TEN MOST EXCELLENT
INVENTER IN TAIWANGOLD HAND
AWARD
Taiwan Machine Tools Industry Award 2007For Excellence in Research and Innovation
NC Lathe SECOND PRIZE
Taiwan Machine Tools Industry Award 2007For Excellence in Research and Innovation
Machining Center FIRST PRIZE
NATIONAL TECHNOLOGY
INNOVATION AWARD
2008
Awarded as A Proof of Excellence In Technical
HIGH PERFORMANCE AND PRECISIONCNC MACHINNG CENTER
HIGH PERFORMANCE AND PRECISIONCNC MACHINNG CENTER
GLG series
Feature 4H+1R
High Precision
High Rigidity
High Performance
High Speed
Reliable
Feature 4H+1R
High Precision
High Rigidity
High Performance
High Speed
Reliable
FANUCα6-12000rpm
FANUCα8-12000rpm
FANUCα12-10000rpm FANUCα15-10000rpm
FANUCα18-10000rpm FANUCα22-10000rpm FANUCα30-6000rpm
FANUCα12-10000rpmwith Gear-Box(ratio 1:4)
FANUCα15-10000rpmwith Gear-Box(ratio 1:4)
FANUCα18-10000rpmwith Gear-Box(ratio 1:4)
FANUCα22-10000rpmwith Gear-Box(ratio 1:4)
FANUCα30-6000rpmwith Gear-Box(ratio 1:4)
Cutting Capability
2020.03
GEON CHENG TECHNOLOGY CO., LTD.P.O.BOX 246 FENG YUAN TAICHUNG,TAIWANNo.78, Sanshe Rd., Shengang Dist. Taichung City 429, TaiwanTEL:+886-4-25316697 FAX:+886-4-25316657 E-mail: [email protected]
1 2
GM series
MODEL GM-1 (1470)
A: Head swing ±120 degreeB: Special inverse-T design bears axial & radial force to increase machine rigidity & head stock stability
and to last accuracy under high speed traveling.C: High resolution linear scale ensures optimal positioning and repeatability accuracy. D: Roller type linear guide ways provide rigidity for heavy cutting & high speed traverse.
GM-1(1470) base: 4 roller linear guide waysGM-2(2080) base: 6 roller linear guide ways
E: One piece casting base provides solid support to ensure ultimate dynamic accuracy F: Hand scraped contact surface of column & bed ensures precision assembly, strong structure & loading balance.
GM-2(2080)GM-1(1470)
B-axis-120º - 120º
TABLETable size (L*W) (mm/inch)X axis travel range (mm/inch)Y axis travel range (mm/inch)Z axis travel range (mm/inch)Max table load (kg/lbs)Spindle nose to table surface(Vertical) (mm/inch)Spindle center to table surface(Horizontal) (mm/inch)T slot (W*D*N mm)ROTARY TABLE
C axis D.D. Motor (FANUC / ETEL)
1500*675 / 59.1˝*25.6˝1100 / 43.3˝650 / 25.6˝720 / 28.3˝700 / 1560
30~750 / 1.2˝~29.5˝275~995 / 10.8˝~39.1˝
18*100*7
ø500 / ø19.7˝ø60 / ø2.4˝
22.20.001
550 / 1225α12(12Nm)/1FK7063(11Nm)/QSY155B(13Nm)
225 / 356
BT40 / BBT40 / HSK-A63750 / 29.5
15000FANUC BiI112S / ATE-170
5.5-7.5 / 21-2544-60 / 69-83
FANUC DiS250/250 (A06B-0495-B200) 200V Liquid cooling / ETEL TMB+0291-70
GM-2 (2080)
2000*800 / 78.7˝*31.5˝1900 / 74.8˝800 / 31.5˝770 / 30.3˝1200 / 2670
