ultimate glass smooth
crosscuts
80T
10°Crosscut Blades
Pages 34 to 35
LU85R010––
LU74R010–
Ultimate Plywood
& Melamine
1/4" to 1-5/8"
Hardwoods, Softwoods,Veneered Plywoods,
Double Sided Melamine
Flawless finish in wood & wood
composites
80T
2°Crosscut Blades
Pages 36 to 37
LU80R010–
LU80M010LU79R010
–
WOOD CUTTING WOOD & WOOD COMPOSITES SPECIALTY
Slide Miter /Radial Arm
1/2" to 2-3/4"
Hardwoods, Softwoods,Veneered Plywoods
Fast clean cuts with a slide miter saw or
radial arm saw
60T
-5°Crosscut BladesPages 31
–––
LU91R010LU91M010
Sliding Compound Miter& Radial Arm
HighATB
GUIDE TO CHOOSING A 10" SAW BLADE
Description
MaterialThickness
MaterialType
Application
ToothCount
ToothDesign
HookAngle
CatalogPages
For ThisCut
Use ThisBlade
Description
MaterialThickness
MaterialType
Application
ToothCount
ToothDesign
HookAngle
CatalogPages
For ThisCut
Use ThisBlade
TiCo™ Carbide Blend Scale
TiCo™ Carbide Blend Scale
Special carbide blend able to
withstand extreme impact when cutting
Super Hi-Density Tungsten Carbide – half the size of
standard micro-grain carbide (.4 microns vs .8) making this carbide the
hardest of all to withstand abrasive material and
create swirl-free finishes.
Specialty TiCo™ Super Hi-Density
Carbide Blend
Super Hi-Density Tungsten Carbide – half the size of
standard micro-grain carbide (.4 microns vs. .8) making this carbide the hardest of all to withstand abrasive material
and create swirl-free finishes.
Laminate, Melamine, & Chipboard TiCo™ Super Hi-Density
Carbide Blend
More Hi-Density Tungsten Carbide content making the carbide very hard – allowing the carbide to
maintain a sharp cutting edge in crosscut
applications.
Crosscutting TiCo™
Hi-Density Carbide Blend
A little less Cobalt content and more
Hi-Density Tungsten Carbide – allowing the
carbide to keep an edge longer in combination
applications.
Combination TiCo™
Hi-Density Carbide Blend
A perfect blend of Cobalt, Titanium and
Tungsten – both impact resistant and
hard carbide for general purpose
applications.
General Purpose TiCo™
Hi-Density Carbide Blend
High cobalt content–allowing
the carbide to withstand impact when cutting non-
ferrous metals
Non-Ferrous TiCo™
Hi-Density Carbide Blend
Increasing Hardness Carbide
Increasing Impact
StrengthMaintains a sharp cutting edge for fine finish, chip-free cuts, & long life
Medium Cobalt content–allowing
the carbide to withstand the
impact demands when ripping.
Ripping TiCo™
Hi-Density Carbide Blend
HIGH IMPACT EXTRA HARDCARBIDE SCALE HIGH IMPACT EXTRA HARDCARBIDESCALE