30~800 / 1.2˝~31.5˝275~1045 / 10.8˝~41.1˝
18*100*8
ø630 / ø24.8˝ø60 / ø2.4˝
40~500.001
900 / 2000α12(12Nm)/1FK7083(16Nm)/QSY155C(17.7Nm)
520 / 554
BT40 / BBT40 / HSK-A63850 / 33.4
15000FANUC BiI112L / ATE-180
15-18.5 / 27-3595-167 / 93-113
FANUC DiS500/250 (A06B-0495-B400) 200V Liquid cooling / ETEL TMB+0360-070
GM-3 (2080)
1700*900 / 66.9˝*35.4˝1600 / 62.9˝900 / 35.4˝850 / 33.4˝200 / 4400
2600*900 / 102.4˝*35.4˝2540 / 100˝900 / 35.4˝850 / 33.4˝2000 / 4400
30~880 / 1.2˝~34.6˝275~1125 / 10.8˝~44.3˝
18*100*8
ø800 / ø31.5˝ø60 / ø2.4˝
80~1000.001
1500 / 3300α12(12Nm)/1FK7083(16Nm)/QSY155C(17.7Nm)
840 / 1450
BT40 / BBT40 / HSK-A63900 / 35.4
15000FANUC BiI112L / ATE-180(OP)
15-18.5 / 27-3595-167 / 93-113
1 : 90±12016.70.001350
1 : 1±12040-500.001782
1 : 90±12016.70.001350
1 : 1±12040-500.001782
1 : 90±12016.70.001350
1 : 1±12040-500.001782
24/24/24 (945/945/945)10 (394)
α30(30Nm)/1FK7101(27Nm)/QSY190C(28Nm)
0.005 / 0.00024"
0.005 / 0.00028"
638050480
11000 / 244505.2*3 / 205*118.1
6.5*3*3.5 / 256*118.1*137.8
24/24/24 (945/945/945)10 (394)
α30(30Nm)/1FK7101(27Nm)/QSY190C(28Nm)
0.005 / 0.00024"
0.005 / 0.00028"
638050480
11000 / 244505.2*3 / 205*118.1
6.5*3*3.5 / 256*118.1*137.8
36/36/24 (1417/1417/945)10 (394)
α22(22Nm)/1FK7083(16Nm)/QSY155C(17.7Nm)
0.005 / 0.00024"
0.005 / 0.00028"
638040280
7200 / 160004*2.5 / 157.5*98.5
3*2.5*3 / 118.1*98.5*118.1
FANUC DiS1000/200 (A06B-0496-B300) 200V Liquid cooling / ETEL TMB+0530-070
Table diameter (mm/inch)Center bore diameter (mm/inch)Rotation speed (rpm)Minimum indexMax table load (kg/lbs)B axis rated torque (FANUC / SIEMENS / HEIDENHAIN)C axis rated torque (Nm) (FANUC / ETEL)Built-in spindleSpindle taperSpindle center to column (mm/inch)Spindle speed (rpm)Motor type (FANUC / ATE)Main motor (KW) (FANUC / ATE)Motor torque (Nm) (FANUC / ATE)SWING HEADDrive typeReduction ratioTilting range (degree)Max speed (rpm)Minimum unitWorking torque (Nm)AXIS SERVO MOTORSRapid feed rate (X/Y/Z) m/min (inch/min)Feed rate (X/Y/Z) m/min (inch/min)Rated torque for X,Y,Z axes (FANUC / SIEMENS / HEIDENHAIN)ACCURACYPositioning for XYZ axes (mm/inch)BC rotary (sec)-UndirectionalRepeatability for XYZ axes (mm/inch)BC rotary (sec)-BidirectionalOTHERAir requirement (kg/cm)VoltagePower requirement (KVA)Coolant tank capacity (L)Machine weight (kg/lbs)Floor space (L*W) m/inchPacking size (L*W*H) m/inch
A
B
C
D
E
F
Axial-Radial Bearing
Axial-Radial Bearing
Needle Bearing
Built-in Torque Motorfor Direct Drive(OP)
Built-in Torque Motor for Direct Drive(OP)
WORM GEAR / OP D/D MOTOR TMB+0290-150WORM GEAR / OP D/D MOTOR TMB+0290-150WORM GEAR / OP D/D MOTOR TMB+0290-150
*All specifications and designs are subject to change without notice.
3 4
GLG series
Description GLG-50-5XT
600mm(23.6")500mm(19.7")450mm(17.7")
Ø20012H7
360 degrees+30~-120 degrees
120Kgs60Kgs
α8/1FK7063/QSY155Bα8/1FK7063/QSY155Bα22/1FK7083/QSY155Cα4/1FK7060/QSY116Cα8/1FK7063/QSY116J
1PH8105-7.5kw/45Nm QAN200L 7.5kw/47.8NMαiI8 (7.5KW/47.7Nm)BT-40 (o.p. HSK-A63)
12000/15000/18000 rpmHSKA63 / 20000/24000rpm
BT-30 / 30000rpm100~450mm(3.9"~17.7")
560mm(22")
260x250x200cm(102.4"x98.4"x78.7")
GLG-70-5XT
800mm(31.5")700mm(27.6")600mm(23.6")LCM from Italy LCM from Italy
Ø50014H7
360 degrees+30~-120 degrees
500Kgs500Kgs
α22/1FK7083/QSY155Cα22/1FK7083/QSY155Cα22/1FK7083/QSY155Cα8/1FK7063/QSY155Bα22/1FK7083/QSY155B
1PH8107-10.5kw/50Nm QAN200U 10kw/63.7NMαiI12 (11KW/70.0Nm)BT-40 (o.p. HSK-A63)
12000/15000/18000 rpmHSKA63 / 20000/24000rpm
BT-30 / 30000rpm100~600mm(3.9"~23.6")
785mm(30.9")
GLG-80 5XT
900mm(35.4")800mm(31.5") 600mm(23.6")
Ø600 / Square 50014H7
360 degrees+30~-120 degrees
500Kgs500Kgs
α30/1FK7101/QSY190C α30/1FK7101/QSY190C α30/1FK7101/QSY190C α8/1FK7063/QSY155B α22/1FK7083/QSY155B
1PH8133-15kw/96Nm QAN260M 15kw/96NMαiI15 (15KW/95.4Nm)BT-40 (o.p. HSK-A63)
12000/15000/18000 rpm HSKA63 / 20000/24000rpm
BT-30 / 30000rpm100~600mm (3.9"~23.6")
935mm(36.8")
260x250x200cm(102.4"x98.4"x78.7")
320x280x350cm(126"x110"x137.8")
40mmx12/40mmx12/40mmx1035x2set/35x2set/35x2set
40mmx12/40mmx12/40mmx1245x2set/30x4set/45x2set
50x12mm/50x12mm50x12mm45x2set/30x6set/45x2set
1~12,000 (Depending on controller)0.001mm
30/30/20 M/min , Option 48/48/30 M/min
SPECIFICATION
TRAVELX axis (mm/inch)Y axis (mm/inch)Z axis (mm/inch)TILTING TABLE Fix on X axis blockSize: DIA (mm) Width of T-slotRotary-axis(degree)Tilting-axis(degree)Max table load (Kgs)…………Horizontal positionMax table load (Kgs)…………Vertical positionAXES DRIVE MOTOR (FANUC/SIEMENS/HEIDENHAIN)X axis Servo Motor Y axis Servo Motor Z axis Servo Motor Rotary Axis Servo Motor Tilting Axis Servo MotorSPINDLE
Taper size – standard Spindle Speed - Direct DriveSpindle Speed - Built-in (Opt.)Spindle Speed - Built-in (Opt.)Spindle nose to table surface (mm/in)Spindle center to column surface (mm/in)FEEDRATECutting feedrate(mm/min) for X,Y,ZMin. input incrementRapid traverse rates (mm/min) X, Y, ZC3 class Ballcsrews (X/Y/Z) (Dia. x pitch) Linear roller guide X/Y/Z axes (mm)Machine Dimensions
Size: Width x Length x Hight (cm/in)
Spindle motor SIEMENSHEIDENHAINFANUC
5 Axis Simultaneous Machining Center
GLG-50-5XT
GLG-70-5XT
GLG-80 5XT
*All specifications and designs are subject to change without notice.
5 6
GLG seriesHigh-Performace designvertical machining center linear series
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
80 mm6 toothS451550 rpm500 mm/min150 cm3/min4 mm75 mm
MillingTool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451500 rpm150 mm/min170 cm3/min
DrllingTool diameterMaterialSpindle speed
M30x3.5S45300 rpm
TappingTRAVELX:1020m/m(40.1")Y:530m/m(20.8")Z:610 m/m(24")
GLG- 1020
Convenient control PanelMITSUBISHI CONTROLLER
Swing control panel 0-90º rotation.Easy to edit program.Portable MPG for convenient operation.
TRAVELX:610 m/m(24")Y:460 m/m(18.1")Z:480 m/m(18.8")
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
80 mm6 toothS451550 rpm500 mm/min150 cm3/min4 mm75 mm
Tool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451500 rpm150 mm/min170 cm3/min
Tool diameterMaterialSpindle speed
M30x3.5S45300 rpm
GLG- 610TRAVELX:760 m/m(29.9")Y:460 m/m(18.1")Z:480 m/m(18.8")
760
TRAVELX:860 m/m(33.8")Y:480 m/m(18.8") Z:500 m/m(19.6")
860Milling Drlling Tapping
Convenient control PanelSwing control panel 0-90º rotation.Easy to edit program.Portable MPG for convenient operation.
FANUC CONTROLLER
Speedy and Reliable A.T.C16 Tools Armless Type (st)Tool to Tool 7 Sec.BT40 / BT50 / HSK 63A24 / 30 Tools Arm Type (op)Tool to Tool 2.5 Sec.BT40 / BT5032 / 40 Tools Chain Type (op)Tool to Tool 1.8 Sec.BT40/BT50
Rigid Configuration DesignMighty MEEHANITE casting of all major components.Structure is analyzed by CATIA CAM and FEA(Finite Element Analysis)Strong Structure to extend rigidity, machining performance and long machine life
Precision Ball ScrewsX,Y,Z-axis with preload large Dia.
32mm pitch 12mm (st) GLG 850A40mm pitch 12mm (st) 16m/m (op) GLG 1000A
Direct drive Design provides to reduce friction heat and thermal growth to maintain rigidity, stability.
Heavy-duty Linear guidewaysX,Y, Z-axes Ball Linear GuidewayGuide rail with surface groundBall track zones hardenedFour guide blocks on each axis
High-efficiency SpindleBelt drive spindle speed 8,000rpm (standard)10,000rpm (option)Direct drive spindle speed 10,000rpm & 12,000 / 15,000rpmBuilt-in spindle speed 18,000rpm / 24,000rpm(op)
7 8
GLG seriesHigh-Performace designvertical machining center linear series
100% pitch error inspected by Laser unit. 100% dynamic traverse inspected.
All machines are measured by laser equipment to attain high positioning and repeated accuracy with pitch and backlash compensation.Reference Standards: VDI 3441
Testing the roundness by the ball bar tester.
PRODUCT INSPECTION
Speedy and Reliable A.T.C16 Tools Armless Type (st)Tool to Tool 7 Sec.BT40 / BT50 / HSK 63A24 / 30 Tools Arm Type (op)Tool to Tool 2.5 Sec.BT40 / BT5032 / 40 Tools Chain Type (op)Tool to Tool 1.8 Sec.BT40/BT50
Rigid Configuration DesignMighty MEEHANITE casting of all major components.Structure is analyzed by CATIA CAM and FEA(Finite Element Analysis)Strong Structure to extend rigidity, machining performance and long machine life
Heavy-duty Four Linear guidewaysAveraged distributing heavy loadingX,Y, Z-axes Roll Linear GuidewayGuide rail with surface groundBall track zones hardenedX axis : 6 guide blocksY axis : 8 guide blocksZ axis : 6 guide blocks
Precision Ball ScrewsX,Y,Z-axis with preload large Dia.
40mm pitch 12mm (st) 16m/m (op) Direct drive and Double nuts Design provides to reduce friction heat and thermal growth to maintain rigidity, stability.
High-efficiency SpindleBelt drive spindle speed 8,000rpm (standard)10,000rpm (option)Direct drive spindle speed (option)10,000rpm & 12,000 / 15,000rpmBuilt-in spindle speed (option)18,000rpm/ 24,000rpm/ 30,000rpm
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
100 mm8 toothS45850 rpm790 mm/min405 cm3/min5.7 mm90 mm
MillingTool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451400 rpm200 mm/min227 cm3/min
DrllingTool diameterMaterialSpindle speed
M30x3.5S45300 rpm
Tapping
TRAVELX:1300 m/m (51.1")Y:700 m/m(27.5")Z:650 m/m(25.5")
GLG- 1370
TRAVELX:1500 m/m (59")Y:750 m/m(29.5")Z:650 m/m(25.5")
GLG- 1575
Convenient control PanelSwing control panel 0-90º rotation.Easy to edit program.Portable MPG for convenient operation.
TRAVELX:1100 m/m (43.3")Y:700 m/m(27.5")Z:650 m/m(25.5")
GLG- 1170
9 10
GLG seriesHigh-Performace designvertical machining center linear series
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
125 mm8 toothS45850 rpm800 mm/min450 cm3/min5.7 mm100 mm
Tool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451400 rpm200 mm/min227 cm3/min
Drlling
Tool diameterMaterialSpindle speed
M36x4S45300 rpm
Tapping
Milling
TRAVELX:1600 mm (62.9")Y:800 mm(31.4")Z:730 mm(28.7")
GLG- 1680
GLG-1680
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
80 mm6 toothS451550 rpm500 mm/min150 cm3/min4 mm75 mm
MillingTool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451500 rpm150 mm/min170 cm3/min
DrllingTool diameterMaterialSpindle speed
M30x3.5S45300 rpm
Tapping
TRAVELX:1100m/m(43.3")Y:610m/m(24")Z:610 m/m(24")
GLG- 1166
Convenient control PanelMITSUBISHI CONTROLLER
Swing control panel 0-90º rotation.Easy to edit program.Portable MPG for convenient operation.
TRAVELX:1200 m/m (47.2")Y:610 m/m(24")Z:610 m/m(24")
GLG- 1266
11 12
GLG series
TRAVELX:1800 mm (70.8")Y:900 mm(35.4")Z:730 mm(28.7")
GLG- 1890
TRAVELX:2100 mm(82.6")Y:900 mm(35.4")Z:730 mm(28.7")
2190
TRAVELX:2500 mm(98.4")Y:900 mm(35.4")Z:730 mm(28.7")
2590
GLG-
GLG- Spindle drive motor (α22i+2 speed gear box)-1:4
560 NM In low spindle speed 1500rpm
140 NM In high spindle speed 8,000~10,000rpm
(op)
2 SPEED GEAR BOX
BT-40
BT-50
HSKmodelsizeabcdefg
634832
12.547.5926
1007550
20.02121529
63A 100A
TOOL HOLDER & PULL STUD
Tool diameter
MaterialSpindle speedFeed rateMetal removal rateCutting depthCutting wide
125 mm8 toothS45850 rpm800 mm/min450 cm3/min5.7 mm100 mm
Tool diameterMaterialSpindle speedFeed rateMetal removal rate
38 mmS451400 rpm200 mm/min227 cm3/min
DrllingTool diameterMaterialSpindle speed
M36x4S45300 rpm
TappingMilling
Speedy and Reliable A.T.CBT50 / HSK-A10024 Tools Arm Type (op)Tool to Tool 2.5 Sec.BT5032 / 40 Tools Chain Type (op)Tool to Tool 2.5 Sec.BT50
Rigid Configuration DesignMighty MEEHANITE casting of all major components.Structure is analyzed by CATIA CAM and FEA(Finite Element Analysis)Strong Structure to extend rigidity, machining performance and long machine life
Heavy-duty Six Linear guidewaysAveraged distributing heavy loadingX,Y, Z-axes Roll Linear GuidewayGuide rail with surface groundBall track zones hardenedX axis : 6 guide blocksY axis : 12 guide blocksZ axis : 6 guide blocks
Precision Ball ScrewsX,Y,Z-axis with preload large Dia.
50mm pitch 12mm (st) 16m/m (op) Direct drive and Double nuts Design provides to reduce friction heat and thermal growth to maintain rigidity, stability.
High-efficiency SpindleBelt drive spindle speed 8,000rpm (standard)10,000rpm (option)Direct drive spindle speed (option)10,000rpm & 12,000rpmBuilt-in spindle speed (option)18,000rpm/ 24,000rpm/ 30,000rpm
13 14
GLG seriesITEMTABLE
Table Size
Working Area
Spindle center to column surfaceX.Y.Z. Axis Ball screws diaSPINDLESpindle tapperSpindle speed - standard access
FEEDRATECutting Feedrate (X, Y, Z axis)3Axes SlidewaysRapid Traverse Rates (X/Y/Z axis)ATCCapacity-standard access.Capacity-optional access.(ARM)Tool SelectionMaximum tool diameter x lengthMaximum tool weightAir Power requiredTool ShankMOTORSpindle drive MotorLINEAR BALL SLIDEX/Y/Z axisCarriage guide block-per axisCoolant PumpPower SupplyNET WEIGHTDIMENSIONABCDE (Belt/Direct Spindle)
Tee slots (CD x W x NO)Table load (maximun)TRAVELX-axisY-axisZ-axis
Spindle nose to table surface
UNIT
MM(inch)
MM(inch)
MM KG(Ibs)
MM(inch)MM(inch)MM(inch)
MM(inch)
MM(inch)MM
RPM
RPM
MM/MIN
MM/MIN
PCSPCS
MM(inch)KG(lbs)
KW(HP)
HP
KG(lbs)
cmcmcmcmcm
BT 40 / CAT 40 (opt: BT 50)
opt 8,000 / 10,000 / 12,000 rpm-Direct driveopt 12,000/ 15,000 rpm -Built-in
BT 50 / CAT 50
1-10000(Depending Controller)
24/24/24LINEAR BALL SLIDE, opt: LINEAR ROLL SLIDE
24 (Arm)32/40(Chain Type), 30(Arm) 32/40(Chain Type)
16(Armless)24/30(Arm), 32/40(Chain Type)
24(Arm)
Bi-directional & min.pathArmless Type: 80 x 250(3.1"x9.8"), Arm Type: 80 x 250(3.1"x9.8")
Armless 6(13.2) / Arm 8(17.6)6KG/cm2
Std: 7.5KW(10HP), opt: 11KW(15HP)
BT40, ISO40 or CAT40 (Option) BT50, ISO50 or CAT50
Std: 15KW(20HP), opt: 2 speed gear box 11KW(15HP)
1/2STD: 20KVA 25KVA 30KVA 35KVA
8,000(std)/ 10,000(opt)-Belt driveBT40 8,000 / 10,000 / 12,000 BT50 8,000 / 10,000
610(24")460(18.1")480(18.8")100-580
(3.9"-22.8")500(19.6")
BT 40 / CAT 40
1-10000(Depending Controller)
30/30/24
4500(9900) 5300(11660)
GLG-610
700x 460(27.5" x 18.1")
610x 460(24" x 18.1")
CD100 x 18 x 3300(660)
GLG-860
860(33.8")480(18.8")500(19.6")100-600
(3.9"-23.6")520(20.4")32xpitch12
960 x 460(37.7"x18.1")
860 x 480(33.8"x18.8")CD 100x18x3
600(1320)
GLG-1020
1020(40.1")530(20.8")610(24")100-710
(3.9"-27.9")550(21.6")40xpitch12
1100(43.3")610(24")610(24")100-710
(3.9"-27.9")645(25.4")40xpitch12
1100 x 510 (43.3"x20")1020x530
(40.1"x20.8")CD 100x18x4
800(1760)
GLG-1166
1200 x 560 (47.2"x22")1200x600
(47.2"x23.6")CD 100x18x5
900(1980)
1200(47.2")610(24")610(24")100-710
(3.9"-27.9")645(25.4")40xpitch12
GLG-1266
1300 x 560 (51.1"x22")1300x600
(51.1"x23.6")CD 100x18x51000(2200)
32/12 Pitch-16mm(opt)
BT30 / BT40BT30 / 12,000 / opt 15,000 (Belt drive) Direct drive 15,000/20,000 rpm
opt BT40 10,000/12,000/15,000-Direct drive BT50 10,000/12,000-Direct driveopt BT40 16,000/20,000/24,000/30,000-Built in BT 50 12,000/15,000/20,000 – Built in
1-10000(Depending Controller)LINEAR BALL SLIDE
30/30/24 / opt 48/48/24
Armless: 80 x 250 (3.1"x9.8")Armless6(13.2) / Arm 8(17.6)
BT30/ISO30/BT40/ISO40/CAT40
Bi-directional & min. path
6kg / cm2
25x2sets / 30x2sets/30x2sets4 / 4 / 4 blocks
30x2sets/30x2sets/30x2sets 35x2sets/35x2sets/35x2sets6 / 8 / 6 blocks
15KVA 15KVA 20KVA3500(7700)
GLG-1170
1100(43.3")700(27.5")650(25.5")100-750
(3.9"-29.5")765(30")40xpitch12
6600(14520)
1200 x 650(47.2"x25.5")1100 x 650
(43.3"x25.5")CD 100x18x51100(2420)
45x2sets/30x4sets/45x2sets
29522519084
310/320
GLG-1370
1300(55.1")700(27.5")650(25.5")100-750
(3.9"-29.5")765(30")40xpitch12
7100(15620)
1400 x 650(55.1"x25.5")1200 x 700
(47.2"x27.5")CD 100x18x51300(2860)
29523320084
310/320
GLG-1575
1500(59.1")750(29.5")650(25.5")100-750
(3.9"-29.5")765(30")40xpitch12
7500(16500)
1600 x 650(62.9"x25.5")1500 x 750
(59.1"x29.5")CD 100x18x51500(3300)
38023320084
310/320
26019018080
272/282
27021218080
272/282
27221818084
272/282
5300(11660)20KVA
28021818084
272/282
5300(11660)20KVA
28021818084
272/282
GLG-1680
1600(62.9")800(31.4")700(27.5")110-840
(5.1"-35.8")965(37.9")50xpitch12
12500(27500)
1700 x 800(66.9"x31.4")1600 x 800
(62.9"x31.4")CD 100x18x82000(4400)
54025021086
330/340
GLG-1890
1800(70.8")900(35.4")730(28.7")110-840
(5.1"-35.8")965(37.9")50xpitch12
13500(29700)
1900 x 800(74.8"x31.4")1800 x 900
(70.8"x35.4")CD 100x18x82500(5500)
59025021086
330/340
GLG-2190
2100(82.6")900(35.4")730(28.7")110-840
(5.1"-35.8")965(37.9")50xpitch12
17200(37840)
2200 x 800(86.6"x31.4")2100 x 900
(82.6"x35.4")CD 100x18x83000(6600)
63025021086
330/340
40KVA
GLG-2590
2500(98.4")900(35.4")
730(28.7")opt110-840
(5.1"-35.8")965(37.9")50xpitch12
21000(46200)
2600 x 800(102.3"x31.4")
2500 x 900(98.4"x35.4")CD 100x18x84000(8800)
75031021086
330/340/opt 380
STANDARD ACCESSORIES OPTIONAL ACCESSORIESTool BoxCall LightWork Lamp Belt Drive 8000rpmChip Enclosure Coolant SystemGuideway CoverDraw-type Chip tank/water tank GLG-610/GLG-760/GLG-860
Screw type chip conveyer-GLG-1020/1070/1100/1270/1570/1680/1890/2090Cutting Air Blast Auto Lube SystemLeveling Blocks And BoltArmless ATC 16T for allMechanical, Electrical & Operating ManualSpindle Cooling System for GLG-1020/1070/1100/1270/1570/1680/1890/2090
Remarks: If Chain Type ATC installed, the max. tool dia. is 75mm when full pocket.
CETranformerFlood CoolantBelt drive 10000/(GLG-610,760,860,1020)12000 rpmDirect drive Spindle BT40/HSK63A: 10000/12000/15000/18000 rpm
BT50/HSK100A: 8000/10000/12000 rpmBuilt-in drive Spindle BT40/HSK63A: 18000/24000/30000 rpm
BT50/HSK100A: 8000/10000/12000 rpmCoolant Thru Spindle4th Axis Rotary TableCoolant Thru Tool TipChip Conveyor System
a.b.c.d.
d-1.
d-2.
e.f.g.h.
TS27R Tool Setting Probe (Length Measurement)MP10/12 Inspection Probe KitsARMLESS A.T.C.: 20/24 TOOLSARM Type ATC: BT40 24 Tools/ 30 Tools/ 40 Tools
BT50 24 Tools/ 30 ToolsA.T.C. (CHAIN TYPE) Tool to Tool (1.8sec)ZF 2 Speed Gear Box for spindleSpindle Cooling SystemTailstock & ChuckLaser tool measuringScrew Type Chip Conveyer(GLG-610,760,860)
i.j.k.l.
m.o.p.q.r.s.
SPECIFICATION
DIMENSION
Belt DriveDirect DriveBuilt-in Drive
Compatible with various types of spindles
Std: 7.5KW(10HP), opt:11KW(15HP)Std: 5.5/7.58KW 7.5HP
45x2sets/45x2sets/45x2sets 45x2sets/30x6sets/45x2sets6 / 6 / 6 blocks 6 / 12 / 6 blocks
*All specifications and designs are subject to change without notice.